Community discussions

MUM Europe 2020

Search found 58 matches

by rednetwifi
Sun May 08, 2011 3:14 am
Forum: General
Topic: Can you route mark Vonage.
Replies: 5
Views: 758

Re: Can you route mark Vonage.

Thank you, i will try it out 1st thing in the Morning.
by rednetwifi
Sat May 07, 2011 5:46 pm
Forum: General
Topic: Can you route mark Vonage.
Replies: 5
Views: 758

Re: Can you route mark Vonage.

All of the links are from the same provider, i am sure its a routing or NAT problem, just i dont know where to start.. Any advise would be great.

Thanks

D
by rednetwifi
Sat May 07, 2011 2:47 pm
Forum: General
Topic: Can you route mark Vonage.
Replies: 5
Views: 758

Can you route mark Vonage.

Hello, we have 4 ISP links and we would like to route all traffic going to Vonage down one link? I have tried nearly everything i can think of and i cant get it to work, same thing with everything i try, the remote phone rings, and thats it, cant hear the other person and also does not ring on the p...
by rednetwifi
Mon Jan 03, 2011 8:27 pm
Forum: Scripting
Topic: Help with Ping script, done something wrong. Advise please.
Replies: 0
Views: 630

Help with Ping script, done something wrong. Advise please.

We have 4 links which we would like to monitor by pinging an outside ip address and if the ip address is not available, the script will move the distance of that route to 3. In the routes we have backup links set to distance of 2. So if the link fails to ping correctly it will move the main route to...
by rednetwifi
Fri Dec 17, 2010 1:14 pm
Forum: Scripting
Topic: Script to change AP Freq - PAID
Replies: 1
Views: 722

Script to change AP Freq - PAID

Hi, We have started having a problem with someone who keeps moving there radios to the same frequencies as we are using. I am hoping that it is just a genuine mistake, but it’s happening a lot lately. We would like to know if it is possible to have a script which checks if someone moves on to the sa...
by rednetwifi
Mon Feb 22, 2010 3:36 am
Forum: Beginner Basics
Topic: DHCP Relay
Replies: 15
Views: 19885

Re: DHCP Relay

Dont know what i am doing wrong, but here is my network plan and a copy of the dhcp config. add address-pool=dhcp_pool1 authoritative=after-2sec-delay bootp-support=\ static disabled=no interface=ether1 lease-time=3d name=dhcp1 /ip dhcp-server config set store-leases-disk=5m /ip dhcp-server network ...
by rednetwifi
Sun Feb 21, 2010 8:54 pm
Forum: Beginner Basics
Topic: DHCP Relay
Replies: 15
Views: 19885

DHCP Relay

Can someone point me in the the right direction I have a split network and i want to have 1 dhcp server to handle all the leases for the lot. Gateway is on 192.168.0.0/24 - Where DHCP server will be on Local Machines addresses - 192.168.0.0/24 1st Access Point is 10.10.2.0/24 2nd Access Point is 10....
by rednetwifi
Sat Jan 23, 2010 2:28 pm
Forum: General
Topic: VOIP Phones not ringing HELP PLEASE
Replies: 8
Views: 4453

Re: VOIP Phones not ringing HELP PLEASE

Yeah i think it is something i am doing as i am sure loads of people use this kind of setup.... Just tying to find out whee the problem could be.
by rednetwifi
Fri Jan 22, 2010 7:39 pm
Forum: Wireless Networking
Topic: ROS for RB800 - where/how to download latest version?
Replies: 4
Views: 760

Re: ROS for RB800 - where/how to download latest version?

Is http://www.mikrotik.com/ working right now?

