https://www.youtube.com/watch?v=AkBIQxi ... l=MikroTikThis is very confusing: on hAP ac now I have a WiFi menu, completely useless and a Wireless that is the correct one.
Why???
When it involves changing actual code of RC version - i would agree with you.So stuff that was inside a release candidate is withdrawn.
Mikrotik is totally bonkers!!!!
If it is filesystems issue and it might be one, upgrade will not solve it, you will need to netinstall it with newest netinstall, to get newest filesystem up and running.The "Rare Config loss" issue is unfortunately still present for sure...
i will just leave this here:sorry misread the original post. max-prefix-limit most likely will not be added.
no i don't, and 99% of people that scroll through this post will not notice that ether.You read?
The device are far away, not in the same room...
What's new in 6.47beta54 (2020-Apr-06 06:32):
Changes in this release:
*) wireless - improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
*) wireless - improved system stability on hAP ac^2;
Where did you get beta4?They are actively developing v7. Perhaps they choose not to release every iteration to the public until there is a significant changelog. Personally I have found them to be very responsive and helpful.
And yes the CLI is a bit different to get used to.
these changes are starting from v6.43.12, this change was already there, so it will not show up in 6.44 changelogv6.44 does not contain:
""!) winbox - improvements in connection handling to router with open winbox service (CVE-2019–3924);" ?
It is no information in changelog.
CRS332-32S+RM + community feedback == CRS326-24S+2Q+RM in latest MUM opening presentations.CRS332-32S+RM
CRS354-48P-4S+2Q+
CRS354-48G-4S+2Q+
still nothing ?
:"(
That works, thanks! Can this be the cause for my trouble with wireless package?set frequency-mode to regulatory-domain
*) package - use bundled package by default if standalone packages are installed as well;
home Ethernet eXchangehEX ?
mAP ? micro Access Point ?
All deployments that are scheduled for deployment are stress-tested here on the table, it just happens to be bonding setup with pair of CCR1072, at that particular moment.tested beta version on CCR1072 ?
/interface bridge settings
set use-ip-firewall=yes use-ip-firewall-for-vlan=yes
your hope is misplaced, any news like that would be saved for MUM Europe anyways, not some monthly newsletter.Was hoping for some 802.11ax news... really hope there's something coming soon!
i think you must use S+RJ10 instead.Isn't this compatible with the S-RJ01 ? Someone might want to use it for some reason.
It is not shown as a related product.
S..t happens, but i'm loving the reaction time tho.Breaking the bootloader in a "stable" release...
So far all devices i tried connects just fine.What's new in 6.43rc56 (2018-Aug-13 11:13):
...
*) wireless - added option to disable PMKID for WPA2 (CLI only);
...
All my everyday devices still connects just fine.*) wireless - added option to disable PMKID for WPA2 (CLI only);
i think, at this moment in time you can squeeze only as much as they did in that form factor.Sadly hAP ac² missed the upgrade.
Sure and double your effort with all the certifications all around the world... no thanks.Please, insert in to Part Number a release code, p.e:
- release 1 with 128MB
- release 2 with 256MB
Like a RB750r2 and RB750Gr3....
Because they are different hardware.
Sorry, but "all station modes" mean "all station modes"So all client that use nstreme in station-bridge mode need to be upgraded too??802.11/nstreme client (all station modes)
Thanks
uuuu, winbox support for new bridge implementation....What's new in 6.41rc20 (2017-Aug-29 06:41):
RB850Gx2 Ethernets doesn't have fastpath support, MT doesn't have their own driver there, they use ones provided by CPU manufactures so that IPsec hardware acceleration works. I asked about this at the MUM.It doesn't work on RB850Gx2.
You need to move away from 5,5year old version, then you can use examples from the manual.Please anybody I need help
As far as i know it is single core, at least routerboard.com backs me up on that.ARM v7 Dual-Core @ 800 MHz
same here - so far so good.Neither of those things happened on my 1000AHx2 - PPPoE client and IPv6 are still there and enabled.
For us this is irrelevant, since we need to do some NATing for some customers... which breaks fastpath.[/quote]no connection tracking, fastpath possible - everything much better.
Very nice to see that you actually listen to us!) bridge - reverted bridge BPDU processing back to pre-v6.38 behaviour; (v6.40 will have another separate VLAN-aware bridge implementation);
No problems here. usually problems like this are with policy routing, but policy roluting and fasttrack is mutually exclusive....Unable to open any HTTPS site, unless the fasttrack rule is disabled.
meanwhile, HTTP site is not affected, even if the fasttrack rule is enabled.
is any chance for fix for recent linux breach ?
eg this one:
https://security-tracker.debian.org/tra ... -2017-2636
... in the Linux kernel through 4.10.1...
i did some tests with traffic generator on first board i could find (RB750Gr2) - ~20% increase in max throughput, not bad, not bad at all.fast-forward is an exciting development
... several months later...OK, thx for info. Now i'm trying to break password by brute force. I will write if I find something.
And what does /tool torch or /tool packet-sniffer did show? what kind od traffic was that?All devices was unplugged from routerboard, only routerboard was connected, and routerboard sends about 20 mbps during few hours.
WRONG! Will not work with NAT and it is from 2008. I already asked MT to fix it
Just a guess - did you enable fasttrack?hi guys,
does anyone of you encountered problems in PCC after upgrading their Mikrotik OS?
PCC currently is not working anymore after upgrading . please help.
/system resources cpu shows you per core load(cpu usage ~50%, probably limited to 1 core?)
+1 and consider new RAW feature that allow some traffic to skip conntrack "notrack"
It looks like you could optimise your firewall policies a lot. Are you using jump actions, and are you using FastTrack ?
what winbox loader version are you running?MAJOR issue!!! Log in via winbox, loads new plugins, then acts like its about launch the window then disappears/closes out!! Downgrade back to 6.37.2 and fixed.
GOOD thing I had HTTP/WEB enabled on this one so that I could log in and downgrade!!!