MikroTik

hajde

Yes it dosnt work.

I just wrote to support.

hajde

Must have, without it, it is useless, for example, over 100 users with addresses, telefon, email..... where to write it on V7 UM? PPP have possibilitie to make own user, Hotspot also, CapsMan have access list, and all that through winbox/webfig, only UM was, with more possibilities. Maybe on externa...

hajde

nRAY 60G link P2P after update on 7.1.3 wireless dosnt connect. Scan dosnt see anything. Downgrade to 6.49.3 everything ok. RSSI -55, Distance 1km.

hajde

Still doesn't work.

hajde

Yes for mee too. From different routers, different ISPs, different IPs..... hundreds of vpns on dinamic IP is papaaaaa.....

I wrote to support, last night, till yet no answer.

hajde

Thank you.

hajde

Yes for mee too. From different routers, different ISPs, different IPs..... hundreds of vpns on dinamic IP is papaaaaa.....

I wrote to support, last night, till yet no answer.

hajde

Run on 6.47.8.

hajde

PL7411-2nD after upgrade, dosnt connect over PCL. 5 devices same situation. Downgrade to 6.47.8 solve problem.

hajde

Maybe, DNS attack, torch, port 53 udp.

hajde

Thank you jarda, normis. With new install I done that.

hajde

How than to reset routerOS , I forget password. V4.17

hajde

How to enter routerboot on esxi?

hajde

Hi,

one of my project was 16x CRS226-24G-2S+ IN (on that time was not yet available RM version, so we improvised

) on one place, all connected with SFP+ (10Gbit), 300m, Multi Mode trancivers. Ring network, all port in bridge, rstp with priority.

All working very well more than 9 months.

hajde

I see on changelog for version 6.20rc16 that you add: *) ipsec - support fqdn as my id;

Can we have it also for EOIP?

hajde

It seems that this version is very stable for x86-based routers. With the upgrades to the new version, the only problem occurred with the static queues, where instead of target address entered 0.0.0.0/0, and I had to use a mac-telnet to added the correct address. Already four days working with a muc...

hajde

PPPoE option 82
With this featue you may understand that a pppoe user connected from where (eg. which port of switch , dslam )

Yes, +1.

hajde

I'm having hard time using ROS5.9. I've upgraded from 4.10 and 4.17 (4x worked fine). After upgrade I got random reboots of both my core routers, both are x86 multicpu (xeon), one is 1xquadcore system http://h18000.www1.hp.com/products/quickspecs/12867_na/12867_na.HTML and second is 2x quad core xe...

hajde

My x86 is http://www.mikrotikrouter.com/732.asp [/quote] I know that this is not the final solution that I shall offer, but may reduce pain and problems with clients until the final solution from Mikrotik. This is software problem becouse I also have 3 MT on x86 with same simptoms. Problem is with ...

hajde

You are not reading well my friend.. As you can see the issue exists on SXT and Groove's as well. Apart from that they are not even one year in production there is no way to repair or replace parts on these boards without distroying them...... Hence your soluction is nice but not workable. Secondly...

hajde

any symptom or measurement for us to make sure that's the capacitor issue?
appreciate it..

thanks.[/quote]

I think that you have not problem with capacitors. Try v.4.17 and you will have bether dreams.

hajde

Same problem with x86. After upgrade on 5.9 its locked after reboot everything ok.
with 5.9 my x86 reboot evry 5-6 min
And still my rb1200 reboot 4-5 times a day

Your x86 is Multi core (core2duo or similar procesor)?

hajde

[/quote] we have tried using the DC jack instead of POE. the problem still remain, btw, which capacitor you talking about. can post the picture here and we may can have a try on it. if it work, then why not mikrotik change the item when it on the production? sound non sense.[/quote] I think that we ...

hajde

I think that your problem is hardware related. Try to replace the capacitors, on some RB-s help that. On this problem, I am sure replace capacitors will help: "In all these cases the issue almost completely disappeared by feeding the board by jack and at the same time not using the POE ports a...

hajde

Same problem with x86. After upgrade on 5.9 its locked after reboot everything ok.

hajde

I think that your problem is hardware related. Try to replace the capacitors, on some RB-s help that. On this problem, I am sure replace capacitors will help: "In all these cases the issue almost completely disappeared by feeding the board by jack and at the same time not using the POE ports an...

hajde

Latvia->Bosnia

hajde

Yes it is Intel but have not HT.
It is about 3 HP server:
1. ML110 G5 2. ML110 G6 and 3. DL380-G7

1.Xeon X3065 2.Xeon X3430 3. Xeon E5606

TY.

hajde

From version 5.x we have problem with our core router. We have it on 3 diferent server, but same problem. With multicore enabled, server reboot on unequable time. With multicore disabled everything is ok, but cpu is than on: 100% all time. On version 4 we have no problem with this just on version 4....

hajde

Same problem hire but with x86, I try to change hardware (3x HP server: 1. ML110 G5 2. ML110 G6 and 3. DL380-G7) and problem still persist?

Contact support with suppout file long time ago, but he seed everything is ok?

Edit: On all ROS version I try, same problem.

hajde

I also have same problem, without downgrade on 4.16 I can not solve it.

hajde

Thank you very much for a good idea, and also for example.

hajde

Before min or two i have finish with l7 qos. On the tree I belive is bether to have limit at. and max limit in % insted in kbps. For exapmle write now I have 50mbps/50mbps but in future I will have more. than I must change all speeds on every QueueTree.

hajde

I know what you mean. Thats work if is just 2lan behinde load balancing, but I have 2 LINKs, for ex. after 192.168.2.1/30 in next MT I have 192.168.4.1/24, and also after 192.168.3.1/30 in next MT I have 192.168.5.1/24. So first adresses wich is load balanced is just 2adresses, and for 1day can make...

hajde

What heapands if we have 2ISP to 2wlan LINKs with other MT and other subnets? I have proved last post Load Balancing but thats dont work for me. becourse: 1.isp=odd 2.isp=even on two links links with wireless wlan1=192.168.2.1/30 wlan2=192.168.3.1/30 whan wlan1 make connection on odd and wlan2 on ev...

Search found 35 matches

Re: Is there a problem with IP Cloud? [SOLVED]

Re: Feature Request: Admin Web Interface for the User Manager

Re: v7.1.3 is released!

Re: Is there a problem with IP Cloud? [SOLVED]

Re: Is there a problem with IP Cloud? [SOLVED]

Re: ip cloud DDNS does not work

Re: ip cloud DDNS does not work

Re: v6.48 [stable] is released!

Re: v6.48 [stable] is released!

Re: CHR bandwidth consumption

Re: Routerboot esxi

Re: Routerboot esxi

Routerboot esxi

Re: Buying advice: CRS226-24G-2S+RM or HP V1910-24G

Re: 6.20 release candidate special version

Re: v6.0beta2 released!

Re: ROS v6 Suggestions

Re: RouterOS v5.9 released

Re: RouterOS v5.9 released

Re: RouterOS v5.9 released

Re: RouterOS v5.9 released

Re: RouterOS v5.9 released

Re: RouterOS v5.9 released

Re: RouterOS v5.9 released

Re: RouterOS v5.9 released

Re: RouterOS v5.9 released

Re: RouterOS v5.9 released

Re: x86 CoreRouter problem with v5.X

x86 CoreRouter problem with v5.X

Re: RB1000 closing tens of pppoe connections at once

Re: RouterOS v5rc9

Re: QueueTree in %

QueueTree in %

Re: 2 ISP in 1 Lan

Re: 2 ISP in 1 Lan