Community discussions

MUM Europe 2020

Search found 547 matches

  • 1
  • 2
by Egate
Thu Dec 27, 2018 3:44 pm
Forum: General
Topic: Radius server with auto bank reconciliation
Replies: 0
Views: 237

Radius server with auto bank reconciliation

Does anybody know of a radius server with auto bank reconciliation capability’s. I have found quite a few cloud based solutions but no solution with a on site server and/or once off payment. Our exchange rate is just too unstable for us to make use of a month USD payment plan. Or perhaps billing sof...
by Egate
Sun Sep 16, 2018 5:31 pm
Forum: General
Topic: Mikrotik attacked. No idea how.
Replies: 7
Views: 945

Re: Mikrotik attacked. No idea how.

Thanks. Looks like Netinstall it is. :-)
by Egate
Sun Sep 16, 2018 5:01 pm
Forum: General
Topic: Mikrotik attacked. No idea how.
Replies: 7
Views: 945

Re: Mikrotik attacked. No idea how.

Hi Thanks for the quick response. Nothing strange in logs. Only some OSPF error logs. Probably just a route that changed. Found a strange script about two weeks back. Upon investigation i found it to be the socks hack, but did not find any scheduler or php file or other changes, mentioned in the for...
by Egate
Sun Sep 16, 2018 11:37 am
Forum: General
Topic: Mikrotik attacked. No idea how.
Replies: 7
Views: 945

Mikrotik attacked. No idea how.

Hi. This morning our CCR1016-12G was attacked but i have no idea how. It has the latest firmware installed. Did this after i found the router was compromised using the socks attack. Also changed the password when i installed the firmware and disabled socks as well as all other services except winbox...
by Egate
Wed Mar 28, 2018 10:58 pm
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 16298

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

We are rural, don’t have fiber yet. :( Actually our WISP has, but at a price that bleeds you dry. :D We used to run nv2 without password and then started running into problems when the competitors also started using nv2, we started using password. Did not find any significant change in speed. Also r...
by Egate
Wed Mar 28, 2018 7:41 am
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 16298

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

Can also try setting TDMA Period size to 3ms instead of auto.
by Egate
Tue Mar 27, 2018 9:44 pm
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 16298

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

I hear you and can't agree more.
by Egate
Tue Mar 27, 2018 6:21 pm
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 16298

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

I am sure that is also part of it. Can imagine it is difficult to develop your software around what the radio chipsets is capable off. Most of the other vendors do their own hardware development, giving the possibility to change the radio as well. In my opinion, all of them is using some form of Lin...
by Egate
Tue Mar 27, 2018 3:58 pm
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 16298

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

When we started up, many moons back, we were the only WISP and Atheros chips were great. Then things started getting more and more crowded and data usage sky rocketed. Would today at any given time scan around 35 different AP's of whom i am aware of 5 WISP's. Handling interference/filtering in my op...
by Egate
Tue Mar 27, 2018 10:25 am
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 16298

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

Have always been an adamant Mikrotik supporter and still is. Will always be using there switches and routers. Nothing out there with same capability’s at the price. Unfortunately they do not develop their own radio equipment in house, which is where the problem is, especially in noisy environment. T...
by Egate
Mon Oct 16, 2017 5:45 pm
Forum: Wireless Networking
Topic: Fishey WIFI
Replies: 0
Views: 325

Fishey WIFI

Hi Have a link running on 8035 for many years. Suddenly starting to drop. If doing wireless snoop there is all of a sudden four clients on this frequency, but if doing a Wireless packet sniffer there is high bandwidth users not showing in scan or snoop. Not sure what to make of this? Still have Mikr...
by Egate
Sat Aug 05, 2017 4:57 pm
Forum: Beginner Basics
Topic: src-to address scenari load balancing to wans
Replies: 1
Views: 278

Re: src-to address scenari load balancing to wans

Google "Mikrotik PCC" lots of examples to load balance two wans using PCC.
by Egate
Sat Aug 05, 2017 4:56 pm
Forum: Beginner Basics
Topic: PPPOE client and multiple public static IP
Replies: 1
Views: 540

Re: PPPOE client and multiple public static IP

Dont have to use it. Only if you have a server that also need publick ip? Normaley would be ok if you use one ip and route rest of trafic through Mikrotik with nat.
by Egate
Sat Aug 05, 2017 4:53 pm
Forum: Beginner Basics
Topic: Does ECMP need a failover method?
Replies: 1
Views: 353

Re: Does ECMP need a failover method?

ECMP use either one route or the other. Is baiscley alreadey fail over. If one is dead, onley one will function. That said, ECMP is not very good for load ballancing. Rather Google "mikrotik pcc" Much better for load balancing with fail over build in.
by Egate
Sat Aug 05, 2017 4:50 pm
Forum: Beginner Basics
Topic: mikrotik accounting
Replies: 1
Views: 301

Re: mikrotik accounting

Not sure what accounting you want to do? The anser would be yes, but for data usages, you would need a radius set up to do the accounting. Either on mikrotik or free standing server.
by Egate
Sat Aug 05, 2017 4:46 pm
Forum: Beginner Basics
Topic: Limit bandwitdh for IP range?
Replies: 2
Views: 1631

Re: Limit bandwitdh for IP range?

Just Google "mikrotik simple queues" or "mikrotik qos". Will find plenty examles.
by Egate
Tue Apr 11, 2017 7:41 am
Forum: General
Topic: Bank Statement import billing
Replies: 6
Views: 793

Re: Bank Statement import billing

Hi Idlemind.

Currentley using Radius Manager. Is software based on freeradius.
by Egate
Mon Apr 10, 2017 4:40 pm
Forum: General
Topic: Bank Statement import billing
Replies: 6
Views: 793

Re: Bank Statement import billing

Thanks for the responce. As you mentioned, would not help me much, but is always interisting to see how other people accomplish this. We recieve a lot of internet banking payments into our account, causing the bank to send a automated email of payment or once every twelve hourse a csv file of all tr...
by Egate
Mon Apr 10, 2017 10:15 am
Forum: General
Topic: Bank Statement import billing
Replies: 6
Views: 793

Bank Statement import billing

Anybody know of a free standing, not cloud based, billing system that can import payments from a bank statement. Any, suggested/info would be appreciated.
by Egate
Sat Nov 29, 2014 9:42 am
Forum: General
Topic: Mikrobill radius closed down
Replies: 1
Views: 747

Mikrobill radius closed down

Was in the process of testing Mikrobill.com when they abruptly closed. Do not know what happened but found it to be exceptional software. Does any body know of other radius software that integrates into Quickbooks accounting software? Any info would be appreciated.
by Egate
Thu Oct 02, 2014 9:11 pm
Forum: Beginner Basics
Topic: How to set interface dependency?
Replies: 7
Views: 1595

Re: How to set interface dependency?

Would probably need to add some kind of counter. If, as an example three pings is not successful, disable VLan.
by Egate
Sun Sep 14, 2014 9:16 pm
Forum: Beginner Basics
Topic: How to set interface dependency?
Replies: 7
Views: 1595

Re: How to set interface dependency?

This might help. Put in script. Need to modify do a bit, to soot you.


:local pingTarget 8.8.8.8
:local pingResult

#########################################################

:set pingResult [ping $pingTarget interface=pppoe-out1 ]
:if ($pingResult = 0) do={
by Egate
Sun Sep 14, 2014 4:47 pm
Forum: General
Topic: NAT Routing!
Replies: 1
Views: 580

Re: NAT Routing!

Best solution i can think off is instead of using switch put small router like RB750. Give PC1, PC 2 and server ip in different sub-net range. This will function as required.
by Egate
Sun Sep 14, 2014 4:43 pm
Forum: The Dude
Topic: Monitoring OSPF
Replies: 2
Views: 1301

Re: Monitoring OSPF

Haven't got a answer to your question, but what do you want to accomplish?
by Egate
Sun Sep 14, 2014 4:39 pm
Forum: Beginner Basics
Topic: How to set interface dependency?
Replies: 7
Views: 1595

Re: How to set interface dependency?

Just Google. There is scripts that ping an ip through a pre determined gateway, normally DNS server ip. Use the PPPoE interface as gateway.
by Egate
Sun Sep 14, 2014 4:31 pm
Forum: General
Topic: 2isp 1 RB751
Replies: 2
Views: 624

Re: 2isp 1 RB751

Google PCC load balancing. Will actually make use of both connections and if one drop just us the one connection.
by Egate
Sun Sep 14, 2014 4:20 pm
Forum: General
Topic: activate queue in two minutes after login
Replies: 1
Views: 629

Re: activate queue in two minutes after login

Don't know about the 2 munit, but i have a queue set up for VOIP in order to allow VOIP at max speed. Have a script running every few sec moving this queue to the top of the list. This kind of setup should accomplish what you want except that it allows data to your server at higher speed.
by Egate
Sun Aug 31, 2014 10:59 am
Forum: General
Topic: pppoe client loadbalance & pppoe server
Replies: 3
Views: 1050

Re: pppoe client loadbalance & pppoe server

Google PCQ load balancing. Better way of doing this without breaking secure connections. Lots of howto's. Also, yes. Possible to do on same router. Actually easier this way. Only difference you would use PPPoE interface instead of ether interface in load balancing.
by Egate
Fri Aug 15, 2014 7:49 pm
Forum: General
Topic: Mikrotik PPPoE client disconnect with radius.
Replies: 2
Views: 1277

Re: Mikrotik PPPoE client disconnect with radius.

Hi. Thanks for the feedback, but found the problem. One of the router's passing through was incorrectly set up with masquerading. This caused the PPPoE server to drop the request because it appeared not to originate from the radius server ip.
by Egate
Wed Aug 06, 2014 8:37 pm
Forum: General
Topic: Mikrotik PPPoE client disconnect with radius.
Replies: 2
Views: 1277

Mikrotik PPPoE client disconnect with radius.

Hi. Use Mikrotik Hotspot with DMA Radius to authenticate and disconnect users. Works good. Also have some AP's set up as PPPoE server with user connecting to AP using PPPoE client to authenticate with radius. Works good, but prolem is, radius does not disconnect PPPoE client. If i do this manual, th...
by Egate
Sun May 11, 2014 11:40 pm
Forum: General
Topic: NV2 and WDS...
Replies: 11
Views: 2331

Re: NV2 and WDS...

Don't have to connect to AP1. Your original proposal would still function except that you would connect with the client WIFI /Wlan2 to the next AP Bridge / Wlan1 and so forth.
by Egate
Sat May 10, 2014 9:57 pm
Forum: General
Topic: NV2 and WDS...
Replies: 11
Views: 2331

Re: NV2 and WDS...

Sorry.
On AP 2 set WLan1 to station and connect it to main AP. Set WLan2 to to AP Bridge.
On AP 3 set WLan1 to station and connect it to main AP. Set WLan2 to to AP Bridge.
On AP 4 set WLan1 to station and connect it to main AP. Set WLan2 to to AP Bridge.
by Egate
Fri May 09, 2014 7:41 am
Forum: General
Topic: NV2 and WDS...
Replies: 11
Views: 2331

Re: NV2 and WDS...

