Community discussions

MikroTik App

Search found 83 matches

by mktwifi
Wed Mar 08, 2023 4:30 pm
Forum: Forwarding Protocols
Topic: BGP peering not working with routeros 7.6
Replies: 4
Views: 2620

Re: BGP peering not working with routeros 7.6

Post the configuration otherwise we can't help you.. We have several Juniper/Mikrotik BGP sessions on ROS 7.7 and 7.8 and they work fine HI Here it is: # mar/08/2023 15:16:55 by RouterOS 7.8 # # model = CCR2004-1G-12S+2XS # /routing bgp template set default as=11111 disabled=no hold-time=3m multiho...
by mktwifi
Fri Mar 03, 2023 1:09 pm
Forum: Forwarding Protocols
Topic: BGP peering not working with routeros 7.6
Replies: 4
Views: 2620

Re: BGP peering not working with routeros 7.6

I've just tried to upgrade RouterOS with version 7.8 but problem is the same: peering BGP with a juniper router does not go up :-(
by mktwifi
Fri Mar 03, 2023 12:58 pm
Forum: Forwarding Protocols
Topic: BGP peering not working with routeros 7.6
Replies: 4
Views: 2620

BGP peering not working with routeros 7.6

Hi guys I hope somebody can help me. Yesterday I upgraded a CCR204 with RouterOS version 7.6. and, after that, one of the BGP peering went DOWN. I checked configuration and is exactly the same as versione 6.48.6, then I try to contact our carrier and they told me that they didn't see any BGP connect...
by mktwifi
Fri Dec 02, 2022 9:52 am
Forum: General
Topic: Apple CNA doesn't show up
Replies: 9
Views: 3823

Re: Apple CNA doesn't show up

We finally found the cause of all headaches.
There is a file called api.json inside the new standard hotspot folder, that triggers the Apple Cna.
With it, it pops up.
Without it doesn't.
Please document this in the guides guys, otherwise, engineers like us will get sick.
by mktwifi
Thu Sep 01, 2022 10:11 am
Forum: General
Topic: Apple CNA doesn't show up
Replies: 9
Views: 3823

Re: Apple CNA doesn't show up

Just a quick update for you guys.
Randomly Apple disables this option, If this is turned off, CNA will not appear at all:
20220830-110745_090122_091249_AM.jpg
by mktwifi
Mon Aug 29, 2022 5:21 pm
Forum: General
Topic: Apple CNA doesn't show up
Replies: 9
Views: 3823

Re: Apple CNA doesn't show up

Just a quick update, we found that the main cause of this was due to the old HTML template used.
We reset the HTML inside the Mikrotik and with the basic one it works.
We are working to "migrate" our template with the new schema.
Enjoy.
by mktwifi
Fri Aug 19, 2022 1:15 pm
Forum: General
Topic: Apple CNA doesn't show up
Replies: 9
Views: 3823

Apple CNA doesn't show up

Hi All, we encountered a strange issue that is causing headaches to our clients. We configure the hotspot radius service within a Custom HTML directory and at the first iOs SSID join, a device shows the customised CNA. That's great, but now the problem. Once a user comes back again and rejoins the s...
by mktwifi
Thu Apr 28, 2022 1:19 pm
Forum: General
Topic: serial number meaning
Replies: 4
Views: 1122

Re: serial number meaning

I thought that part of code was related to the batch of boards produced or something similar..

Thanks
by mktwifi
Wed Apr 27, 2022 4:46 pm
Forum: General
Topic: serial number meaning
Replies: 4
Views: 1122

Re: serial number meaning

Hello Normis, thanks for the answer 123456789ABC = this is the SN. it's random. Also this part is sometimes different between label on router and label on cardboard box. Why this is not true, unless you bought a used device with mixed up boxes I've received a Mikrotik package with 20 hAP Lite 941-2n...
by mktwifi
Wed Apr 27, 2022 3:20 pm
Forum: General
Topic: serial number meaning
Replies: 4
Views: 1122

serial number meaning

Hello, I've noticed that the serial number retrived from the OS and also scanning the data matrix doesn't contain the last 7 digits present on the label, e.g. SN: 123456789ABC/123/rN the part after and comprising the / doesn't appear. Also this part is sometimes different between label on router and...
by mktwifi
Tue Jan 18, 2022 6:10 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223442

Re: v7.1.1 is released!

Hi All,
HTTPS within the HOTSPOT service doesn't work anymore.
Upgraded from 6.79.2 to 7.1.1 no changes in already working Hap Lite, now I get Handshake failure.
Downgraded and it works back again.
Hotspot is an issue in general since ROS 7.
now it works back with 7.2 rc1.
by mktwifi
Tue Jan 18, 2022 3:57 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223442

Re: v7.1.1 is released!

