Community discussions

Search found 50 matches

by nuru
Thu Feb 15, 2018 11:59 am
Forum: RouterBOARD hardware
Topic: Problem with CCR1072 SFP Interface
Replies: 6
Views: 1768

Re: Problem with CCR1072 SFP Interface

Which ROS version are you using? I'm sure I remember seeing something in a change log recently that addressed something like this? Thank you for your response The CCR 1072 came with ROS v6.39.2. Then I though it could be a bug and upgraded to 6.41.1 but its still the same problem. You have to manua...
by nuru
Wed Feb 14, 2018 11:57 pm
Forum: RouterBOARD hardware
Topic: Problem with CCR1072 SFP Interface
Replies: 6
Views: 1768

Problem with CCR1072 SFP Interface

Just installed a new CCR1072. The CCR is connected to multiple CRS317 and a Cisco 2900 Router via multi mode 1.25GB SFP module. Anytime the link between any device and the CCR1072 is interrupted either because of power failure on the other device or if you unplug the fiber cable and plug it back. Th...
by nuru
Mon Feb 12, 2018 4:17 am
Forum: RouterBOARD hardware
Topic: CRS Netinstall stuck on junmping to kernel code
Replies: 25
Views: 4285

CRS Netinstall stuck on junmping to kernel code

Bough a new CRS317. Upgraded the RouterOS and the device went into a continuous booting loop.. I eventually did a netinstall with installation finished successfully but on reboot the CRS317 will not go pas jumping to kernel code. See below.Any help will be appreciated Formatting disk...................
by nuru
Thu Feb 23, 2017 8:17 am
Forum: General
Topic: https://forum.mikrotik.com link broken
Replies: 2
Views: 413

https://forum.mikrotik.com link broken

I noticed recently that if I tried going to the forum via the link https://forum.mikrotik.com/ from the forum home page (https://mikrotik.com/support) I get a "This site can’t be reached" response. But manually inputting http://forum.mikrotik.com works. Is it me or the link https://forum.mikrotik.co...
by nuru
Fri Jul 15, 2016 2:19 am
Forum: Wireless Networking
Topic: Wireless product max distance
Replies: 60
Views: 43063

Re: Wireless product max distance

Chechito, what are you trying to find? i am trying to replicate this result lhg3.jpg I was encouraged by Normis post to replace my High gain SXT with the LHG. But I discovered that the LHG does not work very well in a crowded area compared to the High gain SXT. A week after deploying the LHG in a p...
by nuru
Mon Apr 18, 2016 1:37 pm
Forum: General
Topic: v6.35 [current] is released!
Replies: 103
Views: 24470

Re: v6.35 [current] is released!

I have a PPPOE over VPLS network.
VPLS from Base Box 5 (Client access point) to CCR1036 (PPPOE concentrator)
Upgrade Base Box 5 from 6.34.2 to 6.35 broke my VPLS. Cannot ping at 1508 without fragmentation. Revert back to 6.34.2 and everything is OK.
Can anyone help out on this please.
by nuru
Sat Apr 16, 2016 2:51 am
Forum: General
Topic: v6.35 [current] is released!
Replies: 103
Views: 24470

Re: v6.35 [current] is released!

I have a PPPOE over VPLS network.
VPLS from Base Box 5 (Client access point) to CCR1036 (PPPOE concentrator)
Upgrade Base Box 5 from 6.34.2 to 6.35 broke my VPLS. Cannot ping at 1508 without fragmentation. Revert back to 6.34.2 and everything is OK.
by nuru
Sun Nov 15, 2015 10:03 pm
Forum: General
Topic: Bring public IPs to PPPoE server through OSPF
Replies: 3
Views: 878

Re: Bring public IPs to PPPoE server through OSPF

Hello, if I have a OSPF network and an edge router with a public /30, that I redistribute as connected, can I assign my /27 (routed by the ISP through the /30) directly to clients from any of the PPPoE server in the OSPF network?
I believe that should be possible using VPLS
by nuru
Sun Nov 15, 2015 12:32 pm
Forum: The User Manager
Topic: Which Billing System Is The Best ???
Replies: 75
Views: 60252

Re: Which Billing System Is The Best ???

anyone interested to try our software??
http://gowifi.in/wisp-manager/
I am interested in your software. The link you provided is broken
by nuru
Sun Apr 26, 2015 2:43 am
Forum: Wireless Networking
Topic: New RF Elements Sector Antennas
Replies: 5
Views: 1701

Re: New RF Elements Sector Antennas

If only RFElements can provide availability date for these new product.They said first quarter 2015 but it dosent seem to be available in the market at the moment.
by nuru
Sat Apr 25, 2015 12:05 pm
Forum: Wireless Networking
Topic: RF Element's "Symmetrical Antennas"
Replies: 20
Views: 4221