It will work, but not necessary if you have two WLan's. Set WLan1 on AP connected to router to AP Bridge lets call it Main AP. On AP 2 set WLan1 to station and connect it to main AP. Set WLan1 to to AP Bridge. On AP 3 set WLan1 to station and connect it to main AP. Set WLan1 to to AP Bridge. On AP 4...
by Egate
Sun May 04, 2014 6:29 pm
Forum: General
Topic: NV2 and WDS...
Replies: 11
Views: 2331

Re: NV2 and WDS...

Personally only use RB433AH and some RB912 but none with R11E-2HPND. However, if you go into winbox under wireless you would should find wlan1 and wlan2 which would be your two wifi cards. The first RB, connected to the LAN, with mode = ap bridge, the other in station bridge? This would be the corre...
by Egate
Sun May 04, 2014 11:26 am
Forum: General
Topic: NV2 and WDS...
Replies: 11
Views: 2331

Re: NV2 and WDS...

Yep, would definitely have to use WDS in order for this setup to function, however, this is a very bad way of doing this. Every time you jump a AP further away from the AP connected to the router, your pings will double. Do not know your RB used as AP, but if possible, rather add an extra card to ea...
by Egate
Sun May 04, 2014 12:34 am
Forum: General
Topic: operating voltage and board temperature
Replies: 1
Views: 652

Re: operating voltage and board temperature

Can confirm, the RB 912 does run rather hot. Although we only use 24Volt. Personally i believe this is coming from the radio. Normally the more power, the more heat. Had a similar problem with watchdog. Replaced RB912 replaced with another RB912. Same problem. Eventually i found that the switch the ...
by Egate
Sun May 04, 2014 12:24 am
Forum: General
Topic: NV2 and WDS...
Replies: 11
Views: 2331

Re: NV2 and WDS...

Have to admit, have got no idea what you are saying. Made a bit of a drawing? What i can say, you should not need WDS and also make sure the station is set to same protocol as the AP bridge. Only thing that would do this, unless you fiddled with security profiles and settings.
by Egate
Sun May 04, 2014 12:14 am
Forum: Beginner Basics
Topic: Share printer with two networks
Replies: 2
Views: 2127

Re: Share printer with two networks

Sounds like routing problem. Don't need rules to accomplish this, maybe masquerade rule with ether 2 as out interface, because most printers can only set gateway. Create route in pc using 192.168.0.0/24 (actual ip of router) as gateway for destination ip 192.168.1.0/24.
by Egate
Sat May 03, 2014 11:50 am
Forum: General
Topic: pcq with different LAN output and different users
Replies: 3
Views: 692

Re: pcq with different LAN output and different users

Bridge and queue normally does not play nice. One thing to keep in mind is that you can actually only control speed of data going out of router. You don't have control of data coming in. Can drop packages and TCP will a just, but will always try and increase speed. With most queues you would hav a b...
by Egate
Sat May 03, 2014 11:22 am
Forum: General
Topic: Port forwarding across Nat'd network
Replies: 12
Views: 1740

Re: Port forwarding across Nat'd network

Ok, my bad. Assumed equipment was mikrotik equipment. Which make modem and what mikrotik gear do you have?
by Egate
Fri May 02, 2014 11:57 pm
Forum: General
Topic: Port forwarding across Nat'd network
Replies: 12
Views: 1740

Re: Port forwarding across Nat'd network

Add this to firewall nat, should function if you enter 192.168.6.1:808 in browser. Read explanation again. add action=dst-nat chain=dstnat comment="Publick IP" \ disabled=no dst-address=192.168.6.1 dst-port=808 protocol=tcp \ to-addresses=192.168.0.100 to-ports=80 add action=masquerade chain=srcnat ...
by Egate
Fri May 02, 2014 12:27 am
Forum: Beginner Basics
Topic: Replacement for pfSense - getting started?
Replies: 1
Views: 845

Re: Replacement for pfSense - getting started?

Unfortunately mikrotik is a bit more hands on. If you want it done, you have to tell mikrotik to do it. This is what makes it powerful, but also give it a bit of a learning curve. In your case, you most probably did not set up a default route. Do some reading on that as well. :-) In IP - route creat...
by Egate
Fri May 02, 2014 12:18 am
Forum: General
Topic: hotspot walled garden hits
Replies: 2
Views: 718

Re: hotspot walled garden hits

Only have 6.2 but unless something changed, you would not see hits. If you put something, as example website url, in wallet garden and you can access it when not logged into hotspot, it is functioning.
by Egate
Fri May 02, 2014 12:16 am
Forum: General
Topic: pcq with different LAN output and different users
Replies: 3
Views: 692

Re: pcq with different LAN output and different users

Fortunately, or unfortunately there is so many ways to do this. M y suggestion is use simple queue for each ip, but read this http://wiki.mikrotik.com/wiki/Bandwidth ... and_Queues some examples, but there are so many more.
by Egate
Fri May 02, 2014 12:11 am
Forum: General
Topic: Firewall->Filter Rules Dst-Address is being ignored
Replies: 5
Views: 907

Re: Firewall->Filter Rules Dst-Address is being ignored

Yes. :-)
Traffic to address 192.168.120.250 on port 80 from src-address-list=test add src-address to address list named test2.
by Egate
Fri May 02, 2014 12:06 am
Forum: General
Topic: Port forwarding across Nat'd network
Replies: 12
Views: 1740

Re: Port forwarding across Nat'd network

Forwarding port 80 is almost always a bad idea, because there is so many things using port 80, not least of all web pages. In this case you would create a firewall rule in access point firewall dst-nat with dst ip 192.168.6.1 and action dst-ip = 192.168.0.100 This will route all traffic coming in on...
by Egate
Thu Apr 24, 2014 6:53 pm
Forum: Wireless Networking
Topic: help me two ptp
Replies: 9
Views: 1546

Re: help me two ptp

Hi RB912 is has dual chain radio. This means you can use two aerial cables, connected to the RB912. Connect one to one dish and other to second dish. Do the same on other side. that is it. Just make sure that one dish is horizontal polarized and second dish vertical, on both sides.
by Egate
Thu Apr 24, 2014 6:41 pm
Forum: General
Topic: WISP PCC, double nat, gamers strict nat any suggestions
Replies: 6
Views: 2006

Re: WISP PCC, double nat, gamers strict nat any suggestions

Hi. Woknew, your idea is sound. but i would only be able to accommodate one client per PPPoE. Very officiant way of doing it. Have no Vlan out. This brings me to MovingNetworksFwd. The VPN is actual a very good idea, almost perfect, exept for the fact that we are in South Africa without any local VP...
by Egate
Wed Apr 23, 2014 12:18 am
Forum: General
Topic: Monitoring traffic through routers
Replies: 10
Views: 1722

Re: Monitoring traffic through routers

Even if it is a bridged network. If your routing is set up correct, you should still be able to see the route/hops taken when running trace-route. Also maybe to clarify. If set up in a bridge environment. Data coming in on one port, will be retransmitted on all other ports that is part of the router...
by Egate
Wed Apr 23, 2014 12:08 am
Forum: General
Topic: no ping no access to set ip address
Replies: 2
Views: 536

Re: no ping no access to set ip address

Probably masquerading. In firewall - nat create rule using src-nat, out interface the PI is connected and action masquerading. Is actually a way around routing, which is the actual problem.
by Egate
Wed Apr 23, 2014 12:05 am
Forum: General
Topic: Local and remote DNS resolution for Hotspot
Replies: 4
Views: 1369

Re: Local and remote DNS resolution for Hotspot

Standard setup. Can put 8.8.8.8 in hotspot DNS. IF user enters hotspot.mysite.com he wil get log in. If he enter hotspot.mysite.com, after logged in, will have the option to log off. If chosen, he would be able to log in with another PC. Only problem is because there is written a cooky into browser,...
by Egate
Tue Apr 22, 2014 11:57 pm
Forum: Beginner Basics
Topic: Please Help me With CCR Ports
Replies: 3
Views: 733

Re: Please Help me With CCR Ports

Perhaps i miss interpret, but no different setup for 1 wan or for 5 wan. Authentication happens in hotspot, connecting to radius. Does not matter how many internet connections.
by Egate
Tue Apr 22, 2014 8:20 pm
Forum: General
Topic: Monitoring traffic through routers
Replies: 10
Views: 1722

Re: Monitoring traffic through routers

Sorry, not something you can tip on. If you disable the bridge, you would have to static add routes, in order to route traffic from one router to the next, or make use of automatic routing protocol like RIP or OSPF. This normally is used in bigger networks.
by Egate
Tue Apr 22, 2014 10:02 am
Forum: General
Topic: Monitoring traffic through routers
Replies: 10
Views: 1722

Re: Monitoring traffic through routers

Sounds like you have a bridged network. Needs to be routed in order for this to function.
by Egate
Mon Apr 21, 2014 11:45 pm
Forum: Beginner Basics
Topic: Please Help me With CCR Ports
Replies: 3
Views: 733

Re: Please Help me With CCR Ports

What is the problem? What do you want to set up? If you want to set up mikrotik to use radius, just create radius in mikrotik with radius ip and secret. Is documented in DMA documents.
by Egate
Mon Apr 21, 2014 11:36 pm
Forum: Beginner Basics
Topic: PCC balancing and QOS is possible in same router ???
Replies: 3
Views: 1094

Re: PCC balancing and QOS is possible in same router ???

Only QOS you will be able to do is on the output chain, for uploads. Won't be able to do control on incoming data, (download) What this come down to is that it does not really matter if it is before or after PCC, because you do not use output chain in PCC.
by Egate
Mon Apr 21, 2014 7:34 pm
Forum: General
Topic: WISP PCC, double nat, gamers strict nat any suggestions
Replies: 6
Views: 2006

Re: WISP PCC, double nat, gamers strict nat any suggestions

Hi Rick. Thanks for the response. Two problems. First of the ADSL is PPPoE connections with public ip's, but not static. Change when ever connection is lost. Second this is the only public ip's available, only 30. Did have a look around and found a provider that will supply 5 static ip's per PPPoE c...
by Egate
Sun Apr 20, 2014 11:17 pm
Forum: General
Topic: Monitoring traffic through routers
Replies: 10
Views: 1722

Re: Monitoring traffic through routers

Trace route tells you exactly this. Ping only tells you if a packet went through. If you want a more graphical version, try the software VisualRoute.
by Egate
Sun Apr 20, 2014 1:33 pm
Forum: General
Topic: How to route all traffic of a host trough a gateway eith man
Replies: 1
Views: 559

Re: How to route all traffic of a host trough a gateway eith

There is examples and wiki of this. Just Google with mikrotik as part of search.
by Egate
Sun Apr 20, 2014 1:32 pm
Forum: Beginner Basics
Topic: PCC balancing and QOS is possible in same router ???
Replies: 3
Views: 1094

Re: PCC balancing and QOS is possible in same router ???

