MikroTik

rado3105

How can I find out which dual sfp pci-e card is supported in routeros? thanks.

rado3105

I have this error in new dude server, also clients..privileges for admin are all matched

27Mar2020_11-50-04.jpg

rado3105

I have as central rb4011, there are more ptp links going out. One of them is AF5X. I had problems with everything connected to rb4011. Latency on ethernet went up to 100ms. After months of laboring I find problem with af5x ethernet. I connected between af5x and rb4011 switch and this solved the prob...

rado3105

Config is changed in v7

/routing table
add fib name=xx vrf=main
/ip route
add dst-address=8.8.8.8^xx gateway=10.155.101.1@main
/ip route rule 
add dst-address=1.1.1.1 action=lookup table=xx

router marking is not working in v7. Can you confirm it?

rado3105

I cant define vrf in v7, also not in terminal...

rado3105

I tryed it according your mannual and is not working, it doesnt send markedpackets packets using that new way? is it really working? why did you changed, it worked without problem in v6. What does itmean vrf? main?

rado3105

How to add this rule to routeros v7?
add comment=domx disabled=yes distance=3 gateway=11.11.7.1 routing-mark=domx
can anybody help?

rado3105

I solved it connecting disk from routeros to linux machine using usb, deleted file routeros v7.npk with 0b size and after that it runs, also there is configuration I installed before this problems

rado3105

22Feb2020_11-00-33.jpg

- the files cannot be deleted also using filezilla and ssh connection
- it shows only read permissions
- i tryed to change some configuration, but after restart everrything is lost
- also reset configuration didnt helped...

rado3105

I upgraded my x86 router. I had to upload there .npk file to files. After restart, v7 was there. But configuration was completely deleted.

this is interesting:

21Feb2020_23-37-29.jpg

rado3105

What are the reasons to move v7?

What I found till now.
- it is new kernel with better hardware support, mainly x86

rado3105

Is possible to upgrade routeros from v6 to v7 using system/pacakges?

it shows me errors:

27Nov2019_13-51-38.jpg

rado3105

I installed on sata disk mikrotik routerOS and have problem to use keyboard, ethernets. Is q170 chipset supported by any version of routeros?
https://ark.intel.com/content/www/us/en ... ipset.html

rado3105

Are true rumours that EU didnt certified Mikrotik LHG 60 and wont in future?

rado3105

I want to use some ip (it is in firewall as forward chain), Can I use raw with prerouting and it will do the same?

rado3105

I cant anywhere find rb44ge.
I was trying intel 1000 dual nic but there are ping lostst and instability.
Can you recommend any dual 1gbit/s network ethernet card to pci-express compatible with routeros?
thanks

rado3105

I also tryed 64800 and it was worse..why you think lower channels are better?
signal before freeze winter was 80, now is worse...

rado3105

Yesterday evenning started first freezing weather, temperature below -5st.C and the units started disconnects and connects. Rapid changing in signal, RSSI...Nothing other happened, nothing new in the way. It seems like there is problems with frost on the units. What are experiences of others? Distan...

rado3105

Everytime I change ethernet cards, or x86 router...there is problem with backup restoration. Full backup restore or compact is not possible. I had to load compact and every command in text document past in terminal. Also it is not possible to put it there everything at once, it freezes. This problem...

rado3105

I have one link usin LHG 60 on 900m. During very heavy rain, which took a part for 5 minutes LHG went completely down. So in 60G propably maximal recommended distance would be 1km...

rado3105

Is possible to buy L4 licence for LHG 60G? Thanks

rado3105

I had 3 mangle rules that used content filtering and it massively used CPU. Is any better alternative for content filtering?

rado3105

If I have virtual RouterOS - want it for dude and bandwitch tests. How it is with license. Is it connected to .vdi? Because sometimes it happened that I just need to copy .vdi to other machine (after hardware failure, reinstall). What happens with license? Is it lost or it is still working?

rado3105

I started to have problem with rb44ge during high load, about 300Mbit/s and 20 000pps. Does anybody know how much pps can go through rb44ge?

rado3105

Hi, I was trying to use dude to update routeros, but it didnt upgraded bootloader and I had many times problems with old bootloader.

