Thanks for the update. Not going to read all those posts. But scanning the solutions, still seems as much more difficult than before and for what purpose?

Why is there a password from the factory? We've had an automated script for a very long time that logs into the new router, sets all parameters including SSIDs and SSID passwords and system passwords.

Now we have to manually enter the factory password? Any way around this?

Thanks

Tried changing the use-network-apn=no and use-network-apn=yes. There was no difference.

All suggestions presented so far are already tried or are in place. We have tried the broadband and nxtgenphone (apn apn=NXTGENPHONE name=lte1). Again this was working until we changed out the sim card. Thanks in advance. Here is the config /interface bridge add name=bridge1 /interface lte set [ fin...

We recently replaced an ATT SIM card in our RBLtAP-2HnD. The card is registering on the ATT network and the connection info looks solid, There is a VPN set up and the receiving router - In the log we can see something trying to connect from and ATT IP. ( the connection only happens when we restart t...

bump please

We are using Sonar. Every time it connects to a router the syslog is recording "user sonar logged in from xxx.xxx.xxx.xxx via api". It logs in every 3 minutes so our log list is full of this. How do we write a logging rule to eliminate those entries? We have tried dozens of rules utilizing...

They are 250 miles away hoping to upload the firmware.

Been awhile since updating that far back. We inherited a dozen devices - 750s and 912s. Wasn't there a warning about updating to far forward? As though we needed to step up to 6.33 before attempting later like the stable version now?

Thanks

Sorry no. [admin@MikroTik] > :local serial ([/system routerboard get serial-number]) [admin@MikroTik] > [admin@MikroTik] > /interface wireless security-profiles add authentication-types= wpa2-psk \ \... management-protection=allowed mode=dynamic-keys name=Serial \ \... supplicant-identity=MikroTik w...

Thanks to all that submitted the security profile script, lots of good folks here. But none of the emails we received addressed the dynamic SSID incorporating a portion of the serial number.

We are needing a script added to our config file for the Mikrotik routers we sell to our WISP and Cable System customers. Needs to pull part of the serial number and create a unique SSID and adds the serial number to the Security Profile WPA2 preshared key. Please IM or email me admin@cobasystems.ne...

Have you thought of using ping to monitor if the device is active or not? Also if the device is directly connected to an interface of mikrotik you can check with a script if the interface on witch the device is attached is running or not with the command: /interface ethernet get "interface_nam...

We have a device that pulls a DHCP IP but is not SNMP capable. So we thought a work around might we could monitor the ethernet port on a Mikrotik router to make sure it is active with the device connected. If the connected device losses power we would want to know that it is no longer connected.Is t...

Windows 7 Professional 64 bit

After downloading the current and bug fix versions of the Dude Client for Windows and attempting to install it we get an error message "Error Opening file for writing" Options are abort, retry or Ignore. This happens on both Cure=rent and bug fix versions. I have even tried opening the dow...

Were using hoffman boxes we picked up recently. 2 - 6" fans in a 30 x 12 x 24 box

We have created a vpn to the office router R751 from a laptop computer. Laptop 10.10.65.17 - router side 10.10.65.16. What we are wanting is to be able to access files on the office computers. The office computers can see each other's files and printers. The laptop sees other computers and printers ...

not a problem, feel free to pm me if you have any more questions :). We are using the solar site to control the stock water for cattle wirelessly :). Very interested in your design!. Can you please provide a bit more detail on your solar solution? What size of mppt charge controller? Do you have in...

Connected to the ether 1 port is the poe. We can only access the RB via serial cable. Once logged in everything looks OK just no data through the ether 1 port. We have tested the cables by swapping out the board, so its not in the cables. We tried disabling and enabling the port still doesn't work. ...

Found the error. Fixed it THANK YOU! Worked great.

Thanks for the suggestion. Yes the users are numbered 100 through 300. I tried your script and it came back with ah syntax error (line 1 column 30)

I have 300 users in our hotspot. They are all set to default profile. I am trying to find a way to change users 100 through 200 to a different profile named - "basic" - without having to click on each one in winbox. Is there someway easier in console? Frustrated trying to type one command ...

We are trying find a solution that allows clients in a hotel to connect to the Hotspot when they have a static ip already set on their wireless interface / card. This would allow them to connect regardless of the IP scheme they have. I'm guessing it has something possible with the Hotspot DHCP IP be...

I have remote property with an 433ah acting as the main router. There are 2 other APs that are networked via wireless backhaul. I can mac telnet into the secondary APs from the main AP just fine. How do I FTP into the secondary APs? I have tried forwarding port 21 to a specific APs' IP but that does...

We have installed the dude on a remote 432 that is monitoring 3 other APs. We installed the Dude on an extra computer in the office. We are trying to add the remote 432 as an agent under server configuration. When it tries to connect, it displays a "version mismatch" in the status column. ...

Good idea for a new manual! Sometimes confusing.

Thank you again for responding.

Thank you for responding. We were able to locate another computer, install the target drive and boot from the cd. Once the hard drive was formatted and the 3.14 OS was installed we moved the hard drive back to the computer we will be using as the router. Turned the unit on but no DHCP and a few othe...

I searched the previous posts and tried all their suggestions. But hanging up at Waiting for Drivers. I burned the 3.14 ISO to a thumb drive. The computer boots to the USB first. I started Netinstall on another computer on the same subnet. Gave the client computer in Netinstall Net booting configura...