Community discussions

Search found 387 matches

  • 1
  • 2
by QpoX
Thu Mar 14, 2013 9:00 pm
Forum: General
Topic: MUM Croatia NEW PRODUCT ANNOUNCEMENT
Replies: 42
Views: 17208

Re: MUM Croatia NEW PRODUCT ANNOUNCEMENT

CRS sounds really nice, bye bye Cisco switches!
I was going to buy some new HP switches next week, but lucky for me that this news comes along!
Hope waiting a few months will be worth it :)
by QpoX
Thu Dec 13, 2012 5:51 pm
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19721

Re: SMS receiving now supported, can run scripts

Some CellPhone providers allow Email->SMS
ex. 1234567890@sms.myprovider.tld
Then when sending a mail to an email address, the user will get an sms.
by QpoX
Thu Sep 29, 2011 2:00 am
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

Here is my final log of this test... so it's no working solution...
Now all metarouter interfaces have been disabled again, and it runs stable, but no network to the virtual machines.
RB450G_Clipboard02.jpg
by QpoX
Wed Sep 28, 2011 2:15 pm
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

Here is my Log:
rb450g-Clipboard01.jpg
by QpoX
Wed Sep 28, 2011 2:26 am
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

nope, died on me after 2 hours
Mine did run for 7hours! then the dude told me that is was down, then 2mins later it was up again.
5mins after it came up again, it went down for about 5mins and came up.
And has now been running for 1½ hours with no downtime.
by QpoX
Tue Sep 27, 2011 5:27 pm
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

set to switch-all-ports=no lets wait for the results. if you set to switch all ports=yes, do the problem stop for you? edit: left running and sending ping requests to the router. will leave it for the night. Did just change mine from "yes" to "no" and has been running fine for about 5mins now (4½mi...
by QpoX
Mon Sep 26, 2011 6:07 pm
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

after reading this in the morning i set up RB450G with metarouter configured as follows: /metarouter add name=mr1 memory=32 /interface virtual-ethernet add /metarouter interface add virtual-machine=mr1 type=static static-interface=ether5 /metarouter interface add virtual-machine=mr1 type=static sta...
by QpoX
Tue Sep 13, 2011 6:12 pm
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

Ever since i got RB450G i had the metarouter problem... And since then i've been trying to find the problem. Now my testing show's that it is a mr-network problem. If i add 8 RouterOS metarouter's with no network connection, it runs fine for weeks, not even a single problem. But if i add a interface...
by QpoX
Thu May 05, 2011 12:48 am
Forum: The Dude
Topic: MY MIKROTIK PC SERVER RESTARTS AUTOMATICALLY
Replies: 6
Views: 2405

Re: MY MIKROTIK PC SERVER RESTARTS AUTOMATICALLY

2.9.27??? just upgrade (as in pay for a licens!!!)...
by QpoX
Fri Apr 22, 2011 2:13 pm
Forum: RouterBOARD hardware
Topic: RB1100
Replies: 185
Views: 64317

Re: RB1100

How can I connect a APC Smart UPS to RB1100? On serial is not working. :(
Did you disable the console support on the serial port first?
by QpoX
Tue Apr 05, 2011 5:32 pm
Forum: RouterBOARD hardware
Topic: [ask] reset rb450 ros
Replies: 14
Views: 14835

Re: [ask] reset rb450 ros

With the console cable connected and powered on, with hyperterminal window opened, I did not see anything on the screen, I rebooted severally, still same, connected a lan cable, light came on on the LAN, with limite connectivity, waited and activated winbox, cannot see mac address or IP, please wha...
by QpoX
Mon Apr 04, 2011 4:58 am
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

Another case where MR would be useful came up yesterday. This time with brand new RB493G and ROS 4.17 (I understood that it was mostly RB450G with problems, so why not). And really, it was much better. Except for one strange MR lockup at the beginning (I pretended that I didn't see it), it appeared...
by QpoX
Wed Jun 23, 2010 7:11 pm
Forum: The Dude
Topic: Vote for new DUDE features!
Replies: 117
Views: 47027

Re: Vote for new DUDE features!

Hi All, what about Dude for IPad? Sonny iPad only has a small market share (only 3mio sold units). So making one just for iPad is a waste, and so will making one for Android also. A Webinterface with Ajax or so, will be a better solution for all! Since iOS, Android, Symbian, and blah blah blah, wil...
by QpoX
Sat Apr 24, 2010 6:30 am
Forum: General
Topic: Forum feature: karma voting
Replies: 54
Views: 32136

Re: Forum feature: karma voting

i guess that tells me i am spending way too much time here : ) that past 6-7 years... dang.
Next to you, there is a door... use it :)
by QpoX
Mon Apr 19, 2010 2:36 am
Forum: Wireless Networking
Topic: R52H AP radio with iPad
Replies: 2
Views: 1064

Re: R52H AP radio with iPad

The iPad has some wifi problems... And as i recall the iPad has a/b/g/n.
by QpoX
Sun Apr 18, 2010 4:26 pm
Forum: General
Topic: Feature Request: Winbox for BlackBerry (crazy but effective)
Replies: 44
Views: 27981

Re: Feature Request: Winbox for BlackBerry (crazy but effect

The new RouterOS 5 beta has a new webinterface... Thanks! Have you used it? How close to Winbox is it? The old web interface had no access to the hospot section. How about this new beta version? Yes, i did try it, and i look's alot like winbox. Can't tell you about the hotspot, since i don't have i...
by QpoX
Sun Apr 18, 2010 3:59 pm
Forum: General
Topic: Feature Request: Winbox for BlackBerry (crazy but effective)
Replies: 44
Views: 27981

Re: Feature Request: Winbox for BlackBerry (crazy but effect

Has any progress been made on this? My preference is a better web-based control program. I use ssh to control my system, but my new assistant is not as ssh literate as I am. And the current web interface on V3.30 is inadequate. Winbox is far superior to that interface. I have a pair of Blackberries...
by QpoX
Thu Apr 01, 2010 1:29 pm
Forum: RouterBOARD hardware
Topic: RB1100
Replies: 185
Views: 64317

Re: RB1100

On april 1st, anything is possible :)
\o/
by QpoX
Thu Mar 18, 2010 9:39 pm
Forum: General
Topic: Intel Atom board D945GCLF fot MT
Replies: 27
Views: 5547

Re: Intel Atom board D945GCLF fot MT

RB1100 pricing and capabilities are quite good and bypass feature is a nice bonus. One thing amiss is lack of USB port(s) on RB1100.

Anybody knows how many fans are on RB1100 and how noisy it is?

No fans.
by QpoX
Mon Mar 08, 2010 12:13 pm
Forum: General
Topic: Winbox and IPv6
Replies: 13
Views: 5082

Re: Winbox and IPv6

I second this motion.
Look at RouterOS v5 (will be out in 1-2 weeks).
by QpoX
Sat Mar 06, 2010 12:47 am
Forum: Wireless Networking
Topic: Program to draw diagram
Replies: 7
Views: 2631

Re: Program to draw diagram

Multi platform - http://creately.com
by QpoX
Tue Mar 02, 2010 2:52 pm
Forum: General
Topic: ping using interface broken in terminal but not GUI in v4.4
Replies: 4
Views: 2176

Re: ping using interface broken in terminal but not GUI in v4.4

Same problem in ROS 3.30(RB450G) and 3.31(RB750G).
Upgrade to 4.6,it's free, so why not? :)
by QpoX
Mon Mar 01, 2010 5:11 pm
Forum: General
Topic: Broken packages?
Replies: 1
Views: 934

Re: Broken packages?

I have downloaded and attempted to install the 4.6 packages (mipsle and mibsle) and both units report a broken package error upon rebooting. Anyone else having similar problems?
Choose another mirror or use bittorrent download.
by QpoX
Mon Mar 01, 2010 2:59 pm
Forum: RouterBOARD hardware
Topic: RB1100
Replies: 185
Views: 64317

Re: RB1100

Price?
one million dollars!
Image


In a other thread they did say about $500 (but it was unclear).
Sorry about the Dr. Evil, could not help myself :)
by QpoX
Mon Mar 01, 2010 2:18 am
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

Re: GPS Problem

RouterOS 4.6 has fixed this problem now!
My RB411U has been running almost 2days now, with no problems :)

Thx Mikrotik Team...
And maybe i spoke to soon :(
It broke after 2days.
jan/01/2002 01:00:03 system,error,critical System rebooted because of kernel failure
by QpoX
Sun Feb 28, 2010 1:06 pm
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

Re: GPS Problem

RouterOS 4.6 has fixed this problem now!
My RB411U has been running almost 2days now, with no problems :)

Thx Mikrotik Team...
by QpoX
Mon Feb 15, 2010 6:12 am
Forum: General
Topic: [Solved] How to unbrick a RouterBoard 750(G)
Replies: 7
Views: 6694

Re: [Solved] How to unbrick a RouterBoard 750(G)

Those points on the board are definitely not serial, as that would show up in winbox even without the serial port connector. They are more likely something like jtag or lpc to program the flash at the factory. If you look at the components, there is no max232. So if it was serial you would need a T...
by QpoX
Tue Feb 09, 2010 1:20 pm
Forum: General
Topic: [Solved] How to unbrick a RouterBoard 750(G)
Replies: 7
Views: 6694

Re: How to unbrick a RouterBoard 750(G)

I did also managed to brick one of mine RB750.
Just did the netinstall (RTM) and it works again!
No need for serial :)
by QpoX
Tue Feb 09, 2010 1:13 pm
Forum: Beginner Basics
Topic: 133 board as an AP
Replies: 3
Views: 572

Re: 133 board as an AP

I use a RB133 with about 20 CPE's and it servs around 10Mbit.
by QpoX
Tue Feb 02, 2010 10:00 pm
Forum: General
Topic: New sweet version of MikroTik RouterBOARD 750
Replies: 4
Views: 2921

Re: New sweet version of MikroTik RouterBOARD 750

What are the specs on it? :)
by QpoX
Tue Jan 12, 2010 4:53 pm
Forum: The Dude
Topic: 3.5 Syslog stop working?
Replies: 7
Views: 2179

Re: 3.5 Syslog stop working?

I didnt go so far to create a firewall rule to log it, but there were a couple dozen connections on port 514 to the router.
ohh yeah... port 514 and not 123 :lol:
How is your Dude set up, to recive the remote logs?
by QpoX
Tue Jan 12, 2010 8:10 am
Forum: The Dude
Topic: 3.5 Syslog stop working?
Replies: 7
Views: 2179

Re: 3.5 Syslog stop working?

Is there data comming to the syslogd? setup a firewall rule to log data on port 123, and see if data is comming to it.
Or if the data is lost another place.
by QpoX
Sat Jan 09, 2010 6:07 pm
Forum: Beginner Basics
Topic: IRC port forwarding
Replies: 1
Views: 2861

Re: IRC port forwarding

Is'nt it just an identd problem? i think it runs on port 113...
by QpoX
Fri Jan 08, 2010 8:25 am
Forum: The Dude
Topic: Dude is Gone
Replies: 2
Views: 770

Re: Dude is Gone

Try and write protect it...
by QpoX
Fri Jan 08, 2010 8:03 am
Forum: RouterBOARD hardware
Topic: Capacitor issue with RB450?
Replies: 8
Views: 1422

Re: Capacitor issue with RB450?

