Community discussions

Search found 117 matches

by uebi
Tue Aug 27, 2019 9:02 am
Forum: General
Topic: Weird IPv6 stuff
Replies: 4
Views: 517

Re: Weird IPv6 stuff

When the wAP connects to LTE, it receives the prefix via RA and assigns it to the interface selected in the APN config, but as 0. Besides that I have seen the same behavior with PD, but as there have been additional issues a case is open regarding the DHCPv6 problems. Anyway, with the exact same con...
by uebi
Mon Aug 26, 2019 8:37 pm
Forum: General
Topic: Weird IPv6 stuff
Replies: 4
Views: 517

Re: Weird IPv6 stuff

Well, not a network address like in IPv4, but a Router Anycast address, according to RFC 4291. I'm just wondering about this implementation, as MikroTik assigns this address itself (maybe 1 might be better), but a MikroTik "Client" says it is unreachable, although it is not. Technically it is on the...
by uebi
Mon Aug 26, 2019 3:53 pm
Forum: General
Topic: Weird IPv6 stuff
Replies: 4
Views: 517

Weird IPv6 stuff

Hi all! Just configured a wAP LTE and a cAP AC behind it. The wAP gets an IPv6 prefix from the ISP. Two things that aren't too clear to me: If I add multiple addresses from the same prefix to the same interface, why is the route shown as reachable n times the number of addresses the interface has? I...
by uebi
Sat Oct 18, 2014 12:50 pm
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

Just for the record: It was a mistake and my status as consultant has been reenabled. MikroTik finally confirmed that the MTCNA can expire but as long as the advanced certification is vaild you will keep the status. Everything else wouldn't make sense anyway as I originally critizied. Thanks and hav...
by uebi
Mon Oct 13, 2014 10:32 am
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

Sorry for necroposting (again), but I just wanted to update my status... I just realized that I'm no longer listed as a MikroTik certified consultant. I was wondering why and contacted the MikroTik sales team. A very friendly guy told me the reason is because my MTCNA has expired. Well... I told him...
by uebi
Thu Aug 08, 2013 10:58 am
Forum: RouterBOARD hardware
Topic: New Hardware! - EU MUM 2013
Replies: 54
Views: 20183

Re: New Hardware! - EU MUM 2013

Are there any news about CCR1036-8G-2S+ (should be available in June according to the croatian MUM presentation) or the CRS125-24G1S-RM (should be available in May according to the croatian MUM presentation)? Price? Availability? New dates? Anything? KR, uebi I have to quote myself... Any news? htt...
by uebi
Wed Aug 07, 2013 5:14 pm
Forum: RouterBOARD hardware
Topic: New Hardware! - EU MUM 2013
Replies: 54
Views: 20183

Re: New Hardware! - EU MUM 2013

Are there any news about CCR1036-8G-2S+ (should be available in June according to the croatian MUM presentation) or the CRS125-24G1S-RM (should be available in May according to the croatian MUM presentation)? Price? Availability? New dates? Anything?


KR,
uebi

I have to quote myself... Any news?
by uebi
Mon Jul 15, 2013 6:45 pm
Forum: RouterBOARD hardware
Topic: RB-2011UAS-RM New hardware version, does not work with 5.25
Replies: 23
Views: 7781

Re: RB-2011UAS-RM New hardware version, does not work with 5

I discovered a strange problem with a new installation last week... A genuine MikroTik 1 Gig BiDi SFP does NOT work in a RB2011 with the new HW revision! It works with an old RB2011 though... Has anybody a similar issue?? If I use a different SFP (for example Copper Gigabit SFP) it works, but the Mi...
by uebi
Fri Jun 28, 2013 2:10 pm
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

Online tests are often taken by somebody else. For Cisco and other certifications the person's ID is checked at the testing center. Like it or not, Mikrotik's current certification system is simply unattractive to many experienced network engineers. We don't have testing centres. Therefore we can't...
by uebi
Fri Jun 28, 2013 9:57 am
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

Online tests are often taken by somebody else. If you want a high security testing environment than you'll have to move to Person VUE, Prometric or whatever. All the vendors who offer online certification (for example Extreme Networks for the ENA is one of them afaik) have to face this "risk". Anyw...
by uebi
Thu Jun 27, 2013 5:59 pm
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

those guys WILL fail if they just retake the exam 3 years later without using RouterOS on a regular basis - definitely! If you sit them in a training AGAIN they might pass. The bad thing is that the current policy wants people who really now their way around in RouterOS sit next to them and idle fo...
by uebi
Wed Jun 26, 2013 7:00 pm
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

The CCIE is far and away beyond anything that Mikrotik offers - not even in the same league............. 110% true... From the comments in this thread and others my conclusion is that Mikrotik has a very basic curriculum outlined and an even more basic testing regime - thus the process is highly de...
by uebi
Fri Jun 21, 2013 2:08 pm
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

It still costs a lot of money to retake that exam. In the end, is the problem, the price, or the 3 days ? Well, I'm not sure to about the CCIE written, but a single CCNA or CCNP exam (640-XXX or 642-XXX) is about € 150,- at Pearson VUE. That's not so much money. The 3 days might be ok if it's a web...
by uebi
Fri Jun 21, 2013 1:35 pm
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

It is wrong to compare this with Cisco CCIE. In their case, you still need to re-take the exam after 24 months, but their course costs much more, so comparison is not fair. Cisco also changes a lot in 2 years, but a CCIE just goes to a Pearson VUE testcenter in his region and takes the exam. That's...
by uebi
Fri Jun 21, 2013 1:18 pm
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

Hi TowerRouter! Luckily there's somebody here who understands me a bit :-) To me the MikroTik certification procedure seems to be in some sort of a beta state (still). I like MikroTik and use it for a quite long time now, but the certification stuff is just weird. I also sometimes received different...
by uebi
Wed Jun 12, 2013 11:28 am
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

