MikroTik

mobilexpi

Hi guys, I hope you're doing well. I have been using CCR2116 with L3HW offloading according to this guide https://help.mikrotik.com/docs/display/ROS/L3+Hardware+Offloading#L3HardwareOffloading-Creatingmultiplebridges and it works fine, but now I need to add a loopback interface to the router, but no...

mobilexpi

Hi guys, I hope you're doing well. I have been trying to Import the OVA image of CHR v7.x and CHR v6.49.7 in my XCP-NG servers, but every time I receive a message saying "Failed to Import". Any idea what could be causing this? I can import images from any image but Mikrotik's CHR. I also t...

mobilexpi

Hi,
What would be the appropriate parameter? I would like to see all the prefixes being received from the IXP interface, they share the same BGP session (since it points to the route servers), but gateway addresses are different for certain prefixes.

Best regards

mobilexpi

Prefix count is dead on ROS v7.8 at least. You cannot verify how many routes a peer sent to you, but you can check how many routes you sent to a remote peer via /routing bgp ad print

Thank you @DarkNate, I hope Mikrotik solves this bug soon

mobilexpi

Anyone from Mikrotik support team?

Best regards,

mobilexpi

Hi guys,
I hope you're doing well. I have upgraded some dozens of CCRs from v6 to v7, they are running fine, but it looks like the prefix count information has been lost (or it changed location).

mobilexpi

Does anyone know if Mikrotik has plans to fix this? I'm in v7.8 and still appears 0 prefix as received. How can you see all the prefixes being received by one BGP session?

Thanks,

mobilexpi

Hi guys, I hope you're doing well. I have been using Wireguard in RouterOS v7 a lot to connect our sites among themselves and it's awesome. However, I haven't found an easy way for our company users to connect via Wireguard VPN. Is there a system that can help me handle VPN users (using wireguard) a...

mobilexpi

Hi,
I hope you're doing well. I have a CCR1072 with v6.47.7 installed and was so frustrated with random reboots. I was wondering if anyone has upgraded their CCR1072 to v7.6 and how it performs. Do you still experience random reboots?

Best regards,

mobilexpi

That's indeed a very good question, I hope someone from Mikrotik can answer it. We are using some CCR2004 for peering at some IXPs und also for our upstream connectivity. So they have to handle multiple full tables (850.000 IPv4 and 150.000 IPv6). I've seen Janis video about the CCR2216 and there it...

mobilexpi

any suggestion?

mobilexpi

Hi guys, I'm looking for a small router that I can use for OOB management, so a USB port is required, 9+ ports are required to connect all devices without using a using to save space (and WiFi is a great plus for internal use hotspot), not sure if there's another option besides these? - RB2011UiAS-2...

mobilexpi

HI IPANetEngineer,
Oh good point. Any idea how could you I find a workaround for this? I tried putting AS12345 (my public ASN) in both Router 1 and Router 2 and establishing a BGP session between AS12345 and AS12345, but it doesn't work apparently.

mobilexpi

Hi guys, I hope you're doing fine. I'm facing an issue with a prefix we give transit to, I have tried remove private AS to my upstream provider but in looking glass I'm still seeing the private AS in the AS-path This is the scenario In Router 1 - BGP session with my upstream provider using our publi...

mobilexpi

Hi,
I am also facing the same problem. Latest iOS version of the MikroTik App and no option to select Romon.

mobilexpi

Hi, I hope you're doing fine, I am not very familiar with Mikrotik CRS devices, so if someone could help me it would be great. One of our customers is connecting his CRS switch to our Arista DCS-7060CX-32S switch and it's creating a unicast flood in our Arista switch, basically all the traffic going...

mobilexpi

Hi guys,
I have watched a video on YouTube showing that the CCR2004 with LACP is unable to route more than 9 Gbps of traffic. I would like to know if there's someone that has tested the routing performance with LACP, and have confirmed if performance is really that limited :'(

Best regards

mobilexpi

Hi, The strange thing is that with a CCR1036 I can apply up to 3 Gbps queues without issues and with less than 50% cpu usage, so the ccr1036 probably supports 6 Gbps queues without issues, but the CCR1072 can't handle 1 Gbps queues Well, 500Mbit/s is quite a bandwidth to queue, shape or police. PPPo...

mobilexpi

Hi Alferez,
We are facing the same issue. Were you able to fix it?

