MikroTik

sytex

I'm trying to create an IPv6 firewall rule list into a router, and found some strange thing in the input chain: Input: /ipv6 firewall address-list add address=2001:db8:4::/48 list="Allowed Management V6" /ipv6 firewall filter add action=accept chain=input comment="Allow Management Fro...

sytex

https://youtu.be/Ts5JRlw47FE

LHG 60G Test Video

sytex

The backup file does not contains the additional installed packages. And there is no method for what you want. Officialy, the backup file can be restored on the same device, where it was created. If you want to move config from one device to an another, you have to use the script file, which is crea...

sytex

Also the same issue here... cannot get VLANs working properly

sytex

We got some new 260GSP-s.

On the box label there is 260GSP and Type: CSS106-1G-4P-1S
It came with SWOS 2.0 as default.
Can we found somewhere the downloadable FW for this?
Is there a changelog somewhere?
What are the main differencies?

sytex

Slawek,

Right now I am on business trip, and cannot access the router. I will post it next week.

sytex

Equal priority, max-limit set on each subchain to the same as global max-limit, and some limit-at parameters depends on needed priority (LAN1 20Mbit, LAN2 40Mbit, LAN3 40Mbit) worked for me.

Thanks for the advices.

sytex

LAN3 is not set yet, because I'm testing it with two clients. Again: I don't want to set exact max-limits per subnet (I can make that with simple queues, and don't need the queue tree). My goal: LAN1 lowest priority but guaranteed 2M down, 1M up LAN2 middle priority but guaranteed 4M down, 2M up LAN...

sytex

Thanks for the answers, and advices. Now I'm stuck at the queue tree setup, I made this config: /ip firewall mangle add action=mark-connection chain=prerouting comment=con_LAN1 connection-mark=no-mark in-interface=LAN1 new-connection-mark=conn_LAN1 passthrough=no add action=mark-connection chain=pre...

sytex

Thanks for the answers. I will try them,

Answers to @slv:

Yes I have bridges, so the 3 'LAN' interfaces are bridges in my setup.
I use masquerade.

sytex

Hi All, I'm trying to make a (simple?) config. RB has 1 uplink port, and has 3 private ports with separated ip subnets. I have to make a masquerading router to internet, which proiritizes the upload and download between the 3 subnets. I googled a lot, but could not find any solution for this. The co...

sytex

tool_winbox.jpg

...and copy winbox exe to c:\

sytex

Thank you Normis!

sytex

RB433, RoS v3.30.
After pressing the Update Licence Key button, the Upgradable to disaperas. (See attached picture)

Allready rebooted, upgraded to 4.17, but still empty.

Can I upgrade further? Two boards made this today, and we have 6 more (433, 600, PC) which I need to upgrade.

sytex

foto.JPG

sytex

RB2011L after upgrading to 6.4 and making a /system reset-configuration If I plug to eth1, the LED nr. 6 goes on. eth2-5: LED OK eth 6-10: no link There is no default IP (88.1) on any interface. Winbox's (...) button doesn't work on any interface. Someone, ideas? EDIT: After some further testing: If...

sytex

Hi! I'm trying to set up a config, in a CCR running ROSv6. It has 1 gateway interface, and multiple inside interfaces. One bridge for office users, one vlan (on the bridge) for guest users. I try to set up a queue tree, which grants guaranteed download bandwidth for office users (CIR - limit at), if...

sytex

I really cannot figure out... sorry. It must be Atlas or Wavearena.

sytex

Yes The sector antenna

Sorry for the late answer:

***DELETED*** I cannot find the antenna type in our system... need more time to figure out, which antennas we used on the site.

sytex

Reset the router, or use serial cable.

sytex

i like the guy in the second picture
i think he did somethig wrong

Thats me, I had a terrible headache that day.

sytex

Don't delete the bridge!!!

Leave them bridged together, and use Bridge Filters. I haven't used bridge filter many years ago, so I cannot give you the exact solution.

sytex

Are the three interfaces bridged together or is there routing between the interfaces (different ip ranges on each)?

sytex

Tick this off in l2tp client interface:

sytex

Are you sure, the traffic is really stopping for a moment??

I can see this graph "leak" on my very far devices too, but the traffic is not missing any packet, only the graph.

sytex

I think you only see it, when this SSID is set in the cilent/CPE device.

sytex

If the server IP is a private ip (eg: 192.168.X.X, 10.X.X.X, 172.X.X.X), than this is the correct way.

sytex

Tömszelence with sziloplaszt

Almost....

(Majdnem, tömszelence talált, a több nem, következő tipp?)

