MikroTik

raminmalek

Hi every Body after unplug my sxt ethernet Changed POE and adapter but problem is exsist
I guess Changed Eleman On PCB radio SXT-lite For repair and plug Lan
Whitch IC or eleman Must be changed For repair My radio ????
Please help me???

raminmalek

Drawing1.jpg Hi Dear Friends I have 3 link Between 2 mikrotik connection type is PPPOE now i have load balancing by 1 specific username over 3 links ( aggregate 3 links ) PPPoe server and client is mikrotik in Client so add 3 interface in PPPOE-Client-Connection Now on server side How can do this ?...

raminmalek

Hi
How can See My advetise Prefix By Prepend in mikrotik

I test print advertise peer-name detail Show my only Community Number
Donnot Show me prepend That inject to Prefix my mikrotik

How see number For prepend For prefix ???

raminmalek

If use filter For prefix Control any idea For donnot change Community ?

raminmalek

Hi In router-OS For example X86
How Mirror eth-1 to eth-2 ?
Router-OS donot have Switch package To config mirroring
can I do thsi by firewall Or other idea?

raminmalek

Hi Dear Friend If Annonce ip prefix To the Mikrotik router For example Community 2222:2222
this Router Annonce to uplink by no Community How In mikrotik Donot Rewrite Community ?????

raminmalek

Hi Dear Friend When in my Netowk Get DDOS attack Torch For detect Src Ip address and protocol and port For block

But many IPS donnot have Port For connection Only Detect ( 17 udp ) No source port no Destanation Port

What happend ? Please help
What THIS connection type ?

raminmalek

Hi Dear Friend How connect two 24Volt Adapter To 1036 For Redundance Power ???

Thanks For help

raminmalek

Hi Dear Friends I mikrotik In mikrotik How detect Malware ip socket (ip + port ) Scanner I used CCR-1072 Prefer For detect Use Netflow and combine with Collector For detect Ip address That want Scan My Ip range And port
Can any body Sugget Netflow Anlyzer and Customize Rules?

raminmalek

Hi Dear friend
I have Router CCR1036 With 6 10G inteface in bondin by switch and have 1 bgp for get Routes Diable Nat
My router Only Forward 17Gbps Throughput (no queue no Firewall Rules )
Can Some Body Help me Have experience About CCR-1072 For Max Throughput
THX

raminmalek

simple Queue Added By max Limit 15G Bit Bw Upload and Download

raminmalek

Hi Dear friends

Mikrotik Max limit Support until the 4G BW now i want limte BW oF VLAN to 15G bit in CCR-1072 How implement This by mikrotik ?

Can some Bony Help Me ?

raminmalek

AnyBody Have Idea???

raminmalek

Hi Dear Friend I have Router CCr1072 I connect to Switch nexus 3000 I get FCS error on link Change module and fiber Cable But still Get FCS Error
Can anybody help me ????

raminmalek

How Increase PoD For vlan 100 Example By switch ??? Please Share me Solution

raminmalek

I have I BRAS mikrotik I want Sperate PPP users Authentication by Domain to two Different Radius Server How impelemnt This by mikrotik ???My BRAS IS router CCR1072

THX

raminmalek

Hi Dear Friends I have Problem With mikrotik Radios If used Only Bridge Wlan and Ether When Connect Cable To switch cisco Switch Get Loop Detect and Err-Disable The port When Used WDS and dynamic wds Enable on Radios Donnot Get This loop and Trunk Work Good Please Tell me why this is happen In mikro...

raminmalek

Hi Dear Frineds I have 2 PPPOE BRAS SERVER with same POOL LIST FOR Example pool 192.168.0.2-192.168.0.254 BRAS 1 pool A 192.168.0.2-192.168.0.254 BRAS 2 pool B 192.168.0.2-192.168.0.254 RUN BGP Between 2 router And Redistributed Conncted routes NOW my problem is two BRAS Assign Same IP address to Us...

raminmalek

Hi Dears Friends

I user Simple queue and Queue Tree i limited Ip range on 900Mbps But uplink useage 1050Mpbs 1.05 Gig
I change Queue Size to 25 Queue Have Drop but Uplink Bw usage have 10 percent more than Queue Limited IPS

