Community discussions

Search found 247 matches

by imaljko4
Mon Jun 03, 2019 11:57 pm
Forum: General
Topic: Download over xDSL, Upload over 4G LTE
Replies: 10
Views: 779

Re: Download over xDSL, Upload over 4G LTE

Yes i will post once i will manage to make the setup, but it will not be that soon as i am currently very bussy with my work.
by imaljko4
Thu May 30, 2019 1:14 am
Forum: General
Topic: Download over xDSL, Upload over 4G LTE
Replies: 10
Views: 779

Re: Download over xDSL, Upload over 4G LTE

ok. Great. Thank you for help.
by imaljko4
Tue May 28, 2019 1:49 am
Forum: General
Topic: Download over xDSL, Upload over 4G LTE
Replies: 10
Views: 779

Re: Download over xDSL, Upload over 4G LTE

@sindy, thank you very much for your detailed help. I am still very busy this days, but once i find some time i will try to set it up like described. Although might be that this setup will be to advanced for my "basic-beginner" knowledge but i can try. My setup is as follows: 1. LTE: i use mikrotik ...
by imaljko4
Fri May 24, 2019 11:24 pm
Forum: General
Topic: Download over xDSL, Upload over 4G LTE
Replies: 10
Views: 779

Re: Download over xDSL, Upload over 4G LTE

Thank you for your replies. We would like to try both scenarios and see if it works(might be that my provider is allowing source address spoofing). We also have another very fast line in another city, so i could try to setup 2x vpn tunels (xDSl and LTE tunnel) and use that fast line over the vpn tun...
by imaljko4
Thu May 23, 2019 1:00 am
Forum: General
Topic: Download over xDSL, Upload over 4G LTE
Replies: 10
Views: 779

Download over xDSL, Upload over 4G LTE

We have a very slow upload speed on our xDSL line and cannot get any faster option except 4G LTE, which has good upload speeds. Is it possible to setup the mikrotik router to route all download to the xDSL line and all upload to the 4G LTE line? And how to do it if possible, i found an article about...
by imaljko4
Wed Jul 11, 2018 4:05 pm
Forum: The User Manager
Topic: Re: User Manager dynamic Rate limit Queues not working
Replies: 0
Views: 730

Re: User Manager dynamic Rate limit Queues not working

Screenshot_2.png Hello, I am using rb v6.42.5, The rate limit for User-manager are suddenly not working (might be after updating to new version of RB). I have limited all users to 256k upload/ 4M download, but the queues are all red, and none of them has any impact on the users. What to do, please ...
by imaljko4
Tue Feb 14, 2017 5:30 am
Forum: General
Topic: https problem on hotspot
Replies: 97
Views: 91323

Re: https problem on hotspot

Seems like if they are idle for a while even if there cookie has not expired it forces them through the login page to verify the cookie and it fails since its https. I wonder if I just add MAC to this it will not need to do that? To solve this, just enable the : login by "MAC Cookie" option (in the...
by imaljko4
Sun Jan 29, 2017 5:28 am
Forum: General
Topic: Re: Multiple routers; Do i need firewall on each router?
Replies: 5
Views: 788

Re: Multiple routers; Do i need firewall on each router?

ok thanks. On Router 1 i have enabled forwarding only to pppoe, all other forwarding is blocked, (also on bridge interface "ip firewall" is enabled, and i have created rule for Masquerade-Nat in firewall). So i guess that is enough. Or should i still create following rules on router 2 and router 3: ...
by imaljko4
Sun Jan 29, 2017 5:01 am
Forum: General
Topic: Re: Multiple routers; Do i need firewall on each router?
Replies: 5
Views: 788

Re: Multiple routers; Do i need firewall on each router?

Hello, If i have multiple mikrotik routers in my network, do i need to setup the firewall on each router or just on the main router? All routers are in the same subnet, i have created firewall, dhcp, nat, routing etc... only on the main router. On each other connected router(acces points) i have jus...
by imaljko4
Sat Dec 03, 2016 11:40 pm
Forum: General
Topic: Am i being hacked?
Replies: 8
Views: 1504

Re: Am i being hacked?

ok, thanks for help
by imaljko4
Fri Dec 02, 2016 9:36 pm
Forum: General
Topic: Am i being hacked?
Replies: 8
Views: 1504

Re: Am i being hacked?

Thanks. I keep my telnet port closed, just i was suprised how each time I open the port just for 30 seconds, i get attacked immediatelly... My provider is Croatian T-com, and i red that this Mirai botnet is attacking German T-com routers, as its the same company, could it be that my T-com Router/Mod...
by imaljko4
Fri Dec 02, 2016 11:52 am
Forum: General
Topic: Am i being hacked?
Replies: 8
Views: 1504

Re: Am i being hacked?

maybe this "udp 5678" log might not be harmful, but the src mac addres on him "02:01:xx:xx:xx:xx" is not from a MT device. Still i am more concerned about the " proto TCP (SYN) log" from "00:90:1a:xx:xx:xx", also when I change my public ip, this logg immediately repeats, before my dyndns rule was ev...
by imaljko4
Fri Dec 02, 2016 10:57 am
Forum: General
Topic: Am i being hacked?
Replies: 8
Views: 1504

Am i being hacked?

Lately i am having very strange logs in my router, also immediatelly when i enable port 23 in firewall, somebody tries to acces my router with wrong user name and password, seems like brute force, so i have to keep port 23 disabled. This logs continue to happen, i tried refreshing my public ip addre...
by imaljko4
Wed Nov 02, 2016 3:49 pm
Forum: General
Topic: Feature Request: OpenVPN [ovpn] udp tunnels
Replies: 250
Views: 92021

Re: Feature Request: OpenVPN [ovpn] udp tunnels

+1 for UDP on openvpn !
by imaljko4
Thu Jul 16, 2015 12:54 am
Forum: Wireless Networking
Topic: capsman problem: constantly reconnecting of clients computer
Replies: 0
Views: 397

capsman problem: constantly reconnecting of clients computer

Hello, I am using capsman with RB951xx and RB 751xx AP-s. My problem is when the client laptops connect to our ap-s (capsman network) they are constantly getting recconnected to the aps, even though they have a good signal to the ap. So for example if they use skype, the line breakes often for few m...
by imaljko4
Mon Jul 13, 2015 11:02 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

HI, thanks again for your software, do you know how many ip-s (computers) can the viewer show at once on a network. My network has about 50 computers connected, but seems that the viewer will show only up to 33 computers, or am i wrong? Do you know if i can somewhere specify that the viewer shows mo...
by imaljko4
Tue Jun 02, 2015 1:36 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

Hi, Thanks for the programs, it look like Awesome. I have the service Running, but im not beeing able to catch teh traffic, and when i check the SnifferService.txt appear "Error: Cannot get traffic: http response code: 401, unauthorized". Im suing the same usr, group and password in the readme. Cou...
by imaljko4
Tue May 05, 2015 2:38 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

Can i monitor 2 different mikrotik routers on the same server ? ( 1 service running with 2 servers or 2 services running with 1 server each ?) I am able to monitor 2 different routers on the same computer. I had to install/run 2 services (had to rename the 2nd service to "sniffer2"), and then i use...
by imaljko4
Sat Apr 25, 2015 2:00 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

I've got the same problem. It works great but doesn't show hostnames. I'm using DHCP on my MT. I've tested on 2 MT's with the same effect. Usually it takes few minutes for the hosts to appear. Check in your log on the mikrotik router if you see the "sniffer" user connecting ?(if all works fine, you...
by imaljko4
Fri Apr 10, 2015 12:24 am
Forum: General
Topic: Prioritize traffic, help
Replies: 1
Views: 532

Re: Prioritize traffic, help

No one knows???
by imaljko4
Mon Apr 06, 2015 10:32 am
Forum: General
Topic: Prioritize traffic, help
Replies: 1
Views: 532

Prioritize traffic, help

mik-qos.png Hello, step 1) I want to prioritize traffic, so that i give ; priority 1 to my 192.168.3.100 voip box, Priority 5 to my local network; 192.168.3.0/24 Priority 8 to my hotspot network; 10.0.3.0/24 step2) After that i want to apply 3 priority rules to each separate network (priority 1 for...
by imaljko4
Sat Apr 04, 2015 6:48 pm
Forum: General
Topic: How to prioritize traffic per IP adress?
Replies: 0
Views: 610

How to prioritize traffic per IP adress?

mikrotik3.png Hello I want to prioritize all my traffic that comes from an local ip address 192.168.3.100 (voip box). I tried to do it with mangle, or simple queue but it just doesn't work. I set 192.168.3.100 to have priority 1, and all others have priority 6 When i do a simultaneous download test...
by imaljko4
Mon Mar 16, 2015 2:43 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

Is it possible to use this tool to monitor 2 different mikrotik routers at the same time?
Thank you for help
by imaljko4
Sun Mar 15, 2015 4:26 pm
Forum: General
Topic: Do i need NAT if gateway is on the same subnet?
Replies: 2
Views: 701

Re: Do i need NAT if gateway is on the same subnet?

ok. Thank you.
Yes I use the Mikrotik router in-between, just so that i can have some better monitoring of who is connected and the traffic... etc.
by imaljko4
Sat Mar 14, 2015 11:30 pm
Forum: General
Topic: Do i need NAT if gateway is on the same subnet?
Replies: 2
Views: 701

Do i need NAT if gateway is on the same subnet?

mikrotik.png http://prntscr.com/6gtgui This is my scenario. The Mikrotik router is the DHCP server and the default gateway for client computers. Then he forwards the traffic to the adsl/router which is on the same network as the client pc-s. Do i need to have Nat(masquarade) on Mikrotik router (asw...
by imaljko4
Wed Feb 19, 2014 12:24 am
Forum: General
Topic: High CPU load 100 % on RB 133
Replies: 16
Views: 4318

Re: High CPU load 100 % on RB 133

I have tried disabling all firewall rules, exept the ones which are used for Hotspot (they are created automatically by hotspot), I don't have any queues rules setup, (exept the default ones, which are created by mikrotik): /queue interface set ether1 queue=ethernet-default set ether2 queue=ethernet...
by imaljko4
Mon Feb 17, 2014 1:25 am
Forum: General
Topic: High CPU load 100 % on RB 133
Replies: 16
Views: 4318

Re: High CPU load 100 % on RB 133

or upgrade to 5.26 and see in tool-profile what use your CPU Upgraded to ROS 5.26, to see detailed cpu load. While i am testing, i have 1 wireless client and 2 Ethernet client PC-s connected to the router, one of them is downloading updates, i get following cpu 74% constantly (while the client is d...
by imaljko4
Sun Feb 16, 2014 12:42 am
Forum: General
Topic: High CPU load 100 % on RB 133
Replies: 16
Views: 4318

Re: High CPU load 100 % on RB 133

Thank you for your suggestions.