Is possible. Did it few years back, but is a shlep. Search google with those topics and include mikrotik as part of search. There is lots of examples, just need to chose what fits you.
by Egate
Sun Apr 20, 2014 1:29 pm
Forum: General
Topic: Monitoring traffic through routers
Replies: 10
Views: 1722

Re: Monitoring traffic through routers

Best solution would be using trace route, under tools. Will indicate ip path as used.
by Egate
Sun Apr 20, 2014 1:25 pm
Forum: General
Topic: Queue on 10 min
Replies: 1
Views: 450

Re: Queue on 10 min

Have a look at ques and bursting. By setting bust limit, you can set data to be set back to limit if using more than allocated. Normally set up for few seconds, but guise would work for minutes. Lots of examles and WIKI on this.
by Egate
Sun Apr 20, 2014 1:19 pm
Forum: Beginner Basics
Topic: Encrypt all traffic over wireless P2P link w/vlan
Replies: 6
Views: 1881

Re: Encrypt all traffic over wireless P2P link w/vlan

Create L2TP link between two pannels. Route traffic from lan over this instead of Wlan. Will actually be over Wlan but using L2TP which is encrypted. Create Vlan2 with id2 using L2TP on bouth routers. Any Vlan2 traffic entering one pannel will be accessible other pannel. Creating Vlan or L2TP wil be...
by Egate
Sun Apr 20, 2014 1:03 pm
Forum: General
Topic: WISP PCC, double nat, gamers strict nat any suggestions
Replies: 6
Views: 2006

WISP PCC, double nat, gamers strict nat any suggestions

We only have access to 4Mb/s ADSL lines. In order to function as a WISP, we have 30 of these lines set up in a PCC setup and of cause using masquerading on the WAN side. Our clients has a SXT panel that is also set up with masquerading and sub-net /29 to supply them with 5 ip's. Classic double natti...
by Egate
Thu Apr 17, 2014 9:35 pm
Forum: General
Topic: setting p UPnP for gaming stations
Replies: 3
Views: 1166

Re: setting p UPnP for gaming stations

Hi Thanks for the reply. Haven't got users with problems to play games. Problem is access is indicated as strict, which according to PS and games like battlefield is because ports is blocked. This cause gamers not to be able to view all the game servers. I of cause does not block any ports but have ...
by Egate
Sat Apr 12, 2014 6:46 pm
Forum: General
Topic: Incompatibility with ps4?
Replies: 24
Views: 15565

Re: Incompatibility with ps4?

Any body solved this? From what i gather this is because of double natting or because a client does not have a public ip. Sure public ip would resolve this, but this means you would have to have few 100 publick ip's.
by Egate
Sat Apr 12, 2014 6:30 pm
Forum: General
Topic: setting p UPnP for gaming stations
Replies: 3
Views: 1166

Re: setting p UPnP for gaming stations

Did you resolve this? Have a client with COD, same problem.
by Egate
Wed Apr 09, 2014 6:28 pm
Forum: Beginner Basics
Topic: Issues with the improved load balancing how to
Replies: 2
Views: 989

Re: Issues with the improved load balancing how to

Try this one, bit newer way of doing it. http://wiki.mikrotik.com/wiki/PCC
by Egate
Sat Jan 25, 2014 4:54 pm
Forum: Wireless Networking
Topic: SXT Lite 5nD r2 not associating problem
Replies: 12
Views: 4989

Re: SXT Lite 5nD r2 not associating problem

A question if a may Emboro. What is the max users you ave connected to a AP?
by Egate
Sat Jan 25, 2014 4:51 pm
Forum: Wireless Networking
Topic: SXT Lite 5nD r2 not associating problem
Replies: 12
Views: 4989

Re: SXT Lite 5nD r2 not associating problem

What i found was in the wireless security profile, the radius - mac authentication option was enabled. When i disabled this option, every thing was functioning as expected.
by Egate
Wed Jan 15, 2014 6:15 pm
Forum: Wireless Networking
Topic: SXT Lite 5nD r2 not associating problem
Replies: 12
Views: 4989

Re: SXT Lite 5nD r2 not associating problem

Just to test this, i added the clients mac to the access list. It immediate associated with AP. This AP has default associate on, this should not happen, but is clear now. We upgraded these AP software to to 5.25 in December. Only reason why all the clients could still associate to Ap was that by ch...
by Egate
Wed Jan 15, 2014 1:04 pm
Forum: Wireless Networking
Topic: SXT Lite 5nD r2 not associating problem
Replies: 12
Views: 4989

Re: SXT Lite 5nD r2 not associating problem

Hi Uldis Thanks for the response. If possible try to reset the wireless interface configuration on the AP and on the non-working station and then configure the settings you only need. Wont be able to reset AP, production AP, but it does function with other clients, including Also please upgrade the ...
by Egate
Tue Jan 14, 2014 2:28 pm
Forum: Wireless Networking
Topic: SXT Lite 5nD r2 not associating problem
Replies: 12
Views: 4989

Re: SXT Lite 5nD r2 not associating problem

No ideas? Got 40 of these units, did not want to send them back to the supplier if it is something i could fix.
by Egate
Sat Jan 11, 2014 9:13 am
Forum: General
Topic: pppoe client question
Replies: 3
Views: 772

Re: pppoe client question

Is fine if you want to use it that way. This is MT, many ways to do this. Only reason for modem ip is to maintain modem with HTTP but actuate ip used for internet is ip assigned by PPPoE client. Personaly i would always use the PPPoE interface. MT sort the ip's.
by Egate
Fri Jan 10, 2014 10:11 pm
Forum: Beginner Basics
Topic: need help
Replies: 3
Views: 631

Re: need help

How do you authenticate users? Hotspot, radius, userman ? Most of them has a time option.
by Egate
Fri Jan 10, 2014 10:08 pm
Forum: General
Topic: Working with multiple Default Gateways
Replies: 1
Views: 1042

Re: Working with multiple Default Gateways

Don't know your exact problem , but the solution. 8) Works for me. Create rule in mangle and mark all sip packets or sip server destination address. Then mark all connections using packet mark as qualifier and then use connection mark as qualifier to crate routing mark. Create route using routing ma...
by Egate
Fri Jan 10, 2014 10:00 pm
Forum: General
Topic: pppoe client question
Replies: 3
Views: 772

Re: pppoe client question

No need for bridge. Can assign ip to Ether interface modem is connected to and of cause to modem. Will be able to access HTTP of modem. IN MT the PPPoE will be gateway interface to access internet.
by Egate
Fri Jan 10, 2014 9:56 pm
Forum: General
Topic: Request for billing system
Replies: 2
Views: 678

Re: Request for billing system

Try radius manager.
by Egate
Fri Jan 10, 2014 9:55 pm
Forum: Wireless Networking
Topic: Merge Eth & wLan as one
Replies: 3
Views: 898

Re: Merge Eth & wLan as one

Create bridge and add Ether 1 and Wlan1 as ports. This will create transparent link comparable to having lan cable between two points.
by Egate
Fri Jan 10, 2014 9:46 pm
Forum: Wireless Networking
Topic: SXT Lite 5nD r2 not associating problem
Replies: 12
Views: 4989

Re: SXT Lite 5nD r2 not associating problem

Ok. Went to the neighboring town, about 90km away. Carbon copy of main site, a bit newer hardware but again RB433 with two PCI radio cards. OS 5.23. Took SXT Light and standard SXT. Both connected perfect. This is really confusing. :? Have eight AP on our main site and latest stock SXT Light does no...
by Egate
Fri Jan 10, 2014 3:05 pm
Forum: Wireless Networking
Topic: SXT Lite 5nD r2 not associating problem
Replies: 12
Views: 4989

Re: SXT Lite 5nD r2 not associating problem

No info is displayed in AP log when client try to connect. The AP not associated to export. # jan/10/2014 14:18:25 by RouterOS 6.7 # software id = VWY0-E9UM # /interface wireless set [ find default-name=wlan2 ] band=5ghz-a/n country="south africa" \ disabled=no frequency=5580 ht-rxchains=0,1 ht-txch...
by Egate
Fri Jan 10, 2014 11:24 am
Forum: Wireless Networking
Topic: SXT Lite 5nD r2 not associating problem
Replies: 12
Views: 4989

Re: SXT Lite 5nD r2 not associating problem

HI. Upgraded both to OS 6.7 and reset to client to default and set up again. Does not want to associate with these AP's. However got it to associate wit a PTP link that is about 10km further and -83b signal. The problem though is that the AP is RB433AH with two RB52 HN radio cards on each. The PTP i...
by Egate
Thu Jan 09, 2014 10:19 am
Forum: Wireless Networking
Topic: SXT Lite 5nD r2 not associating problem
Replies: 12
Views: 4989

SXT Lite 5nD r2 not associating problem

Strange one. Got few of this Lite units. They do not want to associate to AP. In log it say "failed to connect , on 5580000 not allowed" and also on some "failed to connect , on 5300000 not allowed-too many clients" Have on average 30 users connected using this AP's. Give this message for eight AP's...
by Egate
Fri Nov 22, 2013 8:39 am
Forum: General
Topic: PCC with Netwatch Style Script?
Replies: 6
Views: 1289

Re: PCC with Netwatch Style Script?

Thanks
by Egate
Thu Nov 21, 2013 12:09 pm
Forum: Beginner Basics
Topic: PCC Problems w/ quasi/pseudo connection states
Replies: 5
Views: 898

Re: PCC Problems w/ quasi/pseudo connection states

Hi Fewi

Trying to do the same but was wondering. If the ip can't be reached through the specified route, wont it fall back to the default route and ping the ip any way?
by Egate
Thu Nov 21, 2013 11:51 am
Forum: General
Topic: PCC with Netwatch Style Script?
Replies: 6
Views: 1289

Re: PCC with Netwatch Style Script?

Hi cicserver. Did you ever find a working solution for this?
by Egate
Thu Nov 21, 2013 9:54 am
Forum: General
Topic: Managing clients w/ Dyn IP
Replies: 3
Views: 516

Re: Managing clients w/ Dyn IP

Ok. If you say dyn dns i am guessing modem. Need more inf on network. How does your users connect? Do you use hotspot or mikrotik any where?
by Egate
Wed Nov 20, 2013 7:33 pm
Forum: General
Topic: Managing clients w/ Dyn IP
Replies: 3
Views: 516

Re: Managing clients w/ Dyn IP

What do you want to manage?
by Egate
Wed Nov 20, 2013 7:30 pm
Forum: General
Topic: Radius Manager, WIFI ACL and queues
Replies: 1
Views: 971

Radius Manager, WIFI ACL and queues

Have Radius manager running. Was experimenting a bit with authentication of WIFI panel onto a AP. Use the radius to authenticate users onto a hotspot at which time a simple queue is automatically created for the user, dependent on the radius manager settings. What i am wondering is if it would be po...
by Egate
Mon Nov 18, 2013 10:32 pm
Forum: General
Topic: A question about no-mark
Replies: 4
Views: 984

Re: A question about no-mark

Thanks. That explains it. Appreciated.
by Egate
Mon Nov 18, 2013 5:24 pm
Forum: General
Topic: A question about no-mark
Replies: 4
Views: 984

Re: A question about no-mark

Hi thanks. if i understand correct. If you use the no-mark option the rule will not assign the connection a new connection mark if it already has a connection mark?