Re: RF Element's "Symmetrical Antennas"

Any news on availability of this product? I understand it should be in the market 1st quarter 2015, its end of first quarter and no one seem to have it in stock.
by nuru
Tue Mar 31, 2015 1:21 am
Forum: General
Topic: Centralized Radius
Replies: 4
Views: 1282

Re: Centralized Radius

Hi zarencorp, Did you find any solution for this. I am facing the same issue and have the same doubt. Please help. Its possible. Hoping this is what you are asking for. Set each router to serve as NAS connected to each terminal and configure it as a Radius client to the User Manager. You will need ...
by nuru
Sun Jan 11, 2015 9:36 am
Forum: Wireless Networking
Topic: Capsmanager
Replies: 4
Views: 2261

Re: Capsmanager

No relation to nv2. I have read that the capwap protocol is according to some general standard so it should be supporting other vendor devices if they support the same standard also. But I haven't tested it. Search for capwap. Mikrotik Capsman V1 is based on CAPWAP protocol, but due to certain limi...
by nuru
Sun Dec 28, 2014 10:44 am
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101555

Re: CAPsMAN v2 ready for testing

hadyatef. TP-Link can only work as a normal CPE in a Mikrotik CAPsMAN configured network. The AP (CAPs) you can use for Mikrotik WLAN controller (CAPsMAN) has to be a RouterOS powered AP, but you will want to use Mikrotik AP for compatibility reasons. The space you want to cover will usually determ...
by nuru
Sat Dec 27, 2014 12:38 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101555

Re: CAPsMAN v2 ready for testing

hadyatef. TP-Link can only work as a normal CPE in a Mikrotik CAPsMAN configured network. The AP (CAPs) you can use for Mikrotik WLAN controller (CAPsMAN) has to be a RouterOS powered AP, but you will want to use Mikrotik AP for compatibility reasons. The space you want to cover will usually determi...
by nuru
Sat Nov 15, 2014 8:34 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101555

Re: CAPsMAN v2 ready for testing

Is this feature requested available now http://forum.mikrotik.com/viewtopic.php?f=7&t=85974
in registration table you can already see the rx and tx statistics for each mac address.
Sorry didnt check. Hopefully we will get CCQ soon?
by nuru
Sat Nov 15, 2014 6:27 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101555

Re: CAPsMAN v2 ready for testing

Indeed there is a lot of improvement. 4 BaseBox2 with RB750 as the CAPsMAN Will test the roaming and see how it it hands of.
by nuru
Sat Nov 15, 2014 4:21 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101555

Re: CAPsMAN v2 ready for testing

Is this feature requested available now http://forum.mikrotik.com/viewtopic.php?f=7&t=85974
by nuru
Wed Sep 03, 2014 11:04 pm
Forum: General
Topic: Hotspot redirection on login error
Replies: 2
Views: 837

Re: Hotspot redirection on login error

You could possibly create your own captive portal and redirect all users to it rather than letting the MT do the portal. This would give you more flexibility and control of how users are redirected and authenticated. Thanks scotthammersley, Can you give me direction on how or who can do this for me...
by nuru
Wed Sep 03, 2014 1:40 am
Forum: General
Topic: Hotspot redirection on login error
Replies: 2
Views: 837

Hotspot redirection on login error

Hi everyone. I have Mikrotik hotspot configure on an AP, authentication and billing is done using DMA Softlab software. User purchase ticket for logging on to use the Internet service via the hotspot captive portal. However for security reason all users are require to verify their ticket (one time o...
by nuru
Thu Jun 12, 2014 1:44 pm
Forum: Wireless Networking
Topic: CAPsMAN Manger No registered client signal status sent
Replies: 4
Views: 1845

CAPsMAN Manger No registered client signal status sent

I set up a CAPsMAN using RB 912UAG 2HPnD as the CAP and an RB750UP as the CAPsMAN manager and associated client are authenticated via a radius server. I have tried using both SNMP and API to obtain registered client signal strength and quality for display in the Radius Server but its not working, al...
by nuru
Fri Apr 11, 2014 3:34 am
Forum: General
Topic: CAPsManager not forwarding traffic
Replies: 1
Views: 1905

Re: CAPsManager not forwarding traffic

Has anyone tried the CAPsMan over wireless link. The CAP is connecting to the CAPsManager via NV2 radio using layer 3. The CAP get registered to the CAPsManager and 802.11b/g client are registered on the CAPsManager. The forwarding mode is enabled and datapath is a bridge with no physical interface...
by nuru
Wed Apr 09, 2014 12:13 pm
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 56224

Re: CAPs Manager

I have configured CAPsMan with the CAP and the CAPs Manager connected directly via UTP cable. The CAPsMan is configured to process data (forward mode). I configure a bridge attached to the datapath, a DHCP server is configured on the bridge. The IP lease to client is a private IP so I configured a n...
by nuru
Tue Apr 08, 2014 2:05 am
Forum: General
Topic: v6.11 released
Replies: 260
Views: 79617