Thanks,

Hi, we have a CCR1072 in our CORE and it has become unstable.
...

mobilexpi

We also noticed the same issue, a serious one

mobilexpi

Thank you shaorarch!

mobilexpi

Hi guys, I have an array of routers doing OSPF among them. Unfortunately from the main Router to one of the secondary OSPF routers (connected via 2 wirelesss links) I have congestion in only one link (or actually links with many hops). Is there a way to force certain subnet to be advertised from one...

mobilexpi

Thank you changeip!

mobilexpi

Any idea?

Thanks,

mobilexpi

Hi guys, I am trying to show the entire list of IP routes coming from the gateway 192.168.244.2, the command works, but it only shows 20 results at the time, if I want to show more I have to press the D button, but it takes forever.... is there a command for print to show ALL the results at once? [m...

mobilexpi

Hi guys,
I have some BGP peers and some of those aren't IP transit but a local IXP, I would like to know how can I "tag" the prefixes and advertise only those prefixes (the ones from a specific BGP peer) to another BGP peer? Is bgp communities the right way to do this?

Thanks,

mobilexpi

Hi guys,
Is there any update about TR-069 support in RouterOS?

mobilexpi

@ropeba
Did you find any solution for this? I'm having the same issue.

mobilexpi

Hi,
I have an EoIP tunnel, but I also have enabled IGMP snooping into the Router.

mobilexpi

Hi guys, I have an IPTV service (with multiple STBs) in my house and I want to use my internet connection (200Mbps/200Mbps) to create an EoIP tunnel in order to watch TV from my mom's house (200Mbps/50Mbps internet pipe) using the other end of the EoIP tunnel. I was able to make it work and I can wa...

mobilexpi

Hi guys, I have been trying to install RouterOS 6.36 in a Dell R710 with Dual CPU. I was able to boot from the CD, but the RouterOS installer isn't able to find any hard disk drive. I tried configuring the drive in RAID 0, then in RAID 1, then directly connected to the SATA port and in all cases the...

mobilexpi

Hi, I want to connect an CCR1036-8G-2S+ (2 SFP+ ports + 8GE) to a CCR1009-8G-1S-1S+ (1 SFP+, 1 SFP, 8GE), the idea is to use the SFP+ ports to connect them at 10Gbps-Full, but I also would like to have some redundancy, so I would like to use the SFP (and if possible to use 1 SFP and 1 GE even better...

mobilexpi

The thing is that I really wouldn't like to use a virtualized router as our main core router.

mobilexpi

Hi guys, I've been trying to install Router OS 6.35 on one of my Dell Servers R710, unfortunately the installer doesn't recognize the hard drive. I tried with (disks on RAID and without RAID config) the H700 RAID card and nothing, also tried with the PERC 6/i RAID card and nothing, and finally tried...

mobilexpi

Hi guys,
I tried to install Router OS 6.35 on one of my Dell R710 with H700 RAID card but the Router OS installer said that there's no HDD found and I have 4 HDDs on that machine, what could be wrong?

mobilexpi

Hi guys,
I would like to know if Router OS 6.3x x86 installed on a Xeon Server can use multiple cores for BGP, or it is like CCR which are limited to single core BGP?

Thanks,

mobilexpi

no one?

mobilexpi

Anyone?

mobilexpi

Hi guys, We have bought a 2U Dell Server with 4 Dual 10Gbps ports and we would like to install RouterOS or CHR on it in order to overcome the BGP limitations of our CCR1036. We are not going to install anything else on this server to make sure it has all the power available to handle our multigigabi...

mobilexpi

Hi guys, My network was victim of a DDoS attack, fortunately the target was a router which don't require a static IP, so I was able to "solve the issue" replacing the IP address. However, I would like to be prepared better if this happens next time. I'm running BGP and have firewall implem...

mobilexpi

Hi guys,
Any idea about this issue?

mobilexpi

Hi guys,
Any idea?

mobilexpi

Hi guys,
I would like to know if it's possible to do bonding with assymetric links. One link is 100Mbps and the other is 30Mbps. The idea is to bond the links and get higher L2 performance cause my network is bridged.