Is anyway to mass upgrade bootloader using dude?

rado3105

viewtopic.php?f=7&t=128916&p=637268#p637268

nv2 is not working, also there is not possible to upgrade LHG 5ac from 6.41 to 6.42.rc9

rado3105

nv2 ap 6.42.rc9, klient lhg 5ac 6.41
low connection parametres, no ping, connected but not working...

rado3105

Same problem here, with LHG 5AC.

I cant upgrade LHG 5ac from 6.41 to 6.42.rc9. I tryed using system/packages - download and install after reboot there is still 6.41. I also tryed copy ros file using ssh filezilla but also the same.

Also there is missing download file for LHG 5ac on mikrotik site.

rado3105

What kind of traffic do you filter using RAW. I cant find anything interesting except SSH block login users using RAW. Can you give me some idea? do you use it?

rado3105

I have problems restoring configuration from one routerboard to another one. This happens everytime I chane slower router for better. I tryed export and import.rsc and it shows errors like this: failure: already have device with such name but from what is there written I cant find out where it stops...

rado3105

Any news about mu-mimo and Mikrotik? Do you plan any routerboards suppporting MU-MIMO? When?

rado3105

can mikrotik run script via ssh to remote mikrotik?? i really need to know, i have tried ssh-key on Ubuntu-to-Mikrotik and its working fine, but Mikrotik-to-Mikrotik its asking password and not passing through.. need feedback from anyone please /ip ssh set always-allow-password-login=yes in what ve...

rado3105

any news?

rado3105

Can anybody help what is best way to mark and limit MS services like updates and so on..?

rado3105

We installed our first Mimosa A5 last week and hooked now some 35 SXT's on it. Last night I finally could do some test with several clients each capable of 25mbs (limit by simple queue in central) Allthough compared to the Omnitik previously running 25 clients that could not produce more than some ...

rado3105

Just a few SQ rules causes noticeable CPU consumption. Is it possible in some way to lower this consumption? Or what to use instead. I could use Queue tree - but in that way I lost possibility to see graphs of individual SQ rules...

rado3105

If I use simple queue to limit max individual user downloads...what queue type would be ideal to prevent full upload of services like BITS and Microsoft unwanted traffic consumption?

rado3105

Microsoft makes use of own protocol named BITS, that is based on HTTP. The whole traffic is encrypted (SSL/TLS) and used ports vary a lot. Summary: it works like torrent and thus is impossible to be detected by firewall and blocked/limited. Is any way to find out what is microsoft gathering about u...

rado3105

Of course the fact that a client uses full upload on their connection does not necessarily mean it is due to this feature. It can also mean their PC has been hacked (trojan software installed) and is being used in DDoS attacks etc. Reading the FAQ document above it is easy to turn this feature off,...

rado3105

We starting to have problems with clients complaining about slow opening web pages etc. And when I look at their traffic history almost full upload to internet.
Nobody has this problems?

rado3105

Thanks a lot for great explanation. But what if ip is in address list with different name? I example: src-address-list=!THELIST action=add-src-to-address-list address-list=THELIST - but ip will be in thelist1 and I dont want to add any ip present in address list named by different name... is possibl...

rado3105

On the rule that adds things to an address list, just add this: src-address-list=!myAddressList (assuming you're checking/adding the source address) If there is ip range in address list e.g. 192.168.0.0/24 and that rule with src-address-list=!myAddressList wants to add ip address 192.168.0.5. What ...

rado3105

I have some ranges in address list with static ip addresses. But some get there dynamicaly (content mark...and so on...). But ip gets inside address list also when the whole range of ip that belong to is there. Is possible to add just ip addresses that are not in address list and also in ip range, t...

rado3105

sob you are right, it wasnt enabled....

rado3105

This card tested in RouterOS 6.35. System identify this card, but it disconnects every few second.
Is that supported? or why not?

rado3105

Is possible to generate RSA key in RouterOS?
Is possible to comunicate using this RSA key with SSH between 2 mikrotiks?

