Community discussions

Search found 41 matches

by dipson
Wed May 12, 2010 1:46 pm
Forum: General
Topic: How to convert a MT box in an Anti Spam server with v2.9
Replies: 20
Views: 10919

Re: How to convert a MT box in an Anti Spam server with v2.9

please send me this script without the comment. diposalako@yahoo.com
by dipson
Wed May 12, 2010 1:37 pm
Forum: Scripting
Topic: Hotspot login script
Replies: 15
Views: 9375

Re: Hotspot login script

I am interested in your solution.
by dipson
Sat Apr 17, 2010 4:38 am
Forum: Wireless Networking
Topic: Best hardware options for office AP
Replies: 28
Views: 3547

Re: Best hardware options for office AP

i doubt if mikrotik has sort this n issue out yet, still having some hiccups from d last i read in this forum. send mail to support@mikrotik.com and let us have the response on the forum. wish you all the best.
by dipson
Thu Apr 15, 2010 11:12 am
Forum: Wireless Networking
Topic: I have been testing a new 900mhz card.
Replies: 22
Views: 5321

Re: I have been testing a new 900mhz card.

thank you oldman. i will check that card and check the board as well...xagyl confirm that rb433ah will take 2 of flr24g30 in terms of space and power requirement
by dipson
Wed Apr 14, 2010 8:01 pm
Forum: Wireless Networking
Topic: I have been testing a new 900mhz card.
Replies: 22
Views: 5321

Re: I have been testing a new 900mhz card.

Really, this has won my heart. But Daniel of Xagyl told me that RB433 cannot drive three of this cards (FLR24G30) cos of miniPCI slots space and the power drain. I have found a good alternative to Amplifier.

Regards,
by dipson
Tue Apr 13, 2010 11:19 am
Forum: Wireless Networking
Topic: 1W card with RB433AH
Replies: 3
Views: 811

Re: 1W card with RB433AH

I am surprised Normis deleted my last post along side his. Anyway, I think what you were saying is that this website (http://www.xagyl.com/store/product.php? ... 1&featured) does not support latest Microsoft browser.

Thanks a lot. I think I am ok.
by dipson
Tue Apr 13, 2010 2:11 am
Forum: Wireless Networking
Topic: 1W card with RB433AH
Replies: 3
Views: 811

1W card with RB433AH

Hello, I need someone to advise me on a good choice of 1Watt card that can operate in 802.11b/g and possibly in 82.11n standard. I need a higher card because I am trying all means to avoid the use of amplifiers because of the associated problems arising from such. Hotspot/wifi clients will connect t...
by dipson
Sat Apr 10, 2010 5:47 pm
Forum: Wireless Networking
Topic: RB433ah - 3xminipci cards (2x5ghz, 1x2.4ghz) - possible?
Replies: 7
Views: 1225

Re: RB433ah - 3xminipci cards (2x5ghz, 1x2.4ghz) - possible?

this looks similar to what i am planning. 2km link to 6 stations from three 120degree hyperlink sector antenna on three r52 minipci, that is two clients on a card. ofcourse the board is rb433ah. this is the base. any comments please?
by dipson
Thu Apr 02, 2009 5:27 pm
Forum: Wireless Networking
Topic: 5GHz and 90º@19dBi sector antennas
Replies: 6
Views: 1043

Re: 5GHz and 90º@19dBi sector antennas

It is not a sector antenna but It's also a directional antenna. It is called Patch panel antenna- in my own case I opted for integrated one that allowed me to insert my radio inside the antenna thereby getting rid of antenna cables and the rest. It is has 16degree H & V beamangle. very low wind load...
by dipson
Thu Apr 02, 2009 4:44 pm
Forum: Wireless Networking
Topic: 5GHz and 90º@19dBi sector antennas
Replies: 6
Views: 1043

Re: 5GHz and 90º@19dBi sector antennas

I checked thru Hyperlink (L-Com) Catalogue at a time, what they had is 5.8GHz 17dBi 90 degree sector antenna (I dont know of now) but they had 2.4GHz 20dBi 90 degree sector antenna as at then. Meanwhile, Pacific has 5GHz 19 dbi Integrated antenna and they still work fine for long range.
by dipson
Thu Apr 02, 2009 4:03 pm
Forum: Wireless Networking
Topic: rb433ah interference between mpci cards
Replies: 75
Views: 18301

Re: rb433ah interference between mpci cards

Vspace, This may not appear like what you have over there bcos I am not into WISP. I have a box containing RB433AH. It has 3 R52 mpci, 3 pigtail and 3 secor antennas. This is my base radio and it operates on 5GHz freq spectrum. AIM: Backhaul link to 3 nodes in about 1km distance from the base to for...
by dipson
Tue Mar 31, 2009 11:03 am
Forum: General
Topic: Mikrotik WallPapers
Replies: 15
Views: 7530