Hi All,
HTTPS within the HOTSPOT service doesn't work anymore.
Upgraded from 6.79.2 to 7.1.1 no changes in already working Hap Lite, now I get Handshake failure.
Downgraded and it works back again.
by mktwifi
Thu Oct 22, 2020 10:13 am
Forum: General
Topic: Radius, WPA2 EAP and bandwidth limit
Replies: 6
Views: 2552

Re: Radius, WPA2 EAP and bandwidth limit

NothinG?
by mktwifi
Thu Oct 08, 2020 1:08 pm
Forum: General
Topic: Radius, WPA2 EAP and bandwidth limit
Replies: 6
Views: 2552

Re: Radius, WPA2 EAP and bandwidth limit

I've finally achieved this by enabling tunneled reply in my freeradius. Now a strange behavior incurs: Mikrotik-rate-limit works only for downstream. Upstream bandwidth seems unlimited. Here is my freeradius attributes response: Fotografia_dello_schermo_100820_035252_PM.jpg Here is my Gw situation: ...
by mktwifi
Wed Sep 23, 2020 4:33 pm
Forum: General
Topic: Feature request:RADIUS mikrotik-rate-limit also applied for eap/802.1x caps-man users
Replies: 3
Views: 1428

Re: Feature request:RADIUS mikrotik-rate-limit also applied for eap/802.1x caps-man users

Hi
I would like to have the same on WPA Enterprise. Not to have to use radius on DHCP.

Please add the possibility to use radius attribute like Mikrotik_Wireless_VLAN_ID, speed, ecc.

Thanks

Best regards
by mktwifi
Fri Mar 10, 2017 4:03 pm
Forum: General
Topic: 3G connection disconnects every 1 minute with GPS package enabled
Replies: 1
Views: 586

Re: 3G connection disconnects every 1 minute with GPS package enabled

Only to add more informations: I noted that, when the 3G connection is disconnected, the usb port under /system port is red
Immagine 18.jpg
Any help is appreciated

Best regards
by mktwifi
Fri Mar 10, 2017 1:28 pm
Forum: General
Topic: 3G connection disconnects every 1 minute with GPS package enabled
Replies: 1
Views: 586

3G connection disconnects every 1 minute with GPS package enabled

Hi Support I have a Mikrotik RB951ui-2hnd with a Huawei E173 modem connected to the USB port. The problem is that if I install and enable the GPS package the 3G connection is disconnected every 1 minute, instead if i disabled the GPS package the 3G connection stay up without problem. I tried with Ro...
by mktwifi
Wed Feb 11, 2015 5:21 pm
Forum: Wireless Networking
Topic: hiding the MAC addrees?
Replies: 11
Views: 6686

Re: hiding the MAC addrees?

You connected cable to port 2 or 3 of RB433? Are the ports bridged or switched? No, I'm connect to one of the client with RB411 or RBSXT not to the RB433. Please have a look to the attached schema. The configuration of all the devices is as mantioned before. Solved. I've only activated the rule cha...
by mktwifi
Tue Feb 10, 2015 4:54 pm
Forum: Wireless Networking
Topic: hiding the MAC addrees?
Replies: 11
Views: 6686

Re: hiding the MAC addrees?

You connected cable to port 2 or 3 of RB433? Are the ports bridged or switched?
No, I'm connect to one of the client with RB411 or RBSXT not to the RB433. Please have a look to the attached schema. The configuration of all the devices is as mantioned before.
by mktwifi
Tue Feb 10, 2015 2:37 pm
Forum: Wireless Networking
Topic: hiding the MAC addrees?
Replies: 11
Views: 6686

Re: hiding the MAC addrees?

1. please don't raise very old topics. this discussion was from 2007. 2. do you connect with wire or wireless when you see the other devices? procedure will be different Sorry if I raised a very old topic. I connect with wire to the antenna where i disabled neighbor discovery and than I open winbox.
by mktwifi
Tue Feb 10, 2015 1:38 pm
Forum: Wireless Networking
Topic: hiding the MAC addrees?
Replies: 11
Views: 6686

Re: hiding the MAC addrees?

disable neighbor discovery in RouterOS I tried to disable neighbor discovery in RouterOS but it didn't work. Doing so winbox doesn't show the router mac address where i disabled neighbor discovery but continue to show all the other mac address of the other equipements connected to the same network....
by mktwifi
Tue Apr 09, 2013 1:36 pm
Forum: General
Topic: PPPoE server routing problem
Replies: 0
Views: 838

PPPoE server routing problem

Dear guys! I have configured a Mikrotik core router as PPPoE Server that acts as a concentrator for our WiFi clients that have a router (Linksys, D-Link, etc) configured as PPPoE Client. Our clients have a public IP on WAN interface of their router and a private IP on LAN interface, then on router i...
by mktwifi
Wed Feb 15, 2012 9:33 am
Forum: General
Topic: Data from unknown device, sent deauth
Replies: 3
Views: 3112

Re: Data from unknown device, sent deauth

Any help, please?