I will try them out and see if i can fix this.
by imaljko4
Sat Feb 15, 2014 4:43 pm
Forum: General
Topic: High CPU load 100 % on RB 133
Replies: 16
Views: 4318

Re: High CPU load 100 % on RB 133

Have you firewall rules running? Yes i have about 30 regular firewall rules, i had also a script for paypal payments,see here: http://wiki.mikrotik.com/wiki/PayPal_with_hotspot_and_walled_garden_bypass which was creating additional firewall rules, (about 50 additional rules), so i will try to disab...
by imaljko4
Sat Feb 15, 2014 1:24 am
Forum: General
Topic: High CPU load 100 % on RB 133
Replies: 16
Views: 4318

High CPU load 100 % on RB 133

I am having a 100% cpu load on my rb 133, while no clients are connected to the router. Just I am connected to the router, no clients except me are connected, and the router is most of the time on high cpu load, often it goes to 100%. Routeros is 4.17 ( i tried upgrading to v 5.26 but it was even wo...
by imaljko4
Sat Jan 18, 2014 4:41 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

I have the same problem, since I can run the console plink.exe and is in the same folder where is stored snifferservice.exe. Can you make sure that the sniffer service is running (after install i had to manually start the "sniffer service" under control panel- "services")? Also can you access the h...
by imaljko4
Fri Jan 17, 2014 12:19 pm
Forum: Wireless Networking
Topic: Wireless interface - Slave
Replies: 12
Views: 13576

Re: Wireless interface - Slave

Because your interfaces is in bridge, that's makes S. Check Bridge/Ports you interface is add there. yes if the protocol mode is in rstp Yes, my wireless interface is added to the bridge. But my Bridge protocol mode is set to "none" (No rstp). (Ok. so probably as soon as it is in bridge mode, it ad...
by imaljko4
Fri Jan 17, 2014 2:26 am
Forum: Wireless Networking
Topic: Wireless interface - Slave
Replies: 12
Views: 13576

Re: Wireless interface - Slave

Hello Today evening i saw "S" flag on one of my wireless interfaces. Can anyone tell me what it means ? As you can see below, interface works in AP bridge mode and isn't ns2 or bonding slave. Thanks for help :) Regards, I have the same question/problem. My wireless card is set to ap-bridge mode ( n...
by imaljko4
Wed Jan 15, 2014 11:45 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

Great! Thank you very much!
by imaljko4
Mon Jan 13, 2014 8:56 pm
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

One more question; is it possible to monitor Ip addresses for 2 networks? On my Mikrotik router i have : network 1 : 192.168.1.0/24 network 2: 10.0.0.0/24 I would like to monitor Ip addresses on both networks. So how do i need to change the values in the SnifferService.ini file? Something like this ...
by imaljko4
Mon Jan 13, 2014 6:13 pm
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

If you use DHCP and/or DNS on the mikrotik the host names should show (that is what you see in the logs - the dns entries being downloaded) Not sure how to disable logging in mikrotik You are wright, the host-names do show up, just they sometimes get lost when my server-computer(with sniffer servic...
by imaljko4
Mon Jan 13, 2014 10:28 am
Forum: General
Topic: re: How to monitor the Upload/download rate of clients?
Replies: 7
Views: 8075

Re: re: How to monitor the Upload/download rate of clients?

What i need is real time monitor of clients, which shows realtime uplaod/download rate of clients per IP address. I found a great tool to do it here: http://forum.mikrotik.com/viewtopic.php?f=2&t=77193 (big thanks to the tool maker, its really great!!) Still i wanted to know if there is an option, t...
by imaljko4
Sun Jan 12, 2014 11:58 am
Forum: General
Topic: re: How to monitor the Upload/download rate of clients?
Replies: 7
Views: 8075

Re: re: How to monitor realtime Upload/download rate of clie

Why not just put in a PCQ Queue and call the issue resolved. Then you can exempt your private computers from the rules so you have all the bandwidth you need. I didnt quite understand your answere. Can i see real time bandwidth of the client computers with PCQ Queue? And if yes, how can i do it? Th...
by imaljko4
Sun Jan 12, 2014 1:39 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 307012

Re: Tool: Realtime per IP traffic monitor for home/office

This is a great utility, just what i needed. Is it also somehow possible to see the hosts name, next to the Ip address (in my case the hosts name dont always show up)? Also how do i now disable the logs in mikrotik router, for the ssh sniffer user ( now my logs are full with the "sniffer" user, log-...
by imaljko4
Sat Jan 11, 2014 8:08 pm
Forum: General
Topic: RE:Route clients internet trafic through the VPN (openvpn)?
Replies: 0
Views: 596

RE:Route clients internet trafic through the VPN (openvpn)?

I have set up openvpn server on "RB 751", and I am using a XP client to connect to the Openvpn. Everything is working fine, I am able to access the devices on the openvpn network, except that i dont know how do i successfully force the Windows XP client to route all internet traffic through the VPN?...
by imaljko4
Sat Jan 11, 2014 12:36 am
Forum: General
Topic: RE: Openvpn Setup problem: please help
Replies: 3
Views: 3372

RE: Openvpn Setup problem: please help

I have setup the openvpn Server (RB 751-2HND) like described in the wiki here: http://wiki.mikrotik.com/wiki/OpenVPN I am connecting to the Openvpn from a windows XP computer, but when i connect i am constantly getting "Connection reset, restarting" problem. I am using RouterOS 6.7. Kan somebody pin...
by imaljko4
Thu Jan 09, 2014 10:11 pm
Forum: General
Topic: Firewall setup problem
Replies: 4
Views: 2339

Re: Firewall setup problem

Thank you
by imaljko4
Thu Jan 09, 2014 11:36 am
Forum: General
Topic: Firewall setup problem
Replies: 4
Views: 2339

Re: Firewall setup problem

That is pretty normal. These are attempts by outside hosts trying to connect to common ports on your router such as RDP (3389) etc. Disable logging for the Input rule if you want to stop seeing these entries. You can always enable the logging again for diagnostics if necessary. ok. so i can be sure...
by imaljko4
Thu Jan 09, 2014 3:14 am
Forum: General
Topic: Firewall setup problem
Replies: 4
Views: 2339

Firewall setup problem

After setting up the firewall like described in the WIKI here: http://wiki.mikrotik.com/wiki/Basic_universal_firewall_script I am constantly having dropped packets, from different IP addresses, showing up in my logg. Did i misconfigure something, or is it normal to have so many dropped packets? Here...
by imaljko4
Fri Jan 03, 2014 2:52 pm
Forum: Wireless Networking
Topic: Connect to public free WIFi, using mikrotik device?
Replies: 7
Views: 5026

Re: Connect to public free WIFi, using mikrotik device?

It doesn't *have* to be a Mikrotik, its just that some other systems work in strange was. Just view the source of the page, if its method is "GET" and the username & password are in the HTML it shouldn't matter what device its using I tried to launch the "get" command from terminal, but i get an er...
by imaljko4
Fri Jan 03, 2014 2:26 am
Forum: Wireless Networking
Topic: Connect to public free WIFi, using mikrotik device?
Replies: 7
Views: 5026

Re: Connect to public free WIFi, using mikrotik device?

First, remove the default settings. Try this http://www.wirelessinfo.be/index.php/mikrotik/pages/station thank you for your help, Only in this scenario the client devices would still be redirected to the login page, where they would need to click on the "Accept" button in order to use internet. I a...
by imaljko4
Fri Jan 03, 2014 2:18 am
Forum: Wireless Networking
Topic: Connect to public free WIFi, using mikrotik device?
Replies: 7
Views: 5026

Re: Connect to public free WIFi, using mikrotik device?

2 choices. 1) Create a bridge and add the wlan + all ethernet ports to the bridge that way the PC's will be able to go through the hotspot process and click accept. 2)alternatively if the hotspot provider is using mikrotik AND allow PAP login you can connect MT to the wifi open terminal and telnet ...
by imaljko4
Thu Jan 02, 2014 4:49 pm
Forum: Wireless Networking
Topic: Connect to public free WIFi, using mikrotik device?
Replies: 7
Views: 5026

Connect to public free WIFi, using mikrotik device?

I need to connect to a public free wireless network, using a mikrotik device. The problem is, when i connect the mikrotik router, to the public network, there is no internet connection. Because, to use the free wifi, you first need to open the browser, and then it redirects you to the login page, an...
by imaljko4
Sat Sep 07, 2013 10:29 am
Forum: RouterBOARD hardware
Topic: Mni PCI R52H damaged ?
Replies: 1
Views: 776

Mni PCI R52H damaged ?

Hi, On our Hotspot access point somebody broke the antenna, so the wireless card was on for some time with a broken omni antenna. After we replaced the antenna with a new one but (as I was not there) they forgot to turn off the routerboard (mini PCI) while replacing the antenna. Now the wireless is ...
by imaljko4
Sat Aug 31, 2013 1:05 pm
Forum: General
Topic: How to power off/on a 802.3af device with Mikrotik RB?
Replies: 3
Views: 895

Re: How to power off/on a 802.3af device with Mikrotik RB?

Sacrifice one of the led in your router, connect it to relay that control your camera power supply, routeros can control led which control relay
Can you give me more information on how to do it? is there a tutorial link?

thank you
by imaljko4
Thu Aug 29, 2013 11:28 pm
Forum: General
Topic: How to power off/on a 802.3af device with Mikrotik RB?
Replies: 3
Views: 895

How to power off/on a 802.3af device with Mikrotik RB?

Hello, Does somebody know a solution how i can power off and power on a POE 802.3af device, with help of a mikrotik Router? (I am having a POE 802.3af ip camera, that constantly freezes and then needs a power off/on to work again. I would need to be able to do it from a remote location...) Thank you
by imaljko4
Thu Aug 29, 2013 1:18 am
Forum: Scripting
Topic: How to execute a cmd command with a script?
Replies: 5
Views: 1498

Re: How to execute a cmd command with a script?

ok. Thank you
by imaljko4
Thu Aug 29, 2013 1:00 am
Forum: Scripting
Topic: How to execute a cmd command with a script?
Replies: 5
Views: 1498

Re: How to execute a cmd command with a script?

try this

ros code

/tool fetch mode=http url=192.168.0.5/form/reboot user=admin password=password
Cool, it worked. Is there something like a "sleep" or "wait" command, i would like to wait 30min and then reboot the second camera with the same script .

Thanks
by imaljko4
Wed Aug 28, 2013 1:55 am
Forum: Scripting
Topic: How to execute a cmd command with a script?
Replies: 5
Views: 1498

How to execute a cmd command with a script?

I would like to reboot my network camera periodically by executing the following URL:
http://admin:password@192.168.0.5/form/reboot
Can i write a script in RouterOs that would execute the above URL (reboot the network camera), and how to do it?

Thanks for help
by imaljko4
Tue Apr 02, 2013 4:09 am
Forum: RouterBOARD hardware
Topic: RB751U-2HnD
Replies: 24
Views: 31830

Re: RB751U-2HnD

Hi janisk..
can we have option that, the casing can look like the ruckus or the ubnt unifi?

it will be more pretty for us to mount in the hotel.

appreciated it if mikrotik can consider on that.
Yes I agree, we also need that kind of look for the Hotel.
by imaljko4
Mon Apr 01, 2013 12:03 pm
Forum: The User Manager
Topic: anyone got paypal working? (resolved)
Replies: 3
Views: 2157

Re: anyone got paypal working? (resolved)

Is it because I am using http://www.sandbox.paypal.com ... Can you help me out, I am also trying to use sandbox for testing with paypal. But when i try to make a payment with User Manager it then redirects me to the original paypal page (https://www.paypal.com/....) and on that page I am not able t...
by imaljko4
Mon Apr 01, 2013 6:18 am
Forum: Wireless Networking
Topic: hotspots with 2 radius how to config pls ?
Replies: 14
Views: 2531

Re: hotspots with 2 radius how to config pls ?

I don't know what PayPal calls it, but Authorize.net has a "sandbox" (test gateway?) feature. That allows you to test the setup without billing anyone's account until all is working. Did you try that first? I am tryin to use the Sandbox test account on paypal with User Manager in order to test ever...
by imaljko4
Fri Mar 29, 2013 12:42 pm
Forum: Forwarding Protocols
Topic: How to acces my wireless repater from lokal network
Replies: 11
Views: 2733

Re: How to acces my wireless repater from lokal network

OK. Thank you very much for your help. I finally managed to solve it: So the key solution was: 1. 1) you have no default-route on 10.0.5.2. Add a route to 0.0.0.0/0 with gateway 10.0.5.1. 2. I had following firewall entry which was somehow also blocking the access: add action=drop chain=forward comm...
by imaljko4
Wed Mar 27, 2013 1:58 pm
Forum: Forwarding Protocols
Topic: How to acces my wireless repater from lokal network
Replies: 11
Views: 2733

Re: How to acces my wireless repater from lokal network

route added to 10.0.5.2( i did have it in the first place but had removed the route for testing reasons): /ip route> print # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 10.0.5.1 1 1 ADC 10.0.5.0/24 10.0.5.2 bridge1 0 Changed the dstnat rule to: 0 ;;; masquerade hotspot network chain=srcnat...
by imaljko4
Tue Mar 26, 2013 10:23 pm
Forum: Forwarding Protocols
Topic: How to acces my wireless repater from lokal network
Replies: 11
Views: 2733

Re: How to acces my wireless repater from lokal network

After I have added " protocol=tcp" and "to-ports=0-65535 " to the dst-nat rule so now it looks like: chain=dstnat action=dst-nat to-addresses=10.0.5.2 to-ports=0-65535 protocol=tcp dst-address=192.168.5.4 Now I am able to ping at 192.168.5.4., but still I am not able to connect with winbox, telnet o...
by imaljko4
Tue Mar 26, 2013 12:50 am
Forum: Forwarding Protocols
Topic: How to acces my wireless repater from lokal network
Replies: 11
Views: 2733

Re: How to acces my wireless repater from lokal network

Can you do an export /compact of firewall rules on 10.0.5.2? There are no firewall rules created on 10.0.5.2 All firewall rules are at the main router 10.0.5.1 ( i tought i dont need to setup firewall on the repeater, because all is configured on the main router, I did all the setup on the 10.0.5.1...
by imaljko4
Mon Mar 25, 2013 10:55 pm
Forum: Forwarding Protocols
Topic: How to acces my wireless repater from lokal network
Replies: 11
Views: 2733

Re: How to acces my wireless repater from lokal network

Did you configure that 10.0.5.2 can bypass the hotspot? Can you ping from 10.0.5.2 outside of his range (like 8.8.8.8)? Do you have a default route configured in this repeater? Yes bypass is configured for 10.0.5.2 Yes now i have configured the default route on the repeater ( i tought i have to con...
by imaljko4
Mon Mar 25, 2013 7:57 pm
Forum: Forwarding Protocols
Topic: How to acces my wireless repater from lokal network
Replies: 11
Views: 2733

Re: How to acces my wireless repater from lokal network

Please can somebody help me?

