Community discussions

Search found 469 matches

  • 1
  • 2
by kameelperdza
Fri Sep 22, 2017 10:48 am
Forum: General
Topic: Vlan-trunk interfaces shows same TX when copying files over network
Replies: 0
Views: 307

Vlan-trunk interfaces shows same TX when copying files over network

Good day I have several mikrotiks running vlan at the office. On the one mikrotik i have setup vlan trunking on ether1, eth2, ether4 and ether5. Ether3 is on vlan(IT) Trunk. Today i was copied some large files over the network to a computer on the vlan(IT) interface. I have noticed that ether1, ethe...
by kameelperdza
Tue May 05, 2015 11:47 pm
Forum: General
Topic: mikrotik as dns server problem.
Replies: 0
Views: 400

mikrotik as dns server problem.

Good day. Im a bit confused. I have setup pppoe client on my rb2011 and added the following rules on my mikrotik. /ip firewall mangle add action=mark-routing chain=prerouting new-routing-mark=ADSL1 passthrough=\ no src-address=192.168.4.0/24 add action=mark-routing chain=prerouting new-routing-mark=...
by kameelperdza
Tue Jul 22, 2014 1:03 pm
Forum: General
Topic: download error of torrent routeros-ALL-6.1x "seed deleted"
Replies: 2
Views: 692

Re: download error of torrent routeros-ALL-6.1x "seed delete

Im also getting this on my transmission-torrent.
Just delete the torrent(not the files) and reload the torrent.
by kameelperdza
Tue Jul 22, 2014 12:59 pm
Forum: Beginner Basics
Topic: VPN between 3 networks
Replies: 1
Views: 504

Re: VPN between 3 networks

use MPLS

http://wiki.mikrotik.com/wiki/Transpare ... using_MPLS

On first network create DHCP server
by kameelperdza
Tue Jul 22, 2014 12:51 pm
Forum: General
Topic: Problems Accessing computer behind other routers
Replies: 16
Views: 1980

Re: Problems Accessing computer behind other routers

Great glad you solved it. :)
by kameelperdza
Tue Jul 22, 2014 11:12 am
Forum: General
Topic: Problems Accessing computer behind other routers
Replies: 16
Views: 1980

Re: Problems Accessing computer behind other routers

If you can ping and tracert both ways then routing might not be the caused.

What is the ip address that dns server recieves for the dns request?

How is your network setup?
router1(vlan)(172.17.0.8) - - - - - router2(vlan)(172.17.0.3)(dhcp[172.17.8.1/24])
And what dns/gateway does computer use?
by kameelperdza
Tue Jul 22, 2014 9:45 am
Forum: General
Topic: Problems Accessing computer behind other routers
Replies: 16
Views: 1980

Re: Problems Accessing computer behind other routers

Check the routing table on the 172.17.0.8 router.

I recommend switching over to ospf.
What is nice about ospf is that it automatically creates/removes routes when your network change.
by kameelperdza
Mon Jul 21, 2014 8:22 pm
Forum: General
Topic: Problems Accessing computer behind other routers
Replies: 16
Views: 1980

Re: Problems Accessing computer behind other routers

My routers are almost setup the same way as yours. Some that you can try.... 1. On the router that vlan connect check under ip firewll connections to see if your computer ip tries to contact to the dns. 2.setup dns on one of the backbone routers and add the dns server ip address to the dns list. Cha...
by kameelperdza
Mon Jul 21, 2014 5:49 pm
Forum: General
Topic: Problems Accessing computer behind other routers
Replies: 16
Views: 1980

Re: Problems Accessing computer behind other routers

Are you able to ping your computer from the ip you try to browse?
you say that your laptop has lan ip 172.17.8.1/24?
And your backbone has ip range 172.17.0.0/24?

Why does the computer have different ip range if you are using vlans to create one big network?
by kameelperdza
Mon Jul 21, 2014 5:15 pm
Forum: Beginner Basics
Topic: Oops, set interface 0 to disable
Replies: 6
Views: 1363

Re: Oops, set interface 0 to disable

You can try to connect the cable to any other available ports.(that it if the router has more than one) or you can connect with one of the devices that usually connects to your wireless. But you will need to configure static ip address, then try winbox again. or if you can remember the wlan address ...
by kameelperdza
Mon Jul 21, 2014 5:07 pm
Forum: General
Topic: Problems Accessing computer behind other routers
Replies: 16
Views: 1980

Re: Problems Accessing computer behind other routers

i wil say on the router that you running dns on.
What masquerade does it help you communicate with computers behind your router.
by kameelperdza
Mon Jul 21, 2014 5:04 pm
Forum: Beginner Basics
Topic: Microtik 750 OS 6 - PPTP Client
Replies: 4
Views: 1245

Re: Microtik 750 OS 6 - PPTP Client

Here is a nice how to.
You just need to copy the code to notepad and edit with your settings.
Then open winbox, left click on new teminal window and right click and paste
http://wiki.mikrotik.com/wiki/Manual:Interface/PPTP
by kameelperdza
Mon Jul 21, 2014 4:57 pm
Forum: General
Topic: Problems Accessing computer behind other routers
Replies: 16
Views: 1980

Re: Problems Accessing computer behind other routers

Did you add masquerade?

/ip firewall nat add chain=srcnat action=masquerade
by kameelperdza
Mon Jul 21, 2014 3:27 pm
Forum: General
Topic: Packet mark routing
Replies: 6
Views: 4629

Re: Packet mark routing

If you remote router see your pings.

On remote router.

add this.