Please help

raminmalek

Hi Dear I used Siample Queue Cpu is 100 % My Friend Tell me Used Quee Tree Cpu Reduce I used Queue tree and Tag packet But Cpu still 100 % Whend Disbale Queue cpu reduce to 20% Forward Onlye Traffic And BGP Tables I change Queue Size From 10 to 20 and 30 and 40 and 50 Packet In pfifo Used Bfifo By d...

raminmalek

In mikrotik that Do not support Prefix-LIST For bgp i add For everey prefix Rules Now problem is For set community no-export Number range For chain number 40 to 1000 How set id Range when use this [admin@IXP-Router] /routing filter> set set-bgp-communities=no-export numbers: HOw Cane Number IS range...

raminmalek

Hi My transit Operator Netwok Max mtu on the switch supported 1500 I Cannot used MPLS For USE mtu Transfer switch max mtu 1508

IF used VPLS my mtu routing Must be 1530
Correct ??

raminmalek

HI Dear Friends I used mikrotik and EOIP Tunnel For Layer 2 Connectivitiy And Terminal PPPOE Connection To the PPPO-Server

EOIP Over Head IS very large And my Network layer 3 is congest
DO you Any suggestion That Replace EOIP-Tunnel To Decrease Over head An Router Resouces Usage

Thx

raminmalek

Hi dear Friends I need add any desk servers
*.net.anydesk.com

To address list to access or bypass From my Cache in mangle

Ho add This *.net.anydesk.com ro address list for used and bypass

raminmalek

How config Flow Active timeout in Active timeout Cache Entrie Template Refresh and Template Timeout That Fastnetmon Recieve Correct By netflow Version 9 I Set In Fastmon average_calculation_time = 65 average_calculation_time_for_subnets = 65 And Active timeout Flow 60 Second Fastnwtmon Show me Incom...

raminmalek

Hi Dear
When Install Grafana Server in Access mode only Server and Browser mode

raminmalek

Formatting disk...
ERROR: could not format partitions
Press ENTER to reboot

raminmalek

RouterBOOT booter 3.39

CCR1036-12G-4S

CPU frequency: 1200 MHz
Memory size: 10240 MiB
NAND size: 2048 MiB

loading kernel... kernel not found or data is corrupted

raminmalek

I have 1036-4s-Em Kernel load failed When i Want used netinstall See the problem ERROR: could not format partitions And rebooted I Format NAND and done successffly But Problem Still exist How solve this and Install Router OS on my nand Booter Version is 3.29 I used netinstall 6.44.6 and try by 6.43....

raminmalek

Hi Dear
I have 3 vrfs (routing table ) and routing table main

I want copy Routig table some Vrfs to main table Or upside down

Ho can do this ????

raminmalek

Hi Dear Friend i need script that use Spectrum Anlyzer and For Example 24 H So say best Center frequecy For this Radio

Thx

raminmalek

Hi Dear Friend i have 2 ether On mikrotik that i want add to bridge withc switch cisco
Port 1 Primary Port 2 Salve
If ether1 down Automaticly Traffic switch to port 2
Now i enable stp and set patchcost port 2 to 40
But i have Loop Between 2 ports
How solve this??

raminmalek

Hi Dear Friend I used Simple queue For limit 2G BW on 1072 Router Cpu is High Now suggest to me limt BW By quee tree ( mikroitk suggest used Queee Tree mark Packet ) Now do this chain=prerouting action=mark-packet new-packet-mark=Nakhl-IN passthrough=yes dst-address-list=nakhl-IPS in-interface=Inter...

raminmalek

Hi Dear Friends I have CCr-1036 and CCr1072 When Set Ip or Subnet In target Simple Queue CPU Increase Now replace In Target Physical Interface OR vlan on User Cpu Decrease and Normal I use router-OS 6.44.5 Why see This Effect From Cpu Of router?? I have this problem only on Tile Cpu 1036 and 1072 Pl...

raminmalek

Hi Dear I do this

But iF add Simple Queue and Set Target Ip address or Subnet My CPU become to 70 Percent

I Use Rouer-OS 6.44.5

When Set Target VLAN of user Cpu is normal

Ho fix this
This is BUG of router -OS ????

