Community discussions

Search found 77 matches

by jcrites2008
Thu Aug 11, 2011 12:31 am
Forum: RouterBOARD hardware
Topic: RB600 dead from lightning
Replies: 1
Views: 525

RB600 dead from lightning

We had a bad storm here over the weekend that took out one of our RB600A's. We can't see any damage to it, but it won't come on at all even with a power supply plugged in directly. Is there a certain diode or anything that could be replaced that might fix it? Thanks ahead of time.
by jcrites2008
Sat Jul 30, 2011 12:22 am
Forum: RouterBOARD hardware
Topic: RB751
Replies: 73
Views: 20898

Re: RB751

It's on roc-noc.com now. Not in stock yet, but it has a price of $89.99 for the non-gigabit one. Yikes! That seems a little high to me, but it is a higher power router I guess. I was hoping the gigabit one would be around that price though. Edit: It says on the product page that the pricing is just ...
by jcrites2008
Fri Jul 22, 2011 6:25 pm
Forum: RouterBOARD hardware
Topic: Availability of the RB751G
Replies: 101
Views: 20996

Re: Availability of the RB751G

Tom, do you know anything about the availability for the RB2011? Thanks.
by jcrites2008
Thu Jul 14, 2011 6:27 pm
Forum: RouterBOARD hardware
Topic: RB750G vs RB750GL, why is the cpu clocked down?
Replies: 13
Views: 10979

Re: RB750G vs RB750GL, why is the cpu clocked down?

Unfortunately, on streakwave the price difference for us between the 750g and 750gl is only $5. Not hardly worth the reduced speed imo.
by jcrites2008
Thu Jul 14, 2011 6:25 pm
Forum: RouterBOARD hardware
Topic: Question about RB1200
Replies: 3
Views: 889

Re: Question about RB1200

Well you can't exactly bond them together. Meaning that if you do a speedtest you won't get 50mbps, you only get 6. You can do load balancing though so that all of the links get used equally and you can have a total throughput of 50mbps. So as long as you're not going to offer anything higher than 6...
by jcrites2008
Wed Jul 06, 2011 6:54 pm
Forum: RouterBOARD hardware
Topic: RB1200 Downgrade to 4.17 issue
Replies: 8
Views: 2978

Re: RB1200 Downgrade to 4.17 issue

I made the mistake of downgrading to version 4 as well. Then had to use netinstall to get v5 back on there!
by jcrites2008
Wed Jul 06, 2011 1:23 am
Forum: RouterBOARD hardware
Topic: RB1100AH power cycle required on upgrade
Replies: 7
Views: 2759

Re: RB1100AH power cycle required on upgrade

This happened to me a couple times on 2 rb1200's. I think it happened when I upgraded both of them. One time it happened when i reset the config with the no-defaults option too.
by jcrites2008
Tue May 31, 2011 10:42 pm
Forum: RouterBOARD hardware
Topic: New RB450 class
Replies: 2
Views: 726

Re: New RB450 class

RB1100 x2 is coming out this year. Mikrotik announced it at MUM
by jcrites2008
Wed May 25, 2011 1:41 am
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28716

Re: New Products

Hi, i just found a new Mikrotik product. Its the RG/750GL Here is the link: http://shop.meconet.de/artikeldet.php?proid=16883&sid=tvqccfj2maphjc3ntub3mefaa1 Is this a replacement for the RB750G? How is the performance? IT has double RAM but only 400MHz CPU for the same price. I found this on streak...
by jcrites2008
Tue Apr 12, 2011 7:28 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28716

Re: New Products

http://roc-noc.com has had RB1100AH's for quite awhile now. At least that's what it says on their website.
by jcrites2008
Tue Mar 29, 2011 6:49 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28716

Re: New Products

Normis,

Do you know what the operating temperature is on the rb750up?