Instead of the above, you could just clarify that they can write MTCNA in their signature if they want, even after more than 3 years, if they have other active certificates. What's more, "Course prerequisities - MTCNA certificate" works with expired MTCNA if you have MTCRE or similar. Ok, then I wi...
by uebi
Wed Jun 12, 2013 11:10 am
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

what do you mean "keep them both" ? if you have MTCRE, it is automatically assumed you have MTCNA. You don't need to show it to anybody, valid MTCRE includes MTCNA within it self, so to say. Even if you passed MTCNA 8 years ago, if your MTCRE is active, you automatically have MTCNA Yeah, that's tru...
by uebi
Wed Jun 12, 2013 11:02 am
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

uebi during those three years, we have introduced plenty of new features, changed some commands, removed things and completely reorganized how queues work. it's not "just sitting". it is keeping yourself up to date. Yeah, that's for sure. That's technology and that's how it is. It's the same situat...
by uebi
Wed Jun 12, 2013 10:37 am
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

Just a short update for everybody who is interested: After I didn't get a response here I opened a ticket, because I have to know a correct and up to date answer as we are hosting at least two trainings this year and I will be definitively asked this question (as everytime we are hosting a training)...
by uebi
Fri Jun 07, 2013 3:41 pm
Forum: RouterBOARD hardware
Topic: New Hardware! - EU MUM 2013
Replies: 54
Views: 20183

Re: New Hardware! - EU MUM 2013

Are there any news about CCR1036-8G-2S+ (should be available in June according to the croatian MUM presentation) or the CRS125-24G1S-RM (should be available in May according to the croatian MUM presentation)? Price? Availability? New dates? Anything?


KR,
uebi
by uebi
Wed May 29, 2013 11:32 am
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

So an expired MTCNA allows somebody to attend an engineer level course?? I took my MTCNA and MTCRE last year, if I attend the MTCINE training this year I can reattend the MTCINE training in 3 years with an expired MTCNA and MTCRE (which is about to expire in 2 years)??? Only downside would be that ...
by uebi
Tue Nov 27, 2012 9:54 am
Forum: RouterBOARD hardware
Topic: Rb2011 and UPS
Replies: 3
Views: 2148

Re: Rb2011 and UPS

I'm currently to get an APC USB UPS working together with an RB2011. The same UPS works like a charme with the same cable connected to a RB411. I think it might not be the cable, but the RB2011 that is causing the problem. Only just a guess! :-)


KR,
uebi
by uebi
Tue Nov 27, 2012 9:53 am
Forum: RouterBOARD hardware
Topic: RB2011UAS and APC USB UPS
Replies: 7
Views: 2434

Re: RB2011UAS and APC USB UPS

Thanks for the update, Dobby. Did a search but must have missed the thread with the rollover cable. Anyway, I'm pretty sure the problem doesn't exist because of the cable... Even if RB2011 is SOHO, a available USB port and an already existing ups package should work I believe. They don't have to inv...
by uebi
Mon Nov 26, 2012 6:31 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS and APC USB UPS
Replies: 7
Views: 2434

RB2011UAS and APC USB UPS

Hi everyone! I just tried to connect an APC USB UPS to a RB2011UAS-RM, but the RouterBOARD can't see it. If I plug the UPS into a RB411U everything works like a charme, but no chance on RB2011UAS. I tried different Micro USB to USB adaptors as well, but no luck. Bug, Feature, or am I doing something...
by uebi
Thu Nov 01, 2012 7:34 pm
Forum: General
Topic: IPv6 PD over PPP - static prefix - HOW???
Replies: 4
Views: 1626

Re: IPv6 PD over PPP - static prefix - HOW???

I guess that would work but as mentioned above, it's a tiny network and therefore there is no Radius server. I also don't want to setup a Radius server for a couple of customers. Would be great though to specify it on the RouterBOARD itself.


KR,
uebi
by uebi
Wed Oct 31, 2012 3:09 pm
Forum: General
Topic: IPv6 PD over PPP - static prefix - HOW???
Replies: 4
Views: 1626

Re: IPv6 PD over PPP - static prefix - HOW???

Still nuttin?


Any official MikroTik staff reply? Could this be an upcoming feature?? This WILL be needed for sure in the future!


KR,
uebi
by uebi
Tue Oct 16, 2012 6:07 pm
Forum: General
Topic: IPv6 PD over PPP - static prefix - HOW???
Replies: 4
Views: 1626

Re: IPv6 PD over PPP - static prefix - HOW???

Nobody? :-(
by uebi
Thu Oct 11, 2012 11:44 am
Forum: General
Topic: IPv6 PD over PPP - static prefix - HOW???
Replies: 4
Views: 1626

IPv6 PD over PPP - static prefix - HOW???

Hi everyone! As already asked some time ago, I still can't get this to work :-( My goal: I want to authenticate a couple of clients with PPPoE. Their routers (non MikroTik!) receive the public IPv4 address just fine, the IPv4 clients behind those routers are using src-nat and everything is working f...
by uebi
Fri Sep 28, 2012 12:40 pm
Forum: RouterBOARD hardware
Topic: problem of gigabit port between cisco and mikrotik
Replies: 41
Views: 23938

Re: problem of gigabit port between cisco and mikrotik

Depends...

WS-C3550-24-SMI is 24x 10/100 plus 2x GBIC (1000)
...
WS-C3550-12G is 10x GBIC (1000) plus 2x 10/100/1000 Copper


KR,
uebi
by uebi
Fri Sep 28, 2012 10:37 am
Forum: RouterBOARD hardware
Topic: problem of gigabit port between cisco and mikrotik
Replies: 41
Views: 23938

Re: problem of gigabit port between cisco and mikrotik

I had the same constellation some time ago. Worked without a problem...

Why don't you use auto on both sides?


KR,
uebi
by uebi
Thu Sep 27, 2012 6:23 pm
Forum: General
Topic: MUM in New Orleans, September 26-28, 2012
Replies: 9
Views: 1148

Re: MUM in New Orleans, September 26-28, 2012

Now video but unwatchable...


