Community discussions

Search found 480 matches

  • 1
  • 2
by rado3105
Sat Jan 12, 2019 1:12 pm
Forum: RouterBOARD hardware
Topic: EU and approvment of LHG 60? [SOLVED]
Replies: 8
Views: 1726

EU and approvment of LHG 60? [SOLVED]

Are true rumours that EU didnt certified Mikrotik LHG 60 and wont in future?
by rado3105
Sun Dec 23, 2018 5:23 pm
Forum: General
Topic: Examples of using RAW firewall?
Replies: 28
Views: 7715

Re: Examples of using RAW firewall?

I want to use some ip (it is in firewall as forward chain), Can I use raw with prerouting and it will do the same?
by rado3105
Sun Dec 23, 2018 1:49 am
Forum: General
Topic: Dual 1Gbit ethernet network card?, like rb44ge?
Replies: 0
Views: 232

Dual 1Gbit ethernet network card?, like rb44ge?

I cant anywhere find rb44ge.
I was trying intel 1000 dual nic but there are ping lostst and instability.
Can you recommend any dual 1gbit/s network ethernet card to pci-express compatible with routeros?
thanks
by rado3105
Thu Nov 29, 2018 12:37 pm
Forum: Wireless Networking
Topic: Wap 60G problems in winter, disconnects
Replies: 5
Views: 672

Re: Wap 60G problems in winter, disconnects

I also tryed 64800 and it was worse..why you think lower channels are better?
signal before freeze winter was 80, now is worse...
by rado3105
Thu Nov 29, 2018 11:21 am
Forum: Wireless Networking
Topic: Wap 60G problems in winter, disconnects
Replies: 5
Views: 672

Wap 60G problems in winter, disconnects

Yesterday evenning started first freezing weather, temperature below -5st.C and the units started disconnects and connects. Rapid changing in signal, RSSI...Nothing other happened, nothing new in the way. It seems like there is problems with frost on the units. What are experiences of others? Distan...
by rado3105
Thu Nov 08, 2018 5:01 pm
Forum: General
Topic: Renamed interfaces, problems to restore configuration on x86
Replies: 0
Views: 240

Renamed interfaces, problems to restore configuration on x86

Everytime I change ethernet cards, or x86 router...there is problem with backup restoration. Full backup restore or compact is not possible. I had to load compact and every command in text document past in terminal. Also it is not possible to put it there everything at once, it freezes. This problem...
by rado3105
Tue Aug 07, 2018 1:05 am
Forum: RouterBOARD hardware
Topic: LHG 60G
Replies: 63
Views: 13732

Re: LHG 60G

I have one link usin LHG 60 on 900m. During very heavy rain, which took a part for 5 minutes LHG went completely down. So in 60G propably maximal recommended distance would be 1km...
by rado3105
Sun Jun 24, 2018 7:05 pm
Forum: Wireless Networking
Topic: LHG 60G - how L4 LICENCE?
Replies: 7
Views: 913

LHG 60G - how L4 LICENCE?

Is possible to buy L4 licence for LHG 60G? Thanks
by rado3105
Mon Jun 18, 2018 1:00 am
Forum: General
Topic: Content= - high CPU load
Replies: 0
Views: 233

Content= - high CPU load

I had 3 mangle rules that used content filtering and it massively used CPU. Is any better alternative for content filtering?
by rado3105
Sun Apr 01, 2018 10:29 pm
Forum: General
Topic: Virtual RouterOS and license after copying virtual .VDI
Replies: 1
Views: 280

Virtual RouterOS and license after copying virtual .VDI

If I have virtual RouterOS - want it for dude and bandwitch tests. How it is with license. Is it connected to .vdi? Because sometimes it happened that I just need to copy .vdi to other machine (after hardware failure, reinstall). What happens with license? Is it lost or it is still working?
by rado3105
Wed Jan 24, 2018 1:09 pm
Forum: RouterBOARD hardware
Topic: rb44ge is ok to use it in pci-E 1x,
Replies: 12
Views: 1749

Re: rb44ge is ok to use it in pci-E 1x,

I started to have problem with rb44ge during high load, about 300Mbit/s and 20 000pps. Does anybody know how much pps can go through rb44ge?
by rado3105
Wed Jan 24, 2018 12:53 pm
Forum: The Dude
Topic: Routeros update, but not bootloader, how to solve it?
Replies: 1
Views: 565

Routeros update, but not bootloader, how to solve it?

Hi, I was trying to use dude to update routeros, but it didnt upgraded bootloader and I had many times problems with old bootloader.

Is anyway to mass upgrade bootloader using dude?
by rado3105
Wed Jan 17, 2018 1:30 am
Forum: Wireless Networking
Topic: NV2 in LHG 5ac is not working
Replies: 2
Views: 557

NV2 in LHG 5ac is not working

viewtopic.php?f=7&t=128916&p=637268#p637268

nv2 is not working, also there is not possible to upgrade LHG 5ac from 6.41 to 6.42.rc9
by rado3105
Wed Jan 17, 2018 1:17 am
Forum: Wireless Networking
Topic: SXTsq 5 ac. WTF? It doesn't work.
Replies: 80
Views: 15668

Re: SXTsq 5 ac. WTF? It doesn't work.

nv2 ap 6.42.rc9, klient lhg 5ac 6.41
low connection parametres, no ping, connected but not working...
by rado3105
Wed Jan 17, 2018 1:06 am
Forum: Wireless Networking
Topic: SXTsq 5 ac. WTF? It doesn't work.
Replies: 80
Views: 15668

Re: SXTsq 5 ac. WTF? It doesn't work.

Same problem here, with LHG 5AC.

I cant upgrade LHG 5ac from 6.41 to 6.42.rc9. I tryed using system/packages - download and install after reboot there is still 6.41. I also tryed copy ros file using ssh filezilla but also the same.

Also there is missing download file for LHG 5ac on mikrotik site.
by rado3105
Fri Jul 14, 2017 12:11 am
Forum: General
Topic: Examples of using RAW firewall?
Replies: 28
Views: 7715

Examples of using RAW firewall?

What kind of traffic do you filter using RAW. I cant find anything interesting except SSH block login users using RAW. Can you give me some idea? do you use it?
by rado3105
Wed Jul 12, 2017 2:31 am
Forum: General
Topic: RoS restore to new hardware ERRRORS
Replies: 1
Views: 269

RoS restore to new hardware ERRRORS

I have problems restoring configuration from one routerboard to another one. This happens everytime I chane slower router for better. I tryed export and import.rsc and it shows errors like this: failure: already have device with such name but from what is there written I cant find out where it stops...
by rado3105
Sat Feb 04, 2017 2:11 am
Forum: Wireless Networking
Topic: MU-MIMO?
Replies: 24
Views: 8040

MU-MIMO?

Any news about mu-mimo and Mikrotik? Do you plan any routerboards suppporting MU-MIMO? When?
by rado3105
Tue Jan 24, 2017 8:36 am
Forum: General
Topic: SSH communication in MIkrotik, how to generate RSA key
Replies: 4
Views: 2106

Re: SSH communication in MIkrotik, how to generate RSA key

can mikrotik run script via ssh to remote mikrotik?? i really need to know, i have tried ssh-key on Ubuntu-to-Mikrotik and its working fine, but Mikrotik-to-Mikrotik its asking password and not passing through.. need feedback from anyone please /ip ssh set always-allow-password-login=yes in what ve...
by rado3105
Wed Jan 11, 2017 7:38 pm
Forum: General
Topic: Mark MS services, updates?
Replies: 3
Views: 1084

Mark MS services, updates?

Can anybody help what is best way to mark and limit MS services like updates and so on..?
by rado3105
Mon Nov 14, 2016 8:28 am
Forum: Wireless Networking
Topic: Mimosa and first PtM with MU-MIMO
Replies: 19
Views: 4324

Re: Mimosa and first PtM with MU-MIMO

We installed our first Mimosa A5 last week and hooked now some 35 SXT's on it. Last night I finally could do some test with several clients each capable of 25mbs (limit by simple queue in central) Allthough compared to the Omnitik previously running 25 clients that could not produce more than some ...
by rado3105
Sun Nov 13, 2016 10:41 pm
Forum: General
Topic: Simple queues is consuming CPU too much, how to lower it?
Replies: 2
Views: 901

Simple queues is consuming CPU too much, how to lower it?

Just a few SQ rules causes noticeable CPU consumption. Is it possible in some way to lower this consumption? Or what to use instead. I could use Queue tree - but in that way I lost possibility to see graphs of individual SQ rules...
by rado3105
Sat Aug 13, 2016 5:48 pm
Forum: General
Topic: block Windows 10 update-delivery-optimization
Replies: 20
Views: 9087

Re: block Windows 10 update-delivery-optimization

If I use simple queue to limit max individual user downloads...what queue type would be ideal to prevent full upload of services like BITS and Microsoft unwanted traffic consumption?
by rado3105
Sat Aug 13, 2016 4:32 pm
Forum: General
Topic: block Windows 10 update-delivery-optimization
Replies: 20
Views: 9087

Re: block Windows 10 update-delivery-optimization

Microsoft makes use of own protocol named BITS, that is based on HTTP. The whole traffic is encrypted (SSL/TLS) and used ports vary a lot. Summary: it works like torrent and thus is impossible to be detected by firewall and blocked/limited. Is any way to find out what is microsoft gathering about u...
by rado3105
Sat Aug 13, 2016 2:52 pm
Forum: General
Topic: block Windows 10 update-delivery-optimization
Replies: 20
Views: 9087

Re: block Windows 10 update-delivery-optimization

Of course the fact that a client uses full upload on their connection does not necessarily mean it is due to this feature. It can also mean their PC has been hacked (trojan software installed) and is being used in DDoS attacks etc. Reading the FAQ document above it is easy to turn this feature off,...
by rado3105
Sat Aug 13, 2016 1:10 pm
Forum: General
Topic: block Windows 10 update-delivery-optimization
Replies: 20
Views: 9087

Re: block Windows 10 update-delivery-optimization

We starting to have problems with clients complaining about slow opening web pages etc. And when I look at their traffic history almost full upload to internet.
Nobody has this problems?
by rado3105
Sat May 21, 2016 9:23 am
Forum: General
Topic: Feature request: Check IP range before dynamic add to address list....
Replies: 5
Views: 1275

Re: Feature request: Check IP range before dynamic add to address list....

Thanks a lot for great explanation. But what if ip is in address list with different name? I example: src-address-list=!THELIST action=add-src-to-address-list address-list=THELIST - but ip will be in thelist1 and I dont want to add any ip present in address list named by different name... is possibl...
by rado3105
Fri May 20, 2016 1:26 pm
Forum: General
Topic: Feature request: Check IP range before dynamic add to address list....
Replies: 5
Views: 1275

Re: Feature request: Check IP range before dynamic add to address list....

On the rule that adds things to an address list, just add this: src-address-list=!myAddressList (assuming you're checking/adding the source address) If there is ip range in address list e.g. 192.168.0.0/24 and that rule with src-address-list=!myAddressList wants to add ip address 192.168.0.5. What ...
by rado3105
Fri May 20, 2016 12:55 am
Forum: General
Topic: Feature request: Check IP range before dynamic add to address list....
Replies: 5
Views: 1275

Feature request: Check IP range before dynamic add to address list....