I am still stuck and cannot solve it..

thanks
by imaljko4
Mon Mar 25, 2013 7:54 pm
Forum: General
Topic: Hotspot IP-Binding one-to-one NAT
Replies: 3
Views: 3230

Re: Hotspot IP-Binding one-to-one NAT

Hi, I have here a similar scenario but still couldn't figure out how to properly solve it:
http://forum.mikrotik.com/viewtopic.php?f=14&t=71079

Can you please help me out?

thanks
by imaljko4
Sun Mar 24, 2013 2:38 am
Forum: Forwarding Protocols
Topic: How to acces my wireless repater from lokal network
Replies: 11
Views: 2733

How to acces my wireless repater from lokal network

I have following scenario network copy.png RB133(main router) Lokal network: Eth1 192.168.5.3/24 (Internet gateway is 192.168.5.1) Hotspot is running on: wlan1 10.0.5.1/24 (wds enabled) rb411 (wireless repeater) wireles (hotspot from WDS): wlan1 10.0.5.2/24 (wds enabled) So how can i acess my rb411(...
by imaljko4
Sat Mar 16, 2013 9:39 pm
Forum: General
Topic: Winbox 2.2.16 on Windows 7 - Broken drag and drop
Replies: 29
Views: 15856

Re: Winbox 2.2.16 on Windows 7 - Broken drag and drop

Drag & Drop does not work between processes which were started with administrator privileges and normal processes. Probably explorer is running as normal process, but winbox is started with administrator privileges. Yes, in my case, this has solved the problem. I had to start winbox without Adminis...
by imaljko4
Fri Mar 15, 2013 5:12 pm
Forum: The User Manager
Topic: system 5.14 usermanager 4.17 Possible???
Replies: 8
Views: 3447

Re: system 5.14 usermanager 4.17 Possible???

Hello I have Rb493 Ah I want to use ROS 5.14 but I Want to use 4.17 as usermanager... Is it possible? If possible How can I do that... I have tried to downgrade usermanager but because 5.14 is installed It didnt work.... Tried setting up by netinstall but when I click usermanager 4.17 it selects 4....
by imaljko4
Fri Mar 15, 2013 5:07 pm
Forum: The User Manager
Topic: How to keep the old UM V3 ?
Replies: 0
Views: 1277

How to keep the old UM V3 ?

Hi, Is it possible to keep the old User Manager V3, because i find it much faster and easier to use, also it fits much better our needs. At the time I am still using RouterOS v4.17, because if i Upgrade, my current UM will be replaced with the new one. Is there an option to update to the latest Rout...
by imaljko4
Sat Nov 17, 2012 3:42 am
Forum: The Dude
Topic: What is the password to connect to demo Dude?
Replies: 0
Views: 1949

What is the password to connect to demo Dude?

I was trying to connect to the mikrotik demo dude on address: 159.148.147.209 What is the username and password to connect? because i wasn't able to establish a connection. The Dude demo system: Our RouterOS demo routers are viewable from within the Dude, install The Dude and connect to our Demo dud...
by imaljko4
Thu Oct 18, 2012 12:30 pm
Forum: Wireless Networking
Topic: RB951-2n wireless issue
Replies: 8
Views: 4590

Re: RB951-2n wireless issue

I am having a problem with my new RB9521-2n. The signal sometimes drops very low and disconects. When i try to scan for other wireless access points through winbox (to set up the correct chanell), it shows just 2 APs, There is an other access point with "SSID:0101010100011", its 10m away from the RB...
by imaljko4
Mon Aug 27, 2012 2:59 pm
Forum: General
Topic: re: How to monitor the Upload/download rate of clients?
Replies: 7
Views: 8075

re: How to monitor the Upload/download rate of clients?

Hi, Is it possible to moniotor the actual download upload rate of client computers in my network? I am running an internet cafe, with 9 client computers in my network. I am not limiting the Upload/download speed of the client computers, but in case that somebody starts uploading or downloading to mu...
by imaljko4
Sun Aug 05, 2012 2:37 pm
Forum: General
Topic: How to get the "used uptime" for a specific hotspot user?
Replies: 2
Views: 522

How to get the "used uptime" for a specific hotspot user?

I am trying to connect via telnet, and through a command get the "used uptime" for a specific user,
But when i type in following, then nothing happens;
/Ip Hotspot User get user1 uptime
how can i get the "uptime" so that the value is written to the command line?


Thanks
by imaljko4
Fri Aug 12, 2011 11:19 am
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

I solved this problem by close all session in userman and clear all log.
Good, i didn't know that in user-manager 5 there is an option to Force/Close active session.

I found it now, i think this could help.


Thanks
by imaljko4
Wed Aug 10, 2011 2:23 pm
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

Please contact support (support@mikrotik.com), give us remote access to User Manager and HotSpot router and point out problematic username. I don't have that user anymore, cause i had to delete that user and then create it again(so that the user is able to loggin again). But it happened already twi...
by imaljko4
Wed Aug 10, 2011 10:05 am
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

Why do you think "simultaneous session limit reached" is a bug? Perhaps shared-user limit is reached for the particular user (multiple sessions for one username). I think you dint understand my case : There are no Active sessions for that user!!! The user is not logged in at all !!!! There are no m...
by imaljko4
Tue Aug 09, 2011 4:59 pm
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

This has happened first in the log, after that the user was not able to log-in to hotspot anymore, because user manager reported him as active, even though he was not active.
by imaljko4
Tue Aug 09, 2011 4:58 pm
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

There is another bug in the new version. User has logged out, but the User Manager shows the user as active. The user is not possible to log in again, because there is an error "simultaneous session limit reached". Few hours later the user tries again to log in, but still the same error "simultaneou...
by imaljko4
Sun Aug 07, 2011 8:11 pm
Forum: Wireless Networking
Topic: Somebodey hacking in to my router? please help
Replies: 11
Views: 2941

Somebodey hacking in to my router? please help

Hello,

I have very strange logs recently, please explain me what it means, and is somebody trying to brake into my router or what?
I had a few thousands of this logs..., happening every few seconds.


Thanks a lot for help
by imaljko4
Sun Jul 17, 2011 10:44 pm
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

No, it happens again!!
by imaljko4
Sun Jul 17, 2011 2:03 pm
Forum: The User Manager
Topic: Urgent: deny access to http://Router_IP_address/
Replies: 26
Views: 6519

Re: Urgent: deny access to http://Router_IP_address/

Is it also possible to put a custom website to main router page? Instead of the mikrotik default page?
by imaljko4
Sat Jul 16, 2011 1:19 am
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

Upgraded the router-board 433 firmware to latest version, rebuilt the database again, restarted the router 2 times after. Right now the problem seems to be gone, i will still test it and report if the issue happens again. One more question; Until now, the user wouldn't automatically get disconnected...
by imaljko4
Wed Jul 13, 2011 12:02 am
Forum: The User Manager
Topic: Re: Walled garden and GlobeSSL certificate not working
Replies: 4
Views: 1158

Re: Walled garden and GlobeSSL certificate not working

I have found out how to check for the URL-s , and found out that there was one URL missing in my walled garden;
"crl.globessl.com"
Thanks a lot for your explanation and help.

You saved me!!!
by imaljko4
Tue Jul 12, 2011 11:17 pm
Forum: The User Manager
Topic: Re: Walled garden and GlobeSSL certificate not working
Replies: 4
Views: 1158

Re: Walled garden and GlobeSSL certificate not working

You need to look at the certificate and check the CRL and OSCP URLs, and allow those in the walled garden. They are two methods of checking the validity of a certificate, and if it has been revoked. If you can't check whether a certificate has not been revoked you may, depending on security setting...
by imaljko4
Tue Jul 12, 2011 7:33 pm
Forum: The User Manager
Topic: Re: Walled garden and GlobeSSL certificate not working
Replies: 4
Views: 1158

Re: Walled garden and GlobeSSL certificate not working

Thanks I have already added this sites: crt.usertrust.com ocsp.usertrust.com crt.globessl.com ocsp.globessl.com After that Internet explorer worked fine, But safari is still not working. Yes the safari reports an error with "revoked" How could i check which site (address) is being blocked (which add...
by imaljko4
Tue Jul 12, 2011 6:14 pm
Forum: The User Manager
Topic: Re: Walled garden and GlobeSSL certificate not working
Replies: 4
Views: 1158

Re: Walled garden and GlobeSSL certificate not working

Hello, I have a globeSSL certificate for Hotspot signup on UM signup page. The certificate works well if i am already logged in and have full internet access. But when customers access the signup page (before they have logged in), the certificate doesn't work. When using a Safari browser there is a ...
by imaljko4
Mon Jul 11, 2011 10:23 am
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

Thank you very much for support output file.
We are working on it!
Thanks
I am waiting for your help.
by imaljko4
Sun Jul 10, 2011 10:45 pm
Forum: Wireless Networking
Topic: How to setup Frequency correctly
Replies: 1
Views: 494

How to setup Frequency correctly

Hello, I am trying to scan for wireless networks around and then set up Frequency for my Router, which will not interfere with other access points around. Which value should i look at in the scan results? -Signal strength? -Noise Flor? -Signal to Noise? Also if the number (for ex. "signal strength")...
by imaljko4
Sun Jul 10, 2011 8:07 pm
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

Yes, the remove command is missing. When i check with "?", only the following commands are available: /tool user-manager payment>> .. -- go up to user-manager edit -- find -- Find items by value get -- Gets value of item's property print -- Print values of item properties set -- Change item properti...
by imaljko4
Sun Jul 10, 2011 3:02 pm
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

You should be able to use this:
/tool user-manager payments
print
remove X
Replace X with the line number of the payment.
I tried but there is no "remove" command under payments.
I can only print, but not remove
by imaljko4
Sun Jul 10, 2011 12:33 pm
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

Updated to UM 5.5., rebuilt the database, the problem still happens. P.s. In my payment records under " tool user-manager payments print ", there are few payments with user= (unknown) Is there a way how i can delete this payments records, cause maybe this is causing the problem? I am sending you the...
by imaljko4
Thu Jul 07, 2011 4:39 pm
Forum: The User Manager
Topic: PRIMARY KEY must be unique
Replies: 8
Views: 3397

Re: PRIMARY KEY must be unique

What was the solution to your problem? Because I am having exactly the same problem.

Thanks
by imaljko4
Thu Jul 07, 2011 4:37 pm
Forum: The User Manager
Topic: Re: primary key must be unique problem UM 5.4
Replies: 20
Views: 3643

Re: primary key must be unique problem UM 5.4

Hello When trying to add a new user, and assign a profile to that user, I am constantly getting the error "error primary key must be unique". I always have to click 5 times or more until it accepts the user and profile. have a look at the picture. How to fix it? I am using the Usermanager V 5.4 P.s....
by imaljko4
Thu Jun 30, 2011 11:14 pm
Forum: Scripting
Topic: A script that will alert me when a new account is created
Replies: 0
Views: 398

A script that will alert me when a new account is created

Is it possible to create a script that will make an alert or send email, if a new user creates an account via User Manager sign up page .
The script should alert if a new account is created, no mater if the payment was successful or not.?
by imaljko4
Wed Jun 29, 2011 9:48 am
Forum: Wireless Networking
Topic: Re: 3 antenas on RB433, how to setup WDS?
Replies: 8
Views: 1342

Re: 3 antenas on RB433, how to setup WDS?

