Do you want to have feedback on your config? I was able to use an older radio and get a working config as an example. There are only two parts that don't transfer. set [ find default-name=wlan1 ] band=5ghz-a/n country="united states" \ disabled=no frequency=5825 installation=outdoor ssid=...

# 1970-01-04 19:32:18 by RouterOS 7.15.3 # software id = 71D5-TJ45 # # model = L11UG-5HaxD # serial number = _________ /interface bridge add name=bridge1 protocol-mode=none /interface list add name=WAN add name=LAN /interface wifi channel add band=5ghz-ac disabled=no name=AC /interface wifi securit...

Yes I would, but I am traveling at the moment. I have the radio, but no antennas to power it up safely. Gimme two days to get home.

I ended up returning it as I couldn't get any communication with the device (even when trying netinstall).

Thanks for the help though.

I am told: "As of today, wifi-qcom/AX driver is equipped with only Home-AP quickSet preset. Manual configuration required." Which is fine, I have been trying to do that. My issue is, trying to connect to an existing WiFi gives me the message, "not running". What does this even me...

I wanted to start over, so I tried resetting the configuration. Ethernet never showed activity, so I tried the other reset modes and they all act the same way. The device beeps and all LEDs except the Ethernet come on for half a second then off. Like ten seconds later the same LEDs flash and beep tw...