Thanks

Best regards!
by mktwifi
Fri Feb 03, 2012 1:28 pm
Forum: General
Topic: Data from unknown device, sent deauth
Replies: 3
Views: 3112

Data from unknown device, sent deauth

Dear guys! I have a Hyperlan network with some Mikrotik AP; in this AP there are two or three radios and I use access-list to permit link to one radio rather to the others. Now problem is that, sometimes several CPEs disconnect from AP and it try to connect to other radio that isn't present in acces...
by mktwifi
Tue Oct 04, 2011 5:08 pm
Forum: General
Topic: NV2 and ping problem
Replies: 0
Views: 1041

NV2 and ping problem

Dear guys! Today I have installed ver 5.7 of routerOS on one of my AP and on all CPE that are connect to this AP. Then I enabled NV2 protocol on AP and on CPE side I set wireless-protocol to any. After that, traffic of AP goes down to 0 Kbps, all CCQ of link decrease from ~90% to 30%, TX/RX Rate goe...
by mktwifi
Fri Sep 16, 2011 5:00 pm
Forum: General
Topic: Total Queue isn't equal of TX/RX rate ethernet
Replies: 16
Views: 7192

Re: Total Queue isn't equal of TX/RX rate ethernet

Hi guys!
Sorry for delay...but I found my problem: some of my network address weren't on address-list of firewall and so their traffic didn't mark and didn't went through queue.
So there was my problem on configuration of my traffic shape router.

Sorry!

Best regards!
by mktwifi
Tue Sep 06, 2011 6:00 pm
Forum: General
Topic: Total Queue isn't equal of TX/RX rate ethernet
Replies: 16
Views: 7192

Re: Total Queue isn't equal of TX/RX rate ethernet

Hi guys! And so why is there this big difference from queue average rate and ethernet or mangle rate? In this moment (see image below) queue average rate is 66,6 Mb and current rate (ethernet and mangle) is about 80 Mbps. On queue tree I set max limit of download queue at 66 Mbps, and so I think to ...
by mktwifi
Tue Sep 06, 2011 10:54 am
Forum: General
Topic: Total Queue isn't equal of TX/RX rate ethernet
Replies: 16
Views: 7192

Re: Total Queue isn't equal of TX/RX rate ethernet

I have smaller traffic on queue than on WAN interface (eth6), instead traffic on WAN interface is equal of traffic on LAN interface... so for me there is some problem on queue because also mangle traffic is equal of WAN and LAN traffic.

Best regards
by mktwifi
Thu Sep 01, 2011 9:40 am
Forum: General
Topic: Total Queue isn't equal of TX/RX rate ethernet
Replies: 16
Views: 7192

Re: Total Queue isn't equal of TX/RX rate ethernet

In my situation problem is different: ethernet packets and rate are bigger than total_queue packets and rate (see last image) and so I would know why.

Anyone could help me?

Thanks in advance

Best regards
by mktwifi
Tue Aug 30, 2011 10:21 am
Forum: General
Topic: Total Queue isn't equal of TX/RX rate ethernet
Replies: 16
Views: 7192

Re: Total Queue isn't equal of TX/RX rate ethernet

Hi! I have just tried to add queue with parent global-in, but also with parent global-out, and no-mark. Avg-rate is 0, so mangle-rules for mark packets are OK, and problem is on queue... I check also, on statistics of total_queue and public ether, packets un bytes and they are different when instead...
by mktwifi
Fri Aug 26, 2011 5:44 pm
Forum: General
Topic: Total Queue isn't equal of TX/RX rate ethernet
Replies: 16
Views: 7192

Re: Total Queue isn't equal of TX/RX rate ethernet

Sorry, but I don't unerstand "try to add one more queue with parent=global-in and routing-mark=no-mark...". ether6 is interface direct connect to my xDSL router and I don't use web proxy and NAT Queue Avg rate of queue with packet-marks set is OK and it is equal to statistics rate of mangl...
by mktwifi
Thu Aug 25, 2011 7:24 pm
Forum: General
Topic: Total Queue isn't equal of TX/RX rate ethernet
Replies: 16
Views: 7192

Re: Total Queue isn't equal of TX/RX rate ethernet

Thanks chupaka.
No, packet rate isn't equal. So which is problem?