Have a (unknown 20) connection mark if i look in firewall connection although it appears to be only ospf protocol.
by Egate
Mon Nov 18, 2013 3:50 pm
Forum: General
Topic: A question about no-mark
Replies: 4
Views: 984

A question about no-mark

Hi. A lot of scripts use no-mark as a connection mark. Is this a special mark or does it just have the meaning you should not add a routing mark?
by Egate
Tue Nov 12, 2013 10:40 pm
Forum: General
Topic: Consultint capable of scripting and manipelating arrays.
Replies: 4
Views: 829

Re: Consultint capable of scripting and manipelating arrays.

support at egate dot co dot za
by Egate
Tue Nov 12, 2013 9:56 pm
Forum: General
Topic: Consultint capable of scripting and manipelating arrays.
Replies: 4
Views: 829

Re: Consultint capable of scripting and manipelating arrays.

Any body that could suggest a consultant, capable with scripting?
by Egate
Mon Nov 11, 2013 6:38 pm
Forum: Beginner Basics
Topic: wireless interface stopper running
Replies: 4
Views: 903

Re: wireless interface stopper running

Don't know exactly what model router board u use. On the older once, 433 they had a way of disabling the WIFI it self. Normal the same once that did it and was very rare. Eventual wrote a script that checked, if the WIFI was disabled it just re enabled it. Have nod found any thing like that on the S...
by Egate
Fri Nov 08, 2013 9:44 am
Forum: General
Topic: routerboard + ip phone
Replies: 1
Views: 527

Re: routerboard + ip phone

Only way i know of is by using analog to sip convertor. Small black box, almost looks like POE power supply. Plug phone in on one side and lan cable on the other.
by Egate
Fri Nov 08, 2013 9:42 am
Forum: Beginner Basics
Topic: Download Limits
Replies: 1
Views: 452

Re: Download Limits

Google Mikrotik PCQ examples. WIKI dedicated to this.
by Egate
Fri Nov 08, 2013 9:40 am
Forum: Beginner Basics
Topic: wireless interface stopper running
Replies: 4
Views: 903

Re: wireless interface stopper running

This indicate your wireless link is not created. Scan from station side to be sure you can view the AP.
by Egate
Wed Nov 06, 2013 4:40 pm
Forum: General
Topic: Consultint capable of scripting and manipelating arrays.
Replies: 4
Views: 829

Consultint capable of scripting and manipelating arrays.

Hi. Looking for a consultant that would be capable of creating mikrotik scrip, probably having to manipulate arrays. Will of cause pay for someone with this expertise. Has to do with multi wan manipulation .
by Egate
Wed Sep 11, 2013 7:32 pm
Forum: Scripting
Topic: script getting oldest address-list entry
Replies: 7
Views: 2249

Re: script getting oldest address-list entry

Thanks Skot . Gave it a quick try. :local list :local count 1 :foreach i in=[/ip firewall address-list find] do={ :if ($count = 1) do={ :set list ([/ip firewall address-list get $i list]); } :set count ($count + 1); } /ip firewall address-list { remove [find list="$list"] } /ip firewall address-list...
by Egate
Tue Sep 10, 2013 10:17 pm
Forum: Scripting
Topic: script getting oldest address-list entry
Replies: 7
Views: 2249

Re: script getting oldest address-list entry

Ok, this is wher i am at. :local list :local count 1 :foreach i in=[/ip firewall address-list find] do={ :if ($count = 1) do={ :set list ([/ip firewall address-list get $i list]); } :set count ($count + 1); } /ip firewall address-list { remove [find list="$list"] } :log info "First list: $list"; My ...
by Egate
Sun Sep 01, 2013 12:05 am
Forum: Scripting
Topic: script getting oldest address-list entry
Replies: 7
Views: 2249

Re: script getting oldest address-list entry

Hi Skot, hanks. Works perfect, now for the rest. :)
by Egate
Sat Aug 31, 2013 3:47 pm
Forum: Scripting
Topic: script getting oldest address-list entry
Replies: 7
Views: 2249

script getting oldest address-list entry

Have been trying to write a script to use the oldest entry in an address list. What i found was that if you do a print, no 0 entry in address list will be the oldest. Using the script below i am able to retrieve the last entry an also the amount of entry's in the address list. Have been trying to us...
by Egate
Tue Jul 30, 2013 9:16 pm
Forum: Beginner Basics
Topic: Hotspot access to LAN?
Replies: 2
Views: 616

Re: Hotspot access to LAN?

Depends on your setup of router, but if they know your lan ip, probably. Many ways to preventa basic firewall rule blocking data from on interface to another. Lets say Lan is on Ether1 and AP is Wlan1 the you would make rule with in interface Wlan1 and out interface Ether1 and action set as reject. ...
by Egate
Tue Jul 30, 2013 9:06 pm
Forum: Beginner Basics
Topic: Need Help ( Please help me about Hotspot with AP & PtP)
Replies: 1
Views: 467

Re: Need Help ( Please help me about Hotspot with AP & PtP)

To little info, but sounds like routing problem to me. Make sure you can ping all equipment both ways.
by Egate
Wed Apr 24, 2013 2:22 pm
Forum: General
Topic: PCC Rules and Multi wan
Replies: 4
Views: 889

Re: PCC Rules and Multi wan

if i use only new-connection-mark. i will have 6 rules with new-routing-mark per-connection-classifier = src-address-and-ports: 6/0 new-connection-mark = W01 per-connection-classifier = src-address-and port : 6/1 new-connection-mark = W02 per-connection-classifier = src-address-and port : 6/2 new-c...
by Egate
Wed Apr 24, 2013 8:59 am
Forum: General
Topic: PCC Rules and Multi wan
Replies: 4
Views: 889

Re: PCC Rules and Multi wan

per-connection-classifier = src-address-and-ports: 6/0 new-connection-mark = W01 per-connection-classifier = src-address-and port : 6/1 new-connection-mark = W02 per-connection-classifier = src-address-and port : 6/2 new-connection-mark = W03 per-connection-classifier = src-address-and-Port: 6/3 ne...
by Egate
Fri Jul 27, 2012 11:07 pm
Forum: General
Topic: pcc giving problems
Replies: 10
Views: 1371

Re: pcc giving problems

Disable nating on firewall and add it on on router doing load balance. Can actually use one router for load balancing and firewall.
by Egate
Fri Jul 27, 2012 3:33 pm
Forum: General
Topic: station connection
Replies: 4
Views: 718

Re: station connection

Can try WPA EAP with Tkip group and Tkip unicast.
by Egate
Fri Jul 27, 2012 3:03 pm
Forum: The User Manager
Topic: Please Help Me
Replies: 8
Views: 2523

Re: Please Help Me

Should maybe post network diagram. Only way to count data, is if data go through login server. Not possible if servers is on network before login.
by Egate
Fri Jul 27, 2012 2:58 pm
Forum: General
Topic: pcc giving problems
Replies: 10
Views: 1371

Re: pcc giving problems

1 ip that connecting to load balancing router. it is firewall router
Will only have one ip if you nat/masquerade your traffic before going to load balance.
by Egate
Thu Jul 26, 2012 11:34 pm
Forum: General
Topic: Dude import onto Compact Flash
Replies: 3
Views: 453

Re: Dude import onto Compact Flash

Thanks for the reply. My 433AH only have 61 Mb. At this time i am actually running it on a RB493AH that has 126 MB, but i am running out of space.
by Egate
Thu Jul 26, 2012 9:24 pm
Forum: The User Manager
Topic: Please Help Me
Replies: 8
Views: 2523

Re: Please Help Me

Just ad the game, tv server on the network side before authentication.
by Egate
Thu Jul 26, 2012 9:15 pm
Forum: General
Topic: configuring 7 port with the same vlan id on RB 201L-IN
Replies: 1
Views: 484

Re: configuring 7 port with the same vlan id on RB 201L-IN

This is Mikrotik. You can set it up any way you like. :) Go to interface add a vlan connected to each of the interfaces with the ID you want and port 8 just don't add a Vlan interface attached to port.
by Egate
Thu Jul 26, 2012 9:08 pm
Forum: General
Topic: routing issue
Replies: 1
Views: 615

Re: routing issue

Just use RIP. Go to routing click rip add interface all go to networks and add network. Defaults will be fine. Do this on all router boards. At the router board connected to you internet you go to routing RIP, Rip settings and in drop down box select always. This will auto set up routes, much less o...
by Egate
Thu Jul 26, 2012 8:58 pm
Forum: General
Topic: station connection
Replies: 4
Views: 718

Re: station connection

If you click wireless there will be a security profile tab. Create a new profile with the encryption you need. Click on interface tab, double click Wlan, click wireless tab and select the security profile you just created.
by Egate
Thu Jul 26, 2012 8:52 pm
Forum: General
Topic: Dude import onto Compact Flash
Replies: 3
Views: 453

Dude import onto Compact Flash

Took RB711 and installed a 1 Gig usb compact disk. Installed V5.14 and Dude. Moved Dude and proxy in /stores to the usb and activated. Have a exported dude file that i want to import into Dude. I opened Dude and import file but not possible. If i have a look in system/resources, it is clear that the...
by Egate
Thu Jul 26, 2012 5:39 pm
Forum: General
Topic: pcc giving problems
Replies: 10
Views: 1371

Re: pcc giving problems

Unfortunately this is the luck of the draw. This happen even with more Wan's. Can manually give a routing mark to heavy users and balance them this way.
by Egate
Thu Jul 12, 2012 10:41 am
Forum: General
Topic: Multiple EOIP with bridge. How to split traffick.
Replies: 5
Views: 1791

Re: Multiple EOIP with bridge. How to split traffick.

Hi Peson. Thanks. Mark "Use IP Firewall" in bridge settings. Is enabled. If you want to you can filter the DHCP traffic from the EoIP tunnel with bridge filters and have DHCP servers on both sides. Also did try this before. Did not actually function, because my filter, filtered DHCP on bridge, which...
by Egate
Wed Jul 11, 2012 9:14 pm
Forum: General
Topic: Multiple EOIP with bridge. How to split traffick.
Replies: 5
Views: 1791

Re: Multiple EOIP with bridge. How to split traffick.

Thanks for the reply. That is what i thought as well, however because of the bridge it is not that easy. Also Mikrotik A give ip's and is also the gateway. Did try to mark packages and route out ether 2 instead of EOIP, but you cant mark ether1 data. It is part of the bridge and the bridge just forw...
by Egate
Tue Jul 10, 2012 2:50 pm
Forum: General
Topic: Multiple EOIP with bridge. How to split traffick.
Replies: 5
Views: 1791

Multiple EOIP with bridge. How to split traffick.

Hi. Have similar setup as EOIP setup example hear. http://wiki.mikrotik.com/wiki/Testwiki/Virtual_Private_Networks eoip.gif In example there is Mikrotik A and B. My setup include Mikrotik C, D and E. All linking back to Mikrotik A with Mikrotik A having a DHCP and also acting as gateway for all the ...
by Egate
Wed May 09, 2012 12:33 am
Forum: Wireless Networking
Topic: maximum transmission for two omnitik?
Replies: 9
Views: 1859

Re: maximum transmission for two omnitik?

