MikroTik

fbaffoni

4.5 will add that feature. writing on wiki what configuration will be needed to make that work. here is how it is done: http://wiki.mikrotik.com/wiki/IGMP-Proxy#Static_multicast_forwarding_cache_.28MFC.29_entries @janisk I'm trying to set this up in my Mikrotik, I have to transport a simple SPTS ov...

fbaffoni

Someone?.... Mk team maybe, can you help me?

Thanks
Regards
Fabián

fbaffoni

Hi everybody, I write because I'm having an issue with facebook. I got a little ISP with some users, and I'm getting complaints because some Facebook pictures on the feed are not been shown. I made a research, try different configurations, change DNS, and nothing happens. Finally I took away the MK,...

fbaffoni

Code: Select all
/system script job print

Thank you,

Now with the new scheduled interval works fine, and everything is OK.

fbaffoni

Thank you, I imagined that something like that could be the cause.

I will check that you mention

fbaffoni

SOLVED!!!!

If you use a short time interval in the sheduler to ejecute the script, I don't know why.. but RouterOS stop solving DNS over CLI.

You have to use a schedule time over 1 minute.

Thanks to me!

fbaffoni

Can you paste your script? I am no scripting expert but I will try to look at it.

Is not a script problem.

If I open a new terminal and try to ping www.google.com, doesn't work.

fbaffoni

Does the ping work initially? Have you setup DNS in /ip dns?

Yes, at the beginning works fine for a few minutes. The DNS are configured.

If I reboot the routerboard it work again for a while.

fbaffoni

Hi, I recently deployed a hotspot system in a small village. The HW used is Routerboard 1200. The configuration is simple: 2 ISP, 1 Hospot interface, in this interfase is connected a Rocket M2. I made a script that check the status of both connections /ping www.google.com interfase=Ether_ISP1 count=...

fbaffoni

The chipset h67 is not supported.. Do you know when will be supported?

Is the H55 supported? and what about the H61?

fbaffoni

NO COMMENTS???

No one are using version 5 of MK in a x86 system?

fbaffoni

Hi there, I got a lot of problems with new hardware to install RouterOS 5.12v, I created a ticket at support, but the problem is not resolved. I listed my hardware in the wiki supported hardware ASUS P8H67-V (Intel® H67(B3), 3xPCI, 4xPCI-E) 5.XX Don't work. "Kernel Panic". Mikrotik has not...

fbaffoni

Do you have 2 or more IPs on the Datacenter router? What type of VPNs are you using? You don't need packet marking to do this. You simply add a static route via the interface you want for each destination IP. So each VPN/Tunnel goes via a specific interface. I used EoIP over L2TP on the DSL setup I...

fbaffoni

I forgot to mention that the exact same setup with DSL instead of 3G works perfect. What is your setup 2 EoIP and bonding? 2 VPN and bonding? I'm doing it with mangle and packet mark and I can see how the packets are well marked and redirected to the specified default gateway, but just one stream g...

fbaffoni

I'm working in the same project. With two 3G Modems, without using EoIP or VPN tunneling. I'm marking the half of the packets and routing them through one modem 3g, and the other half through the other modem 3g. To do this, I redirect all the traffic that comes with SRCAdd:XXX.XXX.XXX.XXX:554 to DST...

fbaffoni

It seems that you misunderstood my previous post. In your mangle rules you mark every second packet so you lost 50% of packets. add action=mark-packet chain=prerouting disabled=no in-interface=ether5 \ new-packet-mark=AAA nth=2,1 passthrough=yes In mangle rules you should mark packet according to y...

fbaffoni

Ok, I solved the router problem and now the packets arrive my PC. I can see the video but very bad. I was analizing the arrived packets, and I saw that the 50% of the packets are lost. So, studing this, I discovered that the mikrotik is not masquerading the packets in the right way. All the packets ...

fbaffoni

Read about Policy Routing: http://wiki.mikrotik.com/wiki/Manual:PCC#Policy_routing Mark packets according to your needs and send them through WAN1 or WAN2. HTH, Ditonet, thank you for your answer. I already read that, and this don't work for me, becouse that is PCC (Per Conection Classifier), that ...

fbaffoni

Any Idea?