Thanks

mobilexpi

Hi guys, I'm helping a friend of mine to configure his router. He wants to configure a RB750 with 4 DHCP Servers, with independent IP ranges for each port, expect the WAN port. He already did that, but now the second part is to configure 4 DHCP Clients (with one IP to be masquerade for each LAN port...

mobilexpi

Hi, I've a question, according to my knowledge it shouldn't be possible; however I would like to ask in case there's another way to do it that I haven't thought. I've a 10Mbps fiber connection with fixed public IP addresses in one office and I would like to assign some of those addresses to another ...

mobilexpi

Hi, I've a RB450G running User Manager (DHCP authentication via MAC address), the network is: 192.168.4.0/22, and router's IP is 192.168.7.1/22. DHCP's pool is 192.168.4.10 to 192.168.6.250 and directions within range 192.168.7.1-192.168.7.254 are reserved for network devices like Mikrotik and Acces...

mobilexpi

Hi kirkian, I will try with prerouting instead of postrouting, I hope it works :) About the QoS, I use the NetworkPRO article (check Mikrotik Wiki) for QoS, I've applied rules for HTTP, VOIP, DNS, P2P, etc...and looks like they work...but not individually, just for the whole network, latency problem...

mobilexpi

Hello, Thank you for your help. I've removed the Simple queues. I've created two mangle rules: Add chain=forward src-address-list=basic_client_list action=mark-connection / new-connection-mark=basic_client_conn passthrough=yes Add chain=forward connection-mark=basic_client_conn action=mark packet / ...

mobilexpi

Hello, I'm implementing QoS on my RB450G, I've a 8Mbps pipe and I want to serve 16 clients. I've used NetworkPRO tutotial and looks like it works fine when I've multiple clients (example, when I set maximum bandwidth to 200Kbps, and I use 180Kbps in one client, the second client has a good latency)....

mobilexpi

Hello,
I've a RB750, and I want to configure the router to act as a RADIUS server in order to serve a Rocket M5 (AP WDS mode) and clients NanoM5 (in Station WDS mode). Using WPA-AES TTLS or PEAP.
Any one know if it's possible with a RB750? In case of being possible, any idea how to do it?

Thanks

mobilexpi

Hello guys,
I want to know how to implement rx and tx burst when using PPPoE server. I have read some old topics, but had no luck. I tried modifying the "rate-limit" in /ppp profile set rate-limit=, but I don't know which argument here.

Any idea?

Thank you

mobilexpi

I want that when a wireless client connects to the network the mikrotik router assigns a specific ip (not a static one, just an ip from a range for example 192.168.60.x) based on the mac address of this client. And when another client (member or another group of users) connects to the network will r...

mobilexpi

Any idea how to do that?

Thanks

mobilexpi

Hello,
I understand, but can I bind a specific MAC address to a single IP (but dynamically assigned via DHCP) in an specific IP pool (not the whole ip pool)?

Thank you

mobilexpi

Hello, I've a RB450G and I configured a DHCP server (192.168.60.1 is the gateway IP) using first IP pool, Pool 1, (192.168.60.10-.150, with next_pool pool 2), Pool 2 (192.168.70.10-.150, with next_pool pool3) and Pool 3 (192.168.80.10-.150). Now I want to assign specific users to specific pools. I r...

mobilexpi

Hello, I was reading the manual in leases, thank you. Now I have another problem, I can't create more than one DHCP server associated to one port (in my case bridge). My idea is to connect the RB450g to my ubiquiti bullet m2hp using one cable, and that different types of users connect to the same AP...

mobilexpi

Hello guys, I've a RB450G with 1 cable 8/1mbps connection. I want to have three kind of users 512Kbps, 1mbps and 2mbps. My idea is to use ip range 192.168.50.x - 512k users, 192.168.60.x - 1mbps users, and 192.168.70.1 - 2mbps users. I am going to create 3 DHCP servers, each one with the described p...

mobilexpi

Hi chupaka
I was asking if anyone else test the sharedband service. And if anyone know how it works?
Will you go to the Mum Argentina?

Best regards

mobilexpi

Hola,
parece que se habla harto español por acá.
Y saben como lo hará sharedband para lograr tal eficiencia?