Good thanks for help.

I will do it without the WDS then.

Because i still don't understand when to use WDS and when not to use it..


Thanks
by imaljko4
Tue Jun 28, 2011 10:46 pm
Forum: Wireless Networking
Topic: Re: 3 antenas on RB433, how to setup WDS?
Replies: 8
Views: 1342

Re: 3 antenas on RB433, how to setup WDS?

Hello

I have 3 antenas in bridge mode and a running hotspot (rb433).
Now do i need to put the antenas in WDS mode (if they are already in the bridge mode)?
And do i need to choose "dynamic" WDS?

Thanks
by imaljko4
Wed Jun 15, 2011 11:49 pm
Forum: The User Manager
Topic: Urgent: deny access to http://Router_IP_address/
Replies: 26
Views: 6519

Re: Urgent: deny access to http://Router_IP_address/

Yes, I need it to.

Can i use your files on RouterOS versions 4.17 and 5.4 ?

P.s I am using RB433


I also want to:
deny access to HTTPS://router
Allow access to HTTPS://router/usermanager


Thank a lot
by imaljko4
Sun Jun 12, 2011 1:46 am
Forum: The User Manager
Topic: Configure user-manager on remote Mikrotik router
Replies: 6
Views: 4024

Re: Configure user-manager on remote Mikrotik router

So each router should be another subscriber?

Or can i make a sub-customer for each router?
by imaljko4
Sun Jun 12, 2011 1:23 am
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

I have now made following changes: -Upgraded from 4.17, to 5.4 - Until now i was using 1 subscriber and 3 sub-customers under it, the sub-customers had different profiles, obviously this didn't work well, so i had to create just 1 subscriber per router (without the sub-costomers), because i guess th...
by imaljko4
Sat Jun 11, 2011 8:52 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

Mikrotik Please, This is a shame!!! I am losing my customers with paypal payments, because of UM bugs !!! I am using User manager the new version for paypal payments and sometimes it just doesnt work!!!. I had to refund already a few clients(users) because of that!!! I am having 3 bugs with payments...
by imaljko4
Mon Jun 06, 2011 4:51 pm
Forum: The User Manager
Topic: Configure user-manager on remote Mikrotik router
Replies: 6
Views: 4024

Re: Configure user-manager on remote Mikrotik router

Thank you for your help.

Do all the routers need to have the same RouterOS version? or can i have the remote Router (UM databease) with RouterOS V 5.4,

and the rest routers would stay on RouterOS 4.17. ?

Is that possible and will in this case the synchronization with UM database still work?

Thanks
by imaljko4
Sun Jun 05, 2011 2:19 pm
Forum: The User Manager
Topic: Configure user-manager on remote Mikrotik router
Replies: 6
Views: 4024

Configure user-manager on remote Mikrotik router

Hello, I have 3 Hotspots on different locations and one User-manager database on a remote Location. I have already opened ports 1812 and 1813 on the remote network with User-manager database. But do i need to configure different ports for each hotspot or will they all 3 be able to connect using same...
by imaljko4
Sun Aug 22, 2010 4:33 pm
Forum: General
Topic: How to open all ports for a particular hotspot user?
Replies: 14
Views: 1759

Re: How to open all ports for a particular hotspot user?

When i disable the "masquerade" of my hotspot network, then hotspot doesn't work anymore. So what exactly do i need to do? My Network is as follows: ip address>> print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 192.168.3.2/24 192.168.3.0 255.255.255.0 ether...
by imaljko4
Fri Aug 20, 2010 4:31 pm
Forum: General
Topic: How to open all ports for a particular hotspot user?
Replies: 14
Views: 1759

Re: How to open all ports for a particular hotspot user?

Several older VPN protocols could break with double NAT (PPTPv3 and IPsec with NAT-T should be able to handle even that fine). So maybe this is the problem, My hotspot network is under "masquerade", but my mirkotik router is behind another router which is then connected to WAN -Internet. So if i Un...
by imaljko4
Fri Aug 20, 2010 1:46 pm
Forum: General
Topic: How to open all ports for a particular hotspot user?
Replies: 14
Views: 1759

Re: How to open all ports for a particular hotspot user?

Yes the users are logged in to hotspot, they surf the net and download emails without problems. But when they try to make an outgoing VPN connection it fails.
When i connect the users directly to my local network with a cable(without hotspot), then the VPN works.
by imaljko4
Fri Aug 20, 2010 1:23 pm
Forum: General
Topic: How to open all ports for a particular hotspot user?
Replies: 14
Views: 1759

How to open all ports for a particular hotspot user?

Hello, Sometimes i need to open all ports for one particular hotspot user(have full internet access TCP/UDP without firewall). What command should i use to do it, if the users IP address is for example 10.0.0.23 ? The users on my hotspot have problems when trying to make outgoing VPN connections, so...
by imaljko4
Mon Aug 09, 2010 1:39 pm
Forum: The User Manager
Topic: user Manager-test 4.10 doesnt want to install
Replies: 8
Views: 2781

Re: user Manager-test 4.10 doesnt want to install

no sorry, the link you provided is not working.
It says: 404 - Not Found
by imaljko4
Mon Aug 09, 2010 1:36 pm
Forum: The User Manager
Topic: user Manager-test 4.10 doesnt want to install
Replies: 8
Views: 2781

Re: user Manager-test 4.10 doesnt want to install

Where can i download mikrotik routerOS version 4.10??
by imaljko4
Mon Aug 09, 2010 1:25 pm
Forum: The User Manager
Topic: user Manager-test 4.10 doesnt want to install
Replies: 8
Views: 2781

Re: user Manager-test 4.10 doesnt want to install

I probably should use also User-manager test v 4.11, but i couldnt find the link to User-manager test v4.11
by imaljko4
Mon Aug 09, 2010 1:20 pm
Forum: The User Manager
Topic: user Manager-test 4.10 doesnt want to install
Replies: 8
Views: 2781

Re: user Manager-test 4.10 doesnt want to install

I am using routerOS version 4.11, User-manager test v.4.10
by imaljko4
Mon Aug 09, 2010 1:18 pm
Forum: The User Manager
Topic: user Manager-test 4.10 doesnt want to install
Replies: 8
Views: 2781

user Manager-test 4.10 doesnt want to install

i had to uninstalled my User-Manager-test 4.10 because of some problems. Now i am trying to install it again, i have uploaded the User-man file to ftp server, but when i reboot the router it doesnt install. I have tried several times but it doesnt want to install the package. how can i force the ins...
by imaljko4
Mon Aug 09, 2010 12:57 pm
Forum: The User Manager
Topic: Sending e-mail to hotspot users manually; How to?
Replies: 6
Views: 2183

Re: Sending e-mail to hotspot users manually; How to?

thank you!

Can you give me a link where i can find all the parameters that I am able to input to get user- manager data.

I am using userman-test 4.10

Thank you
by imaljko4
Fri Aug 06, 2010 9:58 am
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

I agree...
by imaljko4
Sun Aug 01, 2010 10:20 am
Forum: The User Manager
Topic: Sending e-mail to hotspot users manually; How to?
Replies: 6
Views: 2183

Re: Sending e-mail to hotspot users manually; How to?

ok, but with which command will I get user data from user-manager?

(username, password, money paid, prepaid time...etc..)
Because this e-mail should contain user data.
by imaljko4
Fri Jul 30, 2010 2:02 pm
Forum: The User Manager
Topic: Sending e-mail to hotspot users manually; How to?
Replies: 6
Views: 2183

Sending e-mail to hotspot users manually; How to?

Is it possible to send e-mails with login details to users manually? The e-mail is being send automatically when somebody sings up online. But if I add a user manually, how can i send e-mail to that user? is there a command or a script which I can use to tell User-manager to send the e-mail to user.
by imaljko4
Fri Jul 30, 2010 1:30 pm
Forum: The User Manager
Topic: After adding firewall rules, signup page is not working
Replies: 10
Views: 4495

Re: After adding firewall rules, signup page is not working

Do you think my router is now secure with these firewall entries? I am constantly getting strange logs, so I wonder if somebody is trying to hack int my router. Please look at the logs attached. Also i had some user that was connecting to hotspot and when i look at his IP address the address was cha...
by imaljko4
Fri Jul 30, 2010 1:10 pm
Forum: The User Manager
Topic: Can't access Signup without login?
Replies: 13
Views: 6512

Re: Can't access Signup without login?

if I use my routers external IP, I can access the signup page/userman/etc after logging in. I think you need to add your external IP address to walled garden: /ip hotspot walled-garden ip add action=accept comment="" disabled=no dst-address="your external IP" Input your IP address under "your exter...
by imaljko4
Wed Jul 28, 2010 11:40 pm
Forum: The User Manager
Topic: After adding firewall rules, signup page is not working
Replies: 10
Views: 4495

Re: After adding firewall rules, signup page is not working

Its a bit hard to explain, i will try. Please look at the picture below, that is my network. "VPN-Bridge interface" is actually ethernet1 interface (lokal network 192.168.3.0). Its called VPN bridge because i added the Open VPN and ethernet 1 to the same bridge. But right now Open VPN is disabled, s...
by imaljko4
Wed Jul 28, 2010 11:15 pm
Forum: The User Manager
Topic: After adding firewall rules, signup page is not working
Replies: 10
Views: 4495

Re: After adding firewall rules, signup page is not working

I have added the rule, and the link to the signup page works now, but i have another problem: The sign-up process become unstable. If I wait on one of the pages to long and then i click on continue or singup button, the next page which should follow fails to load (please look at the photo) When i th...
by imaljko4
Wed Jul 28, 2010 10:42 am
Forum: The User Manager
Topic: After adding firewall rules, signup page is not working
Replies: 10
Views: 4495

Re: After adding firewall rules, signup page is not working

Ok i will add that rule.

Thanks a lot for your help
by imaljko4
Wed Jul 28, 2010 12:49 am
Forum: The User Manager
Topic: After adding firewall rules, signup page is not working
Replies: 10
Views: 4495

Re: After adding firewall rules, signup page is not working

Yes I am using User Manager V 4.10 Beta, on the same router. Here are the prints: When a user tries to access the signup and is blocked by firewall i get the following log: 23:37:13 firewall,info DROP INPUT input: in:vpn-bridge out:(none), src-mac 00:1f:3f:30:49:1f, proto TCP (SYN), *my public IP*:1...
by imaljko4
Wed Jul 28, 2010 12:31 am
Forum: The User Manager
Topic: After adding firewall rules, signup page is not working
Replies: 10
Views: 4495

Re: After adding firewall rules, signup page is not working

add chain=input src-address=159.148.172.192/28 comment="From Mikrotikls network" So this should be address of my private lokal network? add chain=input src-address=10.0.0.0/8 comment="From our private LAN" This should be address of the WLAN- Hotspot network ( hotspot users are connecting to this ne...
by imaljko4
Wed Jul 28, 2010 12:24 am
Forum: The User Manager
Topic: After adding firewall rules, signup page is not working
Replies: 10
Views: 4495

After adding firewall rules, signup page is not working

Hello i have added the firewall rules like described in the wiki: http://wiki.mikrotik.com/wiki/Securing_your_router But after adding this rules, the users are not able to access the signup page anymore. I am using singup page with user Manager for payments with paypal. Can somebody explain me what ...
by imaljko4
Mon Jul 26, 2010 11:53 am
Forum: General
Topic: How to protect router: acces only from specified address?
Replies: 5
Views: 1144

Re: How to protect router: acces only from specified address

Try adding this. /ip hotspot walled-garden ip add action=accept protocol=tcp src-address=192.168.3.100 dst-address=192.168.3.1 dst-port=8291 If possible, post more info regarding your configuration so we may help. Thanks. But what i am trying to do is disable access to router from hotspot network. ...
by imaljko4
Mon Jul 26, 2010 11:10 am
Forum: General
Topic: How to protect router: acces only from specified address?
Replies: 5
Views: 1144

How to protect router: acces only from specified address?

