CubePRO with 7.4 = kernel failure
Downgrade do latest ROS6 (6.49.6) did not help. After some time is MCS1 on link. Disable/enable 60G radio a MCS is 9So my solution is downgrade to ROS 6 on the latest Stable FW and all are working fine
With 6.49.6 ?I have face this issue also in my new purchase CubePro kit. So my solution is downgrade to ROS 6 on the latest Stable FW and all are working fine. distance is almost 200+ meter with LOS
We need some outdoor equipment that will be supported. rb922 and rbM11 are unfortunately not supported :(CAPsMAN does not support WW2 at the moment.
Note that WW2 is planned for future devices, that's why there are additional requirements in terms of hardware.
+ 1Next beta version will have possible fixes for some disconnection issues.
Thanks for info. But no info from Mikrotik in changelogMy Gigaset C610A IP successfully registered at 3 different SIP gateways after enabling MNDP in IP -> Neighbours.Is there fixed problem with MNDP protocol ?
Why only one?Only one single developer from MikroTik "Reinis" knows when he will finish his own implementation of MU-MIMO ...
Now it works on rb711. ThanksThe problem with "broken" MIPSBE packages has been resolved. We are very sorry for all the inconvenience caused.
It will never work as well as 3 separate radiosYes, it's my actual solution but i would to centralized all in one board.Why Using cards in One Board and not a all Outdoor Solution like SXt / QRT / etc?
https://mikrotik.com/product/R11e-2HPnDIf it impossible, help me to select BaseBox2 (RB912UAG-2HPnD-OUT) compatible miniPCI module for creation second independent 2.4GHz. wifi channel, please.
Thanks for infoYes, really, it's that serious!
shock for meMikrotik have known about this for a year and have done nothing to fix it.
Do you have any specific information about something to happen?Will a new wireless driver package for 802.11ac be released in 6.45 or is it planned for a later RouterOS version?
As a WISP - I'm primarily interested in wireless so I'm interested about spectral scan on AC. And wave2 support?Nothing has changed from that time. Please suggest what answer you wanted to hear.
Yes, we are talking about RC3 firmware, but it is not yet publicly released...No one is talking about RC2 or RC3, we talk about Wireless Protocol NV2I cant see rc3 firmware!!!
Where can download?
Wait for RC2:Hello anyone has tried the new Version 6.44rc1 ?
I have the same questionWill the new driver appear in version 6.X or do we need to wait for the legendary version 7?You are right, that MikroTik made wireless driver doesn't have Wave2 support, so new chipset benefits are not there. We are working on a new driver.
Ok, the apple is solved. And the rest?Not true, new betas fix the issue with Apple and the issue is with Apple new driver, not RouterOS driver.- they incompatible to some Intel and Apple devices
That is trueThank you very much for this present!
Now if I have a country set I can only use regulatory domain and default scanlist, a real pain in the a*s.
That should be in changelog!
Yes it is 5470-5725Mhz , but it is commonly referred to as I wrote. (fully channels)outdoor is exactly 5470MHz-5725MHz not 5500MHz-5700MHz mentioned by you in older posts .. indoor exactly 5150MHz-5350MHz not 5180MHz-5320MHz mentioned by you.I know this document. What exactly is wrong?
I know this document. What exactly is wrong?THIS IS NOT CORRECT! try to read this link and you will have a CLEAR knowledge which is allowed in Czech Republic and which is not .
And that's the progress New AC - worse than oldI have partially to correct myself: the last firmware still miss the slot but now it works a little bit better but 30% slower than old AC hardware
Up to 8 clientsHow many clients can I connect to an AP?
YesDo I need a simple L4 license to the AP?
up to 1500 metersThe clients are nearly in a line. What maximum distance I could except to the AP?
boot of old rb411 with @300Mhz is more faster1Minute 48 seconds, hap ac2 with 6.43.7
Can you share any results? The same configuration with LEDE and with ROS?My M11G with Lede/ Openwrt and Ath10k performances much better then with Ros!
Are you kidding? It is the end of 2018. We have AC hardware and you consider the 53 Mbit result to be good? With 40Mhz on P2P?You are right, 802.11 is better, but now it can conect in nv2 and work
Please no new 6.44beta...New beta build will be released later today. Had to polish some new features before releasing the version.
Mikrotik reads this topic. They just do not write anything.No wait today is sad day I am installing a new tower with ubiquiti antennas, it's the first without mikrotik
In the afternoon I 'll post some pics!!!!
And? Can you share it with us? Or with email@example.comI have a full Syslog!You have a proof? For example, screens or something?Fix ROS6.43.3 because I am sure 10000% it is still vulnerable and I saw the proof tonight with a very long fight.
You have a proof? For example, screens or something?Fix ROS6.43.3 because I am sure 10000% it is still vulnerable and I saw the proof tonight with a very long fight.
Hello Normis.rc45 contains Nv2+ARM fix. It will be released within the next 24 hours.
Now deployed into full operation. So far everything seems OKWaiting for everyone in this thread to buy one and test it before ordering mine!Ordered one today since it's now available at several resellers.
+ 1@Normis can you tell us how many time we have to wait for the solution of this problem? If you can't resolve it please tell us, transparency for your customers please.
Hello. It is fixed since 6.43? Why no info in changelog? No info on forum until nowHello, RB3011 Port Flapping problem is addressed by means of a new CPU Flow Control setting in RouterOS v6.43.