MikroTik

ilero

We want to authenticate wireless users associated to a MikroTik AP based upon MAC address and have FreeRadius return VLAN attributes for that user. We want to avoid using VirtualAPs. Is this possible? If so, what are the specific radius attributes that MikroTik will accept for VLAN assignments? Thanks

ilero

* Is it possible to run this devices with a Radius Server for Authentication AND assign every user to a different VLAN? * yes normis - How is this done? We want to authenticate wireless users associated to a MikroTik AP based upon MAC address and have FreeRadius return VLAN attributes for that user...

ilero

yes...

I can send e-mails to other addresses. But it appears that i can't send emails to addresses with numbers in them???

ilero

Running v2.9.50 When I type the following command: tool e-mail> send to=5738640001@cingularme.com subject="test" OR tool e-mail> send to="5738640001@cingularme.com" subject="test" The e-mail does not get sent and I get the following error message in the log: system erro...

ilero

tgrand - I am having the same issues... Did you ever resolve this?

ilero

Follow-up question...

Since the RouterOS is acting as the Dude Host, what happens when the RouterBoard looses power? Does it loose all of the history?

ilero

Using RouterOS packages... On the login screen for the dude, no matter what username or password I enter, it just "spins". It never even says the username/password is incorrect. I have tried admin/no password and also my username/password for winbox. On the login screen for User Manager, I...

ilero

OK... So I discovered that RouterOS v3.0rc2 contains the Dude as a package. This is great!!! I then tried to access it by going to xx.xx.xx.xx/dude in my web browser. It brought up the Dude login page, but no matter what username/password I use, it just stalls and goes nowhere. Any ideas? Is is a bu...

ilero

For over a year, there has been mention of the Dude as a RouterOS package. Is is available yet? If so, which version?

I am asking because I have a number of remote locations that I prefer not to install a Windows machine.

Thanks

ilero

How can I do this??

ilero

We have a few other locations that we use an external hotspot page along with radius. None of these users (250+) have to type in "@domain" at the other sites since the external hotspot page adds it to their username. At this location, we already have a number of local users (not via radius...

ilero

I am currently using v2.8... I need our clients to be able to just type in "username" instead of "username@domain". I tried to do this by using the following in the login.html file: <input type="hidden" name="domain" value="domain"> By looking at the...

ilero

When I first startup the dude it starts to show the real-time rx/tx on the network map, but then after about 5 seconds all of them disappear. When I try to change the settings on any of the links, it does not allow me to select an interface for SMNP. I never had this issue with v.91 and earlier. It ...

ilero

Any thoughts??

Is there a firewall rule that I can use to make this happen?

Thanks

ilero

I just upgraded from 2.8.28 to 2.9.11 and I am running Hotspot. I use an external radius server with a 3rd party to authenticate username/password. The radius server has worked great with 2.8, but for some reason I can not get it to work with 2.9. Two questions: (neither one of these were options in...

ilero

I just upgraded from 2.8.28 to 2.9.11 and I can no longer access port 80 from outside of the network (running Hotspot). I have been used to doing this in 2.8 so I can remotely troubleshoot any problems with the login. Is this because 2.9 IP Service does not have a Port 80 listed? This is the IP Serv...

ilero

Anyone????

ilero · 2.8.26

2.8.26

ilero

When I click on tools and Winbox, I am unable to successfully login when the MT has Hotspot running. I need to have it access port 8081. Is there somewhere to change this setting in the Dude for MTs running hotspot?

ilero

We have been experiencing the same issue when we turn on load balancing. Configuration: Public Interface#1 - Wireless Connection (multi-meg) with a Static IP address Public Interface#2 - Cable Internet Connection with DHCP Client enabled It appears that end-users' connection is successfully load-bal...

ilero

If I used one remote Windows machine and connected to all of the individual networks via VPN (could be 5-10 VPN sessions or more), could I run the Dude client on another machine and connect to that server? I can set the VPN client to auto-reconnect, but I am concerned that when the VPN client is los...

ilero

I have multiple independent networks deployed primarily at MDUs. To monitor all of them, will I have to place a Windows machine inside of each network running the Dude server? Or is there another option to monitor the networks all of the time without having to install Windows machines?

Thanks

ilero

Is there any plans in the near future to graph history of probes (ie. bandwidth graphs for past and present)? Similiar to MRTG graphs...

Thanks

ilero

When I run hotspot on 2.8.26 with radius on a single internet connection everything works fine; but when I try to load balance, radius does not respond. For users already authenticated, the load balancing works fine, but there is no response from radius for authentication (:1812) and accounting (:18...

ilero

Does MikroTik have the ability to inform the radius server when the accounting is on or off due to system restart or unexpected outages? The company that hosts our radius server stated that as long as our MT will send an attribute to tell them that our radius accounting is on or off, then it will &q...

ilero

Thanks for the detailed info...

I am currently running 2.8.28, but I do not see the "always broadcast" feature. Is it only available in 2.9?

