For me, after upgrading to 7.15.3 or 7.16beta it has not happened again... It happened to me with 7.15.3, and I cannot understand why. I don't think that it's a question of power surge because I use a usb isolator and the dongle gets power from a usb power injector, so the mikrotik usb is electrica...

Solved creating VRF "LTETEST" with interfaces =none and adding a route to 8.8.8.8 with gateway 192.168.8.1 using the dinamically created routing table

now i can test lte connection with ping 8.8.8.8 vrf=LTETEST

but the difference between the two dongles remains a mystery

Good day, recently I bought an RB5009UG+S+IN, updated it to the latest stable version (v7.14.3) and tested out with it a D-Link DWM-157 USB modem. When I was done with the experiments, I unplugged the modem and suddenly lost connectivity to the router after which I realized it had rebooted itself. ...

Hi everyone. I run a RB5009 with pppoe main ftth connection and a usb lte dongle for failover. Everything works as expected if I use the Alcatel IK1VE. The route distance for the lte dongle is set to 2 and the route distance for pppoe conenction is set to 1. If I issue, e.g., the command "ping ...

Hi everyone, I just bought this lte dongle and I successfully tested it on two routerboards in my possession without any problem. Just plugged in after the initial configuration on my windows workstation. Tested on RB433UAH with 6.48.6 mipsbe and Rb5009 with 7.15.3 arm64. The software version of the...

If I want to keep off an LTE modem for e.g. 10 days and I want to check if usb connection is working every 12 hours turning on usb and then turning it off again for 10 days Maybe you have a "wrong" example. What if you make the USB power-reset have a duration of 11:59:50, then you have a ...

Hello everyone, I noticed an issue with these commands on ROS 7.15.3 I will try to describe the problem with some examples: If usb is already ON and I issue the command /system/routerboard/usb/ power-reset bus=1 the power of usb port will be cut for 6 seconds and it's OK If usb is already ON and I i...

Since you mention USB, the L0009 be the winner since it has USB 3.0. But beware of probable interference to 2.4GHz WiFi caused by USB3 (search the internet ). Thanks for this information, I wasn't aware of it. Anyway the LTE modem is USB 2.0 and antennas are placed out of the cabinet via coaxial ca...

Since you mention USB, the L0009 be the winner since it has USB 3.0. While RBM33G is USB 2.0. I'd go with the L009 just on the fact plus @normis's point the L009 has been more heavily tested with V7. Whether L009 or RMB33G is better/worse is likely pretty close and depend on the exact configuration...

Hello,

I'm actually using a RBM33G with FTTH 1000/300 with onboard configured multiple vpn tunnels, vpn server, firewall rules etc.
I get generally 980/280 Mbps without any problem and during this speedtest cpu hits about 60% usage.

If you don't care about WiFi at all (because it has 2GHz only), sure. But if you want not only equal performance + ARM packages, but also better performance, consider RB4011/RB5011 But he wants a USB port, the next step is more likely to be a RB5009, isn't it? Same list price of 219$ of the 4011, a...

Thank you for your answers. Yes, I need more functions available only on ARM architecture (like ZeroTier), a device that can be installed in a small network rack with external antennas with a good heat dissipation design, and more processing power. AX2 has no USB that I need for LTE failover and has...

Hi everyone, I would like to upgrade my current RBM33G with the L009UiGS-2HaxD-IN but I'm in trouble understanding Mikrotik performance tests. It looks like that the RBM33G is a bit more performant than L009UiGS-2HaxD-IN. https://mikrotik.com/product/rbm33g#fndtn-testresults https://mikrotik.com/pro...

Thank you all for your answers

by default POE is turned OFF and it won't turn on by itself if connected to a device that doesn't ask for power. at least for me it never happened while it's set to auto. if you set it to forced-on, yes it will power anything and probably fry a non-poe device. you can always use a gigabit poe injec...

Thank you for answering to my question. Last night I had a look to a webpage where is explained how wiring of PoE is designed. I noticed tha power is injected using the center tap of ethernet transformers and due to the differential nature of ethernet signal the dc on the pair is "ignoired"...

Hi everyone, I tried to find answers around, in this forum too and somewhere else. The question is simple. I would like to buy the Mikrotik hAP ax3 to connect the 2.5g ether1 port to the fiber to copper media converter of my internet service provider. The media converter is not poe. My question is: ...