Thanks

best regards
by mktwifi
Thu Aug 25, 2011 9:49 am
Forum: General
Topic: Total Queue isn't equal of TX/RX rate ethernet
Replies: 16
Views: 7192

Total Queue isn't equal of TX/RX rate ethernet

Dear Guys! I have Mikrotik router with one port linked to public internet connection and other three ports linked to my networks. On this router I have configured traffic shaping (not transparent) with mangle rules with packet-mark, and queue-tree. All is working but I don't understand why Avg Rate ...
by mktwifi
Thu Jul 14, 2011 9:52 am
Forum: General
Topic: BGP Soft-reconfiguration on mikrotik
Replies: 1
Views: 900

BGP Soft-reconfiguration on mikrotik

Hi guys! I have to configure CISCO soft-reconfiguration comand on Mikrotik RouterOS ver 5.5; how can i do this? I have read this wiki http://wiki.mikrotik.com/wiki/Manual:BGP_soft_reconfiguration_alternatives_in_RouterOS but there is only an explanation of difference from static and dynamic soft-rec...
by mktwifi
Thu Jul 07, 2011 12:34 pm
Forum: RouterBOARD hardware
Topic: Wireless N card help
Replies: 13
Views: 2376

Re: Wireless N card help

Hi! Thank you very much Uldis. I change wireless card on both end and I look tx/rx signal strength value on "Registration" tab. On wireless configuraton I use "Configured" data-rates and I check all "supported rates A/G" and "Basic rates A/G" for wireless card...
by mktwifi
Thu Jul 07, 2011 11:29 am
Forum: RouterBOARD hardware
Topic: Wireless N card help
Replies: 13
Views: 2376

Re: Wireless N card help

OK, but why R52N&R52HN signal strenght is 10 dBm less than R52H? It could be about 2 dBm and not 10, or not?

Thanks

Regards
by mktwifi
Thu Jul 07, 2011 10:52 am
Forum: RouterBOARD hardware
Topic: Wireless N card help
Replies: 13
Views: 2376

Re: Wireless N card help

Just only 2 dBm, and so why R52N&R52HN signal strenght is 10 dBm less than R52H? It could be about 2 dBm and not 10, or not?

Thanks

Regards
by mktwifi
Thu Jul 07, 2011 10:26 am
Forum: RouterBOARD hardware
Topic: Wireless N card help
Replies: 13
Views: 2376

Re: Wireless N card help

Hi!
Could you tell me which is the huge difference please?

Thanks

Regards
by mktwifi
Thu Jul 07, 2011 9:59 am
Forum: RouterBOARD hardware
Topic: Wireless N card help
Replies: 13
Views: 2376

Re: Wireless N card help

Hi! Where is difference? Is this? R52H @ 54Mbps @ 20 Mhz -> TX Output: 20 dBm Sensitivity: -70 dBm R52N @ 54Mbps @ 20 Mhz -> TX Output: 16 dBm Sensitivity: -77 dBm R52HN @ 54Mbps @ 20 Mhz -> TX Output: 18 dBm Sensitivity: -77 dBm There is only difference of 2/4 dBm, and so I don't understand why I h...
by mktwifi
Wed Jul 06, 2011 4:18 pm
Forum: RouterBOARD hardware
Topic: Wireless N card help
Replies: 13
Views: 2376

Re: Wireless N card help

Hello! With R52N and even with R52HN I have -62 dBm on tx and rx signal, instead with radio R52H I have -52 dBm using same PacWireless antenna on same position. Why? I think this is a hw radio problem, or not? This is problem that i had with R52N http://forum.mikrotik.com/viewtopic.php?f=3&t=345...
by mktwifi
Wed Jul 06, 2011 1:33 pm
Forum: RouterBOARD hardware
Topic: Wireless N card help
Replies: 13
Views: 2376

Wireless N card help

Dear guys! Which are the best N cards to use with RB433 and RouterOS? Last year I tried R52N but I didn't obtain good throughput, and last month I tried R52HN with NV2 but I had problem with signal strenght that was about 10 dbm less than signal with R5H. I think to try ubiquity SR71: is it OK with ...
by mktwifi
Fri Jul 01, 2011 12:01 pm
Forum: General
Topic: Problems with OSPFv3 in 5.0
Replies: 7
Views: 3260

Re: Problems with OSPFv3 in 5.0

Hi!
Upgrade firmware doesn't resolve this issue.

