Not really ax. is other branch of IEEE standardization. This is Standard deviation, almost like NV2 etc..Sounds like you're asking for 802.11ax...
What you prefer, plastic or metal ? We can make you limited editionThis Horn is made from Plastic or Metal?
You can reach on this about 600m?
This is, what was making on CCR, no longer such problem on that RB1100AH4, only sometime, but it gets sorted out by averagingAfter migration to The Dude 6.41.2 on RB11004AHx4 Dude edition most of our graphs has gaps
3.12Did you update winbox too?There is a bug in last versions, you cant usually add interface to bridge port via winbox..
Are you able to provide us interface to enable certain groups of elements of phase array grid?wAP60G uses an complex algorithm to select best elements from patch array. With reflector it needs to be re calibrated to be able to work correctly.
If you use standard mesh antenna, which is fine for 5 GHZ you cant make fortune on 60 GHz, the wavelength is 1/2 cm, I am surprised you made more..we cant (without enormous hassle) setup and maintain 60ghz link over more than 500m without rssi signal level.
It is blow. with such apperture and quality antenna you will get complete MCS12 on 1,5km320m signal 80 MCS 8 full speed but one side wAP is inserted into LHG XL
I dont think so.. it is SW defined radio. So it is just matter of setting Symbol speedMaybe the new chips do not support it?
how you have configured devices? as wds?
if yes, did you added to bridge wlan interfaces on AP side?
Does pings jumping if pinging to remote sites?
Thank you for help!Look for AR9380 on Ebay. For about 12 euros you have a pretty nice 3x3 2.4/5GHz card.
I have several 'Apple' cards (they are just reference design from Qualcomm/Atheros), working perfectly.
gosh.. keep on subject, what it has to do with CCR?any more details than "Some Xeon 2GHz"
It is complete off topic, it belongs to HW section, but everybody from HW dep. of MT know what I am talking about.. Second problem is shared PCI bus, so full thruput I can give only on 2 PCI connectors.Could you be more specific please to understand it?
Please, please, please..in future we might add support for customer channel support for newer AR93xx chipsets as well.
Any forevie for new generation will do the same ?Only AR92xx wireless chipsets support those custom channel options.
Ok I will do that later today, but it seems it wont to expand at all. I will try it laterwidth=30 is the max value and since you are using extension channel you are already using 60mhz (2x30mhz). Maybe it isn't working so well so try to lower the width to 29, 28 or even little lower.
40 works fine (I mean basic 20+20 expansion)that gaves 220 MbitIt is RB751GCould you try lower? try 40MHz? Which wireless chip do you use? This feature works only on newer wireless chips.
Radio transmit.. we do transvertor stuff and maximum thruput is welcomed with 751G we can do this now, which is severe difference against jammed 5GHz and 2,5GHz. More robust platform is welcomed.depends on task you want it to perform.
You know, just curious.. Chipset type, how hard to get on buses, how to implement this gardware to our dreamswhy do you need exact photo? what is the exact thing you are interested in?
specrtum scan is only supported on a few wireless cards
I wanted to ask first! Nstreme dual under 5B3 sucksssssssssss..When is the new version with all the wireless changes being released ?
I was hoping. Full duplex would be nice for a few of my customers, not worth the expense for large scale.
My own experience is that water surfaces are really big big big problem for radiolinks. On all frequencies.. Especially on long links..30 km 5 Ghz link over water: lake St-Jean, Qc, Canada
I will give a try on 5beta1 as 4.7 package is broken...
When I make change as you told all traffic is cut off unfortunately except P2P (it is like DNS is cutted off)If rule 26 is your last drop rule then you might remove this:
You want to drop all connections, not just ones marked invalid.