In Logging, select info, then add wireguard to it, then add the negative sign to wireguard.I'm getting endless messages 'Handshake for peer did not complete after 5 seconds, retrying (try 2)' in log.
In Logging, select info, then add wireguard to it, then add the negative sign to wireguard.I'm getting endless messages 'Handshake for peer did not complete after 5 seconds, retrying (try 2)' in log.
What was your Logging configuration to drop the warnings ??This actually appears to be new behavior as of 7.9ish, see here
Not sure whether this is just new visibility into an existing problem, or what, but it sure does saturate my logs. I had to drop radvd warnings from being logged at all
I would like to see that also. Actually,, I don't understand why Mikrotik doesn't address this as well in their Wiki.And would you mind sharing that info for others ?
Yes, I know..Still doesn't change my request though.. πWhen you open interface, you have direct button "Torch"
If I open a Tools > Torch then default is stop, I can change parameters if want and press Start.
For me WinBox works as always.
Don't believe so..Too bad though..Have they fixed it?
I cleared my cache and did as you asked. Seems to be working now.W0lt - the column order seems to stay for me, perhaps the session didn't save? What if you save it manually, are the columns ordered then?
I second that !!when will PIM-SM be fixed? it isn't working at all currently.
My sentiments exactly !!I thought the days of "fixed some stuff" were long behind Mikrotik*) other fixes and improvements;
Not knowing _exactly_ what has changed wastes a lot of customers time testing to try and discover what the Mikrotik dev's have changed.
Maybe so, but it "DOESN't" say that on the downloads page !! Overly cryptic !!Read the product pages:
You have a CCR2004-16G-2S+ so it's RouterOS v7 only.
- CCR2004-1G-12S+2XS - Size of RAM in RouterOS v6 1792MB ECC / RouterOS v7 4GB ECC
CCR2004-16G-2S+ - RouterOS (v7 only)
Thatβs not what is advertised on the downloads page. It indicates all CCR2004βs can run ROS 6.48.4 !Just as "router says" ... No.
Thanks, corrected..6.8.4? that must be from 7-8 years ago, if it existed, on what are you running it?
Really. π΅βπ«Did you not read message #25 by oskarsk?I'm seeing this myself. I try and delete columns and they just return, sometimes with additional unselected columns .
ROS 7.1rc3
Winbox 3.30
No need to add a "me too!" reply for the same fault over and over again.
As I use PIM multicast, I hope that v7.1beta7 includes that in the WinBox menu.Hi, according to what some users have commented, V7.1beta7 already exists. When will it be available for download?
Yes, and you can land there whether you want to, or not.. πI was so looking forward to the next MUM in Belarus!
I'll second that one !!!Feature request: please save the settings of the Torch window (entry timeout, collect checkmarks, filters) in the saved session so it comes up with previous settings when re-opened.
Latest stable, 6.47.2. πSo I have done this a lot of times. What version of ROS are you running. They have made improvements to the update process in newer versions.
Well, thatβs not very reassuring πIt'll probably never work, I gave up.
He simply doesn't understand us HAMS.Hi Pe1chl, (so hard just change ur nick to Pikachu
Copy that.. , Confirmed.. ThudProblem of changing column width and row position in active window (i.e. which shows counters that are being updated during the change operation) has NOT been fixed!
Back to 3.21
Ditto !!I went back to 3.21
At first things looked bright but the problems with column resizing and row movement on busy windows like firewall filter are just too severe.
What Mikrotik can do though, is to automatically add filter rules in firewall once one sets up a gre tunnel, or any tunnel dependent on gre.
Hi All,
For those having trouble with EoIP/GRE following the upgrade the below workaround worked for me:
Code: Select all/ip firewall raw add action=notrack chain=prerouting protocol=gre
That's funny since Mikrotik always shows up with Apple MacBooks at the MUM.And Mikrotik has the right to allocate dev resources wisely and not waste it on supporting every small user group... Linux, apple, unix, bsd, ...