Hi there, I've got a lot of RB450's in my network, probably more than a hundred. For the last three months or so I've seen more and more die with an odd issue. It seems like there is some capacitor that overloades, causing the router to die. If you remove the power for a minute or so when the capac...
by QpoX
Sat Dec 26, 2009 4:07 pm
Forum: Wireless Networking
Topic: Mikrotik on facebook
Replies: 1
Views: 454

Re: Mikrotik on facebook

It is a welcome idea please speed it up we cant wait to have it available
Do you mean something like this?
http://www.facebook.com/pages/MikroTik/162299389602
http://www.facebook.com/group.php?gid=31525678112
by QpoX
Thu Dec 24, 2009 3:00 am
Forum: General
Topic: ping using interface broken in terminal but not GUI in v4.4
Replies: 4
Views: 2176

Re: ping using interface broken in terminal but not GUI in v4.4

When i set the interface, it also gives timeout...
by QpoX
Tue Dec 22, 2009 1:21 am
Forum: General
Topic: Automated Mikrotik Backups From Windows Securely
Replies: 4
Views: 821

Re: Automated Mikrotik Backups From Windows Securely

Nice work...

Did just try it and it does not work for me (Windows XP Pro SP3).
It creates empty files and let's cmd.exe and plink.exe run in the background.
by QpoX
Mon Dec 21, 2009 1:15 am
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

Re: GPS Problem

From 4.4 on R411U: Did nothing else but what i did in the terminal... And why is it, that when i update my RB411U all extra packages are lost? I always loose the GPS and NTP i have installed extra... MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT...
by QpoX
Fri Dec 18, 2009 4:54 pm
Forum: General
Topic: 5Kw 130 foot AM Tower
Replies: 6
Views: 1569

Re: 5Kw 130 foot AM Tower

Just to share my exprience, I have used an FM Tower (600W RF) without any problems, I done several test with the fm on and off and no diference between cases.
Regards.
nano-array.jpg
2,4GHz or 5GHz?
I like your antenna mount :)
by QpoX
Fri Dec 18, 2009 4:45 pm
Forum: General
Topic: IPv6 over PPPoE
Replies: 140
Views: 26142

Re: IPv6 over PPPoE

If we used all the IPv6 address' then damm... Well I've got 1,208,925,819,614,629,174,706,176 IPv6 addresses allocated to me (a /48) but I can't use them until MT have IPv6oPPPoE working :-( OK. Strictly speaking, I can use them if I ditch MT and use something else... I got 2x /64 and a /48 pending...
by QpoX
Fri Dec 18, 2009 10:39 am
Forum: General
Topic: The StripperPole Solution
Replies: 5
Views: 1966

Re: The StripperPole Solution

hahahaa

this is just lol!

Sam
Well it does the job :)
by QpoX
Thu Dec 17, 2009 10:14 pm
Forum: General
Topic: IPv6 over PPPoE
Replies: 140
Views: 26142

Re: IPv6 over PPPoE

first querter of 21st century %)
Then we should again wait for IPv32 :lol:
If we used all the IPv6 address' then damm...
by QpoX
Wed Dec 16, 2009 1:44 pm
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

it should fix rebooting router problem, at least my test routers have not rebooted after installing version with patches. Sadly other problems in that build prevent me for giving out some pre-release versions. Just as long that the GPS problem is fixed (as i was promised since 4.1) edontcare about ...
by QpoX
Wed Dec 16, 2009 11:14 am
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

ok, monday ! apparently I'm not so good at predictions.
Normis you really need to get your crystalball clean'd! :)
Hmm... bump?
by QpoX
Mon Dec 14, 2009 11:06 pm
Forum: General
Topic: The StripperPole Solution
Replies: 5
Views: 1966

Re: The StripperPole Solution

Do the dancers get caught up in the LMR400 and cat5?
No strippers allow'd on it! only sexy slutty wifi equipment ;)
by QpoX
Mon Dec 14, 2009 8:31 pm
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

ok, monday ! apparently I'm not so good at predictions.
Normis you really need to get your crystalball clean'd! :)
by QpoX
Sun Dec 13, 2009 11:50 am
Forum: General
Topic: The StripperPole Solution
Replies: 5
Views: 1966

The StripperPole Solution

I've had a problem testing my wifi equipment, it has just been laying on the table. But i wanted to mount it for testing, but the problem of building something (and not having the tools) i was forced to think of another solution. And this is what i came up with... A Stripper/Dance-Pole Like this: ht...
by QpoX
Sun Dec 13, 2009 11:18 am
Forum: General
Topic: RB133C and ROS 4
Replies: 5
Views: 981

Re: RB133C and ROS 4

I run ROS 4.3 on all of my RB133. Works better than ROS 3.x
by QpoX
Fri Dec 11, 2009 5:25 pm
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

let's buy a fortune-teller's magical crystal globe by the next MUM and present it to Normis ))
Madam Normis? :lol:
by QpoX
Fri Dec 11, 2009 4:20 pm
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

ok, monday ! apparently I'm not so good at predictions.
Yes i did notice that :)
by QpoX
Fri Dec 11, 2009 2:36 pm
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

this week
Like today or before Sunday?
by QpoX
Mon Dec 07, 2009 9:10 am
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

lets wait for 4.4 and see if that version solves your problem with hanging (rebooting) routers.
When is 4.4 due?
by QpoX
Mon Dec 07, 2009 3:51 am
Forum: General
Topic: RouterOS License and v4 questions
Replies: 116
Views: 47780

Re: RouterOS License and v4 questions

I own a copy of 2.9.27 How do I promoted him pictures Commentary plz
own?
by QpoX
Thu Nov 26, 2009 8:00 pm
Forum: General
Topic: Winbox For Other OS's
Replies: 82
Views: 20640

Re: Winbox For Other OS's

The simple thing is to have the webinterface, and a java? based program (to run on Windows, Linux and OSX) to set a ip to the unit, via the mac address. The only purpose of the program is to list unit's found (like winbox) and setting the IP, so that a connection can be made to the webinterface. Eve...
by QpoX
Thu Nov 26, 2009 5:15 am
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

Re: GPS Problem

Now i am promised that it will be fixed in 4.3 :) And it was not fixed... :( Died after 5hours. On RB411U: [admin@MikroTik] > /system serial-terminal usb2 failure: port's channel is already in use [admin@MikroTik] > /system gps set port=usb2 set-system-time=yes enabled=no action timed out - try aga...
by QpoX
Sat Nov 21, 2009 4:55 am
Forum: General
Topic: Google earth addons?
Replies: 2
Views: 915

Re: Google earth addons?

Hey, Does any one know any cool addons for google earth that are usefull when planning a wisp or any thing wireless? like i want to be able to add small pictures of towers? Like instead of a yellow pin i want to add a small image. and a small logo for a client and maybe draw lines where my towers c...
by QpoX
Sat Nov 21, 2009 2:32 am
Forum: The User Manager
Topic: Only One not work
Replies: 2
Views: 678

Re: Only One not work

1. no one can't really see what's on the picture...
2. tjeck the status on "One Session Per Host".
by QpoX
Fri Nov 20, 2009 4:51 pm
Forum: General
Topic: Mikrotik and vmware esx server
Replies: 25
Views: 10305

Re: Mikrotik and vmware esx server

2-3 days
No 4.3 this week then? :(
by QpoX
Mon Nov 16, 2009 3:19 pm
Forum: General
Topic: Mikrotik and vmware esx server
Replies: 25
Views: 10305

Re: Mikrotik and vmware esx server

E1000 is broken in your version, in v4.3 it will be fixed
When is 4.3 due?
by QpoX
Fri Nov 13, 2009 12:33 pm
Forum: General
Topic: Newsletter #19
Replies: 20
Views: 3360

Re: Newsletter #19

accelerometer
it would be nice to reboot the router by simply shaking your iPhone :D
Don't sneeze!
by QpoX
Tue Nov 10, 2009 1:20 am
Forum: RouterBOARD hardware
Topic: RB750G revealed!
Replies: 37
Views: 21994

Re: RB750G revealed!

What's inside the brand new RB750G.
rb750g_top_naked_small.jpg
For a larger top and bottom image...

http://www.roc-noc.com/rb750g_top_naked_large.jpg
http://www.roc-noc.com/rb750g_bottom_naked_large.jpg

Tom
*mmm* naked hardware... Thx!
by QpoX
Tue Nov 10, 2009 1:19 am
Forum: RouterBOARD hardware
Topic: RB750G Gigabit!!!
Replies: 15
Views: 3645

Re: RB750G Gigabit!!!

We're already using 450G and very happy with that. We can not user metarouter in 32Meg and that's the problem for 750G (We tried on Routerboard 450). Also price wise 750G is cheaper with it's cute case and he has a happy power adapter :) in it's box. It would be nice, if it had aleast 64MB of ram.....
by QpoX
Sat Nov 07, 2009 1:18 pm
Forum: General
Topic: Is there anyway to logout from the console?
Replies: 3
Views: 4568

Re: Is there anyway to logout from the console?

/quit
or ctrl+d
by QpoX
Fri Nov 06, 2009 8:58 pm
Forum: General
Topic: Fix the BGP crashes
Replies: 6
Views: 1481

Re: Fix the BGP crashes

v5??? why not fix the errors in v4? :)
by QpoX
Fri Nov 06, 2009 2:19 pm
Forum: General
Topic: v3.X uptime challenge
Replies: 55
Views: 12165

Re: v3.X uptime challenge

We all need to start at 1/1-2010 +00:00 UTC :)
by QpoX
Thu Nov 05, 2009 5:15 pm
Forum: Virtualization
Topic: RB750 is Meta router even possible?
Replies: 5
Views: 3886

Re: RB750 is Meta router even possible?