Hello, How can i allow access to router only from a specified IP address? I tried to do following: Please look at the picture below. Also i tried to add the firewall rules as described here http://wiki.mikrotik.com/wiki/Securing_your_router But still when I connect to hotspot I am able to access the...
by imaljko4
Sat Jul 24, 2010 5:41 pm
Forum: The User Manager
Topic: Re: paypal and sending email doesnt work
Replies: 8
Views: 2163

Re: paypal and sending email doesnt work

Finally solved! I had to input my own email under subscribers(customers) "private information". Now sending of email works. One more question, can the email also be sent via User Manager if I am manually adding a user? The email is only sent if the user is buying account online. How can i send the e...
by imaljko4
Fri Jul 23, 2010 3:07 pm
Forum: The User Manager
Topic: How to make 2 subscribers? I tried but no sucess Urgent!!
Replies: 5
Views: 1567

Re: How to make 2 subscribers? I tried but no sucess Urgent!

I guess i have solve it now. i have created a new customer under the subscriber. I have disabled access to parent profiles for that customer. Now i can create profiles on that customer which will be only for online signup. The rest of the profiles will not be visible at the signup page, because they...
by imaljko4
Fri Jul 23, 2010 12:06 am
Forum: The User Manager
Topic: How to make 2 subscribers? I tried but no sucess Urgent!!
Replies: 5
Views: 1567

Re: How to make 2 subscribers? I tried but no sucess Urgent!

Please help me because i have now a big confusion with accounting. I am using new user manager-beta version. I am trying to use 2 subscribers for the same router and on the same hotspot. 1. Subscriber1 would contain profiles( credits) that will be available on the singup page. 2. Subscriber2 would c...
by imaljko4
Thu Jul 22, 2010 9:19 pm
Forum: The User Manager
Topic: How to make 2 subscribers? I tried but no sucess Urgent!!
Replies: 5
Views: 1567

Re: How to make 2 subscribers? I tried but no sucess Urgent!

 / tool user-manager router add subscriber=NEW-Subscriber ip-address=HOTSPOT-IP shared-secret=xxxxxx
You can create more than one...there's no problem with these two rules..
when i input the the second code, i get the error :

Failure: ip address is already used
by imaljko4
Thu Jul 22, 2010 7:28 pm
Forum: The User Manager
Topic: How to make 2 subscribers? I tried but no sucess Urgent!!
Replies: 5
Views: 1567

How to make 2 subscribers? I tried but no sucess Urgent!!

Hello i have made two subscribers, both with owner permissions. But how do i add both of them to hotspot? The hotspot and usermanager are running on local router. I have been able to add one subscriber to work with hotspot, but when i try to add the second subscriber it fails. Under the subscriber i...
by imaljko4
Wed Jul 21, 2010 11:15 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

Hello, I have a big problem. I have created 3 profiles that are for the paypal payments, and appear on sing up page. I have many time clients that have different needs, so I make a deal with the client individually and create a separate profile for that client that meets his needs. But as soon i cre...
by imaljko4
Tue Jul 20, 2010 11:18 am
Forum: General
Topic: How to adjust rate limit for hotspot users?
Replies: 5
Views: 2828

Re: How to adjust rate limit for hotspot users?

Hello again, My scenario is following: My ADSL speed : 4M download/ 256k Upload 1)I would like to give the users full speed for surfing : 256k=rx/4M=tx for the first 10-20 seconds 2) after that limit the users at: 50k=rx/1M=tx (if downloading/uploading constantly) 3)And then again recharge the Burst...
by imaljko4
Tue Jul 20, 2010 10:36 am
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

Must all profiles that I create be available at the UM sign up Page?

I have just tree profiles that are for the UM signup page, how can i disable the rest 6 profiles from appearing on the UM singup-page?

Please answer me

Thank you
by imaljko4
Sat Jul 17, 2010 10:50 pm
Forum: General
Topic: How to adjust rate limit for hotspot users?
Replies: 5
Views: 2828

Re: How to adjust rate limit for hotspot users?

But, am I able to make the above scenario with Burst rate ? I can give the burst rate under User profiles (and it will apply for the whole hotspot)? Or i can give the burst rate under User Manger aswell. But what should exactly input for the Burst rate? I could input the Burst rate to be double time...
by imaljko4
Sat Jul 17, 2010 7:11 pm
Forum: General
Topic: How to adjust rate limit for hotspot users?
Replies: 5
Views: 2828

How to adjust rate limit for hotspot users?

Can somebody give me an example for a good rate limit for hotspot users. I would like to give a high rate for browsing, and then reduce the rate if somebody is downloading (torrents etc..) I have a network with DSL speed 4M/310K I have limited the users now to Rx/Tx = 100k/1M But i would like to giv...
by imaljko4
Fri Jul 16, 2010 10:31 pm
Forum: General
Topic: Re: How to secure my Hotspot setup?
Replies: 10
Views: 5315

Re: How to secure my Hotspot setup?

Yes, this has helped. Now it works fine.

Thank you!
by imaljko4
Fri Jul 16, 2010 6:44 pm
Forum: General
Topic: Re: How to secure my Hotspot setup?
Replies: 10
Views: 5315

Re: How to secure my Hotspot setup?

Thank you, but with this scenario the hotspot users will still be able to acces my ADSL-Router-Modem Page (192.168.3.1)?

Am I able to disable this as well?
by imaljko4
Fri Jul 16, 2010 6:33 pm
Forum: General
Topic: Re: How to secure my Hotspot setup?
Replies: 10
Views: 5315

Re: How to secure my Hotspot setup?

Ok. here are the exports: /ip firewall> export # jul/16/2010 17:26:33 by RouterOS 4.10 # software id = ****** # /ip firewall connection tracking set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \ tcp-close-wait-timeout=10s tcp-established-timeout=1d \ tcp-fin-wait-timeout=1...
by imaljko4
Fri Jul 16, 2010 5:48 pm
Forum: General
Topic: Re: How to secure my Hotspot setup?
Replies: 10
Views: 5315

Re: How to secure my Hotspot setup?

Ok. I have added the drawing of my network. I am not very advanced with the Mikrotik firewall, so dont know exactly what should i input. At the moment hotspot users that are using hotspot are able to ping and access local network adresses (192.168.0.0.) I would like to disable it. I have put default...
by imaljko4
Fri Jul 16, 2010 4:13 pm
Forum: General
Topic: Re: How to secure my Hotspot setup?
Replies: 10
Views: 5315

Re: How to secure my Hotspot setup?

The Hotspot is the layer 3 hop and does NOT get involved in local network traffic. I tried it my self, and when i sing in to hotspot I am able to access my loacal addresses for example my ADSL-Modem-router 192.168.0.1. How do i disable it, i dont want the hotspot users to be able to access loacal n...
by imaljko4
Fri Jul 16, 2010 12:40 am
Forum: General
Topic: Re: How to secure my Hotspot setup?
Replies: 10
Views: 5315

Re: How to secure my Hotspot setup?

Hello,

How do i disable the users that are connecting to hotspot (which is on the wireless interface) from being able to access local network addresses.

Also how do i disable the wireless (hotspot) users from being able to access each others addresses (and shared resources) ?

Thank you
by imaljko4
Wed Jul 14, 2010 11:40 pm
Forum: RouterBOARD hardware
Topic: RB 433 and 3 x DCMA-82 cards dont fit
Replies: 8
Views: 1443

Re: RB 433 and 3 x DCMA-82 cards dont fit

a very dangerous workaround that can impact the longevity of your installation
So what would you suggest? this is what my reseller suggested me to buy.

Do you mean its dangerous if the cards are touching each other or what?
by imaljko4
Tue Jul 13, 2010 9:07 pm
Forum: RouterBOARD hardware
Topic: RB 433 and 3 x DCMA-82 cards dont fit
Replies: 8
Views: 1443

Re: RB 433 and 3 x DCMA-82 cards dont fit

Finally i managed.
I just had to pull the 2 little connectors( card holders) up.
And its working now fine, all 3 cards fit.

thanks for advice
by imaljko4
Tue Jul 13, 2010 8:10 pm
Forum: The User Manager
Topic: Re: paypal and sending email doesnt work
Replies: 8
Views: 2163

Re: paypal and sending email doesnt work

It is still not working, i don't know to use the sniffer, and how to run it..? Is it possible to create my own script for send e-mail, and then schedule it to run each time someone signs up via User Manager? P.s. can you send me a link to sniffer documentation, because don't know how to use it. Than...
by imaljko4
Sun Jul 11, 2010 3:55 pm
Forum: RouterBOARD hardware
Topic: RB 433 and 3 x DCMA-82 cards dont fit
Replies: 8
Views: 1443

Re: RB 433 and 3 x DCMA-82 cards dont fit

Should i try to use force, and lock the cards down with force, maybe they will fit then, but they will be touching each other ( one card will be laying on the next card - this is probably not good).
P.s. has anybody managed to input 3 of the DCMA-82 cards?

Otherwise i will have to exchange the cards.
by imaljko4
Sat Jul 10, 2010 4:07 pm
Forum: RouterBOARD hardware
Topic: RB 433 and 3 x DCMA-82 cards dont fit
Replies: 8
Views: 1443

RB 433 and 3 x DCMA-82 cards dont fit

Hello, I bought routerboard 433 and 3 x DCMA-82 cards to be able to connect 3 Antennas. But seems that the DCMA-82 card is not thin enough, so I am not able to put all 3 cards in the slots next to each other. I am only able to input 2 cards. The one slot in the middle i have to skip, because otherwi...
by imaljko4
Wed Jul 07, 2010 10:34 pm
Forum: General
Topic: Transfere settings from rb433 to rb133
Replies: 13
Views: 1427

Re: Transfere settings from rb433 to rb133

No, unless the file from which it was imported is still in the file system on the router, in which case you can copy the key and cert file off.
I have the certificate file , but i dont have the private-key.pem file anymore.

So, what to do now? Can i re-create the private-key.pem file?


Thanks
by imaljko4
Wed Jul 07, 2010 3:52 pm
Forum: General
Topic: Transfere settings from rb433 to rb133
Replies: 13
Views: 1427

Re: Transfere settings from rb433 to rb133

One more question:

Is there a way how i can export the certificate and transfer it to new routerbaord?

thank you
by imaljko4
Wed Jul 07, 2010 2:21 pm
Forum: General
Topic: Transfere settings from rb433 to rb133
Replies: 13
Views: 1427

Re: Transfere settings from rb433 to rb133

Thank you very much, yes now i managed with copy pasting.


Thank you
by imaljko4
Wed Jul 07, 2010 12:31 pm
Forum: General
Topic: Transfere settings from rb433 to rb133
Replies: 13
Views: 1427

Re: Transfere settings from rb433 to rb133

ok.
You explained me how to export the settings. But how do i Import it then to the new board? Which command do i use?
Please explain me more detailed.

Thanks
by imaljko4
Thu Jun 24, 2010 10:48 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

Is there a way how i can force Fireofx to remember password for UM 4.9 test?

so that my employees don't have to enter the password each time they need to login to User Manager.

Thank you
by imaljko4
Mon Jun 21, 2010 5:12 pm
Forum: General
Topic: RE: Configure 2 mikrotik routers to run the same hotspot?
Replies: 4
Views: 548

Re: RE: Configure 2 mikrotik routers to run the same hotspo

Hotspots should be the layer 3 hop for the users, so no, you shouldn't run one Hotspot in front of both routers. Sorry i didnt understand your reply. what is the layer 3 hop? How you mean run one Hotspot in fron of both routers? What i was asking if i can have the same hotspot on both routers, inst...
by imaljko4
Mon Jun 21, 2010 4:32 pm
Forum: General
Topic: RE: Configure 2 mikrotik routers to run the same hotspot?
Replies: 4
Views: 548

Re: RE: Configure 2 mikrotik routers to run the same hotspo

Ok. So the only option is to use User Manager? Is there also the option to have the same hotspot running on both Routers? I have some users that i assign directly in winbox, so I would like that this users also are able to connect to the second hotspot. (Ok. I understand that users that are assigned...
by imaljko4
Mon Jun 21, 2010 12:26 pm
Forum: General
Topic: RE: Configure 2 mikrotik routers to run the same hotspot?
Replies: 4
Views: 548

RE: Configure 2 mikrotik routers to run the same hotspot?

