Impressive work I made use of the older deprecated version but this is awesome hands down! Now Testing!

You must create an script to do it something like this (I'm not script ninja btw) .First must create the local pppoe accounts and keep it disble state then create a ping keepalive rule in netwatch "tools>netwatch" to the radius server ip, when the radius stops to work trigger a local rule ...

Hi, I need some consulting services to deploy a full Mikrotik network with some of these features
PtMP Full Mikrotik Network
AP to CPE with MPLS IPv4 /IPV6
Core NETWORK FULL BGP 2 Providers

Try this out, not in englisch but look to the printscreens a made
http://www.wirelessinfo.be/index.php/mi ... /omnitikpp

Thanks some previous test give me high latency for nv2 vs nstream in ptmp I expect make more test soon.

Anyone can help with the settings for a point to multipoint enviroment using the following Mikrotik equipment

RB912UAG-5HPnD
RBSXT5nSr2

I plan to use 70 RBSXT5nSr2 at 10 mhz channel width using sectors 19 dBi.

This is what I use, just put an public IP in your interface facing the public IP gateway and enable proxy-arp in this interface then asing the public IP in ppp secret > remote address you must set a default profile with a local address. ISP 1.1.1.1/30 >>>> UR-Router WAN-1.1.1.2/30>>> Lan Gateway 8.0...

Hi, I had installed the version 4.0-RC1 With the hole system in this version working as pppoe server with 500 users works flawless at the first time but yesterday a electrical failure makes my MT down for a few minutes after the ups drains, suddenly the Radius stop to work and no authenticate client...

I have the same setup , but I made a research of the signal interference per channel to pick the best channel because my own base stations was made interference even at 4 K.M as far. The pics are for one base statio of a cluster of 3 with 3 120° Pac Wireless Sectors RB433AH +Ubiquiti XR5 3 Radios on...

max-client-connections: 600
max-server-connections: 600

These values are to low for my opinion play with these values I have max-server-connections: 5000. for example.

Well I have the same issues over WDS Bridges and I been researching a lot and may be the WDS are the problem I gonna try EoIP soon to see what happen.

1- What kind of service you sell Wifi? Cable? Adsl? other? (each medium has it's limits) 2- Do you have the amount of bandwidth necessary for sell that kind of plans? at least 3Gbps for 1200 clients using fine tuned QoS and many other techniques. 3- Your Mikrotik Core Router must be a very powerfull...

No multicore issues in 3.17 and 3.18 works flawless on a IBM machine with a dual core Xeon 2 gigs of ram more than 300 4% CPU Use pppoe conections 3.20 MT queues seems dot not correctly no pppoe problems.

I have tried many modules and XR2, XR5 are the best performance modules in almost any condition in realtime.

May be you can look the specs of XR5 and that respond your question.

Well, I have an external cache but I don't have check serialize connections option and I notice that max client connection and max server connections affect the performace a lot. From Mikrotik Docs serialize-connections (yes | no; default: no) - Do not make multiple connections to server for multipl...

Use an external cache it's better solution if you have a lot clients.

Hi, I was working on your guide I made all steps except one, I've downloaded de zph patch to squid3stable8 It comes with two patch one for squid source and one to the linux kernel but I see the linux kernel version do not match with my linux kernel version even browsing in the reposotories I dind't ...

I have the following problems in my network, clients for diferents nodes are visible on Vista Network Places and others clients suddenly disconnects from the hotspot when others try to login (clients connected from the main AP don't suffer this problem only the clients of the bridged nodes), I made ...