MikroTik

beny30

Thanks for your help. I downgraded to 5.11 and I am back. I before downgrade checked and see that it said e.g. 10 connected clients but no trafic Rx/Tx are zero(0) no trafic at all. I downgrade only RB433 that was making problems to me, that it had 2 WLAN cards one in 2.4 and one 5 (disabled) not in...

beny30

Your'e right but something must be wrong with this version as I told I had even one problem till now? So as a fast fix I will try to downgrade to see if it will work like before. Anyway thanks for your suggestions. And I am busy till the weekend and in order not to let my users without service I wil...

beny30

I upgraded yesterday two of my routerboards and one PC to 5.15 and from that time I get disconnected my PPPoE client and without restart of routers they can not connect. I had no problems till not. I tried to downgrade as it was 5.11 but it does not work I get message you have new packages installed...

beny30

I want to know if there is any script or something like this to redirect users when their limit is near end with User Manager? Script to check User Manager if e.g. time left for one user is les than 3 days for that user there to be in Central Mikrotik a redirect rule to be active for that user in th...

beny30

Does this command compacts database? Will this decrease database size in order to free some disk space isues on RouterBoards?
If not is there any way to free space without losing Users registred in User Manager?

beny30

I there any limit how much to set cache size? Any suggestion?
I see that if cache gets bigger it goes to be slow as bigger you set size browsing will be slower and slower,
Which is best prefered size?

beny30

Again not clear to me. I tried and connected with my own PPPoE connection but at sessions does not shows any session? When I check at users I see that me time is counting down. Does it means that at the same time 20 users can check their status in User Manager web page or generaly only 20 users can ...

beny30

I want to know how many users can I register in User Manager in Mikrotik 4.1 with L4 license,
I see there 20 sessions does it mean only 20 users I can register or only 20 users can check their state through web interface in the same time?

beny30

How to view Caller ID in user manager at user profile web interface, Is it possible or not? I see that you can asign Caller ID through terminal but not through user manager web interface. I have been too asking how to redirect users to any page saying them to pay and not to simlpy disconnect them?

beny30

Hi all I just tried User Manager it looks good but could not find Caller ID when I tried to add any user, I tried RouterOS in x86 with 4.1 v 0 licence level, is there it or I am wrong? I would like to ask you if there is any way to redirect user that spent their credit at any page or it is not possi...

beny30

Can this be done with Radius Menager? If yes where to set this up?

beny30

Here is a log of caching of videos from youtube with Squid and cachevideos: First time 2009-06-27 21:13:45,852 4295 10.100.100.2 - REQUEST - http://v17.lscache5.googlevideo.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag%2Cburst%2Cfactor&itag=34&ipbits=0&signatu...

beny30

Is it possible to setup network in this way?

Infrastructure.jpg

If it is possible any help?

beny30

Can you give a real configuration in more detail it would be very helpfull. How to connect Virtual AP I tried to make 2 Virtual AP in one side and to WDS stations in other side but I could not create Virtual Station WDS, just Virtual APs.

Thanks!!!

beny30

I do it with Ubuntu + Squid not in Mikrotik because is not possible.

beny30

I think you can cache in fact I am doing cache of youtube videos with the help of cache vidoes, and it saves a lot of my bandwidth. Take e look at www.cachevidoes.com Videocache currently supports the caching of dynamically served videos from the following websites 1.Youtube Videos - youtube.com and...

beny30

I want to know if there is a way to set and rule for voice traffice e.g. Skype, WLM, Yahoo msn, Voip programs? It would be good if we could set up priority for voice above other traffic.

beny30

I realize to setup Ubuntu + Squid but I can not limit speed for clients as I do in Mikrotik web proxy. I mean when clients get staf from Internet they to get in with their real speed, e.g. 512 but when to get staff from Squid (cache content) to get with other speed e.g. 1 M. In this case I tried to ...

beny30

I have tried in some ways but does not worked:
EoIP
IPIP
VLAN

Any help?

beny30

Any help???

beny30

Any help?

beny30

I have tried this way but does not work, for me mement the link is in WDS mode do I need to change the mode or it will work and do I need to put any IP in bridge, Wireless interface, Ethernet interface?

