Community discussions

Search found 151 matches

by ihernandez
Tue Mar 28, 2017 10:20 pm
Forum: General
Topic: two ISP on a CCRS
Replies: 7
Views: 894

Re: two ISP on a CCRS

If you Need configuration Setup i will help you with it


Thank you Discmandj, I was just asking now so I can buy the CCRS. As soon as I get it, I will let you know so if I get into trouble you give me some pointers.
Best regards,

Ignacio

Gesendet von iPhone mit Tapatalk
by ihernandez
Tue Mar 28, 2017 10:12 pm
Forum: General
Topic: two ISP on a CCRS
Replies: 7
Views: 894

Re: two ISP on a CCRS

Hi if the Port 1 will be for isp 1 witch Port will be for isp 2?


for ISP 2 the port used would be 24 (for example)

Gesendet von iPhone mit Tapatalk
by ihernandez
Tue Mar 28, 2017 9:49 pm
Forum: General
Topic: two ISP on a CCRS
Replies: 7
Views: 894

two ISP on a CCRS

Hi guys, it´s been a long time since I visited last time the forum and I see that a lot has changed! congrats on every improvements for the mikrotik crew. I have a few questions about the CCRS and the switch OS I have two ISPs and would like to use the CCRS to connect ports 2 through 9 to ISP1 and p...
by ihernandez
Sat Aug 02, 2014 2:31 pm
Forum: General
Topic: enable/disable an ip address with an IF
Replies: 7
Views: 1408

Re: enable/disable an ip address with an IF

i just tried it. It worked both ways. Paste the codes in a script and run to see if it works. Manually delete the ARP entry for 10.70.3.5 and then run the script. Thanks again Skillful, I will try it again tomorrow (saturday) wary in the morning so that the traffic is lower than usual Hello Skillfu...
by ihernandez
Sat Aug 02, 2014 5:34 am
Forum: General
Topic: enable/disable an ip address with an IF
Replies: 7
Views: 1408

Re: enable/disable an ip address with an IF

i just tried it. It worked both ways.

Paste the codes in a script and run to see if it works.

Manually delete the ARP entry for 10.70.3.5 and then run the script.

Thanks again Skillful, I will try it again tomorrow (saturday) wary in the morning so that the traffic is lower than usual
by ihernandez
Fri Aug 01, 2014 12:39 am
Forum: General
Topic: enable/disable an ip address with an IF
Replies: 7
Views: 1408

Re: enable/disable an ip address with an IF

1. Create a schedule to run at 10sec interval 2. Copy and paste the script below into the "On Event" box of the schedule { :if ([/ip arp print count-only where address="10.70.3.5"]=0) do={ /ip add set [find address="10.70.1.1/30"] disable=no } else={/ip add set [find address="10.70.1.1/30"] disable...
by ihernandez
Fri Aug 01, 2014 12:10 am
Forum: General
Topic: enable/disable an ip address with an IF
Replies: 7
Views: 1408

Re: enable/disable an ip address with an IF

1. Create a schedule to run at 10sec interval 2. Copy and paste the script below into the "On Event" box of the schedule { :if ([/ip arp print count-only where address="10.70.3.5"]=0) do={ /ip add set [find address="10.70.1.1/30"] disable=no } else={/ip add set [find address="10.70.1.1/30"] disable...
by ihernandez
Thu Jul 31, 2014 9:21 pm
Forum: General
Topic: enable/disable an ip address with an IF
Replies: 7
Views: 1408

enable/disable an ip address with an IF

Hi guys, I would like to know how to make a script to be run when a specific IP address is not detected in the ARP table. For example If ip addres 10.70.3.5 in arp table is not registered then enable ip address 10.70.1.1/30 and when ip address 10.70.3.5 is detected in arp table again disable ip addr...
by ihernandez
Thu Jul 31, 2014 8:11 pm
Forum: Scripting
Topic: script to enable/disable an ip address with an IF
Replies: 2
Views: 1229

script to enable/disable an ip address with an IF

Hi guys, I would like to know how to make a script to be run when a specific IP address is not detected in the ARP table. For example If ip addres 10.70.3.5 in arp table is not registered then enable ip address 10.70.1.1/30 and when ip address 10.70.3.5 is detected in arp table again disable ip addr...
by ihernandez
Fri Jun 13, 2014 3:57 am
Forum: Forwarding Protocols
Topic: ospf with primary and secondary link (offline until needed)
Replies: 1
Views: 3078

ospf with primary and secondary link (offline until needed)

Hi guys, I have this scenario: Two sites with two wireless links, ether1 and ether4 are used on the routers. I managed to add manually in routing>ospf>interface ether4 with a cost of 10 because I want it to be the primary and the backup is ether1 with a higher cost of 100. In ip>routes my router sho...
by ihernandez
Fri Jun 13, 2014 2:13 am
Forum: Forwarding Protocols
Topic: ospf - route weighting possible?
Replies: 6
Views: 6060

Re: ospf - route weighting possible?

Hi guys, I have the same scenario. Two wireless links ether1 and ether4 to point b. I managed to add manually in routing>ospf>interface ether4 with a cost of 10 because I want it to be the primary and the backup is ether1 with a higher cost of 100. In ip>routes my router shows dst address 0.0.0.0/0 ...
by ihernandez
Sun Jun 01, 2014 8:25 pm
Forum: General
Topic: Routerboard as DNS
Replies: 4
Views: 1224

Routerboard as DNS

Hello guys, I have a RB1100AHx2 and I've been using it as a DNS server and it's working fine. However some times the response is rather slow and would like to know what could be happening. I have blocked requests from the internet and only my clients can make DNS requests. The cpu has spikes up to 5...
by ihernandez
Mon Jan 20, 2014 10:35 pm
Forum: General
Topic: Cache Flow 500 Appliance
Replies: 7
Views: 2730

Re: Cache Flow 500 Appliance

Was anyone able to get this scenario working..??

Thanks!
I got this working, sort of.... still working out some issues with bluecoat
by ihernandez
Thu Dec 05, 2013 5:47 pm
Forum: General
Topic: DNS on Mikrotik
Replies: 4
Views: 1108

Re: DNS on Mikrotik

thank you for your reply, would this be enough? /ip firewall filter add action=accept chain=forward disabled=no dst-address=xxx.xxx.xxx.xxx dst-port=53 in-interface=ether1 protocol=tcp add action=accept chain=forward disabled=no dst-address=xxx.xxx.xxx.xxx dst-port=53 in-interface=ether1 protocol=u...
by ihernandez
Thu Dec 05, 2013 4:55 pm
Forum: General
Topic: DNS on Mikrotik
Replies: 4
Views: 1108

Re: DNS on Mikrotik

thank you for your reply, would this be enough? /ip firewall filter add action=accept chain=forward disabled=no dst-address=xxx.xxx.xxx.xxx dst-port=53 in-interface=ether1 protocol=tcp add action=accept chain=forward disabled=no dst-address=xxx.xxx.xxx.xxx dst-port=53 in-interface=ether1 protocol=ud...
by ihernandez
Thu Dec 05, 2013 4:49 pm
Forum: General
Topic: DNS on Mikrotik
Replies: 4
Views: 1108

DNS on Mikrotik

Hello guys, I set up a Mikrotik as a DNS server and its working perfectly!. Now I would like to protect it from WAN queries, for example if the DNS query comes from WAN with dst to my DNS server block it.
Thank you for your help!
by ihernandez
Sat Aug 24, 2013 12:32 am
Forum: General
Topic: Looking for a mikrotik consultant
Replies: 3
Views: 801

