Community discussions

MUM Europe 2020

Search found 31 matches

by bluestar
Fri Jul 11, 2014 11:37 pm
Forum: General
Topic: BGP LOCAL-AS feature needed
Replies: 0
Views: 820

BGP LOCAL-AS feature needed

Please add in bgp neighbor local-as command. It is different then confederation. Remote peer will see first Your local-as and then Your BGP number in AS-path. That way You can have another neighbor as standard AS peer. This can be useful if we have 2 upstream internet providers , local-as can do gre...
by bluestar
Sat Feb 13, 2010 12:14 pm
Forum: Scripting
Topic: Functions in CMD Scripts
Replies: 21
Views: 28765

Re: Functions in CMD Scripts

All our logins are dinamicly changed at random itervals. We have radious server corectly configured in production. Our clients Mikrotik Routers which use L2TP tunnels authentification to central office need also to have automaticly and periodicly changes in password for authentification. For that fu...
by bluestar
Fri Feb 05, 2010 1:14 pm
Forum: Scripting
Topic: Functions in CMD Scripts
Replies: 21
Views: 28765

Re: Functions in CMD Scripts

Can someone post MD5 calculating functions, please ?

I need mikrotik script to calculate md5 values od some parameters to be used in other scripts.
by bluestar
Mon Oct 06, 2008 10:08 pm
Forum: General
Topic: Feature request Authentificated L2TP tunnels
Replies: 3
Views: 1351

Feature request Authentificated L2TP tunnels

We wish that Mikrotik support Authentificated L2TP tunnels, so we can then replace couple of ours cisco with Mikrotik. Here is Cisco config: vpdn enable ! vpdn-group 1 accept-dialin protocol l2tp virtual-template 1 terminate-from hostname cvxtunel source-ip 212.200.XXX.XXX l2tp tunnel password 0 pas...
by bluestar
Sat Oct 04, 2008 9:50 am
Forum: General
Topic: L2TP
Replies: 3
Views: 945

Re: L2TP

But, problem is here becouse LAC is at our public Telekom and they insist to have l2tp tunnel authentication like : l2tp tunnel password 0 pass1 so we need to have that type of configuration. At our side is LNS and we are searching solution how to replace our cisco with Mikrotik and to be able to us...
by bluestar
Fri Oct 03, 2008 10:22 am
Forum: General
Topic: L2TP
Replies: 3
Views: 945

L2TP

Did Mikrotik support Authentificated L2TP tunnels, so we can then replace couple of ours cisco with Mikrotik. Here is Cisco config: vpdn enable ! vpdn-group 1 accept-dialin protocol l2tp virtual-template 1 terminate-from hostname cvxtunel source-ip 212.200.XXX.XXX l2tp tunnel password 0 pass1 ! vpdn...
by bluestar
Wed May 14, 2008 4:42 pm
Forum: General
Topic: Authentificated L2TP tunnels
Replies: 0
Views: 681

Authentificated L2TP tunnels

Do You plain to support Authentificated L2TP tunnels, so we can then replace couple of ours cisco with Mikrotik. Here is Cisco config: vpdn enable ! vpdn-group 1 accept-dialin protocol l2tp virtual-template 1 terminate-from hostname cvxtunel source-ip 212.200.XXX.XXX l2tp tunnel password 0 pass1 ! v...
by bluestar
Thu Nov 08, 2007 8:26 pm
Forum: General
Topic: Two concurent PPTP connections from same routerboard to same
Replies: 10
Views: 1742

Re: Two concurent PPTP connections from same routerboard to same

ISP use mikrotik as PPTP-Server. Between ISP PPTP server and clientes are wireless infrastructure. Bouth customers have agreement for their usernames and passwords with ISP. To reduce cost for equipment becouse this two customers live near eachother they try to reduces costs for Hardware and inestea...
by bluestar
Thu Nov 08, 2007 1:00 am
Forum: General
Topic: Two concurent PPTP connections from same routerboard to same
Replies: 10
Views: 1742

Re: Two concurent PPTP connections from same routerboard to same

We need two tunels. Tunels have diferent usernames and passwords for two diferent customers. ISP limit customers trafic on PPTP connections so first customer named Alex have bandwidth 1MB/s and second customer named John have bandwidth 512 kb/s . So instead of purchashing 2 routerboards with 1 ether...
by bluestar
Wed Nov 07, 2007 9:17 pm
Forum: General
Topic: Two concurent PPTP connections from same routerboard to same
Replies: 10
Views: 1742

