thx for suggestion, but I am afraid of losing some old boards (the ones running 2.9.51) if I upgrade them to 3.22. Too risky for us and for our customer.
So I would need another solution...
We have created a network like enclosed picture. Red circles are RB433 boards with two wireless cards, ROS 3.22. White circles are RB433 boards with two wireless cards, ROS 2.9.51. Red antennas are dual polarized antennas, 29 dBi. What we call "Routers" in the picture are RB450 boards with...
I want to present my OSPF configuration with load balancing (by using mangle), so as to receive some suggestions, especially if somebody has ideas about introducing multicast and PIM into my configuration. The purpose is to use redundant links to balance unicast (and possibly multicast) traffic comi...
Hi Forepoint thank you very much for the explanation. When all links are physically up (I mean ideal environment), I think that the best route is chosen based on path costs, isn't it? So for example site3 to site1 directly and site2 to site1 directly. What if the bandwidth between site2 and site1 is...
We are willing to use RB433; ethernet switches are there only to connect ethernet interface of RB433, PCs, video encoders, etc. My doubts are: - do i have to mark packets ? - OSPF has to be redistributed over wlan1, wlan2 and ethernet on all RB433 ? - do i need Layer3 switches instead of layer2 swit...
We would like to establish a routed wireless network with OSPF to use aggregation and failover (as explained in http://wiki.mikrotik.com/wiki/OSPF_to_simulate_full_duplex_links_with_redundancy The final network will be the one enclosed (see picture). By summarizing we will have: - 3 sites, each one ...