Re: Looking for a mikrotik consultant

I have issues when the clients IP addresses are public. Do you have experience with CacheFlow?
by ihernandez
Thu Aug 22, 2013 11:49 pm
Forum: General
Topic: Looking for a mikrotik consultant
Replies: 3
Views: 801

Looking for a mikrotik consultant

Hello, I am looking for a mikrotik consultant. I am trying to implement a BlueCoat Cache Flow appliance and I need someone that knows about this and has had experience with web caching equipment.
by ihernandez
Sat Jun 08, 2013 2:32 am
Forum: General
Topic: policy based routing
Replies: 2
Views: 704

Re: policy based routing

You are right! thank you for your help
by ihernandez
Fri Jun 07, 2013 7:07 pm
Forum: General
Topic: policy based routing
Replies: 2
Views: 704

policy based routing

Hello my friends, I am having a bit of trouble with a policy based route. Here is the deal: The policy works when I use a single address just fine, but when I use a subnet it doesn't! I will post how its configured. Address List: /ip firewall address-list add address=192.168.162.111 disabled=no list...
by ihernandez
Thu Jun 06, 2013 9:00 pm
Forum: General
Topic: Cache Flow 500 Appliance
Replies: 7
Views: 2730

Re: Cache Flow 500 Appliance

Hi guys, than you for your replies!!!! I got this document from bluecoat and I need to translate this into mikrotik

Could you please help me do this?
by ihernandez
Thu Jun 06, 2013 4:47 am
Forum: General
Topic: Cache Flow 500 Appliance
Replies: 7
Views: 2730

Re: Cache Flow 500 Appliance

Hey guys!, a hint? I am not sure how or where to start and would really appreciate your help on this
by ihernandez
Wed Jun 05, 2013 7:28 pm
Forum: General
Topic: Cache Flow 500 Appliance
Replies: 7
Views: 2730

Cache Flow 500 Appliance

Hello guys, I would like to know if you could help me on this one!!! I just received a Bluecoat CacheFlow 500 appliance, super cool!!!, I assume I need a policy based routing rule in order to get this working, could you please help me? I plan to connect this appliance directly to a Routerboard 1200A...
by ihernandez
Mon Nov 05, 2012 8:58 pm
Forum: General
Topic: 3 RB1200 bricked!!!!!
Replies: 12
Views: 3962

Re: 3 RB1200 bricked!!!!!

Hello, finally I was able to recover the RB but I have to say that there may be a problem with that bactch of router boards. I purchased 3 and had to return 2 while I was in Miami because they stopped working after the upgrade. Then I tried to upgrade two and both got broken. I find this very strang...
by ihernandez
Thu Nov 01, 2012 4:21 pm
Forum: General
Topic: 3 RB1200 bricked!!!!!
Replies: 12
Views: 3962

Re: 3 RB1200 bricked!!!!!

Hi, I downloaded the firmware and I was able to upload it via hyperterminal. That is done and working. The problem now lies with netinstall. I am able to do a netinstall to other routers but with the 1200 that I am trying to unbrick it tells me that ehternet link is not present. I am getting the imp...
by ihernandez
Wed Oct 31, 2012 4:52 pm
Forum: General
Topic: 3 RB1200 bricked!!!!!
Replies: 12
Views: 3962

Re: 3 RB1200 bricked!!!!!

I am able to get into the routerboot through serial cable. It reads version 2.38. Then I hit o - boot device option in order to boot it through an ethernet port and then hit x in order to boot. Then it just stays there and throws a character and never responds again where could I get the firmware in...
by ihernandez
Wed Oct 31, 2012 3:19 pm
Forum: General
Topic: 3 RB1200 bricked!!!!!
Replies: 12
Views: 3962

Re: 3 RB1200 bricked!!!!!

Thank you for your help capital!, I will try this and let you know how it went I usually freak out when i have to upgrade a routerboard then system reboot. I procrastinate until i find i have to upgrade cause of security. I have lost my 1st Routerboard ever purchased RB1000. Then also bricked a coup...
by ihernandez
Tue Oct 30, 2012 4:02 pm
Forum: General
Topic: 3 RB1200 bricked!!!!!
Replies: 12
Views: 3962

3 RB1200 bricked!!!!!

I hope someone from mikrotik read this post quick, I purchased 3 rb1200. I opened the box, went into CLI terminal, input /system routerboard print to see if the current and the upgrade firmware was the same. It was not the same in all the routers, they were shipped that way. I hit /system routerboar...
by ihernandez
Fri Sep 21, 2012 8:40 pm
Forum: General
Topic: Routing issue
Replies: 0
Views: 279

Routing issue

Hello!, I have a routing question. I placed a mikrotik in a client with a static route dst=0.0.0.0/0 gateway=10.70.3.101. I have two sets of addresses in that router (1 set is private which I NAT) and a Public. The gateway 10.70.3.101 is part of an ospf core network. The problem is that the public a...
by ihernandez
Tue Jul 31, 2012 3:10 pm
Forum: General
Topic: wireless issue
Replies: 5
Views: 594

Re: wireless issue

NV2 is TDMA based protocol that uses the channel more aggressively. It means that in most cases you effectively rule over the channel you are using, pushing out other interferers. Give it a try anyway. I have fixed that kind of problem such way..

Thank you taduikis, I will try this !
by ihernandez
Tue Jul 31, 2012 3:07 am
Forum: General
Topic: wireless issue
Replies: 5
Views: 594

Re: wireless issue

Most likely interference. Judging by 'poll timeouts', you use nstreme? If correct, try NV2. Otherwise you might need to try changing freq. Thank you taduikis I think interference is present, tomorrow I will change the frequency and see what happens. I use nstreme, why would NV2 be better if there i...
by ihernandez
Tue Jul 31, 2012 12:37 am
Forum: General
Topic: wireless issue
Replies: 5
Views: 594

wireless issue

Hello!, I have had this link for about 2 years working flawlessly. Today it started disconnecting and throwing disconnection errors, attached you can see the errors. What could be happening and what could I do to diagnose and solve this.
by ihernandez
Wed Mar 07, 2012 2:56 pm
Forum: General
Topic: wireless performance
Replies: 3
Views: 683

Re: wireless performance

I changed the channel to 20MHz, attached you can see what I get. Theoretically I am getting more P Throughput but my Tx CCQ is not as good as in 10MHz, I see a change in signal level as well as in noise floor. When I use the Freq. Usage tool in both towers of the link, it shows nothing that could be...
by ihernandez
Wed Mar 07, 2012 3:01 am
Forum: General
Topic: wireless performance
Replies: 3
Views: 683

wireless performance

Hello guys, attached is a print screen with signal levels. The Tx varies from 78% up to 90% and the Rx varies from 95% up to 100%. The P throughput varies almost always is around 11mbit but sometimes drop down to 5mbits and goes up again to 11mbit. With these values what would be your advise to get ...
by ihernandez
Fri Feb 03, 2012 6:48 pm
Forum: Wireless Networking
Topic: OmniTIK U-5HnD 5GHz Access Point and RB/SXT 16dBi
Replies: 3
Views: 1733

