hi, i read the manual about traffic flow with NTop. but i don't find the manual about configure MT with NTop.
can someone show me how to configure traffic flow in mikrotik with NTop....?
i'm using MT 2.9.46
1. how to use bandwidth-test in mikrotik tool....? 2. i want to ask what is load-balancing ....? i've been searching the internet for load-balancing in mikrotik and i found very diffrent info about load-balancing. is it like this = a. when router 1 down and then router 2 will take charge (VRRP) or b...
You are below the router. There is no way you can see client ip address. Unless you put proxy under the LAN itself. yes, the proxy server can not see the client ip address because the proxy server is below the router but when i set the clients to enter the proxy manually, the proxy can see the clie...
im sure it is, however you have much greater risk of corrupting that file since you are writing to it so often. You also will wear-and-tear your flash card much faster.
ouw thx for a quick respons..! :shock: mikrotik can do this....!!!! can u pliss help me how to do this...? nb: - mikrotik webproxy transparent enable = yes - proxy server transparent enable = yes when a client try to browsing through proxy server, and i opened the access-log in proxy server the ip c...
oh now i see the diffrent..... thanks dude
so i must install the webproxy-test and uninstall the webproxy then.....
is there any problem when i do that...?
cause there are like 150 clients using this router...
radius server..?
i dont seems to find how radius can limit download,upload & browsing in separate way...
i've tried queue tree & simple queue, but they limit all the packet that through port 80.
hi all..! i have a question to ask, can mikrotik : 1. limit a user for download 2. limit a user for upload 3. limit a user for browsing pliss need help.....? thx for advanced
hi all... i got a problem here.......: here r my spec = for the PC = 1.P4 2,3 Ghz 2.256 DDR 3.40 GB HD 4.5 Ethernet for the config = 1.i bridged 4 ethers ( for local network) - ether 1 = Game - ether 2 = Office - ether 3 = IT - ether 4 = Server 2.i used 1 ether for public - ether 5 = Public here is ...
@tneumann sorry i've forgot to mentioned the ip.....
okay here is the ip =
ether 1 = blank ip
ether 2 = blank ip
ether 3 = blank ip
bridge 1 = 192.168.10.2/16
hi all i got this configuration on my mikrotik machine= ether 1 = reply-only (local) ether 2 = reply-only (local) ether 3 = enabled (local) all in one bridge = enabled (192.168.10.2) what i want to achives r = 1. all the computers that connect through ether 1 & ether 2 must assign their ip &...
okay here r the all most configration : mikrotik1 = ether1 -> 10.10.9.99/16 (local) ether2 -> 202.165.xxx.xxx (global) gateway -> 202.165.33.xxx (cisco gateway) mikrotik2 = ether1 -> no ip (bridge1) ether2 -> no ip (bridge1) ether3 -> no ip (bridge1) ether4 -> no ip (bridge1) bridge1 -> 10.10.10.99/...
hi im having a small problem, i just setting a new mikrotik (2.9.27) and i want to connect with my other mikrotik (2.9.7) here r the ip config = mikrotik 1(2.9.7) = ether 1 -> 10.10.0.xxx (local) ether 2 -> 202.165.xxx.xxx (global) mkrotik 2(2.9.27) = bridge1 -> 10.10.0.xxx (i connected 4 ether with...
once again thx for quick respons cmit, okay ive got this problem on friday and its make all the internet connection goes crazy:evil: and i was trying to found out what in the hell went wrong with my network, after 3 hours figuring out then i found the mystery of it , some one in my office was using ...
i got 2 router, the first router with ip (10.10.1.1) and my second router is (10.10.1.1). the ip will be conflict and the router will disconnect.......my question is how to avoid the ip conflict....???
thx cmit but when i import it says : " Script file loaded and executed successfully input does not match any value of interface " and when i open the /ip arp nothing added...... :( note : my first router have a diffrent configuration & device with my second router........!!!
okay heres my configuration that i want to achive: ether 1 - with ip = 10.10.1.1/255.255.0.0 (local) (reply only) ether 2 - with ip = 10.10.2.1/255.255.0.0 (local) ether 3 - with ip = 10.10.3.1/255.255.0.0 (local) ether 4 - with ip = 202.165.x.x (global) what i want to is all ether can connect each ...
@sten can i delete the bridge (that connected all the ether) and set all the 4 ether with specified ip....with the same subnet..and i want all the 4 ether are connected?? i've try this one but all the 4 ether cannt connected!!!
thx for all the answers, but i just want to export /ip arp list.....how to export it from one mikrotik to other mikrotik....??? i've try the export thing, but when i open the file type is script....!!!
interface-bridge-filter>add chain=forward in-interface=lan1 out-interface=lan2 src.address=192.168.10.0/24 dst.address=10.10.15.0/24 action=drop note : i got 4 ether and i bridge all when i apply the rule the 192.168.10.0/24 still can connect to 10.10.15.0/24.....???? is something wrong with my rule...
@joeri91942 thx for the info......it'ss my mistake here is my new network design..... now i have 5 ether ether 1 - > 10.10.0.251/16 (static clients / IP Local) ether 2 - > 202.165.x.x/24 (IP Public) ether 5 - > DHCP (IP Local) i use bridging for ether 1-4..... i use difrent bridging for ether 5 (cau...
