With ether1 disconnnected?So: Netwatch disabled, mangle disabled, LTE enabled: both 8.8.4.4 and 8.8.8.8 works., got back all the answers no timeout
interface=$"iface"
, thanks.
Port Settings
PoE-Out can be configured under the menu. Each port can be controlled independently.
I thought that the point was more like improvise, adapt, overcome, let it beImproving, learning, experimenting, maintaining, monitoring -- that's the whole point.
(i.e. have the d@mn network running, then leave it alone until/if it breaks 
) .I instead suspect that there are plenty of people doing even more foolish things, only they don't have the ingenuity (or the guts) to publicly admit doing them.
I think I speak for almost everyone,
writing that there is no one who does such a foolish thing.
delay 10sGood.It works now with IPv4 Fullstack ! Thanks for the help.
Unless there is some other trick, I don't think so, If it is the same attack as on the given link the admin user is prevented from opening Terminal.Make an export if possible, that will help you reconfigure after netinstall.
No idea, but you should post again your current configuration, so that some members experienced with VLANs (and VAPs) may give you some more hints/advices.Do you think that is a valid strategy?
#Hypothetical syntax
/interface ethernet switch
set switch1 mirror-source1=ether2 mirror-source2=ether4 mirror-source3=ether4 mirror-target=ether3 mirroring1=egress mirroring2=ingress mirroring3=bothYou sin in thinking bad about people - but, often, you guess right.
:Judging from the reports I have seen on the forum, the worst case seems to be the normality...... or causes random problems (worst case).
Well, that is what is generally referred to as "wishful thinking":About docker on mipsbe I'vefound this topic, but doesn't report the way to obtain it:
viewtopic.php?t=187595
It would be nice if you could describe exactly what the error(s) and the correction(s) were, so that this thread may become useful as a reference for similar issues.I made a mistake in the last step — datapath configuration. I fixed it and it worked
Good to know, thanksYou can also use "/system/script export where name=XXXX" to get the "escaped form" of any script (and then cut-and-paste that as needed).
. commonly call "looking for troubles".
JFYI, in Mikrotikish "stable" has a somehow different meaning than "production ready".Now we are waiting for the Stable version before officially using it into production.
(which I doubt is a typical AP )/log print