Time: 1840 22/01/2010 +1CMT

trying to download update
by rednetwifi
Fri Jan 22, 2010 2:47 pm
Forum: General
Topic: VOIP Phones not ringing HELP PLEASE
Replies: 8
Views: 4453

Re: VOIP Phones not ringing HELP PLEASE

Tried that, and still the same, i have also turned on upnp... But still no ringing..
by rednetwifi
Fri Jan 22, 2010 1:31 am
Forum: General
Topic: VOIP Phones not ringing HELP PLEASE
Replies: 8
Views: 4453

Re: VOIP Phones not ringing HELP PLEASE

Hello thanks for the reply. Yes, the call connects to the person that you are calling, but does not ring on the person calling side. On the vonage system there is no nat settings which i can find. Totally lost.... :? Works fine without the Mikrotik, soon as you put it on all calls go wrong, so its g...
by rednetwifi
Mon Jan 18, 2010 3:48 pm
Forum: General
Topic: VOIP Phones not ringing HELP PLEASE
Replies: 8
Views: 4453

VOIP Phones not ringing HELP PLEASE

Hello, possible for some advice please. We have a Mikrotik Gateway running in NAT-Masquerade and a draytek vigor 3300v with 4WAN connections which we load balance over and setup have a static udp/tcp rules so call VoIP goes down one of the WANs, when it is configured like this none of the VOIP ring,...
by rednetwifi
Wed Oct 14, 2009 12:44 pm
Forum: Beginner Basics
Topic: Queue Trees / Simple Queues / Fair Usage / Layer 7 Questions
Replies: 1
Views: 1152

Queue Trees / Simple Queues / Fair Usage / Layer 7 Questions

Hello, some advise please regarding Queues and Queue Trees. Currently was have over 200 simple queues for our customers, I have been reading the wiki and watching the tiktube and I think it would be better to move over to queue trees and use less power on the gateway. However I have a few questions ...
by rednetwifi
Tue Jul 07, 2009 12:32 pm
Forum: Scripting
Topic: Scripts working, just not running in Sheduler
Replies: 4
Views: 1257

Scripts working, just not running in Sheduler

I have a few scripts that when you press the Run script button in scripts menu they work perfectly, however when i set them up in the Sheduler they do not run at all. All the Sheduler display information is correct when its going to run and when, but when i check it the script did not run. This only...
by rednetwifi
Sun May 24, 2009 1:16 pm
Forum: General
Topic: Firewall Rule problem.
Replies: 3
Views: 1548

Re: Firewall Rule problem.

I am running squid 2.6 Stable however the only way I seem to be able to make it work is to set squid with a different gateway other than the MT. We are using a RB600. We have the WAN and the LAN setup as described here http://forum.mikrotik.com/viewtopic.php?f=13&t=26806 Here is a network layout pla...
by rednetwifi
Thu Feb 26, 2009 12:15 am
Forum: Beginner Basics
Topic: Bandwidth Capping for Anonymous Users
Replies: 6
Views: 1341

Re: Bandwidth Capping for Anonymous Users

Hello.

Can you post the one which you have working with the spaces removed?
by rednetwifi
Sun Jan 25, 2009 5:21 pm
Forum: General
Topic: RE routing P2P
Replies: 9
Views: 1542

Re: RE routing P2P

Thank you
by rednetwifi
Sun Jan 25, 2009 9:34 am
Forum: General
Topic: RE routing P2P
Replies: 9
Views: 1542

Re: RE routing P2P

I would like to try it, is there any links you know of to be able to show me how to do this? Had a quick look at the Wiki, but just about to go up a mountain installing.

Any advice would be very gratefully received.

Regards

Darren
by rednetwifi
Sat Jan 24, 2009 3:33 pm
Forum: General
Topic: RE routing P2P
Replies: 9
Views: 1542

RE routing P2P

Hello. We have 3 High speed lines, and currently we are blocking P2P on RB600a V3.10, but since we have installed a 3rd line would would like to open p2p to our customers. Currently we are using the /ip firewall rule all p2p drop. Is there any way to redirectl all p2p traffic to a specific gateway s...
by rednetwifi
Mon Nov 24, 2008 12:44 am
Forum: Scripting
Topic: Queue Script.
Replies: 6
Views: 3940

Queue Script.