Re: v6.11 released

Has anyone tried the CAPsMan over wireless link. The CAP is connecting to the CAPsManager via NV2 radio using layer 3. The CAP get registered to the CAPsManager and 802.11b/g client are registered on the CAPsManager. The forwarding mode is enabled and datapath is a bridge with no physical interface...
by nuru
Thu Apr 03, 2014 4:01 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 79617

Re: v6.11 released

Has anyone tried the CAPsMan over wireless link. The CAP is connecting to the CAPsManager via NV2 radio using layer 3. The CAP get registered to the CAPsManager and 802.11b/g client are registered on the CAPsManager. The forwarding mode is enabled and datapath is a bridge with no physical interface...
by nuru
Thu Apr 03, 2014 2:41 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 79617

Re: v6.11 released

Has anyone tried the CAPsMan over wireless link. The CAP is connecting to the CAPsManager via NV2 radio using layer 3. The CAP get registered to the CAPsManager and 802.11b/g client are registered on the CAPsManager. The forwarding mode is enabled and datapath is a bridge with no physical interface ...
by nuru
Thu Apr 03, 2014 1:41 pm
Forum: General
Topic: CAPsManager not forwarding traffic
Replies: 1
Views: 1905

CAPsManager not forwarding traffic

Has anyone tried the CAPsMan over wireless link. The CAP is connecting to the CAPsManager via NV2 radio using layer 3. The CAP get registered to the CAPsManager and 802.11b/g client are registered on the CAPsManager. The forwarding mode is enabled and datapath is a bridge with no physical interface ...
by nuru
Thu Jul 18, 2013 6:50 pm
Forum: RouterBOARD hardware
Topic: CCR1016-12G Ethernet Ports failing
Replies: 9
Views: 3818

Re: CCR1016-12G Ethernet Ports failing

Ver 6.1
by nuru
Thu Jul 18, 2013 3:51 pm
Forum: RouterBOARD hardware
Topic: CCR1016-12G Ethernet Ports failing
Replies: 9
Views: 3818

Re: CCR1016-12G Ethernet Ports failing

Just bought the CCR1016-12G. I noticed that all the Ethernet port are showing active status both in RouterOS and on the LCD panel (link-ok) even though the Interfaces have no cable connected. The Router becomes unresponsive after about 24 hours and will need a reboot before I can access any of the E...
by nuru
Thu Jul 18, 2013 3:49 pm
Forum: RouterBOARD hardware
Topic: CCR1016-12G Failing Ethernet Port
Replies: 0
Views: 490

CCR1016-12G Failing Ethernet Port

Just bought the CCR1016-12G. I noticed that all the Ethernet port are showing active status both in RouterOS and on the LCD panel (link-ok) even though the Interfaces have no cable connected. The Router becomes unresponsive after about 24 hours and will need a reboot before I can access any of the E...
by nuru
Fri Mar 21, 2008 5:43 pm
Forum: Scripting
Topic: Help with script to move simple queue item number
Replies: 1
Views: 1205

Help with script to move simple queue item number

I dont know how to write a script, guess I have to start learning. Can someone help with this please. In simple queue I created some queue for user that are sending data from or to my local servers. I have hotspot user that when logged on via wireless, a dynamic simple queue is created for them from...
by nuru
Tue Jul 31, 2007 12:45 am
Forum: General
Topic: Mikrotik home page down?
Replies: 9
Views: 1216

Re: Mikrotik home page down?

Its definately wasnt my browser. After trying the site for a whole day without success, I decided to send a post on it, not long after that it started working. I remeber sometime ago, I had the same problem, I sent a post and got a reply that its ok and the site came back after I got a response it w...
by nuru
Thu Jul 26, 2007 8:36 pm
Forum: General
Topic: Mikrotik home page down?
Replies: 9
Views: 1216

Mikrotik home page down?

I wonder if its my network. Mikrotik home page returned page cannot be displayed since yesterday. Is anybody having same problem.
by nuru
Mon Apr 17, 2006 5:20 pm
Forum: Wireless Networking
Topic: Hotspot problem
Replies: 3
Views: 1103

same here, everything works except http

Nurudeen
by nuru
Sun Apr 16, 2006 8:58 am
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 32964

Me too please.
by nuru
Sat Mar 18, 2006 10:05 pm
Forum: Wireless Networking
Topic: MESH with MikroTik
Replies: 38
Views: 29498

protocol-mode=rstp? which version of MT support this feature. I have 2.9.17 but its return invalid arguement.