I have some ranges in address list with static ip addresses. But some get there dynamicaly (content mark...and so on...). But ip gets inside address list also when the whole range of ip that belong to is there. Is possible to add just ip addresses that are not in address list and also in ip range, t...
by rado3105
Fri May 20, 2016 12:52 am
Forum: General
Topic: Cant connect from windows dude to server, v6.35.1
Replies: 3
Views: 1282

Re: Cant connect from windows dude to server, v6.35.1

sob you are right, it wasnt enabled....
by rado3105
Wed May 18, 2016 10:36 pm
Forum: General
Topic: Support for Intel pro 1000/pt dual port ethernet
Replies: 0
Views: 1011

Support for Intel pro 1000/pt dual port ethernet

This card tested in RouterOS 6.35. System identify this card, but it disconnects every few second.
Is that supported? or why not?
by rado3105
Tue May 17, 2016 10:04 am
Forum: General
Topic: SSH communication in MIkrotik, how to generate RSA key
Replies: 4
Views: 2106

SSH communication in MIkrotik, how to generate RSA key

Is possible to generate RSA key in RouterOS?
Is possible to comunicate using this RSA key with SSH between 2 mikrotiks?
by rado3105
Sat Apr 30, 2016 6:25 pm
Forum: General
Topic: Cant connect from windows dude to server, v6.35.1
Replies: 3
Views: 1282

Cant connect from windows dude to server, v6.35.1

On x86 with rotueros installation I installed dude server v6.35.1. The same I installed as client exe on windows 7. I am connecting to ip address of server dude, changed login and I cant connect. I use default port 2210. Why? Is any way to change server settings without connecting to it using client?
by rado3105
Wed Apr 27, 2016 12:06 am
Forum: Wireless Networking
Topic: 5.4GHz band in czech regulatory domain
Replies: 11
Views: 4535

Re: 5.4GHz band in czech regulatory domain

Any news? Same problem in Slovakia
by rado3105
Sat Apr 16, 2016 8:05 pm
Forum: General
Topic: x86/64 Jetaway jnc9t-1037 in v6 problems, not in v5
Replies: 2
Views: 685

Re: x86/64 Jetaway jnc9t-1037 in v6 problems, not in v5

I added pci-e dual ethernet card and use this two ethernets instead of integrated and it works now in v6 like a charm.
Ethernet card: Intel EXPI9402PT NC360T - 2x ethernet, pcie-e 1x
by rado3105
Tue Mar 29, 2016 7:10 pm
Forum: RouterBOARD hardware
Topic: rb44ge is ok to use it in pci-E 1x,
Replies: 12
Views: 1749

Re: rb44ge is ok to use it in pci-E 1x,

In comparison with integrated realteks I have worse latency, can be that because of this pcie?
by rado3105
Sun Mar 27, 2016 9:30 am
Forum: RouterBOARD hardware
Topic: rb44ge is ok to use it in pci-E 1x,
Replies: 12
Views: 1749

Re: rb44ge is ok to use it in pci-E 1x,

according to that, it should be ok...
by rado3105
Sun Mar 27, 2016 1:19 am
Forum: RouterBOARD hardware
Topic: rb44ge is ok to use it in pci-E 1x,
Replies: 12
Views: 1749

Re: rb44ge is ok to use it in pci-E 1x,

I fitted 4x card in 1x slot...just cut the end of the pcie....
by rado3105
Sat Mar 26, 2016 11:55 pm
Forum: RouterBOARD hardware
Topic: rb44ge is ok to use it in pci-E 1x,
Replies: 12
Views: 1749

rb44ge is ok to use it in pci-E 1x,

Today I starte to use rb44ge 4x pcie ethernet card in jnc9t with PCIE 1x. I am using just 2 ports, another 2 ports I disabled. Should I expect any problems? thanks
by rado3105
Fri Mar 25, 2016 12:54 pm
Forum: General
Topic: x86/64 Jetaway jnc9t-1037 in v6 problems, not in v5
Replies: 2
Views: 685

Re: x86/64 Jetaway jnc9t-1037 in v6 problems, not in v5

After freezing one integrated ethernet I get inside using the second one ethernet and there were tx/rx drops on ethernet:
25Mar2016_11-37-40.jpg
by rado3105
Fri Mar 25, 2016 11:01 am
Forum: RouterBOARD hardware
Topic: Mikrotik x86 Support RTL8111G ?
Replies: 3
Views: 1537

Re: Mikrotik x86 Support RTL8111G ?

Does anybody use this ethernet? I have problems with them under v6, but this problems was not present in v5.
RTL8111G
by rado3105
Fri Mar 25, 2016 10:48 am
Forum: General
Topic: x86/64 Jetaway jnc9t-1037 in v6 problems, not in v5
Replies: 2
Views: 685

x86/64 Jetaway jnc9t-1037 in v6 problems, not in v5

This board Jetaway jnc9t-1037 I had for 2 years with firmware v5, without problem. http://www.jetwaycomputer.com/NC9T.html After upgrade to v6 - the board freezes, seems problem with integrated ethernets. I also tryed upgrad to 6.34, 6.35 without succes. Also tryed Trafficflow auto on both ethernets...
by rado3105
Mon Mar 14, 2016 3:55 pm
Forum: General
Topic: Background scan dont work correctly
Replies: 1
Views: 893

Background scan dont work correctly

When you push scan button and have checked background it shows option not supported....please repair it....
by rado3105
Tue Jan 05, 2016 12:51 am
Forum: RouterBOARD hardware
Topic: Alternative to Litebeam AC 23 mimo for 60USD from Mikrotik?
Replies: 5
Views: 1352

Re: Alternative to Litebeam AC 23 mimo for 60USD from Mikrotik?

it is not intended to use it in harsh locations...
by rado3105
Mon Jan 04, 2016 9:57 pm
Forum: RouterBOARD hardware
Topic: Alternative to Litebeam AC 23 mimo for 60USD from Mikrotik?
Replies: 5
Views: 1352

Alternative to Litebeam AC 23 mimo for 60USD from Mikrotik?

Do you plan any alternative? because this is winner of price/power ratio....in AC segment...
by rado3105
Sun Jan 03, 2016 1:04 pm
Forum: General
Topic: Feauture request: Airview like spectrum analyzer with second wireless chip
Replies: 2
Views: 1838

Feauture request: Airview like spectrum analyzer with second wireless chip

Airview like spectrum analyzer with second wireless chip - this is the future of 5GHz...and inclusion of this in routerboards and routeros can make Mikrotik wireless competitive...without that you lost in future...
by rado3105
Sun Jan 03, 2016 12:59 pm
Forum: Wireless Networking
Topic: NetMetal 5 bandwidth-test
Replies: 37
Views: 16154

Re: NetMetal 5 bandwidth-test

I just have tested Rocket AC ptp-lite vs. netmetal5 - same antennas, same position on tower..same testing procedure.. Rocket AC ptp-lite is 15-20% faster than Netmetal 5. In favor of Rocket AC and all ubiquity new AC gear is second wireless chip which scans enviroment all the time, without interrupt...
by rado3105
Wed Dec 09, 2015 7:58 pm
Forum: General
Topic: Mikrotik temperature template
Replies: 6
Views: 2376

Re: Mikrotik temperature template

Looking for cacti, but could try mrtg, what soft you are using for mrtg?
by rado3105
Wed Dec 09, 2015 7:55 pm
Forum: General
Topic: How to Block torrent 100%? Only 2 lines. It is solved.
Replies: 63
Views: 94032

Re: How to Block torrent 100%? Only 2 lines. It is solved.

Is anyway to use this rules to mark ongoing p2p traffic? thanks
by rado3105
Tue Dec 08, 2015 11:13 am
Forum: General
Topic: Mikrotik temperature template
Replies: 6
Views: 2376

Re: Mikrotik temperature template

Does anybody have template for temperature, voltage, consumption for rb1100ahx2?
by rado3105
Mon Nov 30, 2015 11:15 pm
Forum: General
Topic: How to check automatically working e-mail connection?
Replies: 0
Views: 281

How to check automatically working e-mail connection?

In last versions before 6.30 it was possible to check last status of e-mail using /tool e-mail print...but in 6.30 it is gone....


how is this possible to test in new versions of routeros? thanks
by rado3105
Mon Nov 30, 2015 10:13 pm
Forum: RouterBOARD hardware
Topic: MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz?
Replies: 16
Views: 2752

Re: MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz?

Zorro can you post some boards with that brasswel? I can find any, thanks
by rado3105
Sun Nov 22, 2015 11:41 am
Forum: General
Topic: Feature Request: Suricata
Replies: 20
Views: 7011

Re: Feature Request: Suricata

Better indicator of noise. Noise indicator in status of wireless has no meaning if it does not take in account interference. (ubiquity has great indicator: interference+noise)

Also if it is very noise enviroment, routeros shows noise -113, but this is not real predictor....
by rado3105
Sat Nov 21, 2015 5:10 pm
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 51001

Re: RB3011 Block diagram?

if you notice there are ethernet protections in photo of pcb, that can be replaced with new one...
this is great idea...
by rado3105
Fri Nov 20, 2015 6:09 pm
Forum: General
Topic: 6.33.1 version is released!
Replies: 48
Views: 12666

Re: 6.33.1 version is released!

*) fastpath - fixed wireless interface fastpath (broken in 6.33);


What was the result of this in 6.33?
by rado3105
Wed Nov 18, 2015 10:53 pm
Forum: General
Topic: Feature Request: Suricata
Replies: 20
Views: 7011

Re: Feature Request: Suricata

EdgeRouter from Ubiquity becoming very interesting routing platform
https://community.ubnt.com/t5/EdgeMAX-B ... d-id/12377

- it can do DPI and use outputs for routing, QOS....also detects torrents....
by rado3105
Tue Nov 17, 2015 4:40 pm
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 51001

Re: RB3011 Block diagram?

Hope it will be released soon....
by rado3105
Tue Nov 17, 2015 11:23 am
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 51001

Re: RB3011 Block diagram?

I am waiting for something powerfull like this: https://www.indiegogo.com/projects/turr ... rce-router#/ from mikrotik
by rado3105
Sat Nov 14, 2015 2:17 pm
Forum: General
Topic: Collect data in frequency usage tool
Replies: 0
Views: 999

Collect data in frequency usage tool

UBNT has great tool airview, which scans the enviroment and collects noise...not just for second, but all the time. It could be great if you guys have add possibilities to collect all data on all channels during freq. scanner tool. Because like it is now, it has no meaning...
by rado3105
Wed Nov 04, 2015 9:35 am
Forum: RouterBOARD hardware
Topic: MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz?
Replies: 16
Views: 2752

Re: MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz?

I have no problem with my x86 system, just planning to upgrade it...


This mb has 50w power consumption: http://www.aliexpress.com/store/product ... 69834.html
is that possible?
by rado3105
Sun Nov 01, 2015 3:31 pm
Forum: RouterBOARD hardware
Topic: MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz?
Replies: 16
Views: 2752

Re: MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz?

I use now this one: Jetaway JNC9T-1037 power consumption max. 15W (with transcend ssd 512MB module), meanwell power supply, no casing needed, dual ethernet intel pci express card (from ebay for 40Eur). So full price aroung 200Eur. Works like a charm for one year. But it will need replacement for som...
by rado3105
Fri Oct 30, 2015 7:27 pm
Forum: RouterBOARD hardware
Topic: MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz?
Replies: 16
Views: 2752

MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz?

MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz? ideal low power consumption, 12-24V power supply... /like jetaway boards/
by rado3105
Fri Oct 30, 2015 7:20 pm
Forum: Forwarding Protocols
Topic: Eoip link 40% lower throughoutput than link without EOIP, in TCP
Replies: 7
Views: 1819

Re: Eoip link 40% lower throughoutput than link without EOIP, in TCP

I am using GRE tunnels, works great, simple....also MTU size ideal for all routerboards...
by rado3105
Sat Oct 17, 2015 9:46 am
Forum: Forwarding Protocols
Topic: 2x higher latency in GRE tunnel
Replies: 1
Views: 919

2x higher latency in GRE tunnel

Is that possible to be 2x higher latency in gre tunnel (plain gre, without encryption) than on direct link?
by rado3105
Sat Oct 17, 2015 1:20 am
Forum: Forwarding Protocols
Topic: What is ideal MTU for gre tunnel
Replies: 3
Views: 1758

Re: What is ideal MTU for gre tunnel

it is set to 1500, rx, tx drops: 0
by rado3105
Fri Oct 16, 2015 11:25 pm
Forum: Forwarding Protocols
Topic: What is ideal MTU for gre tunnel
Replies: 3
Views: 1758

What is ideal MTU for gre tunnel

Using interface/gre I created unsecured tunnel (point to point). I would like to ask, if it is any recommended MTU to be set? or it is just good to leave it default?
by rado3105
Thu Oct 15, 2015 8:05 pm
Forum: Forwarding Protocols
Topic: OpenVPN as alternative to EOIP
Replies: 1
Views: 963

OpenVPN as alternative to EOIP

Is that possible? I need to transfer all the traffic, also udp.
I read here http://wiki.mikrotik.com/wiki/OpenVPN that UDP is not supported. Is that actual?
by rado3105
Thu Oct 15, 2015 7:27 pm
Forum: Forwarding Protocols
Topic: Eoip link 40% lower throughoutput than link without EOIP, in TCP
Replies: 7
Views: 1819

Eoip link 40% lower throughoutput than link without EOIP, in TCP

I have one wireless link, I tryed to make eoip tunnel over it. Without tunnel it has throughoutput 70mbit/s. Over tunnel EOIP it has throughoutput in TCP just 38Mbit/s. in UDP throughotput is same with or without tunnel. MTU is everywhere set on 1542. I tryed it on various wireless links, so it has ...
by rado3105
Wed Oct 14, 2015 11:44 pm
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 51001

Re: RB3011 Block diagram?

Is there arm processor?
When it will be released?
by rado3105
Wed Oct 07, 2015 10:45 pm
Forum: General
Topic: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS
Replies: 76
Views: 29080

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS

I see this errors in rb2011 where is connected rocket ac lite ptt, 1gbit/s full duplex.
Many rx fcs errors.
Does anybody have this problem?
I enabled rx/tx flowcontrol....
by rado3105
Wed Oct 07, 2015 6:55 pm
Forum: General
Topic: Mikrotiks and MTU, needed on every Mikrotik? or just on start and end of tunnel?
Replies: 2
Views: 319

Re: Mikrotiks and MTU, needed on every Mikrotik? or just on start and end of tunnel?

Is better to set max. MTU on all interfaces on the path? or is better to set exact for EOIP.
What about interfaces with fastpath, is that also there needed?
by rado3105
Wed Oct 07, 2015 3:56 pm
Forum: General
Topic: Mikrotiks and MTU, needed on every Mikrotik? or just on start and end of tunnel?
Replies: 2
Views: 319

Mikrotiks and MTU, needed on every Mikrotik? or just on start and end of tunnel?

I have eoip tunnel between mk1-----mk6. But changed mtu to 1546 only in mk1 and mk6...not in mk2,mk3,mk4,mk5

is that needed to work tunnel correctly without fragmentation to change MTU in all mikrotiks in the way? (mk2,mk3,mk4,mk5)?
thanks
by rado3105
Tue Sep 22, 2015 12:32 am
Forum: Wireless Networking
Topic: NetMetal 5 bandwidth-test
Replies: 37
Views: 16154

Re: NetMetal 5 bandwidth-test

what is maximum one way throughoutput (tcp) you get from netmetal in N or AC (only 20mhz channel size)?
by rado3105
Thu Aug 06, 2015 1:38 am
Forum: RouterBOARD hardware
Topic: Mikrotik DynaDish 5
Replies: 85
Views: 30796

Re: Mikrotik DynaDish 5

https://www.ubnt.com/airmax/litebeam-m5/
you could make something like this. Great price - 50 Eur, great power.very lightweight..but if it was MIMO it would be killer product...so Mikrotik make that killer product....
by rado3105
Sat Jul 18, 2015 11:32 pm
Forum: RouterBOARD hardware
Topic: r11e-5hnd freezes mainly in high temperatures outside
Replies: 0
Views: 428

r11e-5hnd freezes mainly in high temperatures outside

It stops to transmitt and during scan doesnt find any network. The only solution is restart of routerboard.
Does anybody have problem with this wireless cards? It is in rb912 and I also changed it for new AC one model....
by rado3105
Sat Jul 04, 2015 5:33 pm
Forum: Announcements
Topic: FastTrack - New feature in 6.29
Replies: 237
Views: 140047

Re: FastTrack - New feature in 6.29

I have one router that has no rules in firewall filter. But limits one network using SQ, but also the traffic except that network goes through router. I am thinking to make rule that will fasttrack all connections except that one network that uses SQ. Is it good idea? Will it lower CPU usage or not?...
by rado3105
Wed Jul 01, 2015 2:20 pm
Forum: General
Topic: Many IPs in SQ and cant see full windows, cant change speed limitation
Replies: 1
Views: 655

Many IPs in SQ and cant see full windows, cant change speed limitation

If I want to put just some IPs of /26 IP range it cant be seen in winbox, but what it worse, I cant see SQ speed limitation, cant change it. Why is it not possible to use range in SQ, like: 192.168.1.2-192.160.1.10..

Can it be solved, or do you plan it?
by rado3105
Fri Jun 26, 2015 12:52 am
Forum: RouterBOARD hardware
Topic: hEX lite (RB750r2)
Replies: 12
Views: 14932

Re:

I don't think so.
what I was comparing tests on routerboard.com rb2011 is in many ways at least 2x more powerfull than rb750r2
by rado3105
Mon Jun 22, 2015 4:37 pm
Forum: RouterBOARD hardware
Topic: hEX lite (RB750r2)
Replies: 12
Views: 14932

Re: hEX lite (RB750r2)

is CPU more powerfull than in rb2011?
by rado3105
Mon Jun 15, 2015 12:45 am
Forum: RouterBOARD hardware
Topic: Mikrotik DynaDish 5
Replies: 85
Views: 30796

Re: Mikrotik DynaDish 5

what is the weight?
is it 23 od 25dBi?

what has better antenna for ptp links? qrt5ac or dynadish ac?
by rado3105
Tue May 26, 2015 10:16 am
Forum: General
Topic: Uzbekistan and 5720 channel not on some devices and yes on other, why?
Replies: 2
Views: 356

Uzbekistan and 5720 channel not on some devices and yes on other, why?

Hi, on ap (rb912, ros 6.19) i have channel 5720 in uzbekistan. But on some clients (various sextants) it is not under Uzbekistan. But on some rb911 it is. Why?
by rado3105
Sun May 24, 2015 9:43 pm
Forum: General
Topic: What is order of processing mangle?
Replies: 4
Views: 584

Re: What is order of processing mangle?

The rules are 1,2,3..for example from up to down in mangle
What I am asking is if they are processed from up to down, like 1>2>3 or not?
by rado3105
Thu May 21, 2015 1:31 am
Forum: General
Topic: What is order of processing mangle?
Replies: 4
Views: 584

What is order of processing mangle?

I have 2 rules in mangle:
one that sends 2 ports of same ip over first wan and second mangle rule which sends all ports over second wan.
But the rule with two ports dont work, independent of that: the rule with 2 ports is on first place in mangle list. Why?
by rado3105
Mon May 04, 2015 5:49 pm
Forum: RouterBOARD hardware
Topic: Mikrotik DynaDish 5
Replies: 85
Views: 30796

Re: Mikrotik DynaDish 5

There is only client version? no AP?
by rado3105
Mon May 04, 2015 5:46 pm
Forum: Wireless Networking
Topic: 802.11ac on 40mhz spectrum, will it give better result?
Replies: 32
Views: 4696

Re: 802.11ac on 40mhz spectrum, will it give better result?

In my case also. I tryed ac devices (Mikrotik) and compared them to N, using TCP tests, but N was better than AC. So we dont plan to use Mikrotik AC devices in near future. What I heard from folks in ISP business Ubnt has much better AC devices (at least 1/2 faster than Mikrotik), so maybe we try UB...
by rado3105
Mon May 04, 2015 5:33 pm
Forum: Wireless Networking
Topic: nv2 multilink problem
Replies: 94
Views: 27405

Re: nv2 multilink problem

Still having issues on this with V6.27 I have links that used to run at 75 meg not barely getting 30. But on UDP i can test at 100. Is their any way to fine tune NV2 as i can not find anything.
Try another firmware, lik 6.19 and also with wirelles-fp enabled..and give us know....
by rado3105
Mon May 04, 2015 5:30 pm
Forum: Wireless Networking
Topic: 17GHz which is the best ?
Replies: 11
Views: 1862

Re: 17GHz which is the best ?

siae has 20dB tx power, Racom just 5dB. This can be very useful for long links in case of bad weather to use ATPC...

For distance max. 4km is Racom by far the best wireless link in 17,24ghz spectrum...
by rado3105
Mon Apr 27, 2015 12:41 am
Forum: Wireless Networking
Topic: 17GHz which is the best ?
Replies: 11
Views: 1862

Re: 17GHz which is the best ?

I recommend:
http://www.racom.eu/eng/products/microwave-link.html
(you can buy one link for 17ghz, 360mbit/s, lattency <1ms around 4000Eur with VAT, also with antennas) - but this link maximal for 4km

http://www.pojitko.cz/platforma

SIAE
by rado3105
Sun Apr 26, 2015 11:55 pm
Forum: Announcements
Topic: hAP lite
Replies: 389
Views: 164151

Re: hAP lite

One rb941 do pppoe, routing, 4 queue tree rules, 3 nat rules and 20mbit/s traffic and cpu runs max. at 10%.
by rado3105
Fri Apr 17, 2015 12:21 pm
Forum: General
Topic: v6.28 will be released this week!
Replies: 72
Views: 19016

Re: v6.28 will be released this week!