RB750 has 32MB ram and RouterOS needs at least 16MB ram.
OpenWRT may be the solution, but use other hardware to run metarouter. RB750 is not the best for this :(
by QpoX
Wed Nov 04, 2009 3:05 pm
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

Re: GPS Problem

Now i am promised that it will be fixed in 4.3 :)
by QpoX
Mon Nov 02, 2009 2:59 pm
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

Re: GPS Problem

I want to weigh in on the GPS not working using X86 ROS. It is working correctly, when I move the GPS receiver output to a RB433AH so the GPS itself is working. I have installed the GPS pkg in the X86 box, and it seems to configure correctly. I am using ROS 4.2 in both devices. -tp Do you also get ...
by QpoX
Thu Oct 29, 2009 11:19 am
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

Re: GPS Problem

Reply from Mikrotik: it will be fixed in 4.2
And it was not fixed! :(
by QpoX
Sun Oct 25, 2009 7:52 pm
Forum: The Dude
Topic: Bug on Dude on last Sunday of Octuber, this year again
Replies: 2
Views: 631

Re: Bug on Dude on last Sunday of Octuber, this year again

Every year, since the last 3 years the same problem. When there is the time change and the clock changes from 3 a.m. to 2 a.m. on last Sunday of Octuber the Dude database is corrupted and I have to reinstall the Dude and restore the last backup. The bug is still on 3.4. Anybody hace noticied this? ...
by QpoX
Sat Oct 24, 2009 10:48 am
Forum: General
Topic: v3.X uptime challenge
Replies: 55
Views: 12165

Re: v3.X uptime challenge

Figured seeing as we go through different versions it'd be great to see who has the best uptime on the now *old* v3-running devices. I'll start us off with a PowerRouter 732 that runs part of a wireless network I'm slowly disassembling. mt-uptime.PNG Not as good as yours but, here is mine RB333: Cl...
by QpoX
Sat Oct 24, 2009 10:41 am
Forum: General
Topic: how block HOST
Replies: 3
Views: 540

Re: how block HOST

Block what (IP address or FQDN) from doing what?
Im iterested block HOST (anyhost.dyndns.org)
HOST has dinamic IP
Update your RouterOS... or buy a licens...
by QpoX
Sat Oct 24, 2009 7:26 am
Forum: General
Topic: Wish: RB1000 more ports, SFP-Ports
Replies: 24
Views: 3385

Re: Wish: RB1000 more ports, SFP-Ports

I'm currently trying to think my way around building a Mikrotik based router with two 10G interfaces, but as far as my research goes, 10G wire-speed isn't going to happen, even with two quad-core intel core-i7 processors with triple-channel ddr3 ram... therefore, if mikrotik is ever going to make t...
by QpoX
Sat Oct 24, 2009 6:09 am
Forum: Virtualization
Topic: RB450G + openwrt Metarouter strange problem
Replies: 221
Views: 76548

Re: RB450G + openwrt Metarouter strange problem

Did also have problems with Metarouter on my RB750 (i have 4) and RB411U when i add a metarouter (just RouterOS) and both with and without network on it. It starts up (can see it using metarouter console), then i get disconnected from Winbox and i can't get in again... Just gets random reboots after...
by QpoX
Fri Oct 23, 2009 9:32 am
Forum: General
Topic: Feature Request: Winbox for BlackBerry (crazy but effective)
Replies: 44
Views: 27981

Re: Feature Request: Winbox for BlackBerry (crazy but effective)

Yes android will be future mobile OS. But it could be great to do it for linux running on arm cpu based systems, phones, MIDs....Or is any way to run winbox on linux running on arm based CPUs? Well there is about 60-70 million running iPhone/iPod operatingsystem... Andorid in only running on about ...
by QpoX
Fri Oct 23, 2009 9:13 am
Forum: RouterBOARD hardware
Topic: Problems with Huawei E220 - "SIM failure"
Replies: 2
Views: 1569

Re: Problems with Huawei E220 - "SIM failure"

Sorry for bumping guys :oops:, but does anybody with Huawei E220 experience have any tips for me?
If there is no warranty, open it and clean the connectors to the Sim card.
Use a cotton swap and some ipa alcohol for this.

If it is an unlock problem try http://unlocke220.com
by QpoX
Thu Oct 22, 2009 9:50 pm
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

Re: GPS Problem

Reply from Mikrotik: it will be fixed in 4.2
by QpoX
Thu Oct 22, 2009 5:35 am
Forum: Wireless Networking
Topic: xr9 correct freq in router os
Replies: 11
Views: 2302

Re: xr9 correct freq in router os

Here is the XR9 Freq Table

http://www.ubnt.com/company/newsletter/0105.html

I hope this help you....
Can you provide something on XR1 and XR7?
mostly XR1...
by QpoX
Tue Oct 20, 2009 3:39 pm
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

Re: GPS Problem

why can't you disable it on RB, what happens? It say's that it is in use... but if i remove the cable and plug it back in it says that a background process is using it... Now what the f? MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK...
by QpoX
Tue Oct 20, 2009 4:11 am
Forum: General
Topic: GPS Problem
Replies: 18
Views: 3800

GPS Problem

Hi all Has anyone had problems with the GPS before? When i plug my GPS in, it all works fine... but after some time i just freezes! And i'm running RouterOS 3.30 also try'd with 4.0 and 4.1 no luck! This is from my RB411U: [admin@MikroTik] > /system gps monitor date-and-time: oct/19/2009 05:34:18 lo...
by QpoX
Mon Oct 19, 2009 8:57 pm
Forum: RouterBOARD hardware
Topic: Problems with RB411U
Replies: 4
Views: 1663

Re: Problems with RB411U

RB411U has little different ethernet from the other RB411 so on 100mbps link it will show you green solid light and on the activity it will blink the green led.
So you don't need to worry about it.
So only one LED works (the one on the left)? is this hardware or software made?
by QpoX
Mon Oct 19, 2009 3:00 am
Forum: General
Topic: RouterOS v3.30 and v4.1 LCD BUG
Replies: 8
Views: 2490

Re: RouterOS v3.30 and v4.1 LCD BUG

if this is a bot, then i'm quite fascinated...
by QpoX
Sun Oct 18, 2009 11:57 pm
Forum: RouterBOARD hardware
Topic: RB433U slot usage in tech demo
Replies: 1
Views: 457

Re: RB433U slot usage in tech demo

Can the RB433U actually support cards in all slots? I'm thinking an XR9, 2x R52Ns, and a USB dongle.
Why should'nt it? just make sure that you have enough Amp's from the PSU!
by QpoX
Sun Oct 18, 2009 7:40 am
Forum: Beginner Basics
Topic: Net Send Messages Via Mikrotik Os
Replies: 5
Views: 1500

Re: Net Send Messages Via Mikrotik Os

is'nt "net send" a part of the Microsoft Netbios thing?
by QpoX
Sat Oct 17, 2009 9:04 am
Forum: General
Topic: rb450g failed to boot with ros v4.1
Replies: 13
Views: 2880

Re: failed to boot - upgraded from v4.0 to v4.1

netinstall?
by QpoX
Sat Oct 17, 2009 7:45 am
Forum: RouterBOARD hardware
Topic: Problems with RB411U
Replies: 4
Views: 1663

Re: Wierd RB411U

After hitting it with a hammer for 4 hours, i got netinstall working! the 3.30 version did not work! so gave 4.1 a try... it work'd \o/
But still problems with the ethernet light.

Image

Image
by QpoX
Sat Oct 17, 2009 3:28 am
Forum: RouterBOARD hardware
Topic: Problems with RB411U
Replies: 4
Views: 1663

Problems with RB411U

Just got a RB411U from my dealer, but from the start it has been funny. The orange led on the ethernet port does not light up? It did start up and i used Winbox to remove the standard config and only added a DHCP client. Did a upgrade to 3.30 and rebootet it, then added a metarouter but then i got d...
by QpoX
Fri Oct 16, 2009 6:33 am
Forum: General
Topic: Wish: RB1000 more ports, SFP-Ports
Replies: 24
Views: 3385

Re: Wish: RB1000 more ports, SFP-Ports

Also a USB port or two...
And maybe more user leds, so it can tell if a peer is down or so.
by QpoX
Wed Oct 14, 2009 2:57 am
Forum: General
Topic: 4.0 final doesn't work on RB750
Replies: 13
Views: 1338

Re: 4.0 final doesn't work on RB750

Hello I first tried upgrading from 4.0rc1 by dragging the routeros-mipsbe-4.0.npk into files window and rebooting; it succeeded but ethernet interfaces didn't work. Then I tried netinstall; netinstall 4.0 doesn't detect RB750 as easily as netinstall 4.0rc1. After several attempts the reinstall succ...
by QpoX
Wed Oct 14, 2009 1:30 am
Forum: General
Topic: mikrotik t-shirts
Replies: 40
Views: 11755

Re: mikrotik t-shirts

Any word on the Mikrotik Thong :P jk I saw them on cafepress hehe
Normis will just get spammed with them in the mail :lol:
by QpoX
Tue Oct 13, 2009 11:35 pm
Forum: The Dude
Topic: RB411u sim card as storage?
Replies: 1
Views: 649

Re: RB411u sim card as storage?

Can sim card memory on RB411U be accessed the same way as sd card on RB433AH?
No... The Sim card slot can only talk to the modem in the mini PCI-e port... And not be mountet to the system!
by QpoX
Mon Oct 12, 2009 2:27 am
Forum: General
Topic: Force reboot
Replies: 17
Views: 55925

Re: Force reboot

Put it in a script.
/system reboot
Tested on RB532 and RB433
Doesn't it still need the yes or no answered?
by QpoX
Mon Oct 12, 2009 2:12 am
Forum: Wireless Networking
Topic: Successful 50km Link-TCP >100Mbit /Bonding/Dual Pol. Dish
Replies: 22
Views: 10298

Re: Successful 50km Link-TCP >100Mbit /Bonding/Dual Pol. Dish

Look's really nice...
Can you try and post your ping times?
A->B
B->C
C->D
A->D
And was the bandwidth test from D->A?
by QpoX
Wed Oct 07, 2009 2:22 am
Forum: General
Topic: LinBox the saga ! !
Replies: 5
Views: 1500

Re: LinBox the saga ! !

Try CrossOver... WinBox runs great with this! (it's based on Wine)...
But try and debug your Wine setup!
by QpoX
Fri Oct 02, 2009 9:37 pm
Forum: The Dude
Topic: Release Schedule and Donate?
Replies: 10
Views: 1148

Re: Release Schedule and Donate?

your approval and appreciation means a lot! to show your appreciation you can tell your friends and colleagues about the Dude and MikroTik. and keep buying MikroTik products. we are working on a completely new version of the dude, it will have loads of new features and a new database system, so jus...
by QpoX
Fri Oct 02, 2009 1:22 am
Forum: General
Topic: Soekris 5501 + RB44GV
Replies: 3
Views: 761

Re: Soekris 5501 + RB44GV

Hi, i am experiencing problems using a RB44GV into a Soekris 5501-70 board with R3.30 My setup is 2x1Gbps links between the Soekris via RB44GV to RB1000 in a balanced-rr/mii-type1 bonding grup. What happens is that whenever i try to do a bandwidth test, the Soekris board crashes after a few megabyt...
by QpoX
Fri Oct 02, 2009 1:03 am
Forum: General
Topic: RouterBoard 450 - Harware Failure
Replies: 15
Views: 6754

Re: RouterBoard 450 - Harware Failure

Did you try to connect to it via serial cable?
by QpoX
Thu Oct 01, 2009 7:46 pm
Forum: RouterBOARD hardware
Topic: RB133 bricked
Replies: 5
Views: 1248

Re: RB133 bricked

Try netinstall?
by QpoX
Tue Sep 29, 2009 12:10 am
Forum: General
Topic: Mikrotik and vmware esx server
Replies: 25
Views: 10305

Re: Mikrotik and vmware esx server

ESXi V4 provides IDE support. Problem solved...
Cool, upgrading my 3.5's then...
by QpoX
Mon Sep 28, 2009 6:31 pm
Forum: General
Topic: Mikrotik and vmware esx server
Replies: 25
Views: 10305

Re: Mikrotik and vmware esx server

Dear Friends, I have already installed & Implemented Mikrotick OS version 2.9, 3.2 on VMware Server Linux version on 64bit 3GHz Dual-Core CPU in HP Prolient ML350 Server without no any issue with 6 1GB/s NIC cards as well. Note: ==== Tested OS versions are CentOS 5.2, Ubuntu, Redhat, Windows 2003 S...
by QpoX
Thu Sep 24, 2009 7:50 pm
Forum: General
Topic: Need to make bootable USB key to install ROS on a server.
Replies: 11
Views: 6752

Re: Need to make bootable USB key to install ROS on a server.