Re: OmniTIK U-5HnD 5GHz Access Point and RB/SXT 16dBi

I will post results as soon as I get some tests done
by ihernandez
Fri Feb 03, 2012 4:22 pm
Forum: Wireless Networking
Topic: OmniTIK U-5HnD 5GHz Access Point and RB/SXT 16dBi
Replies: 3
Views: 1733

OmniTIK U-5HnD 5GHz Access Point and RB/SXT 16dBi

Hello guys, I would like to ask you if this is possible or if any of you have had a similar experience. There is a glass building where possible clients have internet needs and called me (I own a small WISP). 500 meters away (aprox 1500ft) I have a node and could install a omnitik AP. The question i...
by ihernandez
Fri Aug 26, 2011 8:53 pm
Forum: General
Topic: 4G USB modem on mikrotik router
Replies: 1
Views: 769

4G USB modem on mikrotik router

Hello, I am starting to deploy 4G airspan wimax equipment and would like to know if there is any drivers support for USB modems produced by greenpacket.com. The goal is to be able to install an USB modem on an USB capable mikrotik.
Please let me know if there is any information on this scenario
by ihernandez
Mon Jul 25, 2011 4:31 pm
Forum: Wireless Networking
Topic: MAC ping vs regular ping
Replies: 4
Views: 927

Re: MAC ping vs regular ping

What is % of the loss? And have you tried pinging with size=500, 1000, 1450? Does the loss grow with packet size? :)
Hello dasiu, the % of the loss is about 1%, for size 500 and 1000, for 1450 it goes up to 4%.
by ihernandez
Mon Jul 25, 2011 2:54 pm
Forum: Wireless Networking
Topic: MAC ping vs regular ping
Replies: 4
Views: 927

Re: MAC ping vs regular ping

Any chance that the IP address has been moved to the wrong interface? Its a really hard thing to troubleshoot from one line like that, what happens if you Mac-Telnet and reboot both sides? Have you done any hardware changes Firmware updates or so forth? Hello CyberT, I have rebooted both sides and ...
by ihernandez
Mon Jul 25, 2011 2:04 pm
Forum: Wireless Networking
Topic: MAC ping vs regular ping
Replies: 4
Views: 927

MAC ping vs regular ping

Hello guys, I am having an odd problem. I have a healthy wireless point to point wireless link ( signal -58, signal to noise -37, ccq 99%/100%, nstreme enabled, xr5 cards) the link has been working perfectly for the last year. Now I am having an odd behavior, when I ping from router a to router b (a...
by ihernandez
Tue Feb 01, 2011 5:17 pm
Forum: General
Topic: hotspot
Replies: 1
Views: 357

hotspot

Hello guys, I have installed a radius server and I have centralized authentication for hotspot users. When users login a dynamic simple queue is created with its specified speeds. What I would like to be able to do is to limit the amount of maximum bandwidth that all the users will use in total. For...
by ihernandez
Wed Dec 15, 2010 6:08 pm
Forum: Forwarding Protocols
Topic: MPLS over wireless interface bug??
Replies: 1
Views: 904

Re: MPLS over wireless interface bug??

Interesting.... now I configured two 750G on v5rc5 (eth connected) and MPLS does not work. I tried dynamic / static neighbors.... all interfaces on a specific MTU and individually telling the router which interface had which MTU. I tried attaching supout.rif for mikrotik support but it is not possib...
by ihernandez
Wed Dec 15, 2010 2:51 pm
Forum: Forwarding Protocols
Topic: MPLS over wireless interface bug??
Replies: 1
Views: 904

MPLS over wireless interface bug??

Hello!!, I am having trouble with MPLS. If implemented on eth interfaces it works perfectly, if its configured over a wireless interface it does not work, when I say it doesnt work I mean the two routers communicate to each other but when I try to communicate from a pc going through both routers to ...
by ihernandez
Wed Dec 08, 2010 4:08 pm
Forum: General
Topic: hotsp spot and internal traffic
Replies: 1
Views: 414

hotsp spot and internal traffic

Good day everyone!, I am attaching a diagram of what I wish to accomplish. Its very simple, I wish to limit the speed to access internet per user with hotspot. I have several servers in my LAN and I do not wish to have my hotspot control the speed to which I connect to my servers (file server, apps ...
by ihernandez
Tue Nov 23, 2010 3:57 am
Forum: General
Topic: [Solved] VRRP: Bug in ROS 4.11
Replies: 18
Views: 4165

Re: [Solved] VRRP: Bug in ROS 4.11

Just upgraded one of my routers in a VRRP cluster to 4.13 and get the same issue, change the priority and it turns to invalid :-( And there is no firewall rule blocking access to the router? If you are unsure, try disabling the firewall and change priorities once again. I just checked: It really is...
by ihernandez
Mon Nov 22, 2010 11:15 pm
Forum: General
Topic: Hotspot Centralized Authentication
Replies: 2
Views: 625

Re: Hotspot Centralized Authentication

Any with a license level 4. A 750G should be able to handle 40 clients that only log in occasionally just fine, a 450G could definitely do it, anything above can, too.
Thank you fewi, +karma to you
by ihernandez
Mon Nov 22, 2010 11:13 pm
Forum: General
Topic: [Solved] VRRP: Bug in ROS 4.11
Replies: 18
Views: 4165

Re: [Solved] VRRP: Bug in ROS 4.11

I am having the very same issue, I opted to work with netwatch and enable/disable routes. VRRP on mikrotik has given us a lot of headaches.... :-? :-? :-?
by ihernandez
Mon Nov 22, 2010 10:46 pm
Forum: General
Topic: Hotspot Centralized Authentication
Replies: 2
Views: 625

Hotspot Centralized Authentication

Hello guys, I am attaching a simple diagram to what I would like to be able to do. The question is simple:

Which routerboard model should I use in this setup?
by ihernandez
Fri Nov 19, 2010 4:57 am
Forum: General
Topic: VRRP serious BUG!?
Replies: 13
Views: 4560

Re: VRRP serious BUG!?

Hello, I am running into this very same behvior. I have two routers with vrrp, everything goes according to plan but when I test the vrrp (I unplug cables and then plug them back in) all hell breaks loose!, both routers go to RM and nothing works. I am running ver 4.13 on a x86 platform.
Help...
by ihernandez
Sun Sep 05, 2010 2:49 am
Forum: General
Topic: Compact Flash for ROS
Replies: 6
Views: 1002

Re: Compact Flash for ROS

Great, how about lifespan and speed for the compact flash?
by ihernandez
Sat Sep 04, 2010 6:17 pm
Forum: General
Topic: VLAN trunk / tagged port problem
Replies: 5
Views: 2255

Re: VLAN trunk / tagged port problem

From my understanding, you wish to connect clients to a specific VLAN. If you're not sure or wish not to configure VLANs on the clients PCs and devices you should use untagged VLANs on the ports that connect directly to your clients. I hope this helps
by ihernandez
Sat Sep 04, 2010 4:52 pm
Forum: General
Topic: Compact Flash for ROS
Replies: 6
Views: 1002

Compact Flash for ROS

Hello guys, I would like to know what are your thoughts / experiences on using a Compact Flash card for loading ROS on an x386 architecture. The reason for me to think about doing this is lower power consumption (currently I am using a p4 with a large power supply) and small footprint but high proce...
by ihernandez
Thu Aug 19, 2010 3:30 am
Forum: General
Topic: RB411AH ver. 5.0beta5 100% use cpu
Replies: 6
Views: 1073

Re: RB411AH ver. 5.0beta5 100% use cpu

Now I upgraded a second one in order to see if the first one is a faulty router board and It has the same problem!!!