@janisk thx for the respons......... here are the detail........ i have 3 ethernets with the config : 1. ether1 - ip (10.10.0.251/16) - subnet (255.255.0.0) - static IP 2. ether2 - ip (10.10.13.2/16) - subnet (255.255.0.0) - static IP 3. ether3 - ip (192.168.4.1) - subnet (255.255.0.0) - dhcp IP wha...
anyone can tell me how to setup a DHCP server & client...? in specific plis... i've read the manual 10 times maybe more.....but i still cant make the client connect..... for the information= i used the 2.9.27 version i have 2 ethernet 1 for local -> 10.10.0.0/16 1 for internet all with a static ...
hi to all MT man i have a small question but biger problem...! i have a 6 interfaces in my new router...... what i want to do is: 1.each interface can only be access with a various ip...example= ether 1 = ip:10.10.1.x/16 -> only ip with 10.10.1.x(client) can access this network ether 2 = ip:10.10.2....
okey now when i disabled the redirect to port 8080.......
i cant browsing the internet......!
port 8080 is my proxy port......
...
and when i disabled the proxy same thing happen......!
....
.......
@cyb.0rg you want to access router using winbox or teknet.......! if you want to use winbox in conect to:x.x.x.x/(port of hotspot u set for the default is 8081). if you want to use telnet dont forget to enable port 23. you want to ping from where and to where....? make sure u setup the interface and...
cyb.0rg
surely u will disconnect after u setup hotspot,u need to login to winbox something like this: connect to:x.x.x.x(router ip)/8081(default hotspot port).
cause hotspot will create a new port to let u login...!
i mean its 100% working....!
no problem until now....!
my questions is why i cant just drop all other port insted moving to src-address-list.....!
makes me so confused.....
i think M2.9.6 bandwitdht limiting still having saome problem......!
i follow the manual 100% not working......!
when will the bandwidth limiting works prefectly.....!
thx for the answer......im sorry i did spesifik the protocol soo this is my original script....: ip firewall>add src-address=10.10.0.0/16 protocol=tcp dst-port=!80 action=drop chain=forward still port 80 also drop......? :( @normis yes i want to let other port to allow like 25 n 110 but i want some ...
hi.....is it mikrotik v2.9.6 bandwidht limit still having a problem...! cause ive tried as in manual and it works fine in one hour after that the problem comes......! :( please mt man this bandwidth limiting is very important.........can u all fix it up....! :idea: :idea: :idea: :idea: :idea: thx
@netcomp do you having problem with webproxy.....
cause i do.
why is that when the webproxy running normal then about 1 week after suddenley it wont work...!
ip webproxy access>add url=".com" action=deny dst-port=80(block all that endup with com) or u can spesifik each website ip webproxy access>add url="www.xxx.com" dst-port=80 action=deny i think u cant blok a specifik url because u can still visit the url by using http://www.jayuz....
i've got 3 router 2 mikrotik (a and b) 1 cisco router in my office....! mikrotik b is for experiment and mikrotik a is the real thing..! i set ARP=reply-only the problem is when i go to ip arp so many ip r shown (dynamic) means: the ip that i write in arp n from the other routers.....are shwon why i...
@dannyboy i've done this and its work: rule forward: add src-address=10.x.x.x/16 protocol=tcp dst-port=80! action=drop/reject it means that all port except port 80 will be drop/reject...... i think blocking the port is more effesiens more than have to block by the name of the p2p because more p2p pr...
mmmhhhhh....is p2p can be block...?
there are many p2p program that can change their port right...!
such as imesh,lime wire,etc.....
but if the p2p use port 80 how to block them......?
does mikrotik have all the list of p2p program.?
okay....theres is a way....! but you need to install hotspot first! if you already install it...then: 1.erase all the rule in dst-nat. 2.write the ip you want to acept in forward place in top,i forget how to count a range ip..! 3.then write this rule if your client have to login first in login page:...
why is it when everyone asked something that they dont know, they(MT man)
always says "read the manual..." r everyone have the same brain...!
please....mt man not all people r expert like urs..!
i've already read the manual 100 times....!
i know im no good for upgrade....! cause im just n ordinary person...i wont upgrade cause i still wnt to learn more about mikrotik and what can mikrotik do... and i think in this forum all the user must always upgrade the mikrotik if the user want to answers their questions..... why can we all just ...
i've try to set the network queue in wan...but nothing happens still the same..? :( you said i must set in wan and not in global-out..? is it in global-out or wan that i have to queue...? :shock: and in monitor-trafic which interface to view the queues..is it wan(public) or lan(local)..? what is the...
need help please..... im using mt v2.7 i want to make 2 network : 10.10.1.0/16 and 10.10.2.0/16 with a diffrent config. 10.10.1.0 (dynamic) bandwidth 120kbps 10.10.2.0 (dynamic) bandwidht 128kbps i've already done this: 1. (in queue simple) /add dst-address=10.10.1.0/16 interface=lan max-limit=120 w...
hi... im a new user of MT im still using MT v2.7.14 i want to use v2.8 but i dont have a serial number (to full version) this r my problem : 1. sometime my mt cannot connect to the dns server n local network 2. can a client browsing the internet without need entering their username and password 3. c...