MikroTik

welan

7.12 not working with CCR2004-1G-12S+2XS and RJ45 SFP-GB-GE-T , very sad thing, you fix one thing and break another.

welan

Just opened and supout sent, i believe it is something to do with ospf and or mpls. I have other 2004 routers but they don't reboot that often, some have uptime as much as 20 days. these instead restart every 7-8 hours (OSPF + MPLS, no firewall, mix of 10G 1G interfaces) Same here, 6..48 and a lot o...

welan

Same here, 6..48 and a lot of reboots.

welan

Dears,
I would report this bad behavior in timestamp (up/down) on VPLS tab, I attach a screenshot..
ROS: 6.42.9
Platform: RB2011

P.S.: pls invlude VPLS debug in mikrotik!

welan

Hello,
we are using www.webilly.it, it has a lot of automated script for banking.
They are very willing to make changes to the software on customer needs.
The platform includes freeradius.

welan

This is my choice www.webilly.it

welan

Many thanks for your answer, I'm trying now with a TDMA size of 5 ms.
Any news from other experienced users?
Many thanks.

welan

Hello,
I would like to know what is the best nv2 period size in PtMP scenario.
Is the auto features a good choise? Otherwise 5ms is a good timing?
Many thanks.

welan

Hello to the forum, I see an high CPU usage on Routerboard 450G with ROS 6.27 and FW 3.22. Here a screenshot, this is the first time I see voltage IRQ on RB. zzzz.png I see poor tput on the RB, i'm investigating if this can slow down the 450. Many thanks for support. P.S. I have another RB450G, simi...

welan

I have problem with OSPF on CCR, the default route was not announced correctly, it appears, the disapperars.
Downgraded to 6.15 but I got an error:

Script error: action timed out - try again, if error continues contact Mikrotik support and send a supout file (13)

Help, I'm in production!

welan

Same problem here, disabling auto-negotiation the sfp works, but a lot of jitter on the link.
Any news?

welan

Any news? Same problem here.

welan

Hi, I'm looking to make the same script, this is the code, what was wrong? :global oldfirm [/system routerboard get current-firmware]; :global newfirm [/system routerboard get upgrade-firmware]; :if ([$oldfirm]<[$newfirm]) do={ /system routerboard upgrade; :put "\r"; :delay 1s; :put "...

welan

Many thanks for your answer. I tested all ports, same problem. I do not want to contradict you but version 5.8 was originally installed with a sticker that recommends the upgrade to 6.0. I bought the CCR just came out on the market, is serial is 42A102E22302 / 302. I have experience with Mikrotik de...

welan

No support?

Normis?

welan

Hi to the forum, I have problems accessing via mac address to the router in subject. The router is upgraded to the latest version of ROS, it never went into production and has had this problem since its purchase. The installed version of the initial ROS was 5.8. Now is the 6.7 Any suggestions? Many ...

welan

Same issue here. Up, down, up down. Very annoyed. I have only good memories of 3.30, then just troubleshooting.

welan

Tonight I will try to downgrade.

welan

Hello, thanks for the answer.
My previous version was Ros 5.5.
Stun not enabled and never a problem. Tonight I Willemstad try to downgrade.
Stay tuned.

welan

Hello guys,
I upgraded to ros 5.7 and I experienced one way audio with voip. I have about 300 customers with the same problem.
Anyone have the same problem?
Many thanks.

welan

Hello, I have a similar setup, 40 chilometers, but with XR5 in turbo mode frequency. With the H-POL I have 40 Mbit of TCP (one-way) troughtput. With the V-POL I have 30 Mbit of TCP (one-way) troughtput. The antenna is the same, but I have 4 XR5 running in 4 RB411AH and balanced with OSPF. 100% ccq o...

welan

Hello guys, any future plans to compete with this technology?

http://www.alvarion.com/index.php/en/pr ... treme-5000

Many thanks.

welan

Hello, I would test my Mikrotik OSPF Network, I'm looking for a software that generate traffic for test my two wireless link. I'm looking for a software that generate different type of packets with different src/dst-addresses. Anyone can help me? How OSPF algorithm balance the traffic when there are...

welan

I rebooted the board. The rule is matching the packets.
The image below shows what I see.
I confirm that in the lan the webserver is reachable.