I am trying latest rc version and FASTPATH status shows in rb2011 that fastpath is off. Despite that is enabled in ip settings and all conditions for fastpath are met (disabled connections tracking, queues, mangle..).
What is problem?
16Apr2015_23-43-59.jpg
by rado3105
Tue Apr 14, 2015 1:28 pm
Forum: General
Topic: rb433ah freezing using dual nstreme A
Replies: 7
Views: 1163

Re: rb433ah freezing using dual nstreme A

Now I confront with new problem:
Nstreme on 802.11a, on one site rb600, ros v6.27. Disconnects, almost every 2hours, despite great signal, SNR, minimal noise....after changing to nv2 problems dissapears, but lattency is high...


can anybody help?
by rado3105
Wed Apr 08, 2015 10:29 pm
Forum: General
Topic: rb2011 100% CPU
Replies: 2
Views: 833

rb2011 100% CPU

I just accidentally notice it, when client complain about speed....ros v6.20
08Apr2015_20-59-44.jpg
by rado3105
Mon Apr 06, 2015 1:04 am
Forum: General
Topic: Fastpath and EOIP on rb2011
Replies: 0
Views: 400

Fastpath and EOIP on rb2011

What if I create tunnel EOIP on device that runs fastpath. Is it possible to run fastpath when EOIP tunnel is created?
by rado3105
Mon Apr 06, 2015 1:03 am
Forum: Announcements
Topic: hAP lite
Replies: 389
Views: 164151

Re: hAP lite

mikrotik please introduce some sxt like product with smips 5ghz and dual chain
limit features just to basic cpe

at approx $35 price that will make life of wisp easier
thanks
Yes this would be ubnt killer. And now 941 is mainly tplink killer!!!
by rado3105
Mon Apr 06, 2015 1:02 am
Forum: General
Topic: Problem with ht-txchain 1
Replies: 12
Views: 4371

Re: Problem with ht-txchain 1

Is enought to connect to not used port only pigtail? to prevent damage power amp? or it must be antenna?
by rado3105
Fri Apr 03, 2015 7:11 pm
Forum: Announcements
Topic: hAP lite
Replies: 389
Views: 164151

Re: hAP lite

What is maximum voltage, that can be put in hAP?
by rado3105
Tue Mar 31, 2015 10:55 pm
Forum: RouterBOARD hardware
Topic: rb3011 based on ARM CPU
Replies: 57
Views: 28431

Re: rb3011 based on ARM CPU

ARM cpus are the future, have very fast development, power growth per year. They are made in quantities, so the price of made is low....
by rado3105
Tue Mar 31, 2015 12:03 am
Forum: Wireless Networking
Topic: 2 devices in scan with signals: -19, -24, and very bad throughoutput
Replies: 2
Views: 450

Re: 2 devices in scan with signals: -19, -24, and very bad throughoutput

The antennas are in the fron of my antenna, there is no way to communicate with competition ...and the clients of me are behind competitors antenas...
by rado3105
Mon Mar 30, 2015 11:02 pm
Forum: Wireless Networking
Topic: 2 devices in scan with signals: -19, -24, and very bad throughoutput
Replies: 2
Views: 450

2 devices in scan with signals: -19, -24, and very bad throughoutput

The frequencies are 100mhz outside of those devices, but still I have problem to get good throughoutput problem is mainly with receive.
Why, what is the problem? Changing channels doesnt helps...
Is any way to solve it?
by rado3105
Sun Mar 29, 2015 8:16 pm
Forum: RouterBOARD hardware
Topic: rb3011 based on ARM CPU
Replies: 57
Views: 28431

rb3011 based on ARM CPU

This seems first time Mikrotik uses ARM cpu, will be packages for other boards based on ARM cpu? (like x86 package). And other interesting thing is Power, it is written that it is 2x more powerfull than rb2011, but this is too little for that specs (dualcore cpu, 2 times higher frequency than rb2011...
by rado3105
Sun Mar 29, 2015 6:54 pm
Forum: Wireless Networking
Topic: Mimosa and first PtM with MU-MIMO
Replies: 19
Views: 4324

Re: Mimosa and first PtM with MU-MIMO

Why, it is inspiration for MT to make devices better....and also on ubnt forum there are topics and it is not censored. So It could be great to post screens. What throughoutput you can get on 40mhz channel, what is distance, noise...thanks...
by rado3105
Sat Mar 28, 2015 6:26 pm
Forum: Announcements
Topic: hAP lite
Replies: 389
Views: 164151

Re: hAP lite

What about throughoutput comparison with rb2011 (if used only 100Mbit/s ports)?
by rado3105
Sat Mar 28, 2015 6:24 pm
Forum: Wireless Networking
Topic: Mimosa and first PtM with MU-MIMO
Replies: 19
Views: 4324

Re: Mimosa and first PtM with MU-MIMO

Did anybody tested mimosa b5?
by rado3105
Sat Mar 21, 2015 5:32 pm
Forum: General
Topic: Prioritize VoIP - post your ideas
Replies: 26
Views: 20445

Re: Prioritize VoIP - post your ideas

I have problem with skype video, is any way how to prioritize it?
by rado3105
Sat Mar 21, 2015 5:30 pm
Forum: Wireless Networking
Topic: Mimosa and first PtM with MU-MIMO
Replies: 19
Views: 4324

Mimosa and first PtM with MU-MIMO

http://mimosa.co/home/Products/Access-Point/A5-90.html

Inspiration for Mikrotik? MU-MIMO is future and place for us to be able to compete with Big Providers (DSL, optics...)
by rado3105
Mon Feb 23, 2015 3:39 pm
Forum: Wireless Networking
Topic: Ubiquity airfiber 5x
Replies: 16
Views: 6590

Re: Ubiquity airfiber 5x

MT had great superior DUAL Nstreme (many many years old technology, that could compete also in these times.....)...it is shame that they didnt tune it for many years....
by rado3105
Mon Feb 23, 2015 3:36 pm
Forum: General
Topic: mikrotik tcp connection limit reject or drop
Replies: 11
Views: 5925

Re: mikrotik tcp connection limit reject or drop

I am not sure, but seemed like DDOS...
by rado3105
Sat Feb 14, 2015 8:16 pm
Forum: General
Topic: mikrotik tcp connection limit reject or drop
Replies: 11
Views: 5925

Re: mikrotik tcp connection limit reject or drop

under attack tarpit made my router unresponsive and internet went down....for local users, not for attacker....
by rado3105
Sun Feb 08, 2015 6:44 pm
Forum: Scripting
Topic: How to ***really*** block invalid TCP and UDP packet
Replies: 43
Views: 36258

Re: How to ***really*** block invalid TCP and UDP packet

Is it not better to use reject instead of drop?
by rado3105
Sun Feb 08, 2015 1:09 pm
Forum: Wireless Networking
Topic: Ubiquity airfiber 5x
Replies: 16
Views: 6590

Re: Ubiquity airfiber 5x

No this post was not meant to leave Mikrotik wireless...but to be better in wirelless...we need mikrotik and we prefere ptm devices Mikrotik with NV2 over UBNT (they are much cheaper, backward compatible, better throughoutput, minimal faultiness in comparison with UBNT)
by rado3105
Sun Feb 08, 2015 12:18 pm
Forum: General
Topic: mikrotik tcp connection limit reject or drop
Replies: 11
Views: 5925

Re: mikrotik tcp connection limit reject or drop

According to some texts it is better to use reject instead of drop in case of failure....because DROP could kill your router....and make it unreachable
by rado3105
Sun Feb 08, 2015 12:15 pm
Forum: General
Topic: SYN FLOOD PROTECT killed my network
Replies: 1
Views: 1021

Re: SYN FLOOD PROTECT killed my network

Here is written that there is better way not tu use DORP, but only reject in Firewall. What you think about that?
http://www.chiark.greenend.org.uk/~pete ... -vs-reject
by rado3105
Sun Feb 08, 2015 1:48 am
Forum: General
Topic: SYN FLOOD PROTECT killed my network
Replies: 1
Views: 1021

SYN FLOOD PROTECT killed my network

Internet stopped to work, or very slow. Latency went from 5ms to 1000ms. Many times not possible to get into winbox. CPU was not 100%. I have this rule as prevention against syn flood: /ip firewall filter add chain=forward protocol=tcp tcp-flags=syn connection-state=new \ action=jump jump-target=SYN...
by rado3105
Fri Feb 06, 2015 10:32 am
Forum: Wireless Networking
Topic: Ubiquity airfiber 5x
Replies: 16
Views: 6590

Re: Ubiquity airfiber 5x

airFiber 5X Uses Dual Polarized Slant 45 antennas, or you can upgrade a Rocket™link that uses a RocketDish™ RD‑5G30/RD‑5G34* antenna. A dipole, which is set at a slant of +45° when viewed from the front, will appear to be vertically polarized when viewed from the side and will then appear at a slant...
by rado3105
Thu Feb 05, 2015 11:42 am
Forum: Wireless Networking
Topic: Ubiquity airfiber 5x
Replies: 16
Views: 6590

Ubiquity airfiber 5x

What will be your response Mikrotik?
http://www.ubnt.com/airfiber/airfiber5x/
by rado3105
Fri Jan 16, 2015 8:33 pm
Forum: General
Topic: v6.24 worse throughoutput only on older Routerboards
Replies: 6
Views: 901

Re: v6.24 worse throughoutput only on older Routerboards

also the same for 802.11n on rb433ah, throughoutput lower by half than in 6.19
by rado3105
Fri Jan 16, 2015 6:31 pm
Forum: General
Topic: v6.24 worse throughoutput only on older Routerboards
Replies: 6
Views: 901

Re: v6.24 worse throughoutput only on older Routerboards

I am using wireless-fp....wireless....on 6.19 without problem....and I forgot it is 802.11a...
by rado3105
Fri Jan 16, 2015 9:34 am
Forum: General
Topic: v6.24 worse throughoutput only on older Routerboards
Replies: 6
Views: 901

v6.24 worse throughoutput only on older Routerboards

After upgrading older routerboards (rb711, rb433ah) from v6.19...to v 6.24 throughoutput dropped by half. But this happened only on older routerboards. Why?
by rado3105
Sat Jan 10, 2015 12:34 am
Forum: General
Topic: MU-MIMO do you plan it Mikrotik?
Replies: 10
Views: 3858

MU-MIMO do you plan it Mikrotik?

Do you plan to use MU-MIMO technology in your gear?
by rado3105
Fri Jan 02, 2015 3:32 pm
Forum: General
Topic: open source management and billing system
Replies: 0
Views: 1329

open source management and billing system

Does anybody know some opensource system for billing and managment. I found: 1: lms (lan management system) - pretty outdated, not good documented and with complicated installation 2. FreenetIS - good documented, easy installation, good cooperation with developers (they program for you what you want...
by rado3105
Fri Jan 02, 2015 12:58 pm
Forum: General
Topic: TCP performance
Replies: 74
Views: 26326

Re: TCP performance

- another point, after ros 6.19 bandwitch test for tcp is completely not working correctly, it shows bad throughoutput and mostly sinusoid type TCP Test has never been working correctly. The CPU-load goes to 100% and is limiting the bandwidth. Often the link ist not the limit. For TCP-Tests I put R...
by rado3105
Wed Dec 31, 2014 9:36 pm
Forum: General
Topic: TCP performance
Replies: 74
Views: 26326

Re: TCP performance

older versions than 6.19 had problems with 1gbit ports connected to 100mbit/s...it has to be manually selected 100mbit/s in eth. interface, new version seems to solve it...so this was bug of RouterOS - another point, after ros 6.19 bandwitch test for tcp is completely not working correctly, it shows...
by rado3105
Wed Dec 31, 2014 9:29 pm
Forum: General
Topic: Celeron 1037 2x times faster than atom 525 in ros 5.26
Replies: 6
Views: 1427

Re: Celeron 1037 2x times faster than atom 525 in ros 5.26

you said clearly in title that is a comparison.
Read in your link what hardware was used.
I am telling you again: celeron is not quadcore but dualcore, and not 2ghz but 1,8ghz...so read at first and then comment...
by rado3105
Tue Dec 23, 2014 11:00 pm
Forum: Wireless Networking
Topic: BaseBox5/NetBox5 RF shield
Replies: 7
Views: 2096

Re: BaseBox5/NetBox5 RF shield

Rf elements have a good aluminium box that fit onto airmax sectors. Inside you can put a RB7xx or RB91x. It's calles station box S
it is plastic....
by rado3105
Fri Dec 19, 2014 3:35 pm
Forum: General
Topic: Celeron 1037 2x times faster than atom 525 in ros 5.26
Replies: 6
Views: 1427

Re: Celeron 1037 2x times faster than atom 525

Comparison is made between a dual core Atom at 1.8Ghz and quad core Celeron at 2Ghz.
I can say for sure that an Lamborghini is faster than a truck.
no it is celeron 1,8ghz dual core....
and this was published here for users to see that routeros 5.26 works on this board without problem...
by rado3105
Fri Dec 19, 2014 2:04 pm
Forum: General
Topic: Celeron 1037 2x times faster than atom 525 in ros 5.26
Replies: 6
Views: 1427

Celeron 1037 2x times faster than atom 525 in ros 5.26

Here is comparison in real situation in routeros 5.26.
http://lokalnyisp.net/viewtopic.php?f=4 ... dbe19#p601

these two motherboards:
Jetaway nf-96u-525 (Intel Atom) vs Jetaway JNC9T-1037 (intel celeron dual core 1,8ghz).
by rado3105
Thu Dec 18, 2014 10:53 pm
Forum: General
Topic: Is possible to test tcp using routerOS, not Bandwitchtest...
Replies: 0
Views: 423

Is possible to test tcp using routerOS, not Bandwitchtest...

