Hi everybody, i have a problem with my rb750g. If I connect into routerboard my pc and my ntb and try to copy data from pc to ntb, then average speed of copying is around 20 - 25 MB/s. But if i try to copy data from ntb to pc, average speed of copying is around 50 - 300 kB/s. All ports (pc and ntb) ...

Just to jump in with a warning ... It appears that MT 4.13 + NV2 npk are causing RB600 to freeze. This is not yet confirmed and 100% sure, but if you plan on putting 4.13 + NV2 on RB600, take caution. We'll see what will be reply from MT support. Yes, i can confirm freezing of rb600. This is from 4...

this is my dstnat rule ...

chain=dstnat dst-address=1.1.1.1 protocol=tcp dst-port=62003
action=dst-nat to-addresses=192.168.2.3 to-ports=60003

problem isnt in dstnat rule, but sure anywhere else ...

Show me your NAT rule and specify from where you are connecting to the router. I am sure, that my NAT rule is OK, because on the other routeros, where is mikrotik situated and is in needed version that NAT rule is ok and winbox connection is function. My mistake in NAT settings is out. Probably the...

1) Make sure that you have correct destination NAT rule. 2) Check that you have changed Winbox port on 'ip service' for 60003. 3) You need to use the latest Winbox version 2.2.13. The same configuration works fine for me with 3.9 version and the latest Winbox. Thank for your answer, but every your ...

I have a problem with connecting with winbox on routerboard 4xx and 1xx with routerboard OS 3.5 and higher. Same problem i have with connecting on routerboard 532 and 600, when is installed ROS 3.2, 3.3, 3.5 and 3.7 or higher when is routerboard situated in private network and remote control is prov...