Saludos

mobilexpi

Hi Daniel,
i understand it. Actually I was thinking of rent a 10mbps unmetered at iWeb.com. Now my question is how to implement it like the sharedband service (in a reliable way without packet loss and with full redundancy).
Best regards

mobilexpi

Wow. It's really an expensive solution for the datacenter. My problem is that I live in Chile, and the sharedband service is only available in the us and the uk.
Do you know other solution for (low cost and that works fine) bonding over IP?

Best regards,

Salvador

mobilexpi

Ouch! EoIP have a lot of problems then. And is there anotherbway to do an effective bonding solution? (with asymetric links)

I was seeing the sharedband.com (do you know it?) and I think that its only EoIP.

mobilexpi

Hello, I want to know if my idea is possible. Is is possible to install mikrotik in a dedicated server (on a $39/month datacenter) and configure my RB450 to bond three ADSL lines (1M/512K) to get a 3M/1.5M link...could it work?? I was thinking is a VPN with bonding, will it be the best way to do tha...

mobilexpi

Wow...you reply really fast, thanks
OK, I will look for a recommended card in the link.
Another question, is there a way to reduce the CPU usage of the proxy, because with only one computer behind the mikrotik sometimes the CPU runs near 100% when I'm using the web proxy.

Best regards

mobilexpi

Hello Normis,
thanknyou for you reply. Why microSD instead of SD card? Any special recommendation lije a specific brand or model?

My idea is to have a 8 or 16gb proxy.
Thank you
best regards

mobilexpi

And Can I connect a HDD to my RB450G?? I think no...right?

mobilexpi

Hello,
I've a RB450G and I enable the WebProxy, and I've two questions:
-Can I install a 16GB SD card on it?
-How many concurrent users can manage the RB450G's web proxy?

Because I'm using only one PC for testing, and sometimes when I use the webproxy the CPU load is near 100%.

Best regards

mobilexpi

It works!!!
Thank you very much

mobilexpi

Hello guys, I'm new in the Mikrotik World. I've a RB450G, it works...but the built-in DNS server doesn't. When I use the mikrotik DNS (192.168.50.1, the mikrotik local IP) my computer can't resolve the addresses (but I can do ping from my pc), if I don't select DNS server in DHCP Server my computer ...

mobilexpi

normis:
I want to know if is it possible to install Mikrotik on a Virtual Private Server (in a datacenter) and then bond both links between my RB450G and the mikrotik virtualized?

Do you understand my idea?
Thanks

mobilexpi

You can check it http://www.loadbalancers.co.uk/technolo ... onding.asp.

Thanks

mobilexpi

My idea is to use a VPS on a datacenter.
Is VPN bonding a better idea?

mobilexpi

I know that load balacing only gives me 3*1Mbps, but don't 3Mbps single downloading.
I was thinking of bonding or VPN bonding.

mobilexpi

Hello, In my area fiber connection is ultra expensive, and there aren't good simmetrical internet connections for home users. Then, my idea is to install Mikrotik on a VPS@imountain and use my existing RB450 (at my home) which I connected to 2 adsl (1024/512K each one) connections and 1 cable (4M/51...

mobilexpi

No, I reset the configuration and I only have:
-1 dhcp client
-nat masquerade
-dhcp server

mobilexpi

I think that the new version maybe fix some bugs.
I found another fact, the crash time is not 5minutes, it moves between 1 minute (downloading 4 big files and 10minutes if the connection is Idle).
Maybe a hardware failure??

Best regards

mobilexpi

Hello, I've a RB450 with Mikrotik it was working fine, but now I did a upgrade to the latest version and the device start working strange (the ping from PC to Internet and mikrotik only work for aprox. 4-5minutes, after this time the system crash and I need to reset manually) I try with reset-config...

mobilexpi

With my ADSL connection I've near 100% of the max speed (national bandwidth,international bandwidth an average of 50%)....
Then can I carry 10 G729 (20ms payload) calls with my ADSL connection? or you really consider that it's no way.

Thanks

Best regards

mobilexpi

I was reading that G729 only uses near 40Kbps per call, and if I've 512Kbps upstream, can I manage up to 10 simultaneous calls??