KR,
uebi
by uebi
Thu Sep 27, 2012 6:20 pm
Forum: General
Topic: MUM in New Orleans, September 26-28, 2012
Replies: 9
Views: 1148

Re: MUM in New Orleans, September 26-28, 2012

+1

and sorry positng on the old Dubai MUM topic


KR,
uebi
by uebi
Thu Sep 27, 2012 6:18 pm
Forum: General
Topic: USA MUM Live NOW!
Replies: 6
Views: 1823

Re: Dubai MUM Live NOW!

Hi there! Sorry for reviving an old post, but I was unable to watch the Dubai MUM Live and now, trying to watch the US MUM Live I got the same problem. First it was extremely choppy and now the stream doesn't start at all. Is this just my problem or anyone else experiencing the same issues? KR, uebi
by uebi
Wed Sep 26, 2012 4:15 pm
Forum: RouterBOARD hardware
Topic: Cloud Router SFP+
Replies: 4
Views: 2113

Re: Cloud Router SFP+

cloudcorerouter.com says 12x Gigabit Ports and 4x SFP

4x SFP not 4x SFP+

I don't believe that they've forgotten the +
I'm pretty sure it's "just" SFP.



KR
by uebi
Fri Aug 31, 2012 5:45 pm
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 27090

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

According to http://www.mikrotik.com/download/share/du12.pdf the CCR1036 will arrive at the end of September (2012 hopefully ;-) )


F*#$ing s*xy great news!!!! :-)



KR,
uebi
by uebi
Fri Aug 31, 2012 5:43 pm
Forum: RouterBOARD hardware
Topic: MUM Dubai new products
Replies: 16
Views: 3347

Re: MUM Dubai new products

http://www.mikrotik.com/download/share/du12.pdf

RB2011UAS-RM (with RJ45 serial port) and CCR1036 - What could I wish more? :-)
THANKS MikroTik, those two new products made my day!!


KR,
uebi
by uebi
Wed Aug 22, 2012 6:26 pm
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 100
Views: 57508

Re: SFP module

Hi again!

Are there any news regarding support for 100mbit SFPs??

Many of our partners and myself of course are still hoping to get that fixed!! :-(


KR,
uebi
by uebi
Thu Aug 16, 2012 10:28 pm
Forum: General
Topic: Newsletter 41: NEW PRODUCTS!
Replies: 64
Views: 25395

Re: Newsletter 41 NEW PRODUCTS!

I'll order the RB44Ge and RB2011L-RM tomorrow :-)

Are there any plans/a date for RB2011LS-RM (rackmount with SFP)??


Thanks!
by uebi
Tue Jul 31, 2012 10:24 am
Forum: General
Topic: DHCPv6 for home installations?
Replies: 37
Views: 13220

Re: DHCPv6 for home installations?

Why do you need one of the IP6 assigned to the PPoE LAN side? As long as you don't need router access on that interface/IP combination it has no use. All IPv6 enabled interfaces have a LL address assigned automatically for data transport purposes, and only forwarding has to be done for "inside" add...
by uebi
Mon Jul 30, 2012 7:33 pm
Forum: Forwarding Protocols
Topic: BGP Route Server
Replies: 6
Views: 3341

Re: BGP Route Server

RouterOS can't be configured as route server. It does not support such feature.
No support yet or no support ever? :-)

Are there any plans?



Thanks,
uebi
by uebi
Mon Jul 30, 2012 2:18 pm
Forum: General
Topic: DHCPv6 for home installations?
Replies: 37
Views: 13220

Re: DHCPv6 for home installations?

Hi everyone! Thanks for the great post! I'm currently testing the PPPoE Server with RouterOS 5.19 and giving out /64 IPv6 prefixes to PPPoE Clients. This works fine with RouterOS Clients (in my case I'm manually configuring one IPv6 address out of the prefix on the PPPoE Clients LAN side). If I have...
by uebi
Thu Jul 12, 2012 6:28 pm
Forum: General
Topic: Correct MTU for QinQ through EoIP
Replies: 5
Views: 2638

Re: Correct MTU for QinQ through EoIP

A QinQ packet have 2 VLAN tags, so the L2MTU needs to be at least 1508. Well, that's what I'm not sure about (if we are talking about the LAYER 2 FRAME): 802.1q trunking - Header: 4 bytes = 1500 + 4 + 18 = 1522 L2 QinQ - Header: 4 + 4 bytes = 1500 + 4 + 4 + 18 = 1526 L2 So L2MTU (which sounds to me...
by uebi
Thu Jul 12, 2012 3:34 pm
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 100
Views: 57508

Re: SFP module

does not support Ad-Net SFP155-WDM1310/10

http://www.ad-net.com.tw/index.php?id=294

Is it possible to add support for this SFP?

Yeah, just like any other 100mbit SFP :-(
I'm desperately hoping for 100mbit support, too.


kr,
uebi
by uebi
Thu Jul 12, 2012 2:45 pm
Forum: General
Topic: Correct MTU for QinQ through EoIP
Replies: 5
Views: 2638

Re: Correct MTU for QinQ through EoIP

I advice you to use BCP over L2TP with MLPPP support over single link instead of EoIP, then you don't have to mind about the packet size through the tunnel. Even if I don't need MLPPP? I'm just looking for PtP and QinQ, nothing more, nothing less. Regarding the MTU size, it's the L2MTU you should l...
by uebi
Wed Jul 11, 2012 11:57 am
Forum: General
Topic: Correct MTU for QinQ through EoIP
Replies: 5
Views: 2638

Correct MTU for QinQ through EoIP

Hi everyone! I hope that anyone here can guide me in the right direction regarding the following scenario: RouterBOARD 1: ether1 has a tagged VLAN 10 "subinterface" with a /30 IP address eoip-tunnel1 is bridged with ether2 RouterBOARD 2: ether1 has also a tagged VLAN 10 "subinterface" with the other...
by uebi
Tue Jul 10, 2012 10:34 am
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 100
Views: 57508

Re: SFP module

FYI the RB2011 DOES NOT support reading of A0h/A2h stats as per SFF-8472.