Hello i have managed to get all my scripts i need working by looking at other scripts and looking at the wiki, however this one i cant seem to do. I have tried examples of other scripts and they dont work. So i am wondering if i have my queue setup correctly for this script. What i want to be able t...
by rednetwifi
Thu Nov 13, 2008 11:58 am
Forum: Beginner Basics
Topic: QUEUES AND FUP Scripts
Replies: 1
Views: 996

Re: QUEUES AND FUP Scripts

Anyone?
by rednetwifi
Wed Nov 12, 2008 1:59 am
Forum: Beginner Basics
Topic: QUEUES AND FUP Scripts
Replies: 1
Views: 996

QUEUES AND FUP Scripts

Hello. i have managed to get all of my queues working and scripts to FUP people when the go over 4GB, however the part i cant see to find a clear answer to is this.. If the router powers off or reboots we lose all the transfered data information. Can this data be saved so it recovers on reboot, or a...
by rednetwifi
Wed Sep 10, 2008 11:13 am
Forum: Scripting
Topic: Simple Script Help.
Replies: 4
Views: 1061

Re: Simple Script Help.

Thank you very much.

I get that part now, how could you get up that the ping would go though a ethernet lan of your choice.

Say i wanted to ping the modems gateway though the ethernet card which it is connected to and not from the other LANs.

How would that work?
by rednetwifi
Wed Sep 10, 2008 3:27 am
Forum: Scripting
Topic: Simple Script Help.
Replies: 4
Views: 1061

Simple Script Help.

I am trying to learn script. Can someone show me how i would do a simple script. To ping an ip address and if no reply shutdown gateways 0 A S ;;; Cable 0.0.0.0/0 reachable 192.168.0.1 1 ether1 1 S ;;; Telefonica 0.0.0.0/0 reachable 192.168.9.10 2 ether2 2 ADC 192.168.0.0/24 192.168.0.251 0 ether1 3...
by rednetwifi
Mon Sep 08, 2008 9:14 pm
Forum: General
Topic: Help Needed: Multiple WAN but 1 gateway
Replies: 12
Views: 1710

Re: Help Needed: Multiple WAN but 1 gateway

I am intrested in this post too, i think they mean,just have to change the ip address for the LAN cards and modems MODEM 1 LAN IP 192.168.1.1 ----> ROUTER 192.168.1.2 LAN MODEM 2 LAN IP 192.168.2.1 ----> ROUTER 192.168.2.2 LAN MODEM 3 LAN IP 192.168.3.1 ----> ROUTER 192.168.3.2 LAN MODEM 4 LAN IP 19...
by rednetwifi
Mon Sep 08, 2008 1:08 pm
Forum: General
Topic: Firewall Rule problem.
Replies: 3
Views: 1548

Firewall Rule problem.

Hi, I have RouterOS 3.1 and using it to dst nat traffic to my Squid server.I bet this is going to be a stupid question but here goes. In the Firewall NAT i forward all port 80 traffic to Squid (192.168.0.4) on port 3128, and squid sends it out to the internet on gateway 192.168.0.1 However and i am ...
by rednetwifi
Sun Aug 24, 2008 8:04 pm
Forum: Wireless Networking
Topic: Help needed on Wireless Setup.
Replies: 2
Views: 1066

Re: Help needed on Wireless Setup.

This was the config i was thinking of when i was reading the WDS setup for joining 2 networks? Will it work for my plan? 1. Configure CehegnAP Wireless WLANS (Town1) [admin@AP] interface wireless set wlan2 ssid=OfficeBH frequency=5660 mode=bridge wds-mode=dynamic disabled=no [admin@AP] Interface wi...
by rednetwifi
Sat Aug 23, 2008 2:26 pm
Forum: Wireless Networking
Topic: Help needed on Wireless Setup.
Replies: 2
Views: 1066

Help needed on Wireless Setup.

Hello, Being a newbie to MT I am in need of some advise. I have downloaded the Manual for ROUTEROS and read it though and still stuck, I have googled what I need and searched the WIKI for assistance (i can hardly find anything on that search box). However with no luck or any further understanding. I...
by rednetwifi
Fri Aug 22, 2008 12:44 am
Forum: Beginner Basics
Topic: Please help, we have a faulty RB600 AP-Bridge
Replies: 2
Views: 859

Re: Please help, we have a faulty RB600 AP-Bridge

ALL WORKING NOW.
by rednetwifi
Fri Aug 22, 2008 12:12 am
Forum: Beginner Basics
Topic: Please help, we have a faulty RB600 AP-Bridge
Replies: 2
Views: 859

