Nope. See viewtopic.php?t=190932 - there is workaround to use bridge hosts there, maybe that be a workaround.

Thanks a lot!
This can not solve my problem, but this topic is about the issue I also have.

Hi All, Does anybody have any (good) news regarding this issue? I have the same issue with my ac^3, all wireless interface statistics are gone. But not all my devies are affected by this, for example hAP lite is working fine. I think (suspect) only the newer devies have this bug, which are using &qu...

Hi All, I have a question about SNMP. I have some Mikrotik devices, and I use Grafana + SNMP Exporter to show some Graphs. I have just notified that my hAP ac^3 router does not provide oids for wifi registration table. :( Is it a bug? Firmware version: [admin@MikroTikAc3] > /system/routerboard/print...

Hi, I don't fully understand your desired setup. But I think I have some similar connectivity. I'm using WG to connect Mikrotik Routers and linux servers to connect each other. The most importatnt that I have a VPS Debian Server with FIX IP Address. This is my WG "server". My WG subnet is:...

This part of suggested configuration did not worked: /interface bridge vlan add bridge=bridge tagged=bridge,ether1,wlan1 vlan-ids=10 add bridge=bridge tagged=ether1,wlan3 vlan-ids=20 What is the point behind adding WLAN* interface as tagged? If I understand well, tagging interface means that the in...

Hi All, I want to share my experiences. It seems I managed to successfully configure the VLANs according to suggestions. There was some modification, and first I used a "test" router (hAP) as R3. This is because R3 is far away from me and I did not want to walk from one building to another...

Hi All,
Thank you very much for the suggestions.
I'm going to try it and come back with the result.
Br,
JVincze84

If the question was for me - if R1 presents 192.168.1.0/24 and the path to the PPPoE server on the same physical interface, then indeed the PPPoE client has to be connected to the VLAN interface on the common bridge. If there are two separate interfaces on R1, one for LAN and another one for the PP...

I think the above would be unnecessarily complicated. I would set the master wireless interface of R3 to station-bridge mode, make it a trunk port for multiple VLANs, and use the "single common bridge with vlan-filtering=yes for all VLANs" mode also on R2, so that its WAN would be yet ano...

I was thinking about a something like this:
Create MACVLAN interface on R2-ETH1. (ETH1 connected to R1)
Create EOIP tunnel between R2 and R3.
Bridge EOIP and MACVLAN on R2.
Bridge EOIP and WiFi Slave on R3. And set up Dhcp Relay on the brige interface.

Dear All, I have a interesting (interesting for me) question. I got a Router from my ISP (Telekom HU), call it R1, and two Mikrotik: HAP Ac3 (R2) and a Hap lite (R3). R1 has its own network: 192.168.1.1/24. Android TV boxes are connected to this network via WiFi. R2 connects to the internet via the ...

Hi All, I need some help with my RBwAPR-2nD (wAP R) wifi settings. After I have successfully updated to the latest version, there are multiple wireless settings in the interface section. [admin@MikroTik] /interface/wifi> /system/routerboard/print routerboard: yes board-name: wAP R model: RBwAPR-2nD ...