rado3105

On x86 with rotueros installation I installed dude server v6.35.1. The same I installed as client exe on windows 7. I am connecting to ip address of server dude, changed login and I cant connect. I use default port 2210. Why? Is any way to change server settings without connecting to it using client?

rado3105

Any news? Same problem in Slovakia

rado3105

I added pci-e dual ethernet card and use this two ethernets instead of integrated and it works now in v6 like a charm.
Ethernet card: Intel EXPI9402PT NC360T - 2x ethernet, pcie-e 1x

rado3105

In comparison with integrated realteks I have worse latency, can be that because of this pcie?

rado3105

according to that, it should be ok...

rado3105

I fitted 4x card in 1x slot...just cut the end of the pcie....

rado3105

Today I starte to use rb44ge 4x pcie ethernet card in jnc9t with PCIE 1x. I am using just 2 ports, another 2 ports I disabled. Should I expect any problems? thanks

rado3105

After freezing one integrated ethernet I get inside using the second one ethernet and there were tx/rx drops on ethernet:

25Mar2016_11-37-40.jpg

rado3105

Does anybody use this ethernet? I have problems with them under v6, but this problems was not present in v5.
RTL8111G

rado3105

This board Jetaway jnc9t-1037 I had for 2 years with firmware v5, without problem. http://www.jetwaycomputer.com/NC9T.html After upgrade to v6 - the board freezes, seems problem with integrated ethernets. I also tryed upgrad to 6.34, 6.35 without succes. Also tryed Trafficflow auto on both ethernets...

rado3105

When you push scan button and have checked background it shows option not supported....please repair it....

rado3105

Any plans Mikrotik for future implementation?

rado3105

it is not intended to use it in harsh locations...

rado3105

Do you plan any alternative? because this is winner of price/power ratio....in AC segment...

rado3105

Airview like spectrum analyzer with second wireless chip - this is the future of 5GHz...and inclusion of this in routerboards and routeros can make Mikrotik wireless competitive...without that you lost in future...

rado3105

I just have tested Rocket AC ptp-lite vs. netmetal5 - same antennas, same position on tower..same testing procedure.. Rocket AC ptp-lite is 15-20% faster than Netmetal 5. In favor of Rocket AC and all ubiquity new AC gear is second wireless chip which scans enviroment all the time, without interrupt...

rado3105

Looking for cacti, but could try mrtg, what soft you are using for mrtg?

rado3105

Is anyway to use this rules to mark ongoing p2p traffic? thanks

rado3105

Does anybody have template for temperature, voltage, consumption for rb1100ahx2?

rado3105

In last versions before 6.30 it was possible to check last status of e-mail using /tool e-mail print...but in 6.30 it is gone....

how is this possible to test in new versions of routeros? thanks

rado3105

Zorro can you post some boards with that brasswel? I can find any, thanks

rado3105

Better indicator of noise. Noise indicator in status of wireless has no meaning if it does not take in account interference. (ubiquity has great indicator: interference+noise)

Also if it is very noise enviroment, routeros shows noise -113, but this is not real predictor....

rado3105

if you notice there are ethernet protections in photo of pcb, that can be replaced with new one...
this is great idea...

rado3105

*) fastpath - fixed wireless interface fastpath (broken in 6.33);

What was the result of this in 6.33?

rado3105

EdgeRouter from Ubiquity becoming very interesting routing platform
https://community.ubnt.com/t5/EdgeMAX-B ... d-id/12377

- it can do DPI and use outputs for routing, QOS....also detects torrents....

rado3105

Hope it will be released soon....

rado3105

I am waiting for something powerfull like this: https://www.indiegogo.com/projects/turr ... rce-router#/ from mikrotik

rado3105

UBNT has great tool airview, which scans the enviroment and collects noise...not just for second, but all the time. It could be great if you guys have add possibilities to collect all data on all channels during freq. scanner tool. Because like it is now, it has no meaning...

rado3105

I have no problem with my x86 system, just planning to upgrade it...