Strange... i run it on VMware Server on Windows and Linux and VMware Fusion on Mac with no problems.
Or i have one where RouterOS only 9/10 times pick up the network interface... But after a reboot works fine?
Still need to troubleshoot this :)
by QpoX
Thu Sep 24, 2009 2:25 am
Forum: General
Topic: Need to make bootable USB key to install ROS on a server.
Replies: 11
Views: 6752

Re: Need to make bootable USB key to install ROS on a server.

Just my 5cents... Get them to install Ubuntu, Debian or other Linux dist on the server, then you install VMware Server (free) and install RouterOS on a virtual platform. The great thing is if you b0rk something up, you can still get a hold of the RouterOS via the teminal... Or maybe you need more Ro...
by QpoX
Thu Sep 24, 2009 1:14 am
Forum: General
Topic: SNMP MIB Database
Replies: 7
Views: 24622

Re: SNMP MIB Database

by QpoX
Mon Sep 21, 2009 7:41 pm
Forum: The Dude
Topic: dude send sms
Replies: 13
Views: 8169

Re: dude send sms

I use SMStools...
But would be nice, not to have another machine running...
by QpoX
Mon Sep 21, 2009 3:00 pm
Forum: The Dude
Topic: dude send sms
Replies: 13
Views: 8169

Re: dude send sms

In Denmark all the operators closed this feature about 8years ago... So no Email to SMS for us...
So if RouterOS can be a SMS GW for The Dude, it would be nice :)
by QpoX
Mon Sep 21, 2009 1:48 am
Forum: General
Topic: Intel vPro with Mikrotik RouterOS
Replies: 15
Views: 2397

Re: Intel vPro with Mikrotik RouterOS

What kind of 3. party software do you need??? I don't really see a need for this... Mikrotik should use the time for fixing bugs and making RouterOS better and better! And about the Apple AppStore, other's have try'd to copy the concept and are failling! Do Cisco or Juniper have an "AppStore", i don...
by QpoX
Sat Sep 19, 2009 1:28 pm
Forum: General
Topic: Feature Request - USB GPS
Replies: 7
Views: 2487

Re: Feature Request - USB GPS

[admin@MikroTik] /system resource usb> print # DEVICE VENDOR NAME SPEED 1 1:2 Prolific Technology Inc. USB-Serial Control... 12 Mbps [admin@MikroTik] /system resource usb> /port print Flags: I - inactive # NAME CHANNELS USED-BY BAUD-RATE 2 usb4 1 GPS 4800 [admin@MikroTik] /system gps> print enabled...
by QpoX
Sat Sep 19, 2009 1:51 am
Forum: General
Topic: RB750 + ROS v 4.0beta4
Replies: 1
Views: 420

Re: RB750 + ROS v 4.0beta4

The V4 beta4 is old and RB750 is quite new (it still got that new RouterBoars smell), so maybe wait until beta5 or so, is out.
by QpoX
Fri Sep 18, 2009 3:12 am
Forum: General
Topic: ZNYX ZX346Q
Replies: 7
Views: 960

Re: ZNYX ZX346Q

Get the harddrive out first, and then ghost it or make an image of it using dd on unix.
Then just install and se if it works, and if it does'nt you just restore the image...
by QpoX
Mon Sep 14, 2009 7:06 pm
Forum: General
Topic: mail server
Replies: 5
Views: 816

Re: mail server

You can run a mail server via metarouter, on ex. OpenWRT... Ignoring that RouterOS is a router and not a mail server, I would not run one via metarouter either unless your are running RouterOS x86. The simple fact is that mail servers spend a lot of time writing and deleting data from disk and woul...
by QpoX
Sun Sep 13, 2009 1:00 am
Forum: General
Topic: mail server
Replies: 5
Views: 816

Re: mail server

You can run a mail server via metarouter, on ex. OpenWRT...
by QpoX
Wed Sep 09, 2009 2:43 pm
Forum: General
Topic: Multiple routerboards on single power adapter?
Replies: 2
Views: 538

Re: Multiple routerboards on single power adapter?

Yes just more AMP's and a stable PSU and you are fine...
And run on 24-28V

About the 230V part, you just need:
Image
*This is a joke!*
by QpoX
Sun Sep 06, 2009 9:22 pm
Forum: RouterBOARD hardware
Topic: RB750 revealed!
Replies: 10
Views: 2182

Re: RB750 revealed!

Naked hardware is always good!
And thanks!
by QpoX
Sat Sep 05, 2009 11:22 pm
Forum: General
Topic: MikroTik User Meeting in USA
Replies: 39
Views: 7002

Re: MikroTik User Meeting in USA

guys, how was that? =)

where's photoz and videos? ))
Yes... pics or it didn't happen! :)
by QpoX
Mon Aug 31, 2009 4:42 am
Forum: The Dude
Topic: MY MIKROTIK PC SERVER RESTARTS AUTOMATICALLY
Replies: 6
Views: 2405

Re: MY MIKROTIK PC SERVER RESTARTS AUTOMATICALLY

1.) What version are you running?
2.) You don't need to login every time!
3.) What does the log say about the reboot? maybe set up the serial console for better logging?
4.) What type of hardware do you use?
by QpoX
Sun Aug 30, 2009 6:06 am
Forum: RouterBOARD hardware
Topic: routerOS on AR2317
Replies: 2
Views: 1038

Re: routerOS on AR2317

hey guys do u thiink is it posible to port routerOS on AR2317 SoC products??
Only RouterBoards are supported on atheros chips...
by QpoX
Fri Aug 28, 2009 9:22 am
Forum: General
Topic: ALIX board + CF card + RouterOS
Replies: 8
Views: 8424

Re: ALIX board + CF card + RouterOS

I usually connect the CF-card to a regular PC, download the ISO-image, burn to cd, boot from the cd, install on CF-card and finally move the card to my ALIX.

/Johan
Now you just make me look lazy! :)
by QpoX
Fri Aug 28, 2009 6:59 am
Forum: General
Topic: ALIX board + CF card + RouterOS
Replies: 8
Views: 8424

Re: ALIX board + CF card + RouterOS

I just used netinstall on my Soekris'...
Does the ALIX board not have the function to boot from net?
by QpoX
Sun Aug 23, 2009 7:08 pm
Forum: RouterBOARD hardware
Topic: [ask] reset rb450 ros
Replies: 14
Views: 14835

Re: [ask] reset rb450 ros

What if this doesnt work?
Then you use Netinstall...

http://wiki.mikrotik.com/wiki/Netinstall
by QpoX
Mon Aug 10, 2009 8:23 pm
Forum: General
Topic: Newsletter #19
Replies: 20
Views: 3360

Re: Newsletter #19

KUDOS for the improved speed test! And the netbook winbox! Any chance a winbox for mobile phones is in the works? Like for android or iphone or blackberry or windows mobile. (Android PLEASE!) There is about 2mill Android devices around the world... in compare there is over 46mill iPhone/iPod touch ...
by QpoX
Sat Aug 01, 2009 5:22 am
Forum: General
Topic: ups !!!!!!!!!!!!!!!!
Replies: 30
Views: 7623

Re: ups !!!!!!!!!!!!!!!!

Yeah, over here we don't have any of those lol

APC / Cyberpower / Tripplite / Belkin / Minuteman

Thats the list I come up with...
Where is "over here"?
by QpoX
Thu Jul 30, 2009 3:32 pm
Forum: General
Topic: ups !!!!!!!!!!!!!!!!
Replies: 30
Views: 7623

Re: ups !!!!!!!!!!!!!!!!

GE (General Electric) UPS' is the 2. largest on the market, and MGE is the 3. largest... IPPON is not seen as a big player around the world... they have about 35-40% of the russian market yes, but useless to the rest of us! And alot of the small players on the market use custom GE UPS'. MicroDowell ...
by QpoX
Fri Jul 24, 2009 12:15 am
Forum: General
Topic: how to change the routerboard home page ?
Replies: 7
Views: 2398

Re: how to change the routerboard home page ?

Hello, I've upgraded my routerboard to v4.0 beta3. I want to modify the home page appearing at http://192.168.1.1 (the ip address of my RB) and in particular I want to modify with a personal layout the web page layout of the webbox. How is it possible? Thanks You can foward the port to a server tha...
by QpoX
Sat Jul 18, 2009 11:58 am
Forum: General
Topic: Password recovery on router OS
Replies: 1
Views: 441

Re: Password recovery on router OS

Reinstall RouterOS and recover a backup :)
by QpoX
Sat Jul 18, 2009 11:51 am
Forum: General
Topic: ups !!!!!!!!!!!!!!!!
Replies: 30
Views: 7623

Re: ups !!!!!!!!!!!!!!!!

If such a list would exist, where do you think could we be hiding it? correct, in the manual:

http://www.mikrotik.com/testdocs/ros/3.0/ha/ups.php
Under "Specifications" the link "APC's smart protocol" is dead!
by QpoX
Thu Jul 16, 2009 12:38 pm
Forum: RouterBOARD hardware
Topic: 411R disappointment?
Replies: 36
Views: 6176

Re: 411R disappointment?

I just gave you the link! What you mean "isn't"? I see it!
People want Watt's and not dBm :)
but 20dBm = 100mW and 30dBm = 1W
by QpoX
Wed Jul 15, 2009 9:45 pm
Forum: RouterBOARD hardware
Topic: 411R disappointment?
Replies: 36
Views: 6176

Re: 411R disappointment?

I don't think that the serial port works on RB411R since the TTL chip is gone (look under the buzzer)...
But if RouterOS fails on it, the RouterBoard will be useless? or i'm a wrong on that?
by QpoX
Sun Jul 12, 2009 6:47 am
Forum: Forwarding Protocols
Topic: Point-to-point (/31) addresses
Replies: 64
Views: 41024

Re: Point-to-point (/31) addresses

Can IPIP on top of a /30 be used as a solution?
Or does IPIP also need a broadcast and network? (i've never used it before) and is just a thought!
by QpoX
Thu Jul 09, 2009 5:04 am
Forum: RouterBOARD hardware
Topic: Need help on UPS battery monitoring for routerboards
Replies: 31
Views: 8983

Re: Need help on UPS battery monitoring for routerboards

I have just emailed them to see if they ship international and what money transfers they accept.
Did the same a few days ago... still waiting :)
by QpoX
Sun Jul 05, 2009 1:19 am
Forum: RouterBOARD hardware
Topic: RB433U When ?
Replies: 15
Views: 2357

Re: RB433U When ?