Thanks.
by jcrites2008
Mon Mar 28, 2011 6:19 pm
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 26675

Re: RB750UP questions/suggestions

Also, hopefully in the future Mikrotik will come out with one that has 10+ ports.
by jcrites2008
Wed Mar 16, 2011 7:54 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28716

Re: New Products

you can use PEXT or POE to power the POE out router. It is similar to 802.3af except, auto feature will start work with less resistance than set 19KOHM set in standard and it will power 9 to 28V devices. Limitation is that you have 600mA on port, so if you use 28V PSU you will get 16W on the board,...
by jcrites2008
Thu Mar 10, 2011 7:24 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28716

Re: New Products

Sheesh, mikrotik releases all these cool new products and people just complain about them. Sorry, they can't make everything have gigabit and quad-core processors for $100. I for one am glad to see a dual-core processor and tons of options now for routerboards that have more than 5 ports. 2 years ag...
by jcrites2008
Fri Mar 04, 2011 6:29 pm
Forum: Scripting
Topic: Trying to put a new line in an email, not working
Replies: 2
Views: 819

Re: Trying to put a new line in an email, not working

Thanks, I tried \r and \n separately, but not together!
by jcrites2008
Thu Mar 03, 2011 7:57 pm
Forum: Scripting
Topic: Trying to put a new line in an email, not working
Replies: 2
Views: 819

Trying to put a new line in an email, not working

I'm trying to send an email that has a body with a "\n" in it, but every time it tries to send it it gives me the error "Error sending email: Invalidy BODY". I saw another thread where someone said they were putting \n in their email and it worked fine. Any ideas on why it will not work for me? As s...
by jcrites2008
Thu Feb 17, 2011 6:57 pm
Forum: RouterBOARD hardware
Topic: RB1100AH - new product
Replies: 101
Views: 29016

Re: RB1100AH - new product

So does the RB1100 have 2 RAM slots then? To my knowledge, there are no 1.5 GB sticks.
by jcrites2008
Wed Feb 16, 2011 6:26 pm
Forum: RouterBOARD hardware
Topic: RB1100AH - new product
Replies: 101
Views: 29016

Re: RB1100AH - new product

Sweet!! Any idea on when it will be available?
by jcrites2008
Wed Feb 09, 2011 6:28 pm
Forum: RouterBOARD hardware
Topic: POE incident customer burns laptop SMOKE!
Replies: 11
Views: 3453

Re: POE incident customer burns laptop SMOKE!

Strange, I have plugged in POE to laptops and routers on accident with voltage as high as 48v and never had one single issue.
by jcrites2008
Fri Jan 28, 2011 11:27 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD SXT 5HnD
Replies: 191
Views: 59762

Re: RouterBOARD SXT 5HnD

it works; thats why ubnt released one for NanostationM They didn't actually. Some people use 3rd party dishes with nanostations, but UBNT doesn't recommend it. They are making a similar device for 900MHz and 3GHz equipment, but they are changing the design the internal antenna of the nanostations t...
by jcrites2008
Tue Jan 25, 2011 6:22 pm
Forum: RouterBOARD hardware
Topic: No beeper on some Routerboards
Replies: 5
Views: 990

Re: No beeper on some Routerboards

You seriously trashed them?! I would have gladly taken them off your hands.
by jcrites2008
Wed Jan 19, 2011 6:52 pm
Forum: RouterBOARD hardware
Topic: RB733 in the Making?
Replies: 5
Views: 1459

Re: RB733 in the Making?

You already have RB433 and RB493G, what's wrong with them?
Nothing is wrong with them, it's just not necessary to have that many ports for an AP. A RB433G would cost less. RB493G would work for now if you really needed it gigabit though.
by jcrites2008
Fri Jan 07, 2011 7:06 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD SXT 5HnD
Replies: 191
Views: 59762

Re: RouterBOARD SXT 5HnD

Where's the love for 2GHz? :( Last two products to be released are 5GHz only, I am trying to patiently wait for MUM.
by jcrites2008
Tue Nov 30, 2010 7:02 pm
Forum: General
Topic: Is the RB411G coming out soon?
Replies: 16
Views: 3063

Re: Is the RB411G coming out soon?