For english users: tömszelence= a plastic thing, with this you can bring cables in/out from a metal case waterproof

sytex

Rebuilding of a 9 year old site: (Click to enlarge the pictures) BEFORE: http://printerfair.hu/link/cs/tn/b1.jpg http://printerfair.hu/link/cs/tn/b2.jpg http://printerfair.hu/link/cs/tn/b3.jpg THE WORK: http://printerfair.hu/link/cs/tn/d1.jpg http://printerfair.hu/link/cs/tn/d2.jpg http://printerfai...

sytex

One of our APs
can you please tell me the manufacturer of those Small size antennas? and they performances

Which one?

sytex

The distance is 11Km. Signal level: -55/-60 CCQ:100/95 Data Rates:150/150 And the one chain setup: 1chain.png I made a mistake upper, the cards are not r5hn, they are r52hn. There are two MMCX connectors on the card, simply we plugged in only one pigtail cable, and leaved the other empty. Nagyon szí...

sytex

what about the actual performance?

JRC-24-EXTREME, RB411AH, R5hN, Single Chain setup, 40Mhz, nv2, net. 98Mbps (Measured with two notebooks, with iperf).

sytex

I think, on picture is 24dB version http://en.jirous.com/antenna-5ghz/jrc-24-extrem 29dB version have larger bracket. Performance is good, you can use box for routerboard http://en.jirous.com/Accessories-complements/jr-200 You are right, this is the 24dBi version. We use lot of them on backbone lin...

sytex

What are the relays for in this image? http://forum.mikrotik.com/download/file.php?id=8553 How do you control them? Under the batteries, you can se a little grey box. That's a GSM pager. One of the relays is connected to Output, I can restart the whole site with one call. The other relay is connect...

sytex

I dont like this indoor UTP....

???

sytex

Increase Hardware Retries to 10-15 on both sides.

sytex

AP in suburb area. 1xJRC24 3x120 degree sector: http://www.printerfair.hu/link/dobonkut1.jpg http://www.printerfair.hu/link/dobonkut2.jpg http://www.printerfair.hu/link/dobonkut3.jpg http://www.printerfair.hu/link/dobonkut4.jpg http://www.printerfair.hu/link/dobonkut5.jpg http://www.printerfair.hu/l...

sytex

One of our APs

sytex

How about an 'Uptime Contest'? Me start:

sytex

This works, thank you!!!

sytex

Someone? Anyone? Mikrotik?

sytex

All the other (ether) interfaces give back 100000000 (100Mbps), so they are good.
My greatest problem is that: I draw this links in dude, and if there is more than 5-6 Mbps traficc on them, the links's color goes to red.

But after I found that snmp error, I think it is RouterOS error, not Dude error.

sytex

Please read this topic in Dude Forum. I figured out it's not a Dude problem, it's ROS problem.

http://forum.mikrotik.com/viewtopic.php?f=8&t=31704

sytex

I think i found the answer. I made an SNMPWALK on the device and at the 1.3.6.1.2.1.2.2.1.5.2 oid there is 11000000 as value. Who can answer me, why is the RB411AH "telling" this speed about an interface named wlan1??? Not only RB411, lot of RBs are giving the wrong value on snmp....

sytex

I can put around 20 mbits (tcp) through this links. So I can say the quality is good, and the 11mbit determined speed is wrong.

sytex

Why is the dude determinating our 5Ghz links speed to 11Mbps???

For example:

This link is between an RB433 with R52 and an RB411 with R52

sytex

We have an X86 based Dude server, running ROS 3.18 on it, with dude 3.1.

At ~8:20 and ~11:20 we made a restart on it.
This is a picture of temperature chart, data sources are collected on SNMP.

What is this???

sytex

Hi! We have this network: http://printerfair.hu/network.jpg The AP is running AP BRIDGE mode, with a WDS interface bridged with the ether interface. The client is running in STATION WDS mode, bridged with ether interface. Singal on Client side: -75/-67 SNR: 37 Office router is masqurading the inside...

sytex

Sorry I can't understand your last sentence..

sytex

Is there possible way to send out more commands to the serial port from one script, and wait for the OK string between the commands?

sytex

1, Make an export from 3.0
2, Upgrade dude (if you start it now the images and texts are gone)
3, DON'T PANIC
4, Feed the export to the new dude
5, Enjoy using this great software

Edit: Between step1 and step2 I made a ROS upgrade 3.17->3.18 too

sytex

Sorry but, what is the store support? Or: I read somewhere, it is not recommended to operate dude of CF cards. If you have a lot of licensed CF cards, but you haven't any of licensed hard disks, you can boot MT from the cf, and operate dude on hard disk. (This is my case, this is why I waited for t...

sytex

Manymanymanymany thanks for the store support

sytex

On the pc at my work, there was the installer downloaded, I copied it here (Home) and that installed fine....

sytex

Next dude, or next RoS version???

sytex

I've downloaded the installer from here, but when I start it, I get an NSIS Error window. It says, that the installer integrity chack has been failed.