In the old version i donnot have this problem

raminmalek

Please share with me Scripe base On reviece-From I used Find where recieve-from=BGPPeer1

Nothing add to address-list

raminmalek

Please Share With me optimum Script

THX

raminmalek

How add Prefiexs Recieve Form BGp peer To address list firewall

raminmalek

hi dear Friend i have mikrotik Radios Now i want

How check Radios Card Health For get max Tx-power
???

raminmalek

any solution ???

raminmalek

Hi
I Have Radios Groove and SXT series

Radio boot by Lan no plug or if plug speed 10Mbps

Which eleman must change on board of radios Fix that

raminmalek

In hotspot redirect 443 To 64785 and

If users wnat https://google.com Redirect To login hotspot Page

I want implement For my router adn Work

raminmalek

Hi Dear friend

How Can Redirect SSL sites For example google.com yahoo.com to example.com by mikrotik
????

raminmalek

Hi Dear I post Visio For my toplogy

raminmalek

Hi i have mikrotik Wiless link that Uplink on 2 switch cisco So i want Bridge link pass all VLAn on trunk is work My problem is Only see Radios Ap and Client On VLAN 1 Native VLAN I want See Radios For example On vlan 100 And the Trunk Cross all VLan If tage vlan 100 on WLAN interface Trunk Disconnect

raminmalek

which one IC For manage Ethernet

When connect Router and Plug cable And Forward Traffic router Rebooted

raminmalek

Hi Dear Friend I have CCr1036 My router Random After Forward Traffic Rebooted I Changed Power Supply And Ram but Still Rebooted I test By traffic Generator An cpu 90% router Not Rebooted When Plug Cable An Forward Real traffic by Cpu 2% routed Rebooted i Upgrade To Log-Term Version but Rebooted stil...

raminmalek

I donnot have any firewall rules is reject default
traceroute only packet reject origin by linux OS

when search in google see linux Os use Udp protocol for traceroute

raminmalek

Hi dear Friends if you use command traceroute in linux
Linux Os use udp packet for traceroute when your hop in router Os by default show !x admin limited and traceroute packet dropet

Why mikrotik do this

thanks for your reply

raminmalek

There is a feature request in this page http://wiki.mikrotik.com/wiki/MikroTik_RouterOS/Feature_Requests to solve all of these type of problems . just search for "PPPoE Options just like DHCP Options" in the feature request page and vote for it . Hi dear Omid Any feature added For this an...

raminmalek

any solution Develop by mikrotik ???

raminmalek

Note If my ASR1002 Router Forward traffic To uplink CCR-1072

No Simple Queue show me fake traffic

raminmalek

Hi Dear Firend I have 3 Routers qos policy set on Router Edge -CCR1072 Now When Router 2 foward Traffic To router CCR-1072 In simple queue Limit Ip address (target) with set DST My uplink-internet VLAN When edit and Dst 0.0.0./0 in simple Queue QOS policy no working truenAnd Reduce trafiic of Ip add...

raminmalek

Thx but i have Cacti and prtg and observium server

raminmalek

Have any solution For monitor Bgp session by cacti ???

raminmalek

By cacti tested show me fake graph

Any solution ???

please?

Attache Resource of my 1036CCR-router

raminmalek

In this bug fix version when get Traffic Graph show me 30Mpbs but relay Live show in winbox see 140Mbps

In quese show me IPs used for example 100Mbps but on user interafce have 20Mbps traffic

I attach screen shut of this problem

i queues have same problem

raminmalek

I change Bucket size but problem still excists
change queue type To bfifo and pfifo and change Queue size

raminmalek

I tested this version on CCR1036 work fine !

raminmalek

in version 6.40.8 on CCR-1072

I add simple queue with 300M bw but my Ip address set on target user 200M when i disable Queue Ips work true

On this case queue show me 300M but user used 200M
i change pfifo and bfifo size but problem still exists

Pls help me Friends

raminmalek

File sharing Port 137 139 138 Layer 2 Netbios Protocol

445 Used Layer 3 and Forwared Between Routers

raminmalek

Traffic On my router is Forward To other hop (My router Forwarded Traffic To other Routers )

Donnot terminate Samba traffic on my royter That i write DST nat or other Rule

My question is My router donnot Forward File sharing traffic To other Hops

raminmalek

On layer 3 windows file sharing used port tcp 445 i accept this port file one rule tcp src one rule dst port