Can you post this script pretty please? :)
by jcrites2008
Thu Nov 11, 2010 6:19 pm
Forum: RouterBOARD hardware
Topic: RB433 Gigabit
Replies: 10
Views: 2921

Re: RB433 Gigabit

I figured all routerboards would have gigabit at some point.
by jcrites2008
Tue Nov 02, 2010 6:07 pm
Forum: RouterBOARD hardware
Topic: NEW RB711
Replies: 110
Views: 28775

Re: NEW RB711

Thanks
by jcrites2008
Mon Nov 01, 2010 6:27 pm
Forum: RouterBOARD hardware
Topic: NEW RB711
Replies: 110
Views: 28775

Re: NEW RB711

Normis,

Can you confirm whether or not there will be a 2GHz version of the 711? That would be very helpful to us as we are getting ready to put up a new site with R52Hn's and are going to be running on 2GHz.
by jcrites2008
Fri Sep 03, 2010 1:12 am
Forum: RouterBOARD hardware
Topic: USB modem sony ericsson md300 not recognized in 411uahr
Replies: 4
Views: 982

Re: USB modem sony ericsson md300 not recognized in 411uahr

Any device plugged in 411uahr USB port is not powered via USB port - external power adapter is required.
how are you supposed to power a usb stick?
by jcrites2008
Fri Jul 30, 2010 12:47 am
Forum: RouterBOARD hardware
Topic: Need a RB433UAH+Gbit or a RB750G with 2+ PCI
Replies: 3
Views: 699

Re: Need a RB433UAH+Gbit or a RB750G with 2+ PCI

But there are more coming, right Normis?? :)
by jcrites2008
Tue Jul 27, 2010 7:37 pm
Forum: RouterBOARD hardware
Topic: NEW RB711
Replies: 110
Views: 28775

Re: NEW RB711

That's old and EOL. It's also not wireless N. I'm surprised they have any of those left!
by jcrites2008
Tue Jul 27, 2010 7:12 pm
Forum: RouterBOARD hardware
Topic: NEW RB711
Replies: 110
Views: 28775

Re: NEW RB711

I hope there is a 2 ghz version of this coming!
by jcrites2008
Tue Jul 06, 2010 7:33 pm
Forum: RouterBOARD hardware
Topic: rb411ar-m
Replies: 6
Views: 1011

Re: rb411ar-m

new RB750 have a hole for one USB port. On the PCB i don't see anything for wireless... I would absolutely love a RB450G with usb, but I would probably take a 750G with usb if they don't make the 450 one. Oh wait, you can't use USB for a ftp server on Mikrotik, so nevermind. I guess I really just w...
by jcrites2008
Mon May 10, 2010 5:56 pm
Forum: RouterBOARD hardware
Topic: Installing applications on RouterBOARD
Replies: 7
Views: 1096

Re: Installing applications on RouterBOARD

Thanks for your answer!
by jcrites2008
Fri May 07, 2010 8:47 pm
Forum: RouterBOARD hardware
Topic: Installing applications on RouterBOARD
Replies: 7
Views: 1096

Re: Installing applications on RouterBOARD

This is what people tell me every time I bring this up, but I know routerboards could have great filesharing if Mikrotik would just let them. Lots of consumer routers have USB ports for filesharing and I don't want to spend a ton of extra money for a computer or a NAS when it would work perfectly fi...
by jcrites2008
Fri May 07, 2010 7:15 pm
Forum: RouterBOARD hardware
Topic: Installing applications on RouterBOARD
Replies: 7
Views: 1096

Re: Installing applications on RouterBOARD

I wonder if you would have access to the usb port that's built into some routerboards. I would like to do filesharing from a routerboard.
by jcrites2008
Thu Apr 22, 2010 12:47 am
Forum: RouterBOARD hardware
Topic: RB600 missing from Routerboard.com
Replies: 19
Views: 5199

Re: RB600 missing from Routerboard.com

Is there any chance the price will go down on the RB800 now that the RB600 is pretty much out of stock everywhere?
by jcrites2008
Sat Apr 17, 2010 1:00 am
Forum: RouterBOARD hardware
Topic: R5nH?
Replies: 7
Views: 1743

Re: R5nH?

