No Error! 15:49:19 pptp,info TCP connection established from 19.19.16.207 15:49:19 pptp,info PPP: TCP connection established from 19.19.16.207 15:49:19 pptp,debug,packet PPP: rcvd Start-Control-Connection-Request from 19.19.16.207 15:49:19 pptp,debug,packet PPP: protocol-version=0x0100 15:49:19 pptp...

first, if your clients are end user hosts, you do not need to set up pool for PD. Sorry, i will correct scheme. (PPtP Server) [Mikrotik] <-------( Internet )--------- [Windows 7 Host ] (PPtP Client) If "not need to set up pool for PD" as client will then get the address ? Such a scheme wi...

Hello , help solve the problem . Not binding ipv6 addr on pptp client. My Example: (PPtP Server) [Mikrotik] <------- PPtP --------- [Windows 7 Host ] (PPtP Client) Task: Bind real ipv6 address for the client from pool. My config: Pool: /ipv6 pool add name=IPv6-Pool prefix=2002:c311:11bb:2::/64 prefi...

Hi there! In Feb 13, 2013 i wrote about the problem of connecting the router as a PPPoE client (log attached): Problem with PPPoE Connection . I'm sure if you search you can find more similar topics. With a similar request addressed another person: Feature Request: PPPoE #of PPP LCP ConfReqs before ...

Totally agree!

I wrote about a similar problem with Juniper MX80.
http://forum.mikrotik.com/viewtopic.php?f=1&t=69878

But my message was left unanswered.

The previous version was 6.0rc9 updated by pressing the button "Check for Updates"
What am I doing wrong?

And now as to add additional package PPP?

Where is PPP package?

Good afternoon. There is a problem when connecting to a PPPoE server based on Juniper hardware. Correct to say this is not a problem, but a question of negotiation. In our case, the server is configured with an indication of AC Name (service name). When client connected, the following occurs. 20:02:...

Read on forum http://forum.nag.ru/forum/index.php?showtopic=54586&st=0 that the technology distribution network card interrupts across multiple cores, it works only for incoming TCP/IP traffic and does not work for outbound. That is what I observe. Distribute the load does not get it on an inter...

After switching hypertrading ON and manual purpose interrupts have here is a picture. Membase4.jpeg What's interesting is that, when appointing interrupt 2 on eth1-TxRx-0 load on it is always greater than the core 3, although it appointed more: eth1-TxRx-1, eth1-TxRx-2, eth1-TxRx-3, eth1-TxRx-4, eth...

Thank you, you are fast.

Maybe it is good idea to try to fix this 7 and 4 irq conflicts to avoid rx drops and other problems ?

I have a similar problem http://forum.mikrotik.com/viewtopic.php?f=1&t=49153

/tool profile after manual alignment interrupt per cores the situation has stabilized a bit server.JPG there is a suspicion that the case in network card on the Intel 82576 chip what has caused this behavior to me is completely incomprehensible. My IRQ table /system resource pci> print # DEVICE VEN...

Hardware: Core i7-920 (4 core) Hypertrading off
Try RouterOS 5.0rc7
About 800 PPPoE clients with shapeing

Cpu load (very strange balancing across multiple cores) rapidly increasing number of drop packets for transmission how to correct the situation with the loading cores?

The problem is that you are using different instances for each BGP peer. There should be only one instance.

In my case, each upstream provider has its own instance.
when trying to replace Instance(RouterID) peer goes into state Idle with error log : OPEN error: authentication failure

Hello, help me please. I have a network with three uplinks Mikrotik version 5rc7 Hardware x86 based /routing filter chain=prv-in-demos prefix=0.0.0.0/0 invert-match=no action=accept set-bgp-local-pref=100 chain=prv-in-sovam prefix=0.0.0.0/0 invert-match=no action=accept set-bgp-local-pref=50 chain=p...

Just wondering, are you doing transparent proxying as well? If so, I believe I have seen this issue before.

Snx. Not! Only PPPoE server

Mikrotik RouterOs 3.16 - role PPPoE Server with Quene


PPPoE client - klunker download with speed 5,2 kbyte/s
in Simple Quene - Traffic : 31 kb/s
in Interface statistic: 128 kb/s

Where is real speed?

I know. But in this case involved only one computer. Look carefully at the time 24/08/2008 19:00:00 | dhcp info debug | server-24 assigned 172.31.4.20 to 00:0E:2E:6C:00:00 -> authorized,tested,bound 24/08/2008 19:00:01 | dhcp info debug | server-24 deassigned 172.31.4.20 from 00:0E:2E:6C:00:00 -> bu...

I have some problem "ip assigned", after 0,5 second - "ip deassigned" - but in DHCP-SERVER Lease status "busy" sorry my english so bad. -------------------- Mikrotik RouterOS v.3.13, Pentum 4 1,8 Ghz, Cpu Load 48% 4 - Vlan, 1 - DHCP-Server per Vlan, Abonents over 250