The device that I trying to SSH to is a Linux server, and it was working fine before I replaced the firewall with MT.

When I try from another network (which is not routed with MT) and I can connect to that server with PuTTY.

Please advice.

Thanks.

firewall nat

chain=srcnat out-interface=wan action=masquerade

this is the only firewall nat rules in the router.

I am on MT 2.9.23, and I configured MT as basic router.

I have problem on connecting to my remote device via SSH thru PuTTY.

ANy help?

Thanks.

can anyone help me on the configuration of MT2.9.17 I had 3 NIC installed in my box, and I would like to access my PC with my public IP from outside with VNC. My network is as below: NIC1 = wan (IP: 219.xxx.xxx.xxx) NIC2 = lan (PC IP: 192.168.10.23) NIC3 = hotspot (PC IP: 10.10.10.55) How can I conf...

Sorry,

Where is this connection tracking TCP send/receive timeout located?

I have a few iGate running with Version 2.9.14.

I found in the log always have "system error critical" "login failure for user root from xxx.xxx.xxx.xxx via ssh"

What is this and how to prevent this?

I looking at the real time traffic Tx/Rx Rate under the HotSpot Active user.

so, is that rate accurate?

I found that the user profile "RATE LIMIT" at MT hotspot are not working in condition.

I can see the user can hit over there limit set in the profile. Especially for those that using routers to share their accounts!

any idea???

Another method found.

Use the User Default Profile to control each individual Radius HotSpot User transfer speed.

I just use the interface.

Because the IP address was being issued by DHCP, and we would like to control transfer speed individually.

eg,

minimun 128K for each user and control the max use of p2p.

I still new to MT, wondering the rules set in Queue Tree is applicable to all the users or every single user? I setup the QoS according to the 2.9 user manual, I not sure about the information displayed is totals usage or single user, because the traffic value show are very low. Parent=wan Packet = ...

I am running a unit of MK 2.9.12 with hotspot setup.

It was the most basic hotspot setup with no additional filtering or special rules.

Surfing internet have no problem, but all the IM was not able to be connect. (such as Yahoo! and MSN)

Any idea?

I think i found the way to solve this in MK. Just wanted to share with. To limit or cap the max upload/download speed for each hotspot user AAA with RADIUS, we can do the following 1) goto IP > HotSpot 2) Servers > Profiles 3) Set the Server Profiles "Rate Limit" Then we are done!!! easy rite? hahah...

Can we have some configuration on MK rather than on the radius? because my RADIUS server lousy.

ya, i hope i could have that attribute in my RADIUS, but it was not..

Hi, I had my box setup with Version 2.9.12, and it running with the following interface 1) WAN 2) Hotspot 3) Private LAN My hotspot users are authenticated thru RADIUS Server, and all user are with IP range of 10.10.10.2-250 on Hotspot interface How can I limit the maximum upload and download speed ...

If you don't have any DOTs in your hotspot name, try renaming it... For us "hotspot" was always slow and sometimes didn't even work... but "hot.spot" worked fine, it was something to do with the way windows was trying to use the search domain. I am having the same problem, as the BOX restarted it w...

is there anyway to import a list of Hotspot user (over 100's) into MT Hotspot?

Please help!

Can mikrotik import hotspot user list and create the hotspot account?

If yes, what is the format which MT Version support and how to import?

Thank you.

I have a MT 2.8.9 Hotspot Server running on my network, I have problem on telnet into devices behind the hotspot from External. My Public IP is 202.xxx.xxx.xxx and my temp-hotspot IP is 192.168.1.xx, real-hotspot IP is 10.0.0.xx My Device behind the hotspot is 10.1.15.xx Any idea? of how can i telne...

We had numbers of Access Point (AP) setting up on our old networks with subnet 255.0.0.0, beside changing all the AP, is better to have the Hotspot subnet changed to matching them.

Thank you and will try on your suggested.

I have an HotSpot running with MT 2.8, with a real hotspot network of 10.0.0.1/24, dhcp-pool assigning 255.255.255.0 to all my hotspot user, but I would like to have 255.0.0.0 subnet to be assigned to my user, how can I do it? and where should I making change? Please advice Mikrotik Master... Thank ...

Ability to LOCK/UNLOCK certain features access by selected Admin is necessary. So, master administrator could always disable others function beside those only needed.

thank cabana, this do not work for me, becoz i having a hotspot with DHCP in that MT machine. (those which required login) Beside, we had a few SOHO Router connected to the same interface, which i wan to setup the MAC list to allow those SOHO Router to access internet without authentication. Anyone ...

How can i set a list users with internet access based on their MAC address?

I am on Version 2.8.

Please help THX.

I had a hotspot running with temp IP & Real hotspot IP. I having problem on by-passing select user from the hot-spot Authentication. How can I create a list of VIP user which could accessing the Internet without login by limiting their Upload and Download Speed? I tried to create HotSpot Account for...