Here's what we can decipher from the model name: Chateau Pro ax - H53UiG-5HaxQ2HaxQ-US H - Series 5 - Wired interface count 3 - 3 Wireless interfaces U - USB i - Single port power injector without a controller G - Gigabit 5 - 5Ghz H - "High" - 23-24dBm at 6Mbps 802.11a; 24-27dBm at 6Mbps ...

hi, CGGXANNX, I have a RB4011 device which has two switch chips too. I found the packet can flow between ports in different switch chips in default, no matter if vlan-filtering is enabled. So I wonder in what condition each switch chip is only able to switch VLAN traffic between ports that are on t...

Hi DarkNate, So if I want a single bridge I need to connect two ports (one of each switch chip) and probably configure them as trunk for all VLANs. Is that correct? If so, that would be a lot of unneccesary traffic going over that connection, is that what you mean by "bandwidth poor approach&q...

It's noted in the warning from MikroTik https://help.mikrotik.com/docs/display/ROS/Basic+VLAN+switching#BasicVLANswitching-Otherdeviceswithabuilt-inswitchchip that I posted above (repasted here, this time with different highlight 😋): For devices that have multiple switch chips (for example, RB2011,...

MT doesn't provide separate documentation for particular device models. Several documents do include sections, which only apply to particular hardware, but often this is indicated in a way not really obvious to users not intimately familiar with devices (e.g. often they indicate that some section a...

1. I don't know which exactly manual you're reading. But: RB4011 doesn't really belong in the group of devices mentioned. It's using RTL8367 switch chips and it didn't support VLAN switching configured by switch configuration (under /interface/ethernet/switch), the menu didn't exist. One could only...

When traffic is bridged between both switch chip port groups, there are two bottlenecks: 2.5Gbps interconnect between switch chip and CPU ... if cumulative traffic between ether ports of single switch chip and the rest of RB4011 would exceed 2.5Gbps, then this will slow things down CPU processing p...

I try to sniffer cpu-port in RB4011 , it says [admin@MikroTik] > /tool/sniffer/start interface=switch2-cpu input does not match any value of interface i tried sniffer in normal port , it works [admin@MikroTik] > /tool/sniffer/start interface=ether8 [admin@MikroTik] > /tool/sniffer/stop [admin@MikroT...

hi all, i have some questions about the forwarding in mikrotik routers 1. in some devices with 2 switch-chips such as RB4011iGS, although HW offload is enabled by default, the flow between two ports which lays in different switch chips has to walk through cpu. in such case, how to improve the throug...

Thank you all ! actrually , I wonder how CPU get the source port index from the packet in etherent routers so that L2 protocols such as STP LLDP LACP can be supported。 for example , let's look at the block diagram of RB5009UG https://cdn.mikrotik.com/web-assets/product_files/RB5009UGS_220852.png som...

i cant find relevent infomation in user manual
https://help.mikrotik.com/docs/spaces/U ... 009UG+S+IN

what about other L2 protocol such as LLDP or LACP?