Thanks
by mktwifi
Fri Jul 01, 2011 11:56 am
Forum: General
Topic: Problems with OSPFv3 in 5.0
Replies: 7
Views: 3260

Re: Problems with OSPFv3 in 5.0

Dear guys!
Any news about this issue? I have same problem after upgrading to routerOS ver 5.5 and only in one routerboard, why?
Could be a firmware problem? Now I try to upgrade firmware and I hope....

Thanks in advance

Best regards
by mktwifi
Wed Jun 08, 2011 11:10 am
Forum: RouterBOARD hardware
Topic: Block p2p traffic
Replies: 11
Views: 4228

Re: Block p2p traffic

Dear Guys!
Could you post L7 rexexp for HTTPS and EMULE please?

Thanks in advance

Best regard
by mktwifi
Tue Jun 07, 2011 7:11 pm
Forum: General
Topic: how block connection of p2p?
Replies: 291
Views: 196019

Re: how block connection of p2p?

Dear Guys! I have just tried to configure mikrotik transparent traffic shaping for limit P2P traffic but without success. I have used TKITFrank configuration to mark P2P traffic then I have created queue tree for limit bandwidth but P2P traffic goes through router without any limit. Could you check ...
by mktwifi
Mon Jun 06, 2011 3:53 pm
Forum: General
Topic: Station-pseudobridge CPE block entire network
Replies: 11
Views: 4128

Re: Station-pseudobridge CPE block entire network

Dear guys!
Today, after a storm, I have same problem: two mikrotik CPE block entire layer2 network. I sniff traffic and problem is same: duplicate IP address...

Do you have some news about this problem?

Thanks for help

Best regards
by mktwifi
Mon Jun 06, 2011 3:46 pm
Forum: General
Topic: NV2 on AP decrease CCQ and TX/RX Rate
Replies: 3
Views: 2232

Re: NV2 on AP decrease CCQ and TX/RX Rate

Hi!
Thanks for reply! There is always traffic on all wifi link to AP.

Regards
by mktwifi
Fri Apr 29, 2011 4:33 pm
Forum: General
Topic: NV2 on AP decrease CCQ and TX/RX Rate
Replies: 3
Views: 2232

NV2 on AP decrease CCQ and TX/RX Rate

Dear guys! Today I have installed ver 5.2 of routerOS on one of my AP and then I enabled NV2 protocol on it (on CPE side I set wireless-protocol to any). After that, all CCQ of link decrease from ~90% to 30% and TX/RX Rate goes down to 6Mbps: why? Could someone help me? In AP side there isn't any No...
by mktwifi
Wed Nov 10, 2010 1:31 pm
Forum: General
Topic: routeros on non mikrotik motherboard - what is good stuff
Replies: 9
Views: 2508

Re: routeros on non mikrotik motherboard - what is good stuf

Dear guys!
I also have reboot problem on RB600 and i have tried, as suggest normis, to load firmware 2.27 but problem persist. I think I have to change routerboard with another one or is it possible to solve?
I have also upgraded routerOS to version 5.0rc3.

Thanks in advance

Best regards
by mktwifi
Fri Nov 05, 2010 1:28 pm
Forum: General
Topic: Install RouterOs on LinkSys WRT54GL
Replies: 1
Views: 4910

Install RouterOs on LinkSys WRT54GL

Dear Guys! I would install RouterOS on LinkSys WRT54GC: is it possible? If yes, how can I do it?

Thanks in advance

Best regards
by mktwifi
Thu Nov 04, 2010 11:25 am
Forum: General
Topic: Station-pseudobridge CPE block entire network
Replies: 11
Views: 4128

Re: Station-pseudobridge CPE block entire network

Sigh! Today, also with wds on bad CPE, problem is the same. I don't know what to do...the only way is remove bad cpe and install another one.

Any help is appreciated

Thanks in advance

Best regards
by mktwifi
Wed Nov 03, 2010 3:42 pm
Forum: General
Topic: Station-pseudobridge CPE block entire network
Replies: 11
Views: 4128

Re: Station-pseudobridge CPE block entire network

I hope that Mikrotik support or someone resolve this strange issue: I think that it is a RouterOS problem on station-pseudo-bridge, because if configure bad CPE with station-wds all works OK.