That is why we are not selling it. Sensitivity is very weak according to the data sheet.

Tom
Funny how i found it on your website lol
by jcrites2008
Wed Apr 14, 2010 6:19 pm
Forum: RouterBOARD hardware
Topic: Which RouterBOARD would I need?
Replies: 6
Views: 1044

Re: Which RouterBOARD would I need?

Yeah, I may do a RB750G or 450G and a consumer wireless router.
by jcrites2008
Tue Apr 13, 2010 9:44 pm
Forum: RouterBOARD hardware
Topic: New RB816 !
Replies: 20
Views: 6443

Re: New RB816 !

Do all of the ports on this show up as configurable interfaces on routerOS or is it just basically a switch?

Thanks,

Jason
by jcrites2008
Tue Apr 13, 2010 8:40 pm
Forum: RouterBOARD hardware
Topic: RB750G revealed!
Replies: 37
Views: 22005

Re: RB750G revealed!

I won't have Internet anywhere near that fast. I will mainly be transferring files and streaming hi-def movies. I plan on using Cat6 cable.
by jcrites2008
Tue Apr 13, 2010 8:20 pm
Forum: RouterBOARD hardware
Topic: Which RouterBOARD would I need?
Replies: 6
Views: 1044

Re: Which RouterBOARD would I need?

Even RB750G would handle all of the mentioned quite easily. It's CPU is no worse than RB450G. If you need miniPCI, then maybe you can still find the cheaper RB600. We are also working on other gigabit products, but nothing to announce yet. RB493G??? That would make my day. Gigabit ports plus wirele...
by jcrites2008
Tue Apr 13, 2010 8:09 pm
Forum: RouterBOARD hardware
Topic: RB750G revealed!
Replies: 37
Views: 22005

Re: RB750G revealed!

Wow!! Thanks a million for the awesome explanation. That is one of the most helpful posts I have ever received. Now, question is, why did they do this? How much could it have saved them to not run a connection from one of the rgmii interfaces to ether1? Or perhaps this is more of a marketing strateg...
by jcrites2008
Tue Apr 13, 2010 12:20 am
Forum: RouterBOARD hardware
Topic: RB600 missing from Routerboard.com
Replies: 19
Views: 5199

Re: RB600 missing from Routerboard.com

Only problem is, RB800 costs almost $350. Whereas the rb600 can be had for less than $200.
by jcrites2008
Mon Apr 12, 2010 10:35 pm
Forum: RouterBOARD hardware
Topic: RB600 missing from Routerboard.com
Replies: 19
Views: 5199

Re: RB600 missing from Routerboard.com

I'm not exactly sure how the RB800 can be a replacement for the RB600 when it costs twice as much!! Those things had better come down in price big time if RB600's really do go EOL. You have any info on this Normis?

Thanks,

Jason
by jcrites2008
Mon Apr 12, 2010 10:31 pm
Forum: RouterBOARD hardware
Topic: RB750G revealed!
Replies: 37
Views: 22005

Re: RB750G revealed!

I'm not quite sure what this discussion is about. Can someone explain it to me in simple terms?

Thank you,

Jason
by jcrites2008
Tue Mar 30, 2010 12:24 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 287339

Re: 802.11n

Real 100mbit half duplex is arrived! This is real customer traffic not any type of b-test. I try replace RB600 at station side and I am sure i can get more then 100mbit in one direction! Concratulations! But; - Configs please (´n´ specific as well as other wireless. nstreme? WDS? MPLS?) - Link data...
by jcrites2008
Fri Mar 19, 2010 6:48 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 287339

Re: 802.11n

You would think that even with default settings, you could get decent throughput, but I haven't been able to get decent throughput no matter what I try. I tried other people's configs, tried experimenting with my own, took advice from other people,still nothing. It's just not worth headache really.....
by jcrites2008
Fri Mar 05, 2010 10:13 pm
Forum: RouterBOARD hardware
Topic: RB1100
Replies: 185
Views: 64360

