MikroTik

gcsuri

Hi, mAntBox 15ax is a successor of mAntBox 15s (ac or n) . We can not set the existing frequencies and the exitsing tx-power we are using. How Mikrotik thinks that we would migrate our systems to this new ax product line? We can't exchange our AP easily. Mikrotik doesn't tell us that we can't upgrad...

gcsuri

Hi,

after "/system reset-configuration skip-backup=yes no-defaults=yes" an entry remained in the BGP/Templates section with I* status (in winbox).
/export doesn't show anything...

regards, gcsuri

gcsuri

Hi,

I have a simple ospf config in 6.x

/routing ospf network
add area=backbone network=10.1.0.0/16
add area=backbone network=195.219.144.0/22

How can I set it up in 7.x ?

best regards, Gabor

gcsuri

it seems fixed in 7.2rc4

gcsuri

And for inter-VLAN routing you also need
/ip firewall filter
add action=fasttrack-connection chain=forward connection-state=established,related hw-offload=yes

This device doesn't support hw-offload with fasttrack.

gcsuri

Hi, I have installed 7.1.3 to CRS318-16P-2S+. I tried to setup the L3HW interVLAN routing based on the website documentation. I think it doesn't work because I always got high CPU percent. Is it possible on this device? (I tried to enable l3hw on the ether1 also, but doesn't work...) best regards, G...

gcsuri

Hi,

I got OSPF error in log:

12:03:50 route,ospf,info Ignoring Link State Acknowledgment packet: wrong peer state 
12:03:50 route,ospf,info     state=2-Way

How can I detect which peer caused this error? (I have more than 100 device on this network segment)

best regards, Gabor

gcsuri

Hi,

my Powerbox Pro identifies itself to HEX Poe

regards,

hexpoe.png

gcsuri

*) fixed problem where switch locked up after a while and only small packets could be sent;

great, thanks

gcsuri

Hi, it's a simple script to watch the switches: #!/bin/sh HOSTS="10.29.2.12 10.29.2.13 10.29.2.14 10.29.2.21 10.29.2.22 10.29.2.23" function log { if [ -e "/tmp/wdebug" ];then echo -e $1 >> /tmp/wdebug.txt fi } log "watch service started..." while true do for h1 in $(ec...

gcsuri

Hi, one of our CSS326 switch today stopped again... it received and forwarded packets which smaller than MTU 251bytes. Monitoring system didn't alarmed us because of the ping reply... It drives me crazy. I can't believe there is no solution to this BUG! you may ... 1., remove this bug 2., develop a ...

gcsuri

Hi, I have some CSS326 on latest swOS. Today one of them is hanged up. I could ping it, snmp is worked, but no traffic, no web interface. Port 80: $ telnet xxx.9.2.22 80 Trying xxx.9.2.22... Connected to xxx.9.2.22. Escape character is '^]'. help HTTP/1.0 400 ERROR Content-Type: text/html Connection...

gcsuri

Hi,

I upgraded a HAP lite 6.38 to 6.46.2 and I can't login with winbox (3.20) anymore. I can login with mac-telnet and telnet but winbox tells me bad username/password. I downgraded to 6.44.6 it works again.

best regards, Gabor

gcsuri

Hi, I need to setup a IPSEC VPN with the following requirements: - windows-7/10 clients ( w/ builtin VPN client ) - user auth with username/password (and PSK) - push more LAN subnet I have setup l2tp/ipsec successfully but I couldn't push routes. I switched to ikev2, made certs based on the Wiki but...

gcsuri

Hi,

I would like to use LHG60 as PTMP AP and some LHG60 as client.
How many clients can I connect to an AP?
Do I need a simple L4 license to the AP?
The clients are nearly in a line. What maximum distance I could except to the AP?

best regards, Gabor

gcsuri

Hi,

connected: yes
frequency: 58320
remote-address: 04:D6:AA:A7:MN:S7
mcs: 8
phy-rate: 2.3Gbps
signal: 80
rssi: -60
tx-sector: 22
tx-sector-info: right 1 degrees, down 0.6 degrees
distance: 539.35m

with rc56 random disconnections gone.

gcsuri

Hi,

do you plan to develop the port knocking feature in?

best regards, Gabor

gcsuri

Hi,

thank you for the answers!
I installed a fresh Fedora 28 then the problem disappears

gcsuri

Hi, I got "Windows Wine Loader is not responding" on each start, but after about 5sec is responding. I would take a try on a fresh Fedora 28. Anyway: creating Window Class routeros_null creating Window Class routeros_connect creating Window Class routeros_dbl_canvas discovery started resca...

gcsuri

Hi, I'm on Fedora 27. Winbox starts with delay and CPU goes to 100% for about 5 sec then everything is normal. I think it happens because of discovery. Does anybody get the same thing? How can I start it without discovery? (when I start it with an IP address and password in arguments the discovery d...

gcsuri

Hi,

do you have any news about the eoip issue?

best regards, Gabor

EoIP Ethernet Frame issue is still there (introduced in 6.42 breaking fragmenting big frames somehow broken) verified on RB2011 and sent supout to MT-support.