Bandwitch test doesnt work....
Traffic generator seems not to work with tcp...
How to test tcp?
by rado3105
Thu Dec 11, 2014 12:25 am
Forum: RouterBOARD hardware
Topic: RouterBOARD testing procedures
Replies: 33
Views: 27165

Re: RouterBOARD testing procedures

Could anybody make example for 2 routerboards connected wireless? normis?
by rado3105
Thu Dec 11, 2014 12:17 am
Forum: General
Topic: Confused about traffic generator results
Replies: 3
Views: 1352

Re: Confused about traffic generator results

Can anybody answer?
by rado3105
Wed Dec 10, 2014 3:38 pm
Forum: General
Topic: Test 2 routers using traffic generator, is possible?
Replies: 0
Views: 383

Test 2 routers using traffic generator, is possible?

Hi, I couldnt find manual how to test bandwitch using traffic generator betwen two routers..is that possible? can anybody in short write me how? thanks
by rado3105
Tue Dec 09, 2014 9:19 pm
Forum: Announcements
Topic: 6.23 released!
Replies: 143
Views: 53897

Re: 6.23 released!

bandwitch test is not working correctly, very unstable and 2x slower than in 6.19...propably problem with optimization....
the last version where btest is working correctly je 6.19....did anybody notice it?
Mikrotik why did you mess bandwitch test?
by rado3105
Fri Nov 28, 2014 5:24 pm
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 54813

Re: 6.22 released!

contrary to v6.19 much lower wirelles throughoutput (2 times less sometimes), bad wireless stability, bandwitch test not working correctly....
by rado3105
Thu Nov 27, 2014 9:17 pm
Forum: Scripting
Topic: Api to connect to router, disable queue simple
Replies: 7
Views: 1545

Re: Api to connect to router, disable queue simple

but problem is that it cant be used in script..also telnet...can anybody help how to connect from one routeros device to another one using script?
by rado3105
Thu Nov 27, 2014 9:08 pm
Forum: General
Topic: Problems with bandwitch test in all versions after 6.19
Replies: 0
Views: 593

Problems with bandwitch test in all versions after 6.19

When I have in router routeros v6.19...throughoutput is 50Mbit/s (nv2, 2x2)...after upgrade to 6.22, or 6.20 bandwitch test shows very unstable througoutput from 17mbit/s to 30mbit/s....(20tcp, one way)...after downgrade throughoutput is stable, 50mbit/s...

Did anybody notice this?
by rado3105
Wed Nov 26, 2014 2:33 am
Forum: General
Topic: 6.22 released!
Replies: 151
Views: 54813

Re: 6.22 released!

local tx, rx limits during bandwitch test dont limit test...
by rado3105
Fri Sep 26, 2014 7:05 pm
Forum: Scripting
Topic: Auto bandwitch test and send email if throughoutput is less.
Replies: 1
Views: 1031

Auto bandwitch test and send email if throughoutput is less.

I want to make skript, which will do bandwitch test and if throughoutput will be less than X it will send me email. I have this 2 scripts, If I run it separately they run without problem. But If I run skript2 using skript1 it will start, but didnt log message. Script1: /tool bandwidth-test 10.x.x.x ...
by rado3105
Thu Sep 25, 2014 11:51 am
Forum: Scripting
Topic: Is possible to run 2 different commands at the same time?
Replies: 3
Views: 798

Re: Is possible to run 2 different commands at the same time

yes this is worse alternative....can anybody answer if it is possible in one script?
by rado3105
Wed Sep 24, 2014 11:40 pm
Forum: Scripting
Topic: Is possible to run 2 different commands at the same time?
Replies: 3
Views: 798

Is possible to run 2 different commands at the same time?

Is possible to run 2 different commands at the same time in routeros scripts?
by rado3105
Sat Sep 20, 2014 8:17 am
Forum: RouterBOARD hardware
Topic: mANT30 PA - photo inside
Replies: 9
Views: 3688

Re: mANT30 PA - photo inside

http://en.jirous.com/antenna-5ghz/jrc-29-duplex

could you make inspiration from this? extra buyable shield (withou it is useless in noisy enviroment) and also pigtails are not covered in mant, the are on direct sun and are heated...and cause losses
by rado3105
Sat Sep 20, 2014 8:13 am
Forum: General
Topic: 340mbps with bonding
Replies: 7
Views: 2899

Re: 340mbps with bonding

Does anybody have active working bonding?
sure
what kind? ospf, eoip(what mode of balancing balance-rr, xor..)? which is best for 2 wireless nv2 links
by rado3105
Sun Sep 14, 2014 10:22 pm
Forum: General
Topic: 340mbps with bonding
Replies: 7
Views: 2899

Re: 340mbps with bonding

Does anybody have active working bonding?
by rado3105
Sun Sep 14, 2014 7:16 pm
Forum: Wireless Networking
Topic: Bonding 2 wireless links throughoutput as one link
Replies: 1
Views: 968

Re: Bonding 2 wireless links throughoutput as one link

balance alb : 34mbit/s dropping to 4mbit/s, but better latency...

Now I noticed that when I do bandwitch test data goes only through one eoip tunel. Why?
by rado3105
Sun Sep 14, 2014 5:54 pm
Forum: Wireless Networking
Topic: Bonding 2 wireless links throughoutput as one link
Replies: 1
Views: 968

Bonding 2 wireless links throughoutput as one link

I am bonding two wirelless links. Each links has throughoutput 50mbit/s. They are bonded using balance-rr. When I test throughoutput of bonded link it has throughoutput less than one link throughoutput, less than 50mbit/s. I used this manual to create it: http://wiki.mikrotik.com/wiki/Bonding_Exampl...
by rado3105
Wed Sep 10, 2014 6:26 pm
Forum: General
Topic: IP cloud useless behind NAT
Replies: 29
Views: 18271

Re: IP cloud useless behind NAT

I had v6.18 installed and after changing public ip ip cloud didnt changed it. I had to come on place and do force-update manually. Why?
I upgraded to v6.19, hope it solved this problem.
by rado3105
Tue Sep 09, 2014 11:04 pm
Forum: Wireless Networking
Topic: What maximum distance for sextant to connect to 23dBi sector
Replies: 1
Views: 761

What maximum distance for sextant to connect to 23dBi sector

I connected sextant to 23dBi sektor antenna in 20 000 people town, pretty noisy. The link from client to ap goes through town. DIstance is 3km. And throghoutput from sextant to ap is 10mbit/s (1 tcp) and 40-50mbit/s down 1 tcp.
by rado3105
Mon Sep 08, 2014 12:03 am
Forum: Wireless Networking
Topic: Is wireless-fp useful for something besides CAPsMAN?
Replies: 15
Views: 4725

Re: Is wireless-fp useful for something besides CAPsMAN?

for me wireless-fp and new v6.19 gave every mk wireless device much more stability, better throughoutput....so I recommnend it...
by rado3105
Mon Sep 08, 2014 12:01 am
Forum: Wireless Networking
Topic: Best Version to be use in Mikrotik Products
Replies: 1
Views: 621

Re: Best Version to be use in Mikrotik Products

for 2,3,5 routeros v6.19 and wireless-fp enabled and newest bootloader
by rado3105
Thu Aug 21, 2014 6:38 pm
Forum: Scripting
Topic: Api to connect to router, disable queue simple
Replies: 7
Views: 1545

Re: Api to connect to router, disable queue simple

thanks, I just realized that I can use SSH:)
by rado3105
Thu Aug 21, 2014 6:21 pm
Forum: Scripting
Topic: Api to connect to router, disable queue simple
Replies: 7
Views: 1545

Re: Api to connect to router, disable queue simple

I want to use it from routeros to routeros, what client will be ideal (simple and working in this case?)
by rado3105
Thu Aug 21, 2014 5:13 pm
Forum: Scripting
Topic: Api to connect to router, disable queue simple
Replies: 7
Views: 1545

Api to connect to router, disable queue simple

Is possible to create api to log in router, disable queue simple....?
can anybody help to create it?
thanks
by rado3105
Thu Aug 21, 2014 1:17 pm
Forum: General
Topic: Throughoutput using v6.15 and wireless-fp
Replies: 16
Views: 2574

Re: Throughoutput using v6.15 and wireless-fp

can anybody try it and confirm?
by rado3105
Thu Aug 21, 2014 1:00 pm
Forum: General
Topic: Please add MONTH parameter in scheduller
Replies: 15
Views: 1896

Re: Please add MONTH parameter in scheduller

Please could you add month parameter in scheduller? One question: For example, supposing the parameter exist, what must happen if for some reason script can not be run, for example, power failure, etc. What you expect to happen? And at what time you expect to run the script? at midnigth of first da...
by rado3105
Sun Aug 03, 2014 10:02 pm
Forum: Wireless Networking
Topic: v6.15 only-hardware-queue causes degradation of link
Replies: 6
Views: 2172

Re: v6.15 only-hardware-queue causes degradation of link

problem still persists...I cant reset wireless link it is in production enviroment....
by rado3105
Sun Aug 03, 2014 9:59 pm
Forum: General
Topic: Throughoutput using v6.15 and wireless-fp
Replies: 16
Views: 2574

Re: Throughoutput using v6.15 and wireless-fp

The problem still persists, I tryed v6.17, v6.18. If traffic goes over more than one router(connected with ethernet cable) throughoutput is abou half....also tryed turn off auto negotiation and fixed 100FD...without success...
by rado3105
Thu Jul 31, 2014 6:59 pm
Forum: Wireless Networking
Topic: Explanation: cros pollarization, port to port izolation
Replies: 1
Views: 500

Explanation: cros pollarization, port to port izolation

What describes this terms and what values are desirable? lower, higher?
by rado3105
Thu Jul 31, 2014 3:29 pm
Forum: Wireless Networking
Topic: mANT real tests
Replies: 2
Views: 1143

