Community discussions

MUM Europe 2020

Search found 15 matches

by neoplan
Thu Sep 24, 2009 3:32 pm
Forum: General
Topic: RouterOS v4 RC1 released
Replies: 22
Views: 3855

Re: RouterOS v4 RC1 released

dont know if i am doing something wrong. i was used to "print oid" to get the signal strenght oid in the reg-table
now on rc1 "print oid" shows me the same result as "print" both on reg-table and on system/resources

any ideas?
by neoplan
Sun Jun 21, 2009 3:20 pm
Forum: General
Topic: Can't connect with serial console to 433AH
Replies: 3
Views: 839

Re: Can't connect with serial console to 433AH

I use an adaptor to USB and a Null cable that i made myself.
The problem could be the handmade cable but it works just fine when i plug the rb532. :? :? :?
by neoplan
Sat Jun 20, 2009 8:19 pm
Forum: General
Topic: Can't connect with serial console to 433AH
Replies: 3
Views: 839

Can't connect with serial console to 433AH

Greetings to all. I am trying to connect with Null Modem Cable to my 433 routerboard but without success. Although i can see the boot menu and the login screen, i can't send commands through my keyboard of my terminal. I have set Flow Control to None, baud rate to 115200, 8 N 1 both on routerboard a...
by neoplan
Thu Apr 23, 2009 6:45 pm
Forum: Wireless Networking
Topic: AP-Bridge and Station on the same interface
Replies: 4
Views: 1313

Re: AP-Bridge and Station on the same interface

1. Setup the wlan interface as AP Bridge 2. Create a bridge interface 3. Create a Virtual AP with Dynamic WDS 4. Add the Virtual AP to the bridge 5. Add IP address to the wlan interface 6. Add IP address to the bridge interface 7. Configure BGP So the wlan (on AP Bridge), the VirtualAP or the bridg...
by neoplan
Tue Apr 21, 2009 11:53 pm
Forum: Wireless Networking
Topic: AP-Bridge and Station on the same interface
Replies: 4
Views: 1313

Re: AP-Bridge and Station on the same interface

thanks for your reply.
i will check it out in the morning :D
by neoplan
Tue Apr 21, 2009 5:44 pm
Forum: Wireless Networking
Topic: AP-Bridge and Station on the same interface
Replies: 4
Views: 1313

AP-Bridge and Station on the same interface

Greetings to all! I am trying to make the following setup but i would like a few advice on how to achieve that. On a mtik lvl4 i have a wireless interface which must work as a station (in order to connect to an access point) and simultaneously as an Ap bridge (so another station connects to that). T...
by neoplan
Mon Dec 08, 2008 12:35 pm
Forum: Wireless Networking
Topic: What is the maximum speed u have seen on wireless
Replies: 11
Views: 2178

Re: What is the maximum speed u have seen on wireless

40 out of 54mbps on 11Km wireless link and 60 out of 108mbps on the same link on turbo mode @ 5.5GHz
and the budget was below 500$ for both stations
by neoplan
Wed Oct 22, 2008 7:10 pm
Forum: Wireless Networking
Topic: WR: 304km with RouterOS + XR5 + handmade antenna
Replies: 77
Views: 62998

Re: WR: 304km with RouterOS + XR5 + handmade antenna

First of all congratulations for this great job!! The most impressive of all is that you used handmade feeders! it seems that they are simply PERFECT! Would you mind giving us the key dimensions? the internal diameter, the total length, the length and the diameter of the cable inside (or did u use ...
by neoplan
Fri Sep 26, 2008 10:01 pm
Forum: Wireless Networking
Topic: NStreme worse results than with regular connection!
Replies: 9
Views: 2079

Re: NStreme worse results than with regular connection!

possibly the cpu of the rb133 is not able to hande the compression required for the nstreme and thats why such low speeds.
by neoplan
Wed Sep 24, 2008 7:02 pm
Forum: Wireless Networking
Topic: How to reach more than 70Mbits
Replies: 10
Views: 2624

Re: How to reach more than 70Mbits

get rid of the routerboards if you want speed.
i have a wireless link on 15km distance and a pentium 450mhz on each side.
I have managed to get 60mbit speed in one direction on turbo mode @ 5ghz
by neoplan
Sun Sep 14, 2008 2:00 pm
Forum: Wireless Networking
Topic: WR: 304km with RouterOS + XR5 + handmade antenna
Replies: 77
Views: 62998

Re: WR: 304km with RouterOS + XR5 + handmade antenna

First of all congratulations for this great job!! The most impressive of all is that you used handmade feeders! it seems that they are simply PERFECT! Would you mind giving us the key dimensions? the internal diameter, the total length, the length and the diameter of the cable inside (or did u use s...
by neoplan
Wed Aug 13, 2008 12:29 am
Forum: The Dude
Topic: Number of clients connected to a specific interface.
Replies: 2
Views: 1217

Number of clients connected to a specific interface.

Hello everybody, in my mikrotik router i have a couple of interfaces which act as access points. Is there any way to display on the dude map the number of clients which are connected to a specific interface? for example the hotspot. I have searched though the forum but i coundn't find anything. I on...
by neoplan
Wed Jun 11, 2008 9:29 pm
Forum: Scripting
Topic: Problem with DNS update script on 2.9.51
Replies: 6
Views: 1921

Re: Problem with DNS update script on 2.9.51

Thanks, i will try to figure out what i going wrong.
by neoplan
Tue Jun 10, 2008 10:11 am
Forum: Scripting
Topic: Problem with DNS update script on 2.9.51
Replies: 6
Views: 1921

Re: Problem with DNS update script on 2.9.51

The DNS servers are set correctly and i have managed to resolve domains from command line successfuly. It's not that :(
by neoplan
Tue Jun 10, 2008 12:53 am
Forum: Scripting
Topic: Problem with DNS update script on 2.9.51
Replies: 6
Views: 1921

Problem with DNS update script on 2.9.51

Hi, i am trying to connect to a PPTP server that does not have a static IP address so on my Mikrotik 2.9.27 router i have scheduled the following script: :global vpn-interface-name "pptp-out" :global vpn-dns-name "dyndns.no-ip.biz" :global new-vpn-ip [:resolve $vpn-dns-name] :global current-vpn-ip [...