Community discussions

MUM Europe 2020

Search found 6 matches

by MichaelBliss
Fri Feb 24, 2017 10:28 pm
Forum: General
Topic: Traffic shaping
Replies: 3
Views: 1387

Re: Traffic shaping

Wellll, actually that didnt work either, so now I have just 1 queue like this which seems to do the trick. name="LAN2 Queue" target=ether5-LAN2 parent=none packet-marks="" priority=8/8 queue=default-small/default-small limit-at=0/0 max-limit=1M/1M burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
by MichaelBliss
Fri Feb 24, 2017 10:19 pm
Forum: General
Topic: Traffic shaping
Replies: 3
Views: 1387

Re: Traffic shaping

Nevermind, haha, I got it, I wasnt aware that once traffic is processed through a queue the subsequent queues dont apply. So queue 1 LAN2 to LAN1 and queue 2 LAN2 to all traffic.
by MichaelBliss
Fri Feb 24, 2017 9:42 pm
Forum: General
Topic: Traffic shaping
Replies: 3
Views: 1387

Traffic shaping

Hi, been wracking my extremely limited knowledge on this one. I have an RB750 configured as below Port 1 - WAN (PPPOE) Port 2 - LAN1 (192.168.1.0/24) Port 5 - LAN2 (192.168.2.0/24) Currently both LANs can access the internet via Port 1 and can both ping devices within each LAN. What im trying to ach...
by MichaelBliss
Mon Mar 10, 2014 3:40 pm
Forum: General
Topic: v6.10 released
Replies: 248
Views: 84409

Re: v6.10 released

Ive just upgraded to 6.10 on my RB750, now when I disable PPPOE interfaces i lose all connectivity to my router for a minute or so. I have multiple PPPOE ISP accounts and tend to disable and enable interfaces a lot.

Is there a different way that I should be doing this or is this a bug??
by MichaelBliss
Thu Jul 31, 2008 4:57 pm
Forum: Beginner Basics
Topic: What should the throughput be
Replies: 4
Views: 1170

Re: What should the throughput be

133c
Band 2.4 only G
tx/rx Signal Strength -56/-57
noise floor signal to noise 44dB
tx/rx CCQ 83/96%
Overall tx CCQ 83%
Ack Timeout 56 us
Router OS 3.10

Im getting about 3-4 mbs between the 133c and the 333
by MichaelBliss
Mon Jul 14, 2008 11:59 am
Forum: Beginner Basics
Topic: What should the throughput be
Replies: 4
Views: 1170

What should the throughput be

Hi All, I have a RB333 with 2 radios at my main site. 1 Radio has a flat pallen antenna pointing to a high site then through to the rest of my sites (6 sites) The other radio is attached to a Yagi that connects directly to 2 sites. Both connections have good signal strength (-60 to -68) but bandwidt...