Re: mANT real tests

I dont see there any comparisons and results, am I missing something?
by rado3105
Wed Jul 30, 2014 3:24 pm
Forum: RouterBOARD hardware
Topic: QRT 5 questions
Replies: 4
Views: 1454

Re: QRT 5 questions

Did you test it? what are results?
by rado3105
Wed Jul 30, 2014 3:20 pm
Forum: Wireless Networking
Topic: mANT real tests
Replies: 2
Views: 1143

mANT real tests

Did anybody test this antenna and compared it to Rocket Dish, Jirous extreme antennas?
are any shields in plan for future versions?
by rado3105
Wed Jul 30, 2014 2:10 pm
Forum: Wireless Networking
Topic: auto TDMA in NV2 causes throughoutput drop if goes over ethe
Replies: 3
Views: 1070

auto TDMA in NV2 causes throughoutput drop if goes over ethe

auto TDMA in NV2 causes throughoutput drop if traffice goes over ethernet. (in 802.11a). Why? without auto tdma it works without problem.... rb2011(v5.25)(1)--ethernet--rb411(802.11a, v6.17)(2)---wireless---rb433ah(3)(v6.17) without auto tdma: btest 20 tcp down from 3 to 2, throughoutput: 40mbit/s b...
by rado3105
Wed Jul 30, 2014 11:09 am
Forum: Wireless Networking
Topic: wireless-fp and 802.11a devices are supported?
Replies: 6
Views: 999

wireless-fp and 802.11a devices are supported?

is supported 802.11a?
by rado3105
Wed Jul 30, 2014 12:20 am
Forum: Wireless Networking
Topic: BaseBox5/NetBox5 RF shield
Replies: 7
Views: 2096

Re: BaseBox5/NetBox5 RF shield

the rf shield of rocket titanium was problem of overheating..in new AC rockets...is new kind of rf shield...
by rado3105
Wed Jul 30, 2014 12:18 am
Forum: Wireless Networking
Topic: New wireless-fp and packetloss [Solved]
Replies: 11
Views: 3765

Re: New wireless-fp and packetloss

in PtP after one week of using wireless-fp and auto tdma...seems no problems
by rado3105
Wed Jul 30, 2014 12:15 am
Forum: Wireless Networking
Topic: Dual nstreme and wireless-fp and v6.15 any changes?
Replies: 27
Views: 4421

Re: Dual nstreme and wireless-fp and v6.15 any changes?

using wireless-fp I had to manualy set full duplex 100mbit/s on ethernet ports....because of lost connection, low throughoutput
by rado3105
Sat Jul 19, 2014 10:47 pm
Forum: General
Topic: how to disable wireless-fp and downgrade from v6.15 to v6.10
Replies: 1
Views: 473

how to disable wireless-fp and downgrade from v6.15 to v6.10

Is that possible without losting configuration?
by rado3105
Sat Jul 19, 2014 10:33 pm
Forum: RouterBOARD hardware
Topic: ethernet problem in rb711 v6.16, v6.17
Replies: 0
Views: 502

ethernet problem in rb711 v6.16, v6.17

I have problems with rb711-5hn where is v6.15 firmware, problems with ethernet started after upgrade from v6.10 to v6.15...there is activated wireless-fp package....

is disconnects, ehternet up and down....it is in bridge mode (wlan1, ether1), no parameters in rx stats(ethernet)
by rado3105
Thu Jul 17, 2014 2:25 pm
Forum: Wireless Networking
Topic: v6.15 only-hardware-queue causes degradation of link
Replies: 6
Views: 2172

Re: v6.15 only-hardware-queue causes degradation of link

I cant reset configuration it is in production enviroment. It is 802.11N, MIMO antennas on both side, on one side rb433ah + r52nM, on other side is sextant, distance is 500m, on both sides about 15 networks. Protocol nv2, v6.15, wireless-fp, tdma auto... I test it using bandwitch test utility in ros...
by rado3105
Thu Jul 17, 2014 11:32 am
Forum: Wireless Networking
Topic: Dual nstreme and wireless-fp and v6.15 any changes?
Replies: 27
Views: 4421

Re: Dual nstreme and wireless-fp and v6.15 any changes?

Good to know, my MT trainer told me to stay away from up/down converters , so I must change my mind :D Do not expect verly long range link... I suggest max 16Km, on 23,5 Km I'm forced to use pure 5GHz... ehm... For long distance link you need 2mt dish, with pure 17GHz device... I also have one Ligo...
by rado3105
Thu Jul 17, 2014 12:12 am
Forum: RouterBOARD hardware
Topic: power comparison of PPC CPU and MIPSBE CPU?
Replies: 3
Views: 2317

Re: power comparison of PPC CPU and MIPSBE CPU?

rb850Gx2 has only 500mhz CPU...so in one thread application will be slower than rb2011?
by rado3105
Thu Jul 17, 2014 12:06 am
Forum: Wireless Networking
Topic: v6.15 only-hardware-queue causes degradation of link
Replies: 6
Views: 2172

v6.15 only-hardware-queue causes degradation of link

I tried to chang wireless default to only-hardware-queue on wireless interface with wireless-fp package on nv2 link....but throughoutput was less stable and dropped from 65mbit/s to 45mbit/s...
what is best to use for wireless if I want to use fastpath?
by rado3105
Wed Jul 16, 2014 11:14 pm
Forum: RouterBOARD hardware
Topic: power comparison of PPC CPU and MIPSBE CPU?
Replies: 3
Views: 2317

power comparison of PPC CPU and MIPSBE CPU?

What is more powerfull PPC or MIPSBE CPU with same frequencies?
by rado3105
Wed Jul 16, 2014 11:12 pm
Forum: General
Topic: Throughoutput using v6.15 and wireless-fp
Replies: 16
Views: 2574

Re: Throughoutput using v6.15 and wireless-fp

I tried every queing method and different queue sizes. May be it is how small tcp acks are grouped in nv2 packets. It adds up with every hop and it is different in up and downlink. If you leave all the rest unchanged and set (e.g.) nstream the problem disappears ? No. As I have newer ROS installed ...
by rado3105
Wed Jul 16, 2014 8:43 am
Forum: General
Topic: Throughoutput using v6.15 and wireless-fp
Replies: 16
Views: 2574

Re: Throughoutput using v6.15 and wireless-fp

one is on channel 5600mhz, another 5320mhz...they are 15cm distance between...
by rado3105
Wed Jul 16, 2014 12:45 am
Forum: General
Topic: Throughoutput using v6.15 and wireless-fp
Replies: 16
Views: 2574

Throughoutput using v6.15 and wireless-fp

One link (dual mimo antennas, 3km, on each side 20 networks), throghoutput 80Mbit/s. Second link(one polarized antennas, 2km, on each side 20 networks) rb433ah(1)----wireless---(one linke)---rb912--ethernet--rb433ah(2)----wireless(second link)----rb711(3) when I do test from 1 to 2 throughoutput 20 ...
by rado3105
Tue Jul 15, 2014 1:47 pm
Forum: General
Topic: Cant upgrade from 5.26 to 6.15
Replies: 5
Views: 1152

Re: Cant upgrade from 5.26 to 6.15

how I solved it: log in terminal and reboot using it:
system reboot (yes)....
by rado3105
Tue Jul 15, 2014 1:46 pm
Forum: Wireless Networking
Topic: Dual nstreme and wireless-fp and v6.15 any changes?
Replies: 27
Views: 4421

Re: Dual nstreme and wireless-fp and v6.15 any changes?

dual nstreme is like one existent but abandoned technology on favour to 802.11n, MIMO and nv2
but till now none of this is so rock solid as DUAL NSTREME..also in noisy enviroment....
by rado3105
Tue Jul 15, 2014 1:45 pm
Forum: General
Topic: Please add MONTH parameter in scheduller
Replies: 15
Views: 1896

Re: Please add MONTH parameter in scheduller

One month interval is always one month long. ☺ Yeah, except that one month isn't a constant interval of time. When we say "one month" we mean "this date, next month, or the last possible date of the next month if the next month is bigger". So if it's 4 March, we want to go to 4 April, and if it's 4...
by rado3105
Tue Jul 15, 2014 1:43 pm
Forum: General
Topic: NV2 Latency vs. Airmax latency
Replies: 12
Views: 5151

Re: NV2 Latency vs. Airmax latency

I upgraded and used wireless-fp package with auto tdma option. The latency drop down from 6ms to 2ms...so this is great and comparable to ubnt devices. But problem is throughoutput which drops down during busy hours(from 17:00 to 22:00) from 47mbit/s(one polarized antenna, 802.11N) to 9mbit/s...and ...
by rado3105
Mon Jul 14, 2014 9:26 pm
Forum: Wireless Networking
Topic: Dual nstreme and wireless-fp and v6.15 any changes?
Replies: 27
Views: 4421

Dual nstreme and wireless-fp and v6.15 any changes?

Are any improvements in dual-nstreme using wireless-fp or v6.15?
by rado3105
Mon Jul 14, 2014 6:06 pm
Forum: General
Topic: Cant upgrade from 5.26 to 6.15
Replies: 5
Views: 1152

Cant upgrade from 5.26 to 6.15

I uploaded to rb433ah upgrade package 6.15. Now there 5.26. I rebooted many times router without upgrade...why?
by rado3105
Mon Jul 14, 2014 1:02 pm
Forum: General
Topic: Please add MONTH parameter in scheduller
Replies: 15
Views: 1896

Re: Please add MONTH parameter in scheduller

yes monthly...
by rado3105
Mon Jul 14, 2014 1:01 pm
Forum: General
Topic: NV2 Latency vs. Airmax latency
Replies: 12
Views: 5151

Re: NV2 Latency vs. Airmax latency

NV2, just 2 hops, r52nM cards, mmcx, rb951, 2km, same enviroment like ubnt... http://i41.tinypic.com/2vayyh3.jpg 5 hops in same enviroment on ubnt airmax: http://i42.tinypic.com/i2rigl.jpg Can you do mikrotik something to solve the biggest problem of nv2? - latency,...that is the reason it cant be ...
by rado3105
Mon Jun 09, 2014 8:40 pm
Forum: General
Topic: Please add MONTH parameter in scheduller
Replies: 15
Views: 1896

Please add MONTH parameter in scheduller

Please could you add month parameter in scheduller?
by rado3105
Sun Jun 01, 2014 11:26 am
Forum: RouterBOARD hardware
Topic: Mikrotik POE - big problem, why you dont make similar like U
Replies: 7
Views: 2038

Re: Mikrotik POE - big problem, why you dont make similar li

I've never played with sxt jet ..is the same used for omnitik ? If so, I've experienced some troubles with it and I've changed with the simple/common one Yes it is this one....crap... The problem is that we dont have so many ubnt spares...and it is problem to use this craps...despite sxt devices ar...
by rado3105
Sun Jun 01, 2014 8:55 am
Forum: RouterBOARD hardware
Topic: Mikrotik POE - big problem, why you dont make similar like U
Replies: 7
Views: 2038

Mikrotik POE - big problem, why you dont make similar like U

I am very unsatisfied with mikrotik poe shipped with sxt devices. When you have e.g. just notebook and this is connected to it and changing more times it causes destroying of the ends. And also there is problem that manipulation is very bad(very short). Also I have problems with some notebooks, ethe...
by rado3105
Sun Jun 01, 2014 8:51 am
Forum: Wireless Networking
Topic: NV2 if in switch/bridge throughoutput drop by 2/3
Replies: 5
Views: 1803