I now have two RB411AH with v5.0 and have CPU 100%!!
by ihernandez
Wed Aug 18, 2010 5:56 pm
Forum: General
Topic: Logs
Replies: 1
Views: 368

Logs

Hello my friends! I have a question. I am doing remote logging from my RB's to a dude server. I see that there are levels of details for logs but I haven't found a way to log detailed things, for example I would like to know which is the number of the simple queue I changed and what I changed or may...
by ihernandez
Fri Aug 06, 2010 12:01 am
Forum: General
Topic: RB411AH ver. 5.0beta5 100% use cpu
Replies: 6
Views: 1073

Re: RB411AH ver. 5.0beta5 100% use cpu

Hello my friends I upgraded to 5beta5 a 411AH that I use on a point to point link. The only thing I have implemented in that router board is OSPF. Eventhough currently I am not passing traffic through this link the CPU usage goes to 100%. What do you think ? Would a supout help? Anyone from Mikroti...
by ihernandez
Thu Aug 05, 2010 1:17 am
Forum: General
Topic: RB411AH ver. 5.0beta5 100% use cpu
Replies: 6
Views: 1073

Re: RB411AH ver. 5.0beta5 100% use cpu

Please anyone from mikrotik who could help me?
by ihernandez
Wed Aug 04, 2010 7:42 pm
Forum: General
Topic: Bandwidth & QoS.
Replies: 3
Views: 868

Re: Bandwidth & QoS.

Does anyone know where I can get a good tutorial/documentation about bandwidth/QoS?
Hello elarrarte, you could start here http://wiki.mikrotik.com/wiki/Category:QoS in the wiki there is a lot of useful information.
by ihernandez
Wed Aug 04, 2010 7:31 pm
Forum: General
Topic: RB411AH ver. 5.0beta5 100% use cpu
Replies: 6
Views: 1073

RB411AH ver. 5.0beta5 100% use cpu

Hello my friends I upgraded to 5beta5 a 411AH that I use on a point to point link. The only thing I have implemented in that router board is OSPF. Eventhough currently I am not passing traffic through this link the CPU usage goes to 100%. What do you think ? Would a supout help?
by ihernandez
Mon Jul 26, 2010 10:55 pm
Forum: General
Topic: New wireless protocol: Nv2 in v5.0beta5
Replies: 217
Views: 78238

Re: New wireless protocol: Nv2 in v5.0beta5

I just wish to know if I can use XR5 cards
by ihernandez
Wed Jun 23, 2010 8:12 am
Forum: General
Topic: SCSI and SAS support in RouterOS
Replies: 102
Views: 31963

Re: SCSI and SAS support in RouterOS

Did anyone test the drivers?, I do not have available Dell servers so I can't test but Normis is right it appears nobody is testing so far
by ihernandez
Wed May 26, 2010 3:10 pm
Forum: Wireless Networking
Topic: TDMA - what's ahead?
Replies: 7
Views: 3052

Re: TDMA - what's ahead?

Any news about TDMA? this would be goooooood!
by ihernandez
Tue May 11, 2010 3:24 pm
Forum: Wireless Networking
Topic: XR2 2.3ghz
Replies: 2
Views: 730

Re: XR2 2.3ghz

This would be interesting to know, anyone knows?
by ihernandez
Sat May 08, 2010 2:30 pm
Forum: Beginner Basics
Topic: Mikrotik Learning Book
Replies: 24
Views: 36434

Re: Mikrotik Learning Book

Hello guys, any thoughts about learning ros book?
by ihernandez
Sat Apr 17, 2010 2:20 pm
Forum: General
Topic: Bandwidth test tcp disconnected
Replies: 1
Views: 644

Re: Bandwidth test tcp disconnected

I am having the same problem in 4.6, maybe a bug?
by ihernandez
Thu Apr 15, 2010 2:59 pm
Forum: General
Topic: CCQ: 3 miles point to point link
Replies: 6
Views: 766

Re: 3 miles point to point link

100% is not possible, your value is very good. Hello Normis and thanks for your reply!. I have to disagree with you on that since I have 2 links that show almost steady tx/rx CCQ 100% (the links are 11km and 15km). If you state that 100% is not possible, which would be the range for bad CCQ, ok CCQ...
by ihernandez
Thu Apr 15, 2010 12:54 am
Forum: General
Topic: CCQ: 3 miles point to point link
Replies: 6
Views: 766

Re: 3 miles point to point link

please?
by ihernandez
Wed Apr 14, 2010 6:29 pm
Forum: Wireless Networking
Topic: Unable to display status pop-up when pop-ups are blocked
Replies: 1
Views: 477

Re: Unable to display status pop-up when pop-ups are blocked

Any thoughts guys, this is a great point to know.
by ihernandez
Wed Apr 14, 2010 2:37 pm
Forum: General
Topic: CCQ: 3 miles point to point link
Replies: 6
Views: 766

Re: 3 miles point to point link

Any ideas please?
by ihernandez
Wed Apr 14, 2010 12:54 am
Forum: General
Topic: CCQ: 3 miles point to point link
Replies: 6
Views: 766

CCQ: 3 miles point to point link

Hello I will first state my equipment: 2 x XR5 @ default power 2 x 29 dBi parabolic antennas 2 x 411ah RB 2 x 18 volt power supply and PoE Having said this, I cant get the CCQ to get steady up to 100% please see attachment so you'll know noise floor etc I have swapped all components to see if I had ...
by ihernandez
Wed Apr 07, 2010 2:07 am
Forum: General
Topic: License question *URGENT*
Replies: 2
Views: 425

License question *URGENT*

Hello guys, something happened to my router. Its in production hence urgent in the message title!.

I logged into my rb433 and it gave me this error!! see the print screen!

What do I do!? the rb is in production!!!

I already followed the instructions and nothing changed
by ihernandez
Mon Mar 15, 2010 1:20 pm
Forum: Wireless Networking
Topic: is this link possible?
Replies: 7
Views: 994

Re: is this link possible?

I think its possible too, I would be using XR5 and 33.4 dBi antennas which should give me a signal level at the RX site of -62.20 dBm

What do you think guys?
by ihernandez
Mon Mar 15, 2010 12:44 am
Forum: Wireless Networking
Topic: is this link possible?
Replies: 7
Views: 994

is this link possible?