Thanks for your help!!!

beny30

Can you give me some advices how to set them up? Do I need bridges? In which mode must be the link for the moment is in WDS can I use it? Do I need to put IP on Wireless or in Bridge or ...

beny30

Thanks for your answer can you help me how to set it up??? I tried to create VLAN on Wireless interface and than it stoped working. VLAN.JPG I created the same in other end but not working, am I missing something? I have created in 2 sides: Right RB: VLAN1(ID=1), VLAN2(ID=2) on 5 GHz interface Left ...

beny30

Thanks for your answer can you help me how to set it up???

beny30

HI all I need some help if it possible to make this configuration: Can I use Poit-to-Point Link for WAN and for LAN in the same time. In the first RB comes main WAN Link (right RB), in the same RB comes traffic for my LAN clients in this RB there are 2 Wireless cards in 2.4 GHz. In the second RB (le...

beny30

Can you give me some help please any example that could help?

Thanks very much...

beny30

Thanks for your suggestion, I have implemented Ubuntu Server and Squid+Cachevideos. It is working perfectly but I have some problems with limiting speed for my users when they download content that is not in cache Squid usese all of my bandwidth I tried to limit speed for squid but than speed of my ...

beny30

Thanks for your help
Mr akmjahangir
Can give me any example how could I make it working and is it secure, this way it looks like more easy than in other way.

beny30

HI all I need some help if it possible to make this configuration: Can I use Poit-to-Point Link for WAN and for LAN in the same time. In the first RB comes main WAN Link (right RB), in the same RB comes traffic for my LAN clients in this RB there are 2 Wireless cards in 2.4 GHz. In the second RB (le...

beny30

HI all I need some help if it possible to make this configuration: Can I use Poit-to-Point Link for WAN and for LAN in the same time. In the first RB comes main WAN Link (right RB), in the same RB comes traffic for my LAN clients in this RB there are 2 Wireless cards in 2.4 GHz. In the second RB (le...

beny30

Which videos can we cache? Youtube, google vidoes, other videos? Can we cache files like with squid?

beny30

I have configured Squid but the mangle rule with DSCP 12 does not count, maybe it is not enogh configured and squid "eats" a llot of traffic, I would like to limit speed of my users for content not in cache to their real speed.
Any help or any Idea is it possible or not?

beny30

Is it possible to configure Squid like Mikrotik Webproxy and limit speed for my users for content from Internet?

beny30

I tried squid but it uses a lot of traffic, can it be configured like Mikrotik webproxy? How to limit speed like in Mikrotik WebProxy with any mangle rule or it is not possible? for content from Internet any way to do it, or can we use parent proxy?
Any idea?

beny30

Is it possible to limit traffice in squid like in Mikrotik webproxy, Squid uses a llot of traffic when downlaoding content, can we limit speed for users for content from internet to their speed for every user in similar way like in Mikrotik or we need to create users in Squid server and there make q...

beny30

HI all, I had problems like this I would say the same problem my router restarted every minut maybe often, when I used PoE. I tried to change cable, adapter but same. After that I used adater jack about 18 W power and now I don't have any problems and I am running without problems for more than a mo...

beny30

My current config is

beny30

I want to know how is minimum signal strength to be in order not to have problems how it does count with noise is it better to be -60 % or -90 %(signal) and the noise how it must be?

beny30

If you have much more stronger signal than in another antena does it not mean the this antena you are using e.g. I tried in antena a I got -83 % I tried in antena b I got -53 % which one to use I think that I am using antena b but not sure.

beny30

I want to connect two networks with Mikrotik 433? What is the best way to set it up with WDS or EoIP. Must one side be AP and the other client, or bridge or how?

beny30

I think you need to check IP Pool leas time, set it to shorter time not llong time because the DHCP will give you the same IP if nobody took it for that time you were offline.

beny30

I just did bridge interfaces and setup a PPPoE Server.

beny30

Can we setup Hotspot and than bind one IP to any web interface of any page of hotspot like wallet garden, for that I am asking not seting up another PC?

beny30

Any help?

beny30

I need help if we can setup any webpage in Mikrotik on the same machine like hotspot (just a simple page) for some users in order to desplay some kind of webpage telling them for their payment and redirect them by any nat rule to this web page in order not to let them to internet. If we can do it ca...