welan

Yes, I have still problem. I cannot reach the webserver, I see in the connection tracking of the firewall, the syn packet of tcp, but I don't see any reply. (In the lan I reach the webserver). If I torch the ether1, I see the connection form my host to the webserver. No idea because the rule don't w...

welan

Hello, I need some help on port forwarding to internal web server on port 80. Here are the rules that I created on the wireless antenna (CPE Client) /ip firewall nat add action=masquerade chain=srcnat comment="" disabled=no src-address=\ 192.168.1.0/24 add action=dst-nat chain=dstnat comme...

welan

Same proble here. Is the web proxy. Try to disable it and the CPU load goes down.
Let me know.

welan

The message above is squid as parent proxy over another subnet, but I tried your solution too: Assume that: 172.16.28.99 is my PC 172.16.27.251 is squid chain=dstnat action=dst-nat to-addresses=172.16.27.251 to-ports=800 protocol=tcp src-address=172.16.28.99 in-interface=ether1 dst-port=80 172.16.27...

welan

Ok, thanks, but if I move my proxy over another subnet, this is the response of mikrotik when I try to surf: ERROR: Gateway Timeout -------------------------------------------------------------------------------- While trying to retrieve the URL http://www.google.it/: Connection refused Your cache a...

welan

Tried, but not surfing.

welan

Ok, I tried to do this, with a simple dst-nat like this:

chain=dstnat action=dst-nat to-addresses=172.16.28.49 to-ports=80
protocol=tcp src-address=172.16.28.0/24 in-interface=ether1 dst-port=800

but I cannot surf. What is wrong?
Thanks

PS: I bought your book, very interesting

welan

Ok, I think that it's not clear my situation. I'm running the RB1000 as a router in my network: Clients 150+ ---> |RB1000 - ROS3.30| ---> INTERNET *********************| / *********************| / *********************|SQUID2.6STABLE7| ------ / The * is for align the picture, sorry. In the RB1000 is...

welan

Hello, I tried to post and my squid is working without any problem. http://messages.finance.yahoo.com/Stocks_%28A_to_Z%29/Stocks_N/threadview?m=tm&bn=12776&tid=230059&mid=230068&tof=1&rt=2&frt=2&off=1 However, I don't use proxy in hotspot, I use squid with my residential ...

welan

Many thanks for the reply. Actually, I have a LINUX-box with squid and HDD as an upstream (parent) cache for my RB, and use RAM-based caching on my RB only (sorry for copy and paste, but your english is better). However when there are online a lot of clients (14-15Mbit of traffic), the CPU of RB1000...

welan

Hi,
I have problems with RB1000 and webproxy, I see that the I/O in the compact flash
produces 100% CPU. Anyone knows how to minimize this?
I have 150 users max, and the CPU goes 100% in about 30 minutes with 20 users.
Many thanks.

welan

Problem solved. Disabled WDS e no default bridge on the wlan where was running pppoe.

Thx!

welan

The ip that you see: 1 D 172.16.28.1/32 172.16.28.140 0.0.0.0 2 D 172.16.28.1/32 172.16.28.125 0.0.0.0 3 D 172.16.28.1/32 172.16.28.102 0.0.0.0 4 D 172.16.28.1/32 172.16.28.133 0.0.0.0 5 D 172.16.28.1/32 172.16.28.112 0.0.0.0 are generated dinamically, every time a cpe was connected to the mt. They ...

welan

Ok, I will answer: This is my /int bridge port print Terminal vt102 detected, using multiline input mode [admin@STUDIO] > int [admin@STUDIO] interface> bridge [admin@STUDIO] interface bridge> port [admin@STUDIO] interface bridge port> print Flags: X - disabled, I - inactive, D - dynamic # INTERFACE ...

welan

Thanks for your answer. The interface connected to the internet is the ether1 (not directly). I will explain better: eg: CPE (172.16.28.124) | | | (WLAN1 WITH PPPOE) | MT1-------------------------(ETHER1 172.16.28.1/24) <------> SWITCH1 <------> (MY LAPTOP 172.16.28.99/24) | (WLAN2 WITH WDS) | | | O...

welan

Hello guys, this is my first post on this board. I have a serious problem with my network! I have a routerboard with 2 wlan and 1 ethernet. I will explain my config: The wlan1 is in bridge mode and it makes a ptp link with another mt. The wlan2 is in ap bridge mode, here are connected the cpe client...

Search found 40 matches