Re: Mikrotik WallPapers

:lol: funny topic.... and a relief topic as well.. I tried it on my PC, it's just beautiful. Thanks
by dipson
Wed Mar 25, 2009 10:48 pm
Forum: Wireless Networking
Topic: Problem with ethernet Interface using CAT6 on RB433AH
Replies: 14
Views: 3988

Re: Problem with ethernet Interface using CAT6 on RB433AH

There is no reason why a CAT6 cable shouldn't work with the RB433. I did not say it did not work, afterall I made mention the radio was powered even with about 250m of Cat6. The data transfer over the ethernet interface was the issue. If i am not mistaking, janis cleared the air on that and going t...
by dipson
Wed Mar 25, 2009 11:17 am
Forum: Wireless Networking
Topic: Does 'Burst Time' for wireless do anything?
Replies: 2
Views: 1771

Re: Does 'Burst Time' for wireless do anything?

Leave it as it is.... It it is better to leave it on disabled for performance most especially in a PTMP arrangement. Maybe I will look for the technical details for you later on and the implication of using value. By disable, it means 0. Hope this helps at all...
by dipson
Thu Feb 19, 2009 10:45 pm
Forum: Wireless Networking
Topic: Band 2GHZ-5MHz, 2GHz-10MHz
Replies: 15
Views: 6865

Re: Band 2GHZ-5MHz, 2GHz-10MHz

Thank you for the clarification.
by dipson
Thu Feb 19, 2009 12:13 pm
Forum: Wireless Networking
Topic: Band 2GHZ-5MHz, 2GHz-10MHz
Replies: 15
Views: 6865

Re: Band 2GHZ-5MHz, 2GHz-10MHz

Hope someone will answer this very question from Mikrotik. Meanwhile, can wireless devices like laptops connect to an AP running on either 2GHz-5MHz or 2GHz-10MHz?
by dipson
Thu Feb 19, 2009 12:10 pm
Forum: Wireless Networking
Topic: WDS trhough ethernet or without visibility?
Replies: 2
Views: 528

Re: WDS trhough ethernet or without visibility?

Since you could get all your radios down to the wiredbackbone, I think there is no obvious need for WDS to be enabled. Maybe you should try and describe what you want to achieve by trying WDS initially...
by dipson
Fri Feb 13, 2009 9:18 pm
Forum: Wireless Networking
Topic: high ping time
Replies: 3
Views: 2271

Re: high ping time

It is not advisable to use Nstreme when you enable CSMA. Follow the instructions by Thom.
by dipson
Thu Feb 05, 2009 10:33 pm
Forum: Wireless Networking
Topic: Problem WDS mode
Replies: 4
Views: 749

Re: Problem WDS mode

Is there internet access for the WLan clients that are connected to the "My Wlan Acess Point"?
by dipson
Thu Feb 05, 2009 9:02 pm
Forum: Wireless Networking
Topic: Video Streaming Over WLAN: Best Practice on MKK Radios
Replies: 11
Views: 3483

Re: Video Streaming Over WLAN: Best Practice on MKK Radios

Thom, I had thought of the higher card moreso that there is better performance when I discontinue the Amplifier. I will change the frequency to 2462 to see the result. I cant say if I can get the broadband filter though I will look for it. The regulation does not stop me using such higher card, a fr...
by dipson
Wed Feb 04, 2009 11:21 pm
Forum: Wireless Networking
Topic: Video Streaming Over WLAN: Best Practice on MKK Radios
Replies: 11
Views: 3483

Re: Video Streaming Over WLAN: Best Practice on MKK Radios

Thom, thanks fot the suggestions. I just thought of this, what will be the effect of increasing the WDS default Cost, WDS Cost range on the wireless interface, and the MTU for the WDS interface? I will take the suggestion one by one. in my opinion, the band isnt totally ful. See below the scan resul...
by dipson
Wed Feb 04, 2009 8:52 pm
Forum: Wireless Networking
Topic: Video Streaming Over WLAN: Best Practice on MKK Radios
Replies: 11
Views: 3483

Re: Video Streaming Over WLAN: Best Practice on MKK Radios

Thank you very much for the professional touch. It's been helping alot. It seems I am missing sometin out here. For the data rates, assuming the worst camera connection is 36mbps does that mean I will select 24mbps and deselect other rates or I will select 24mbps and below while deselecting 36,48 an...
by dipson
Wed Feb 04, 2009 10:23 am
Forum: Wireless Networking
Topic: Video Streaming Over WLAN: Best Practice on MKK Radios
Replies: 11
Views: 3483