This mb has 50w power consumption: http://www.aliexpress.com/store/product ... 69834.html
is that possible?

rado3105

I use now this one: Jetaway JNC9T-1037 power consumption max. 15W (with transcend ssd 512MB module), meanwell power supply, no casing needed, dual ethernet intel pci express card (from ebay for 40Eur). So full price aroung 200Eur. Works like a charm for one year. But it will need replacement for som...

rado3105

MB+CPU which you recommend for RouterOS? With power like core i3, 2,5ghz? ideal low power consumption, 12-24V power supply... /like jetaway boards/

rado3105

I am using GRE tunnels, works great, simple....also MTU size ideal for all routerboards...

rado3105

Is that possible to be 2x higher latency in gre tunnel (plain gre, without encryption) than on direct link?

rado3105

it is set to 1500, rx, tx drops: 0

rado3105

Using interface/gre I created unsecured tunnel (point to point). I would like to ask, if it is any recommended MTU to be set? or it is just good to leave it default?

rado3105

Is that possible? I need to transfer all the traffic, also udp.
I read here http://wiki.mikrotik.com/wiki/OpenVPN that UDP is not supported. Is that actual?

rado3105

I have one wireless link, I tryed to make eoip tunnel over it. Without tunnel it has throughoutput 70mbit/s. Over tunnel EOIP it has throughoutput in TCP just 38Mbit/s. in UDP throughotput is same with or without tunnel. MTU is everywhere set on 1542. I tryed it on various wireless links, so it has ...

rado3105

Is there arm processor?
When it will be released?

rado3105

I see this errors in rb2011 where is connected rocket ac lite ptt, 1gbit/s full duplex.
Many rx fcs errors.
Does anybody have this problem?
I enabled rx/tx flowcontrol....

rado3105

Is better to set max. MTU on all interfaces on the path? or is better to set exact for EOIP.
What about interfaces with fastpath, is that also there needed?

rado3105

I have eoip tunnel between mk1-----mk6. But changed mtu to 1546 only in mk1 and mk6...not in mk2,mk3,mk4,mk5

is that needed to work tunnel correctly without fragmentation to change MTU in all mikrotiks in the way? (mk2,mk3,mk4,mk5)?
thanks

rado3105

what is maximum one way throughoutput (tcp) you get from netmetal in N or AC (only 20mhz channel size)?

rado3105

https://www.ubnt.com/airmax/litebeam-m5/
you could make something like this. Great price - 50 Eur, great power.very lightweight..but if it was MIMO it would be killer product...so Mikrotik make that killer product....

rado3105

It stops to transmitt and during scan doesnt find any network. The only solution is restart of routerboard.
Does anybody have problem with this wireless cards? It is in rb912 and I also changed it for new AC one model....

rado3105

I have one router that has no rules in firewall filter. But limits one network using SQ, but also the traffic except that network goes through router. I am thinking to make rule that will fasttrack all connections except that one network that uses SQ. Is it good idea? Will it lower CPU usage or not?...

rado3105

If I want to put just some IPs of /26 IP range it cant be seen in winbox, but what it worse, I cant see SQ speed limitation, cant change it. Why is it not possible to use range in SQ, like: 192.168.1.2-192.160.1.10..

Can it be solved, or do you plan it?

rado3105

I don't think so.

what I was comparing tests on routerboard.com rb2011 is in many ways at least 2x more powerfull than rb750r2

rado3105

is CPU more powerfull than in rb2011?

rado3105

what is the weight?
is it 23 od 25dBi?

what has better antenna for ptp links? qrt5ac or dynadish ac?

rado3105

thanks activation of wireless-fp helped

rado3105

Hi, on ap (rb912, ros 6.19) i have channel 5720 in uzbekistan. But on some clients (various sextants) it is not under Uzbekistan. But on some rb911 it is. Why?

rado3105

The rules are 1,2,3..for example from up to down in mangle
What I am asking is if they are processed from up to down, like 1>2>3 or not?

rado3105

I have 2 rules in mangle:
one that sends 2 ports of same ip over first wan and second mangle rule which sends all ports over second wan.
But the rule with two ports dont work, independent of that: the rule with 2 ports is on first place in mangle list. Why?

rado3105

There is only client version? no AP?

rado3105

In my case also. I tryed ac devices (Mikrotik) and compared them to N, using TCP tests, but N was better than AC. So we dont plan to use Mikrotik AC devices in near future. What I heard from folks in ISP business Ubnt has much better AC devices (at least 1/2 faster than Mikrotik), so maybe we try UB...

rado3105

Still having issues on this with V6.27 I have links that used to run at 75 meg not barely getting 30. But on UDP i can test at 100. Is their any way to fine tune NV2 as i can not find anything.