Thanks

ilero

First off - We have had our primary wireless network up a running for over two years with multiple clients utilizing CB3s, SmartBridges, and standard wifi clients. We utilize MT as the router and SmartBridges as APs. Now to the issue - We just bought a Tranzeo TR-80 to try out since they are very in...

ilero

I am currently using a RB512 with a CM9 as a 5Ghz Station. But for some reason, after I changed the Band to "5GHz" under the wireless settings, the status tab still says "Band: 2.4Ghz". I discovered this after I could not get this one client in a PTMP to associate to the RB512/CM...

ilero

Can anyone answer this? I, myself, have previously asked this question, but I never received a response...Thanks

ilero

Guy - Thanks a lot for your feedback. I was able to get MRTG working using your suggestion of entering the specific OIDs. I really appreciate it...

ilero

I do not have any other SNMP program to try it out. I am currently polling (3) other MikroTiks the same way. Here is my config file (which is the same template that works for all of the other routers): # Created by # ./cfgmaker --global 'workdir: /home/httpd/mrtg' --global 'options[_]: bits,growrigh...

ilero

My server appears to be polling my MT (2.8.26), but it is not pulling any bandwidth data. In other words, my MRTG graphs does not show any data, but the stats continually show an updated time. I am using the same basic config file on my other MT's and they are working just fine: 2.8.19, 2.8.2, and 2...

ilero

I have worked with MT as a router for a couple years, but I have never set it up as an AP or station.... When I am setting up a MT as an AP, do I create a Bridge interface that includes ether1 and wlan1? And what interface do I set up the "management" IP on (the Bridge, wlan, or ether1)? S...

ilero

It is impossible mark packets twice. The most effective way to authenticate using Hotspot and also shaping traffic is to use two separate MTs - one for the authentication and the other one as a bridge to shape the traffic.

ilero

I am using hotspot to authenticate all of my users. I have the following setup: MT -- 5 port switch -- (3) Smartbridge APs I have disabled the client-to-client communications directly in the APs, but this does not prohibit a client of the one AP to communicate with a user of another. How can I isola...

ilero

What method does the MT use to determine that the user is still connected? I know it is not via pinging since I am not able to receive a response from a number of our clients since their routers are set not to respond to ping requests - but those customers still stay connected. I am asking this sinc...

ilero

We are using all wireless - 802.11b. We will be using approx 20 APs throughout the apartment complex.

ilero

We are deploying a wireless network within an MDU. We plan to use hotspot authentication with radius. Since it is an amenity to all of the tenants, we do not plan to timeout anyone unless they disconnect. There could be 500+ concurrent users at any one time. We have looked at the Nomadix box, but we...

ilero

edzix, I use the Hotspot enabled method for my users. I also would like to have the ability to select certain customers that can bypass the hotspot login page without using other authentication methods like PPPoE. Just to clarify, I would use the action accept for the above rule? And, I do not have ...

ilero

I have attached the export of my firewall settings below. I am running hotspot and PPPoE on the same interface. The specific client trying to use VoIP receives a public IP address via PPPoE. The client does not do any additional NATing. Also, as I mentioned earlier, whether the user is a hotspot (wi...

ilero

I tried to enable upnp feature, but it did not fix the problem. Vonage states that I need to make sure the following ports are open.: 53, 69, 123, 5060,5061, 10000-20000 (All UDP). Again, the user is assigned a public IP address through PPPoE and he cannot use our service to connect to Vonage. Vonag...

ilero

I currently have a MT running hotspot and PPPoE. One of the PPPoE users is trying to use his Vonage VoIP device. For some reason, the device will not work when he is connected to our network. I have verified that I am not blocking any of the UDP ports that are needed for the Vonage service. What am ...

ilero

The setting is within the Hotspot Profiles. The default is one concurrent login, but just type in the total amount of logins that you want to allow to be used at the same time under "Shared Users."

ilero

How about adding a self-signup page which authenticates the user via CC authorization?

ilero

I would like to be able to select the number of consecutive pings that Netwatch sends out instead of relying on a single ping timeout. We all know that it is common for just about any device to miss a ping occasionally. But, if we could set Netwatch to ping the device, say 3 times consecutively, and...

ilero

Edzix,

Thanks... And yes, you are correct - It is just now been two months.

Just a quick question: Will this software interface with a Radius server or directly with a Mikrotik?

ilero

Edzix,

You stated in July that it would only be a couple months before this software was available... When should we expect it?

ilero

I have been told that since my hotspot users are getting Private IPs from the DHCP server, they all have the same subnet mask. As a result, there is no way to keep users isolated from one another. Of course, if I use an AP that has the "disable client-to-client communications" then it will...

ilero

I currently use the Hotspot feature on the MikroTik to authenticate my fixed wireless customers. The DHCP server hands out private IPs. I need to limit users from accessing one another's computers. I have been using the "Disable Client-to-Client Communications" in my SmartBridges equipment...

Search found 49 matches

Assign VLAN to wireless clients utilizing Radius

Re: RB133 or RB150

Re: E-mail TO address issue

E-mail TO address issue

Re: dhcp server RC6

Re: Dude as a RouterOS Package

Issues with Username/Password for Dude & Userman - 3.0rc2

Re: Dude as a RouterOS Package

Dude as a RouterOS Package

Add domain to Hotspot Username

Problems with SNMP rx/tx readings on Network Map - 1.0rc1

Radius setup in 2.9.11

Externally accessing hotspot login page (2.9.11)

Ability to open up Winbox for MT with Hotspot

Using the Dude for multiple locations

Historical Graphing

HELP - Problems with Radius when running Hotspot with ECMP

Radius Accounting On/Off Notification

DHCP Problems when using Tranzeo Radios

Changing Band for CM9 in rc8 & rc10

Problem with MRTG - SNMP Polling - 2.8.26

HELP with setting up MT as AP and Station

Client Isolation

Hotspot Keepalive Timeout

500+ Concurrent Hotspot Users

VoIP

Netwatch Feature Request

Disabling Client-to-Client Communication