Re: Video Streaming Over WLAN: Best Practice on MKK Radios

dipson - You are asking a lot and you are asking a lot of the equipment to get the job done....4mbps+ across 3 radios in WDS mode...... I have 4 crossroad Mkk radio connecting to one RB433AH(base) in a AP/WDS mode. For simplification for the end user, I really dont want to do routing moreso, the si...
by dipson
Sat Jan 31, 2009 1:38 am
Forum: Wireless Networking
Topic: Video Streaming Over WLAN: Best Practice on MKK Radios
Replies: 11
Views: 3483

Re: Video Streaming Over WLAN: Best Practice on MKK Radios

Thank you for the direct response Normis . It's really appreciated and may be I will considered that when I am using MKK for another solution/installation but definately not on this particular installation. I am sorry for asking for so much, I think I did not go through the Terms and Conditions of t...
by dipson
Fri Jan 30, 2009 10:09 am
Forum: Wireless Networking
Topic: New Wireless Setup
Replies: 4
Views: 698

Re: New Wireless Setup

I am not into WISP but I have friends that are into WISP and their experience over time have made them stick to MKK for so many reasons(Ruggedity, simplity, result,cost,etc) both at the clients and the AP/Base/ISP end. navigate through the web and stick to this forum. Use the search button and put u...
by dipson
Fri Jan 30, 2009 9:55 am
Forum: Wireless Networking
Topic: RB433AH time keep fall back to 1970s after reboot.
Replies: 9
Views: 990

Re: RB433AH time keep fall back to 1970s after reboot.

The experience has been the same. The effect for me has been that one can not monitor the event log properly. I hope someone will provide a solution to this.

I am employing evetybody to read my post on "Video Streaming Over WLAN: Best Practice on Mikrotik Radios"

Thank you
by dipson
Thu Jan 29, 2009 4:34 pm
Forum: Wireless Networking
Topic: Video Streaming Over WLAN: Best Practice on MKK Radios
Replies: 11
Views: 3483

Re: Video Streaming Over WLAN: Best Practice on MKK Radios

I have waited with no response. Please someone should come up with an idea that will assist me to move on.
by dipson
Thu Jan 29, 2009 9:18 am
Forum: Wireless Networking
Topic: Video Streaming Over WLAN: Best Practice on MKK Radios
Replies: 11
Views: 3483

Video Streaming Over WLAN: Best Practice on MKK Radios

Dear All, I have an ongoing installation. I have 16 wireless IP cameras on a site. I used Mkk RB433AH to connect about 3 crossroads in a WDS link. The RB433AH connects to the switch and to the server. Three of the cameras could connect directly with the base(RB433AH) due to proximity while others co...
by dipson
Fri Jan 23, 2009 11:10 pm
Forum: Wireless Networking
Topic: Problem with ethernet Interface using CAT6 on RB433AH
Replies: 14
Views: 3988

Re: Problem with ethernet Interface using CAT6 on RB433AH

Thank you for that additional info. I am indeed thankful. I will be careful in selecting a cat5e cable, I think there are goog ones in the market here. Chi.a products are all over and ppl opt for them cos they are relatively cheaper. :)
by dipson
Thu Jan 22, 2009 8:11 pm
Forum: Wireless Networking
Topic: Problem with ethernet Interface using CAT6 on RB433AH
Replies: 14
Views: 3988

Re: Problem with ethernet Interface using CAT6 on RB433AH

Dear All, I got this from support[at]mikrotik.com Janis Megis wrote: Hello, AFAIK CAT6 is designed for 1Gbps and up communications - in here you clearly have 100Mpps link. So in this case you must use 5e Regards, Thanks to all that contributed. All I needed is a confirmation. experiment has confirme...
by dipson
Thu Jan 22, 2009 5:44 pm
Forum: Wireless Networking
Topic: Problem with ethernet Interface using CAT6 on RB433AH
Replies: 14
Views: 3988

Re: Problem with ethernet Interface using CAT6 on RB433AH

What I mean is that I did not run up to 100m of cat6 on site. But when I tried in d office, I tried with a longer length of cable, around 250m of cat6 and the radio was powered but the ethernet interface problem persist.