Jip. Omnitik is in rural town and SXT is farm house next to town. Was suppose to be a grid dish, but dew to a mix-up, the technician installed the SXT. When we discovered the fault and wanted to fix it, the user was quite happy and preferred to keep it that way. If i have a look in the logs, there a...
by Egate
Sat May 05, 2012 10:21 pm
Forum: Wireless Networking
Topic: omni and 5 SXTMK
Replies: 1
Views: 536

Re: omni and 5 SXTMK

This is called routing. Chuck the bridge.
by Egate
Sat May 05, 2012 10:20 pm
Forum: Forwarding Protocols
Topic: Coexistence of RIP and OSPF: how to redistribute default
Replies: 1
Views: 2237

Re: Coexistense of RIP and OSPF: how to redistribute default

I run both RIP and OSPF on all my interfaces. OSPF will always be the preferred route, before RIP. Routing on RIP is set on never on every thing except for the router with the actual default route on it. This is set to always.
by Egate
Sat May 05, 2012 10:14 pm
Forum: Wireless Networking
Topic: Rf link for 40 kms
Replies: 8
Views: 1653

Re: Rf link for 40 kms

Most anything mikrotik equipment will do that bandwidth these days. The biggest problem that most people ignore is the Freshen zone. Mess with it and you will get a great signal , but horrible throughput. This was not calculated, bit of thump suck, but on 40 km you would need about 150m height on on...
by Egate
Sat May 05, 2012 9:57 pm
Forum: General
Topic: One router... two ADSL connections
Replies: 2
Views: 722

Re: One router... two ADSL connections

Google mikrotik one on one nat.
by Egate
Fri May 04, 2012 12:13 am
Forum: Wireless Networking
Topic: maximum transmission for two omnitik?
Replies: 9
Views: 1859

Re: maximum transmission for two omnitik?

Got a SXT connecting at -82 db to a OmniTik that is 11km away.
No, do not know the throughput. 8) Client needed 3 Mbs. Not a problem.
by Egate
Wed May 02, 2012 5:26 pm
Forum: General
Topic: Viewing address list in browser.
Replies: 2
Views: 361

Re: Viewing address list in browser.

Thanks. Something to keep me busy. :-)
by Egate
Tue May 01, 2012 9:16 pm
Forum: General
Topic: Forwarding RADIUS traffic to RADIUS server via VPN
Replies: 3
Views: 1360

Re: Forwarding RADIUS traffic to RADIUS server via VPN

Will try, but my very confusing. What you need to be sure of is that you could ping the radius from any of the ip's. Use tracert to see where problem happens. Would probably only be a routing problem, and most probably your radius that does not have the right routing info. As a test, add a rule in n...
by Egate
Tue May 01, 2012 9:05 pm
Forum: General
Topic: latency issues with mangle rules.
Replies: 2
Views: 1225

Re: latency issues with mangle rules.

Sorry, wanted to read, but my head heart. :-) The thing coming to mind is KISS. Keep it simple, don't mean to offend, will leaf that part. :) Looks to me like your data also gets confused and at the end end up using your default route if it exist. This usually cause the delays you talk about. First ...
by Egate
Tue May 01, 2012 8:33 pm
Forum: General
Topic: Help with load balancing
Replies: 6
Views: 1139

Re: Help with load balancing

Looks good.
by Egate
Tue May 01, 2012 10:25 am
Forum: General
Topic: Problem reaching other VLAN's from PPTP VPN Connection
Replies: 5
Views: 4133

Re: Problem reaching other VLAN's from PPTP VPN Connection

Then it would probably be a routing problem. In firewall/ nat, Masquerade using the Vlan as the incoming interface. Not the right way , but should eliminate routing problem.
by Egate
Tue May 01, 2012 10:03 am
Forum: General
Topic: Help with load balancing
Replies: 6
Views: 1139

Re: Help with load balancing

Sorry, thought i did include this. Have to use src address as classifier.
by Egate
Tue May 01, 2012 12:41 am
Forum: General
Topic: Problem reaching other VLAN's from PPTP VPN Connection
Replies: 5
Views: 4133

Re: Problem reaching other VLAN's from PPTP VPN Connection

Hi. Sorry, bit short on time to have a decent look, but maybe look at this http://blog.butchevans.com/2010/06/when ... proxy-arp/ sound like this might be your problem
by Egate
Tue May 01, 2012 12:24 am
Forum: Wireless Networking
Topic: How many clients can associated with a MikroTik AP?
Replies: 7
Views: 2128

Re: How many clients can associated with a MikroTik AP?

What i found, when using 802.11 the max users capable of using a AP is around 30, can push a bit more. With NV2 this increased dramatically and depending on the ping times you would probably be able to do 60 users, maybe a bit more. This is for normal WIFI usage. Multicast should eliminate the bandw...
by Egate
Tue May 01, 2012 12:12 am
Forum: General
Topic: Help with load balancing
Replies: 6
Views: 1139

Re: Help with load balancing

add chain=prerouting dst-address=192.168.2.0/24 action=accept in-interface=WAN-OUT add chain=prerouting dst-address=192.168.3.0/24 action=accept in-interface=WAN-OUT WAN-OUT will be your interface name and wont be the same. Perhaps WAN-OUT1 and WAN-OUT2. Now to the quiestion, prety much yes, exept ...
by Egate
Sun Apr 29, 2012 11:42 pm
Forum: Wireless Networking
Topic: maximum transmission for two omnitik?
Replies: 9
Views: 1859

Re: maximum transmission for two omnitik?

Nice, now try 10km. 8)
by Egate
Sun Apr 29, 2012 11:41 pm
Forum: Beginner Basics
Topic: About Queueing a new IP Pool Addresses
Replies: 3
Views: 836

Re: About Queueing a new IP Pool Addresses

After Test
i've got a new range 10.0.1.1-10.0.1.254
a new pc connected to the network and got 10.0.5.1
Does not seem as though new pc ip is from pool?
by Egate
Sun Apr 29, 2012 11:35 pm
Forum: Beginner Basics
Topic: High Definition Video Surviellance
Replies: 2
Views: 695

Re: High Definition Video Surviellance

Unfortunately, not a easy answer, to many variables. What i have found to be the biggest factor is processing power and Fresnel zone. With Fresnel, especially, any obstacle in the zone will have a perfect link strength, but horrible throughput on link.
by Egate
Sun Apr 29, 2012 11:22 pm
Forum: Beginner Basics
Topic: V5.8 and RB1100AH
Replies: 2
Views: 582

Re: V5.8 and RB1100AH

Have a look at www.mikrotik.com at the downloads. Have standard RB1100's with 5.6, very stable.
by Egate
Sun Apr 29, 2012 11:17 pm
Forum: General
Topic: Viewing address list in browser.
Replies: 2
Views: 361

Viewing address list in browser.

Is there any way to view address list in browser. As an example, lets assume a user is put in heavy download address list. I would like to publish it on a web server in order for the user to verify, whether he is shaped or limited or what ever the need may be. Anny suggestions would be appreciated.
by Egate
Thu Mar 29, 2012 12:20 pm
Forum: General
Topic: Policy route based on PCC and conn rate
Replies: 1
Views: 979

Re: Policy route based on PCC and conn rate

Hi. Found this old post of yours while searching for the best solution. Did you ever implement this? What i have been trying is to detect heavy user or downloader, especially on uncap users and move user to uncap ADSL lines and when user is not downloading any more, move them back to normal ADSL lin...
by Egate
Fri Mar 09, 2012 2:43 pm
Forum: Beginner Basics
Topic: Status page popup
Replies: 4
Views: 1281

Re: Status page popup

In hotspot, but most browsers block this these days beckase of pop up blocker.
by Egate
Fri Mar 09, 2012 2:41 pm
Forum: Beginner Basics
Topic: Internet access
Replies: 1
Views: 380

Re: Internet access

Set gateway of Wlan 3 as default gateway.
by Egate
Thu Mar 08, 2012 8:22 pm
Forum: Scripting
Topic: Red colour in simple queuse
Replies: 5
Views: 1468

Re: Red colour in simple queuse

Ok, never thought of it that way, thanks.
by Egate
Thu Mar 08, 2012 5:30 pm
Forum: Scripting
Topic: Red colour in simple queuse
Replies: 5
Views: 1468

Re: Red colour in simple queuse

Thanks for your response, but you miss understand. When the color change to red
76% - 100% available traffic used - red
there must be a bit set somewhere in a registry and i want to get the status of this and use this in a script
by Egate
Thu Mar 08, 2012 4:02 pm
Forum: Scripting
Topic: Red colour in simple queuse
Replies: 5
Views: 1468

Red colour in simple queuse

I want to sum how determine when a simple queues color change to red in a script. Can’t seem to find this anywhere. Anny suggestions?
by Egate
Thu Mar 08, 2012 3:58 pm
Forum: General
Topic: Rerouting without losing connection.
Replies: 1
Views: 368

Rerouting without losing connection.

What i am trying to accomplish is to make use of the connection bytes / connection rate function in the firewall to determine users downloading. This works fine. Then i want to move the users to another wan port, by changing their route. However if just changing it, things like emails and so forth g...
by Egate
Thu Mar 08, 2012 3:03 pm
Forum: Beginner Basics
Topic: Bandwidth quota for WAN's
Replies: 1
Views: 593

Re: Bandwidth quota for WAN's

Few ways. Use script to monitor data or maby make use of traffick monitor in tools to triger reachng the data. Next mark all traffick with connection mark and then routing mark. Create two routes using the routing mark to the diffrint gateways. Enabel route to firs used line and disable second one. ...
by Egate
Thu Mar 08, 2012 2:50 pm
Forum: Wireless Networking
Topic: Link aggregation work?
Replies: 1
Views: 693

Re: Link aggregation work?

How is WIFI bridge set up? Will probably have to use wds or bridge Ether and Wlan on each mikrotik.
by Egate
Thu Mar 08, 2012 2:44 pm
Forum: General
Topic: Simple queue does not have desired effect
Replies: 1
Views: 423

Re: Simple queue does not have desired effect

Guising you make use of masquirading. Google simple quies with masquirading. There is a wiki to address this.
by Egate
Thu Mar 08, 2012 2:41 pm
Forum: Beginner Basics
Topic: Remote radius
Replies: 1
Views: 424

Re: Remote radius

If you make use of hospot on mikrotik. Hotspot will try to use radius to authenticate user and if not possible will look at hotspot user.
by Egate
Mon Jan 02, 2012 11:08 am
Forum: Beginner Basics
Topic: help how to set up wan
Replies: 1
Views: 487

Re: help how to set up wan

Sounds like routing problem. The dirty way to fix this is to set nat rule with ether 1 as out interface and action as masquerade. Would be better to fix routing though.
by Egate
Mon Jan 02, 2012 11:04 am
Forum: General
Topic: masq with a /32 address?
Replies: 5
Views: 794

Re: masq with a /32 address?