Exactly why web interface exists!
Does this come as a pair, or do I need to purchase two?Redmor, we sell them as single units, so you can set them as you want. Yes, you can set one master and 7 slaves.
Also, no Switch Chip Vlan-Header support?I noticed that too. Are these features planned ?Switch chip currently doesn't support any rules. It is hardware or software (ROS) restrictions?
You have to go to the terminal command line to change it or display the current value. "capsman security group-key-update"From the v6.38 changelog:
*) capsman - added "group-key-update" parameter;
Confirmed, doesn't work for me either.Also from the Web Proxy Access List menu, disable & enable buttons doesn't work. Please confirm.
Thanks,
Bigfoot
I have every right to complain if the software locks up my router !!RC software is for testing purposes, do not complain if your unit doesn't boot after upgrade. If you want to be useful, try to describe your problem to mikrotik's staff, so they can find and fix the bug that caused it.
They (Roc-Noc) are such "teasers" aren't they..Just ordered the international version from Roc-Noc.
10 minutes later they called me back to tell me that can't sell it to me. "It's for export only." "No idea when the US version will be available."
That is not a native OSX application but one that is derived from "Wine". It is not as smooth as running Winbox from a actual windows machine.@StefanM, see http://forum.mikrotik.com/viewtopic.php ... 29#p530218
This problem still exists with v6.34rc14.Still having the same IPv6 DHCP issue with ROS 6.34rc9, when requesting a prefix:
Anyone else seeing this?ipv6 dhcp-c add interface=ether8 add-default-route=yes request=prefix pool-name=IPv6
Has anyone seen this before?Couldn't add New DHCPv6 Client - no request IA configured
Uh, yea...When? After the RB3011?we also have that coming:You should build antennas that could enclose the routerboards inside.
I, for one like that he new version. They seem more stable on the desktop and in vogue. Kudos to Tik!I am glad I got my hands on the 'old cased' hAP!
It fits like a charm behind my laptop screen. The new design is cumbersome.
my RB450G has below warning, is it normal or bug?
ether2-master-local excessive broadcasts/multicasts, probably a loop
previous v6.31 doesnt have such problem.
pls help to solve it. thanks
Ditto !!!Thanks Maris.The same thing as L2TP setting. It adds dynamic ipsec peer and policy based on configured local and remote address and provided ipsec secret.
Very neat feature.
I am still waiting for Mikrotik to have IPSEC VTI support
Can someone elaborate a bit on how to implement this feature?*) tunnels - eoip,eoipv6,gre,gre6,ipip,ipipv6,6to4 tunnels have new property - ipsec-secret
- for easy setup of ipsec encryption and authentication;
Hopefully, someone will describe it in greater detail at the Miami-MUM this week.What is "RoMON"
Hi Sergejs,What OS do you use for Winbox 3.0rc6?
What kind of error do you get, when it crashes?
Can someone post the rc6 change log ? I can't download it at the moment.rc6 on download page
http://download2.mikrotik.com/routeros/ ... winbox.exe
Confirmed...One more bug:
Winbox version: 3.0rc5
RouterOS version: 6.20-6.27
System => Schedule:
When add or first time open some task, I see only policy ,,FTP".
Second time open of task I see all.
Regards,
Kuba
Normis,But the columns are saved, and their order, and their selection! This is why new Winbox has the sessions
+1please fix inline comments to be globally saved in current session. everytime i logout and login to winbox some tabs (inline) are not saved and i have to press the button again.
Simple... From within Winbox, select "Tools", then "Check For Updates"...Winbox 3.0rc2 ?????? where is that?
I whole heartedly agree !!!Hope you are sure that it is capable to be working at least like v2. Otherwise take your time for testing and debugging.
When its convenient...And sometimes it takes weeks.
Well, that would be a small start...I just want "Load Previous Session" to work.
Be patient. It's normal that they don't know what changed at specified version