Hello guys, I would like to listen to your oppinions on this link: Point A Latitude 10°32'25.76"N Longitude 66°52'51.45"W Point B Latitude 11°47'21.53"N Longitude 66°36'42.09"W The link is 150Km in length, point A is a very high mountain about 2000 mts above sea level and point B is an island with a...
by ihernandez
Sat Feb 06, 2010 5:29 pm
Forum: General
Topic: bandwidth managment for clients
Replies: 4
Views: 644

Re: bandwidth managment for clients

Thank you very much!, I will try this.
by ihernandez
Sat Feb 06, 2010 4:19 am
Forum: General
Topic: bandwidth managment for clients
Replies: 4
Views: 644

Re: bandwidth managment for clients

Thank you for your response, what would you recommend for me to do if now I need to restrict my clients speeds. Both residential (broadband) and companies (dedicated speeds)
by ihernandez
Thu Feb 04, 2010 6:20 pm
Forum: General
Topic: bandwidth managment for clients
Replies: 4
Views: 644

bandwidth managment for clients

Hello guys, here is a print screen of a queue tree that I made in order to give priorities to different services. I do not know if this is the best way to do it so I would like to know what you think. On the other hand, I would like to do the same on the simple queues area but instead of priorities ...
by ihernandez
Thu Jan 14, 2010 11:51 pm
Forum: General
Topic: 2 ISP's
Replies: 15
Views: 2448

2 ISP's

Hello my friends I have two ISP's and both converge in my RB1000. What I wish to do is to force a specific subnet tha is in another node to find internet through the ISP I wish. For example, ISP A is used for dedicated internet access for companies. ISP B is used for residential internet access (Bot...
by ihernandez
Wed Jan 13, 2010 8:47 pm
Forum: General
Topic: DNS Server
Replies: 4
Views: 614

Re: DNS Server

Yes. http://wiki.mikrotik.com/wiki/DNS To block outside access, simply add a firewall rule like this: /ip firewall filter add chain=input in-interface=<your WAN interface> protocol=udp dst-port=53 action=drop To block access to udp/53 via the WAN interface. Make sure you accept established/related ...
by ihernandez
Wed Jan 13, 2010 6:08 pm
Forum: General
Topic: DNS Server
Replies: 4
Views: 614

Re: DNS Server

what functionality do you need from DNS?
Only basic functions, name resolution and DNS caching
by ihernandez
Wed Jan 13, 2010 5:06 pm
Forum: General
Topic: DNS Server
Replies: 4
Views: 614

DNS Server

Hello wise people!, I have a question for you:

I would like to know if its possible to use a routerboard with router os to substitute temporarily a DNS server. If the answer is yes, how would I do it and how would I protect it from being used outside my network.
by ihernandez
Tue Dec 08, 2009 11:49 pm
Forum: RouterBOARD hardware
Topic: VLANs VLANs VLANs!!!
Replies: 5
Views: 1145

Re: VLANs VLANs VLANs!!!

Connect the ethernet interface of a RouterOS device to another device that does dot1q. Create a VLAN interface with the ethernet port as the parent, and apply the VLAN id you want (like creating a dot1 sub-interface on a Cisco router). Traffic from the VLAN network will go out the ethernet interfac...
by ihernandez
Tue Dec 08, 2009 11:32 pm
Forum: RouterBOARD hardware
Topic: VLANs VLANs VLANs!!!
Replies: 5
Views: 1145

Re: VLANs VLANs VLANs!!!

Yes, the user service tag is q-in-q.
Hello fewi, thanks again. How do I tag a vlan in mikrotik?
by ihernandez
Tue Dec 08, 2009 11:16 pm
Forum: RouterBOARD hardware
Topic: VLANs VLANs VLANs!!!
Replies: 5
Views: 1145

VLANs VLANs VLANs!!!

Hello wise crowd!, I seek your help. I setup my mikrotik with VLAN 77 on it's eth1 as you can see on diagrams B and C and a WiMAX cell with VLAN 77 on its ethernet port (tagged only). If I check User Service Tag on my mikrotik VLAN (dawing B) the communication is lost, if I uncheck the User Service ...
by ihernandez
Mon Dec 07, 2009 11:47 pm
Forum: RouterBOARD hardware
Topic: Simple firewall question
Replies: 3
Views: 608

Re: Simple firewall question

Thank you fewi, it worked perfect!!!
by ihernandez
Mon Dec 07, 2009 11:10 pm
Forum: RouterBOARD hardware
Topic: Simple firewall question
Replies: 3
Views: 608

Re: Simple firewall question

Make an address-list containing the IPs of clients not permitted internet access, then drop packets from those clients out the WAN interface. /ip firewall access-list add list=no_internet address=10.2.0.0/24 add list=no_internet address=10.3.0.0/24 /ip firewall filter add chain=forward out-interfac...
by ihernandez
Mon Dec 07, 2009 10:38 pm
Forum: RouterBOARD hardware
Topic: Simple firewall question
Replies: 3
Views: 608

Simple firewall question

I have a client and he has two services with me. One is Internet Access and the other is data between 4 offices. For internet access he uses public IPs and for data between offices he will use private IPs I would like to block the private IPs of that client from internet access. How would I do that.
by ihernandez
Fri Sep 11, 2009 6:54 pm
Forum: RouterBOARD hardware
Topic: VLAN configuration
Replies: 3
Views: 893

Re: VLAN configuration

Thank you for your response fewi, I will review the link you sent.
Any comments from Mikrotik???
by ihernandez
Thu Sep 10, 2009 8:36 pm
Forum: RouterBOARD hardware
Topic: VLAN configuration
Replies: 3
Views: 893

VLAN configuration

Hello, I have managed to configure VLAN's in mikrotik and between mikrotik and mikrotik they work as intended, my headaches start when I introduce a switch. I am using a 3com 2226 plus and I can make them talk through VLAN but the behavior is strange. I will post later on today some of my problems, ...
by ihernandez
Wed Jun 03, 2009 5:59 pm
Forum: General
Topic: Router OS on dell poweredge 850
Replies: 1
Views: 462

Router OS on dell poweredge 850

I am about to buy dell used servers to load Router OS. The server processor is Intel CPU: 1x 64 Bit Intel Pentium D/830 Dual Core 3.0GHz / 2MB Cache / 800FSB My question is: Will I have trouble using ROS on this server because its 64bit, I know I wont use efficiently the processor since its a 64bit ...
by ihernandez
Wed Jun 03, 2009 5:36 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 288681

Re: 802.11n

Hello, I would like to know if I can use this cards with external dish antennas for point to point links
by ihernandez
Tue May 19, 2009 5:04 pm
Forum: RouterBOARD hardware
Topic: Hotspot centralized authentication
Replies: 3
Views: 2166

Re: Hotspot centralized authentication

Set for the /radius configuration, 10.70.1.70 instead of 10.5.50.1 What do you see on the HotSpot logs ? Hello sergejs, I tried this before and I am able to authenticate but I dont go through the router itself after I authenticate. What I mean is that I am not controlled by the central hotspot serv...
by ihernandez
Mon May 18, 2009 5:38 pm
Forum: RouterBOARD hardware
Topic: Hotspot centralized authentication
Replies: 3
Views: 2166

Hotspot centralized authentication

Hello guys! I have installed hotspot and user manager on a PC L6 ROS. I have read all the wiki articles about centralized authentication with hotspot and user manager but still cant make it work. Please help. Here are some configurations from both USR manager and client router, in my network I use O...
by ihernandez
Wed May 13, 2009 3:28 am
Forum: RouterBOARD hardware
Topic: Layer 7 and RB433
Replies: 1
Views: 546

Layer 7 and RB433

Hello guys, I would like to know if I can use layer 7 on a rb433 without killing its processor. If rb433 hasn't enough juice, which one would you use.
by ihernandez
Fri May 08, 2009 7:46 pm
Forum: RouterBOARD hardware
Topic: queue suggestions
Replies: 2
Views: 666

Re: queue suggestions

Any thoughts please?
by ihernandez
Wed May 06, 2009 10:54 pm
Forum: RouterBOARD hardware
Topic: queue suggestions
Replies: 2
Views: 666

queue suggestions

Hello guys, I seek your wisdom!. I have a queue tree that gives me priority to different kinds of traffic, here is the tree: /queue tree add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=256000 max-limit=500000 name=winbox_in packet-mark=winbox_in parent=global-in \ priority=1 q...
by ihernandez
Thu Apr 30, 2009 5:04 pm
Forum: RouterBOARD hardware
Topic: Hotspot DNS cache server
Replies: 3
Views: 2184