Thanks in advance

Regards
by mktwifi
Wed Nov 03, 2010 11:19 am
Forum: General
Topic: Station-pseudobridge CPE block entire network
Replies: 11
Views: 4128

Re: Station-pseudobridge CPE block entire network

Our network has more or less 1000 CPE divided in 10/11 networks configure in routing mode. I have this problem only from three months and in two networks where there is mikrotik AP and mikrotik CPE. I don't have problem in network where there are Alvarion AP and Alvarion CPE. Please help me... Thank...
by mktwifi
Fri Oct 29, 2010 7:07 pm
Forum: General
Topic: Station-pseudobridge CPE block entire network
Replies: 11
Views: 4128

Station-pseudobridge CPE block entire network

Dear guys, I have just posted this problem but anyone help me. I have a bridged network with one RB433AH configure in AP-bridge and 90/100 clients configure in station-pseudobridge; sometimes, one mikrotik client freeze entire network (wireless still connected, but I could not ping router behind mik...
by mktwifi
Thu Oct 07, 2010 6:18 pm
Forum: Wireless Networking
Topic: (HELP / ASK) IP Conflict after HIT by Lightning (with pic)
Replies: 11
Views: 3756

Re: (HELP / ASK) IP Conflict after HIT by Lightning (with pi

Any help?
I try disabling Default forward on AP-BRIDGE and on Access-list of AP, but problem is the same.

Need help please

Thanks in advance
by mktwifi
Thu Oct 07, 2010 6:16 pm
Forum: General
Topic: Bad CPE bringing down entire network.
Replies: 5
Views: 2116

Re: Bad CPE bringing down entire network.

Help please!
Today I send a message to support@mikrotik.com and I hope to receive an answer soon.
I try disabling Default forward on AP-BRIDGE and on Access-list of AP, but problem is the same.

Need help
by mktwifi
Mon Oct 04, 2010 7:24 pm
Forum: General
Topic: Bad CPE bringing down entire network.
Replies: 5
Views: 2116

Re: Bad CPE bringing down entire network.

Hy guys! Does anyone resolve this problem? I have same problem on bridge network where there are 80/90 Mikrotik client (all station pseudobridge). I try to upgrade router os on client that freeze entire network, but problem is the same; i try to change radio MAC ADDRES but nothing. The only way to r...
by mktwifi
Mon Oct 04, 2010 7:13 pm
Forum: Wireless Networking
Topic: (HELP / ASK) IP Conflict after HIT by Lightning (with pic)
Replies: 11
Views: 3756

Re: (HELP / ASK) IP Conflict after HIT by Lightning (with pi

Dear guys, sorry for delay....I try to change MAC-ADDRESS only after that I have problem and not first, so duplicate IP address is not generate from change of MAC. Our network is already in route mode, and I have this problem in 3 different bridged network: one netowrk has 20 host, the other one has...
by mktwifi
Thu Sep 23, 2010 10:46 am
Forum: Wireless Networking
Topic: (HELP / ASK) IP Conflict after HIT by Lightning (with pic)
Replies: 11
Views: 3756

Re: (HELP / ASK) IP Conflict after HIT by Lightning (with pi

I also think there is problem in RouterOS, but i try to upgrade to version 4.10 and 4.11 client that generate this problem but nothing. I also try to change MAC ADDRESS of wlan1 but nothing. The only way to resolve problem is change mikrotik client with another one. I have this problem three time in...
by mktwifi
Tue Sep 21, 2010 5:53 pm
Forum: Wireless Networking
Topic: (HELP / ASK) IP Conflict after HIT by Lightning (with pic)
Replies: 11
Views: 3756

Re: (HELP / ASK) IP Conflict after HIT by Lightning (with pi

Hy guys! Does anyone resolve this problem? I have same problem on bridge network where there are 80/90 Mikrotik client (all station pseudobridge) and 2/3 mikrotik that act as ap-bridge. I try to upgrade router os on client that freeze entire network, but problem is the same; i try to change radio MA...
by mktwifi
Tue Jul 13, 2010 9:34 am
Forum: General
Topic: Ethernet problem on Nexcom
Replies: 6
Views: 1364

Re: Ethernet problem on Nexcom

No, an IP address for each interface!

Regards
by mktwifi
Fri Jul 09, 2010 7:31 pm
Forum: General
Topic: Ethernet problem on Nexcom
Replies: 6
Views: 1364

Re: Ethernet problem on Nexcom

Perfect! With routerOS 5.0 beta4 now I see all 4 ethernet interfaces.
But I have another problem: if I configure an IP address for each interface and i connect a pc, I have a ping reply only from ether4 and not from ether1, ether2 and ether3: why?

Thanks in advance

Best regards
by mktwifi
Fri Jul 09, 2010 3:41 pm
Forum: General
Topic: Ethernet problem on Nexcom
Replies: 6
Views: 1364

Ethernet problem on Nexcom

Hi guys, i have purchased a Nexcom DN1110 embedded system with four 82801H (ICH8 Family) pci-express ethernet ports, and I have installed RouterOS Ver 4.10 for x86 system. Problem is that I don't see any ethernet port on RouterOS interface. I think because RouterOS doesn't have driver installed: is ...
by mktwifi
Mon Jun 28, 2010 11:38 am
Forum: The User Manager
Topic: Access UserManager from Hot Spot interface
Replies: 13
Views: 11715

Re: Access UserManager from Hot Spot interface

Hi guys,
i resolve problem! I insert ether IP address into walled-garden.