Re: Two concurent PPTP connections from same routerboard to same

Yes we use ip pool and we also can use radius to specify IP address. The configuration of pptp-client configured at routerboard 192 are shown on the pictures. PPTP server is Mikrotik instaled at X86 intel PC . All version of software are 2.9.48 Bouth PPTP connections are established but one route is...
by bluestar
Wed Nov 07, 2007 2:34 pm
Forum: General
Topic: Two concurent PPTP connections from same routerboard to same
Replies: 10
Views: 1742

Re: Two concurent PPTP connections from same routerboard to same

I also try enabling PPTP in /ip firewall service, but the same situation happened. Routerboard place sucessfulny one PPTP clinet connections, and when it place second then this route is not active ( blue colour into winbox without A ) I need maybe to set something with filters or with arp I am not s...
by bluestar
Tue Nov 06, 2007 11:44 pm
Forum: General
Topic: Two concurent PPTP connections from same routerboard to same
Replies: 10
Views: 1742

Two concurent PPTP connections from same routerboard to same

We have routerboard 192. Our ISP authentificate customers using PPTP. Couple of us ( customers ) connect our network to each lan port of routerboard. Routerboard use wireless connection to ISP. Wlan connect itself cucessfuly. We need to made two PPTP-clinet connections to the same IP. Then we need t...
by bluestar
Fri Aug 17, 2007 12:04 pm
Forum: The User Manager
Topic: User Manager Feature request - sticky please?
Replies: 193
Views: 54329

Re: User Manager Feature request - sticky please?

It will be good to add optional feature: if User Manager can chech Calling-statuin-id attribute beffore allow user to log-in. It can be interested when dial-up users are allowed to log-in only from specific phone numbers and for ADSL ( all adsl from Huawei have specific firmware and default user gue...
by bluestar
Mon Aug 13, 2007 2:26 am
Forum: The User Manager
Topic: Calling-Station-ID Radius Attribute
Replies: 1
Views: 2492

Calling-Station-ID Radius Attribute

It will be good to add optional feature: if User Manager can chech Calling-statuin-id attribute beffore allow user to log-in. It can be interested when dial-up users are allowed to log-in only from specific phone numbers and for ADSL ( all adsl from Huarei have specific firmware and default user gue...
by bluestar
Sun Jul 29, 2007 1:30 pm
Forum: General
Topic: Cannot Get PPTP tunnel to work without Nat
Replies: 7
Views: 1327

Re: Cannot Get PPTP tunnel to work without Nat

If You do not need bridged environmeny You can assigned static routes or use OSPF and than place tunels if You need it.
by bluestar
Wed Mar 07, 2007 11:00 pm
Forum: General
Topic: Problem: Mikrotik and L2TP Tunnel Authentication
Replies: 7
Views: 2622

L2tp Tunel authentification

As You , we are very interested for implementing that feature on Mikrotik too.
by bluestar
Fri Dec 01, 2006 11:31 pm
Forum: RouterBOARD hardware
Topic: Discconecting via Radius Incoming option
Replies: 3
Views: 1400

HI, Jeremy We are also searching how to implement radius re-atuh fatuser of mukrotik.

P.S. Where are You from? to exchange expirience ? SR ?
by bluestar
Tue Nov 21, 2006 1:47 pm
Forum: General
Topic: l2tp tunnel authentication
Replies: 0
Views: 813

l2tp tunnel authentication

We have Cisco working as LNS to accept connections from LAC Part of cofiguration is: vpdn-group 2 accept-dialin protocol l2tp virtual-template 1 terminate-from hostname tunelcisco source-ip xxx.xxx.xx.x l2tp tunnel password 0 cisco We wish to change this Router with Mikrotik, and we need to keep l2t...
by bluestar
Sat May 13, 2006 1:27 am
Forum: General
Topic: How to define total-queue dinamically?
Replies: 5
Views: 1245

I mean that it will be good to have dinamicly created queue to have its parent. For example if we have static queue for bandwith limit=256k and than to be able to create dinamicly queues which will have its parent, so all dinamicly queues will share 256k together. now all dinamicly created queues ha...
by bluestar
Thu May 11, 2006 10:31 pm
Forum: General
Topic: How to define total-queue dinamically?
Replies: 5
Views: 1245

[quote="sergejs"]rate-limit can set only following parametrs, rx-rate[/tx-rate] [rx-burst-rate[/tx-burst-rate] [rx-burst-threshold[/tx-burst-threshold] [rx-burst-time[/tx-burst-time] [priority] [rx-rate-min[/tx-rate-min]]]] to get additional features, use static queues for HotSpot users.[/quote] We ...
by bluestar
Sun May 07, 2006 7:20 pm
Forum: Scripting
Topic: custome firewall rules per user
Replies: 3
Views: 2019

Please give example for Mark-id and filter-id atributes

I am searching how to configure Mark-Id radius attribute , becouse there is no info about radius ID for mark-id to be able to import it into disctionary.