Got two in today... Works GREAT !! Connected A Sprint card, USB drive and GPS module , and all are happy.. (Used a powered USB HUB to offload some of the draw fron the USB port) it is rated at up to 2A but why tax it... when a powered hub is only 15$ us.. Will be putting it thru some more testing !...
by QpoX
Sat Jul 04, 2009 1:08 am
Forum: General
Topic: TWO i386 boards and ONE UPS
Replies: 1
Views: 488

Re: TWO i386 boards and ONE UPS

You can try and split the signal to 2 serial devices from the 1 UPS...
Or get a addon card for the UPS so that i makes more outputs...
by QpoX
Fri Jun 26, 2009 1:58 pm
Forum: Wireless Networking
Topic: 3G USB Help
Replies: 2
Views: 655

Re: 3G USB Help

Hello All, I need a bit of direction. I have a new RB433UAH and would like to use my Verizon 3G (Pantech) USB modem as my internet connection. I tried scanning the forums and manuals but could not find any info on how to configure this. Any tips, pointers, links, examples or scripts would be helpfu...
by QpoX
Thu Jun 25, 2009 10:21 pm
Forum: General
Topic: Mikrotik / Bluetooth !!!
Replies: 24
Views: 8488

Re: Mikrotik / Bluetooth !!!

Playstation 3 could make a great router! :)
by QpoX
Wed Jun 24, 2009 2:04 pm
Forum: Forwarding Protocols
Topic: Point-to-point (/31) addresses
Replies: 64
Views: 41024

Re: Point-to-point (/31) addresses

No.
10.10.10.1/31 covers 10.10.10.0-10.10.10.1.
You will get a nice no route to host error with 10.10.10.1-10.10.10.2 netmask 255.255.255.254
my bad :)
by QpoX
Wed Jun 24, 2009 1:39 pm
Forum: Forwarding Protocols
Topic: Point-to-point (/31) addresses
Replies: 64
Views: 41024

Re: Point-to-point (/31) addresses

I've tried with several devices now, but there's absolutely no way, I can get /31 addresses working. Is this a bug, or is it a missing feature? For the reference: R1 (RB450): /ip address add interface=ether1 address=10.10.10.2/31 disabled=no R2 (RB450):: /ip address add interface=ether1 address=10....
by QpoX
Tue Jun 23, 2009 9:39 pm
Forum: Beginner Basics
Topic: winbox is vertically challenged
Replies: 2
Views: 1357

Re: winbox is vertically challenged

Do you run RouterOS 3.25? if not upgrade to it!
by QpoX
Mon Jun 22, 2009 12:38 am
Forum: Wireless Networking
Topic: Howto.. RB450G and Nanostation2Loco??
Replies: 1
Views: 447

Re: Howto.. RB450G and Nanostation2Loco??

Hi, i've got a RB450G and i need to make it works as an AP with Nanostation plugged in eth3.
Can anybod give me some help¿??

Thanks and regards from Spain!!
You plug it in, give the RB450G a IP and then go to the ubiquiti forum.
by QpoX
Sun Jun 21, 2009 2:33 am
Forum: Beginner Basics
Topic: need some basic regarding Mikrotik based on VMWARE
Replies: 4
Views: 1166

Re: need some basic regarding Mikrotik based on VMWARE

What version of RouterOS are you running?
by QpoX
Thu Jun 18, 2009 3:34 pm
Forum: General
Topic: Can we PLEASE leave the menu orders ALONE?
Replies: 30
Views: 5212

Re: Can we PLEASE leave the menu orders ALONE?

Menu setup pr. user account...
So that other users can be limited or arrange of what they can see using winbox.
by QpoX
Thu Jun 18, 2009 1:31 pm
Forum: Beginner Basics
Topic: Spanish, mikrotik Tutorial
Replies: 2
Views: 11261

Re: Spanish, mikrotik Tutorial

Good work! now you just need to translate it into english so that people can read it :lol:
by QpoX
Thu Jun 18, 2009 2:43 am
Forum: Beginner Basics
Topic: how to?????
Replies: 1
Views: 569

Re: how to?????

/system routerboard upgrade
by QpoX
Thu Jun 18, 2009 2:08 am
Forum: Beginner Basics
Topic: Siemens c55 for sending SMS. Is it possible?
Replies: 1
Views: 755

Re: Siemens c55 for sending SMS. Is it possible?

Can i use Siemens c55 for sending sms messages from my MT router(x86)? Now this phone is sending sms from linux server but i want to use it on MT. I tried to connect it to my router but i get this: tool sms send serial0 dst: +370xxxxxxxx message: test failure: timeout Maybe i need to restart router...
by QpoX
Mon Jun 15, 2009 7:57 pm
Forum: RouterBOARD hardware
Topic: NO free hdd space on Mikrotik RB433AH
Replies: 13
Views: 6746

Re: NO free hdd space on Mikrotik RB433AH

FWIW I just checked our RB433AH inventory and they do have 512MB of flash now instead of 64MB. I guess they quietly improved the specs. without raising the price.

Tom
does bastards! :)
by QpoX
Mon Jun 15, 2009 1:28 am
Forum: The Dude
Topic: Dude display error
Replies: 4
Views: 787

Re: Dude display error

Dude is on mikrotik router and clients are two-tree windows pc...
and it's buggy and all three computers?
by QpoX
Mon Jun 15, 2009 12:35 am
Forum: The Dude
Topic: Dude display error
Replies: 4
Views: 787

Re: Dude display error

Last night everything was ok, but this morning I have founded something wrong with my dude!
Everything is working ok, but the display is buggy. Tried export and import to another comp, but problem stayed...

Help...
it's not a bug, it's an art feature :)

are you running the dude local or external?
by QpoX
Sun Jun 14, 2009 12:52 am
Forum: RouterBOARD hardware
Topic: NO free hdd space on Mikrotik RB433AH
Replies: 13
Views: 6746

Re: NO free hdd space on Mikrotik RB433AH

now I have 28 Mbytes free of 64 - is it all right ?
Yes...
But do uninstall packages that you don't need or use...
by QpoX
Sat Jun 13, 2009 11:18 pm
Forum: RouterBOARD hardware
Topic: NO free hdd space on Mikrotik RB433AH
Replies: 13
Views: 6746

Re: NO free hdd space on Mikrotik RB433AH

/system package print

Then> /system package uninstall <package>
by QpoX
Sat Jun 13, 2009 8:56 pm
Forum: RouterBOARD hardware
Topic: NO free hdd space on Mikrotik RB433AH
Replies: 13
Views: 6746

Re: NO free hdd space on Mikrotik RB433AH

Do you have the dude installed? or any metarouters?
Just backup to external and netinstall...
by QpoX
Sat Jun 13, 2009 8:54 pm
Forum: Virtualization
Topic: Metarouter images
Replies: 365
Views: 243065

Re: Metarouter images

later today
:(
Don't worry, Normis has a timemachine...
When he finds out that he forgot it, he will go back in time and upload :)
by QpoX
Fri Jun 12, 2009 10:42 pm
Forum: Wireless Networking
Topic: Wits end HAcker missing image
Replies: 4
Views: 1025

Re: Wits end HAcker missing image

The missing jpeg and probably the most important!
Don't make a new post just for this...
by QpoX
Wed Jun 10, 2009 12:46 pm
Forum: RouterBOARD hardware
Topic: RB433UAH printer
Replies: 1
Views: 612

Re: RB433UAH printer

You can, but not with RouterOS on it!
by QpoX
Thu Jun 04, 2009 11:44 am
Forum: General
Topic: motherboard cpu temperature
Replies: 17
Views: 7169

Re: motherboard cpu temperature

almost two years of silence...
You do mean three right? :)
by QpoX
Wed Jun 03, 2009 9:22 am
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19721

Re: SMS receiving now supported, can run scripts

Anything for < 50 €? <30€?
Maybe anyone used old cellphone and it worked fine?
Did just try with my SonyEricsson T310 via serial cable, did not work :(
by QpoX
Tue Jun 02, 2009 7:29 pm
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19721

Re: SMS receiving now supported, can run scripts

Can anyone recomend some usb gsm device? I don't need anys 3g or even gprs connectivity. I want to use it only for dude sms alerts, and i want it cheap, because i don't want to waste money on 3g. but i down know shich one can go with ROS. It can be vie usb or serial cable. I have tried to connect m...
by QpoX
Mon Jun 01, 2009 11:25 pm
Forum: General
Topic: Mikrotik / Bluetooth !!!
Replies: 24
Views: 8488

Re: Mikrotik / Bluetooth !!!

you can share videos with a router?? next will be to integrate mp3 melodies and a microphone (speaker already present) and then replace your Nokia with a RouterBOARD :) I can only see the idea for Bluetooth Serial ports and connecting cellphones (Modem and SMS). But the pain of not having a 100% re...
by QpoX
Sat May 30, 2009 5:59 pm
Forum: RouterBOARD hardware
Topic: RB450 at 800Mhz
Replies: 2
Views: 833

Re: RB450 at 800Mhz

Possible: Yes
Does it work: Dunno

but why??? it runs it's best at the default 680Mhz!
by QpoX
Fri May 29, 2009 1:26 pm
Forum: RouterBOARD hardware
Topic: RB450G is here!
Replies: 41
Views: 22535

Re: RB450G is here!