Mikrotik People, have you got any idea?

fbaffoni

Hi, I read a lot of post of load balancing using PCC, NHT and many other metods. I would like to know if using NHT, could I to multiplex packets through different gateways? This is what I need to do: ................. |----[WAN1]----| [PC1]----------| ................. |-----[WAN3]-----[PC2] ..........

fbaffoni

I would recommend to run, - format-nand; - reinstall the router with the latest Netinstall and MikroTik RouterOS 4.10; Return RouterBOARD to the warranty, if nothing helps. Yes, I already format nand, and reinstall the router. But this did't solve the problem. Even I do a memory test, and the resul...

fbaffoni

No, just one Beep.

fbaffoni

The version is v4.10 The firmware version that Im trying to install is v4.2. After 1.30 hs installing, this is the message that appears when the routerboard try to boot "RouterBOOT booter 2.25 RouterBoard 433AH CPU frequency: 680 MHz Memory size: 128 MB Press any key within 2 seconds to enter s...

fbaffoni

Yes, I did tryed, and did't work. Another Idea?

fbaffoni

How could we fix it? I spent a lot of money in this device. I need to fix it!.

Please Mikrotik Team involve in this issue, and help us.

Thank You

fbaffoni

Anybody? Mikrotik People, any update?

fbaffoni

Hi, I recently made a wireless network that connect 120 street video cameras. Using RB433AH as AP with two XR5 and Nanostation5 as CPE. In my study I found that the CPE lost packets, his queue overflow and begins to drop packets. I would like to know if Mikrotik has any tool or command to know if th...

fbaffoni

Yes I tried, with those versions and did't work. I will try to find another old version of netinstall.

Thank you

fbaffoni

How did you fixed? I got the same problem.

fbaffoni

How did you create the SMS Notification? How you do it?

fbaffoni

Any Update about this?

Mikrotik people?

I will appreciatte any clue. Thank You

fbaffoni

Hi, Im in the middle of a video survilance project, this is my network layout: (AP RB433AH with ROS4.2v) -------- 5.8Ghz, 802.11a -----> <-----(STA Ubiquiti NanoStation5)------- (UDP - Camera) There is a bridge between wlan and eth of the RB433AH, the STA is configured as bridge too. All the network...

fbaffoni

any update?

it is better to call on +91-953750022 for the same

????

fbaffoni

It's possible to install VLC in a RB433AH, and still using that RB as AP?

this is a short graffic of what i wanna do

(Unicast Stream Video) --Wireless--> (AP RB433AH With VLC)--UTP Multicast streaming---> (Wired PC1..2...n)

Anyone has tryed?

Is possible to do this?

fbaffoni

any update?

fbaffoni

There are a few updated papers on Sam Leffler's Atheros hardware assisted TDMA implementation. They are a very interesting read, and something I hope we will see on RouterOS at some point in the future. http://people.freebsd.org/~sam/FreeBSD_ ... 090921.pdf http://people.freebsd.org/~sam/TDMAPres ....

fbaffoni

I'm confused, I read a lot of threads and a lot of information about RTS and CTS implementations but there is something that miss my imagination. RTS/CTS shoud be configured in CPE only, or in CPE and AP? I think that is I only enable it in the CPE... well, how the AP know that he has to respond a C...

fbaffoni

Have you tell me the number of the RFC?

I can't get it.

Another thing that could be happening, is the effect of Hidden node, I read in some post that this could be fixed using RTS/CTS protection mode.

I will try so.

Thank you

fbaffoni

Never post the results...

Is the RTS/CTS working now? In the last versions?

Thank YOU

fbaffoni

Yes, I alrready read it, and considerations was taken in mind using that paper.

Now I am working with the Ubiquiti People, seems to be a firmware problem.

fbaffoni

Did you solve your problem?

fbaffoni

Thank you, I'll try that option.

fbaffoni

I am having the same problem as you. And don't get any answer from Mikrotik Team.

Did you find te way to fix it or something close?

Thank you.

Fabian

fbaffoni

I got the same problem.

Mikrotik people.... when do you think that you are going to support PGM or some multicast protocol to solve the UDP problems over Wireless?. That could be a good solution.

fbaffoni

Sophal What are you talking about?

Sorry but i did´t understand what you try to tell me.

fbaffoni

Anyone? Mikrotik People... what do you think?.... some idea?

I will appreciate some opinion.

fbaffoni

Hi everyone, I am in a middle of a project where i have to connect many security cammeras (CCTV) through Wireless and Fiber Optic network. Everything will be transparent (Bridged), and I need to priorize the PTZ traffic (Traffic from the joystick to move the cammera (TCP)) over the UDP video traffic...

fbaffoni

I don't wanna see the characters that I type. I have to connect an external device that send commands to mikrotik over RS232, but first I have to disable de echo that Mikrotik do.

Any idea?

fbaffoni

Does enyone know about this? What about the Mikrotik Team, anyone can help me?

Thank You. I'll wait your reply.

fbaffoni

Hi everyone,

I'm wondering if there are a way to supress the echo of the RS232?.
Maybe the Mikrotik people know a command or some procedure to deactivate the echo on this port.