Re: Hotspot DNS cache server

Make sure you have configured two DNS servers to /ip dns set primary-dns= secondary-dns= To reply for remote DNS requests set /ip dns set allow-remote-requests=yes Add redirect NAT rule for DNS traffic (port 53, protocol UDP and TCP), /ip firewall nat add action=redirect chain=dstnat dst-port=53 pr...
by ihernandez
Wed Apr 29, 2009 6:48 pm
Forum: RouterBOARD hardware
Topic: Hotspot DNS cache server
Replies: 3
Views: 2184

Hotspot DNS cache server

Hello guys!, I have a hotspot server on my network and I installed a DNS cache server on it. I would like the hotspot users and non hotspot users to be able to access the cache server on that router. How can I do that?, I think its a simple rule on that server (Firewall rule) but I dont know how to ...
by ihernandez
Fri Apr 24, 2009 6:21 pm
Forum: RouterBOARD hardware
Topic: Queuetree with mangle question
Replies: 0
Views: 391

Queuetree with mangle question

I have a question about implementing correctly mangle/queue tree bandwidth management. I have this mangle on my firewall: 4 ;;; Client 1 UL chain=prerouting action=mark-packet new-packet-mark=client1_u passthrough=yes src-address=172.16.6.8/30 5 ;;; Client 1 DL chain=prerouting action=mark-packet ne...
by ihernandez
Fri Apr 24, 2009 4:00 pm
Forum: RouterBOARD hardware
Topic: 15 Km link
Replies: 3
Views: 984

15 Km link

Hello guys, I would like to share my latest link, it's a 15km point to point link made with XR5, RB433, Dish antenna 29 dbi. This so far is the best link I have in terms of CCQ and quality of wireless link. I would like to know how could I optimize it in terms of data throughput.
by ihernandez
Fri Apr 24, 2009 3:49 pm
Forum: RouterBOARD hardware
Topic: Mangle
Replies: 4
Views: 820

Re: Mangle

Thank you for your reply!, I will try this and let you know how it went Then you can do the same in Mangle. Just add the subnet to the source IP. Optionally (if you want to mark more subnets together) you can create an address list in IP/Firewall/Address List and refer to that list in Mangle/Advance...
by ihernandez
Thu Apr 23, 2009 8:04 pm
Forum: RouterBOARD hardware
Topic: Mangle
Replies: 4
Views: 820

Re: Mangle

Thank you for your reply but I need this to be a part of a queue tree.

Sure you can... But if you want to use simple queue, not even mangle is necessary, you can just create a simple queue with a limit and set the subnet as the source IP.
by ihernandez
Thu Apr 23, 2009 7:38 pm
Forum: Forwarding Protocols
Topic: Troubles with OSPF ROS 3.22 and 2.9.51
Replies: 2
Views: 1958

Re: Troubles with OSPF ROS 3.22 and 2.9.51

Hello telematics09, I was having the same problem however I was using ROS v3.22 and v3.10. I solved it by upgrading all routers to v3.22

I hope this helps
by ihernandez
Thu Apr 23, 2009 7:27 pm
Forum: RouterBOARD hardware
Topic: Mangle
Replies: 4
Views: 820

Mangle

Hello guys, I would like to know if I can mark packets on a group of IP addresses. For example I have a xxx.xxx.xxx.xxx/40 on a router and would like to mark their packets in order to control their bandwidth. the setup is like this (bandwidth control) Subscriber module canopy <-----------> AP canopy...
by ihernandez
Thu Feb 26, 2009 11:24 pm
Forum: RouterBOARD hardware
Topic: signal difference in point to point
Replies: 3
Views: 746

Re: signal difference in point to point

ihernandez - Sure - there are a number of reasons..... Bad cable(s) or connections at the card(s). Bad cable connection from the card to the antenna (bad cable-loose ground, water intrusion, etc). Antenna damage. LoS issues, such as 'knife edge defraction', or an obstacle closer to one antenna than...
by ihernandez
Wed Feb 25, 2009 5:18 pm
Forum: RouterBOARD hardware
Topic: signal difference in point to point
Replies: 3
Views: 746

signal difference in point to point

Hello, I would like to know if you could help me with this issue. On one side I have an ok signal level (good ccq 75% to 81%) and on the other I have a weak signal (see print screen)
I use XR5 on both ends I just changed them to make sure it wasn`t the cards.
by ihernandez
Sat Feb 21, 2009 4:11 pm
Forum: RouterBOARD hardware
Topic: Centralized user manager authentication
Replies: 2
Views: 728

Re: Centralized user manager authentication

Any thoughts guys?
by ihernandez
Thu Feb 19, 2009 5:08 pm
Forum: RouterBOARD hardware
Topic: Centralized user manager authentication
Replies: 2
Views: 728

Centralized user manager authentication

Hello, I would like help here guys!. I haven't started this project but this is what I would like to have: A centralized user manager - This router os would be installed on a dedicated machine (IBM server) A series of wireles point to point links - I use only Mikrotik for wireless links and routers ...
by ihernandez
Thu Jan 15, 2009 2:27 pm
Forum: RouterBOARD hardware
Topic: Ubiquiti XR3
Replies: 1
Views: 577

Re: Ubiquiti XR3

Any thoughts guys?
Really need feedback because I have seen in other posts that the xr3 are prone to damage due to static
by ihernandez
Tue Jan 13, 2009 4:33 pm
Forum: RouterBOARD hardware
Topic: Ubiquiti XR3
Replies: 1
Views: 577

Ubiquiti XR3

Hello and happy new year guys!
I would like to know what experience has any of you had with the Ubiquiti XR3. I am planning on buying a lot of 100 of this cards but would like to know what you think of them in combination with mikrotik RB 433 and a cpe RB.
by ihernandez
Tue Dec 02, 2008 1:59 pm
Forum: RouterBOARD hardware
Topic: 15 km link
Replies: 7
Views: 1094

Re: 15 km link

23dBi patch antennas are good till 10km
How about 22 dBi grill antennas, both the grilled and the patch are hyperlinktech
by ihernandez
Mon Dec 01, 2008 6:41 pm
Forum: RouterBOARD hardware
Topic: 15 km link
Replies: 7
Views: 1094

15 km link

Hello guys!, I need a little help here. This is my setup. On each side I have: one rb433, patch antenna (23dbi), 1m LMR 400 cable and SR5 running on 5300 MHz. The thing is that the signal strength is too weak. According to my calculations I should be getting around -82 and the according sensibility ...
by ihernandez
Fri Nov 07, 2008 6:06 pm
Forum: RouterBOARD hardware
Topic: improve ccq
Replies: 6
Views: 6002

Re: improve ccq

THe ccq has improved over time by itself. However I see that the pings are 1ms and 2ms but it has occasional spikes up to 200ms, what could provoke this behavior.
by ihernandez
Fri Nov 07, 2008 1:13 am
Forum: RouterBOARD hardware
Topic: serial cable
Replies: 1
Views: 680

serial cable

Hello, is there a diagram to make from scratch a serial cable in order to access the routerboard to reset it?
by ihernandez
Fri Nov 07, 2008 12:02 am
Forum: RouterBOARD hardware
Topic: improve ccq
Replies: 6
Views: 6002

improve ccq

Hello I have an 9 km link with one solid dish 29dbi on each location. The wireless card I use is an SR5 on default tx power, and for routerboard I use RB433. Attached is a printscreen of my throughput (which I am happy with). I would like to know which tweaks (if any) I could use to get a better CCQ...
by ihernandez
Tue Nov 04, 2008 2:31 pm
Forum: General
Topic: Queue modification
Replies: 2
Views: 526

Re: Queue modification

Thank you Normis, I will try that
by ihernandez
Tue Nov 04, 2008 12:36 am
Forum: General
Topic: Queue modification
Replies: 2
Views: 526

Queue modification

Hello, I would like to know how can I schedule a change on a simple queue:

For example, I have a simple queue that has a target dowload/upload of 1mb and on a certain hour of the day I would like to change it to 3mb.

