Community discussions

MikroTik App

Search found 42 matches

by Testingpepe
Mon Jan 14, 2008 2:34 pm
Forum: General
Topic: Firewall info/question
Replies: 2
Views: 1270

Re: Firewall info/question

There is a lot of established and related state, so if you want to this to work better change the order of your rules. First drop then allow that gonna solve your problem.
by Testingpepe
Mon Jan 14, 2008 2:16 pm
Forum: General
Topic: Trying to add new internet gateway but......jam!
Replies: 0
Views: 514

Trying to add new internet gateway but......jam!

Ok, i want to add a new gateway to use with some clients, lets say, my ESPECIAL clients got to go trough gateway B and all de others trough gateway A, I do all the configuration but there is a mistake that I cannot find. So, I put the config here and if you can mark the erros. tnks /ip address # ADD...
by Testingpepe
Fri Jun 15, 2007 10:08 pm
Forum: Wireless Networking
Topic: RB532a + 2 SR2 whit CCQ problem
Replies: 9
Views: 1428

Re: RB532a + 2 SR2 whit CCQ problem

I tryed whit only 1 card and nothing, the CPE's are Teletronics and Edimax (think this use atheros chips)
by Testingpepe
Fri Jun 15, 2007 9:56 pm
Forum: Wireless Networking
Topic: RB532a + 2 SR2 whit CCQ problem
Replies: 9
Views: 1428

Re: RB532a + 2 SR2 whit CCQ problem

Channel 2412 and 2462 there is no interference problem. The thing is that whit other wireless cards like cm9 or old prism2 everything works just fine, i only have this issue whit ubiquiti cards. When the SR2 dont work i buy XR2 to try it but the problem is worse, now only the 5 more close clients co...
by Testingpepe
Thu Jun 14, 2007 5:19 pm
Forum: Wireless Networking
Topic: RB532a + 2 SR2 whit CCQ problem
Replies: 9
Views: 1428

Re: RB532a + 2 SR2 whit CCQ problem

Already try the static ACK and all the clients have exelent LOS and the distance is not more than 2 km.
by Testingpepe
Thu Jun 14, 2007 7:28 am
Forum: Wireless Networking
Topic: RB532a + 2 SR2 whit CCQ problem
Replies: 9
Views: 1428

RB532a + 2 SR2 whit CCQ problem

Hi, im working whit 2 AP whit same hardware configuration and same issue. The RB532a has 2 SR2 in ap bridge mode whit 30 clients each and the internet backbone comes from ethernet interface. Everything works just fine (fine is a way to say it) the power of the clients goes from -58 dBm to -72 dBm an...
by Testingpepe
Wed May 23, 2007 6:16 pm
Forum: General
Topic: Proxy server redirection
Replies: 6
Views: 1361

Errors, thats all i got. Remember that the clients are behind a nated network and the webproxy is in the public network. When I use that rule the i get errors. Maybe im doing something wrong?
by Testingpepe
Thu May 17, 2007 9:02 pm
Forum: General
Topic: Proxy server redirection
Replies: 6
Views: 1361

Tip: the clients are behind a NATed network thats why i have to use the web proxy of the MT
by Testingpepe
Thu May 17, 2007 8:15 pm
Forum: General
Topic: Proxy server redirection
Replies: 6
Views: 1361

Yes, I know....im working in that way right now but im asking if there is a way to make MT to not process any request just pass to the parent server.
by Testingpepe
Thu May 17, 2007 5:10 pm
Forum: General
Topic: Proxy error
Replies: 0
Views: 473

Proxy error

So, my other thread dont make any results so lets try whit another question. I make the other thread because of this error, when the client is surfing sometimes (sometimes=in a hour can happend 3 to 4 times) the requested pages results in this error: * Unable to forward this request at this time. Th...
by Testingpepe
Wed May 16, 2007 5:52 pm
Forum: General
Topic: Proxy server redirection
Replies: 6
Views: 1361

Proxy server redirection

Hi guys, my question is how to make MT dont realy use WebProxy only use the service to redirect all to the external Squid box i have. Let me try to explain what i want, I have a real good Squid box at my external net in a fedora box and want to make all the client use it. In this moment they are usi...
by Testingpepe
Mon May 14, 2007 6:52 pm
Forum: General
Topic: Marked Packets and 2 gateways
Replies: 2
Views: 773

So, it is posible to use the same connection_mark, last question...has to be in that order or i can put the routing mark in the last place? obviusly changing the passtrough mark.
by Testingpepe
Thu May 10, 2007 11:53 pm
Forum: General
Topic: Marked Packets and 2 gateways
Replies: 2
Views: 773

Marked Packets and 2 gateways

Hi, I have marked packets like this: 4 chain=prerouting protocol=tcp dst-port=80 action=mark-connection new-connection-mark=http_conn passthrough=yes 5 chain=prerouting connection-mark=http_conn action=mark-packet new-packet-mark=http passthrough=no I use that type of mark to make QoS and now i want...
by Testingpepe
Thu Apr 19, 2007 5:57 pm
Forum: General
Topic: Silly question
Replies: 2
Views: 726

remake

ether1 - wds1(wlan1) ->bridge1
ether2 - ???(wlan1) ->bridge2
by Testingpepe
Thu Apr 19, 2007 5:16 pm
Forum: General
Topic: Silly question
Replies: 2
Views: 726