I will appreciate your answer. Thank You

fbaffoni

Hello people: I am looking for a wireless minipci card, to use in a wireless project with RouterBoard 433AH, that support the range of frequencies 4870-4950 Mhz. I was searching in the Ubiquiti Web page, and they say that have one minipci wireless card working in 4.4-4.9 Ghz, but in the datasheet th...

fbaffoni

Hi People: One question, I got one server with the version 3.13, just using it as a Hotspot Access Controller. And the CPU is between 7 and 20 %, the amount of clients is 3 or 4. As you could see, the CPU usage is too high for that amount of clients. I have another server with Mikrotik RouterOS vers...

fbaffoni

Hi People:
I have just one simple question:

The only way to do a One to One NAT is using IP Binding?

Thank You

fbaffoni

Well that will be greate!

But don't know if is possible to do it with UM? I need to do it soon as possible.

Thank you for your answer.

fbaffoni

Hi everybody:

I need to put in the vouchers a timestamp. I tried using Java, but it did't work. My client need to have a control of when the voucher was printed, the date and hour. Someone did do it?

How could i do this? Any Ideas?

fbaffoni

Is possible to use a PPPoE server, in the same interface where is the hotspot working? (if its possible, i could give to the clients who want public IP, a PPPoE connection, with a public IP, and this could solve my problem). I was reading in Mikrotik Refman, that for security reasons is not recommen...

fbaffoni

Sarpkaya:

Thank your answer.
Supose that my WAN is on ether1, with one public IP, should i assign to this ether1 all my pool of public IP? to be redirected thtough dst-nat?

fbaffoni

Yes, that could be a solution, but, evry time that i create a new client, i have to configure in mikrotik the specific NAT rule. If User Manager, has the posibility to asign a fixed IP address, just filling the "Fixed IP" field, this could be more easy for my operator. He just create a use...

fbaffoni

Ashish and Omega: Thank you for your response. I have to still using private IP becouse I don't have a big pool of public IP. So i need a mix public and privates I am just masquering the privates IP (10.40.0.0/19). Now for testing configurations, I made a small LAN, this is the configuration of the ...

fbaffoni

Hi: I was reading this forum looking for a solution to use Public IP in a hotspot, I saw a few peoples that ask the same thing as me, but I did't see a direct answer to do this. That is Why I post a new topic to see if somebody can help me. This is the scenario: I got a Hotspot, running in 2.4 Ghz, ...

fbaffoni

Thank you for your response!. I will try the software you said me!.

fbaffoni

Hello:

Does somebody know any provisioning software to manage and control a CMTS?

I am looking for something like Radius Manager, but to be used with a CMTS.

I was "googling" but all software I find works under Windows, I am looking one that works on Linux.

Thank You

Fabian

fbaffoni

Chupaka Thank you for your response. My phone company just made the billing, discount the credit from the user and control if the client has credit to achieve have access to one username/password. But the control of MySQL databases, is my job, the cellphone company jusr realy all the sms's comming f...

fbaffoni

Chepix, yes of course, the cell phone company made the billing stuff.

But I can't found information about how to deploy this. I hope somebody of here can help me!

fbaffoni

Hello People: I have working a few hotspots in Argentina, and I would like to add a new method to sold WiFi access to my clients. I want to show in the hotspot login page a text with information about how to buy credit through the cellphone. This is the idea: Client send SMS to one number with the a...

fbaffoni

Yes, through that way will work, becouse the Wlan Mac, will be masquered with the LAN Mac. But, I will not use the lan side, becouse I needing a complete wireless solution, just one core router will be connected through the lan. This is the idea Internet(ethx)-----AP1(core router) - - - - (wireless)...

fbaffoni

Sparkaya

I understund your point, but 2 AP, connected in the same LAN, with the same MAC address, will cause colissions at layer 2 level. It´s the same thing if you configure 2 PC with the same IP Address. That is the problem becouse you can't use the same MAC address for the AP.

fbaffoni

Ok Uldis, thank you, i will test it.

Thank for your time men.

fbaffoni

Uldis

You say that i will loose some frames that will not affect the VoIP communications ustin RSTP or using L2-Mesh?

Thank you for your response

fbaffoni

Normis

What do you mean with properly configured?

1)using RSTP?
2) using Layer2-Mesh?
3) using WDS-SLAVE?
4) Usint station-wds?

What do you think that "the properly configured" would be?

Thank you, i will wait for your answer

fbaffoni

I don´t think that you say work. Will be colisions at layer 2 level, and that will be a problem.