Try another firmware, lik 6.19 and also with wirelles-fp enabled..and give us know....

rado3105

siae has 20dB tx power, Racom just 5dB. This can be very useful for long links in case of bad weather to use ATPC...

For distance max. 4km is Racom by far the best wireless link in 17,24ghz spectrum...

rado3105

I recommend:
http://www.racom.eu/eng/products/microwave-link.html
(you can buy one link for 17ghz, 360mbit/s, lattency <1ms around 4000Eur with VAT, also with antennas) - but this link maximal for 4km

http://www.pojitko.cz/platforma

SIAE

rado3105

One rb941 do pppoe, routing, 4 queue tree rules, 3 nat rules and 20mbit/s traffic and cpu runs max. at 10%.

rado3105

I am trying latest rc version and FASTPATH status shows in rb2011 that fastpath is off. Despite that is enabled in ip settings and all conditions for fastpath are met (disabled connections tracking, queues, mangle..).
What is problem?

16Apr2015_23-43-59.jpg

rado3105

Now I confront with new problem:
Nstreme on 802.11a, on one site rb600, ros v6.27. Disconnects, almost every 2hours, despite great signal, SNR, minimal noise....after changing to nv2 problems dissapears, but lattency is high...

can anybody help?

rado3105

I just accidentally notice it, when client complain about speed....ros v6.20

08Apr2015_20-59-44.jpg

rado3105

What if I create tunnel EOIP on device that runs fastpath. Is it possible to run fastpath when EOIP tunnel is created?

rado3105

mikrotik please introduce some sxt like product with smips 5ghz and dual chain
limit features just to basic cpe

at approx $35 price that will make life of wisp easier
thanks

Yes this would be ubnt killer. And now 941 is mainly tplink killer!!!

rado3105

Is enought to connect to not used port only pigtail? to prevent damage power amp? or it must be antenna?

rado3105

What is maximum voltage, that can be put in hAP?

rado3105

ARM cpus are the future, have very fast development, power growth per year. They are made in quantities, so the price of made is low....

rado3105

The antennas are in the fron of my antenna, there is no way to communicate with competition ...and the clients of me are behind competitors antenas...

rado3105

The frequencies are 100mhz outside of those devices, but still I have problem to get good throughoutput problem is mainly with receive.
Why, what is the problem? Changing channels doesnt helps...
Is any way to solve it?

rado3105

This seems first time Mikrotik uses ARM cpu, will be packages for other boards based on ARM cpu? (like x86 package). And other interesting thing is Power, it is written that it is 2x more powerfull than rb2011, but this is too little for that specs (dualcore cpu, 2 times higher frequency than rb2011...

rado3105

Why, it is inspiration for MT to make devices better....and also on ubnt forum there are topics and it is not censored. So It could be great to post screens. What throughoutput you can get on 40mhz channel, what is distance, noise...thanks...

rado3105

What about throughoutput comparison with rb2011 (if used only 100Mbit/s ports)?

rado3105

Did anybody tested mimosa b5?

rado3105

I have problem with skype video, is any way how to prioritize it?

rado3105

http://mimosa.co/home/Products/Access-Point/A5-90.html

Inspiration for Mikrotik? MU-MIMO is future and place for us to be able to compete with Big Providers (DSL, optics...)

rado3105

MT had great superior DUAL Nstreme (many many years old technology, that could compete also in these times.....)...it is shame that they didnt tune it for many years....

rado3105

I am not sure, but seemed like DDOS...

rado3105

under attack tarpit made my router unresponsive and internet went down....for local users, not for attacker....