Thanks

Best regards
by mktwifi
Mon Jun 28, 2010 11:30 am
Forum: The User Manager
Topic: Access UserManager from Hot Spot interface
Replies: 13
Views: 11715

Access UserManager from Hot Spot interface

Dear guys, I have configured an HotSpot system using wiki tutorial, and then I have configured userman for manage user. My problem is that i can access to http://ether_router_IP/userman but I can't access to http://hotspot_router_IP/userman: why? How can I access to userman from hotspot interface? I...
by mktwifi
Mon Jun 07, 2010 12:21 pm
Forum: General
Topic: AirGiga router shutdown and freeze
Replies: 9
Views: 2743

Re: AirGiga router shutdown and freeze

OK! Thanks for ethernet registration, but shutdown problem persist. I connect monitor and keyboard to AirGiga router but when it freezes and shutdown I don't see nothing in the monitor.

Please help me.

Thanks

Best regards
by mktwifi
Mon Jun 07, 2010 11:26 am
Forum: General
Topic: AirGiga router shutdown and freeze
Replies: 9
Views: 2743

Re: AirGiga router shutdown and freeze

x86 system is an Intel 1600 MHz processsor with 2 Gbyte DDR RAM and four ethernet port that are registerd (with "R" in winbox interface) even if there aren't connect to any device: why?

Best regards
by mktwifi
Mon Jun 07, 2010 10:49 am
Forum: General
Topic: AirGiga router shutdown and freeze
Replies: 9
Views: 2743

Re: AirGiga router shutdown and freeze

There is an x86 system

Regards
by mktwifi
Mon Jun 07, 2010 9:35 am
Forum: General
Topic: AirGiga router shutdown and freeze
Replies: 9
Views: 2743

AirGiga router shutdown and freeze

Dear guys, i have purchased AirGiga router with RouterOS Ver. 3.30 and I have imported on it a traffic shaping configuration (transparent mode) that I did on a Mikrotik RB493AH. Now problem is that when I use new AirGiga router instead of RB493AH, AirGiga router after 1 or 2 minutes freezes and shut...
by mktwifi
Fri Sep 04, 2009 5:51 pm
Forum: RouterBOARD hardware
Topic: Throughput and CCQ decrease when traffic increase wireless N
Replies: 13
Views: 4417

Re: Throughput and CCQ decrease when traffic increase wireless N

Hi,
I am using a 5 Ghz frequency, and I have just tried a lot of frequency with same result.

Regards
by mktwifi
Wed Sep 02, 2009 7:06 pm
Forum: RouterBOARD hardware
Topic: Throughput and CCQ decrease when traffic increase wireless N
Replies: 13
Views: 4417

Re: Throughput and CCQ decrease when traffic increase wireless N

Hi guys, this morning I tried, in an indoor test environment, with other two routerboard (RB433AH) with wireless N card (R52N) without antenna connected and I didn't have CCQ and througthput problem: I had 120 Mbps TCP aggregate througthput! Then this afternoon I install the routerboard RB433AH in a...
by mktwifi
Tue Sep 01, 2009 6:13 pm
Forum: RouterBOARD hardware
Topic: Throughput and CCQ decrease when traffic increase wireless N
Replies: 13
Views: 4417

Re: Throughput and CCQ decrease when traffic increase wireless N

Hi guys, today I try, in an indoor test environment, with other two routerboard (RB411) with wireless N card and a 17 dbi flat panel antenna on each side (so with only one chain enable) but problem persist: when traffic increase ccq and througthput go down! I think it is a RouterOS or a R52N problem...
by mktwifi
Mon Aug 31, 2009 3:28 pm
Forum: RouterBOARD hardware
Topic: Throughput and CCQ decrease when traffic increase wireless N
Replies: 13
Views: 4417

Re: Throughput and CCQ decrease when traffic increase wireless N

And so, what is the problem?
Is there anyone that has this problem?

Help please

Regards
by mktwifi
Mon Aug 31, 2009 1:20 pm
Forum: RouterBOARD hardware
Topic: Throughput and CCQ decrease when traffic increase wireless N
Replies: 13
Views: 4417

Re: Throughput and CCQ decrease when traffic increase wireless N

Also with UDP traffic there is ccq and througthput decrease problem.
Could be a routerOS problem? Or a dualpol antenna isolation problem?