Hmmm Normis,

As I plan to throw 200+ of these babies out in the field inside a bunch of manholes pretty soon, I would love a reliable voltage and temp sensor ;)

This thread is a good find, I look forward to getting my first 450G for some testing.
In manholes??? what is the function there?
by QpoX
Thu May 28, 2009 1:07 am
Forum: RouterBOARD hardware
Topic: Volts RB 1000
Replies: 10
Views: 1370

Re: Volts RB 1000

I think it is 12-28V
And RB433 runs on the same...
by QpoX
Wed May 27, 2009 8:08 am
Forum: Wireless Networking
Topic: xr9 correct freq in router os
Replies: 11
Views: 2302

Re: xr9 correct freq in router os

According to ubnt, the conversion for the XR1 card is -2200MHz. So, for 2412MHz selected in the driver, would mean 212MHz.
Do you have anything to confirm this???
by QpoX
Wed May 27, 2009 12:07 am
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19721

Re: SMS receiving now supported, can run scripts

Here is something simple... Make a script called "smsbackup" /export file=sms-backup /tool sms send usb3 004512345678 message="SMS Backup is done..." Change usb3 and 004512345678 to your cell-phone number. Then send a SMS with this :cmd 1234 script smsbackup Change 1234 to the pin set on RouterOS to...
by QpoX
Mon May 25, 2009 6:01 am
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19721

Re: SMS receiving now supported, can run scripts

i have no problem on x86.
by QpoX
Mon May 25, 2009 5:01 am
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19721

Re: SMS receiving now supported, can run scripts

Just use:
/tool sms set reader-running=no
by QpoX
Sun May 24, 2009 10:28 pm
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19721

Re: SMS receiving now supported, can run scripts

how can i tell if mikrotik installes my modem? if it is picked up and how can i test it? Just insert it in your USB port and wait a bit then look under /ports if there is something new. Mine looks like this and usb3 is my modem. And remember the settings for it (9600/8/n/1/n). [admin@dev] /port> pr...
by QpoX
Sun May 24, 2009 9:37 pm
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19721

Re: SMS receiving now supported, can run scripts

does anyone know were i can buy a gsm modem in south africa?

as i cant seem to find anything

does anyone know if it works with usb gsm modem?
It works great with USB modems... i use a Huawei E180...
http://www.pricecheck.co.za/search/?search=huawei
by QpoX
Sun May 24, 2009 8:16 pm
Forum: Beginner Basics
Topic: WAN+LAN on through the same LINK
Replies: 5
Views: 719

Re: WAN+LAN on through the same LINK

Just use EoIP, it's more easy to managed for you...

Add one EoIP for Wan (id 10) and another for Lan (id 11).
by QpoX
Sun May 24, 2009 6:55 pm
Forum: Beginner Basics
Topic: WAN+LAN on through the same LINK
Replies: 5
Views: 719

Re: WAN+LAN on through the same LINK

HI all I need some help if it possible to make this configuration: Can I use Poit-to-Point Link for WAN and for LAN in the same time. In the first RB comes main WAN Link (right RB), in the same RB comes traffic for my LAN clients in this RB there are 2 Wireless cards in 2.4 GHz. In the second RB (l...
by QpoX
Sun May 24, 2009 2:26 am
Forum: General
Topic: SMS receiving now supported, can run scripts
Replies: 45
Views: 19721

Re: SMS receiving now supported, can run scripts

Now it's possible for you to send an SMS to your router, tell it to run a script (parameters supported) and the router can even respond, as it also supports SMS sending! More here:

http://wiki.mikrotik.com/wiki/Sms
And it works like a charm!
by QpoX
Wed May 20, 2009 4:23 am
Forum: General
Topic: A simplified software for these boards.
Replies: 1
Views: 377

Re: A simplified software for these boards.

Hi

Is there any other software for the mikrotik hardware that is open source.

Thanks in advance
There is OpenWRT.
by QpoX
Mon May 18, 2009 12:49 pm
Forum: General
Topic: Hardware(CPU) problem of 1000U
Replies: 7
Views: 790

Re: Hardware(CPU) problem of 1000U

sure, but I don't think the Apple store will tell you - don't buy the macs, they break when you kick them :D Your dead right Normis.... They say "upgrade me for no apparent reason, and for the priviledge, pay twice the price, to get half the functionality of anything else" :lol: :lol: :lol: You got...
by QpoX
Sun May 17, 2009 8:12 pm
Forum: Wireless Networking
Topic: HELP!! New in wireless setup
Replies: 4
Views: 758

Re: HELP!! New in wireless setup

Just take a RB433AH (it has 3 mini-cpi slots) and use bridged or EoIP link'd to the RB1000.
by QpoX
Sun May 17, 2009 6:13 pm
Forum: General
Topic: Siemens M20 GSM modem will not send sms
Replies: 0
Views: 462

Siemens M20 GSM modem will not send sms

I have a Siemens M20 GSM modem i want to use to send sms with. But it does not work on RouterOS? I've testet it on my computer, and it works fine... but when i fireup RouterOS no go! Even on the same machine it still does not work! Any clues? or is this just a thing for support? :) And here is some ...
by QpoX
Wed May 13, 2009 12:45 pm
Forum: General
Topic: Hardware(CPU) problem of 1000U
Replies: 7
Views: 790

Re: Hardware(CPU) problem of 1000U

Previous batches of RB1000 had a problem when you kicked the device around, and were rough with it, the CPU radiator could fall off. First of all - don't kick your routers :) second - this is solved in new batches. When something does not work, you need to kick it... what else helps? :) Like when y...
by QpoX
Thu May 07, 2009 6:09 pm
Forum: General
Topic: v4.0 Feature Request(s)
Replies: 139
Views: 38406

Re: v4.0 Feature Request(s)

Improved cluster (HA) support - to have two rb450G as active/standby cluster:
- nat table (conntrack) synchronization between two boxes.
- some kind of automatic configuration replication to standby box.
i agree, redundancy on all functions.
by QpoX
Mon May 04, 2009 3:39 am
Forum: RouterBOARD hardware
Topic: HELP
Replies: 1
Views: 428

Re: HELP

Hello (F) this is the first time i see this error . i work with MikroTik RouterOS 2.9.27 everything working fine with my office . and when i take the MikroTik RouterOS to another area and the modem is the same info , i can't use my WINBOX when i search for any MAC , NO REPLAY FROM ANY INTERFACE i c...
by QpoX
Fri May 01, 2009 4:51 pm
Forum: General
Topic: Intel Atom - D945GCLF2
Replies: 1
Views: 686

Re: Intel Atom - D945GCLF2

This is from 2x RB333 and 1x RB133 to the Atom machine (i know it's not the best to test with, but it's the only routerboards i had around).
UDP:
atom_udp_from_3_rboards.png
TCP:
atom_tcp_from_3_rboards.png
by QpoX
Fri May 01, 2009 4:38 pm
Forum: General
Topic: Intel Atom - D945GCLF2
Replies: 1
Views: 686

Intel Atom - D945GCLF2

I just got this board in and it is working great! The Hardware: 1x Intel D945GCLF2 1X 2GB Kingston DDR2 PC-677 Ram 1x Mushkin 32GB SSD SATA Just some output: [admin@MikroTik] /system resource> print uptime: 3m16s version: "3.23" free-memory: 1928776kB total-memory: 1945720kB cpu: "Intel(R)" cpu-coun...
by QpoX
Tue Apr 28, 2009 8:48 am
Forum: RouterBOARD hardware
Topic: RB433U When ?
Replies: 15
Views: 2357

Re: RB433U When ?

Got two in today... Works GREAT !! Connected A Sprint card, USB drive and GPS module, and all are happy.. (Used a powered USB HUB to offload some of the draw fron the USB port) it is rated at up to 2A but why tax it... when a powered hub is only 15$ us.. Will be putting it thru some more testing !!...
by QpoX
Wed Apr 22, 2009 11:18 am
Forum: RouterBOARD hardware
Topic: New RouterBoards
Replies: 7
Views: 1302

Re: New RouterBoards

If it just had the pins i could use usb ports from a bracket:
Image

And the case only needed a USB size hole on the side with 2 screws holes...
Can a USB hub be used? of course still under the 2A limit.
by QpoX
Tue Apr 21, 2009 4:27 pm
Forum: RouterBOARD hardware
Topic: New RouterBoards
Replies: 7
Views: 1302

Re: New RouterBoards

Normis: how will the case for it be buildt? i can't really see how it would work...
Or not unless there is some extension cable between the case and board, but how about just pins on the board?
by QpoX
Tue Apr 21, 2009 4:15 pm
Forum: General
Topic: What's new in 3.23
Replies: 23
Views: 2001

Re: What's new in 3.23 (Broken 3G)

Since the upgrading to 3.23 no 3G modems work.. USB ports 1 and 2 nolonger show, log states unable to aquire serial port.

I have tested with E220's and E169's alll working correctly with 3.17..

Also tried with fresh clean install no change.

Lee
My E180 on x86 still works on 3.23!
by QpoX
Mon Apr 20, 2009 1:56 pm
Forum: General
Topic: allow only 2 ip's to view graphing tool
Replies: 4
Views: 1122

Re: allow only 2 ip's to view graphing tool

sorry for asking but what will 192.168.0.16/31 do?
Allow 192.168.0.16 + 192.168.0.17

And /30 will allow 192.168.0.16 + 192.168.0.17 + 192.168.0.18 + 192.168.0.19
/32 will just allow 192.168.0.16
by QpoX
Mon Apr 20, 2009 1:54 pm
Forum: General
Topic: hamachi server
Replies: 20
Views: 6791

Re: hamachi server

Well, you can always turn your RouterBoard into a Linux box by replacing ROS with Openwrt or Debian. Then you can install and run your own Linux apps as desired or your talent allows. Short of that, I doubt you will see Mikrotik add something like Hamachi to RouterOS. Tom MT has an amazing interfac...
by QpoX
Mon Apr 20, 2009 9:23 am
Forum: General
Topic: hamachi server
Replies: 20
Views: 6791

Re: hamachi server

When you have something like PPTP/OpenVPN and EoIP you don't really need hamachi! I've used hamachi in the past with some problems... Like: - no connection to the hamachi server. - problems with firewall on windows. - it just dies on Linux. - no data between two or more links on the same group, and ...
by QpoX
Mon Apr 20, 2009 8:40 am
Forum: RouterBOARD hardware
Topic: Intel Tolapai SOC
Replies: 3
Views: 733

Re: Intel Tolapai SOC

It is x86.
by QpoX
Mon Apr 20, 2009 8:37 am
Forum: The Dude
Topic: Help Plz
Replies: 3
Views: 675

Re: Help Plz

how can i open port on mikrotik server for upload torrnets
and if i open port must open the same one
on the router
Do you use a NAT setup?
And what do you use for a router? your question is unclear...
by QpoX
Thu Apr 16, 2009 6:04 am
Forum: RouterBOARD hardware
Topic: i can't access from wireless via winbox
Replies: 1
Views: 440

Re: i can't access from wireless via winbox

Hi pals
i still have problem with connecting from WINBOX from the wireless MOOD
I LOG FROM THE LAN
but the wireless wont accept me
:(
Try and post output from: /ip service print
by QpoX
Sun Apr 12, 2009 6:12 pm
Forum: Beginner Basics
Topic: Need help with RouterOS and P2P
Replies: 4
Views: 720

Re: Need help with RouterOS and P2P

Are you using NAT?
by QpoX
Sat Apr 11, 2009 5:31 am
Forum: General
Topic: Winbox and IPv6
Replies: 13
Views: 5082

Re: Winbox and IPv6

It would be nice to be able to enter an IPv6 IP address in Winbox and connect. i also agree! And EoIP :) Just make it all work with IPv6... Agreed. SSH, Telnet, and etc. services should be moved to IPv6 as well. Mikrotik Team: If you need developers, let me know. I'd love to be involved in making t...
by QpoX
Thu Apr 09, 2009 1:34 am
Forum: Wireless Networking
Topic: Wimax and LTE new aganist of mikrotik's WISP...
Replies: 12
Views: 3151

Re: Wimax and LTE new aganist of mikrotik's WISP...