Hello, I have the following network setup; please look at the picture. In my scenario I am having 2 hotspots, so for each hotspot I have to add separate users. Is it possible to have just 1 hotspot for both routers? so that for example: If a user is created on the first hotspot, he can also log in t...
by imaljko4
Wed Jun 09, 2010 10:39 pm
Forum: The User Manager
Topic: Re: paypal and sending email doesnt work
Replies: 8
Views: 2163

Re: paypal and sending email doesnt work

Are you trying to the send the e-mail to the same recipient? Maybe person specified wrong e-mail during signup, User Manager uses /tool e-mail to send e-mails. No i tried with at least 10 different emails and all were unsucessfull, and also every time a customer signs up, it always says error sendi...
by imaljko4
Sun Jun 06, 2010 1:50 am
Forum: The User Manager
Topic: Re: paypal and sending email doesnt work
Replies: 8
Views: 2163

Re: paypal and sending email doesnt work

Please can somebody explain me?

When I am sending an email from Winbox (new terminal) it works fine, so i guess the smtp mail server is working fine.

But why does the User Manager fail to send mails to customers (error sending email: invalid TO address)?
by imaljko4
Sat Jun 05, 2010 12:08 am
Forum: General
Topic: Hotspot with more than one radius/userman
Replies: 5
Views: 4110

Re: Hotspot with more than one radius/userman

So if I am adding the VAP interface, do i assign the same Ip adress to it, as to the wlan1 interface?
And also the SSID do i give it the same ssid as on the wlan1 interface?

Thank you
by imaljko4
Thu Jun 03, 2010 9:12 pm
Forum: The User Manager
Topic: Re: paypal and sending email doesnt work
Replies: 8
Views: 2163

Re: paypal and sending email doesnt work

Any idea somebody?

I still didn't get it to work.
by imaljko4
Wed Jun 02, 2010 11:32 pm
Forum: The User Manager
Topic: SSL Payment page and public IP, How to protect my router?
Replies: 6
Views: 1792

Re: SSL Payment page and public IP, How to protect my router

So if i want to use paypal payment with user manager i have to leave the router open for ssl connection to signup and user manager pages.

So you are saying that it is not possible to close the connections from outside to routers Webbox page?
by imaljko4
Tue Jun 01, 2010 10:00 pm
Forum: The User Manager
Topic: SSL Payment page and public IP, How to protect my router?
Replies: 6
Views: 1792

Re: SSL Payment page and public IP, How to protect my router

Use firewall and disallow access to ports 80/443 from outside (in-interface=public_interface). But the users need to have access from outside, just not for all pages. They need to be able to access the page : https://mydomain.com/user - they need to be able to access it on public ip, because otherw...
by imaljko4
Tue Jun 01, 2010 1:04 am
Forum: The User Manager
Topic: SSL Payment page and public IP, How to protect my router?
Replies: 6
Views: 1792

SSL Payment page and public IP, How to protect my router?

I have enabled SSL connections to my router (to my public IP) to be able to use payments. But now everybody can access my router login page and also the usermanager page from internet. Is it possible to enable access from outside just for specific pages, example: I want to enable access to: https://...
by imaljko4
Mon May 31, 2010 3:05 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

As i told you I am not limiting users in advance, I am trying to give them maximum speed etc. Because i have just few users so i dont have to limit them in advance. I am asking in case my network gets stuck because of some user that is downloading for ex. torrents, how can i limit that specific user...
by imaljko4
Mon May 31, 2010 11:09 am
Forum: General
Topic: Transfere settings from rb433 to rb133
Replies: 13
Views: 1427

Transfere settings from rb433 to rb133

Is it possible to make a backup on rb433 and then transfere it and restore on rb133?

I have tried to do it with backup and restore, but I am not able to restore the backup file on rb133, I am getting an error message.

Both of the routerboards have the same routerOS version
by imaljko4
Mon May 31, 2010 11:00 am
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

There should be separate profile for the specific customer then. The problem is that all profiles are visible on the signup paypal payment page. So if i would create a single profile for that user, this profile would show up also at the signup (payment) page. So some user could make a mistake and b...
by imaljko4
Fri May 28, 2010 3:57 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

Use Profiles to configure Rate-Limit for the users. I have created rate limits under Profiles- Limitations. But I am not able to apply this limit to a specific user that has already bought credits. This rate limits apply only for the whole profile but cannot add the limit just for one user for exam...
by imaljko4
Fri May 28, 2010 3:21 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.0 test package

I am using User Manager test 4.9.

So how do i make the rate limit to a specific user?
If i click on the user i want to make the limit to, i don't have the option for rate limit.
Also here is the "Money Paid" problem:
User_manager.jpg
by imaljko4
Fri May 28, 2010 11:17 am
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Re: User Manager v4.9 test package

So its not possible to give a rate limit directly to a user? In the new User Manager I can only make a rate limit to a credit which I will give to a user. But i usually don't limit the users rates in advance, only in case i have an overload then i go and make a rate limit on the user that is downloa...
by imaljko4
Thu May 27, 2010 4:24 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 269
Views: 72999

Paypal payments problem on UM 4.9 test

Everything works fine when somebody buys credit over paypal, exept for that under "Paid Money" its written "0.00" although the user has successfully paid and is already using the hotspot. Also when the user logs in to his User page, under "Money paid" there is also written "0.00". I am also getting ...
by imaljko4
Fri May 21, 2010 11:49 am
Forum: The User Manager
Topic: Re: User Manager Stable version?
Replies: 3
Views: 1323

Re: User Manager Stable version?

Thank you for your answere.
One last question:
Can i use the test version also for paypal and secure payments?
Or is it better to stay with the old version?

Thank you
by imaljko4
Fri May 21, 2010 1:38 am
Forum: The User Manager
Topic: Re: User Manager Stable version?
Replies: 3
Views: 1323

Re: User Manager Stable version?

Hello, Which User Manager version is stable and secure to use for Payments? I have upgraded my routerOS to version 4.9, and when i go to System package print it shows that i have User Manager 4.9 installed. But when i log to User Manager, it looks the same as the old 3. version. So i guess I still h...
by imaljko4
Mon May 17, 2010 5:05 pm
Forum: The User Manager
Topic: Add dynamic Public router adrress to walled garden problem
Replies: 2
Views: 1335

Re: Add dynamic Public router adrress to walled garden probl

but this script is for radius server. How do i make a script that will change my Dynamic IP entry, which is in the Walled garden? Edit: Ok i finally managed to recreate the script and make it to change my IP entry in walled garden. Here is how i did it if somebody else needs it: /system script add n...
by imaljko4
Mon May 17, 2010 1:42 pm
Forum: The User Manager
Topic: Paypal: configure return URL to redirect back to login page
Replies: 2
Views: 1620

Re: Paypal: configure return URL to redirect back to login p

Of course i already have enabled ssl and i have a signed certificate. The problem is that the return URL brings the customer to the user page, and not to the login page. And i cannot make a secure ssl connection to the login page. If I enable under hotspot the HTTPS login and make a https link to th...
by imaljko4
Sun May 16, 2010 1:07 pm
Forum: The User Manager
Topic: Add dynamic Public router adrress to walled garden problem
Replies: 2
Views: 1335

Add dynamic Public router adrress to walled garden problem

Hello, I am having a dynamic address as my public router adress. I have setup a dynamic domain name for my address ex. mydomain.dyndns.org. My Problem is how to add this address to Walled garden in hotspot corectly? I am trying to setup paypal with secure ssl page and Usermanager. If i put in walled...
by imaljko4
Sat May 15, 2010 7:28 pm
Forum: The User Manager
Topic: Adjust minimum session time
Replies: 9
Views: 2932

Re: Adjust minimum session time

ok. Thank you for your help :D
by imaljko4
Sat May 15, 2010 5:56 pm
Forum: The User Manager
Topic: Adjust minimum session time
Replies: 9
Views: 2932

Re: Adjust minimum session time

Well i will not explain one more time, i have already done for several time. If you don't understand me, than please don't call me a cheater because this is not nice. And of course the customers would know that they have a minimum time per session. In my cafe the customers are paying per blocks of 1...
by imaljko4
Sat May 15, 2010 1:57 am
Forum: The User Manager
Topic: Paypal: configure return URL to redirect back to login page
Replies: 2
Views: 1620

Paypal: configure return URL to redirect back to login page

Hello, I would like to have the return URL in paypal to bring the customers to the login page. How to do that? If i put in the return URL ex.: 10.0.0.1/login.html or www.google.hr (this will also redirect them to login page), then i get a warning message from PayPal when i press on the "Return to me...
by imaljko4
Sat May 15, 2010 1:41 am
Forum: The User Manager
Topic: paypal gateway button
Replies: 10
Views: 3075

Re: paypal gateway button

Hello I am having exactly the same problem. My return URL is working fine if i copy and past it in the browser. But when i click on the return to Merchant link after the payment with pay pal, i also get the error message: As though the page is not accessible. But if i click on try again in Firefox, ...
by imaljko4
Fri May 14, 2010 9:57 pm
Forum: The User Manager
Topic: Adjust minimum session time
Replies: 9
Views: 2932

Re: Adjust minimum session time

No, you didn't understand me. I am selling accounts that have uptime limit 5 hours, but they can be used over a month period. So i have some customers that than buy this 5 hours, come everyday, use the internet just for few minutes to send and receive mails, and then still sit in the internet for ho...
by imaljko4
Thu May 13, 2010 4:39 pm
Forum: General
Topic: HotSpot with 2 radius servers?
Replies: 8
Views: 1780

Re: HotSpot with 2 radius servers?

Thanks for your answers. I will try to configure it. But just to make sure: I would like to use: 1) 1st radius server -User manager which is running locally on the rb433 and i would configure it for pay pal payments, and for prepaid vouchers. 2)2nd radius server- is a remote server which would deal ...
by imaljko4
Tue May 11, 2010 3:44 pm
Forum: Scripting
Topic: Creating a radius server for credit card payments
Replies: 1
Views: 856

Creating a radius server for credit card payments

Hello, I have a HotSpot running on RB433. I would like to integrate payments for hotspot with credit cards in Croatia. I already have a Payment Gateway, but how to make a radius server which will make authorizations? Can i make a radius server on my own, or do i have to buy one from some hotspot com...
by imaljko4
Tue May 11, 2010 3:34 pm
Forum: General
Topic: HotSpot with 2 radius servers?
Replies: 8
Views: 1780

HotSpot with 2 radius servers?

Hello, Can i configure my HotSpot to use two radius servers? I want to keep user manager (for PayPal payments)as one radius server, and would like to have another radius server for credit card payments. I have a rb433 with Hotspot and UserManager running on it. How do i add another radius server on ...
by imaljko4
Wed Sep 16, 2009 9:33 pm
Forum: The User Manager
Topic: Paypall: After succesfull payment, Return URL fails
Replies: 7
Views: 2411

Re: Paypall: After succesfull payment, Return URL fails

*) Does the email address contain some specific characters? Space? Dashes? Dots? Letters other than Latin? No, i have tried with more email adresses ex. myemailadress@email.t-com.hr and my_email_adress@yahoo.com but when i try to send a mail from winbox to the same email adress, then it works. *) D...
by imaljko4
Mon Sep 14, 2009 1:38 pm
Forum: The User Manager
Topic: Authorize.net payment system ready!
Replies: 15
Views: 20670

Re: Authorize.net payment system ready!

Is it possible to use authorize.net in Croatia?

thanks
by imaljko4
Sun Sep 13, 2009 8:30 pm
Forum: The User Manager
Topic: Re: User Manager with Paypal and credit cards?
Replies: 0
Views: 694

Re: User Manager with Paypal and credit cards?