rado3105

No this post was not meant to leave Mikrotik wireless...but to be better in wirelless...we need mikrotik and we prefere ptm devices Mikrotik with NV2 over UBNT (they are much cheaper, backward compatible, better throughoutput, minimal faultiness in comparison with UBNT)

rado3105

According to some texts it is better to use reject instead of drop in case of failure....because DROP could kill your router....and make it unreachable

rado3105

Here is written that there is better way not tu use DORP, but only reject in Firewall. What you think about that?
http://www.chiark.greenend.org.uk/~pete ... -vs-reject

rado3105

Internet stopped to work, or very slow. Latency went from 5ms to 1000ms. Many times not possible to get into winbox. CPU was not 100%. I have this rule as prevention against syn flood: /ip firewall filter add chain=forward protocol=tcp tcp-flags=syn connection-state=new \ action=jump jump-target=SYN...

rado3105

airFiber 5X Uses Dual Polarized Slant 45 antennas, or you can upgrade a Rocket™link that uses a RocketDish™ RD‑5G30/RD‑5G34* antenna. A dipole, which is set at a slant of +45° when viewed from the front, will appear to be vertically polarized when viewed from the side and will then appear at a slant...

rado3105

What will be your response Mikrotik?
http://www.ubnt.com/airfiber/airfiber5x/

rado3105

I dont use ipsec

rado3105

also the same for 802.11n on rb433ah, throughoutput lower by half than in 6.19

rado3105

I am using wireless-fp....wireless....on 6.19 without problem....and I forgot it is 802.11a...

rado3105

After upgrading older routerboards (rb711, rb433ah) from v6.19...to v 6.24 throughoutput dropped by half. But this happened only on older routerboards. Why?

rado3105

Do you plan to use MU-MIMO technology in your gear?

rado3105

Does anybody know some opensource system for billing and managment. I found: 1: lms (lan management system) - pretty outdated, not good documented and with complicated installation 2. FreenetIS - good documented, easy installation, good cooperation with developers (they program for you what you want...

rado3105

- another point, after ros 6.19 bandwitch test for tcp is completely not working correctly, it shows bad throughoutput and mostly sinusoid type TCP Test has never been working correctly. The CPU-load goes to 100% and is limiting the bandwidth. Often the link ist not the limit. For TCP-Tests I put R...

rado3105

older versions than 6.19 had problems with 1gbit ports connected to 100mbit/s...it has to be manually selected 100mbit/s in eth. interface, new version seems to solve it...so this was bug of RouterOS - another point, after ros 6.19 bandwitch test for tcp is completely not working correctly, it shows...

rado3105

you said clearly in title that is a comparison.
Read in your link what hardware was used.

I am telling you again: celeron is not quadcore but dualcore, and not 2ghz but 1,8ghz...so read at first and then comment...

rado3105

Rf elements have a good aluminium box that fit onto airmax sectors. Inside you can put a RB7xx or RB91x. It's calles station box S

it is plastic....

rado3105

Comparison is made between a dual core Atom at 1.8Ghz and quad core Celeron at 2Ghz.
I can say for sure that an Lamborghini is faster than a truck.

no it is celeron 1,8ghz dual core....
and this was published here for users to see that routeros 5.26 works on this board without problem...

rado3105

Here is comparison in real situation in routeros 5.26.
http://lokalnyisp.net/viewtopic.php?f=4 ... dbe19#p601

these two motherboards:
Jetaway nf-96u-525 (Intel Atom) vs Jetaway JNC9T-1037 (intel celeron dual core 1,8ghz).

rado3105

Bandwitch test doesnt work....
Traffic generator seems not to work with tcp...
How to test tcp?

rado3105

Could anybody make example for 2 routerboards connected wireless? normis?

rado3105

Can anybody answer?

rado3105

Hi, I couldnt find manual how to test bandwitch using traffic generator betwen two routers..is that possible? can anybody in short write me how? thanks

rado3105

bandwitch test is not working correctly, very unstable and 2x slower than in 6.19...propably problem with optimization....
the last version where btest is working correctly je 6.19....did anybody notice it?
Mikrotik why did you mess bandwitch test?

rado3105

contrary to v6.19 much lower wirelles throughoutput (2 times less sometimes), bad wireless stability, bandwitch test not working correctly....

rado3105

but problem is that it cant be used in script..also telnet...can anybody help how to connect from one routeros device to another one using script?

rado3105

When I have in router routeros v6.19...throughoutput is 50Mbit/s (nv2, 2x2)...after upgrade to 6.22, or 6.20 bandwitch test shows very unstable througoutput from 17mbit/s to 30mbit/s....(20tcp, one way)...after downgrade throughoutput is stable, 50mbit/s...