But until \\IP address no access to file server

Please help me

I use router OS version 6.40.8 (Bugfix only)

raminmalek

Have any answer ???

raminmalek

Hi Dear friend Please Suggest me best flow collector For monitor mobile APP instagram telegram whatsapp

By send IpFlow mikroTik to them

THX

raminmalek

Hi Dear Friend

How add Ips that ADV By specift BGP peer To address-list i want To RUN this By script and update every day

THX

raminmalek

I have router OS 6.39.3

I see this error

failure: already have such entry

raminmalek

after auth in hotspot mikroitk user address invalid change to ( to address ) valid Ip address

No my question How run my bgp session betwheen my router that exchange routing table note: to address not connected route

THX

raminmalek

Hi dear when my User get ip Valid address Note: user before auth have Invalid ip address and after auth change Ip address To valid Ip address Now i have question Clienst Connect with Invalid ip address to Hotspot Router mikroitk Now when change ip To valid address What is situation Routering Valid I...

raminmalek

How edit Filter And write Regix that only advertise Prefixs Origin OWn AS number Please help me ???

raminmalek

Hi dear Friend i have Tunnel Gre that reachable multicase 224.0.0.1/24 by ip 192.168.1.41/30

in my netwotwok have VOD server that access to this ips How add route By PIM That access to multiCast IPS ???

raminmalek

Any response to my problem ???

raminmalek

whitch version ok for TILES cpu ???

raminmalek

hi today i check ping 4.2.2.2 but timeout My internet connection and bgp session is ok ny my router on version 6.38.7 do not able to ping own ip address and back time out Other devices on my network can be ping the router CCR-1072 By my device can not able to ping others i test by traceoute Tracerou...

raminmalek

How send Flow Of dynamic interfaces onli like ppp pppOE sstp

raminmalek

please add this feature to new release

raminmalek

Mikroitk support cisco feature like Flow

why do not support ISG feature cisco ????

raminmalek

can i use not interface in traffic flow???

raminmalek

i Test action for first rule must be acceprt for allow Prefix and disacrd any

Than For another peering jump ro olders chain be defined

raminmalek

How set traffic flow for PPPOe interfaces only :note this is dynamic interfaces

raminmalek

So I define Prefix filter on first prees and another Peers jump ro first rules define ????

raminmalek

Hi dear fiend i have many prefixes that announce to internet

When run new peer i write filter to one by one prefixes

can i used prefix list like address list firewall and accept prefix list to peers???

raminmalek

The PPPOE servers and IP Flow on deffirent vlans

raminmalek

I use version php-5.3.3-49.el6.x86_64

For code install apache and php only

Install putty

the webserver havenot any log in router

raminmalek

I setup by https://github.com/TomHetmer/MikroGlass ... P-version)

Install putty and update config file by not work

Whitch version Of Php Used for this code??

I see php.ini

Disable function is empty LINE

raminmalek

I use Extrenal power Supply

THX

raminmalek

Hi dear Friend when open box CCR1036

You See 2 power Connector

My questin is
Can use connector 2 For Backup power ????

raminmalek

My cpu usage is 17 percent

raminmalek

Hi Dear Friend

When Active ip Flow on any version

My PPPOE Clinets connect To my mikroitk Router Very Slowly

So when Disable Ip flow is ok

How solve this problem

Thx

raminmalek

i think use regex for filter by as path

raminmalek

Hi dear friend I want Sperate traffic of Origion route or traffic pass route Form examle AS number 123 I wrote filer that bgp as path (regular expression ) _123_ for traffic transit form as 123 What to do now ?? set route mark and set new gateway for marking route traffic is not work please help me ...

raminmalek

show ip route Or show ip BGp

when you do this command for prefix show As-Path String

Equal this command in mikrotik that show all As-path For prefix and show burst route

Thanks

raminmalek

How i want to write Rule That Filter By ASpath in mikoritk

Conditions
As-patch lenght 3 or 4

Aspatch=10:20:xxx:xxx

XXX any As number

Thanks
AS 10 router level1 (Uplink AS20)
AS 20 Router level 2 (Provide Internet and announce To IXP peers)

raminmalek

what is the best version off router-os that work true???