In nat rule set out interface as lo0 and masquerade as action. Should do the trick.
by Egate
Thu Dec 08, 2011 7:34 pm
Forum: Beginner Basics
Topic: VLANs for Dummies
Replies: 14
Views: 5390

Re: VLANs for Dummies

Hi. Have a look at RB250. Small Vlan capable switch, probably designed for something like this..
by Egate
Tue Oct 04, 2011 5:20 pm
Forum: General
Topic: Mikrotik queue based on volume
Replies: 3
Views: 633

Re: Mikrotik queue based on volume

Just Google miKrotik scrips and you would find this. http://wiki.mikrotik.com/wiki/Scripts
by Egate
Mon Oct 03, 2011 2:22 pm
Forum: General
Topic: i can't open the yahoo page behind the mikrotik
Replies: 6
Views: 1466

Re: i can't open the yahoo page behind the mikrotik

Found that some sites, in my case Adope have ip range that is routed back into my lan. Resolved this by adding statick route in my routing table. Maby do trace route to mail server and see if traffick is routed correct.
by Egate
Mon Oct 03, 2011 2:15 pm
Forum: Beginner Basics
Topic: remote access
Replies: 9
Views: 1057

Re: remote access

Sounds like routing problem. Can you ping the ip?
by Egate
Thu Sep 29, 2011 4:14 pm
Forum: Wireless Networking
Topic: PPPoE with day night bandwidth limits
Replies: 3
Views: 1086

Re: PPPoE with day night bandwidth limits

Would be even better, that way you also lighten the load on your network since traffic is limited before it reach your backbone. Just a bit more logistically intense, you would have to access each cpe and put code on it and also if you want to change any thing, it might become a shlep.
by Egate
Thu Sep 29, 2011 4:04 pm
Forum: General
Topic: problem with routes and 2 pppoe on same gateway
Replies: 4
Views: 755

Re: problem with routes and 2 pppoe on same gateway

Remove this. add action=mark-connection chain=output disabled=no new-connection-mark=pppoe-out1_conn passthrough=yes per-connection-classifier=both-addresses:3/0 add action=mark-connection chain=output disabled=no new-connection-mark=pppoe-out2_conn passthrough=yes per-connection-classifier=both-add...
by Egate
Thu Sep 29, 2011 3:46 pm
Forum: Wireless Networking
Topic: Dual Backhaul Mesh
Replies: 1
Views: 388

Re: Dual Backhaul Mesh

Sounds so familiar. :) Maybe this will help. Haven't rely played with mesh that much but have been toying with something similar where you make use of OSPF to route TX data on one channel and RX on the other channel and if one should go down the one still up, will run all the traffic. Somebody did w...
by Egate
Thu Sep 29, 2011 3:29 pm
Forum: General
Topic: problem with routes and 2 pppoe on same gateway
Replies: 4
Views: 755

Re: problem with routes and 2 pppoe on same gateway

Did nor see your ppp configuration hear, but sounds to me as though you default routes is enabled in PPPoE client. Disable them and create a default route manual and see what happens.
by Egate
Thu Sep 29, 2011 3:16 pm
Forum: Beginner Basics
Topic: Simple antenna vs antenna questions
Replies: 1
Views: 606

Re: Simple antenna vs antenna questions

1. Between two 5.4Ghz GRID parabola antennas with both having 21dBi gain the better antenna is the one with bigger grid? Does the fact that they both have 21dBi gain make them comparable in performance? Exactly, same gain means exactly that, will get exactly the same signal strength, no matter how ...
by Egate
Thu Sep 29, 2011 3:06 pm
Forum: General
Topic: Mikrotik queue based on volume
Replies: 3
Views: 633

Re: Mikrotik queue based on volume

Just have a look at mikrotik scrip's. Somebody already wrote a scrip to do exactly that.
by Egate
Thu Sep 29, 2011 2:49 pm
Forum: Beginner Basics
Topic: Transparent bridge using SXT-5hnd
Replies: 4
Views: 2531

Re: Transparent bridge using SXT-5hnd

You don't need to use WDS, that said, yes, if you use bridge, any interface you want be in bridge should be added as port for the bridge.
by Egate
Thu Sep 29, 2011 9:00 am
Forum: General
Topic: What's the best way to connect a load balancer and a shapper
Replies: 3
Views: 732

Re: What's the best way to connect a load balancer and a sha

The problem would have been if you used scr-address, this would appear to the load balancer as though all traffic was from the same ip and all port 80 traffic would go through the same ADSL line Load balancing should be ok with both address. If you put proxy before limiter you would have a problem i...
by Egate
Wed Sep 28, 2011 9:11 pm
Forum: Beginner Basics
Topic: Bridging of two ISP lines from Mikrotik to router behind
Replies: 1
Views: 693

Re: Bridging of two ISP lines from Mikrotik to router behind

Since this is mikrotik, there is a few ways to accomplish this. :) First of i read bridge, but think, probably routed. If this is the case you would set two default gateways in your mikrotik. The primary route with distance set lower than secondary and also check gateway enabled on both. If primary ...
by Egate
Wed Sep 28, 2011 8:58 pm
Forum: Wireless Networking
Topic: PPPoE with day night bandwidth limits
Replies: 3
Views: 1086

Re: PPPoE with day night bandwidth limits

Could just use simple queues as suggested on you concentrator and disable bandwidth control on your pppoe. Unfortunately you would have to create queue for each pppoe.
by Egate
Wed Sep 28, 2011 8:52 pm
Forum: General
Topic: 5 AP coenction
Replies: 1
Views: 343

Re: 5 AP coenction

Would suggest you put two radio cards on 433. One set up as station and one set up as AP. Just connect the station to next AP or even better all to central AP. No sweat. 8)
by Egate
Wed Sep 28, 2011 8:45 pm
Forum: General
Topic: Routing when more IP addresses assigned to WAN port
Replies: 1
Views: 491

Re: Routing when more IP addresses assigned to WAN port

Don't nat each lan just masquerade the data exiting the wan and see what happens.
by Egate
Wed Sep 28, 2011 8:41 pm
Forum: Wireless Networking
Topic: Wireless clients can not access each other
Replies: 1
Views: 435

Re: Wireless clients can not access each other

Sounds to me like a routing problem. Quick fix would be to put interfaces into a bridge, but don't, and i repeat. Don't use it permanent. Routing is the way to go and to get from a bridge network to a routed network is a shlep.
by Egate
Wed Sep 28, 2011 8:24 pm
Forum: General
Topic: What's the best way to connect a load balancer and a shapper
Replies: 3
Views: 732

Re: What's the best way to connect a load balancer and a sha

Just a quick question. Are you using src-address as qualifier in your load balancing?
by Egate
Wed Sep 28, 2011 8:20 pm
Forum: General
Topic: Bridge priority question
Replies: 1
Views: 1256

Re: Bridge priority question

You do understand that a bridge just retransmit all data it receives, including windows data? This will kill your network in no time if it starts expanding a bit. You should seriously look into routing your traffic. From your diagram, by the way, nice diagram, :) it appears it will take some work to...
by Egate
Wed Sep 28, 2011 8:11 pm
Forum: General
Topic: hotspot and problem with android mobile
Replies: 3
Views: 3209

Re: hotspot and problem with android mobile

Just some ideas to get to problem. Try disabling popup blocker and also put ip of hotspot in browser and see what happens.
by Egate
Wed Sep 28, 2011 8:08 pm
Forum: Forwarding Protocols
Topic: outgoing port
Replies: 1
Views: 668

Re: outgoing port

Firewall wont block any thing unless you tel it to. Maybe you are natting something?
by Egate
Wed Sep 28, 2011 8:06 pm
Forum: General
Topic: Wireless question
Replies: 1
Views: 357

Re: Wireless question

Most of the time it is a hardware problem, CPU just max out before you reach that speeds.
by Egate
Wed Sep 28, 2011 8:05 pm
Forum: General
Topic: sxt 5hnd upgrading
Replies: 2
Views: 1271

Re: sxt 5hnd upgrading

Had something similar. Made use of netinstall and re installed 5.5. This fixed the problem. Might work for you as well.
by Egate
Tue Sep 20, 2011 12:25 pm
Forum: General
Topic: VLan help or ideas.
Replies: 4
Views: 586

Re: VLan help or ideas.

Hi Fewi. Thanks for the reply. Did not post any rules on Router 1, because at this time there is nothing on it except for the ip on lan going to router 2. That said, appears i got it to function with this rule. ip rout rule print Flags: X - disabled, I - inactive 0 dst-address=193.168.125.0/24 actio...
by Egate
Mon Sep 19, 2011 10:37 pm
Forum: General
Topic: VLan help or ideas.
Replies: 4
Views: 586

Re: VLan help or ideas.

Hi Fewi. Thanks for the response. Would just like to try and figure why this is not working. I striped it down to the very basic. If i can get this running the rest should just be copy and paste. Attached a schematic. I created two PPPoE client on router 2 connecting through the Vlans and the respec...
by Egate
Sun Sep 18, 2011 10:57 pm
Forum: General
Topic: VLan help or ideas.
Replies: 4
Views: 586

VLan help or ideas.

Hi. Spend my weekend to try and fix this. :shock: Time to ask the big guns for help. :) As a test i have got a mikrotik router_1 connecting to another mikrotik router_2 on Ether 1. Ether2 on router_2 is connected to a switch. On this connection i have added 4 Vlans going to the switch in turn, conne...
by Egate
Wed Sep 14, 2011 12:02 am
Forum: General
Topic: Vlan with Websmart Plannet switch.
Replies: 7
Views: 2245

Re: Vlan with Websmart Plannet switch.

Thanks for response. Had only one more problem. The default PVID of port 16 is 1, which is the default of the default VLan. This killed the connection. Changed PVID of port 16 to VID of Vlan 1 , this functioned , but VLAN2 that is suppose to make use of modem on port 2 also made connection through m...
by Egate
Tue Sep 13, 2011 10:56 pm
Forum: General
Topic: Vlan with Websmart Plannet switch.
Replies: 7
Views: 2245

Re: Vlan with Websmart Plannet switch.

Thanks for the reply. Jip, did test it, actual just deleted Vlan10 on switch and placed all ports untagged in the default group. Had to remove the cabel from port 23 with which i interface onto the switch, before the PPPoE made a connection. Switch info. http://www.planet.com.tw/en/product/product_o...
by Egate
Tue Sep 13, 2011 8:15 pm
Forum: General
Topic: Vlan with Websmart Plannet switch.
Replies: 7
Views: 2245

Re: Vlan with Websmart Plannet switch.

Thanks for the reply. Is connected to VLan. The setings as requisted. /interface print detail Flags: D - dynamic, X - disabled, R - running, S - slave 0 R name="ether1" type="ether" mtu=1500 l2mtu=1526 max-l2mtu=1526 1 R name="ether2" type="ether" mtu=1500 l2mtu=1522 max-l2mtu=1522 2 name="ether3" t...
by Egate
Mon Sep 12, 2011 11:08 pm
Forum: Beginner Basics
Topic: Transparent bridge using SXT-5hnd
Replies: 4
Views: 2531

Re: Transparent bridge using SXT-5hnd

It is all about routing. You could also create bridge with ether 1 and Wlan 1 as ports of the bridge. This must be done on both SXT. This will create transparent bridge, functioning similar to a lan cable, however, routing is the way to go if you ever want to use this for more than just a simple link.
by Egate
Mon Sep 12, 2011 11:02 pm
Forum: Beginner Basics
Topic: Multi-Wan - Public Network
Replies: 1
Views: 504

Re: Multi-Wan - Public Network

What is the function of the netgear?
by Egate
Mon Sep 12, 2011 10:55 pm
Forum: General
Topic: How can I configure this on my router
Replies: 1
Views: 702

Re: How can I configure this on my router

What do you want to use the mikrotik for?
by Egate
Mon Sep 12, 2011 10:50 pm
Forum: General
Topic: Vlan with Websmart Plannet switch.
Replies: 7
Views: 2245

Vlan with Websmart Plannet switch.