Thank you.
by dipson
Thu Jan 22, 2009 3:44 pm
Forum: Wireless Networking
Topic: Problem with ethernet Interface using CAT6 on RB433AH
Replies: 14
Views: 3988

Re: Problem with ethernet Interface using CAT6 on RB433AH

Hello Angboontiong, "Regarding the Cat5 cable, you have to be careful when running on the POE solution, the cheaper Cat5 cable most is because of the cable for pin 1,2,3&6 is fully copper but other, for pin 4,5,7&8 is mix with some other material. So, this will become the voltage drop and not reliab...
by dipson
Thu Jan 22, 2009 3:36 pm
Forum: Wireless Networking
Topic: Problem with ethernet Interface using CAT6 on RB433AH
Replies: 14
Views: 3988

Re: Problem with ethernet Interface using CAT6 on RB433AH

Hello, Thanks for the response. I did not run up to 100meters. What I have is around 50meters of cat6. the radio is Rb433AH. The termination was done properly ofcourse. I know the cat6 is meant for Gigabyte speed LAN and with Gigabyte switches. That's for Wired Networking. Yhis time around, my Radio...
by dipson
Thu Jan 22, 2009 1:37 pm
Forum: Wireless Networking
Topic: Problem with ethernet Interface using CAT6 on RB433AH
Replies: 14
Views: 3988

Re: Problem with ethernet Interface using CAT6 on RB433AH

Hello,

I am waiting for a good response on this Topic.

Regards
by dipson
Thu Jan 22, 2009 12:58 pm
Forum: Wireless Networking
Topic: Problem with ethernet Interface using CAT6 on RB433AH
Replies: 14
Views: 3988

Problem with ethernet Interface using CAT6 on RB433AH

Compliment of the season to you all out there. I have been following up with the great discourse in this forum and I will say we really have great gurus out there. I am just getting into Wireless and really it's being challenging and really interesting. ISSUE: I have this challenge with my radio (RB...
by dipson
Thu Dec 18, 2008 10:09 am
Forum: Wireless Networking
Topic: Mikrotik APs for Wireless IP cameras: Share your experience
Replies: 4
Views: 1020

Re: Mikrotik APs for Wireless IP cameras: Share your experience

Thanks to you all for the contribution. The problem was that there was no communication between the WLAN interface and the ether interface of the radio. That has been resolved and the system works fine now. I can view the cameras on the server. Thank you once again.

Regards,
Dipson
by dipson
Fri Dec 12, 2008 8:24 pm
Forum: Wireless Networking
Topic: Video Over WDS links. Best way?
Replies: 12
Views: 2247

Re: Video Over WDS links. Best way?

Thank you. right from time, I did not add the Wlan1 to the bridge port. But I use bridge 1 on the IP Address as advised by most of the manuals having brigded all the interfaces. I have changed to ether1 but it seems nothing is working.

Regards,
Dipson
by dipson
Fri Dec 12, 2008 7:18 pm
Forum: Wireless Networking
Topic: Mikrotik APs for Wireless IP cameras: Share your experience
Replies: 4
Views: 1020

Re: Mikrotik APs for Wireless IP cameras: Share your experience

Not at all. On the bridge interface, the WDS are added (as in WDS1....WDSn) as well as the ether1. ether2 and ether3 are not added. On the IP address, bridge interface is added. That's all. Somebody said i should change the latter to ether1. I did and there was no changes. Please somebody should com...
by dipson
Fri Dec 12, 2008 10:11 am
Forum: Wireless Networking
Topic: Video Over WDS links. Best way?
Replies: 12
Views: 2247

Re: Video Over WDS links. Best way?

Thank you. The RB433AH is connected to the switch, so it should be the RB433AH you wanted to say. Meanwhile, I had created a bridge interface and all the ports(wlan,ether,and all the WDS created are added on the bridge interface. On the IP Address, I added bridge interface(not Wlan nor WDS). On the ...
by dipson
Thu Dec 11, 2008 9:21 pm
Forum: Wireless Networking
Topic: Mikrotik APs for Wireless IP cameras: Share your experience
Replies: 4
Views: 1020

Mikrotik APs for Wireless IP cameras: Share your experience

I opted for WDS. I configured RB433AH as the base Station AP and I configured 6 crossroads AP as repeaters. So far I think the WLAN has been extended enough for the range required for the cameras. I have a problem with the system. As I told you earlier, the network for the cameras is Server/Client A...
by dipson
Thu Dec 11, 2008 9:09 pm
Forum: Wireless Networking
Topic: Video Over WDS links. Best way?
Replies: 12
Views: 2247

Re: Video Over WDS links. Best way?

I opted for WDS. I configured RB433AH as the base Station AP and I configured 6 crossroads AP as repeaters. So far I think the WLAN has been extended enough for the range required. I have a problem with the system. As I told you earlier, the network for the cameras is Server/Client Architecture. The...