raminmalek

After 1 day working is normal

I think this is bug

raminmalek

default-profile="PPPOE SERVER MIKROIK" disabled=no interface=\
MahanCity-Wifi-VLAN78 max-mru=1480 max-mtu=1480 service-name=\
Mahan-Wireless-Users-VLAN78

Export PPPOE-server For this VLAN

raminmalek

Yes is runing or enable

Vlan number 78 is R (ready)

Attach picture also

I say PPPOE server is work and clinet connect on this vlan but on my router is red Line

3006 R MahanCity-Wifi-VLAN78 vlan 1500 1576

raminmalek

Hi dear friends i used router-OS 6.38.7

For example I run pppoe server on vlan 78 and define on my switches the vlan number

Problem PPPOE is work but in wibox is red

Status is Enbale allso

I Attach Picture

raminmalek

see this link pls
http://blog.ipspace.net/2013/01/tcp-mss ... hy-do.html

raminmalek

yes

My question is if my tunnel mtu 1480 and enable Clamp tcp mss

whether automatly Change packet TCP mss to 1440???

raminmalek

I add bgp peer with my uplink and advertise prefix filters Rules is true

in peer 1 see prefix without ASpath is ok

in peer 2 see perfix with ASpath my router right side is not ok

raminmalek

Clamp TCP MSS

Do Change automaticly MSS over MTU tunnel????

raminmalek

IP tunnel overhead is 20 bytes this is true????

and gre 24 ???

raminmalek

For Example I tested and My connecetion MTU is 1450

Which MTU size set on IPIP or GRE tunnel set ????

THX

raminmalek

My Tunnel Over ethernet PORT On my switch my switch MTU IS 1500

But when RUN tunnel WITH mtu 1480 but have problem

raminmalek

I use 1480 for IPIP MTU

Are you suggest MTU For IPIP For reduce Overhed???

raminmalek

Hi Dear Friends I run IpIP tunnel But on local Router (TX router) Show TX rate live by winbox For example 400 M same time in remote router (RX router) see RX rate this is 387M 400-387=13 in this case we have 13M Difference I test on EOIP tunnel with mtu 1500 Difference is worse Can you explain to me...

raminmalek

In this Article You Shared Ports

100.64.1.1 2.2.2.2:2000-2099
100.64.1.2 2.2.2.2:2100-2199
100.64.1.3 2.2.2.2:2200-2299
100.64.1.4 2.2.2.2:2300-2399
100.64.1.5 2.2.2.2:2400-2499
100.64.1.6 2.2.2.2:2500-2599

raminmalek

:global sqrt do={ :for i from=0 to=$1 do={ :if (i * i > $1) do={ :return ($i - 1) } } } :global addNatRules do={ /ip firewall nat add chain=srcnat action=jump jump-target=xxx \ src-address="$($srcStart)-$($srcStart + $count - 1)" :local x [$sqrt $count] :local y $x :if ($x * $x = $count) d...

raminmalek

For 2G Bw i Donot USE scripts

Feature must be added like SRC Nat

raminmalek

Hi Dear Developer Why mikroitk OS donot Support Feature Nat 444 ????

raminmalek

Which Version Mikrotik for CPU tile solve this problem and dont show 00:00:00:00:00:00 mac in my ARP list

raminmalek

Please Suggest Me best Free Radius proxy For use Multiple Radius server

Thx

raminmalek

Thanks For reply

1- I want use For only PPPOE Auth users

Explain My Router Auth user From Radius 1 If failed Or invalid username Or timeout Next Request send to Radius Number 2

raminmalek

Hi Dear friend I want define 2 radius server that some users auth radius server 1 if not available in this radius affter timeout time define request send to radius server 2 defined in my radius servers I define but No send my BRAS any traffic and request to radius 2 For users auth Please Help me I d...

raminmalek

I need ISG FUnction for PPPOE users FOR dirrent sites Decrease Creadit

raminmalek

Mikrotik Support ISG feature ????

if not support Please Add in new version

raminmalek

I donnot user spamthus and other spam list i must use http://www.ipdeny.com/ipblocks/data/countries/