Nurudeen
by nuru
Mon Mar 13, 2006 8:58 pm
Forum: RouterBOARD hardware
Topic: whats wrong with routrboard website
Replies: 6
Views: 1789

whats wrong with routrboard website

Hi everyone,

Been tryng to reach routerboard.com website, its either too slow, or wont open at all.

Anybody experiencing this or is it just me?

Nurudeen
by nuru
Sun Mar 12, 2006 11:20 pm
Forum: RouterBOARD hardware
Topic: New RouterBoard 100
Replies: 34
Views: 8345

I just need to do a point to point and pass a max 11MB traffic, even a 5MB will do. How effective will the RB100 be if I enable nstreme and wpa?

Any comment will be apreciated.

Nurudeen
by nuru
Sat Mar 11, 2006 1:59 pm
Forum: General
Topic: Continous reboot after upgrade to 2.9.17
Replies: 2
Views: 704

Thanks

Nurudeen
by nuru
Sat Mar 11, 2006 1:58 pm
Forum: General
Topic: MT OS ver 2.9.14 download
Replies: 2
Views: 658

MT OS ver 2.9.14 download

Hi anyone know how I can get MT OS ver. 2.9.14? I tried upgrading to 2.9.17 several times, initially my MT keeps rebooting after the upgrade, I recovered re-install, the second time I get kernel panic error, I even tried upgrading using the ZIP package, It will not install 2.9.17. I have now reverte...
by nuru
Sat Mar 11, 2006 2:09 am
Forum: General
Topic: Continous reboot after upgrade to 2.9.17
Replies: 2
Views: 704

Continous reboot after upgrade to 2.9.17

Hi all,

I have just upgraded my routerOS system from 2.9.11 to 2.9.17, the system keeps rebooting when loading kernel. I have a 2 years configuration on this machine running well until now. How can I recover from this continous loop please.

Nurudeen
by nuru
Tue Nov 22, 2005 10:57 pm
Forum: General
Topic: VPN error 619
Replies: 11
Views: 4290

Thanks you Eugene, I finally found that the problem was this command: ip verify unicast reverse-path in my cisco router, from a software I use for debuging I noticed errors on GRE, my guess is that it was seeing the packet as comming from a non routable or spoofed source address. Everything started ...
by nuru
Mon Nov 21, 2005 12:01 pm
Forum: General
Topic: VPN error 619
Replies: 11
Views: 4290

Thank you eugene,

I am using windows client to connect to a Mikrotik VPN L2TP server, how do I compare the MRU/MTU, its presently set to 1460 on the Mikrotik. Where is the setting at in Windows client.

Nurudeen.
by nuru
Tue Nov 15, 2005 11:49 pm
Forum: General
Topic: VPN error 619
Replies: 11
Views: 4290

Still cant get this VPN to work. I set up another Mikrotik L2TP server and place it behind a 1:1 NAT cisco router in my test lab just like the one I have at the my site and it worked, I have compared all the configuration both on cisco and the Mikrotik of my test system with my client config, even t...
by nuru
Fri Nov 11, 2005 9:47 am
Forum: General
Topic: VPN error 619
Replies: 11
Views: 4290

Yes the L2TP server is enable and yes it works back to back, I want to believe it has to do with the NAT on the cisco router.
Does any one know how to tell a cisco router not not NAT for a specific IP, configuration example?

Thanks all
by nuru
Wed Nov 09, 2005 12:17 pm
Forum: General
Topic: VPN error 619
Replies: 11
Views: 4290

VPN error 619

Hi all, I just set up VPN using L2TP on Mikrotik as a VPN server, the Mikrotik is behind a 1:1 NATed Cisco router. I tried connecting to it using windows 2000 client but always get Error 619: The specified port is not connected. I also tried using PPTP but am getting same error. I dissabled IPSec on...
by nuru
Fri Sep 30, 2005 12:42 pm
Forum: General
Topic: Anybody interested in a porn blocklist for their web-proxy?
Replies: 35
Views: 9091

Hi there,

Am interested in the porn list, how can I get it please.

Nurudeen
by nuru
Sat Aug 27, 2005 11:31 am
Forum: General
Topic: what is webproxy-test-2.9.npk?
Replies: 5
Views: 1481

Is any body using webproxy-test-2.9.npk I wanted to try it, after uploading the package I lost my normal webproxy package and didnt see any repalcement nor the webproxy-test-2.9.npk.

Thanks

Nurudeen
by nuru
Wed Jun 29, 2005 11:19 pm
Forum: General
Topic: Upgrade Question
Replies: 1
Views: 500

Upgrade Question

I have a Mikrotik IDE Flash with router OS Ver 2.8.8 Level 3 which I bought about July last year. I need a feature in the 2.9rc6. The license information says ugradable until July/01, does it mean I can still upgrade without requiring new keys?

Will apreaciate any response here.

Thank you

Nurudeen