Re: NV2 if in switch/bridge throughoutput drop by 2/3

this problem is caused with Simple queues, when they are disabled througoutput is ok. I use default queue type, what queue type you recommend to use in Simple queues?
That pfifo with packet size you mean to use on all interfaces: ethernet, wlan?
by rado3105
Thu May 08, 2014 5:41 pm
Forum: Wireless Networking
Topic: NV2 if in switch/bridge throughoutput drop by 2/3
Replies: 5
Views: 1803

Re: NV2 if in switch/bridge throughoutput drop by 2/3

This is another ap, I send you all configs screens. The client is sextant(1) in routed mod(wireless station bridge)---wireless 2km---ap(rb33ah + rocket ubnt big sector antenna)(ethernet + wlan card are in bridge)(2)--ethernet 100mbit/s--rb2011(3) If I do bttest 1 or 20 tcp from sextant(1)...to rb912...
by rado3105
Mon May 05, 2014 11:18 pm
Forum: Wireless Networking
Topic: Mikrotik competition: Ligowave deliberant APC
Replies: 4
Views: 1945

Re: Mikrotik competition: Ligowave deliberant APC

I am using mikrotiks as routers....ubnt mainly as wireless....now I started to use mikrotiks as aps(on ptm), not in ptp because of high nv2 latency....


so I can you for wireless what I want and also for routing what I want....not like you say whole:)
by rado3105
Mon May 05, 2014 11:16 pm
Forum: Wireless Networking
Topic: NV2 if in switch/bridge throughoutput drop by 2/3
Replies: 5
Views: 1803

NV2 if in switch/bridge throughoutput drop by 2/3

I had this scenario: sxt-lite5-klient(1)----wireless---wlan1-sxt-sar2-ap(2)-ether1----ethernet---rb2011(3) in sar2 ap(2) there was bridge between interface ether1 and wlan1. throughoutput between 1 and 2 was 80mbit/s (1tcp) throughoutput between 1 and 3 was 28mbit/s (1tcp) after disabling bridge in ...
by rado3105
Sun May 04, 2014 1:50 pm
Forum: Wireless Networking
Topic: Mikrotik competition: Ligowave deliberant APC
Replies: 4
Views: 1945

Re: Mikrotik competition: Ligowave deliberant APC

I am thinking of competition in wireless.....
by rado3105
Sun May 04, 2014 12:17 am
Forum: Wireless Networking
Topic: Mikrotik competition: Ligowave deliberant APC
Replies: 4
Views: 1945

Mikrotik competition: Ligowave deliberant APC

Real-time spectral analyzer.

Propietary protocol ipoll.

2 firmwares in case of upgrade failure.

http://www.streakwave.com/Itemdesc.asp?ic=PROPELLER%2D5

this product is alternative to sxt lite, with the same price but with possibility of mode AP
by rado3105
Wed Apr 02, 2014 12:48 pm
Forum: RouterBOARD hardware
Topic: RB 912 UAG-5hpnd-out instead Rocket M5 Titanium
Replies: 7
Views: 3073

Re: RB 912 UAG-5hpnd-out instead Rocket M5 Titanium

Yes in enviroments that we changed ubnt for mikrotiks we got higher throughoutput...at least 30%, in many case much more...mainly in noisy enviroment....
by rado3105
Wed Apr 02, 2014 8:31 am
Forum: RouterBOARD hardware
Topic: Does anybody use 2 wireless cards in rb912
Replies: 2
Views: 768

Does anybody use 2 wireless cards in rb912

Hi,
rb912 has possibiity to use another minipcie wireless card....does anybody use it?
What about noise?
by rado3105
Mon Mar 31, 2014 3:28 pm
Forum: General
Topic: QRT-2 new device?
Replies: 17
Views: 4899

Re: QRT-2 new device?

sxt SA is sector antenna I cant imagine it on ptp links.....it has 90 degree beamwidth.....use parabolic antennas + mikrotik in alluboxes and you get much better results and dont make noise in enviroment (like you do when you use SXT SA on ptp links...this are for PtM)
by rado3105
Fri Mar 28, 2014 2:36 pm
Forum: General
Topic: rb951, EOIP tunnel and ethernet errors?
Replies: 3
Views: 591

Re: rb951, EOIP tunnel and ethernet errors?

after upgrade problem persists...

here is the scheme:
internet--eth1-rb951(v6.10)--eth2---eth1s--rb951(second)--eth5+tunnel(eoip in bridge eth5+tunnel)--x86(v5.26)

I dont think that there is problem in both devices..and also in ethernet cables---because there are 2 different eth. cables...
by rado3105
Thu Mar 27, 2014 10:43 pm
Forum: General
Topic: rb951, EOIP tunnel and ethernet errors?
Replies: 3
Views: 591

rb951, EOIP tunnel and ethernet errors?

Hi, I have two rb951 routers connected to other network devices, there is runnig eoip tunnel, v6.10 firmware and there is a lot of ethernet errors...what is the cause? cable tested using routeros ethernet testing with result ok...
can be the problem eoip tunnel?
by rado3105
Mon Feb 10, 2014 3:46 pm
Forum: Scripting
Topic: 2 commands at the same time, how?
Replies: 2
Views: 768

Re: 2 commands at the same time, how?

Is possible to run 2 different commands at the same time using one script?
by rado3105
Mon Feb 10, 2014 1:46 am
Forum: Scripting
Topic: 2 commands at the same time, how?
Replies: 2
Views: 768

2 commands at the same time, how?

I want to start this commands at the same time (blue and red): :local thisbox [/system identity get name] :local thistime [/system clock get time] :local bitps :local result /tool bandwidth-test 10.11.11.11 duration=8s tcp-connection-count=1 direction=transmit protocol=tcp user=blabla password=blabl...
by rado3105
Tue Feb 04, 2014 12:56 am
Forum: General
Topic: Please recommend storage media for RouterOS for x86
Replies: 2
Views: 619

Please recommend storage media for RouterOS for x86

I tryed USB, but router freezed after a few weeks (I couldnt login to winbox).
So I tryed CFtoSATA adapter but after connecting Routeros using this storage CPU usage was abou 40% more than using USB.


So please could you recommend me some workinG storage for RouterOS?
Routeros 5.26.

Thanks
by rado3105
Mon Feb 03, 2014 8:37 pm
Forum: General
Topic: 1 PCI-E eth. card and one mini-pcie-e card, pci-e eth. prob
Replies: 0
Views: 417

1 PCI-E eth. card and one mini-pcie-e card, pci-e eth. prob

When I have r11e-5hnd connected to x86 board and at the same time also ethernet adapter to pci-e , this adapter doesnt work. Only when there is just one pci-e card. System is routeros 5.26. So I tryed to use 6.9, in this v6 works both pci-e at the same time. I cant use v6.9 because of instability an...
by rado3105
Mon Feb 03, 2014 7:45 pm
Forum: General
Topic: 2x more CPU usage when RouterOS runs from SATA CF card, why?
Replies: 3
Views: 878

Re: 2x more CPU usage when RouterOS runs from SATA CF card,

Can you please recommend any adapter with controller supported by ROS?

Image
Image
Image
by rado3105
Mon Feb 03, 2014 1:41 am
Forum: General
Topic: 2x more CPU usage when RouterOS runs from SATA CF card, why?
Replies: 3
Views: 878

2x more CPU usage when RouterOS runs from SATA CF card, why?

Hi, I have x86 machine with dualcore intel CPU - Atom. When I had system Routeros, that ran from USB CPU went max. to 30%, but there was problems with freezing - couldnt get to the router. So I changed it for Compact Flash connected to SATA using adapter. But after changing CPU consumes 2x more powe...
by rado3105
Mon Jan 20, 2014 1:02 pm
Forum: RouterBOARD hardware
Topic: Can routerOS v5 utilize 2 or more cores on x86 CPU?
Replies: 1
Views: 683

Can routerOS v5 utilize 2 or more cores on x86 CPU?

Can routerOS v5 utilize 2 or more cores on x86 CPU?
by rado3105
Sun Jan 19, 2014 3:52 pm
Forum: RouterBOARD hardware
Topic: Dualcore routerboards - rb433ahX2 when?
Replies: 5
Views: 1559

Re: Dualcore routerboards - rb433ahX2 when?

It looks great. What is supposed price? What frequency of CPU? Is that dualcore?
by rado3105
Sun Jan 19, 2014 10:09 am
Forum: RouterBOARD hardware
Topic: Dualcore routerboards - rb433ahX2 when?
Replies: 5
Views: 1559

Re: Dualcore routerboards - rb433ahX2 when?

935? can you tell more?
by rado3105
Sun Jan 19, 2014 1:59 am
Forum: RouterBOARD hardware
Topic: Dualcore routerboards - rb433ahX2 when?
Replies: 5
Views: 1559

Dualcore routerboards - rb433ahX2 when?

When you plan release dualcore routerboards?
by rado3105
Sun Jan 19, 2014 1:57 am
Forum: General
Topic: Disable traffic over one gw and start over second NO INTERRU
Replies: 0
Views: 318

Disable traffic over one gw and start over second NO INTERRU

I have to WAN - based on policy routing - using mangle - mark routing(at one time goes traffice just over one gw, they automatically change from one gw to another). When I switch one wan to second WAN, the users are about 30s without internet.
Is anyway to change it without interrupt?
by rado3105
Thu Jan 16, 2014 11:21 pm
Forum: General
Topic: Cant update routerboard from 3.08 to 3.10
Replies: 3
Views: 1308

Cant update routerboard from 3.08 to 3.10

I upgraded routeros from 6.4 to 6.7 - successfully.
After this I updated routerboard in terminal: system routerboard upgrade yes
Then I restarted router....it didnt upgrade routerboard...

I repeated this steps 5 times, without success. Why?
by rado3105
Tue Dec 10, 2013 8:23 pm
Forum: RouterBOARD hardware
Topic: How to rebuild rb14 for external power not from PCI, Scheme?
Replies: 0
Views: 473

How to rebuild rb14 for external power not from PCI, Scheme?