Please help, we have a faulty RB600 AP-Bridge

Please help, we have a faulty RB600 AP-Bridge which died today. We have replaced it with a RB433 as we had one laying around and I need help setting it back up as an access point, as we purchased it ready configured so we backed up the config file from the RB600, thought I might get lucky and see if...
by rednetwifi
Tue Aug 19, 2008 2:44 pm
Forum: Beginner Basics
Topic: External Proxy
Replies: 10
Views: 1953

Re: External Proxy

the first link is a config file for RouterOS, i will print out the config and post when i get back in to the office.
by rednetwifi
Sun Aug 17, 2008 11:54 pm
Forum: Beginner Basics
Topic: External Proxy
Replies: 10
Views: 1953

Re: External Proxy

Hello. I have setup something similer for our network, using RouterOS 3.10 and Squid 2.7 I hope you find this info helpful as i had a lot of support from this forum to get it working. Here is the RouterOS 3.10 Config for forwarding port 80 traffic to squid. http://www.rednetwifi.com/images/Proxy%20W...
by rednetwifi
Sat Aug 16, 2008 1:51 am
Forum: Wireless Networking
Topic: Problems with Bridge - Please can someone check my config
Replies: 0
Views: 1165

Problems with Bridge - Please can someone check my config

Hello we are in the middle of a new network project which has 3 stages. I am having a problem setting up bridge links using 1xRB600 and 2x RB433 Units with 3x AR5413 Radios in each. Please can someone look at my config below and see if you can see what I have done wrong, as i cant get them to link. ...
by rednetwifi
Mon Jul 28, 2008 10:25 am
Forum: General
Topic: Versions of Licence for ROUTEROS
Replies: 4
Views: 683

Re: Versions of Licence for ROUTEROS

yes, correct

Thank you.
by rednetwifi
Mon Jul 28, 2008 10:18 am
Forum: General
Topic: Versions of Licence for ROUTEROS
Replies: 4
Views: 683

Re: Versions of Licence for ROUTEROS

for user manager full functionality you need L6, because L4 will allow you only 20 active sessions (active connections. when 5 people with same username are connected, it means 1 user, 5 sessions). We dont use Auth on the gateway so i guess if 21 people try to connect it will not allow 1 of the con...
by rednetwifi
Mon Jul 28, 2008 10:09 am
Forum: General
Topic: Versions of Licence for ROUTEROS
Replies: 4
Views: 683

Versions of Licence for ROUTEROS

Hello. I have made a machine as an internet gateway which is going to be supporting 100+ Clients. I have been looking thought the microtik website at the software versions. http://www.mikrotik.com/pricelist.php Under User manager active sessions, does that mean the about of people that can go though...
by rednetwifi
Sun Jul 20, 2008 5:53 pm
Forum: General
Topic: RouterOS Squid and ISA 2006
Replies: 1
Views: 717

RouterOS Squid and ISA 2006

Hello I have been using squd and working fine with PORT 80 DSTNAT. However we would like to try the ISA cache. ALL I WANT TO USE ON ISA IS THE PROXY WITHOUT ADDING DETAILS TO CUSTOMERS MACHINES I have setup to redirect all port 80 to 8080 on ISA but i cant get any webpages unless i manualy enter in ...
by rednetwifi
Thu Jul 10, 2008 11:47 am
Forum: Scripting
Topic: Ping Script..
Replies: 1
Views: 1407

Ping Script..

I have a DST-NAT which i am using to forward request to my external proxy server.. I am new to all of this... The way i think would be easy would be. Write a script which will ping my PROXY server and if there is no reply it removes the NAT rule and when it come back online and starts pinging again ...
by rednetwifi
Thu Jul 10, 2008 11:10 am
Forum: Scripting
Topic: Scripts disable and enable redirect external proxy
Replies: 3
Views: 1678

Re: Scripts disable and enable redirect external proxy

Hello.

Did you ever figure this out, as i am looking to do the same.