beny30

I want to know if any tried this and does this works with latest versions of Ares and other P2P which is the best method?

beny30

Is there any way to limit traffic for Ares and to give priority for voice?

beny30

I am not clear but as I understood Kernel to must be pached too, and squid too must be pached. I have pached Kernel with ZPH patch, and Squid config with ZPH patch. Check here to see it: http://zph.bratcheda.org/ But problems is what rules to make in Mikrotik to use squid like webproxy in Mikrotik?

beny30

I want to use Mikrotik and Squid Proxy to cache web pages and other content. Can any one help me how to connect them, which is the best and easy way to make them working? I have tried to connect squid on sepeate interface of Mikrotik dedicated for squid but does not work. I have pached Linux Kernel ...

beny30

You can use Teamviewer and it is free and very good.
www.teamviewer.com

beny30

this is my configuration.

beny30

If we use PPPoE How can this be implemented do we need another webserver or we can set up hotspot and than redirect to any of its pages?
Any link or referenc about this thing?

beny30

I have similar configuration but I could not configure it for cache content faster download for content from internet to use there speed?
Mikrotik has three interfaces:
WAN
SQUID
LAN

Squid box has one Interface.

Can any help me ?

beny30

Has anyone implemented this scenario. If yes what rules to make, what mangle rule, what queues?

Any help?

beny30

HI Mr. Normis, Thanks for your answer, but for me is not something clear here? Do I need to make any redirect rule, to redirect HTTP Traffic to squid box. I understad other thins, I worked in Mikrotik webproxy to mark DSCP 4. But here the rules I can create but how to tell that our proxy is squid, d...

beny30

I need help if I can configure web proxy in other server not in Mikrotik, and to work like mikrotik to control speed of users for cache content unlimited speed, for content form Internet limited speed. Any sugestions?

beny30

I want to use Squid like Mikrotik webproxy. I tried with redirect rule but it does not works. Than I tried by putting rules like you suggested and it worked but the speed is very slow. I tried it but users does not have high speed even they use cache content. I would like to use squid as web proxy i...

beny30

I want my users use squid as transparent proxy.

How to configure for cache content users to download with e.g. 512 kbps. But for traffic on the internet with their speed.

What to do?

beny30

Can any help me please what to do exactly on ubuntu is problem on ubuntu or on Mikrotik router that is not working? I have this on Ubuntu server root@10.100.100.2's password: Last login: Fri Jan 23 19:51:48 2009 from 10.0.0.10 Linux proxy 2.6.26.3-custom-zph #1 SMP Wed Dec 10 11:20:09 CET 2008 i686 ...

beny30

Any help?

beny30

Yes I found the solution, and it is working. First make mangle: chain=output action=mark-packet new-packet-mark=proxy-hit passthrough=no out-interface=!WAN dscp=4 Second make simple queue: name="Hit Traffic From Proxy" target-addresses=10.0.0.0/24 dst-address=0.0.0.0/0 interface=all parent...

beny30

Remove IP Pool, or DHCP if there is one.

GO to IP -> DHCP if there is any remove,
GO to IP -> Pooll if there is any remove.

beny30

Check for DHCP Server if they get IP from Mikrotik than there is a DHCP server running on Mikrotik, just disable it and there will be no IP lease to clients.

beny30

My Mikrotik has 5 interfaces: WAN = 192.168.0.2/24 LAN(bride: ether1,ether2,ether3) = 10.0.0.1/24 Squid(ether4)=10.100.100.1/29 From Mikrotik I can ping Squid My Squid has one interface: eth0=10.100.100.2/29 Configuration of squid.conf: acl our_networks src 10.0.0.0/24 acl our_networks src 10.100.10...

beny30

First of all I check my Squid box for configuration and I added default route to squid and now I can ping from my pc to squid. I can ping from squid to Mikrotik, My network, and Internet. I added this two subnets to squid configuration file: acl our_networks src 10.0.0.0/24 acl our_networks src 10.1...