And the file .zone format

and the cafe2002 code not working

raminmalek

Hi dear friend I want deny Ip address form specify Country Form http://www.ipdeny.com/ipblocks/data/countries/ Deny in my router I see this link http://forum.mikrotik.com/viewtopic.php?t=83910 But Problem is how Detachment Range on Ips in txt file Now when This scripts add only range in line 1 and e...

raminmalek

i Have npk file i need to editor files

raminmalek

Hi dear friends I have Mikrotik Hotspot That Connected To the radius Server For user Auth But i have one problem for begin assign ip addres 10.10.243.254 to user for login in the Hotspot Login page after auth Assign Radius Ip Valid 80.91.191.60 to User but User No routed to the internet How can fix ...

raminmalek

in want customize terminal cLI replace mikrotik by custom name in terminal

customize winbox menue

and more

i see edit 2 npk file by linux editor and upgrade device by this file

then customized

raminmalek

Explain more please

raminmalek

How can I customize Mikroitk Router -OS Environment ???

raminmalek

Import MIB and see by library in prtg non show me queue CPU usage and uptime

See the image please

raminmalek

Hi I need MIB file on OILDB file for monitor Queue health Temp Cpu and etc Mikrotik By prtg Please Share with me The files

raminmalek

In package Uninstall it

But in feature calea in firewall/calea in Exist

raminmalek

Hi I am Removed Calea package In system package But when ln command lin typed filewall/calea

existence .

How remove it complete From my router i use 5.26 Version

raminmalek

I have 2 Gateway I want use gateway 2 used when my user donwload file for example mp3 flv mp4

How can get this from firewalll mikroitk ( Donnot use Web proxy and usepatch )

thank you

raminmalek

Hi every boady

when i runing Bw test on my ethernet Ip show Me 200M

whne i creat tunnel over ethernet and runing on EOIP address Shoma Me 70 M

How can fix this Change MTU on Tunnel?

raminmalek

No Answers?

raminmalek

Ho Dear Firends I have CCR1036 To hotspot gateway but cpu is 76% I see in the Log some users have very very log for login to hotspot

No my question is How limit Maximum Concurrent login in hotspot mikrotik?

thanks for Your help

raminmalek

Hi Dear Frineds
i installed X86 router Os on Hp Server And Buy Licence Level 6 For It

My surfing speed Be low and when i wnat Upgarde my router Drop Files on Files mikrotik and Reboot But Nothing Do
Router OS Dont Change after restart

can you help me
what To do?

raminmalek

Hi again Dear friends if you have any article or ebook or pdf about how config proxylizer for save log user and router command that send logging to proxylizer

share me please

Is this Rule compatible with web analizer IBS ng accounting????

thanks

raminmalek

Hi my friend i think Use Proxylizer Log server to send my user log and save

now my question is?

i need proxy server for what ??
or can i user mikroitk webproxy server or not

absoultly user squid cache server

???

raminmalek

HI Dear Friends

in my netwok i have cache server IBS accounting In PPOE server that Use mikroitk Router OS

now i want have LOg URL my useres

what am i do???

user Proxilizer Run Proxy server on mikroitk and logging send to proxylizer

OR
other plan
Help me friends?

raminmalek

Hi dear friends

how edit manuallyip sec for l2tp connection in mikrotik

THX for your helps

raminmalek

Hi Dear frineds

i Choose role input and the write mac and action drop in my router but this not work

the mac try to etablish ppoe coonection by diffirent user or pass

how drop this mac

thank you

raminmalek

Hi how are you Dear Friends I have 2 link from different internet provider that hast 2 range ip for example link a : 208.122.20.0 link b :98.25.20.0 i want Config ip route if once of link is down The valid ip this link can route from other link if link 98.25.20.0 is down these ip can route and work ...

raminmalek

I dont user web proxy roll for mikrotik .is gateway of my network

raminmalek

Thank For your reply to my question

i think USer Patch in mikrotik for select Format and mark packet The route market packet between 2 gate way

True Idea?

raminmalek

HI how are you? I Have 2 dsl line with different ip address i want Redirect web traffic on gateway 1 and download item Like mp3 avi ...... To gateway to i think do this with patch and mark packet then redirect packet to diffrebt gateway Friend can you help me and explan to me how to config this with...

Search found 142 matches