According to Mikrotik this feature may be added to future products.

Thanks for the update!



KR,
uebi
by uebi
Fri Jul 06, 2012 12:24 pm
Forum: RouterBOARD hardware
Topic: RB2011 switch port groups
Replies: 38
Views: 48948

Re: RB2011 switch port groups

In winbox menu Switch you should see

Atheros8327 for ether1-ether5+sfp1 and
Atheros8227 for ether6-ether10


KR,
uebi
by uebi
Thu Jul 05, 2012 12:22 am
Forum: RouterBOARD hardware
Topic: RB2011 switch port groups
Replies: 38
Views: 48948

Re: RB2011 switch port groups

Iirc there are 2 switch chips. One for the gig ports and the SFP slot (RB2011LS) and one for the fast ethernet ports.

Hth,
uebi
by uebi
Mon Jul 02, 2012 10:24 am
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 100
Views: 57508

Re: SFP module

Like a previous post, I would like to see some other supported SFP's such as 100FX and 1000SX
Bad luck for 100FX (or any other 100Base) at the moment...
See http://forum.mikrotik.com/viewtopic.php ... 59#p320179


KR,
uebi
by uebi
Sat Jun 23, 2012 9:00 pm
Forum: RouterBOARD hardware
Topic: RB2011LS-IN + cisco module
Replies: 25
Views: 13480

Re: RB2011LS-IN + cisco module

Well, in 2012 I'm buying mostly Gig SFPs, even if I don't need the bandwidth. The price (money for value) and the availability is just better! The only thing I'd love to have from the RB2011LS SFP Port is "downward compatibility", especially if it can be solved in software! I don't wanna throw away ...
by uebi
Fri Jun 22, 2012 5:45 pm
Forum: RouterBOARD hardware
Topic: RB2011LS-IN + cisco module
Replies: 25
Views: 13480

Re: RB2011LS-IN + cisco module

Hi again! Thanks for the reply, Dobby. You are right on some points, but not on everything :-) I don't need just 100BaseFX, as a fact I don't even use that! I'm interessted in 100BaseBX (100mbit BUT only ONE fiber!) as we have been deploying 100BaseBX switches some time ago (This one: http://www.edg...
by uebi
Thu Jun 21, 2012 4:38 pm
Forum: RouterBOARD hardware
Topic: RB2011LS-IN + cisco module
Replies: 25
Views: 13480

Re: RB2011LS-IN + cisco module

Just 2 more cent for everybody who's interessted on the subject: I just talked to our (pretty large) transceiver supplier and he told me that he knows about switches etc where the SFP ports were initially Gig only as well, but with later software versions the Gig only ports became dual rate ports as...
by uebi
Tue Jun 19, 2012 11:33 am
Forum: The User Manager
Topic: User Manager for PPPoE with IPv6
Replies: 0
Views: 811

User Manager for PPPoE with IPv6

Hi all! For a new project I would need to run the User Manager for PPPoE customers. Works nice as always, but the clients should receive a /64 IPv6 prefix along with the IPv4 address. This is no problem if I configure it without the User Manager (PPP -> Secrets -> Remote IPv6 prefix). Is there any w...
by uebi
Mon Jun 18, 2012 1:12 pm
Forum: RouterBOARD hardware
Topic: RB2011LS-IN + cisco module
Replies: 25
Views: 13480

Re: RB2011LS-IN + cisco module

Thanks Normis, that's an answer I can finally rely on (and others hopefully as well)! Regarding my ticket from 2011 (Ticket #201104286600015) I got no guranteed answer if 100mbit SFPs are supported or not, therefore my question was still remaining open until today. I read this line of course, but I ...
by uebi
Sun Jun 17, 2012 5:33 pm
Forum: RouterBOARD hardware
Topic: RB2011LS-IN + cisco module
Replies: 25
Views: 13480

Re: RB2011LS-IN + cisco module

you've got the answer before you even posted, look at normis post. I don't wanna be rude, but you don't get the point. In chronological order: 1. Many people (including me) are asking what types of SFPs are supported even before the product is released. 2. Mikrotik answers all SFF conform transceiv...
by uebi
Fri Jun 15, 2012 11:53 pm
Forum: RouterBOARD hardware
Topic: RB2011LS-IN + cisco module
Replies: 25
Views: 13480

Re: RB2011LS-IN + cisco module

100M sfp will work only in devices that support 100M. Also 10Gb modules. Yeah, I'm aware of that, but there is also something called Dual Rate SFP Slot that supports both, 100 and 1000 mbit SFPs as well as 10 Gig SFP+ Slots that support 1000mbit SFPs. I just wanna know if the RB2011 has one of thos...
by uebi
Fri Jun 15, 2012 11:03 am
Forum: RouterBOARD hardware
Topic: RB2011LS-IN + cisco module
Replies: 25
Views: 13480

Re: RB2011LS-IN + cisco module

Have you tried to enable/disable auto-negotiation. and change "sfp-rate-select" value?
Thanks for the reply!

Yeah, tried that aswell, but makes no difference... :-(


KR,
uebi
by uebi
Thu Jun 14, 2012 4:58 pm
Forum: RouterBOARD hardware
Topic: RB2011LS-IN + cisco module
Replies: 25
Views: 13480

Re: RB2011LS-IN + cisco module

RB2011 supports any 1.25G SFP transceivers that is within the SFF Committee specifications for SFP Transceivers. So this finally means that the RB2011LS-IN does NOT have a dual rate SFP Slot as discussed/hoped/mentioned/... earlier??? I got my first RB2011LS-INs and they work great with Gigabit SFP...
by uebi
Wed Jun 13, 2012 4:29 pm
Forum: General
Topic: Tiny PPPoE Server Question
Replies: 2
Views: 598

Re: Tiny PPPoE Server Question

Hi Devil!

