Stupid fix for the problem:

I think I have found a solution. After all, the route is now set correctly. I have simply created another static route which has the IP network of the Wireguard VPN. So 10.13.37.0/24. This route is useless in itself, but I can copy it and adapt the IP to my required network 192.168.1.0/24. After a s...

Assuming Site B is acting as a client to Site A with Wireguard connected over IPv6, it seems like it should work. Yes Site B acting as client. I also thought this should work, but somehow either a configuration is missing or I have found a bug. Site B has keep-alive configured? Yes 25sec The static...

Hello forum, I have set up a site-to-site VPN with Wireguard. Here are the facts: SITE A: - OPNsense Firewall - LAN IP network 192.168.1.0/24 - Wireguard IP 10.13.37.1/24 - Public IPv6 - No public IPv4 - Public DNS entry available (sitea.domain.com) SITE B - MikroTik RB5009 - LAN IP network 192.168....

If I call up the IP check from DeDyn, for example, I get this error: Yes, this is a problem where fetch fails with ipv6-only addresses. Reported as SUP-134908. Received any answer and support as aware, but no solution, yet. Okay, thanks for the info. At least a bug has already been recognized here ...

I did the update to RouterOS 7.13 on my RB5009 yesterday. So far everything has gone well. Today, however, when I tried to connect to my home network via Wireguard I found that I couldn't get a connection. After a check, I realized that the router has problems reaching IPv6 addresses. When updating ...

Yes, I'll have a look at the tool.
I can install more containers on my Proxmox server.
But I also just noticed that I have a Docker container with nginx Prox Manager.
It can forward UDP traffic.
... I'll try it first

@loloski Too bad that it doesn't support MikroTik yet :( @Kentzo That is a good suggestion. Tested it briefly and found that 6tunnel can only do TCP, but not UDP. My traffic is UDP unfortunately. Just tried it with socat too socat UDP6-RECVFROM:8282,fork UDP4-SENDTO:127.0.0.1:8280 ... but did not wo...

Hello! I have a question about the configuration of RouterOS. I have an application which currently only supports IPv4. This runs on my network and should be publicly accessible. So that the access via e.g. mobile works great, I would like to allow IPv6 as well. How can I build step by step one rule...