I hope someone help us.

Regards
by mktwifi
Fri Aug 28, 2009 1:30 pm
Forum: RouterBOARD hardware
Topic: Throughput and CCQ decrease when traffic increase wireless N
Replies: 13
Views: 4417

Throughput and CCQ decrease when traffic increase wireless N

Hi guys, i have a ptp link with two RB600 with R52N card and two Pac Wireless dual polarized antenna: signal is good (about -65 dbm) and also CCQ and throughput (see wirelessn1.jpg) but when i execute a bandwidth test (not from routerboard but from two PC that are connected directly on routerboard),...
by mktwifi
Thu Mar 05, 2009 9:33 am
Forum: RouterBOARD hardware
Topic: Backup and restore configuration
Replies: 3
Views: 2290

Re: Backup and restore configuration

OK, and so? Did you not answer to my question about radio configuration?

Please help me

Regards
by mktwifi
Wed Mar 04, 2009 7:04 pm
Forum: RouterBOARD hardware
Topic: Backup and restore configuration
Replies: 3
Views: 2290

Backup and restore configuration

Hi Guys, I have made a backup configuration of RB433AH with two radio (one XR5 and one R52H) and with 3.18 routerOS version. Then I have made a restore on RB600 with two radio (one XR5 and one R52H) and with the same routerOS version. Now I have these problems on radio configuration: 1) Interface na...
by mktwifi
Tue Dec 02, 2008 10:01 am
Forum: RouterBOARD hardware
Topic: POP3, SMTP, IMAP4 enable on Mikrotik routerboard
Replies: 4
Views: 5429

Re: POP3, SMTP, IMAP4 enable on Mikrotik routerboard

I use routerboard in bridging mode in a point-to-point wireless link and so I wouldn't use firewall rules.
Why does Dude software find pop3, smtp and IMAP4 service active in routerboards? Is it possible to disable this services?

Thanks

Best regards
by mktwifi
Mon Dec 01, 2008 6:06 pm
Forum: RouterBOARD hardware
Topic: rb600 make reboot every day
Replies: 106
Views: 24903

Re: rb600 make reboot every day

Does someone resolve this problem? I have same problem on RB600 and RB600A and if I disable watchdog RB600 breeze and the only way is to reboot it.

I hope that Mikrotik resolve this problem because I have 20 routerboard RB600.

I have just tried firmware 2.13 and all routeros version.

regards
by mktwifi
Mon Dec 01, 2008 1:18 pm
Forum: RouterBOARD hardware
Topic: POP3, SMTP, IMAP4 enable on Mikrotik routerboard
Replies: 4
Views: 5429

POP3, SMTP, IMAP4 enable on Mikrotik routerboard

Hi guys, I do a service scan on Mikrotik routerboard with a software (GFI Lan Guard) and it find POP3, SMTP, IMAP4 service enable on routerboard: why? I check under IP/service of routeros but I don't find any smtp,pop3 or imap4 service. Also with Dude if i try to check a routerboard it find smtp,pop...
by mktwifi
Tue Nov 11, 2008 10:01 am
Forum: RouterBOARD hardware
Topic: TX Power problem with XR5 Ubiquiti card
Replies: 4
Views: 2827

Re: TX Power problem with XR5 Ubiquiti card

I try to contact Ubiquiti support (bad support) but they tell me that they are not able to replicate problem and that they think it is a RouterOS problem.

I have this problem in all my PP link with XR5 cards!

I think I have to substitute all my XR5 cards with r52!

Thanks

Regards
by mktwifi
Thu Oct 16, 2008 3:31 pm
Forum: RouterBOARD hardware
Topic: TX Power problem with XR5 Ubiquiti card
Replies: 4
Views: 2827

Re: TX Power problem with XR5 Ubiquiti card

I try with different type of router OS (3.1,3.7,3.10,3.14) but result is the same. With tx-power less than 15 dBm I can't make link!

Please help me or I have to put in trash all my ubiquiti XR5 :( !

Thanks a lot!
by mktwifi
Wed Oct 15, 2008 9:55 am
Forum: RouterBOARD hardware
Topic: TX Power problem with XR5 Ubiquiti card
Replies: 4
Views: 2827

TX Power problem with XR5 Ubiquiti card

Hello, I've just installed 3 p2p link with RB600 with XR5 cards and in all link I can establish it only if I set tx-power upper 15 dBm or if I set tx-power to default (I have 32 db antenna and distance is about 15 Km). I read on web that XR5 cards have an offset of 10 dBm and so if I set 10 dBm on t...