Ok, so my assumption was pretty correct :-)

Thanks for the clarification!!!!



KR,
uebi
by uebi
Wed Jun 13, 2012 11:56 am
Forum: General
Topic: Tiny PPPoE Server Question
Replies: 2
Views: 598

Tiny PPPoE Server Question

Hi everyone! For a long time now I'm wondering about a tiny PPPoE Server question but I can't find an answer... What exactly is the PPP -> Interface -> PPPoE Server action for compared to PPP -> PPPoE Servers??? The first action creates an "Interface" called pppoe-in1 and the section action creates ...
by uebi
Fri May 25, 2012 12:01 pm
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

So an expired MTCNA allows somebody to attend an engineer level course?? I took my MTCNA and MTCRE last year, if I attend the MTCINE training this year I can reattend the MTCINE training in 3 years with an expired MTCNA and MTCRE (which is about to expire in 2 years)??? Only downside would be that ...
by uebi
Fri May 25, 2012 11:46 am
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

Hi Edmunds! Thanks for the quick reply! If I'm holding the MTCINE certificate, which I'd like to take this year, I hope that in 3 years I don't have to take 3 classes again (MTCNA, MTCRE and MTCINE)?? It is not required to renew your MTCNA certificate to attend any of engineer level courses. So an e...
by uebi
Fri May 25, 2012 11:08 am
Forum: General
Topic: Mikrotik Certification test
Replies: 89
Views: 35035

Re: Mikrotik Certification test

But if you are not a traine r, the certificate validity is not a big concern for you. What do you mean by this sentence?? I always thought that it should be a big concern because of the prerequists to take advanced trainings?!? The more important question to me is something I already asked your Sup...
by uebi
Thu Mar 15, 2012 4:03 pm
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 100
Views: 57508

Re: SFP module

Which SFP module features would be most important for you? Distance, power, mode, wavelength, channels, voltage etc. For example: http://www.finisar.com/sites/default/files/pdf/Transceiver%20Guide.pdf I mean exactly SFP, not any other standard. For us it's - 1000BaseSX (Multimode, 550m) for the dat...
by uebi
Fri Feb 25, 2011 4:38 pm
Forum: General
Topic: Almost historic :-)
Replies: 4
Views: 585

Re: Almost historic :-)

Not much. A bit src-nat and some simple queues with graphs.


KR
by uebi
Fri Feb 25, 2011 3:43 pm
Forum: General
Topic: Almost historic :-)
Replies: 4
Views: 585

Re: Almost historic :-)

No, I'm not that old ;-)

It's hours... The MT had some reboots in the past, but it has been running since 2004...
Winbox has been pretty colorful those days :-)

BTW: It was a TYAN GS-10 1 HE rackmount server barebone with a 2.4 GHz Celeron, running for almost 7 years 24/7!



KR,
uebi
by uebi
Fri Feb 25, 2011 1:12 am
Forum: General
Topic: Almost historic :-)
Replies: 4
Views: 585

Almost historic :-)

Hi everyone! Tomorrow I'm going to replace one of my very first MikroTik installations by a RB1100. Has been running for a couple of years now and I just made a screenshot for all the people out there who have never seen what RouterOS 2.8 has been looking like :-) http://twitpic.com/43diad/full Oldi...
by uebi
Wed Feb 23, 2011 4:26 pm
Forum: RouterBOARD hardware
Topic: SFP and DSL support
Replies: 32
Views: 12213

Re: SFP and DSL support

Believe it or not (or verify it *G*), I just booked :-)

It's time anyway, my last MUM was Krakow...


uebi
by uebi
Wed Feb 23, 2011 3:48 pm
Forum: RouterBOARD hardware
Topic: SFP and DSL support
Replies: 32
Views: 12213

Re: SFP and DSL support

didn't you receive the latest MUM announcement mail?
:wink:

"Announcing SOHO AP, SFP fiber device etc.- more than ten new products, never seen before"

Sure :-)

Just wondering what it will be! Hope it will match my dreams/wishes in some way... ;-)


KR
by uebi
Wed Feb 23, 2011 3:41 pm
Forum: RouterBOARD hardware
Topic: SFP and DSL support
Replies: 32
Views: 12213

Re: SFP and DSL support

Still waiting for Mikrotik's/Normis' plans... I'm completely hot for a RB750 with SFP and a RB1100 with SFP. My first priority has the RB750 with SFP, because at the moment we have to use CPEs by an other vendor or MikroTiks with some stupid converter in front of them. Both options suck. Would be so...
by uebi
Mon Jun 15, 2009 3:20 pm
Forum: General
Topic: Unlimited queues not counting anymore?
Replies: 5
Views: 640

Re: Unlimited queues not counting anymore?

Oh, I see, thanks for the info!


Greets,
uebi
by uebi
Mon Jun 15, 2009 2:54 pm
Forum: General
Topic: Unlimited queues not counting anymore?
Replies: 5
Views: 640

Re: Unlimited queues not counting anymore?

PS: Just checked it again and I got a 2.9.25 x86 installation where default-small on unlimited queues actually IS counting. Why did it work in the past, will it work in the future and why was there this change??


Greets,
uebi
by uebi
Mon Jun 15, 2009 11:04 am
Forum: General
Topic: Unlimited queues not counting anymore?
Replies: 5
Views: 640

Re: Unlimited queues not counting anymore?

Sometimes life's so easy...


THX!


Greets,
uebi
by uebi
Mon Jun 15, 2009 10:50 am
Forum: General
Topic: Unlimited queues not counting anymore?
Replies: 5
Views: 640

Unlimited queues not counting anymore?