Did anybody notice this?

rado3105

local tx, rx limits during bandwitch test dont limit test...

rado3105

I want to make skript, which will do bandwitch test and if throughoutput will be less than X it will send me email. I have this 2 scripts, If I run it separately they run without problem. But If I run skript2 using skript1 it will start, but didnt log message. Script1: /tool bandwidth-test 10.x.x.x ...

rado3105

yes this is worse alternative....can anybody answer if it is possible in one script?

rado3105

Is possible to run 2 different commands at the same time in routeros scripts?

rado3105

http://en.jirous.com/antenna-5ghz/jrc-29-duplex

could you make inspiration from this? extra buyable shield (withou it is useless in noisy enviroment) and also pigtails are not covered in mant, the are on direct sun and are heated...and cause losses

rado3105

Does anybody have active working bonding?
sure

what kind? ospf, eoip(what mode of balancing balance-rr, xor..)? which is best for 2 wireless nv2 links

rado3105

Does anybody have active working bonding?

rado3105

balance alb : 34mbit/s dropping to 4mbit/s, but better latency...

Now I noticed that when I do bandwitch test data goes only through one eoip tunel. Why?

rado3105

I am bonding two wirelless links. Each links has throughoutput 50mbit/s. They are bonded using balance-rr. When I test throughoutput of bonded link it has throughoutput less than one link throughoutput, less than 50mbit/s. I used this manual to create it: http://wiki.mikrotik.com/wiki/Bonding_Exampl...

rado3105

I had v6.18 installed and after changing public ip ip cloud didnt changed it. I had to come on place and do force-update manually. Why?
I upgraded to v6.19, hope it solved this problem.

rado3105

I connected sextant to 23dBi sektor antenna in 20 000 people town, pretty noisy. The link from client to ap goes through town. DIstance is 3km. And throghoutput from sextant to ap is 10mbit/s (1 tcp) and 40-50mbit/s down 1 tcp.

rado3105

for me wireless-fp and new v6.19 gave every mk wireless device much more stability, better throughoutput....so I recommnend it...

rado3105

for 2,3,5 routeros v6.19 and wireless-fp enabled and newest bootloader

rado3105

thanks, I just realized that I can use SSH:)

rado3105

I want to use it from routeros to routeros, what client will be ideal (simple and working in this case?)

rado3105

Is possible to create api to log in router, disable queue simple....?
can anybody help to create it?
thanks

rado3105

can anybody try it and confirm?

rado3105

Please could you add month parameter in scheduller? One question: For example, supposing the parameter exist, what must happen if for some reason script can not be run, for example, power failure, etc. What you expect to happen? And at what time you expect to run the script? at midnigth of first da...

rado3105

problem still persists...I cant reset wireless link it is in production enviroment....

rado3105

The problem still persists, I tryed v6.17, v6.18. If traffic goes over more than one router(connected with ethernet cable) throughoutput is abou half....also tryed turn off auto negotiation and fixed 100FD...without success...

rado3105

I tryed 6.18 without success

rado3105

What describes this terms and what values are desirable? lower, higher?

rado3105

I dont see there any comparisons and results, am I missing something?

rado3105

Did you test it? what are results?

rado3105

Did anybody test this antenna and compared it to Rocket Dish, Jirous extreme antennas?
are any shields in plan for future versions?

rado3105

http://forum.mikrotik.com/viewtopic.php?f=7&t=87572

I am testing it and have this problem...

rado3105

auto TDMA in NV2 causes throughoutput drop if traffice goes over ethernet. (in 802.11a). Why? without auto tdma it works without problem.... rb2011(v5.25)(1)--ethernet--rb411(802.11a, v6.17)(2)---wireless---rb433ah(3)(v6.17) without auto tdma: btest 20 tcp down from 3 to 2, throughoutput: 40mbit/s b...