Want to set up a PPPoE client on mikrotik to connect through with Vlan through Ether1 connecting to a Planet switch Port1 and part of the Vlan group on switch is Port2 connecting to a ADSL modem without Vlan capability. Is this possible, maybe with another make of switch? My setup is Vlan1 with ID 5...
by Egate
Tue Jul 26, 2011 1:00 pm
Forum: Forwarding Protocols
Topic: Merge 2 DSL Lines and Give High Speed to your clients
Replies: 29
Views: 27392

Re: Merge 2 DSL Lines and Give High Speed to your clients

However if you want to force MT to use one link more then other, for example WAN4, you can add more PCC lines but assigning the same two marks to a specific link , something like Thanks for reply. Have actually got a setup with 8 lines balanced using PCC, understand what you say. If you have a look...
by Egate
Mon Jul 25, 2011 9:57 am
Forum: Forwarding Protocols
Topic: Merge 2 DSL Lines and Give High Speed to your clients
Replies: 29
Views: 27392

Re: Merge 2 DSL Lines and Give High Speed to your clients

Reed the posts. aacable gave you a ling http://aacable.wordpress.com/2011/06/04 ... t-by-zaib/ with his setup and you could search the wiki for PCC sharing.
by Egate
Mon Jul 25, 2011 9:51 am
Forum: Forwarding Protocols
Topic: mesh within 2 EoIP tunnel (failover szenario)
Replies: 3
Views: 1600

Re: mesh within 2 EoIP tunnel (failover szenario)

If you want redundant, you will have to install more RB, maybe RB3 and RB4. Does not help to have two PPPoE links on same router board. If RB1 or RB2 get problem it will influence both PPPoE tunnels.
by Egate
Sat Jul 23, 2011 10:38 pm
Forum: General
Topic: Help Multiple Gateway
Replies: 1
Views: 553

Re: Help Multiple Gateway

Looks to me like your problem is your data does not access the way it entered. Try something like this in ip mangle. add action=mark-connection chain=prerouting comment=\ "Mark connections Wan1" disabled=no in-interface=\ "Wan 1" new-connection-mark=Wan1_in_conn passthrough=yes add action=mark-routi...
by Egate
Sat Jul 23, 2011 10:29 pm
Forum: General
Topic: Get access to login/status page of hotspot's user from WAN
Replies: 5
Views: 1056

Re: Get access to login/status page of hotspot's user from W

Probably the lan? Wan normally interne side.
by Egate
Sat Jul 23, 2011 10:27 pm
Forum: Wireless Networking
Topic: wireless repeater?
Replies: 1
Views: 570

Re: wireless repeater?

Best way would be to set one Wlan as AP and link with other Wlan to Dlink.
by Egate
Sat Jul 23, 2011 10:25 pm
Forum: Wireless Networking
Topic: Need help with a 100 clients network
Replies: 1
Views: 591

Re: Need help with a 100 clients network

Best config for a pair of mikrotiks to do a dedicated (transparent, no firewall, no routing) bridge. Nstreme avalaible. WDS bridge with your lan. Best config for a sectorial station (ap bridged?) with all the clients in station mode. Tis is exactley right. AP bridge and clients station. Any special...
by Egate
Fri Jul 22, 2011 2:30 pm
Forum: Forwarding Protocols
Topic: Merge 2 DSL Lines and Give High Speed to your clients
Replies: 29
Views: 27392

Re: Merge 2 DSL Lines and Give High Speed to your clients

Thanks aacable, maybe put it as a WIKI as well. Great writeup. Have you ever tried different setups to get the balancing more even. With this set up you always get that one or two lines would use much more data than the other once, or maybe one line would be congested while nothing happens on the ot...
by Egate
Thu Jul 21, 2011 5:20 pm
Forum: The User Manager
Topic: Wanted: UM scripter for hire...
Replies: 8
Views: 1715

Re: Wanted: UM scripter for hire...

Was hoping to make the RB solution all inclusive so I can replicate with other projects and minimal equipment purchase (and transportation, can be VERY tricky here...) This is a once of. You will have the radius on one site with a public ip assigned to it and all your other sites can use this same ...
by Egate
Wed Jul 20, 2011 11:26 pm
Forum: General
Topic: Queue Help
Replies: 17
Views: 2508

Re: Queue Help

Just a question if i may. Why use a hotspot at all if it is open? By the way, very nice setup fewi.
by Egate
Wed Jul 20, 2011 9:49 pm
Forum: Wireless Networking
Topic: Mikrotik with Sectors and P2P connection
Replies: 5
Views: 1065

Re: Mikrotik with Sectors and P2P connection

Have got some RB433AH as AP with 19db sector and users with standard SXT up to 7km, from 10km i like to start installing grid dish, but i am sure you will do 10 km easily if you have got clear line of sight. Do 2 Meg no sweat, with speed test around 12 M/s. Buzz y changing the sectors on AP to MIMO ...
by Egate
Wed Jul 20, 2011 9:29 pm
Forum: Beginner Basics
Topic: Please Help
Replies: 5
Views: 756

Re: Please Help

Have you connected a PC strait into Vsat router without the MT and test?
by Egate
Wed Jul 20, 2011 9:27 pm
Forum: General
Topic: Queue Help
Replies: 17
Views: 2508

Re: Queue Help

Not 100% sure but would say the global data would be 1Meg. If you have a look at hotspot users, this function is also there, but this is just for the specific user. The better way to accomplish this though is with simple queues of which there is tons of examples. Hotspot actual creates this dynamica...
by Egate
Wed Jul 20, 2011 9:21 pm
Forum: General
Topic: mikrotik v 5.4 rb750
Replies: 4
Views: 1025

Re: mikrotik v 5.4 rb750

Yes. Will also work. Will create your default gateway dynamic upon connection. The other way is static, which i thought you wanted to do because you did your DNS that way.
use-peer-dns=no
Could be yes. This will update your DNS from PPPoe connection.
by Egate
Wed Jul 20, 2011 4:24 pm
Forum: Beginner Basics
Topic: Please Help
Replies: 5
Views: 756

Re: Please Help

Another question. You guise don't do any specific kind of connection routing, or is it standard, like default route and that is it?
by Egate
Wed Jul 20, 2011 4:18 pm
Forum: Wireless Networking
Topic: Bandwidth estimate for links
Replies: 6
Views: 1258

Re: Bandwidth estimate for links

Thanks.
by Egate
Wed Jul 20, 2011 12:50 pm
Forum: General
Topic: disconnected with internet
Replies: 3
Views: 569

Re: disconnected with internet

Where is the omni connected to?
by Egate
Wed Jul 20, 2011 12:28 am
Forum: The Dude
Topic: change of IP - where to change this in THE DUDE?
Replies: 8
Views: 2702

Re: change of IP - where to change this in THE DUDE?

It is all about routing. If your routing is correct and you can ping to the Ap from you and from you to the AP, Dude should function correct.
by Egate
Wed Jul 20, 2011 12:26 am
Forum: Beginner Basics
Topic: how to allow yahoo messenger in walled garden
Replies: 2
Views: 1222

Re: how to allow yahoo messenger in walled garden

Just add it in Walled Garden. Just choose allow and for dst. Host put www.yahoo.com. This will allow access to yahoo even if not authorized in hotspot.
by Egate
Wed Jul 20, 2011 12:19 am
Forum: General
Topic: disconnected with internet
Replies: 3
Views: 569

Re: disconnected with internet

Where is the omni connected to? Which interface is your hotspot on?
by Egate
Wed Jul 20, 2011 12:13 am
Forum: Wireless Networking
Topic: Bandwidth estimate for links
Replies: 6
Views: 1258

Re: Bandwidth estimate for links

Sorry, not rely answering your question, but what program did you use to plot this? What i can confirm though is that it appears that your Franzen might be interfered with and usually what i found on this long links is that if that happens, you get a perfect signal, but as soon as you start pulling ...
by Egate
Wed Jul 20, 2011 12:06 am
Forum: Beginner Basics
Topic: Need Help for Routing
Replies: 2
Views: 592

Re: Need Help for Routing

Do they still need to log in, guessing not. In winbox go to IP - Hotspot - Wallet Garden IP List and add a rule with 192.168.4.0/24 s the Dst-Address
by Egate
Wed Jul 20, 2011 12:02 am
Forum: Beginner Basics
Topic: Please Help
Replies: 5
Views: 756

Re: Please Help

What kind of routing do u use? Statck, RIP, OSPF?
by Egate
Wed Jul 20, 2011 12:00 am
Forum: The User Manager
Topic: Wanted: UM scripter for hire...
Replies: 8
Views: 1715

Re: Wanted: UM scripter for hire...

I am willing to take your money. 8) Just joking, what you need is a radius server. Does all the things you need and you can remotely axxess it and add, disable and so forth. Have a look at http://www.dmasoftlab.com They are reasonably priced and Viktor at support is exceptionally help full. If i onl...
by Egate
Tue Jul 19, 2011 11:50 pm
Forum: General
Topic: mikrotik v 5.4 rb750
Replies: 4
Views: 1025

Re: mikrotik v 5.4 rb750

I am guessing your PPPoE actually does connect? Also give it a name default usually PPPoE1 or something. The problem is you don't have a default route. Add this and see what happens. add check-gateway=ping comment="Default Route" disabled=no distance=1 \ dst-address=0.0.0.0/0 gateway="PPPoE1" scope=...
by Egate
Tue Jul 19, 2011 11:33 pm
Forum: Wireless Networking
Topic: how many station-wds ?
Replies: 1
Views: 406

Re: how many station-wds ?