There has been added Wimax support to the Linux Kernel since 2.6.29 So if Mikrotik add's the support to the version 4 beta, then it can be tested with Intel Wimax hardware? (x86 only?). But if there is AP software for the Wimax side of it edontknow... But why not just buy Wimax AP's and use RouterOS...
by QpoX
Wed Apr 08, 2009 1:21 am
Forum: The Dude
Topic: Just installed 3.2 ... and lost DNS resolution ...
Replies: 12
Views: 1783

Re: Just installed 3.2 ... and lost DNS resolution ...

I think you misunderstood me, I'm talking about The Dude 3.2, not anything else. It's just been released....so I cannot think it's old. My DNS servers are Windows 2003 and it was perfectly working before I upgraded my The Dude 3.1 to 3.2 less than an hour ago And of course, my DNS servers work... I...
by QpoX
Tue Apr 07, 2009 9:00 pm
Forum: The Dude
Topic: Just installed 3.2 ... and lost DNS resolution ...
Replies: 12
Views: 1783

Re: Just installed 3.2 ... and lost DNS resolution ...

3.2 is old! please install 3.22!
And what DNS servers do you use? and do they work?
plus can you ping something like google.com from the router?
And last can you ping the IP of google.com (resolv it from an other machine).
by QpoX
Fri Apr 03, 2009 1:41 pm
Forum: The Dude
Topic: dude-3.1.npk is broken!
Replies: 16
Views: 3291

Re: dude-3.1.npk is broken!

hi i can`t install dude reason the log says "broken package dude-3.1.npk" please help me......
Did you download the dude package from my link above?
by QpoX
Sat Mar 21, 2009 2:11 pm
Forum: The Dude
Topic: Vote for new DUDE features!
Replies: 117
Views: 47027

Re: Vote for new DUDE features!

Please make a Linux version
No make a version for Mac OSX!
See the problem ? :)

Just Wine it! or VMware!
by QpoX
Fri Mar 20, 2009 6:34 am
Forum: Wireless Networking
Topic: Power outage on RB1000v
Replies: 3
Views: 520

Re: Power outage on RB1000v

RouterBOOT booter 2.14 RouterBoard 1000 CPU frequency: 1333 MHz Memory size: 512 MB Press any key within 2 seconds to enter setup.. loading kernel from nand... OK setting up elf image... OK jumping to kernel code Starting... /etc/rc.d/rc.sysinit: 21: cannot create /var/run/utmp: Cannot allocate mem...
by QpoX
Fri Mar 20, 2009 6:31 am
Forum: RouterBOARD hardware
Topic: I need mikrotik with 15-16 LAN port.
Replies: 6
Views: 1303

Re: I need mikrotik with 15-16 LAN port.

Hi all! I need Mikrotik with 15 LAN. What do you advise? The scheme at work, adsl>switch>PC with OpenVPN klient. There mikrotik who works as a ADSL modem? Ideally it would be instead of the computer, ADSL-modem and switch to one mikrotik. Thx and pardon my bad English (( Get a VLAN switch and setup...
by QpoX
Tue Mar 17, 2009 4:56 pm
Forum: General
Topic: Duplicate address on both sides of EoIP bridge
Replies: 7
Views: 1133

Re: Duplicate address on both sides of EoIP bridge

Just off-topic, what did you use to make the network scheme?
by QpoX
Tue Mar 17, 2009 4:27 pm
Forum: Wireless Networking
Topic: R52H Faillure Rate Continues
Replies: 65
Views: 13565

Re: R52H Faillure Rate Continues

We have purchase 20 pieces of these cards about 2 months ago, every week we have one or two cards failing. mainly they can Receive signal but no Tx (almost zero) any idea what should we do? send to reseller or MT? We're in Malaysia and bought them from US. Thanks which cards now? R52H or R5H? Alway...
by QpoX
Sat Mar 14, 2009 7:28 am
Forum: RouterBOARD hardware
Topic: RB450G is here!
Replies: 41
Views: 22535

Re: RB450G is here!

I'm guessing it's the ethernet drivers but this board is performing worse than the 493AH with 10/100 ports. Running a TCP btest to a 493AH shows 93Mbps while the same test to a 450G shows 58Mbps.
What ethernet port did you test with on the 450G?
by QpoX
Fri Mar 13, 2009 1:26 am
Forum: Beginner Basics
Topic: how to block website
Replies: 12
Views: 34950

Re: how to block website

You can block an URL by using the Proxyserver in RouterOS...
Or just block the IP's of a website by using the firewall filter in RouterOS, and just drop trafic to that IP.
by QpoX
Tue Mar 10, 2009 2:43 am
Forum: Wireless Networking
Topic: xr9 correct freq in router os
Replies: 11
Views: 2302

Re: xr9 correct freq in router os

I think the chart is in the pdf specs.
Only for the XR9!
For XR7 the only info is "RADIO OPERATING FREQUENCY 760-780MHz".
by QpoX
Tue Mar 10, 2009 2:22 am
Forum: General
Topic: HIDE WAN IP
Replies: 4
Views: 912

Re: HIDE WAN IP

Hello,

It's possibile to hide WAN IP from public services like, DETECT MY WAN IP, etc..!!
TKS
Nope... not without a 3. party for tunneling trafic, and it's not a good solution...
But why hide?
by QpoX
Mon Mar 09, 2009 7:49 pm
Forum: Wireless Networking
Topic: xr9 correct freq in router os
Replies: 11
Views: 2302

Re: xr9 correct freq in router os

Ask UBNT to provide you with a frequency conversion chart. It's to hard for them to provide! I've requestet a chart for XR1, XR7 and XR9 with no luck! Only found a chart for XR9 on a resellers site. It's really professional... :lol: They send a XR9 frequncy chart every time I buy a card from them? ...
by QpoX
Mon Mar 09, 2009 3:30 pm
Forum: Wireless Networking
Topic: xr9 correct freq in router os
Replies: 11
Views: 2302

Re: xr9 correct freq in router os

Ask UBNT to provide you with a frequency conversion chart.
It's to hard for them to provide!
I've requestet a chart for XR1, XR7 and XR9 with no luck!
Only found a chart for XR9 on a resellers site.

It's really professional... :lol:
by QpoX
Mon Mar 09, 2009 2:01 am
Forum: RouterBOARD hardware
Topic: RB450G is here!
Replies: 41
Views: 22535

Re: RB450G is here!

Where is the micro sd slot located? i can't really see it on photos there is of it... But it sounds really nice :) The bottom side of the PCB has the microSD slot and it does fit inside the indoor case with card installed. (The slot is mounted under the smaller heat sink... you plug in the card fro...
by QpoX
Sun Mar 08, 2009 8:48 pm
Forum: RouterBOARD hardware
Topic: RB450G is here!
Replies: 41
Views: 22535

Re: RB450G is here!

Where is the micro sd slot located? i can't really see it on photos there is of it...
But it sounds really nice :)
by QpoX
Tue Mar 03, 2009 3:43 am
Forum: The Dude
Topic: dude-3.1.npk is broken!
Replies: 16
Views: 3291

Re: dude-3.1.npk is broken!

Man, package from mikrotik webpage for ppc has 0.5MB, for PC 8.1MB , isn't there something wrong ?
Try this one... it works on my system! http://www.box.net/shared/m2tr543afa
by QpoX
Tue Mar 03, 2009 2:02 am
Forum: The Dude
Topic: dude-3.1.npk is broken!
Replies: 16
Views: 3291

Re: dude-3.1.npk is broken!

MD5 file hash!

I use the PPC package with no problem!

Do people upload it with FTP or Winbox?
by QpoX
Mon Mar 02, 2009 1:29 am
Forum: Beginner Basics
Topic: Ros static ip question. plz help!!!
Replies: 15
Views: 1553

Re: Ros static ip question. plz help!!!

Bridge the two nic's and set it to use firewall...
Then set a IP (from the /25 range) and set also a route for it.

203.56.234.129/25 gw.
203.56.234.130/25 firewall ip (ip for the bridge).
203.56.234.131-253/25 for the users.
by QpoX
Mon Mar 02, 2009 12:57 am
Forum: Beginner Basics
Topic: Ros static ip question. plz help!!!
Replies: 15
Views: 1553

Re: Ros static ip question. plz help!!!

Well you could place the (box) in the middle as a firewall only and just let trafic through (firewall only, no router).
So that the /25 gets into the network where you take 1 for your self...
It's not the best solution, but should be possible.
by QpoX
Sun Mar 01, 2009 8:40 pm
Forum: Beginner Basics
Topic: Ros static ip question. plz help!!!
Replies: 15
Views: 1553

Re: Ros static ip question. plz help!!!

i have set up the RouterOS successfully. i got lots of static ip from my ISP .. its like 203.115.112.128-203.115.112.254 i used masquerade srcnat to connect to internet.. but it hide all my static ips. i can only see my routeros's ip at http://www.cmyip.com/ how can i use all my static ip address??...
by QpoX
Sun Mar 01, 2009 4:44 pm
Forum: RouterBOARD hardware
Topic: Routerboard and Untangle
Replies: 5
Views: 1080

Re: Routerboard and Untangle

Thankyou very much But i don't think that you can run it... since it will need a screencard and boot from a cdrom drive... If you are lucky, you can use a PCI screencard... but then the problem with booting from a cdrom drive! There maybe one way to do it... take another pc and install it on to a I...
by QpoX
Sun Mar 01, 2009 3:48 pm
Forum: RouterBOARD hardware
Topic: Routerboard and Untangle
Replies: 5
Views: 1080

Re: Routerboard and Untangle

You will need RouterBoard 230 since it only runs on x86 hardware...
by QpoX
Wed Feb 25, 2009 4:34 pm
Forum: General
Topic: ethernet tunneling beetween diferent ISP's
Replies: 1
Views: 411

Re: ethernet tunneling beetween diferent ISP's

Use a link via PPTP and run EoIP over it...
by QpoX
Tue Feb 24, 2009 11:54 pm
Forum: RouterBOARD hardware
Topic: Null modem Routeros installation
Replies: 14
Views: 2401

Re: Null modem Routeros installation

In that way you can upgrade only BIOS (firmware ) not OS.
Yeah i think you might be right... It's been over a year since i last used the BIOS :)
by QpoX
Tue Feb 24, 2009 8:42 pm
Forum: RouterBOARD hardware
Topic: Null modem Routeros installation
Replies: 14
Views: 2401

Re: Null modem Routeros installation

This is only from my own memory! Go to the RouterBoard BIOS and choose format NAND. Then some where in the BIOS there is a menu called "upload" or so. Choose it and choose upload via xmodem... And upload the RouterOS image via xmodem in your terminal program. Takes a lot of time and when done reboot...
by QpoX
Mon Feb 23, 2009 12:49 am
Forum: RouterBOARD hardware
Topic: Null modem Routeros installation
Replies: 14
Views: 2401

Re: Null modem Routeros installation

My ethernet ports are all dead on my RB433AH. I formatted my OS. Now I get error Kernel not found. How do I install OS with no ethernet ports? Netinstall not possible. Please help.... Why install RouterOS when all ethernet ports are dead? and how did they die? as i recall i think that you can uploa...
by QpoX
Sun Feb 22, 2009 5:10 pm
Forum: General
Topic: v4.0 Feature Request(s)
Replies: 139
Views: 38406

Re: v4.0 Feature Request(s)

I would like MT to cooperate with other vendors such as Ubiquiti for things like NSTREAM, or loading RouterOS onto their platform. (Ubnt needs to have some form of a polling protocol that is able to work with RouterOS) Many people here use MT as access points and Ubnt as the client CPE devices, but...
by QpoX
Sat Feb 14, 2009 3:13 pm
Forum: General
Topic: Mikrotik Inter Vlan Routing?
Replies: 1
Views: 1185

Re: Mikrotik Inter Vlan Routing?