beny30

I have tried this configuration but does not worked? Any other suggestions>

beny30

Thanks very much for your answer. My mikrotik has 3 interfaces: WAN LAN(ether1,ether2,ether3 are bridget) SQUID I am not using any switch, and squid box has only one LAN card. What if Squid has only one interface how to make it work, do I need to create any queue in Mikrotik for squid IP address and...

beny30

Any help?

beny30

Any help

beny30

Any help about this case?

beny30

Let me clear something. My Mikrotik has 5 LAN Ports: WAN, ether1....ether4 ether1-ether3 are Bridge, and I have configured Mikrotik as web proxy. But I want to use my Squid box, it is configured as needed but it does not work. Do I need to set any queue for squid IP, and squid box has only one Lan c...

beny30

I tried this but does not worked.

beny30

I tried this but it does not work for me

I tried to redirect http traffic to squid IP but again not working,

beny30

I did patch Linux kernel, I pached squid with needed patch. I set Squid to work as transparet proxy, I tasted squid putting proxy IP and port in Internet Explorer and it worked perfectly with squid connected in switch with my clients, but after I connected in the second interface of Mikrotik it does...

beny30

Router OS 3.17
Is there any way to give voice high priority than other traffice?
Any suggestions?

beny30

I need help too how to configure in my case how to redirect traffic to my squid box and not to have any limit for that traffic for content on cache bellow is my configuration. INTERNET ----------------MIKROTIK-----------USERS | | | SQUID WAN IP: 192.168.0.1/24 LAN IP: 10.0.0.1/24 SQUID: 192.168.1.2/...

beny30

I could not debug but I tried to use C9 in ap bridge mode and clients get disconnected very often. How can I use it as AP and not have problems do clients "see" if it set to "client" mode?

beny30

I need help to set up my Mikrotik with squid. My configuration is: Mikrotik Interfaces: WAN 192.168.0.1 LAN 10.0.0.0/24 for PPPoE SQUID 192.168.1.2 Squid: Lan 192.168.1.1 I need help how to use squid as transparent proxy what queues to create, what mangle rule te create. I need help about this. From...

beny30

I need help about how to implement external cache+transparent proxy in Mikrotik with 3 interfaces as in the picture, and PPPoE users, any one can help me what rules to create, any suggestions.

Thanks

beny30

I am using PPPoE Server on my mikrotik, any idea how could I configure squid to work in this case, any sugestions?

Thanks in advance

beny30

If I use PPPoE or hotspot how to configure it, tried to patch squid and did it succesfully but after installing it I can not access internet something goes wrong, I says proxy refuzed connections. I am trying to set up squid on ubuntu 8.04. Do I need to patch kernel too in order to work? Does any on...

beny30

OK never mind thanks for your help&advice.

beny30

I have tested this things e.g. if I watch "Bon Jovi -Always" and close it, after let's say a week if I again or any of my users in my network watch the same video they will get it by the speed of my LAN, and they will not use my internet connection.

beny30

I have ubuntu 8.04 and installed is squid-2.6.STABLE18 Can anyone help me hot to patch.

beny30

If banwidth is very expensive than it is very usefull to cache youtube videos or any other flash videos, so if one of my users downloads video flash file why again the same user or other users when download the same file go to internet when they can download from the cache. This is the reason why I ...

beny30

How to disable DNS in Mikrotik, just to unselect "Allow remote requests" ?

beny30

Thank you for your answer, I will try it but firstly I will see to configure Squid in Ubuntu and test it than I will configure rules in mikrotik, it was not clear for me if I must have two interfaces in squid as I see I can use it with one interface. I will see for squid configuration. Thank you ver...

beny30

I am going to ask someone if I can configure Mikrotik with external proxy Squid in Ubuntu. Mikrotik has 3 interfaces: WAN, LAN1(clients), LAN2(squid) Squid has 1 interface LAN I want to know if I can configure Squid as transparnet proxy. Can any one help me in this case, can I configure it or I must...

beny30

I can make Router OS but after I can not connect to it, I would like to have the same interfaces line in Router Host, also in Router Guest in order to copy my current configuration in Guest, and to run. I also plan to install a linux system and than put squid on it to make it web proxy for my client...

beny30

I have one question Can I have the interfaces that I have in host? I have three interfaces:

WAN and LAN(bridge of LAN1 and LAN2) hot to configure them in order to configure the same like masquerade, and other ruls?

beny30

I would ask Mikrotik, to add ability to add specific cache ruls e.g. to cache specifik files even if they expire, or not to cache at all, like other firewall solutions ISA Server, Squid and many others.