I know that 802.11r is the solution, but i don´t know if mikrotik support that.

fbaffoni

Hi, people. I have to make a new wireless wi-fi network in a city, this network should guarantee roaming for the clients. So, my idea is to use one AP and WDS distributing the signal all over the city. I know that mikrotik support this implementation of the 802.11 standar. But is Mikrotik capable to...

fbaffoni

Hi! I recently wrote a wiki where explaind how to use netwatch to make a secure failover when we have 2 ISP one that give us Fixed IP address and anotherone who provide us with Dynamic IP. I made the document in spanish this is the url http://wiki.mikrotik.com/wiki/Filover_con_Netwatch_III How could...

fbaffoni

Hi people, Mikrotik support wireless Mini PCI cards Full Duplex, to make P2P wireless links? I got wireless links working full duplex with Nstreme Dual, but i can´t use Wmm with this configuration. So my idea is to use miniPCI wireless full duplex card's, but in the RouterOS i dont see that posibili...

fbaffoni

What about the M3P protocol, to give QoS? work with Nstreme Dual, in bridged networks?

Someone test it? How is working?

Thank You

fbaffoni

Another thing.

The rebuild command, what it does?

I was browsing the wiki, and don't talk about that command.

Thank You.

fbaffoni

Hi: I am using a Hotspot with User-manager radius autentication in a Hotel. Recently i had to restore a backup file, then, I did access the userman webpage, and all my database was't there. Why is this happening?. (this make too much problems with my client). Every time that i restore a backup file,...

fbaffoni

Normis:

Could we change the web pages of user manager in version 3.8?
And, what about the lenguaje support?

Thank you.

fbaffoni

Okey people, after saw that topic, I think that i put my finger in the hole, or in a wrong place. hehehe.

I will try through support, to see what they say, in a not public place.

Thank you for everything!!

fbaffoni

Ok Thank you guys!.

Thas not good news, i hope the mikrotik people thikn about this possibiliti in next releases. Is very important to have a second HD with the RouterOS and his licence backuped.

fbaffoni

Hi people. I recently sold a mikrotik hotspot solution, and we sign a contract with our costumer that, in short words, we lost money if the server stop working. So i would like to have a backup of the HD`s PC where i will install RouterOS with the licence level 6. Can i do this? i mean, can i make a...

fbaffoni

Hi: I am trying to make a p2p link between 2 rb333 using 900Mhz with a SR9 board. One is configured as Ap bridge and the other end as Station. When i made a Freq Usg, i dont see nothing, even when i try to scan looking for AP`s nothing appears. Is this a problem of that version of Firmware? I can ma...

fbaffoni

at the other side i´ve got connected the clients, through a switch, in one ethernet. In the other ethernet i´ve got connected the ISP router (Cisco 1841). I connect the serial cable, when the links fall down, apparently seem to be all right, besides the ethernet ports appears Up. But that is not rea...

fbaffoni

I don´t got a firmware problem. The firmware is ok. The problem seem be the routerboard, or or something else. I NEED A SOLUTION HERE SUPPORT PEOPLE!! PLEASE.

fbaffoni

Hi. I got one RouterBoard working as hotspot in a hotel. This routerboard was working very well like for 30 days, after that the problems beging. First, the problem was the ISP (he gives me DHCP and sometimes the access to internet fault). So, we did contract a new dedicated ISP, with Fixed IP, the ...

fbaffoni

Hi: I am testing the mikrotik RouterBO 333, I have to make a security project in my country (i am from Argentina), we need to install a few cameras with one radio link each one. We are testing the througput that mikrotik can reach. Now... the question is: I am using nstreme-dual-slave, and i get 64 ...

fbaffoni

This is intresting. I am trying to insert a picture with the name of my company on the voucher, at first i did try with the Mikrotik logo, that comes in /hotspot/img/logobottom.png, and work perfectly!! But at the time to put my own logo, don´t show it, even i try replacing that logo with anotherone...

fbaffoni

Hi: I had a new project, and I thinking to use User-Manager, but i need to know how reliable is it. have you got any Traffic Generator for User-Manager? I need to know how many users can UM handle, without complications. Have you got any statistics of that? I read that with a Level 6, the amount of ...

fbaffoni

Hi, i am doing some test wit user-mangager, My questions is: I need to give a user one prepaid card, this card has 10 hours of credit, and the card expire after 30 days of the first loging. Te problem is, that when the client logoff the expiration time stop counting, so, the card will never expire. ...

fbaffoni

Normis!

When do you estimate that the upgrade of User-Manager will be done?

Could be greate if we can modificate the web pages, and the lenguage.

fbaffoni

Hi, I am testing a p2p connection with 2 MT. I am using one as Bridge and the otherone as Station. Without WDS and using NSTREME I can obtain 36Mbps Half Duplex. (Doing the Bw Test with UDP). How you can obtain 54Mbps? are you using WDS?.Are you bonding two links? Please post your configuration. I c...

Search found 91 matches