Can i make Mikrotik + cisco switch as a Inter vlan routing. Like "Router On a stick"
Any one have any idea??



thnxs,
raktim
RouterOS can work like a "router on a stick".
by QpoX
Sun Feb 08, 2009 7:14 am
Forum: General
Topic: Tools to test the firewall
Replies: 6
Views: 2802

Re: Tools to test the firewall

MY friend made this service: http://miniscan.freescan.dk/
It uses nmap...

And visit http://www.freescan.dk for more info :)
by QpoX
Sat Jan 17, 2009 5:36 pm
Forum: Beginner Basics
Topic: Question about 2.4ghz n 5ghz
Replies: 4
Views: 769

Re: Question about 2.4ghz n 5ghz

Yes use 5GHz... i got big problems with flooded 2,4GHz networks...
by QpoX
Fri Jan 09, 2009 1:58 pm
Forum: Beginner Basics
Topic: GPS
Replies: 15
Views: 3067

Re: GPS

What you will need: A webserver A database A serverside programming language you can use the fetch command in ROS and use the GET function in your script on your webserver from the http header. the script logs every thing to the database... i use something similar to monitor wifi clients status (wil...
by QpoX
Fri Jan 09, 2009 9:40 am
Forum: General
Topic: 2009 and Mikrotik
Replies: 48
Views: 8704

Re: 2009 and Mikrotik

channel names? like what?
i think that he means channel numbers...
2412 (1)
2417 (2)
2422 (3)
and so on...
by QpoX
Sat Jan 03, 2009 12:38 pm
Forum: General
Topic: 2009 and Mikrotik
Replies: 48
Views: 8704

2009 and Mikrotik

What i want in 2009 from Mikrotik: RouterBoard: 1-2 USB port's (makes way for serial ports, modems, storage and a lot of other goodness). A simple way of using external leds for power, cpu and trafic (just a little pin connector, parallel with the existing leds). Maybe some I/O ports (GPIO) for temp...
by QpoX
Fri Jan 02, 2009 12:17 pm
Forum: General
Topic: Nanostation with Router OS
Replies: 2
Views: 721

Re: Nanostation with Router OS

You can load something like OpenWRT or DD-WRT on to it...
But no it's not like RouterOS :)
by QpoX
Wed Dec 17, 2008 9:30 pm
Forum: Beginner Basics
Topic: Simple Queues Does not work in 3.14 !!!!!!!!!!
Replies: 24
Views: 3692

Re: Simple Queues Does not work in 3.14 !!!!!!!!!!

Yes just disable and reboot... but is the Xen package still in the menu? try to uninstall it then...
by QpoX
Tue Dec 16, 2008 11:47 pm
Forum: RouterBOARD hardware
Topic: New RB models?
Replies: 14
Views: 2851

Re: New RB models?

it would be awesome something like rb 2000 or 10000 with some asics do hardware routing and other hardware based features like allot cisco and others, coz its incredible the allot netenforcer (slackware) can do 1gbit of traffic shaping ( layer7 ) with a 300mhz cpu. A RouterBoard that eats Cisco har...
by QpoX
Tue Dec 16, 2008 11:44 pm
Forum: RouterBOARD hardware
Topic: how to formatt router board
Replies: 3
Views: 670

Re: how to formatt router board

pls sent to a step by step on how to formatt my routerboard rb333. yhanks
Just use:
/system reset-configuration


If you need to wipe it clean for all data, use the BIOS...
by QpoX
Tue Dec 16, 2008 5:47 am
Forum: RouterBOARD hardware
Topic: RB1000 in cluster/ha setup
Replies: 5
Views: 6218

Re: RB1000 in cluster/ha setup

Yes in a way you can... ex. setup: Unit: main IP: config ip: gw1: 192.168.1.1 (and 192.168.1.3) gw2: 192.168.1.2 (and 192.168.1.4) You need to make a script that pings your main router (on the config ip) and when it fails it will set it's IP to the main IP... And when it can ping the config ip again...
by QpoX
Sat Dec 13, 2008 8:11 pm
Forum: General
Topic: TFTP
Replies: 33
Views: 14285

Re: TFTP

1. Yes
2. PXE-boot and firmware for other hardware.
3. More IPv6 fetures! (DHCP-server/client, firewall rules), IPsec, and be able to torch on IPv6.
Just make every thing work under IPv6 :)
by QpoX
Thu Dec 04, 2008 1:05 am
Forum: Scripting
Topic: maximum interface speed value
Replies: 3
Views: 876

Re: maximum interface speed value

If you setup "Graphing" it can make does values for you...
Day, Week, Month, Year.
by QpoX
Mon Nov 24, 2008 2:03 am
Forum: Beginner Basics
Topic: routerBOARD 1000
Replies: 3
Views: 922

Re: routerBOARD 1000

Is there a DHCP server running?
Download "WinBox" from mikrotik.com and connect to it via. the MAC!
Set a IP and take it from there...
by QpoX
Tue Nov 18, 2008 1:29 pm
Forum: Wireless Networking
Topic: Wi-Fi Phone
Replies: 14
Views: 2223

Re: Wi-Fi Phone

If you are lucky... But it still depens on iron in the houses and so on... I've had one where the AP was 2meters from a computer in another room and in the wall there was Aluminium foil (to keep heat in the rooms) there was no signal at all... But if you are in LOS from the phone to the AP, a 100met...
by QpoX
Mon Nov 17, 2008 7:39 pm
Forum: Wireless Networking
Topic: Wi-Fi Phone
Replies: 14
Views: 2223

Re: Wi-Fi Phone

Cool... did not know that... (Not a big Nokia fan)... and did not see your post :)
by QpoX
Mon Nov 17, 2008 5:58 pm
Forum: Wireless Networking
Topic: Wi-Fi Phone
Replies: 14
Views: 2223

Re: Wi-Fi Phone

Maybe this: http://www.solwise.co.uk/voip-phones-si680h.htm
The AccessPoint needs to be in LOS! and forget to use a Nokia phone! they only send out a few mW (as what i know of)...
But try to buy a AP and a Phone and do a test setup then change settings, antenna's and so on to improve your setup.
by QpoX
Fri Nov 07, 2008 4:04 am
Forum: RouterBOARD hardware
Topic: serial cable
Replies: 1
Views: 672

Re: serial cable

by QpoX
Sat Oct 25, 2008 1:30 am
Forum: RouterBOARD hardware
Topic: how can reset
Replies: 1
Views: 676

Re: how can reset

Use:
/system reset-configuration
by QpoX
Sat Oct 25, 2008 1:29 am
Forum: The User Manager
Topic: THE EDITING ISSUE
Replies: 1
Views: 810

Re: THE EDITING ISSUE

1. don't use caps lock!
2. ???
3. ???
4. please stick to the post where you are from!
by QpoX
Fri Oct 24, 2008 2:42 pm
Forum: RouterBOARD hardware
Topic: Routerboard
Replies: 1
Views: 677

Re: Routerboard

Use this:
/interface enable ether1
by QpoX
Tue Oct 21, 2008 10:01 pm
Forum: The User Manager
Topic: editing login page
Replies: 1
Views: 1112

Re: editing login page

Yes please spam the forums... that will help your case...
What did you edit? and where did you upload it (folder)???
And post the data of the file!
by QpoX
Mon Oct 20, 2008 12:41 am
Forum: RouterBOARD hardware
Topic: how to change a hotspot login page
Replies: 2
Views: 12380

Re: how to change a hotspot login page

Logon with Winbox or FTP...

Winbox: choose "Files" in the menu og download the folder Hotspot.
FTP: Logon with your username/password and download the Hotspot folder.

Now use your favorite text editor and change the layout.
The folder "lv" in the Hotspot folder is just an extra language...
by QpoX
Sat Oct 18, 2008 12:33 pm
Forum: General
Topic: NTP ROS for Intel x86 v3.14 is error >>> am i right ?
Replies: 3
Views: 638

Re: NTP ROS for Intel x86 v3.14 is error >>> am i right ?

You may need a firewall rule that allows NTP...
by QpoX
Fri Oct 17, 2008 8:22 am
Forum: RouterBOARD hardware
Topic: 802.11n
Replies: 26
Views: 12619

Re: 802.11n

So if the RB333 router board can handle 802.11n, why am I hearing people saying they can't wait until MikroTik will announce their support for the 9000 generation of Atheros product so they won't be stuck with just the option of LSX and alternate solutions? I hear people talking about this and I ju...
by QpoX
Thu Oct 16, 2008 8:25 pm
Forum: Beginner Basics
Topic: publish internal web server
Replies: 2
Views: 7989

Re: publish internal web server

Upgrade from 2.9.27 til the latest 2.9.xx!
by QpoX
Mon Oct 06, 2008 6:57 am
Forum: RouterBOARD hardware
Topic: 433ah current draw
Replies: 17
Views: 3671

Re: 433ah current draw

Just found it in the 333 manual!

it says 3W, can it really use that little power?

:-)
Ahh! thought you ment the board layout :)
*Lost in translation*

But yes 3W and 16W for the mini-pci slots...
If i remember correctly...
by QpoX
Mon Oct 06, 2008 6:42 am
Forum: RouterBOARD hardware
Topic: 433ah current draw
Replies: 17
Views: 3671

Re: 433ah current draw

Same as RB333
by QpoX
Mon Oct 06, 2008 1:28 am
Forum: Beginner Basics
Topic: winbox for os10?
Replies: 8
Views: 1518

Re: winbox for os10?

is there any tool like winbox for mac os10?
Nope but try and run it under Darwine. i use Winbox with Unity under VMware Fusion.
by QpoX
Mon Oct 06, 2008 1:27 am
Forum: Beginner Basics
Topic: Simple Queues Does not work in 3.14 !!!!!!!!!!
Replies: 24
Views: 3692

Re: Simple Queues Does not work in 3.14 !!!!!!!!!!

Hi, I have the same problem, (v.3.14) SQ not working, what is xen package? thanks :shock: Xen is used for virtualization so that you can run ex. more RouterOS intanses on the same machine on virtual hardware. Like VMware does it (if you better know them)... but since you don't what Xen is just unin...
  • 1
  • 2