Community discussions

MUM Europe 2020

Search found 10 matches

by i-netp
Sat Jan 28, 2017 4:29 pm
Forum: General
Topic: Openvpn windows client - connect but not change IP
Replies: 1
Views: 464

Re: Openvpn windows client - connect but not change IP

Have you executed the windows-gui as "administrator"?
by i-netp
Sat Jan 28, 2017 2:10 pm
Forum: General
Topic: "fcs error on link" on sfp-sfpplus1 on a CCR-1036-8G-2S+
Replies: 1
Views: 1410

"fcs error on link" on sfp-sfpplus1 on a CCR-1036-8G-2S+

Hello all, i sometimes get an error -> "fcs error on link" on sfp-sfpplus1 on our "CCR-1036-8G-2S+" which connects to a sfpplus interface of a "CRS226-24G-2S+". If this happens there is also the connection lost for a second or more. ---------------------------- screenshot-fcs-error.png -------------...
by i-netp
Wed Apr 20, 2016 3:57 pm
Forum: The User Manager
Topic: Isn't it possible to add a user to user-manager with valid profile via cli?
Replies: 2
Views: 910

Isn't it possible to add a user to user-manager with valid profile via cli?

Hello all, is it possible to add a user to user-manager via cli (through ssh) with a valid profile? Currently i have to add a profile to the user via webinterface after adding it via cli in the test-scenario. But have to add all user-credentials on cli at one time. I cannot find any commandline-opti...
by i-netp
Wed Sep 23, 2015 11:50 am
Forum: General
Topic: Logentries on CRS-226 v6.31 -> "excessive broadcasts/multicasts, probably a loop"
Replies: 3
Views: 1308

Re: Logentries on CRS-226 v6.31 -> "excessive broadcasts/multicasts, probably a loop"

Hello all, i now have the same symptom on a RB2011iL with exactly the same warning messages. For me it seems, when i connect an ethernet link to the master-interface of a switch i get exactly this message: [interface, warning ether8 excessive broadcasts/multicasts, probably a loop] But i'm sure that...
by i-netp
Tue Sep 08, 2015 6:04 pm
Forum: General
Topic: Logentries on CRS-226 v6.31 -> "excessive broadcasts/multicasts, probably a loop"
Replies: 3
Views: 1308

Re: Logentries on CRS-226 v6.31 -> "excessive broadcasts/multicasts, probably a loop"

I've now changed the cable from ether1 to ether2 and the warnings don't come any longer. The ether1 interface is also the master-interface for all other interfaces. Is that the reason for this error-messages?
by i-netp
Mon Sep 07, 2015 12:08 pm
Forum: General
Topic: Logentries on CRS-226 v6.31 -> "excessive broadcasts/multicasts, probably a loop"
Replies: 3
Views: 1308

Logentries on CRS-226 v6.31 -> "excessive broadcasts/multicasts, probably a loop"

Hello all, I've switched an uplink from a CCR-1016 to a CRS-226 to another CRS-226 (both with the same type and same ROS-Version v6.31). On the new one i get every 30 seconds the warning message: -> "ether1 excessive broadcasts/multicasts, probably a loop". The two CRSs are connected through SFP+ Fi...
by i-netp
Thu Jun 27, 2013 2:55 pm
Forum: General
Topic: IPSec Peer Portentry 500 goes to 62465
Replies: 5
Views: 1301

IPSec Peer Portentry 500 goes to 62465

Hello all, i have a problem when setting up a ipsec connection between 2 Mikrotik CCR1016-12Gs. When i put in the standard port 500 into the peers setup the system makes a port entry of 62465, as i can see in ipsec/debug log. When i change the port-entry into 0, the port 500 will be used from the sy...
by i-netp
Thu Jan 05, 2012 12:20 pm
Forum: General
Topic: RB/800 - System rebooted because of kernel failure
Replies: 13
Views: 6206

Re: RB/800 - System rebooted because of kernel failure

I've updated the bios to 2.30 and the RouterOS to 5.11. The Board now runs a works a little longer, but do also a "System reboot because of kernel failure". And in the Routerboard there is again no current-firmware visible. ------------ [admin@AP] > system routerboard print routerboard: yes model: 8...
by i-netp
Tue Jan 03, 2012 1:50 pm
Forum: General
Topic: RB/800 - System rebooted because of kernel failure
Replies: 13
Views: 6206

Re: RB/800 - System rebooted because of kernel failure

Hello, was this problem solved? I'm asking because i have the same. The current-firmware-version (bios) won't be displayed and the router reboots many times with exactly the same message "kernel failure". I have currently version 5.5 running on the board. The board is connected to 24POW. Do i need t...