Re: RB1100

Hmmm, I don't think so. Both have the same CPU core and are the same generation. The RB1000 has 2 times the L2 cache. The RB1000 CPU is running 33% faster. Tom Hmm ok you have a point with the L2 cache but Normis did say it will be able to run at the same speed as the RB1000. I assume that's becaus...
by jcrites2008
Thu Mar 04, 2010 8:12 pm
Forum: RouterBOARD hardware
Topic: RB1100
Replies: 185
Views: 64360

Re: RB1100

Normis says that performance is about the same, plus RB1100 has twice as many ports, plus it is most likely going to be significantly cheaper. But if you'd rather pay a few hundred dollars more for the RB1000, go ahead I guess. Also I would imagine the processor in the RB1100 is newer than the one i...
by jcrites2008
Wed Mar 03, 2010 9:56 pm
Forum: General
Topic: MUM Poland 2010 thread
Replies: 113
Views: 24409

Re: MUM Poland 2010 thread

I think "those times" are when this switch costs 2x less (or even less that) of RB750G ;)
Normis,

Well that's certainly good news, can you tell us whether or not this is meant to work outdoors or perhaps the operating temperatures?

Thank you!

Jason
by jcrites2008
Wed Mar 03, 2010 8:27 pm
Forum: General
Topic: MUM Poland 2010 thread
Replies: 113
Views: 24409

Re: MUM Poland 2010 thread

I would assume that a 750G could do everything that RB250GS can do plus more. A 750G is $70 so is it safe to assume this switch might be down around $50 or so? Personally I would still rather shell out a little more to get the 750G. Also, it would be nice if they had a non-gigabit switch for say $25...
by jcrites2008
Wed Mar 03, 2010 7:59 pm
Forum: General
Topic: MUM Poland 2010 thread
Replies: 113
Views: 24409

Re: MUM Poland 2010 thread

I would love to see a RB493G. Can't wait to see what new wireless products are forthcoming.
by jcrites2008
Fri Feb 26, 2010 6:13 pm
Forum: RouterBOARD hardware
Topic: New Routerboard ??? More powerfull than RB1000
Replies: 14
Views: 2635

Re: New Routerboard ??? More powerfull than RB1000

It was sent out in announcement to the notification list. You can sign up on http://www.mikrotik.com

I found a link "newsletters" but it doesn't show the new one. Also, I can't find the place to sign up :(
by jcrites2008
Tue Feb 23, 2010 1:18 am
Forum: Wireless Networking
Topic: Bonding experiment not working!
Replies: 7
Views: 1811

Re: Bonding experiment not working!

IMHO the best setup for "bonding" wireless links is using OSPF. You dedicate one radio to transmitting and the other to receiving and you get the added benefit of failover with OSPF. http://wiki.mikrotik.com/wiki/Dual_Setup_with_OSPF http://wiki.mikrotik.com/wiki/OSPF_to_simulate_full_duplex_links_...
by jcrites2008
Wed Feb 17, 2010 11:54 pm
Forum: Wireless Networking
Topic: Bonding experiment not working!
Replies: 7
Views: 1811

Re: Bonding experiment not working!

IMHO the best setup for "bonding" wireless links is using OSPF. You dedicate one radio to transmitting and the other to receiving and you get the added benefit of failover with OSPF. http://wiki.mikrotik.com/wiki/Dual_Setup_with_OSPF http://wiki.mikrotik.com/wiki/OSPF_to_simulate_full_duplex_links_...
by jcrites2008
Wed Feb 17, 2010 7:19 pm
Forum: Wireless Networking
Topic: Bonding experiment not working!
Replies: 7
Views: 1811

Bonding experiment not working!