Best regards

mobilexpi

Hello I'm installing a small WISP and I want to offer Internet 1Mbps and IP Telephony to my customers. I've 2 Internet connections one ADSL (1Mbps/512Kbps) and one cable (4Mbps/512Kbps) the idea is provide 512K internet plans. Now my question is: how can I use the cable connection (4Mbps/512Kbps) on...

mobilexpi

Where can I buy a 24dBi rootenna?
Is it very weight?

mobilexpi

Hello RK, Thanks for the reply. The only problem using Nstreme is that my CPE must be Mikrotik (instead of Ubiquiti PS5 w/integrated 22dB antenna) and the cost is higher PS5=159USD and Mikrotik CPE (RB433+XR5+22dB antenna) that is a total cost of near 300USD. Can I run Mikrotik over PS5?? Best regards

mobilexpi

Hello, I'm making a wireless link (2 pt2pt links and 1 Mpt2pt one). The idea is send internet signal from a 30km town to a tower in a hill (in the town I'll have a Ubiquiti PS5 22db) and I'll make a Pt2Pt link to the hill (RB433 w/3 radios, I'll use a Ubiquiti SR5 for this link) then from the RB433 ...

mobilexpi

...Same here (*EDIT) /ip route add gateway=xxx.xxx.xxx.xxx interface=ether2 routing-mark=ether2out add gateway=yyy.yyy.yyy.yyy interface=ether1 *EDIT: Changed gateway from gateway=ether1 to the IP. The previous assignment did NOT always find the gateway. I can't modify the routes, because it's auto...

mobilexpi

Hello: I want to create a load balancing application (including backup if one of both connection is down). I follow the how to http://wiki.mikrotik.com/wiki/Improved_Load_Balancing_over_Multiple_Gateways, but when I try to follow this step I've problems "NAT / ip firewall nat add chain=srcnat c...

mobilexpi

I'm not asking for the DHCP server, I need to add multiple IPs from a DHCP Server (act as a DHCP clients) using multiple MACs.

mobilexpi

Anyone know the answer?
Thanks,

Best regards

mobilexpi

Any idea? or the post is not clear? (because english isn't my primary language).
Thanks

mobilexpi

Hello guys, I've a Cable Internet connection and my ISP offers me 5 public IP addresses, but the IPs are offered by DHCP and they're not 100% fixed IP (because they change if I don't use it for more than 3 days). The problem is that the mac is associated to a MAC address, and when I try to add other...

mobilexpi

OK, thanks.
Another question, what type of load balancing is better for my network, because before I've a Hotbrick Router loadbalacing, but I've a lot of problems with downloading, Messenger disconnections and problems like these.

Best regards

mobilexpi

Can I use bonding to "bond" two internet connections?
Thanks

mobilexpi

Hello, I'm trying to create a load balance solution for my home office, I read the wiki (http://wiki.mikrotik.com/wiki/Improved_Load_Balancing_over_Multiple_Gateways) but when I put the code: [admin@Router] /ip firewall mangle> add chain=prerouting in-interface=LAN1 connection-state=new nth= 1,1,0 \...

mobilexpi

Resize a connection (4096/512Kbps) to a 512Kbps/512Kbps for a server in the network, and use the residuary (download speed) to add this bandwidth to the ADSL connection??
Is more clear my question??

Best regards

mobilexpi

Thank you. I thought that if I use separate VLAN I can increase security (of the voice) and allow a better sound.

Best regards

mobilexpi

Hello:
I've 2 internet connections, one Cable (4Mbps/512Kbps) and another ADSL (1Mbps/512Kbps, but with dynamic IP).
Can I do these configuration
-use 512K/512K of the cable for Server1
-use the ADSL for NAT and add only the download speed (3.5Mbps) of the Cable, not using the cable upload?

Thanks

mobilexpi

I add the IP address to the "Address List", now I go to Firewall, and create a New Firewall Rule, in Chain only appear input, output and forward, should I select "forward"?? I attach the screenshot of what I see. Thanks, Best regards, http://img530.imageshack.us/img530/6413/ssmik...

mobilexpi

It works!!

the problem was in the Route List.

mobilexpi

The IP address is based on the MAC address. Is possible to create a virtual NIC adapter (in the same NIC card)?