gcsuri

Hi, I think I found the problem... Between B and C I have a Racom ray2 24G bridge. It doesn't forward BPDU packets somehow. So C, E and F has an other root bridge in the same bridge... Next night I will enable RSTP in racoms (although doc says racom forward BPDU packets transparently when rstp is di...

gcsuri

Hi,

thank you for your answer!
I have already modified the path costs.
I tried to change the root bridge to B or C but I got loop always when I put more than 1 backup link.

regards, Gabor

gcsuri

Hi, I have this topology: RTSP.png This is a bridged net with RSTP. I would like to use dashed lines as backup links. When I put the main links to the bridges it works well. When I put BD link - B bridge marks BD path as alternate root and it works well. When I put the CD port to the bridges it logs...

gcsuri

Ok, the problem solved. Thank you for the support! Problem was (is) that the packets which are going to the ppp interface go to the default gw. This happens because the ppp interface doesn't exists yet (for example on startup) and "bad" item created in the connection tracking table. When t...

gcsuri

Hi, I have some pptp connection to my router: Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 1 XX.63.44.57/30 XX.63.44.56 sfp1 5 10.100.0.1/24 10.100.0.0 bridge_intra 8 D 10.201.0.1/32 10.201.0.26 <pptp-ppp_dxxxx> 9 D 10.201.0.1/32 10.201.0.32 <pptp-ppp_exxx> 10 D 10.201.0...

gcsuri

Hi,

I have a working openvpn server on 750G 4.16 . I have to change this to 1100x2AH but I can't move the certificate to the new device.
Could you help me to move the certs, please?

Thank you, Gabor

gcsuri

Hi All, could you add a "skip" option to netwatch system, please? So when netwatch pings a host and sometimes it has a timeout the host goes down immediately... and goes up on the next ping. It occurs because of a transmission timeout or something else but the host doesn't inaccessible. If...

gcsuri

Try decrease the power... but I think that 6 dBm is the min. power.

gcsuri

Hi,

I had some issue with my RB750G's ports. Try to remove the switch configuration from the device (remove Master port settings). It helped for me.

regards,

gcsuri

In fact I want to transport TDM over IP (TDMoIP). Does MikroTik support this one ? Hi, I have E1 transmission with the following configuration: E1 - IPMUX-2L - RB433AH - - - 3km- - - RB433AH - IPMUX-2L - E1 I'm using nstreme-dual link between the RBs. Transmission is rock solid, has 322 days uptime...

gcsuri

yes, via ftp. all packages w/o calea, gps, ipv6, hotspot, ups and user-manager.

gcsuri

Hi, I've just upgraded from v5beta6 to rc6 and my 532 board not boot: RouterBOOT booter 2.18 RouterBoard 532 CPU frequency: 399 MHz Memory size: 32 MB Press any key within 2 seconds to enter setup.. loading kernel from nand... OK setting up elf image... OK jumping to kernel code Kernel panic - not s...

gcsuri

Hi,

is there any plan to extend the speed limits of an interface to 15, 20, 25 or random limit?
What type of limiting method used for this interface-limit?
What type of limiting do you recommend to use a 20Mbit limit not to eat too much CPU?

regards,

gcsuri

it works, thanks

gcsuri

Hi,

I've already registered the remote MAC address. Why any wds parameter depends on the band?

regards,

gcsuri

Hi, I have a working 5GHz-turbo wds link: [admin@MikroTik] > /interface wireless print detail Flags: X - disabled, R - running 0 R name="wlan1" mtu=1500 mac-address=00:0X:XX:XX:XX:XX arp=enabled interface-type=Atheros AR5413 mode=ap-bridge ssid="xxx" frequency=5800 band=5ghz-turb...

Search found 37 matches

mAntBox 15ax superchannel is missing...

Re: v7.7rc is released!

7.x OSPF [SOLVED]

Re: CRS318 and L3HW routing

Re: CRS318 and L3HW routing

CRS318 and L3HW routing

OSPF wrong peer state

Re: v6.47.1 [stable] is released!

Re: SwOS version 2.12 released!

Re: CSS326-24G-2S+RM hangs until power cycle

Re: CSS326-24G-2S+RM hangs until power cycle

Re: CSS326-24G-2S+RM hangs until power cycle

Re: v6.46.2 [stable] is released!

IPSEC IKEv2 eap?

LHG60 PTMP

Re: LHG 60G experience

Re: Winbox v3.15 released!

Re: Winbox starts not so easy on wine [SOLVED]

Re: Winbox starts not so easy on wine

Winbox starts not so easy on wine [SOLVED]

Re: v6.42.1 [current]

Re: RSTP loops

Re: RSTP loops

RSTP loops

Re: problem with NAT on tile

problem with NAT on tile

Certificate export

Re: Feature requests

Re: NetMetal 5 bandwidth-test

Re: RB750 problem

Re: E1 Transmition Via MikroTik Wireless

Re: v5rc6 released

Re: v5rc6 released

interface bandwith limit

Re: 5GHz wds mode doesn't work

Re: 5GHz wds mode doesn't work

5GHz wds mode doesn't work