Hi there! I've been using queues with NO bandwidth limitation for a long time now to create graphs and count rx/tx and total rx/total tx. On Friday I would have needed this feature on a RB450 with 3.18 but it didn't count anything! After upgrading the FW an ROS to the most current version I still ha...
by uebi
Fri Mar 28, 2008 9:53 am
Forum: General
Topic: MikroTik MUM 2008 Krakow
Replies: 26
Views: 5861

Re: MikroTik MUM 2008 Krakow

Some material to "Network Simulations with RouterOS by Patrik Schaub" would be nice. I sadly missed that one.

Greets,
uebi
added to the wiki now
THX! :-)
by uebi
Wed Mar 19, 2008 10:45 am
Forum: General
Topic: MikroTik MUM 2008 Krakow
Replies: 26
Views: 5861

Re: MikroTik MUM 2008 Krakow

Some material to "Network Simulations with RouterOS by Patrik Schaub" would be nice. I sadly missed that one.

Greets,
uebi
by uebi
Wed Mar 12, 2008 2:49 pm
Forum: Scripting
Topic: bandwidth control with scripting
Replies: 5
Views: 1601

Re: bandwidth control with scripting

good works, uebi
Thanks!

If the people here like it, I don't regret that I spent my time on writing a howto instead of playing online poker ;-)


Greets,
uebi
by uebi
Wed Mar 12, 2008 12:50 am
Forum: Scripting
Topic: bandwidth control with scripting
Replies: 5
Views: 1601

Re: bandwidth control with scripting

About 10 minutes ago I finished a short howto for a similar purpose: Volume limitation for every month.

Maybe it can help you....
http://www.uebi.net/howtos/volumelimit.htm


Greets,
uebi
by uebi
Tue Mar 11, 2008 3:33 pm
Forum: General
Topic: v4.0 Feature Request(s)
Replies: 139
Views: 38670

Re: v4.0 Feature Request(s)

A small but (at least to me) useful feature would be a tiny upgrade to Tools -> Graphing. The graphing for queues works really great, but..... in Winbox you can also see the traffic transmitted for every queue. Would it be possible to include this value on the queue graph website where "Max-limit:" ...
by uebi
Tue Mar 04, 2008 11:35 pm
Forum: Scripting
Topic: Changes from 2.9.50 to 3.4
Replies: 1
Views: 876

Re: Changes from 2.9.50 to 3.4

[admin@MikroTik] queue simple> set [find target-addresses="192.168.6.4"] max-limit=128000/128000
I just found out that v3 wants a /32 behind the IP address.
So this question is answered, but I still dare for a "scripting changelog" ;)


Thanks,
uebi
by uebi
Tue Mar 04, 2008 11:15 pm
Forum: Scripting
Topic: Changes from 2.9.50 to 3.4
Replies: 1
Views: 876

Changes from 2.9.50 to 3.4

Hi there! Is there ANY documentation what has been changed for scripting since 2.9?? I'm f#cking around with a script for 2 hours now that works perfectly fine in 2.9 but brings up various errors in 3.4. The "manual" for v3 doesn't show anything for scripting and I suppose that it's not pretty helpf...
by uebi
Mon Feb 25, 2008 8:41 pm
Forum: General
Topic: Another not that important bug in 3.3
Replies: 1
Views: 1127

Re: Another not that important bug in 3.3

Hmmm, something else I just realized: I had some policy routing configured in 3.0rc13 that know no longer works :-( The rules where that port 80 and 53 go out one upstream and everything else through the second upstream. There is also a more specific route that port 80 for a smaller network always f...
by uebi
Mon Feb 25, 2008 8:16 pm
Forum: General
Topic: running config and startup config in v4.0
Replies: 5
Views: 4069

Re: running config and startup config in v4.0

Well, I have to admit that I was thinking about this feature pretty often in the past. If I do something "risky" on a Cisco and it goes wrong, I call a person at the other end and ask to pull the plug. Apart from the reboot everything is fine again. Such a "feature" would be nice on Mikrotik, too, s...
by uebi
Mon Feb 25, 2008 8:09 pm
Forum: General
Topic: Another not that important bug in 3.3
Replies: 1
Views: 1127

Another not that important bug in 3.3

Hi there! I just upgraded my home RB150 from rc13 to 3.3 by drag and dropping the routeros-mipsle-3.3.npk into "Files". Rebooted, everything fine, but since the upgrade my Winbox title bar says: "admin@192.168.7.254 - Winbox v3.3 on RB MR ( powerpc )" Hmmm, did the software upgrade change my platfor...
by uebi
Mon Feb 11, 2008 2:37 pm
Forum: General
Topic: MikroTik MUM 2008 Krakow
Replies: 26
Views: 5861

Re: MikroTik MUM 2008 Krakow

BTW: What happened to the MPLS presentation?

Greets,
uebi
by uebi
Mon Jan 14, 2008 11:43 am
Forum: General
Topic: Feature Suggestion: SIP proxy / siproxd
Replies: 9
Views: 6922

Re: Feature Suggestion: SIP proxy / siproxd

I'm sure that I'm not alone with this issue?!
No, your're not, we are 2 already *GG*


Greets,
uebi
by uebi
Mon Jan 14, 2008 11:15 am
Forum: General
Topic: Ipv6
Replies: 64
Views: 18221

Re: Ipv6

Well, luckily I don't have to use IPv6 yet, but please always remember http://youtube.com/watch?v=_y36fG2Oba0

:D


Greets,
uebi
by uebi
Thu Jan 10, 2008 7:41 pm
Forum: Beginner Basics
Topic: Can i use a scsi hard drive for web proxy ???
Replies: 14
Views: 4008

Re: Can i use a scsi hard drive for web proxy ???

The point is that more than 1 gig of RAM can only be USED in 3.x So if you NEED it, you should upgrade. If 1 gig is enough and you don't need any "bleeding edge" features, stay with 2.9 The most basic update steps are: Just type /system licence print so see if you can upgrade to 3.x If yes, download...
by uebi
Thu Jan 10, 2008 6:05 pm
Forum: General
Topic: Thanks for rc14.
Replies: 3
Views: 1784

Re: Thanks for rc14.