Best regards,

mobilexpi

I'm in the first step (adding IPs), but I found a problem, when I'm trying to enter the second IP (assigned via DHCP) the Mikrotik send me an error "Couldn't add New DHCP Client -dhcp-client on that interface already exists" (I attach the screenshot) http://img385.imageshack.us/img385/7082...

mobilexpi

Hello: I'm creating a small community network in Ecuador (South America), the idea is offer Internet (only internet), and internet+voip (to intercommunicate the families), but for QoS, I was thinking in use a CPE with VLAN supports, for transfer all the voice conversations via the VLAN #1, and the d...

mobilexpi

Hello guys: I've a nice RouterBoard Mikrotik in the office and it works fine, but I've a question. My ISP (cable) offers me 2 public IP (they're static IP but offered by DHCP), and I want to use 1 public IP for NAT (office's PCs) and the other public one in a server (Asterisk), but I want to offer t...

mobilexpi

Can you redirect in Asterisk only the trunk via the public IP, and the local calls via the ethernet card 2, with private IP?

Best regards,

mobilexpi

Hello: I'm installing Mikrotik in our small office, and I want to know if is possible to do this..(I attach the picture, that explain it better than words :)) http://img146.imageshack.us/img146/451/diagramaasteriskopticbw6.th.jpg http://img146.imageshack.us/images/thpix.gif The idea is, use the IP a...

mobilexpi

OK, I understand, thank you.

mobilexpi

Hello: I've a mikrotik router on a X86 computer, in the office we buy 256 IP addresses (from a Russian Provider) they will send it including an AS number. Now my question is, I need to offer some of our addresses to computer outside the office, I think in a VPN server, BUT I need to only offer the I...

mobilexpi

Hello JP: Great, I've another question..I don't know if you tested Citrix XEN (it load very fast) but I need to configure the Virtualization module, I need to copy and run some files, but I can't find the LINUX console in Mikrotik to do steps 1,2 and 3. the system help said that: "Note that you...

mobilexpi

Hello: I'm trying to install 2 OS in a AMD 64 x2 "server", one is Mikrotik to act as the Router office and the other is Trixbox (Asterisk) for IP PBX. I run XEN (over CentOS) but I only can install Mikrotik in FULL virtualization mode, is possible to install Mikrotik in paravirtualization ...

mobilexpi

Hello: I have a problem, I'm trying balancing 2 internet connection, with the same ISP, it's a bit difficult to explicate it. I have 2 internet connections (two mac enable in my ISP), and 1 cablemodem, when I put a switch between the CableModem and the Router I can't do anything, except open MSN Mes...

mobilexpi

Thanks. Any problem if it the same ISP with the same gateway?

mobilexpi

Hello,
Can I use Load balancing with 4 network interfaces each with 512Kbps, with the same ISP?
Thanks

mobilexpi

Thanks a lot nhalachev, I read the other post w/your example. I follow it, but I've problems :( . I change some config. The new range of the PPPoE connections (Basic=128Kbps/64Kbps) is 192.168.0.80-192.168.0.96 =(/28) The new range of the PPPoE connections (Light=64Kbps/32Kbps) is 192.168.0.100-192....

mobilexpi

I create PCQ rules but, I can't separate the 64Kbps/32Kbps PPPoE users to the 128Kbps/64kbps in the Queue Tree. Ip range of 128Kbps/64Kbps=192.168.0.160-192.168.0.224 (via Ip Pool) Ip range of 64/32Kbps=192.168.0.230-246 (via Ip Pool) Then I create 2 profiles in the PPP Profiles ("prof-128"...

mobilexpi

Hello, I need limit the Bandwidth of my clients...I've a 512Kbps/256Kbps line, and I want to offer connections of 128Kbps/64Kbps and 64/32Kbps, but I don't know how setup it. I create a Simple Queue with "interface=pppoe-user1", It works good, but when the client logout the simple queue cl...

mobilexpi

OK! But I can't activate the default-forwarding for my ethernet NIC, I only can activate on a Wireless interface, and I have a problem, I'm serving wired and wireless clients (with a D-Link 900AP+ Access Point). My configuration is: LAN=192.168.0.1/24 WAN=xxx.xxx.xxx.xxx The range of the PPPoE conce...

mobilexpi

Hello, I'm newbie in Mikrotik..I'm creating a small Wireless ISP in my community. I can configure the PPPoE Server, and I'm setting the queues for the clients. But I've a problem, the computers (in my network) can see among in the Network Neighborhood (Windows XP) how can I avoid it? Thank you Salva...

Search found 115 matches