I hope they will get this into and add this abilities.

Thanks in advance!!!

beny30

I have added this rule in cache and see hits, but videos are not saved, can Mikrotik team add any rule to overwrite time exire.

I added this rule
add action=allow path=:/.*get_video* and I see that it is counting.

I need a answer from Mikrotik team if they can add this ability to Mikrotik?

beny30

I have a request for Mikrotik team if they can add ability to web-proxy to cache youtube videos like other cache servers, if yes when we can hope for it or is there any way to cache them if yes can you help us how?

beny30

I have a request for Mikrotik team if they can add ability to web-proxy to cache youtube videos like other cache servers, if yes when we can hope for it or is there any way to cache them if yes can you help us how?

beny30

What OS must be installed in order to use squid? Can we add it on Mikrotik as Gest OS?

beny30

I tried to Virtualize RouterOS but had problems to access it, I have 3 LAN Interfaces and I could not have them in Mikrotik guest? I could not get connected with winbox or telnet. I tried to do configuration like in the viki manual but I could not configure. Than I had problems to make most of the t...

beny30

I have two Lan cards bridget so I need to setup unlimited speed between lan users

Thanks njeri

beny30

I need help to set speed for Local LAN for traffic between users. LAN IP range is 10.0.0.0/24

Thanks in Advance?

beny30

Here you can find ways to cache youtube videos with squid
http://wiki.squid-cache.org/ConfigExamp ... nt/YouTube

beny30

I have PC Router with this hardware configuration:
Fujitsu Siemens with Intel P4 2.0GHz procesor
512 MB RAM

And now Winbox does not freeze like before, now most of the time it does not freeze to me, sometimes yes.

beny30

I have upgraded to 3.15 and I am running it for about a week, and I don't see this problem, I have about 50 Users. I monitor interfaces and users get the speed that they have in PPPoE profiles.

beny30

My question is about can we cache youtube videos, in Mikrotik Cache?

beny30

I just checked proxy> chache-contents

And saw that there is the file I donloaded before but when I download the same file again it does not download fastere but with the same speed like from the internet.

beny30

I did it, it counts now too slow but if you look for a long time you see that the numbers change. Do I need to set any simple queue for unlimited traffic from the cache, how to check if they get files faster with LAN speed, how can I check if there are files in the cache?

Thanks in advace

beny30

I have three interfaces: WAN, LAN (LAN1 and LAN2) bridge.

beny30

Thanks Chupaka, but it is not working for me. I want to ask you some questions if you can help me. Do I need to set queue for PPPoE users in profiles or by simple queues? I have configured my router like in this http://wiki.mikrotik.com/wiki/Queue_with_Masquerading_and_Internal_Web-Proxy Do I need t...

beny30

I have the same problems, My Mikrotik Version is 3.13.

beny30

I am using Mikrotik Web-Proxy. Can you help me what rules to create?

beny30

My Mikrotik version is 3.13 and I want to configure PPPoE to have 512/256 traffic. Client IP are 10.0.0.10-10.0.0.100. I want my users to download with LAN speed for web pages and other things that are in cache. I need help to configure that, I tried by simple queue but it is the same I can not down...

beny30

I can not understand this two queues

beny30

If anyone what need to be done or if something is configured wrong pls tell me, why this conf does not work?

beny30

I have Mikrotik v3.10 insalled and configured web-proxy, PPPoE serever. I want to know if I can set limit for content that is in web-proxy, or e.g. Up/Down 512k/1M. My Router has three interfaces: WAN, LAN(LAN1,LAN2 are bridget). I use PPPoE with static queues, Client IP's are 10.0.0.0/24 I tried so...

beny30

I want to know if web-proxy works in 2.9.51 like in 3.x or not?

beny30

I think you can configure in this way as bellow but for TTL I am not sure for the value.

beny30

HI all again, at last I found the problem and now web-proxy is working good.

Bellow is the rule that does not worked for me in it was specified "in interface" and "src address" after I removed them from the rule it worked.