Thank you for your help
by ihernandez
Tue Oct 21, 2008 6:57 pm
Forum: RouterBOARD hardware
Topic: Best Mikrotik configuration
Replies: 4
Views: 2951

Re: Best Mikrotik configuration

where is ANI in advance tab...i cant see the premabe type but i m not abl e too see adoptive noise immunity. i m usiing ROS 2.9.38
The first thing you should do is upgrade your ROS, and in advanced tab you should be able to find what you're looking for
by ihernandez
Tue Oct 14, 2008 5:22 pm
Forum: RouterBOARD hardware
Topic: Best Mikrotik configuration
Replies: 4
Views: 2951

Re: Best Mikrotik configuration

On one rb use bridge mode on other station wds. Use clearest turbo channel with nstreme enabled on both devices. On bridge device set nstreme framing policy to exact size. Also in advanced tab use long preamble, and adaptive noise immunity. ANI adds about 2-4 Mbps. If you get good signal strenght, ...
by ihernandez
Sun Oct 12, 2008 11:57 pm
Forum: RouterBOARD hardware
Topic: Best Mikrotik configuration
Replies: 4
Views: 2951

Best Mikrotik configuration

Hello, I am installing one important link on my wisp and I will be using this link as part of my backhaul. I would like to know which would be the best configuration for highest throughput (AP to station, pseudo bridge, etc) I don't need to route on the mikrotiks that I am using to make the radio li...
by ihernandez
Sat Sep 27, 2008 12:50 am
Forum: RouterBOARD hardware
Topic: AP Question
Replies: 3
Views: 965

Re: AP Question

Hello, I have the following configuration for an Access Point: rb433, xr5, sector antenna - 19dbi I would like to know how many subscribers can I give service to with this configuration. On the subscriber side I would be using a NANO 5 Stations. Regards, Ignacio How much bandwidth will be allocated...
by ihernandez
Fri Sep 26, 2008 7:05 pm
Forum: RouterBOARD hardware
Topic: AP Question
Replies: 3
Views: 965

AP Question

Hello, I have the following configuration for an Access Point: rb433, xr5, sector antenna - 19dbi
I would like to know how many subscribers can I give service to with this configuration. On the subscriber side I would be using a NANO 5 Stations.
Regards,

Ignacio
by ihernandez
Fri Aug 29, 2008 12:06 am
Forum: RouterBOARD hardware
Topic: Hotspot
Replies: 3
Views: 992

Hotspot

Hello, I would like how to solve a problem that I am having: I use hotspot for my residential clients, I would like to give a username for each person that lives on a given apartment. The problem comes when I specify the amount of bandwidth that I am allocating for each apartment, in example One apa...
by ihernandez
Thu Aug 28, 2008 12:28 am
Forum: RouterBOARD hardware
Topic: RB433AH problem
Replies: 4
Views: 1636

Re: RB433AH problem

I have RB433AH ROS 3.13, firmware 2.16 using 2 x XR5 in dual-nstreme mode. the voltage is 11V, standing still when the cpu is set to 680MHz everytihng is ok but when I set it to 800MHz the RB works for a while and then reboots there is nothing wrong in the log I don't know if the watchdog is going ...
by ihernandez
Fri Aug 01, 2008 3:06 am
Forum: RouterBOARD hardware
Topic: CLI
Replies: 5
Views: 1271

Re: CLI

-----
Hello fren,

are you working with mikrotik's. . . . ? :wink:

regards
Hasbullah.com
-----
Yes, I have 10 mikrotiks and over 15 wireless links.
Regards,

Ignacio
by ihernandez
Thu Jul 31, 2008 5:17 pm
Forum: RouterBOARD hardware
Topic: CLI
Replies: 5
Views: 1271

Re: CLI

Hello, I have the same question but for the radio links. Is there a way to see the serial number for the wireless cards

Regards
Ignacio
by ihernandez
Thu Jul 31, 2008 12:10 am
Forum: RouterBOARD hardware
Topic: CLI
Replies: 5
Views: 1271

CLI

Hello, is there a way to get through CLI the serial number of the routerboard. If not, is it possible in any other way?
Regards,
Ignacio
by ihernandez
Wed Jul 30, 2008 2:26 am
Forum: RouterBOARD hardware
Topic: 5km link
Replies: 4
Views: 1073

Re: 5km link

what antennas are you using? Check the pigtails. Make sure you aligned the polarity of the feedhorn to the polarity of the grid. Make sure you are using a for main on the pigtail or b for aux connector. Can you see the other side with your eyes? Also grid dishes are hard to aim and usually only hav...
by ihernandez
Tue Jul 29, 2008 10:44 am
Forum: RouterBOARD hardware
Topic: 5km link
Replies: 4
Views: 1073

Re: 5km link

how long is your cable? is the visibility clear? did you use snooper to scan what frequency is most free? did you set transmit power to "default"? did you try "/interface wireless reset"? Hello, my cable is 6ft long, the line of sight is clear, I did use snooper and got that 5180 was a great freque...
by ihernandez
Mon Jul 28, 2008 9:39 pm
Forum: RouterBOARD hardware
Topic: 5km link
Replies: 4
Views: 1073

5km link

Hello, I am having trouble making a 5km link. I am using 2 grid antennas 22bi, and 2 rb52. Vertical pol. The signal strength is low, it varies from -78 to -81 and the longest time it has been connected without dropping the connection is about 3h
What can i do?

Regards,

Ignacio
by ihernandez
Tue Jul 22, 2008 5:24 pm
Forum: General
Topic: 3.11 "restore" erorr ?!
Replies: 9
Views: 2295

Re: 3.11 "restore" erorr ?!

the restore button is there if you double click on the actual file. they just moved the button. however its broken in 3.11. MT confirms this will be fixed. for now i was able to use the CLI to restore a backup.
Hello, I would like to know which is the CLI sequence to restore a backup.
Thank you
by ihernandez
Tue Jul 22, 2008 3:58 pm
Forum: RouterBOARD hardware
Topic: RB433AH
Replies: 21
Views: 4760

Re: RB433AH

Thank you, will do this and let you know how it went
by ihernandez
Tue Jul 22, 2008 3:14 pm
Forum: RouterBOARD hardware
Topic: RB433AH
Replies: 21
Views: 4760

Re: RB433AH

"make sure you are using latest RouterBOOT and RouterOS v3.11"

Hello, I would like to know how do I upgrade to the latest RouterBOOT

Thanks
by ihernandez
Fri May 16, 2008 4:24 am
Forum: RouterBOARD hardware
Topic: 4 km Link
Replies: 9
Views: 1479

Re: 4 km Link

Hello, thank you for taking the time and letting me know how to do this. As soon as I do this, I will post my results
Regards,