Regards

Darren
by rednetwifi
Thu Jul 10, 2008 11:07 am
Forum: Scripting
Topic: Web Proxy FailOver Help
Replies: 3
Views: 1738

Re: Web Proxy FailOver Help

Did you every find a solution to this problem?
by rednetwifi
Thu Jul 10, 2008 10:56 am
Forum: Beginner Basics
Topic: Port 80 redirect to standalone Squid Proxy server
Replies: 10
Views: 6475

Re: Port 80 redirect to standalone Squid Proxy server

Once again thanks to the Forum i was able to get squid now working correctly as a Transparent Cache. Now got to work on failover just in case it stops working. If anyone is having problems configuring squid, please email me and i will send you my squid.conf setup with the RouterOS Config so you can ...
by rednetwifi
Wed Jul 09, 2008 3:39 pm
Forum: Beginner Basics
Topic: Port 80 redirect to standalone Squid Proxy server
Replies: 10
Views: 6475

Re: Port 80 redirect to standalone Squid Proxy server

ok, that seems to be working, now i have a problem with squid i think. I get this error.. :( ERROR The requested URL could not be retrieved While trying to process the request: GET / HTTP/1.1 Host: http://www.google.co.uk User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.8.1.15) Gecko...
by rednetwifi
Wed Jul 09, 2008 3:24 pm
Forum: Beginner Basics
Topic: Port 80 redirect to standalone Squid Proxy server
Replies: 10
Views: 6475

Re: Port 80 redirect to standalone Squid Proxy server

ip firewall
dst-nat protocol=tcp dst-port=80 Action dst-nat to-address=192.168.0.4 to-ports=3128

Would that be correct then?
by rednetwifi
Wed Jul 09, 2008 3:11 pm
Forum: Beginner Basics
Topic: Port 80 redirect to standalone Squid Proxy server
Replies: 10
Views: 6475

Re: Port 80 redirect to standalone Squid Proxy server

I need to install the package, do i need to reinstall the whole lot? I am running on a demo version to get setup then going to buy the licence.

Can i get the package when using a demo?
by rednetwifi
Wed Jul 09, 2008 3:07 pm
Forum: Beginner Basics
Topic: Port 80 redirect to standalone Squid Proxy server
Replies: 10
Views: 6475

Re: Port 80 redirect to standalone Squid Proxy server

oh i think i have been confusing myself more than anything... Will give it a try.
by rednetwifi
Wed Jul 09, 2008 1:25 pm
Forum: Beginner Basics
Topic: While Web Proxy gets fixed, what can I use?
Replies: 11
Views: 2649

Re: While Web Proxy gets fixed, what can I use?

I did use the windows version, its good but most of the add on appz would not work as they are manly used for Linux etc, but i had not problems with it. 2.6 stable version. Now installed ububtu and setting used to working on Linux... not easy for me as i have always used Windows. If you cant find th...
by rednetwifi
Wed Jul 09, 2008 1:13 pm
Forum: Beginner Basics
Topic: Capped Usage
Replies: 3
Views: 913

Re: Capped Usage

Very good questions, i did not think about doing this untill i read your post.

I like the idea.

I would love to know how you get on with this.
by rednetwifi
Wed Jul 09, 2008 12:46 pm
Forum: Beginner Basics
Topic: how to stop any p2p
Replies: 12
Views: 7710

Re: how to stop any p2p

Thank for that post i have added it in and going to test it, as we dont allow p2p over our network... bandwidth issues.

:)
by rednetwifi
Wed Jul 09, 2008 12:31 pm
Forum: Beginner Basics
Topic: Port 80 redirect to standalone Squid Proxy server
Replies: 10
Views: 6475

Port 80 redirect to standalone Squid Proxy server

Hello, Please can some one give me a bit of info.. I have looked at this link http://www.mikrotik.com/testdocs/ros/2.9/ip/webproxy.php and confused the hell out of me.. :? :? :? And i am well still confused.. We run a 2.6 Squid server on a standalone machine. I dont want the ROUTEROS to handle the c...
by rednetwifi
Tue Jul 08, 2008 9:35 am
Forum: Beginner Basics
Topic: Help with 3.10 routerOS! 2 Nics Gateway
Replies: 13
Views: 2562

Re: Help with 3.10 routerOS! 2 Nics Gateway

Thank you.
by rednetwifi
Tue Jul 08, 2008 8:03 am
Forum: Beginner Basics
Topic: Help with 3.10 routerOS! 2 Nics Gateway
Replies: 13
Views: 2562

Re: Help with 3.10 routerOS! 2 Nics Gateway

Excellent news... it worked! Thank you so much for your assitance, why did the other rules not work? Now just got to get redirected traffic to squid on 192.168.0.2 and my project is almost done...