Hi,
can anybody help me how to rebuild rb14 to be powered not from PCI slot but from external power source(e.g. 12V molex).
Mikrotik, please could you give mi scheme of rb14?
by rado3105
Mon Dec 09, 2013 2:31 pm
Forum: RouterBOARD hardware
Topic: on rb433ah signal -55/-53, rb14 with same signal -80/-79
Replies: 2
Views: 738

Re: on rb433ah signal -55/-53, rb14 with same signal -80/-79

pleasu could you draw some scheme what to use and how...to power it external? Thanks
by rado3105
Sun Dec 08, 2013 10:36 am
Forum: RouterBOARD hardware
Topic: on rb433ah signal -55/-53, rb14 with same signal -80/-79
Replies: 2
Views: 738

on rb433ah signal -55/-53, rb14 with same signal -80/-79

I have rb433ah with r52n-M signal is -55/-53...when I change it for x86 and rb14 with the same cable, same cards, same pigtails, same antena....the signal is -80-79...I tryed different rb14, different minipci cards..same problem.
Can be this problem of motherboard? Chipset? Power?
by rado3105
Sat Dec 07, 2013 11:27 pm
Forum: RouterBOARD hardware
Topic: rb14 on x86 with routeros 5.25 cant see cm9 minipci card
Replies: 4
Views: 1001

Re: rb14 on x86 with routeros 5.25 cant see cm9 minipci card

2 LEDs are for one card? What does it mean if just one is lighting, what if two? what if none? what if they are blinking?
by rado3105
Sat Dec 07, 2013 10:17 am
Forum: RouterBOARD hardware
Topic: rb14 on x86 with routeros 5.25 cant see cm9 minipci card
Replies: 4
Views: 1001

Re: rb14 on x86 with routeros 5.25 cant see cm9 minipci card

I tryed on that board ethernet pci card, it worked. SO pci is working.
I tryed same routeros on another motherboard with the same rb14, same cm9 it worked.
Maybe problem of voltage of motherboard?
by rado3105
Fri Dec 06, 2013 11:38 pm
Forum: RouterBOARD hardware
Topic: rb14 on x86 with routeros 5.25 cant see cm9 minipci card
Replies: 4
Views: 1001

rb14 on x86 with routeros 5.25 cant see cm9 minipci card

Hi, I have cm9 minipci card connected to motherboard using rb14, but routeros 5.25 doesn see cm9 card....

why?
by rado3105
Fri Nov 15, 2013 3:21 pm
Forum: General
Topic: Btest - more than 50% consumes flash in tools-profile, why?
Replies: 6
Views: 1484

Re: Btest - more than 50% consumes flash in tools-profile, w

Is that problem of rb750up alone, or other routerboards are also affected?
by rado3105
Fri Oct 25, 2013 8:09 pm
Forum: General
Topic: adress lists for ROUTE
Replies: 2
Views: 775

Re: adress lists for ROUTE

I use more internet service providers and I route some services(according to dst address) to various providers...
by rado3105
Fri Oct 25, 2013 4:01 pm
Forum: RouterBOARD hardware
Topic: Power consumption of rb44ge iddle 4-5W
Replies: 8
Views: 1452

Re: Power consumption of rb44ge iddle 4-5W

intel pro/1000gt consumes 0,5-1W
by rado3105
Fri Oct 25, 2013 2:47 pm
Forum: General
Topic: Btest - more than 50% consumes flash in tools-profile, why?
Replies: 6
Views: 1484

Re: Btest - more than 50% consumes flash in tools-profile, w

Nobody can explain? why flash consumes so much CPU during btest?
by rado3105
Fri Oct 25, 2013 2:31 pm
Forum: RouterBOARD hardware
Topic: Power consumption of rb44ge iddle 4-5W
Replies: 8
Views: 1452

Re: Power consumption of rb44ge iddle 4-5W

http://en.wikipedia.org/wiki/Active_Sta ... Management

is ASPM supported by routerOS? Is it good idea to enable it on motherboard in bios?
by rado3105
Fri Oct 25, 2013 2:22 pm
Forum: Wireless Networking
Topic: NSTREME and DUAL-NSTREME on N cards, do you plan to solve it
Replies: 16
Views: 3998

Re: NSTREME and DUAL-NSTREME on N cards, do you plan to solv

it is big shame that there is only ubiquity and mikrotik in this segment relating to price.... more companies...more competition... Mikrotik needs to hire new employes, like ubiquiti does that. They hire just best persons from field...
by rado3105
Fri Oct 25, 2013 2:20 pm
Forum: RouterBOARD hardware
Topic: Power consumption of rb44ge iddle 4-5W
Replies: 8
Views: 1452

Re: Power consumption of rb44ge iddle 4-5W

I tested board without card and then with card, without connected ethernet cables.
by rado3105
Fri Oct 25, 2013 1:52 pm
Forum: RouterBOARD hardware
Topic: Power consumption of rb44ge iddle 4-5W
Replies: 8
Views: 1452

Power consumption of rb44ge iddle 4-5W

Why is the power consumption of this etherent adapter so high?
by rado3105
Wed Oct 23, 2013 9:00 am
Forum: Wireless Networking
Topic: NSTREME and DUAL-NSTREME on N cards, do you plan to solve it
Replies: 16
Views: 3998

Re: NSTREME and DUAL-NSTREME on N cards, do you plan to solv

Mikrotik you could wake up and make protocol 10 years old update to be realizable on new cards and in new enviroment....
Dual Nstreme despite how old is, is very good protocol.
UBNT released device with 500/500Mbit speed for 5ghz (airfiber5), do you plan to make something similar?
by rado3105
Tue Oct 22, 2013 10:49 pm
Forum: General
Topic: Btest - more than 50% consumes flash in tools-profile, why?
Replies: 6
Views: 1484

Btest - more than 50% consumes flash in tools-profile, why?

I do btest from rb750up to rb2011, Download is ok and also speeds are ok. But when I do upload test, the speed goes from 40mbit/s to 1mbit/s, interface doesnt shows speed.... When I looked in tools-profile during upload test, it showed that more than 50% of cpu is consumed by flash. What it means? I...
by rado3105
Sun Oct 20, 2013 10:23 pm
Forum: General
Topic: adress lists for ROUTE
Replies: 2
Views: 775

adress lists for ROUTE

Is possible to add possibility to choose address list in routes. Because now is possible just ip or network....and I am in situation I need a lot of ip address and mangle not work good for that....
by rado3105
Wed Sep 18, 2013 7:57 pm
Forum: General
Topic: Ubnt Multi-lane RF technology
Replies: 0
Views: 816

Ubnt Multi-lane RF technology

http://community.ubnt.com/t5/UniFi/Mult ... d-p/566055


interesting tech new from ubnt...another inspiration for Mikrotik?
by rado3105
Fri Aug 30, 2013 9:44 pm
Forum: General
Topic: Building secure firewall
Replies: 7
Views: 5090

Re: Building secure firewall

Do you understand differences in chains (input,forward)? There are many unnecessary rules. 19? 20? 21? 22? Maybe better accept access for ssh or icmp or another services from trusted network? Try to disable unused services in "/ip service". I connect to local network using vpn in this gateway. I pi...
by rado3105
Thu Aug 29, 2013 1:10 am
Forum: General
Topic: Building secure firewall
Replies: 7
Views: 5090

Re: Building secure firewall

0 ;;; Drop invalid connections chain=input action=drop connection-state=invalid 1 ;;; Port scanners to list chain=input action=add-src-to-address-list protocol=tcp psd=21,3s,3,1 address-list=port scanners address-list-timeout=2w 2 ;;; NMAP FIN Stealth scan chain=input action=add-src-to-address-list...
by rado3105
Fri Aug 23, 2013 5:53 pm
Forum: General
Topic: Building secure firewall
Replies: 7
Views: 5090

Building secure firewall

Here is my firewall, I am still working on it. I would like to share it and hear your opinions, what to change, what is missing...ether1 is internet.... 0 ;;; Drop invalid connections chain=input action=drop connection-state=invalid 1 ;;; Port scanners to list chain=input action=add-src-to-address-l...
by rado3105
Mon Jul 01, 2013 7:46 pm
Forum: General
Topic: NV2 Latency vs. Airmax latency
Replies: 12
Views: 5151

NV2 Latency vs. Airmax latency

NV2, just 2 hops, r52nM cards, mmcx, rb951, 2km, same enviroment like ubnt... http://i41.tinypic.com/2vayyh3.jpg 5 hops in same enviroment on ubnt airmax: http://i42.tinypic.com/i2rigl.jpg Can you do mikrotik something to solve the biggest problem of nv2? - latency,...that is the reason it cant be u...
by rado3105
Tue Jun 04, 2013 3:23 pm
Forum: General
Topic: How to show pps in graphs?
Replies: 0
Views: 425

How to show pps in graphs?

Is possible to show pps in graphs?
Are you Mikrotik plan to implement it in future in graphs?
If not, can it be done other way?(cacti?)...
by rado3105
Tue Jun 04, 2013 1:24 pm
Forum: RouterBOARD hardware
Topic: Real performance use of routerboards?
Replies: 4
Views: 1302

Re: Real performance use of routerboards?

Now I had the problem, on rb433ah running dual nstreme...normaly there was no problem in tcp speed 1 connection or 20 connections showed the same speed... But in evening times, when there are opened tousends of connections, despite processor going on 20% and also nothing informative in tools profile...
by rado3105
Tue Jun 04, 2013 1:20 pm
Forum: RouterBOARD hardware
Topic: Rb2011 ports freezing, restart helps...
Replies: 8
Views: 2317

Re: Rb2011 ports freezing, restart helps...

It is not solved in v6.0....
Mikrotik knows about that bug in rb2011, hope to do repair it in next releases
by rado3105
Sun May 26, 2013 6:03 pm
Forum: RouterBOARD hardware
Topic: Rb2011 ports freezing, restart helps...
Replies: 8
Views: 2317

Rb2011 ports freezing, restart helps...

I have rb2011 with ros 5.25, new bootloader and sometimes randomly freeze som ethernet ports, only reboot helps...
I heard from other ISPs that this is problem of rb2011 and drivers, when ports change to bridge chip...

Do you plan to repair it? on ros v5 or just on v6?
by rado3105
Thu May 16, 2013 2:38 pm
Forum: RouterBOARD hardware
Topic: What is more powerful rb2011 or rb450g?
Replies: 18
Views: 7609

Re: What is more powerful rb2011 or rb450g?

rb2011 in my tests is stable with v6rc8(after loading firmware, one freeze, power cycle and works 2months without problem. Interesting that every upgrade to rc8 it freezed once and after power off it works.) I tryed rc11,12,13 many freezes, reboots.
Thanks for test. 1. on the internet.
by rado3105
Sat Apr 27, 2013 11:45 am
Forum: RouterBOARD hardware
Topic: Real performance use of routerboards?
Replies: 4
Views: 1302

Re: Real power use of routerboards?

No power consumption, sorry for bad word.. I mean system pefermorance, acutal use of sytem performance ..(in comparison with max. systems performance)
by rado3105
Sat Apr 27, 2013 1:27 am
Forum: RouterBOARD hardware
Topic: Real performance use of routerboards?
Replies: 4
Views: 1302

Real performance use of routerboards?

How to find out real performance use of routerboards. CPU index is not precise and despite that router has only 15% CPU use is dead(high latency, cant do bandwitch test...)..
???
Thanks
by rado3105
Sat Apr 27, 2013 1:21 am
Forum: RouterBOARD hardware
Topic: What is more powerful rb2011 or rb450g?
Replies: 18
Views: 7609

Re: What is more powerful rb2011 or rb450g?

I am also interested what stable overclock do you use?
by rado3105
Tue Apr 16, 2013 11:40 pm
Forum: RouterBOARD hardware
Topic: Which rb2011 has voltage monitor? also rb2011l?
Replies: 2
Views: 836

Which rb2011 has voltage monitor? also rb2011l?

Which has voltage monitor?
by rado3105
Tue Apr 16, 2013 11:25 pm
Forum: RouterBOARD hardware
Topic: What is more powerful rb2011 or rb450g?
Replies: 18
Views: 7609

What is more powerful rb2011 or rb450g?

Can you tell me what is more powerful and by how many percents?
by rado3105
Tue Apr 16, 2013 11:13 pm
Forum: General
Topic: Btest server on the internet?
Replies: 0
Views: 452

Btest server on the internet?

Hi, does anybody know about any btest server on internet(routeros), it could be great to test connectivity...
by rado3105
Tue Apr 16, 2013 11:12 pm
Forum: General
Topic: RouterOS v6.0rc13 released
Replies: 81
Views: 27681

Re: RouterOS v6.0rc13 released

upgrade on rb2011 to rc13 caused many reboots, so back to rc11...
  • 1
  • 2