Hello Until now, i was using an Paypal to recieve paypal payments, but i would also like that customers can pay with credit cards. On my paypal account i have the busines/ "website payment standard" and "Website payments pro" feature. With this feature it is possible to receve payments from credit c...
by imaljko4
Sat Sep 12, 2009 10:40 pm
Forum: The User Manager
Topic: Re: paypal and sending email doesnt work
Replies: 8
Views: 2163

Re: paypal and sending email doesnt work

Hello I have setup up paypal with user Manager, but the sending of email to users, with their login details doesnt work . In winbox it says "error sending email: invalid TO address" when i try to send a test email from winbox like this: /tool e-mail send to=xxx@yahoo.com body=hello then the sending ...
by imaljko4
Tue Sep 08, 2009 2:24 pm
Forum: The User Manager
Topic: Paypall: After succesfull payment, Return URL fails
Replies: 7
Views: 2411

Re: Paypall: After succesfull payment, Return URL fails

I have made this testings: When I copy the URL https://xxx.xxx.xxx.xxx/user?startpage=21&page=start and paste it in browser then it works. When i click on the same link from paypal ( i click on the button "return to merchant") it doesnt work the first time, but when i click try again then it works. ...
by imaljko4
Mon Sep 07, 2009 12:30 pm
Forum: The User Manager
Topic: Paypall: After succesfull payment, Return URL fails
Replies: 7
Views: 2411

Re: Paypall: After succesfull payment, Return URL fails

I have already added all the addresses to walled garden, as described in the wiki.mikrotik.com. Also i already have added the routers public address (domain) to walled garden. Only i didnt add the routers local ip address to walled garden, but i have configured the signup link to use the public addr...
by imaljko4
Mon Sep 07, 2009 12:07 am
Forum: The User Manager
Topic: Paypall: After succesfull payment, Return URL fails
Replies: 7
Views: 2411

Paypall: After succesfull payment, Return URL fails

Hello i have setup usermanager and paypal as described in the wiki. Everything works fine, but after i make the payment with paypal, and then click the "Return To Merchant" link, it fails to return. There comes error message: Problem Loading the page, and i can click on try again. When i click try a...
by imaljko4
Sun Aug 30, 2009 12:39 am
Forum: General
Topic: hotspot; Custom login page: How to make send mail form?
Replies: 2
Views: 987

hotspot; Custom login page: How to make send mail form?

Hello, I am trying to make a custom login page for the hotspot. How can i create a form for the customers to be able to send an email to administrator? I mean they would need to be able to send the mail via the html login Page , because they wount be able to use their mail client, in case they didnt...
by imaljko4
Fri Aug 28, 2009 6:53 pm
Forum: The User Manager
Topic: Ability to edit User Manager pages?
Replies: 40
Views: 24412

Re: Ability to edit User Manager pages?

I am using UM 3.28, is it possible to change the logo and the colour of the UM page?

Or is this featur only for the new 4... beta?

Thanks
by imaljko4
Fri Aug 28, 2009 5:54 pm
Forum: General
Topic: which voip hardware do i need, for mikrotik rb433?
Replies: 6
Views: 1607

Re: which voip hardware do i need, for mikrotik rb433?

For Skype, you need a PC and an audio device (sound card, handset etc.).
so whats the use of mikrotik router then? if i need a pc handset etc..
I can use skype with a pc and headset etc., without mikrotik router.
by imaljko4
Fri Aug 28, 2009 12:35 am
Forum: General
Topic: which voip hardware do i need, for mikrotik rb433?
Replies: 6
Views: 1607

Re: which voip hardware do i need, for mikrotik rb433?

ok, but how do i attach the phone to routerboard? it doesnt have any port(connector) for phones as far as i know. If i am using skype or voipdiscount, do i also need to run a server? Or does skype and voipdiscount have their own server running? sorry i dont understand this things very well thank you...
by imaljko4
Thu Aug 27, 2009 11:40 pm
Forum: General
Topic: Email server on routerboard? is it possible?
Replies: 1
Views: 1688

Email server on routerboard? is it possible?

Is it possible to install an email server for receiving emails on rb433, because i have a dynamic dns domain and i would like to use it for receiving emails. edit: I want to use my own email server for receiving emails (my own domain). Can i use mikrotik routerbard to run the email server?
by imaljko4
Thu Aug 27, 2009 11:36 pm
Forum: The User Manager
Topic: Can i use UM and Paypal without ssl?
Replies: 4
Views: 1182

Re: Can i use UM and Paypal without ssl?

Finnaly i have managed.
I got a free 30 days trial ssl from rapid ssl.
I imported it and works great.
This is all what i will need for now.
by imaljko4
Thu Aug 27, 2009 11:34 pm
Forum: General
Topic: which voip hardware do i need, for mikrotik rb433?
Replies: 6
Views: 1607

which voip hardware do i need, for mikrotik rb433?

Hello,
I would like to use voip on RB 433, how do i connect a phone to the routerboard?
Which hardware would i need for this?
I am new to this and dont know how this works.

Thank you for your help
by imaljko4
Thu Aug 27, 2009 6:01 pm
Forum: The User Manager
Topic: Can i use UM and Paypal without ssl?
Replies: 4
Views: 1182

Re: Can i use UM and Paypal without ssl?

Thank you, thats what i wanted to know.
by imaljko4
Mon Aug 24, 2009 6:41 pm
Forum: The User Manager
Topic: How to create ssl certificate? (https for payapal)
Replies: 8
Views: 5200

Re: How to create ssl certificate? (https for payapal)

where can i buy a trusted certificate for 20 US?
i was looking and what i found costs 320 EURO per year, but i need to use it only for 2 months during the season.
Please help me with a suggestion for a cheap trusted ssl.

Thanks
by imaljko4
Mon Aug 24, 2009 5:22 pm
Forum: The User Manager
Topic: How to create ssl certificate? (https for payapal)
Replies: 8
Views: 5200

Re: How to create ssl certificate? (https for payapal)

its to explensive for me, i dont earn a lot on the hotspot, and also the hotspot runs only 2 months during the season in summer.
So buying a certificate, would not pay off.
by imaljko4
Mon Aug 24, 2009 5:17 pm
Forum: The User Manager
Topic: Can i use UM and Paypal without ssl?
Replies: 4
Views: 1182

Can i use UM and Paypal without ssl?

Hello, When i create self signed certificate, i dont like the firefox warning when connecting over ssl. Can i also use paypal and UM without ssl? Can users login to the user page in UM without the ssl? How secure is it, and what are the risks if i dont use the ssl conection for UM and paypal? I dont...
by imaljko4
Mon Aug 24, 2009 5:09 pm
Forum: The User Manager
Topic: How to create ssl certificate? (https for payapal)
Replies: 8
Views: 5200

Re: How to create ssl certificate? (https for payapal)

I have managed to create the certificate in linux finaly. But now when i try to connect to usermanager over ssl conection, firefox first always aks me that this is not a secure certificate. Can i use paypall without this secure connection? can also users login tho user page in User manager without s...
by imaljko4
Mon Aug 24, 2009 1:24 pm
Forum: The User Manager
Topic: How to create ssl certificate? (https for payapal)
Replies: 8
Views: 5200

How to create ssl certificate? (https for payapal)

How do i create ssl certificate in windows? I dont know to use Linux, so is it possible to create the certificate in Windows? Can i create the certificate using OPENVPN program, because openvpn can be used on windows, or do i need to use openssl program? If its not possible to create in windows, can...
by imaljko4
Wed Aug 12, 2009 12:06 am
Forum: Wireless Networking
Topic: Re:how to run 2 antennas on one Hotspot?What is nstreamdual?
Replies: 4
Views: 875

Re: Re:how to run 2 antennas on one Hotspot?What is nstreamdual?

ok. Do i need to specify different ssid names for the two wlans?
Do i need to give different frequency's for them as well, or can i use the same frequency on both?
by imaljko4
Tue Aug 11, 2009 5:39 pm
Forum: Wireless Networking
Topic: Re:how to run 2 antennas on one Hotspot?What is nstreamdual?
Replies: 4
Views: 875

Re: Re:how to run 2 antennas on one Hotspot?What is nstreamdual?

Nstreme dual is for point to point link where both ends are mikrotik devices. Why do you need two antennas for your hotspot? Because I am using sector antennas. So one antenna covers one part of the area(to the left), and the other sector antenna the other part(to the right). Please answer my other...
by imaljko4
Mon Aug 10, 2009 7:04 pm
Forum: Wireless Networking
Topic: Re:how to run 2 antennas on one Hotspot?What is nstreamdual?
Replies: 4
Views: 875

Re:how to run 2 antennas on one Hotspot?What is nstreamdual?

Hello, I am using 2 sektor antenna with two wireless cards, on one RB433. How do i make this two wireless antenas to work on the same hotspot? I have done this over the bridge, by bridgin this two antenas into one bridge. My question is what is nstream-dual? Could i also use nstream-dual for this or...
by imaljko4
Thu Aug 06, 2009 4:18 pm
Forum: The User Manager
Topic: Re: after upgrading to UM 4.0beta4 cannot access the UM page
Replies: 2
Views: 801

Re: after upgrading to UM 4.0beta4 cannot access the UM page

I have solved the problem, with the "combined package" the user manager was not installed, so i had to download the "all files" package, and then update the router again. Now the UM is installed and running fine. THanks
by imaljko4
Thu Aug 06, 2009 12:10 pm
Forum: The User Manager
Topic: Fixed User Manager v4.0beta4 package
Replies: 32
Views: 7510

Re: Fixed User Manager v4.0beta4 package

1. v3.27 doesn't support 802.11n cards
2. v3.27 also doesn't support new User Manager :)

so its not possible to use paypal with a R52n card?
by imaljko4
Thu Aug 06, 2009 11:23 am
Forum: The User Manager
Topic: Re: after upgrading to UM 4.0beta4 cannot access the UM page
Replies: 2
Views: 801

Re: after upgrading to UM 4.0beta4 cannot access the UM page

After i upgraded to UM 4.0beta4, cannot access the UM configuration page.

i put the http://192.168.2.2/userman to access the page, but there comes an error:

Error 404: Not Found

The router page on http://192.168.2.2 I am able to access
by imaljko4
Thu Aug 06, 2009 11:09 am
Forum: The User Manager
Topic: Fixed User Manager v4.0beta4 package
Replies: 32
Views: 7510

Re: Fixed User Manager v4.0beta4 package

I am using a R52n wireless card, and i want to use paypal on UM.

In order to do this, can i downgrade routerOS to 3.27?

I mean does routerOS 3.27 suport the R52n card?


Thank you
by imaljko4
Thu Aug 06, 2009 10:53 am
Forum: The User Manager
Topic: Fixed User Manager v4.0beta4 package
Replies: 32
Views: 7510

Re: Fixed User Manager v4.0beta4 package

Does this version of user manager support paypall?

because in the version 4.0 beta3, i wasn't able to find the option to configure paypal.

Thanks
by imaljko4
Thu Aug 06, 2009 12:49 am
Forum: General
Topic: How to downgrade from ROS 4.0 beta3, to a stable version
Replies: 0
Views: 353

How to downgrade from ROS 4.0 beta3, to a stable version

How do i downgrade from ROS 4.0 beta3 to a stable version?

Will i lose my configuration if downgrading?

Will i lose my User Manager configuration and users?

Thank you
by imaljko4
Thu Aug 06, 2009 12:47 am
Forum: The User Manager
Topic: re: UM 4.0 beta3 doenst support paypall?
Replies: 0
Views: 535

re: UM 4.0 beta3 doenst support paypall?

I cannot find where to setup payapll payments on User Manager 4.0. beta3.

If its not possible, how do i downgrade to earlier stable version?
thank you
by imaljko4
Wed Aug 05, 2009 11:58 pm
Forum: The User Manager
Topic: What is a public ID?
Replies: 1
Views: 57664

What is a public ID?

Hello,

What is a public ID?
I mean what should i input in user manager under public ID?


I am trying to setup User Manager sign up for new users.
Under customers page i have to put public ID, but dont know what should i put here?

Thanks
by imaljko4
Wed Aug 05, 2009 6:03 pm
Forum: The User Manager
Topic: Paypal takes the money but the account does not activate
Replies: 16
Views: 8498

Re: Paypal takes the money but the account does not activate

Hello. Can someone help me start up the Hotspot with paypal charge ? http://wiki.mikrotik.com/wiki/User_Manager/Hotspot_Example http://wiki.mikrotik.com/wiki/User_Manager/User_payments#PayPal If you have a specific question, ask! Ok here i can find how to setup paypal payments, But how do I setup t...
by imaljko4
Wed Aug 05, 2009 4:32 pm
Forum: The User Manager
Topic: Re: Paypall and hotspot
Replies: 0
Views: 565

Re: Paypall and hotspot

How can i configure that the customers can buy an account for hotspot, using paypal?

I mean how do i configure the login page for that?
by imaljko4
Sat Jul 04, 2009 12:51 pm
Forum: General
Topic: Route Acess point users to Mikrotik router with hotspot?
Replies: 4
Views: 1043

Re: Route Acess point users to Mikrotik router with hotspot?

so how do i do this?
do i need to setup a bridge?, because the two accespoints are connected via Ethernet.

And if yes how do i setup the bridge?
Please help


Thanks
by imaljko4
Fri Jul 03, 2009 11:53 pm
Forum: General
Topic: Route Acess point users to Mikrotik router with hotspot?
Replies: 4
Views: 1043

Re: Route Acess point users to Mikrotik router with hotspot?