sytex

Okay, but: today I set my global polling intervall to 1 minute !!! and the ping fails, I did not press the Reprobe button or anything. Just set the Intervall, waited 2-3 hours and looked the graphs. And still error. We have a device which pings 100-200 ms (by the graph), in the same dude, where thes...

sytex

Changing the probe interval did not help....

sytex

Thanks for your answer. We use default intervals, but I'll try what you said.

sytex

Okay than again:

My problem is: when I ping something it replies with 0,1-10ms, but on the graph there are values between 0-150 ms, with ca. 40ms average. THESE ARE NOT THE REAL VALUES.

sytex

http://dufmil2005.hu/rumli/link/chart.jpg

As you see there is the chart and the history of ping and ping 2 on the same device.

sytex

Look at the picture in the first post, there are two ping services with the same settings. On the graph, the blue one shows the correct values (<1ms-10ms) the red one shows incorrect values. After a reboot (on the dude server) the blue one is showing the wrong values too, but when I make Tools-Ping ...

sytex

Hello again MIkrotik guys (and forum users)! First please forgive me for my bad english! After spendig very-very lot time with testing I've find the next: I connected a device direct to my dude server, there are no switches, routers, wireless links etc. between them, and added this device to a map. ...

sytex

still wrong in rc3

sytex

UP

I can't believe this error is only on my dude server....

sytex

I am so sad :( Yesterday I installed the rc2 on an x86 with ros 3.13. A began to redraw our maps, because we are making a new look to the maps thanks for the new features.This ping graph error went away, everything was fine. At end of work I shut down our new dude server (it is in development status...

sytex

Has anyone figured out, how to download and install the dude to a PC where NOD32 is running?

sytex

I've just installed it on x86, ROS 3.13, universal version dude package

sytex

Is the v3rc1 available as ROS package?

sytex

The first comments are on a windows based dude server. Yesterday I installed ROS on a PC with dude package, migrated the config, and noticed the same error.
Has anyone any idea, or had anyone problem like this before?

sytex

And after some time the second probe is showing wrong values.

sytex

The next what I found is this:

Look at the chart, where the ping and ping2 graphs are. Why is the difference?
The ping2 shows the correct values!

sytex

"Contents" menu on the left side. The second line is "Tools" dubleclick. Red Plus, then add the tool. Now you created a tool globaly for all the devices... OR: "Contents" menu again, select Devices. Then Select Types tab. You can create a custom device type (computers),...

sytex

+1 vote: in the next version it would be great if the dude remember the last sort setting

sytex

After spending a whole day with testing, downgrading, upgradeing, packet monitoring I found the reason. When I make Tools-ping or Tools-traceroute in Dude, the dude makes an SNMP request for the SysName to show it in the Name field of the ping/traceroute window. But: The dude tries ALL of the SNMP p...

sytex

No. I ping it from server. For example this is an APC Smart 3300 UPS: http://sytex.extra.hu/link/dude_ping.jpg http://sytex.extra.hu/link/dude_syslog.jpg One ping makes this nine log entries. The SNMP read community is good (I display runtime and input voltage in Dude, and that works correctly)

sytex

Anybody?
Mikrotik guys/girls?

sytex

In our system, if I make a tools-ping on a non ROS device, the device writes authentication failure-s in their log file. I have noticed this in several type of devices. I think it's only since we upgraded to 3beta8 (not sure maybe it is from 3beta7 too). So the question: What is doing dude when I ma...

sytex

"Execute on Mikrotik" type notification would be great. I mean: If a service (or a device) changes status, The dude runs a command or a script on an other Mikrotik device. Example: Two gateways to internet, gw1 gw2. 1 main router (which connects to the gateways). If gw1 is down, then a scr...

sytex

Add new probes, add new notification (e-mail type), then add these probes to the devices in the services page. On the service details (double click on the service in the list), choose notifications page, make a stick on the 'use notifications' box, and stick the notifications, that you want to activ...

sytex

http://forum.mikrotik.com/viewtopic.php?f=8&t=22632

sytex

Write '/dude' after the ip adress/hostname in browser

sytex

If you are running Dude server on windows, the try "Execute on Server" type notification.... maybe....

sytex

1st, logging: We use dude to collect syslog messages from the devices. When I look in the log in the dude, the time is correct, but when I open the log file stored in the disk, the timestamps are in GMT, not my timezone. 2st, Notofication: A set up a mail notification using [DateAndTime]. In the mai...

sytex

I've got the same problem. I'm using JPG images size from 70k-200k, the redrawing is very slow, and has errors while scrolling. Another Image error: I'm using map jpgs for background. The Devices is placed is correct position on the default zoom, but when I zoom in or out, the rate of zooming is dif...

Search found 85 matches