any clues maybe on how one can get cake not to reboot(kernel panic) a ccr1009? lowered mem usage(1mb) and seems to be stable with few queues enabled(20) but anything more and it keeps restarting.
Guys maybe im doing something wrong here did a upgrade over the weekend... all was working no problem ... i have a highsite with 2 antennas showing to another site.. One is my highspeed link and another is the backup. so from this weekend for some reason the ospf keeps reiniting every few seconds bu...
Hello guys are some of you running cake on breakout RB5009?? Previous time i tried it moment one puts in total limit above 100mbp the router reboots randomly when running for a min or two...
Hey man you can just make multiple telegram scripts and then just apply them to the devices you want.. so windows devices will have there own bot and so will linux ..
Hey guys been running 60GLHGG for about 7 months now ....not very stable when it rains but runs well otherwise. The link is 3KM long so it is a bit far. I loaded 6.47rc2 yesterday and the link kept dropping nothing changed on the link just the software. Question is I know they changed something on r...
April fools is coming around again...they havent even confirmed that they working on v7 as far as i can see... but hopefully one of these days... Edgemax is taking over in some cases...but i find that mikrotik is easier to configure ...
Hallo guys hope you could help i see that my pcq queues the parent queues arent showing the sum of the child queues when doing contention?? some are showing but only like 2 or 4 ...attached is a screenshot... as you can see there are far more people busy than is actually being displayed. The parent ...
Did you seem to get the problem fixed? Im having same issue but mine runs for a few hours then has kernal failure and then reboots 4 or 5 times...then runs a few hours again...dont understand.
Hey guys i have also been having some issues with the people doing p2p connections and it is a problem. What i have found is the best way to mitigate this is to do the following 1. Mark connections you know the traffic of eg..http...ssh..email.. 2. Mark the source ips of the guys detected to use p2p...
ok what happened irst is i updated from 6.18 to 6.19 rc .... It booted up and was working.... I deleted a setting and the whole mikrotik interface crashed...now before you say user error. I did the sam thing on 6.18 without anything happening. After the crash the link lights on my x86 box wasnt comi...
attached if the current queue tree that im using. when i have the games queue disabled it doesnt affect the ping so much. Question is will it still affect the latency if there isnt any limit on any of the queues on core routers???current queues only get limited on edge routers not on core routers?? ...
Hallo guys wonder if someone could maybe help me . Im having some issues were if i add game packets to my queue it adds latency to games pings. Moment i remove it its fine again priority is low at 4 and theres no limit on the queue except for master queue. The total queue isnt being triggered. Does ...
I tried 6.19rc but mine kept bombing out in the sense of not booting the network connections?? it would boot but no link on network??has anybody else had this
Very funny preliminary tests show that 5.24 is working ..so far... dont have same issues with throughput. this is now with a stock default config and i just loaded my mangles which basicly just mark ports to go to one gateway. with same setup on v6 it didnt do half the throughput???. What could it b...
Look at your network interfaces. Did they auto-negotiate the right speed and duplex? Do you have any error counters incrementing on RX or TX? Can you describe what throughput you get on the x86 vs the 2011? It is on auto negotiate... i just had a look and i dont see any tx or rx errors. Well straig...
Guys have any of you had a issue yet were a rb 2011 seems to be performing better than a x86 machine??? i have a 6 port x86 machine and for some reason i cant seem to get better performance out of it....reason why i want to go over to the x86 hardware is that it has a ssd in it and alot more process...
K so i have had a look in the bios disabled ctech and hyper threading. On x86 l1 mtu is set to 1500 l2 mtu is set to 9014 and cant be changed. on rb2011 mtu set to 1500 l2 mtu 1598 max I have also checked and all my other rbs and wireless units are all set to 1500 mtu. Will this affect the unit?? cp...
Hello skoenman, Hallo Guys i imported one of those 6 port x86 servers from china with the idea to have it do all the number crunching. Can please coming more clear to the point or what exactly for a x86 machine you are using? Things such as the Producer, Brand, model, model number would be fine! Da...
Hallo Guys im having some issues with my 6 port router 82583V it seems like it doesnt want to send through the data as fast as my 2011 mikrotik. Has anybody else had issues or stuff that they had to change to make it work.
Hallo Guys i imported one of those 6 port x86 servers from china with the idea to have it do all the number crunching. What happens though is that when ever i put the exact setup on it...it seems to slow down tremendously and i cant seem to get the same performance out of it compared to a my rb2011?...
pcc would be your best bet....try looking for mikrotik pcc examples... google is your friend. you can have a look at https://www.google.co.za/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&uact=8&ved=0CHcQFjAG&url=http%3A%2F%2Faacable.wordpress.com%2F2011%2F07%2...
Im having same issue...my one marks the connection fine but when you check it still goes through default route even though its connection mark...output ...routingmark ...
It doesnt want to use that route. ANy ideas ??/ I have tried taking passthrough off but doesnt make any diffrence.
Hey guys the package that you ran on this chipset was it x86 or the other chipsets????would like to know because i have mikrotik 5.25 installed but it doesnt pick up the ethernet ports it shows link but no coms...
OK guys after sitting for 3 days with this i figured it out....jippy. One needs to have the 2 wan interfaces and the lan interface on diffrent ip ranges . this enables you to route the traffic correctly.
Thanks for help.
Hallo guys i have a problem were i have been trying to get my load balancing going between 2 ADSL routers but i cant seem to get the settings to work correctly. from the mikrotik i can ping all surroundings but from my pc i cant ping internet ??? i can ping local interface on mikrotik. Tutorial i fo...