The device with red is both DSL modem and router.
So the both access points are already connected via this Modem/router.

Or do i need to make one additional connection between them?
by imaljko4
Fri Jul 03, 2009 11:12 pm
Forum: General
Topic: Route Acess point users to Mikrotik router with hotspot?
Replies: 4
Views: 1043

Route Acess point users to Mikrotik router with hotspot?

Hello I have one simple Dlink acces point, and one Mikrotik router Access point with hotspot on it. They are both connected to my main router (which provides internet connection), via Ethernet cables. Please look at the picture below. I want that the users which are connecting to D-link access point...
by imaljko4
Fri Jul 03, 2009 12:16 pm
Forum: The User Manager
Topic: User manager 4.3 beta, How to store the login password?
Replies: 1
Views: 850

User manager 4.3 beta, How to store the login password?

Is it possible to store the login password for accessing UM 4.3 in firefox so that i don't have to put it again every time i connect to it from my computer? In the last versions this was possible, but with the new version it seems its protected from being able to store the password in firefox. Thanks
by imaljko4
Fri Jul 03, 2009 11:57 am
Forum: The User Manager
Topic: Enable mulitple sessions for one username?
Replies: 4
Views: 992

Re: Enable mulitple sessions for one username?

Have you specified same in the hotspot user profile/ppoe profile? i.e shared users.
Yes, this has solved the problem.
Thank you
by imaljko4
Thu Jul 02, 2009 8:25 pm
Forum: The User Manager
Topic: Enable mulitple sessions for one username?
Replies: 4
Views: 992

Re: Enable mulitple sessions for one username?

i have done as you said, but still when the second user tries to connect, a message comes up:

"No more session allowed for this user"
by imaljko4
Thu Jul 02, 2009 3:13 pm
Forum: The User Manager
Topic: Enable mulitple sessions for one username?
Replies: 4
Views: 992

Enable mulitple sessions for one username?

Can i have 1 user in Usermanager and enable multiple sessions for this user.
So that for example 3 customers can connect simultaneously using the same username and password?

Thank you
by imaljko4
Thu Jul 02, 2009 2:49 pm
Forum: The User Manager
Topic: how to print vouchers on Usermanger 4.3 beta?
Replies: 2
Views: 788

Re: how to print vouchers on Usermanger 4.3 beta?

sorry,
I have found out, firs i need to select which users i want to print,
and then i choose generate Vouchers.
by imaljko4
Thu Jul 02, 2009 2:43 pm
Forum: The User Manager
Topic: how to print vouchers on Usermanger 4.3 beta?
Replies: 2
Views: 788

how to print vouchers on Usermanger 4.3 beta?

Hello,
I cannot find the option to preview or to print vouchers on usermanager 4.3 beta.
I am able to create multiple users, but how to print them on printer?

thanks
by imaljko4
Thu Jul 02, 2009 2:36 pm
Forum: The User Manager
Topic: Usermanager 3.23 Problem with correct time in the logs
Replies: 4
Views: 2422

Re: Usermanager 3.23 Problem with correct time in the logs

Sorry,
I have found it out.
I do it directly in the user manager console under customers.

Thanks anyways
by imaljko4
Thu Jul 02, 2009 2:31 pm
Forum: The User Manager
Topic: Usermanager 3.23 Problem with correct time in the logs
Replies: 4
Views: 2422

Re: Usermanager 3.23 Problem with correct time in the logs

Hello,
And how exactly to do this?
which parameters i have to put in to set my Usermanager time?

Or can you provide me with a link to the documenation for setting up time to usermanager?

thank you
by imaljko4
Thu Jul 02, 2009 2:19 pm
Forum: General
Topic: Walled garden and Google maps not working
Replies: 5
Views: 2144

Re: Walled garden and Google maps not working

Hi, but if I allow maps.google.com, then they will be able to use all google maps, incuding their own searches. Is it not posible to allow just to show my specific google map?

Thank you
by imaljko4
Thu Jul 02, 2009 11:40 am
Forum: General
Topic: Walled garden and Google maps not working
Replies: 5
Views: 2144

Walled garden and Google maps not working

Hello, I want to setup walled garden to my web page for my hotspot. Everything works fine, but i have a google map on the page, showing our location, and this google map doesn't load. As tough something is protecting it from loading. How do i setup the Walled garden to enable this google map (which ...
by imaljko4
Thu Aug 21, 2008 2:01 pm
Forum: The User Manager
Topic: Adjust minimum session time
Replies: 9
Views: 2932

Re: Adjust minimum session time

I thought that it is possible, that if he for example a customer disconnects after 2 min, the router still counts his session time until 10 min., and then stops. If this is not possible, is it possible to limit the users by specifying a maximum number of sessions that will be allowed? I want to do t...
by imaljko4
Thu Aug 21, 2008 1:49 pm
Forum: The User Manager
Topic: Adjust minimum session time
Replies: 9
Views: 2932

Adjust minimum session time

Hello, Is it possible to adjust a minimum session time for users. For example, if i sell 5 hours of internet time to some user, he can spend it in 1 month, i want to make a minimum time per session, so always when he connects he would need to be on for at least 10 minutes. Because some users buy thi...
by imaljko4
Wed Jul 02, 2008 11:22 am
Forum: General
Topic: Re: Rate limiting explanation
Replies: 3
Views: 941

Re: Rate limiting explanation

I have setup a hotspot and am using User Manager to configure the wireless hotspot clients. In user manager i go to the option where i can limit the rate, but there are several options to choose: Rate limit: RX TX Burst rate: RX TX Burst threshold: RX TX Burst time: RX TX I understand that RX is the...
by imaljko4
Wed Jul 02, 2008 12:16 am
Forum: General
Topic: Re: Rate limiting explanation
Replies: 3
Views: 941

Re: Rate limiting explanation

Hi, I read the mikrotik documentation for rate limiting, but i totally dont understand it. Can somebody please explain me in an exaple. I would like to limit the real download speed of some client. Under real download speed, i mean the speed that is really shown while downloading some program or apl...
by imaljko4
Sat Jun 28, 2008 7:28 pm
Forum: General
Topic: Somebody trying to hack into my hotspot
Replies: 0
Views: 589

Somebody trying to hack into my hotspot

Is there a way how i can automatically disable the access for specific mac addresses if they are trying to log on to the hotpot with wrong username and passsword for to many times in a row? Because in my log screen i see many tryings to access the hotspot with wrong usernames, )somebody is trying to...
by imaljko4
Sat Jun 28, 2008 1:41 pm
Forum: Beginner Basics
Topic: Ftp server on mikrotik step by step guide
Replies: 4
Views: 22493

Re: Ftp server on mikrotik step by step guide

Thanks that worked!! :D
by imaljko4
Sat Jun 28, 2008 1:40 pm
Forum: General
Topic: how to make a link on login page?
Replies: 2
Views: 693

Re: how to make a link on login page?

You need to Edit login.html Page The code is <a href="hotspot\Img\Location.png">your link here</a> I have done as you said, but when i click on that link ("see location") it says something like: error 404 Do i have to add this hotspot\Img\location.png to walled garden? Edit: Finally it works now, i...
by imaljko4
Sat Jun 28, 2008 1:20 pm
Forum: Beginner Basics
Topic: Ftp server on mikrotik step by step guide
Replies: 4
Views: 22493

Re: Ftp server on mikrotik step by step guide

By default the FTP service is unable on Router.
Pl check /ip services

ftp://Router IP address
Ok i have entered now the ftp server over Mozilla explorer(browser), but how can i now copy, delete or move files in the ftp server?

Thanks
by imaljko4
Fri Jun 27, 2008 11:04 pm
Forum: General
Topic: how to make a link on login page?
Replies: 2
Views: 693

how to make a link on login page?

I want to make a link on the login page, which will lead to the Location map. I have uploaded the location image(map) to the mikrotik router: hotspot\Img\Location.png How do i make a link on the login page to that image? so that clicking on that link opens that image? i need exact code which i need ...
by imaljko4
Fri Jun 27, 2008 10:59 pm
Forum: Beginner Basics
Topic: Ftp server on mikrotik step by step guide
Replies: 4
Views: 22493

Ftp server on mikrotik step by step guide

Where to find a step by step guide, how to setup ftp server with mikrotik. I never used a ftp server so doesnt know how it works. When accesing ROuterboard files over winbox it dosnt work corectly, often the files are copide to some directories i didnt copy them to, and then i have to search for the...
by imaljko4
Fri Jun 20, 2008 3:56 pm
Forum: The User Manager
Topic: User manager access over ehternet not possible
Replies: 3
Views: 1653

Re: User manager access over ehternet not possible

I still have the same problem, I can only acces the user manager, by connecting to the routerboard over WLAN. I am not able to access the User manager via the ethernet connetion. Anybody knows a solution? Just to remind: User manager and hotspot are setup on the wlan interface. But I am connecting t...
by imaljko4
Sun Apr 27, 2008 12:00 am
Forum: Wireless Networking
Topic: Viratual AP manual
Replies: 11
Views: 3951

Re: Viratual AP manual

----
Hai fren,
better when you will keep your resources as cpe.

regrads
Hasbullah.com
What is CPE?
by imaljko4
Sat Apr 26, 2008 11:42 pm
Forum: Wireless Networking
Topic: Viratual AP manual
Replies: 11
Views: 3951

Re: Viratual AP manual

Hi What i wanted to do is: I have a routerboard 133 with ethernet 1 ethernet 2 ehternet 3 wlan1 I want to make a hotspot over the wlan1, (virtual Wlan2) and also connect the routerboard over wlan1 to DSL (to a wireless DSL router), The aim of this is that i don't have to use an Ethernet cable. As fa...
by imaljko4
Sat Apr 26, 2008 11:11 pm
Forum: Wireless Networking
Topic: Viratual AP manual
Replies: 11
Views: 3951

Re: Viratual AP manual

Greetings! There is not a lot to it. Did you set the master-interface=wlan1 (or whatever interface)? Did you enable the VAP interface? Did you put a DHCP server on it? The wiki is a little shy on some procedure examples. Thank you for your answer yes i did that, but still not working. I also tried ...
by imaljko4
Sat Apr 26, 2008 3:21 pm
Forum: Wireless Networking
Topic: Viratual AP manual
Replies: 11
Views: 3951

Viratual AP manual

Where can i find a simple example for creatinga a virtual AP? i want my wlan1 to be in station mode and then create a virtual acces point for the hotspot. I created one virtual AP, but when i scan with my laptop for networks it doesnt find it. Edit: when i put the wlan1 in station mode then the virt...
by imaljko4
Sat Apr 26, 2008 2:03 pm
Forum: The User Manager
Topic: User manager access over ehternet not possible
Replies: 3
Views: 1653

User manager access over ehternet not possible

Is it possible to acces the user manager over ehternet? I have set up hotspot and user manager on the same routerboard 133. Everything is working fine. ethernet ip adress 192.168.1.2 wlan1 ip address 10.0.0.1. User manager is set up for the wlan1 ip adress (hotspot). I can acces the user manager ove...
by imaljko4
Sat Apr 26, 2008 12:00 am
Forum: The User Manager
Topic: User Manager + Hotspot: Error 404: Not Found
Replies: 16
Views: 35788

Re: User Manager + Hotspot: Error 404: Not Found

Hi tahnks alot, it solved my problem the port 808! Great, thanks!
by imaljko4
Fri Apr 25, 2008 11:15 pm
Forum: General
Topic: Using Hotspot & UM from same PC
Replies: 3
Views: 1494

Re: Using Hotspot & UM from same PC

Hi Ashish I have exactly the same problem, I am using routerboard 133, 4 licenses, and have configured the hotspot and User Manager on the same router. ehternet1 ip 192.168.1.2 wlan ip 10.0.0.1 Everything works fine, i can generate accounts, and log in to hotspot and use the internet. But when hotsp...
by imaljko4
Fri Apr 25, 2008 7:01 pm
Forum: The User Manager
Topic: User manager access problem
Replies: 0
Views: 1000

User manager access problem

Hi I configured the User Manager and hotspot on the same routerboard 133. I need to be able to acces the User Manager via wireless. But as soon as I enable the hotspot, I am not anymore able to connect to the User Manager console. Only when i disable hotspot, then i can log on again to the User Mana...