A big THANKS from me, too!
I just updated my 532/564 and now I'll resume to seed your torrent ;-)


Greets,
uebi
by uebi
Thu Jan 10, 2008 11:09 am
Forum: Beginner Basics
Topic: Can i use a scsi hard drive for web proxy ???
Replies: 14
Views: 4008

Re: Can i use a scsi hard drive for web proxy ???

v3 supports 2Gb of RAM
That's what i meant :-)


Greets,
uebi
by uebi
Thu Jan 10, 2008 1:09 am
Forum: Beginner Basics
Topic: Can i use a scsi hard drive for web proxy ???
Replies: 14
Views: 4008

Re: Can i use a scsi hard drive for web proxy ???

yes i have just 1 gb of ramm but i put another gb to have a better performance The point is that I'm not sure if more than 1 GB is supported! It will boot of course, but I don't know if 2.9 will actually USE anything above 1 GB??? I know there was a 1 GB limit some time ago and I believe that more ...
by uebi
Wed Jan 09, 2008 5:36 pm
Forum: Beginner Basics
Topic: Can i use a scsi hard drive for web proxy ???
Replies: 14
Views: 4008

Re: Can i use a scsi hard drive for web proxy ???

thanks also another quiestion do i need more memory actually i have 1gb do i need more ramm?? or it¨s fine?
BTW... Is more than 1 GB of RAM supported in 2.9 at all?

Greets,
uebi
by uebi
Tue Jan 08, 2008 4:48 pm
Forum: General
Topic: Feature Suggestion: SIP proxy / siproxd
Replies: 9
Views: 6922

Re: Feature Suggestion: SIP proxy / siproxd

Please don't turn MT into a phone system. That's my opinion, too!!! I don't need all this voice ports and codec stuff, I just thought if the implementation of a SIP Proxy wouldn't be too much work, it would sometimes be helpful. As a separate package of course, so that people can enable or disable ...
by uebi
Tue Jan 08, 2008 11:16 am
Forum: General
Topic: Feature Suggestion: SIP proxy / siproxd
Replies: 9
Views: 6922

Re: Feature Suggestion: SIP proxy / siproxd

Well, I don't need all this fancy telephony stuff at all, but a simple SIP Proxy would be nice. With 7941s etc you sometimes have symmetric NAT issues and a SIP Proxy would do the trick.

Greets,
uebi
by uebi
Mon Jan 07, 2008 5:23 pm
Forum: General
Topic: Feature Suggestion: SIP proxy / siproxd
Replies: 9
Views: 6922

Re: Feature Suggestion: SIP proxy / siproxd

Nice idea!
This might also help to get my standalone SIP Cisco 7941 to work without an Asterisk on my LAN :)


Greets,
uebi
by uebi
Wed Jan 02, 2008 11:47 pm
Forum: General
Topic: Routing Mark Problem/Question for incoming connections
Replies: 11
Views: 1519

Re: Routing Mark Problem/Question for incoming connections

I already read it, but I'm still not sure why you need a portforwarding for Winbox ON the MT?? Do you have ADSL-Modems (Bridge) oder ADSL-Routers in front of the MT? I never had any issues getting onto my MT with this config when the public IPs ar ON THE MT, not in front on the ADSL-Router! If your ...
by uebi
Wed Jan 02, 2008 12:51 am
Forum: General
Topic: Routing Mark Problem/Question for incoming connections
Replies: 11
Views: 1519

Re: Routing Mark Problem/Question for incoming connections

Sorry, I was away from my computer.

I don't have MSN here :-(
E-Mail?


Greets
by uebi
Sat Dec 29, 2007 11:47 pm
Forum: General
Topic: Routing Mark Problem/Question for incoming connections
Replies: 11
Views: 1519

Re: Routing Mark Problem/Question for incoming connections

Does your MT have the public IPs assigned to its interfaces and did you just replace them in your post to not show them? Is it a DSL MODEM or ROUTER? Basically, I have both public IPs directly on my MT (static and pptp) and therefore I don't need any portforwarding/marking/whatever to be able to acc...
by uebi
Sat Dec 29, 2007 7:35 pm
Forum: General
Topic: Routing Mark Problem/Question for incoming connections
Replies: 11
Views: 1519

Re: Routing Mark Problem/Question for incoming connections

Sure. Just replaced the IPs and addes some comments. The 3 routes. I got one more static route for a network I always wanna reach via Upstream1, but I didn't paste it here. /ip route add comment="Gateway for upstream1 markings" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=1.1.1.1 routing-mar...
by uebi
Wed Dec 26, 2007 4:22 am
Forum: General
Topic: Routing Mark Problem/Question for incoming connections
Replies: 11
Views: 1519

Re: Routing Mark Problem/Question for incoming connections

I tried about an hour, than I posted the topic and a few minutes later, I found out that I just have to add the "default" gateway again without a routing mark. Well, it's far past midnight here ;-) Thanks, uebi PS: I didn't delete the topic, because maybe somebody has the same problem some day. If t...
by uebi
Wed Dec 26, 2007 4:16 am
Forum: General
Topic: Routing Mark Problem/Question for incoming connections
Replies: 11
Views: 1519

Routing Mark Problem/Question for incoming connections

Hi there! I'm writing this topic via my routerboard that has 2 internet connections (DSL and Cable, 2 default gateways with different routing marks). I do some marking to do tcp port 80 over the DSL line and everything else over cable. Works fine, I surf the web via the DSL line, do my ssh stuff via...
by uebi
Tue Dec 11, 2007 1:04 pm
Forum: General
Topic: Accounting - ip.cgi not found??
Replies: 3
Views: 2354

Re: Accounting - ip.cgi not found??

Woohoo, works like a charm! :-)

I have to admit that I never looked there, I thought the path might have changed in 3.0 and never checked via the CLI if the enable takes effect *duck*


THANK YOU SO MUCH!