rado3105

is supported 802.11a?

rado3105

the rf shield of rocket titanium was problem of overheating..in new AC rockets...is new kind of rf shield...

rado3105

in PtP after one week of using wireless-fp and auto tdma...seems no problems

rado3105

using wireless-fp I had to manualy set full duplex 100mbit/s on ethernet ports....because of lost connection, low throughoutput

rado3105

Is that possible without losting configuration?

rado3105

I have problems with rb711-5hn where is v6.15 firmware, problems with ethernet started after upgrade from v6.10 to v6.15...there is activated wireless-fp package....

is disconnects, ehternet up and down....it is in bridge mode (wlan1, ether1), no parameters in rx stats(ethernet)

rado3105

I cant reset configuration it is in production enviroment. It is 802.11N, MIMO antennas on both side, on one side rb433ah + r52nM, on other side is sextant, distance is 500m, on both sides about 15 networks. Protocol nv2, v6.15, wireless-fp, tdma auto... I test it using bandwitch test utility in ros...

rado3105

Good to know, my MT trainer told me to stay away from up/down converters , so I must change my mind :D Do not expect verly long range link... I suggest max 16Km, on 23,5 Km I'm forced to use pure 5GHz... ehm... For long distance link you need 2mt dish, with pure 17GHz device... I also have one Ligo...

rado3105

rb850Gx2 has only 500mhz CPU...so in one thread application will be slower than rb2011?

rado3105

I tried to chang wireless default to only-hardware-queue on wireless interface with wireless-fp package on nv2 link....but throughoutput was less stable and dropped from 65mbit/s to 45mbit/s...
what is best to use for wireless if I want to use fastpath?

rado3105

What is more powerfull PPC or MIPSBE CPU with same frequencies?

rado3105

I tried every queing method and different queue sizes. May be it is how small tcp acks are grouped in nv2 packets. It adds up with every hop and it is different in up and downlink. If you leave all the rest unchanged and set (e.g.) nstream the problem disappears ? No. As I have newer ROS installed ...

rado3105

one is on channel 5600mhz, another 5320mhz...they are 15cm distance between...

rado3105

One link (dual mimo antennas, 3km, on each side 20 networks), throghoutput 80Mbit/s. Second link(one polarized antennas, 2km, on each side 20 networks) rb433ah(1)----wireless---(one linke)---rb912--ethernet--rb433ah(2)----wireless(second link)----rb711(3) when I do test from 1 to 2 throughoutput 20 ...

rado3105

how I solved it: log in terminal and reboot using it:
system reboot (yes)....

rado3105

dual nstreme is like one existent but abandoned technology on favour to 802.11n, MIMO and nv2

but till now none of this is so rock solid as DUAL NSTREME..also in noisy enviroment....

rado3105

One month interval is always one month long. ☺ Yeah, except that one month isn't a constant interval of time. When we say "one month" we mean "this date, next month, or the last possible date of the next month if the next month is bigger". So if it's 4 March, we want to go to 4 ...

rado3105

I upgraded and used wireless-fp package with auto tdma option. The latency drop down from 6ms to 2ms...so this is great and comparable to ubnt devices. But problem is throughoutput which drops down during busy hours(from 17:00 to 22:00) from 47mbit/s(one polarized antenna, 802.11N) to 9mbit/s...and ...

rado3105

Are any improvements in dual-nstreme using wireless-fp or v6.15?

rado3105

I uploaded to rb433ah upgrade package 6.15. Now there 5.26. I rebooted many times router without upgrade...why?

rado3105

yes monthly...

rado3105

NV2, just 2 hops, r52nM cards, mmcx, rb951, 2km, same enviroment like ubnt... http://i41.tinypic.com/2vayyh3.jpg 5 hops in same enviroment on ubnt airmax: http://i42.tinypic.com/i2rigl.jpg Can you do mikrotik something to solve the biggest problem of nv2? - latency,...that is the reason it cant be ...

rado3105

Please could you add month parameter in scheduller?

Search found 492 matches