Also, can someone post example for using filter-id as radius atribute
for defining per user custom firewall rules.
by bluestar
Sun May 07, 2006 4:33 pm
Forum: General
Topic: More Radius options
Replies: 4
Views: 2581

More Radius options

It will be nice to implement more options for radius client, for example
setting PARENT-QUEUE in Rate-Limit attribute ,
and put Mark-Id and Filter-Id to work with PPPoE and with PPTP too.
by bluestar
Sun Feb 19, 2006 8:57 pm
Forum: General
Topic: ADSL and MiKrotik
Replies: 1
Views: 615

ADSL and MiKrotik

Have anybody some idea is it passible to start ADSL providing ( ISP ) with Mikrotik instead of router. Can Mikrotik support On High PC platform 3.8 G with PCI-X fast ethernet card 1000 ADSL concurent connections ? Any expirience, limits using ethernet cards and PC platfoms in compartion with cisco 7...
by bluestar
Tue Feb 07, 2006 11:16 am
Forum: General
Topic: Radius Disconnect
Replies: 12
Views: 8482

I have the same problem.
I send support file to support@mikrotik.com , but still no sollution in replay.
Have anyone any sucessful solution for Radius Disconnect to working fine ?
by bluestar
Fri Feb 03, 2006 10:50 pm
Forum: General
Topic: Radius Disconnect
Replies: 12
Views: 8482

I also have the similar problem:

I found the similar problem and possible bug in funcionality. When mikrotik is configured to work as PPTP server and radius client, also radius incoming is enabled. Users can sucessfuly connect to mikrotik using PPTP and everything is working fine. When "Disconnect-Message" come from radius server t...
by bluestar
Sat Jan 28, 2006 10:41 pm
Forum: General
Topic: Freeradius used to get accurate bandwidth statistics
Replies: 16
Views: 5288

Example dor radius disconnect message

Has anybody some example for radius disconnect message sintax or
some for simulations ?
by bluestar
Thu Jan 26, 2006 3:23 am
Forum: The Dude
Topic: Support for radius packet of disconnection ( POD )
Replies: 3
Views: 2248

Any example, Please

Please post any example for POD or "Disconnect-Message" working with
Mikrotik. We have pptp clients which need to be desconnected using radius incoming features on mikrotik.
by bluestar
Thu Jan 19, 2006 2:47 pm
Forum: The Dude
Topic: Support for radius packet of disconnection ( POD )
Replies: 3
Views: 2248

Support for radius packet of disconnection ( POD )

I am wery interesting for using POD as described in:

http://www.propersoft.ru/phonesoft/doc/cisco_pod.pdf

Does Mikrotik support this feature.
by bluestar
Wed Jan 18, 2006 9:57 pm
Forum: General
Topic: Radius Packet of disconnecting
Replies: 0
Views: 798

Radius Packet of disconnecting

Does Mikrotik support radius POD ( packet of disconnecting user )
as descibed in:
http://www.propersoft.ru/phonesoft/doc/cisco_pod.pdf

Thanks.
by bluestar
Fri Dec 23, 2005 4:19 am
Forum: General
Topic: Bridge dissapears in 2.9.10
Replies: 1
Views: 885

Also I have the same problem . I am using wds nstream, and have in bridge ether1 and wds1 interface ( using static wds bridge ). When I reboot the router i found another interface uknown and invalid. Then I remove it and reboot router. Then I can see it again. It start happened in 2.9.10, but with 2...
by bluestar
Thu Dec 01, 2005 12:16 am
Forum: Wireless Networking
Topic: Better Performanse 3 or 4 Routerboard 532?
Replies: 0
Views: 926

Better Performanse 3 or 4 Routerboard 532?

I need to connect (bridge ) location A and C through lication B becouse A and C are not directly visible. Distance from A to B is 10 km and from B to C is 15 km. I use nstrime. Is it better to use 3 boards as: A is RB 532 with SR5 working as AP-bridge with WDS, B is RB 532 with 2 SR5 one working as ...