Silly question

Hello, this is my problem. Can i share one interface in to diferent bridges??? Explanation: ether1 - ether2 - wds1 Trying to do (but not tested yet): ether1 - wds1 ->bridge1 networkA ether2 - wds1 ->bridge2 networkB It is posible?? My brain is saying YES YES but dont want to try whitout any confirma...
by Testingpepe
Tue Aug 08, 2006 7:42 pm
Forum: General
Topic: P2P the battle for control
Replies: 29
Views: 7702

I use that solution because trying to control them (so far) is not possible. So I block it, but is not working like a full block, then is like a way of control. I think. For the other things you say I dont understand what you want to expose.
by Testingpepe
Tue Aug 08, 2006 5:58 pm
Forum: General
Topic: P2P the battle for control
Replies: 29
Views: 7702

I dont find the final solution, that's why I start this topic. This is the one Im using now: Mangle 0 chain=prerouting protocol=tcp p2p=all-p2p action=mark-packet new-packet-mark=p2p passthrough=yes 1 chain=prerouting protocol=udp p2p=all-p2p action=mark-packet new-packet-mark=p2p passthrough=yes Fi...
by Testingpepe
Mon Aug 07, 2006 5:34 pm
Forum: General
Topic: P2P the battle for control
Replies: 29
Views: 7702

MacGiver, give us some more detailed explanation about your way of control. Seems like is a good solution in the mean time(mean time - mientras tanto o algo asi :P ) mikrotik resolve how to shape this traffic. This Topic was 80% about politics of services but that is not the purpose of the topic.......
by Testingpepe
Fri Aug 04, 2006 11:45 pm
Forum: General
Topic: P2P the battle for control
Replies: 29
Views: 7702

I dont share your thought but is a valid way to resolve the problem, dont worry about resources thats not the problem. I only ask for another way of control, not for 100% of control but the best who any as used.
by Testingpepe
Fri Aug 04, 2006 10:38 pm
Forum: General
Topic: P2P the battle for control
Replies: 29
Views: 7702

UniKym: you dont want your customers think you are a dictator, im a ISP and have the power to terminate customers but i dont want to be like Fidel Castro, just want to control them, giving them the feeling that they can do whatever they want but controling them so they do what they whant but in my w...
by Testingpepe
Fri Aug 04, 2006 8:47 pm
Forum: General
Topic: P2P the battle for control
Replies: 29
Views: 7702

P2P the battle for control

Ok, let's start this new topic and concentrate all our knowledge (or only your knowledge) here. I spend 6 hours reading about the control (limiting and blocking) of P2P connections but nothing seems to work well.......so, all i want is all of your experiences and what you do to manage this big probl...
by Testingpepe
Thu Feb 23, 2006 7:16 pm
Forum: General
Topic: SNMP
Replies: 1
Views: 1056

SNMP

Hi, i need some directions.......want to make a script for snmp queries and dont know what is the oid_index and the oid_num_index......I do print oid on every place but cant find that values. This values are on a script and make reference to the oid's: 1.3.6.1.2.1.2.2.1.1 1.3.6.1.2.1.2.1.0 any suges...
by Testingpepe
Fri Dec 09, 2005 12:49 am
Forum: Wireless Networking
Topic: Extensive data loss
Replies: 17
Views: 14992

The solution I use is to set the frequency mode to "manual tx power", and the tx power to "all rates fixed".
Hope this work for you.
by Testingpepe
Tue Nov 29, 2005 3:58 pm
Forum: General
Topic: webproxy and queue problem
Replies: 10
Views: 2614

yes me understand.....but, if I put the target address whit interface ether2(internet) the queue dont count the traffic and if I put it whit interface wlan3(internal) the downstream is the upstream and vice versa.
I dont know if I explain ......
by Testingpepe
Mon Nov 28, 2005 10:28 pm
Forum: General
Topic: webproxy and queue problem
Replies: 10
Views: 2614

you mean.................
by Testingpepe
Mon Nov 28, 2005 9:44 pm
Forum: General
Topic: webproxy and queue problem
Replies: 10
Views: 2614

Same problem here.....simple queues stop working when I enable de webproxy. Try everything and nothing works, the problem persist........
by Testingpepe
Fri Nov 11, 2005 5:52 pm
Forum: General
Topic: Question
Replies: 0
Views: 584

Question

I know this is a stu*id question but.......what is the diference between Wireless and Wireless Legacy.
by Testingpepe
Mon Nov 07, 2005 10:15 pm
Forum: General
Topic: Upload problem
Replies: 0
Views: 644