Ok, so here's my setup. I've got a Routerboard connected to 2 AP's on ether2 and ether3. These AP's have 1 client each connected to them. These clients are connected to another routerboard on ether2 and ether3. I've enabled bonding on ether2 and ether3 on both routerboards. Note that my two wireless...
by jcrites2008
Tue Feb 16, 2010 7:38 pm
Forum: RouterBOARD hardware
Topic: Hot new Mikrotik Radio Card - R52Hn
Replies: 66
Views: 16771

Re: Hot new Mikrotik Radio Card - R52Hn

So, you'll really have to be careful about what boards you put these in by making sure it can output enough power to the cards.
by jcrites2008
Thu Feb 11, 2010 1:57 am
Forum: RouterBOARD hardware
Topic: Why need two power jacks on RB450?
Replies: 5
Views: 1485

Re: Why need two power jacks on RB450?

Batteries that can be used are 12V from 1-5Ah. PSU switching adapters are recommended 13-13.8V so that they can charge these batteries. The battery in the picture is lead-acid jelly type. From this 2.2Ah battery, this device will work around 2 hours at full load. _DSC0158.jpg Can the power supply b...
by jcrites2008
Wed Feb 10, 2010 11:42 pm
Forum: RouterBOARD hardware
Topic: RB750G and PoE
Replies: 11
Views: 5440

Re: RB750 and PoE

RB750G have five gigabit ports. Ether1 support passive POE with 100mbit speed and Mikrotik gbit POE with 1000mbit speed
What is Mikrotik gbit POE?

Thanks.
by jcrites2008
Wed Feb 10, 2010 7:56 pm
Forum: RouterBOARD hardware
Topic: Hot new Mikrotik Radio Card - R52Hn
Replies: 66
Views: 16771

Re: Hot new Mikrotik Radio Card - R52Hn

Did anyone else notice, doing the math these things require max 2.1 A. That's way higher than any of the other Mikrotik cards.
by jcrites2008
Wed Feb 03, 2010 6:27 pm
Forum: RouterBOARD hardware
Topic: Hot new Mikrotik Radio Card - R52Hn
Replies: 66
Views: 16771

Re: Hot new Mikrotik Radio Card - R52Hn

RB133 has a 175MHz processor that will be at 100% all time and it cannot use the card. I checked and the CPU was definitely below 50%! Anyway, I'm pretty sure I tested with 2 RB600's when we had them and it wasn't much better. I'll probably just try a few more things and then end up trying the new ...
by jcrites2008
Tue Feb 02, 2010 11:43 pm
Forum: RouterBOARD hardware
Topic: Hot new Mikrotik Radio Card - R52Hn
Replies: 66
Views: 16771

Re: Hot new Mikrotik Radio Card - R52Hn

Using 1 chain I only get around 7 Mbps. I'm testing indoors at close range. Do I still need to keep the antennas a certain distance apart and use different polarizations? What RouterBoards? What frequency? Dual antennas? CCQ? I tested a pair last weekend in RB800s on our office conference table. I ...
by jcrites2008
Sat Jan 30, 2010 1:23 am
Forum: Wireless Networking
Topic: Radio Mobile basics
Replies: 3
Views: 814

Re: Radio Mobile basics

Just found a cool link calculator site that you might be interested in: http://ligowave.com/linkcalc
by jcrites2008
Sat Jan 30, 2010 1:17 am
Forum: Wireless Networking
Topic: Routerboard 433UAH
Replies: 5
Views: 2005

Re: Routerboard 433UAH

Not exactly what I was hoping for, file server would be nice.
by jcrites2008
Fri Jan 29, 2010 8:33 pm
Forum: RouterBOARD hardware
Topic: Hot new Mikrotik Radio Card - R52Hn
Replies: 66
Views: 16771

Re: Hot new Mikrotik Radio Card - R52Hn

Using 1 chain I only get around 7 Mbps. I'm testing indoors at close range. Do I still need to keep the antennas a certain distance apart and use different polarizations?
by jcrites2008
Fri Jan 29, 2010 8:31 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 287339

Re: 802.11n

When testing indoors at close range, do you still need to keep the antennas a certain distance apart and use different polarizations? I'm using 2 R52n's.