Time to backup the system.

Thanks again!!!

:D :D :D :D :D
by rednetwifi
Tue Jul 08, 2008 1:18 am
Forum: Beginner Basics
Topic: Help with 3.10 routerOS! 2 Nics Gateway
Replies: 13
Views: 2562

Re: Help with 3.10 routerOS! 2 Nics Gateway

Still Stuck..... can anyone post me a step by step sheet to get this working? PLEASE i am pulling my hair out!!! Please can some one save the day... This must be something i am doing wrong as i would imagine this is one of the most basic funcations... Thought it would not be this hard. Had enough fo...
by rednetwifi
Mon Jul 07, 2008 6:52 pm
Forum: Beginner Basics
Topic: Help with 3.10 routerOS! 2 Nics Gateway
Replies: 13
Views: 2562

Re: Help with 3.10 routerOS! 2 Nics Gateway

# ADDRESS NETWORK BROADCAST INTERFACE 0 ;;; local Lan 192.168.0.251/24 192.168.0.0 192.168.0.255 ether1 1 ;;; WAN 192.168.9.100/24 192.168.9.0 192.168.9.255 ether2 Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=masquerade src-address=192.168.0.0/24 # DST-ADDRESS PREF-SRC GATEWAY...
by rednetwifi
Mon Jul 07, 2008 6:40 pm
Forum: Beginner Basics
Topic: Help with 3.10 routerOS! 2 Nics Gateway
Replies: 13
Views: 2562

Re: Help with 3.10 routerOS! 2 Nics Gateway

here is the parts on the export /ip address add address=192.168.0.251/24 broadcast=192.168.0.255 comment="local Lan" disabled=no interface=ether1 network=192.168.0.0 add address=192.168.9.100/24 broadcast=192.168.9.255 comment=WAN disabled=no interface=ether2 network=192.168.9.0 /ip dhcp-server netw...
by rednetwifi
Mon Jul 07, 2008 4:49 pm
Forum: Beginner Basics
Topic: Help with 3.10 routerOS! 2 Nics Gateway
Replies: 13
Views: 2562

Re: Help with 3.10 routerOS! 2 Nics Gateway

Going to try it now. Thanks for the input
by rednetwifi
Mon Jul 07, 2008 3:52 pm
Forum: Beginner Basics
Topic: Help with 3.10 routerOS! 2 Nics Gateway
Replies: 13
Views: 2562

Re: Help with 3.10 routerOS! 2 Nics Gateway

Ok i have added a DCHP server, and this is what is happening.

I have a DHCP address which has been assigned:

IP 192.168.0.98
SUBNET: 255.255.255.0
GATEWAY: 192.168.0.251

i can ping 192.168.0.251, and i can ping 192.168.9.100

however i can not ping 192.168.9.1 - destination is unreachable. :(
by rednetwifi
Mon Jul 07, 2008 3:07 pm
Forum: Beginner Basics
Topic: Help with 3.10 routerOS! 2 Nics Gateway
Replies: 13
Views: 2562

Re: Help with 3.10 routerOS! 2 Nics Gateway

Thank you.

I have tried it and it did not work? Going to reset it and try agian, in case i have made a mistake

Would i need to add a DHCP server to the internat network
by rednetwifi
Mon Jul 07, 2008 1:32 pm
Forum: Beginner Basics
Topic: Help with 3.10 routerOS! 2 Nics Gateway
Replies: 13
Views: 2562

Help with 3.10 routerOS! 2 Nics Gateway

Hello. Please can someone help me or point me in the correct direction as i am very new this this. I want to have a machine was acts as a gateway for my network. Can someone post instructions on how i would do this. I have a machine with 2nics Nic 1 192.168.0.251 Nic 2 192.168.9.100 ADSL modem: 192....