Ignacio
by ihernandez
Fri May 16, 2008 3:04 am
Forum: RouterBOARD hardware
Topic: 4 km Link
Replies: 9
Views: 1479

Re: 4 km Link

Thank you again for your reply, since I am a little new to mikrotik and minipci.. could you be more specific on how to do this?
Regards,

Ignacio
by ihernandez
Fri May 16, 2008 2:35 am
Forum: RouterBOARD hardware
Topic: 4 km Link
Replies: 9
Views: 1479

Re: 4 km Link

How do I know if they are propperly aligned?
How do I use the Align button, do I use it from the subscriber?
by ihernandez
Fri May 16, 2008 2:30 am
Forum: RouterBOARD hardware
Topic: 4 km Link
Replies: 9
Views: 1479

Re: 4 km Link

Thank you for your prompt reply,when I change the cards:
How do I know if they are propperly aligned?
One is configured as AP bridge and the other one as station, is there a better way to configure this if its a point to point link?
How do I use the Align button, do I use it from the subscriber?
by ihernandez
Fri May 16, 2008 2:11 am
Forum: RouterBOARD hardware
Topic: 4 km Link
Replies: 9
Views: 1479

4 km Link

For antennas I use dishes 29dbi I have a pair of Engenius Model name: EMP8602 Plus-s How can I optimize this? Where should I make the changes in winbox in order to improve ccq % rate? How do I know if they are propperly aligned? One is configured as AP bridge and the other one as station, is there a...
by ihernandez
Wed May 14, 2008 1:58 am
Forum: RouterBOARD hardware
Topic: 17 km wireless link
Replies: 6
Views: 1395

Re: 17 km wireless link

Thank you, do you recommend that I use an amplifier with this setup?
Regards,
Ignacio
by ihernandez
Wed May 14, 2008 1:16 am
Forum: RouterBOARD hardware
Topic: 17 km wireless link
Replies: 6
Views: 1395

17 km wireless link

Hello, I would like to know if you could point me in a right direction. I need to make a 17 km wireless link and would like to know what antennas should I use as well as the best wireless mini pci suited for the job.
I have a clear line of sight.

All your comments are welcome!!!

Regards,
Ignacio
by ihernandez
Tue May 13, 2008 7:30 pm
Forum: Wireless Networking
Topic: Ubiquity mini pci cards
Replies: 1
Views: 844

Ubiquity mini pci cards

Hello, I have a question about an Ubiquity card, the XtremeRange3 2.7-3.7GHz. Can I use this card with mikrotik routers, if so, which is the best mikrotik router for this card and which is the best antenna for this card. The approx length of the link is 15 km and the reason for me to choose this car...
by ihernandez
Tue May 13, 2008 3:32 am
Forum: Wireless Networking
Topic: DFS Mode
Replies: 19
Views: 52752

Re: DFS Mode

Thank you for your reply, how would I set it up and what tests do I have to do to ensure its working
Regards,
Ignacio
by ihernandez
Tue May 13, 2008 12:58 am
Forum: Wireless Networking
Topic: DFS Mode
Replies: 19
Views: 52752

DFS Mode

Hello, I have a question about what exactly is DFS mode and how do I implement it. I have not found Info about this on the forums. Apparently everyone has it on dfs mode=none
Regards,

Ignacio
by ihernandez
Thu May 08, 2008 12:08 am
Forum: RouterBOARD hardware
Topic: RB 333 and minipci wireless link not stable enough
Replies: 20
Views: 3834

Re: RB 333 and minipci wireless link not stable enough

Thank you for your support, I will let my supplier that what he sold me is pure junk!
by ihernandez
Wed May 07, 2008 9:55 pm
Forum: RouterBOARD hardware
Topic: RB 333 and minipci wireless link not stable enough
Replies: 20
Views: 3834

Re: RB 333 and minipci wireless link not stable enough

I'm I better off with a R52H from mikrotik for a 4km link?
by ihernandez
Wed May 07, 2008 9:30 pm
Forum: RouterBOARD hardware
Topic: RB 333 and minipci wireless link not stable enough
Replies: 20
Views: 3834

Re: RB 333 and minipci wireless link not stable enough

To start, you need to upgrade your ROS to the latest version. Your signal strength will not give a reliable connection. Buy yourself a couple SR or XR5's and you will be fine. Is the signal too strong? or is it just that the minipci cards are not good?, Can I modify manually the signal strength? Re...
by ihernandez
Wed May 07, 2008 8:17 pm
Forum: RouterBOARD hardware
Topic: RB 333 and minipci wireless link not stable enough
Replies: 20
Views: 3834

Re: RB 333 and minipci wireless link not stable enough

Continuing with my posts, I am including some printscreens with the info that follows: I have two buildings connected 4Kms appart (aprox) signal strength -88 dbm Noise Floor -95 dbm overall tx ccq oscilates from 10% to 50% and somtimes the connection is dropped I should have nstream disabled right? ...
by ihernandez
Wed May 07, 2008 8:07 pm
Forum: RouterBOARD hardware
Topic: RB 333 and minipci wireless link not stable enough
Replies: 20
Views: 3834

Re: RB 333 and minipci wireless link not stable enough

That is a horrible card to use for 5ghz. Get a R52h or XR5
Thanks for the info, which one is better for distances no longer than 20km?
For antennas I use dishes 29dbi.

Thank you,

Ignacio
by ihernandez
Wed May 07, 2008 3:54 pm
Forum: RouterBOARD hardware
Topic: RB 333 and minipci wireless link not stable enough
Replies: 20
Views: 3834

Re: RB 333 and minipci wireless link not stable enough

The wireless card:
Engenius
Model name: EMP8602 Plus-s
by ihernandez
Tue May 06, 2008 4:47 pm
Forum: RouterBOARD hardware
Topic: RB 333 and minipci wireless link not stable enough
Replies: 20
Views: 3834

Re: RB 333 and minipci wireless link not stable enough

5413 doesn't tell me anything. What make/model are the cards?
The info that is shown in the winbox about the card type is: Atheros AR5413
Is this enough or you need more info. Where can I find more info about the cards?
by ihernandez
Tue May 06, 2008 3:33 pm
Forum: RouterBOARD hardware
Topic: RB 333 and minipci wireless link not stable enough
Replies: 20
Views: 3834

Re: RB 333 and minipci wireless link not stable enough

What type of radio are you using? Atheros AR5413 5745 Mhz What is your signal strength? I Will post this later on because the link is down What height are your antennas? One is on top of a 10 story building which is on top of a 400 mts hill The other one is a 8 story building Do you have clear line ...
by ihernandez
Tue May 06, 2008 2:37 am
Forum: RouterBOARD hardware
Topic: RB 333 and minipci wireless link not stable enough
Replies: 20
Views: 3834

RB 333 and minipci wireless link not stable enough

Hello, I have successfully installed 2 RB333 on each there is a wireless minipci card and each rb333 is located on a different building. The distance between the buildings is about 4 KM. I used 24dbi dish antennas. The link behaves perfect when it doesn't rain, however when it rains it is not too re...
by ihernandez
Sat Apr 12, 2008 4:23 pm
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 33204

Re: CPE-Antenna alignment via customer / Application available?

Hello cmit,

If you would be so kind to mail it to me too !

thanks in advance

ihernandez at c-com dot net dot ve or
ignaciohernandezr at gmail dot com

:D