Would really repent on the equipment used and most of all CPU and this is directly proportional to the bandwidth you want to use. The more bandwidth the more CPU power.
by Egate
Tue Jul 19, 2011 12:16 am
Forum: Wireless Networking
Topic: Mikrotik with Sectors and P2P connection
Replies: 5
Views: 1065

Re: Mikrotik with Sectors and P2P connection

Sorry cant confirm, what i can tell you is that stronger is not better, had huge problems with interference with that attitude, when i started this game. You get all kinds of problems, sometimes you do much better going weaker. As an example, i have a few 19db, 120 deg sectors with R52Hn cards on 50...
by Egate
Mon Jul 18, 2011 4:41 pm
Forum: General
Topic: problem using a forum with pcc load balance
Replies: 27
Views: 4561

Re: problem using a forum with pcc load balance

I have modem-router and I look for away to put them in bridge mode. This will be a setting on the modem-router itself. should I replace 192.168.9.168 with pppoe-out1 interface Yes in the following rules. add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.9.168 routi...
by Egate
Mon Jul 18, 2011 4:31 pm
Forum: Wireless Networking
Topic: Configuration
Replies: 9
Views: 1117

Re: Configuration

Routing is always better. When small it does not matter that much, but to change from bridging to routing is a big problem and will eventually have to happen. Better to start with routing and just keep going. For the client 10.10.2.3 to get to server 10.10.1.1, he will have to go through AP 10.10.2....
by Egate
Sun Jul 17, 2011 9:03 pm
Forum: Wireless Networking
Topic: Configuration
Replies: 9
Views: 1117

Re: Configuration

All equipment.
by Egate
Sun Jul 17, 2011 5:00 pm
Forum: Wireless Networking
Topic: Configuration
Replies: 9
Views: 1117

Re: Configuration

Sorry, routing most basic of any network. Google routing and setting up routes many nice examples. Bit to time consuming to try and teach any body especially if it is on net already. My email is mla at egate.co.za but would prefer we discuss on forum. Somebody else maybe one day get problem with som...
by Egate
Sun Jul 17, 2011 2:48 pm
Forum: Beginner Basics
Topic: help in mikrotik
Replies: 3
Views: 589

Re: help in mikrotik

Rules will look something like this. add action=dst-nat chain=dstnat comment="RB 1" \ disabled=no dst-port=90 in-interface="Ether2" protocol=tcp to-addresses=\ "wan-static-ip" to-ports="HTTP port configured on RB2" add action=src-nat chain=srcnat comment="From RB2" \ disabled=no protocol=tcp src-add...
by Egate
Sun Jul 17, 2011 2:35 pm
Forum: Wireless Networking
Topic: Wireless nv2, disconnections, low ccq, low modulation...
Replies: 12
Views: 1782

Re: Wireless nv2, disconnections, low ccq, low modulation...

Have got a few long range links using R52Hn with dual ink, starting from around 20km to around 47 km. Haven't noticed any of the problems mentioned, except for one link that sometimes disconnect at night. We believe the cause to be interference from near by spot lights. Nothing that requires my atte...
by Egate
Sun Jul 17, 2011 11:10 am
Forum: Wireless Networking
Topic: Suggestion for p2p dish & sector for MT R52a setup
Replies: 3
Views: 796

Re: Suggestion for p2p dish & sector for MT R52a setup

Have a look at L2 MTU or as Ubuntu guise like to say, "JUMBO FRAMES" :) RB411 can do up to 2290 on wireless side but only up to 1526 on Ethernet.
by Egate
Sun Jul 17, 2011 10:58 am
Forum: Wireless Networking
Topic: Configuration
Replies: 9
Views: 1117

Re: Configuration

Best way to do this is to take out the bridge. You will then be using pure routing, which is the most efficient way to do this. Will have to give each panel and segment its own ip range for routing to function. Something like 10.10.10.1/24 and 10.10.20.1/24 and so forth, with clients pointing to a s...
by Egate
Sun Jul 17, 2011 10:51 am
Forum: General
Topic: problem using a forum with pcc load balance
Replies: 27
Views: 4561

Re: problem using a forum with pcc load balance

If you put ADSL modem in bridge mode and make PPPoE connection with mikrotik, through the modem, this will solve this. Make use off PPPoE instead of Ether. Will also just have to Nat the PPPoE connection on Mikrotik, since ADSL modem wont do it in bridge mode.
by Egate
Sun Jul 17, 2011 10:44 am
Forum: Wireless Networking
Topic: Slow transparent bridging
Replies: 5
Views: 1156

Re: Slow transparent bridging

Was asking about PC because i know some of the newer Windows have limitations on amount of connections and so forth. As far as i know, Xp good though. If your MTU for Wlan and Ether is both 1500 there should not be fragmentation problems.
by Egate
Sun Jul 17, 2011 1:39 am
Forum: Scripting
Topic: ppp active script
Replies: 1
Views: 583

Re: ppp active script

Search the mikrotik WKI for scrips. There is a bunch of scripts that does reporting and so forth.
by Egate
Sun Jul 17, 2011 1:37 am
Forum: Wireless Networking
Topic: Suggestion for p2p dish & sector for MT R52a setup
Replies: 3
Views: 796

Re: Suggestion for p2p dish & sector for MT R52a setup

Mikrotik works just fine with the UB dishes and aerials. Aerials and dishes is designed for a curtain frequency and wattage and as such any maker of radio equipment will function, as long as they are in range of the designed frequency and watts.
by Egate
Sun Jul 17, 2011 1:34 am
Forum: Wireless Networking
Topic: Configuration
Replies: 9
Views: 1117

Re: Configuration

If you wish for all data to be re transmitted to all wlans, this should work.
Is the configuration is right ?
There is so many right configurations, depends on what you want to do.
by Egate
Sun Jul 17, 2011 1:30 am
Forum: Beginner Basics
Topic: help in mikrotik
Replies: 3
Views: 589

Re: help in mikrotik

Make use of NAT routing different ports to your different boards. Something like this. /ip firewall nat add action=dst-nat chain=dstnat comment="RB 1" \ disabled=no dst-port=90 in-interface="Ether2" protocol=tcp to-addresses=\ 192.168.100.10 to-ports=80 Of cause substitute your naming. With this if ...
by Egate
Sun Jul 17, 2011 1:18 am
Forum: General
Topic: which one is the best ?
Replies: 1
Views: 921

Re: which one is the best ?

Unless you wand to supply a small country with internet, none. All of them is much to big. 8)
by Egate
Sun Jul 17, 2011 1:17 am
Forum: General
Topic: Queue Help
Replies: 17
Views: 2508

Re: Queue Help

Please search in mikrotik WIKI for bandwidth control. Lots of examples there.
by Egate
Sun Jul 17, 2011 1:16 am
Forum: General
Topic: cant Access internet through 450G FOr some customers
Replies: 1
Views: 672

Re: cant Access internet through 450G FOr some customers

Sounds like routing problem. When klient have the problem again, see if you can trace route from client router board to your server and the other way round.
by Egate
Sun Jul 17, 2011 1:12 am
Forum: RouterBOARD hardware
Topic: problem with 411 lan
Replies: 1
Views: 536

Re: problem with 411 lan

Sorry, probably not. Replace board.
by Egate
Sun Jul 17, 2011 1:11 am
Forum: Wireless Networking
Topic: Question using Mesh WDS as a dynamic hotspot Wifi repeater.
Replies: 1
Views: 635

Re: Question using Mesh WDS as a dynamic hotspot Wifi repeat

Sounds like a routing problem to me. Your gateway probably does not have a route to your WIFI clients ip.
by Egate
Sun Jul 17, 2011 12:45 am
Forum: Wireless Networking
Topic: Mikrotik with Sectors and P2P connection
Replies: 5
Views: 1065

Re: Mikrotik with Sectors and P2P connection

Some one suggest me to use 5 PCI slot motherboard Bit of a overkill for 15 users with mikrotik, rather use one of the 433 rage router boards. 1. is mikrotik will handle more users and solve my issue of bullets m2hp? (Like slow browsing to users after 15) Mikrotik introduced a while back a protocol ...
by Egate
Sun Jul 17, 2011 12:32 am
Forum: Wireless Networking
Topic: Slow transparent bridging
Replies: 5
Views: 1156

Re: Slow transparent bridging

The host-to-host test in same conditions drops to a 9Mbps.
With what do you test from host to host (program)? I am guessing it is two PC's, what operating system do they have?
by Egate
Sun Jul 17, 2011 12:26 am
Forum: Forwarding Protocols
Topic: mesh within 2 EoIP tunnel (failover szenario)
Replies: 3
Views: 1600

Re: mesh within 2 EoIP tunnel (failover szenario)

Maybe i miss understand. You have a router board (RB1) connecting to another router (RB2) with EOIP (1) and you add another EOIP (2) tunnel from the same RB1 connecting to RB2 as fail over?
by Egate
Sun Jul 17, 2011 12:21 am
Forum: Wireless Networking
Topic: Can I connect 4 Sites with one Link
Replies: 1
Views: 523

Re: Can I connect 4 Sites with one Link

Sounds like a standard PCC load balancing with scrs-address as classifier should work. Have a look at the WIKI there is a PCC example that works.
by Egate
Sun Jul 17, 2011 12:12 am
Forum: Wireless Networking
Topic: Wireless nv2, disconnections, low ccq, low modulation...
Replies: 12
Views: 1782

Re: Wireless nv2, disconnections, low ccq, low modulation...

radio module ubiquiti dual chain
Have u tried to use a R52Hn?
by Egate
Sat Jul 16, 2011 10:28 pm
Forum: General
Topic: PPtP keeps disconnecting
Replies: 15
Views: 17706

Re: PPtP keeps disconnecting

Sorry that's about as far as i can assist. Have used PPTP internal and few times to service providers on the net, never had any problem, except with the encryption.
by Egate
Sat Jul 16, 2011 10:26 pm
Forum: General
Topic: problem using a forum with pcc load balance
Replies: 27
Views: 4561

Re: problem using a forum with pcc load balance

Nope. This is for your default route. No influence on PCC route used. however all router data, like DNS and data not router marked, will only go through default route 192.168.9.168 unless it should go down for some reason, then the alternative will be used.
by Egate
Thu Jul 14, 2011 7:46 pm
Forum: Beginner Basics
Topic: Trouble configuring mikrotik for internet access (newbie)
Replies: 6
Views: 966

Re: Trouble configuring mikrotik for internet access (newbie

Status of ppoe is connected Then your modem is in bridge mode. Basically it blindly passes data from the lan side to ADSL side and back allowing mikrotik to make the PPPoE connection. AKA "Bridged." See if you can ping from the mikrotik to internet. First with something like http://www.google.com ,...
by Egate
Wed Jul 13, 2011 10:51 pm
Forum: General
Topic: EoIP RSTP / Bonding
Replies: 2
Views: 1214

Re: EoIP RSTP / Bonding

Create two default routes giving one a bigger distance and assign check gateway with check ping. This will route traffic through the route with lower distance and if it should fall over traffic wilt be routed out the second route.
by Egate
Wed Jul 13, 2011 10:46 pm
Forum: Wireless Networking
Topic: WDS SETUP
Replies: 1
Views: 497

Re: WDS SETUP

Wds wont fix interference, rather change radio frequency.
by Egate
Tue Jul 12, 2011 10:00 pm
Forum: Wireless Networking
Topic: interference problem need help
Replies: 1
Views: 1111

Re: interference problem need help

Have a look at this and search DFS on forum for more info.
http://forum.mikrotik.com/viewtopic.php?f=7&t=23914
by Egate
Tue Jul 12, 2011 9:55 pm
Forum: Beginner Basics
Topic: simple WLAN client not getting IP
Replies: 1
Views: 505

Re: simple WLAN client not getting IP

If the link shows it is up, then there is no problem with security connection and if you set the dhcp client on the Wlan and does not get a ip, then the problem is probably on the AP point side.
  • 1
  • 2