Thanks all for your help.

beny30

I don't have any rule under /ip firewall filter , here is the picture I don't know if you asked for this, Do I need to add any rule if yes can you help me please writting here.

Thank you in advance

beny30

requests and hits = 0

Yes requests and hits all the time it is 0, and when I monitor them I don't see anything in the cache. IP Proxy monitor shows that web-proxy is running for a long time, but not answering any client requests. What to do in this case?

beny30

I have installed v3.10 in my PC, tried to configure transparent web-proxy based in some manuals but it is not working and I don't know why I have L4. Bellow is my configuration that I did. I need help if any can explain me if this rules are OK or not and what need to be done in order to work web-pro...

beny30

Also Simple Queues does not work for me too in 3.14, I did downgrade to 3.10 in order set queues.

beny30

I just installed 3.14 with L4 licence. I have problems with queues now since I installed it I could not limit traffic, users get unlimited traffic? I tried with PPPoE profiles but the same, I tried with simple queues the same? I am very disapointed I bought the new licence in order to get web proxy ...

beny30

Must there be answered requests from clients or other parameter? It shows that web-proxy is running and the time how long it is running, but no answers for clients.

beny30

I want to know where I could see if web-proxy is working or not, and is there in cache anything I don't see any there?

beny30

Thank you for your reply I will check it thanks again.

beny30

Jorj

Can you please write the queue here, which protocol, port, IP range we need to specify?

Thanks in advance

beny30

I have tried to configure transparent web-proxy but it does not answer client request. Below is my configuration.

Do I need to do any aditional configuration in other places, I did configuration based on some manuals from wiki forum but dont see that web proxy is going to work this way.

beny30

I don't know much about Mikrotik, I must look for other solutions than. Thanks for advice.

beny30

I would like to know if it possible to configure transparent proxy in Mikrotik v2.9.27 if yes how we can we do this. I read something that we could configure in v3.0

beny30

I would like to win any licence but I don't know much about mikrotik so I can not win any :( . If I know any thing I would give help to other people why not. Hoping for any licence from any one here...My microtik will be locked soon I just got some help abuot configuring PPPoE and P2P limit in a few...

beny30

Thank you very much for your help sergejs I will see this, thank you again. If I want to exept any user e.g. to let him download more can I use queue simple add target-address=10.0.0.15/32 max-limit=20k/20k will this allow for the user with this IP, and do I need to order them, to put IP with more b...

beny30

Thank you for your answer.

But can you help me by explaining here exact commands that I need to write also the script where can I find, I checked the link but could find something similar to what I am looking for.

beny30

Yes I solved the problem it helped me to configure. Thank you very much for your help.

beny30

I want to limit P2P traffic for all of my users to 10k/10k. How can I configure rules to limit traffice e.g. up/down 10k/10k. My PPPoE have there limit for internet set in PPP profiles but I want to limit P2P traffic for all of them, clients have ip in ranges 10.0.0.10-10.0.0.200 Public interface IP...

beny30

In which cases I can user them I saw them in manual I wanted to limit traffic for all P2P, for my PPPoE users. How can I configure rules to limit traffice e.g. up/down 10k/10k. My clients have ip in ranges 10.0.0.10-10.0.0.200 Public interface IP 192.168.40.2 Local interface no IP How I can limit tr...

beny30

I have some problems I can not use some commands. E.g. mark-flow= it does not work Mikrotik says no such argument (mark flow) why is this? Allso fllow= it does not work [admin@MikroTik] ip firewall mangle> add action=passthrough mark-flow=myusers no such argument (mark-flow) [admin@MikroTik] ip fire...

beny30

I want to know is it needed to setup other ques if we use PPPoE connections, and is there any possible way to seperate equal bandwidth for PPPoE users, like with PCQ how it goes, can any one help me? - How to separate bandwidth for all PPPoE Users equaly? - How to include just specifik users not all...

beny30

I have just installed my mikrotik but now I have some problems. I have configured my PPPoE Server, Profiles, PPPoE Users to connect to my PPPoE server, I have configured my DNS servers, they connect succesfully to my PPPoE Server but I dont have internet, maybe routes problem. I have attached a pic ...

Search found 137 matches