Thanks,

Jason
by jcrites2008
Thu Jan 28, 2010 6:53 pm
Forum: RouterBOARD hardware
Topic: Hot new Mikrotik Radio Card - R52Hn
Replies: 66
Views: 16771

Re: Hot new Mikrotik Radio Card - R52Hn

Anyone else test these yet to see how well they perform? Do they outperform the R52n? I've had no luck getting anything greater than 30 Mbps UDP on 5 GHz or 2 GHz. I've tried several different people's configs who say they get close to 100, but not me!
by jcrites2008
Wed Jan 27, 2010 8:57 pm
Forum: Wireless Networking
Topic: Radio Mobile basics
Replies: 3
Views: 814

Re: Radio Mobile basics

Yeah I have trouble getting good estimates from it too... But it's still nice to see the side view of the link.
by jcrites2008
Tue Dec 29, 2009 6:44 pm
Forum: Wireless Networking
Topic: Can't get R52N to do 40MHz
Replies: 7
Views: 1222

Re: Can't get R52N to do 40MHz

I'm trying to do 2.4 802.11n with 40 MHz.
by jcrites2008
Mon Dec 28, 2009 11:40 pm
Forum: Wireless Networking
Topic: Can't get R52N to do 40MHz
Replies: 7
Views: 1222

Can't get R52N to do 40MHz

Try as I may, I cannot get R52N's to do 40MHz. I've got 2 antenna's hooked up to them. I've tried basically all the combinations possible on the ht chains. I've enabled the HT extension channel. I've tried changing the HT Guard Interval to long. And I've tried numerous settings with N-streme enabled...
by jcrites2008
Wed Dec 09, 2009 7:31 pm
Forum: Wireless Networking
Topic: Routerboard 433UAH
Replies: 5
Views: 2005

Re: Routerboard 433UAH

I would like to know more about this as well! Sounds promising.
by jcrites2008
Wed Sep 09, 2009 6:22 pm
Forum: RouterBOARD hardware
Topic: RB433AH's CPU chokes on version 4 beta4
Replies: 3
Views: 931

RB433AH's CPU chokes on version 4 beta4

Ok, we recently got some of the new R52N cards and wanted to try them out. First, I tried one R52N card in a RB133 and another R52N in another RB133. I made on an AP, and one a client. It took me awhile to figure out why it could only do around 13 Mbps, but I finally came to the conclusion that it w...
by jcrites2008
Thu Nov 06, 2008 7:28 pm
Forum: RouterBOARD hardware
Topic: RB 433AH Micro SD Card - When will we be able to use this?
Replies: 21
Views: 11088

Re: RB 433AH Micro SD Card - When will we be able to use this?

Oh really?? So, how do you go about using the store command with a micro-SD card?
by jcrites2008
Wed Nov 05, 2008 12:34 am
Forum: RouterBOARD hardware
Topic: RB 433AH Micro SD Card - When will we be able to use this?
Replies: 21
Views: 11088

Re: RB 433AH Micro SD Card - When will we be able to use this?

As it turns out, a web server and ftp server are already built into RouterOS. If you type in the ip address of the Routerboard, it will bring up a web interface for your device. Not only that, but you can also download the Winbox software from it! Also, you can ftp into router OS and transfer files ...
by jcrites2008
Tue Nov 04, 2008 8:01 pm
Forum: RouterBOARD hardware
Topic: RB 433AH Micro SD Card - When will we be able to use this?
Replies: 21
Views: 11088

Re: RB 433AH Micro SD Card - When will we be able to use this?

I am also wondering if micro-sd cards can be used for storage on RouterOS. Is it possible to access the files stored on the card through a http or ftp connection to the Routerboard? Can RouterOS be a webserver or is there any plans in the future for it? Our WISP is wanting to be able to download fil...
by jcrites2008
Fri May 02, 2008 11:00 pm
Forum: The Dude
Topic: Graphing an average of pings
Replies: 1
Views: 1332

Graphing an average of pings

Hello, I would like to find a way to graph an average of pings. Basically, I want to be able to ping 5-10 different clients off of the same site, find the average ping, and then graph the average. This way we could tell if there might be something wrong with the site, such as if the average ping is ...