Upload problem

Hi, I have a new problem......this time is the upload rate......I have a E1 connection but the upload rate is 20kbps :shock: , this is from the internal network if I bypass the mikrotik the upload works just fine whitout any problem........Test to do, rules to change give me some directions please.
by Testingpepe
Sat Oct 01, 2005 4:07 pm
Forum: General
Topic: OK, this is a REAL problem
Replies: 17
Views: 3911

when I apply the queue tree, the simple queue stop working and only apply to the packets the rules on the queue tree.
by Testingpepe
Fri Sep 30, 2005 11:48 pm
Forum: General
Topic: MUM (MikroTik User Meeting) info!
Replies: 7
Views: 2501

OK, Im interested to go but Im at argentine......there must be some king of lottery or something to give a free fly to the MUM convention. If there is one give me a number :lol:
by Testingpepe
Fri Sep 30, 2005 11:27 pm
Forum: General
Topic: OK, this is a REAL problem
Replies: 17
Views: 3911

lets beging to clarify this.....I mark packets: group A(all the wireless clients) and group B the interface ether2. I make a queue tree were I limit group A to 1500 and group B to 500. The problem is that the group who share the 1500 has a simple queue to use 128, 256 or other but when I make the qu...
by Testingpepe
Fri Sep 30, 2005 11:01 pm
Forum: General
Topic: OK, this is a REAL problem
Replies: 17
Views: 3911

dont work......still the same
by Testingpepe
Fri Sep 30, 2005 10:34 pm
Forum: General
Topic: OK, this is a REAL problem
Replies: 17
Views: 3911

2.8.28 .......dont do a upgrade because I dont need it
by Testingpepe
Fri Sep 30, 2005 10:24 pm
Forum: General
Topic: OK, this is a REAL problem
Replies: 17
Views: 3911

sorry for my write Im argentine.......I mean that I want all the 3 WLAN cards to consume a total of 1500kbps, I dont care if one of them consume 1200kbps and 300kbps the other two.
by Testingpepe
Fri Sep 30, 2005 9:44 pm
Forum: General
Topic: OK, this is a REAL problem
Replies: 17
Views: 3911

yes, but I want the sumarize of the traffic of the 3 wlan card use only 1500kbps
by Testingpepe
Fri Sep 30, 2005 7:38 pm
Forum: General
Topic: OK, this is a REAL problem
Replies: 17
Views: 3911

but if the ether2 dont consume the 512kbps the clients run out the 2mbps and I only want to give them 1500kbps....
by Testingpepe
Fri Sep 30, 2005 7:09 pm
Forum: General
Topic: OK, this is a REAL problem
Replies: 17
Views: 3911

OK, this is a REAL problem

Configuration map: Ether1 - Internet connection Ether2 - LAN 192.168.33.0/24 Wlan1 - WLAN 192.168.3.0/24 Wlan2 - WLAN 192.168.2.0/24 Wlan3 - WLAN 192.168.1.0/24 Wlan1, Wlan2 and Wlan3 NAT to a external IP on Ether1 Ether2 NAT to another external IP on Ether1 The clients are in the 3 Wlan cards.....a...
by Testingpepe
Thu Sep 29, 2005 9:04 pm
Forum: General
Topic: Packet mangling and traffic control
Replies: 6
Views: 1857

I try it but still having the same problem
by Testingpepe
Thu Sep 29, 2005 7:06 pm
Forum: General
Topic: Packet mangling and traffic control
Replies: 6
Views: 1857

Packet mangling and traffic control

Ok, this is the problem......I want to divide my 2Mbps in two groups, one whit 1,5Mbps and the other whit 512Kbps. Im trying to use packet mangling and the queue trees.....for the group of 1,5Mbps y have a big list of simple queues to asignate ah specific bandwidth to each client. I make the groups ...
by Testingpepe
Tue Aug 30, 2005 4:56 pm
Forum: General
Topic: Seting outside proxy
Replies: 5
Views: 1367

But if I activate the internal proxy there is some lag.......I can use the web proxy to redirect transparently whitout the mikrotik trying to do cache or something???
I want to go directly to the external proxy and don't want the mikrotik to process the data.
by Testingpepe
Tue Aug 30, 2005 4:28 pm
Forum: General
Topic: Seting outside proxy
Replies: 5
Views: 1367

yes......I do that....the rule was src-address=0.0.0.0/0:0-65535 in-interface=ether1 dst-address=:80 protocol=tcp icmp-options=any:any flow="" limit-count=0 limit-burst=0 limit-time=0s action=redirect to-dst-address="external ip" to-dst-port=3128 That's in 2.8 version, today im going to change to 2....
by Testingpepe
Tue Aug 30, 2005 4:15 am
Forum: General
Topic: Seting outside proxy
Replies: 5
Views: 1367

Seting outside proxy

Hello, I have 3 internal networks: 192.168.1.0/24 - 192.168.2.0/24 - 192.168.3.0/24 and set up a Squid proxy at another machine. I put the machine on the internet side whit a external ip, all seems to be alright....everything works but when I try to redirect de petitions to port 80 from the internal...