Greets,
uebi
by uebi
Tue Dec 11, 2007 10:39 am
Forum: General
Topic: Accounting - ip.cgi not found??
Replies: 3
Views: 2354

Re: Accounting - ip.cgi not found??

No reply? :-( I really need accounting (or more specifically the accounting web access) to be running until tomorrow and I hope that downgrading to 2.9 isn't the only solution.... I'm sure that somebody out there knows the "new url" to ip.cgi, but why don't you tell me? Do you hate me? ;-) Thanks, u...
by uebi
Mon Dec 10, 2007 11:34 am
Forum: General
Topic: Accounting - ip.cgi not found??
Replies: 3
Views: 2354

Accounting - ip.cgi not found??

Hi there! I have a couple of 2.9ers (x86 and RB) running and accounting traffic, but last week I upgraded one of them (x86) to 3.0rc11 and it doesn't work anymore :-( Accounting is enabled, web access is enabled and even accessible from 0.0.0.0/0, take snapshot shows the traffic, but when I try to a...
by uebi
Mon Jun 25, 2007 11:54 pm
Forum: Scripting
Topic: Local versus Abroad Traffic
Replies: 1
Views: 902

Re: Local versus Abroad Traffic

Hi again! I just got an email that I should attach the link to my script to the wiki article which brought me this idea. Reason for that isn't the great code *G*, but the guy who sent me this message had problems with finding a current list of IPs assigned to his counrty. My script solved this probl...
by uebi
Wed Jun 20, 2007 12:35 am
Forum: Scripting
Topic: Local versus Abroad Traffic
Replies: 1
Views: 902

Local versus Abroad Traffic

Ahoi there! Referring to the "Local vs Oversea Traffic" How To in the wiki I used my sparetime today to make a script for doing this automatically. It's not MT scripting, just some ugly shell scripting (I'm NO programmer *G*). For my own purposes I stored it on my website, maybe it's helpful for som...
by uebi
Wed May 09, 2007 4:38 pm
Forum: General
Topic: Per port rate limiting
Replies: 13
Views: 7122

For simple queues, but are there any options available to the /interface set command? Or does it just drop everything above the limit?

Thanks,
mfg uebi
by uebi
Wed May 09, 2007 4:23 pm
Forum: General
Topic: Per port rate limiting
Replies: 13
Views: 7122

I'll keep that in mind :-)

And sorry again for the wrong explanation.


BTW: Do you have some more info for me how this limiting works? Is it dead sharp, are bursts allowed and how does it handle traffic that is above the limit?


mfg uebi
by uebi
Wed May 09, 2007 4:10 pm
Forum: General
Topic: Per port rate limiting
Replies: 13
Views: 7122

Hmmmm, to be honest, when I read my own posting I see that maybe I explained it a bit wrong... With PORT I actually don't mean a port like 21, 22, 80, 53, 443, ... I DO MEAN a physical port, like ether1. An interface so to say... Please excuse my wrong expression :oops: My aim is to just attach the ...
by uebi
Wed May 09, 2007 2:20 pm
Forum: General
Topic: Per port rate limiting
Replies: 13
Views: 7122

I apllied "/interface set 0 tx-rate=400000 rx-rate=400000" and a "/interface monitor-traffic ether1 once" shows something like this received-packets-per-second: 227 received-bits-per-second: 454.4kbps sent-packets-per-second: 291 sent-bits-per-second: 446.3kbps The ping becomes very high, because th...
by uebi
Wed May 09, 2007 12:31 pm
Forum: General
Topic: Per port rate limiting
Replies: 13
Views: 7122

Well, this command actually DOES some reate limiting, not very accurate although. I'm just wondering how it is done, if there are any bursts possible, if it drops or queues, ...


mfg uebi
by uebi
Wed May 09, 2007 2:33 am
Forum: General
Topic: Per port rate limiting
Replies: 13
Views: 7122

Per port rate limiting

Hi guys! First of all: Don't hate because of another stupid rate limiting question, I did search, but I didn't find an answer :) The point is that I don't wanna limit a single IP, application or something, I'd like to limit the 100mbps port which is connected to my switch. Normally I would do that o...
by uebi
Tue Oct 03, 2006 12:53 pm
Forum: General
Topic: Howto display counters on the cli
Replies: 2
Views: 2452

It would have been so easy :-)

Thanks!!
by uebi
Tue Oct 03, 2006 12:23 pm
Forum: General
Topic: Howto display counters on the cli
Replies: 2
Views: 2452

Howto display counters on the cli

Hi there!

I'm sorry but I just don't know how I can display the counters on the command line. Is there an option to show it or do I have to use the winbox?

Thanks,
Have a nice day

uebi
by uebi
Fri Sep 22, 2006 2:14 pm
Forum: General
Topic: Too stupid for VLANs!
Replies: 2
Views: 1322

Hmm, started from the beginning, updated the firmware of the switch and used my brain a bit more - now it works!

I should have been starting over before wasting 3 hours... *G*


Thanks,
mfg uebi
by uebi
Tue Sep 19, 2006 4:29 pm
Forum: General
Topic: Too stupid for VLANs!
Replies: 2
Views: 1322

Too stupid for VLANs!

Hi there! I'm replacing my unmanaged D-Link 24 port switch and MT 2.8 with a Linksys srw224g4 managed switch and MT 2.9 So far, so good, but my target is or was to configure every port on the switch as a seperate VLAN (101 - port 1, 102 - port 2, ...) and attach it via the gbit uplink to a intel gbi...
by uebi
Tue Sep 13, 2005 5:37 pm
Forum: General
Topic: High CPU Load
Replies: 3
Views: 1066

High CPU Load

Hi there! Since I didn't find a solution to my problem in the past posts I just have to make a new one ;-) I have a 2.9 Mikrotik Router (2.4 GHz Celeron, 512 MB RAM, Intel NICs) with 2 connections to 2 different ISPs. Both BGP Peers are up an running, but since today, the router has a load of more t...