/ip route add dst-address=(your pc address or range) gateway=(the address of the rb532)

for example = /ip route add dst-address=192.168.0.2 gateway=10.0.0.1

This rule will tell the remote router where to send the reply back.
by kameelperdza
Mon Jul 21, 2014 3:22 pm
Forum: General
Topic: Packet mark routing
Replies: 6
Views: 4629

Re: Packet mark routing

Hi check this.
Example

/ip route add dst-address=0.0.0.0/0 gateway=(cable modem) routing-mark=cable

/ip firewall mangle add src-address=(your pc) routing-mark=cable protocol=icmp
by kameelperdza
Fri Jul 18, 2014 1:35 pm
Forum: General
Topic: VPN Problems
Replies: 18
Views: 4035

Re: VPN Problems

Im don't know much about Linux, but maybe you can try to bridge pptp-internface with Ethernet-interface on the server?
by kameelperdza
Fri Jul 18, 2014 1:22 pm
Forum: General
Topic: VPN Problems
Replies: 18
Views: 4035

Re: VPN Problems

Check your default gateway and dns on server and client.
by kameelperdza
Fri Jul 18, 2014 1:15 pm
Forum: General
Topic: Ethernet interface Up\Down
Replies: 10
Views: 10932

Re: Ethernet interface Up\Down

you can also try to downgrade/upgrade firmware.

/system routerboard upgrade


btw I also thought my problem was solved. But ether1 still does it at random times.
by kameelperdza
Fri Jul 18, 2014 11:34 am
Forum: General
Topic: Ethernet interface Up\Down
Replies: 10
Views: 10932

Re: Ethernet interface Up\Down

Hi there.

Had the same problem.

You should test cable with cable tester.
One of the wires might be broken.
OR you can replace the cable with new one instead.
Should fix the issue

--EDIT--

Might also be interference?
by kameelperdza
Fri Jul 18, 2014 11:31 am
Forum: General
Topic: VPN Problems
Replies: 18
Views: 4035

Re: VPN Problems

try doing a traceroute form the mikrotik, server and also client.

That might show you where the packets stop.
by kameelperdza
Fri Jul 18, 2014 9:44 am
Forum: General
Topic: VPN Problems
Replies: 18
Views: 4035

Re: VPN Problems

Also add this if you there is no such rule already.

/ip firewall nat add chain=srcnat action=masquerade src-address=10.201.0.0/24

It should allow you to communicate with iprange 10.1.1.0/24
by kameelperdza
Fri Jul 18, 2014 9:21 am
Forum: General
Topic: VPN Problems
Replies: 18
Views: 4035

Re: VPN Problems

If I read this correctly you say that you cannot ping or communicate with the mikrotik?

I see in your firewall rules that you drop "in-interface=ether1" and "in-interface=konata-pptp".

Have you tried disable those rules?
by kameelperdza
Fri Jul 18, 2014 9:09 am
Forum: General
Topic: PPTP problem with tunnel
Replies: 4
Views: 1060

Re: PPTP problem with tunnel

Try adding pptp logging. Then you might see what happens on both mikrotiks when the disconnection happens.

Why do you have firewall between routers?

how is the setup? internet---mikrotik---firewall---mikrotik?

What firewall are you using?
by kameelperdza
Thu Jul 17, 2014 4:21 pm
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 304960

Re: Tool: Realtime per IP traffic monitor for home/office

Thank you.
Nice Tool
by kameelperdza
Thu Jul 17, 2014 3:42 pm
Forum: General
Topic: Downgrade 6.13 to 5.26 failure
Replies: 2
Views: 859

Re: Downgrade 6.13 to 5.26 failure

Hi there.
Look here.
http://wiki.mikrotik.com/wiki/Manual:Netinstall

I had the same issue awhile ago and this it the best way to solve it.
by kameelperdza
Thu Jul 17, 2014 3:28 pm
Forum: General
Topic: PPTP problem with tunnel
Replies: 4
Views: 1060

Re: PPTP problem with tunnel

First check this. 1. Can the routers ping each other? 2. Do you have firewall rules that block pptp port 1723tcp 3. you can get for logging info by adding pptp log rule. To do this go to system --> logging and click on the +. The click on topic and scroll down until you get pptp. Click ok and now it...
by kameelperdza
Fri Jun 27, 2014 2:46 pm
Forum: General
Topic: Speed problems on EOIP tunnel
Replies: 3
Views: 2536

Re: Speed problems on EOIP tunnel

Thanx mxena

I was unable to find solution for slow traffic over eoip.
After moving to mpls speed changed from 200kb/s to 3.6mb/s
by kameelperdza
Tue Apr 08, 2014 4:35 pm
Forum: General
Topic: input buffer overflow
Replies: 2
Views: 1632

Re: input buffer overflow

It is routerboard RB2011UiAS and routeros 6.11
Did not contact support yet.
70% chance that i will restore squidserver.
Thank you
by kameelperdza
Tue Apr 08, 2014 3:21 pm
Forum: General
Topic: input buffer overflow
Replies: 2
Views: 1632

input buffer overflow

Good Day. I downloaded urlfilter file from non-working squid server and modified it so that it can just be copied and pasted inside mikrotik terminal. It is a very big file (about 84000 urls) and the contents will be added to /ip proxy access I don’t know how much entires "/ip proxy access" can take...
by kameelperdza
Sat Mar 29, 2014 6:28 pm
Forum: General
Topic: "Encryption got out of sync"
Replies: 10
Views: 7986

Re: "Encryption got out of sync"

Any light on this issue? Have them same problem using Ros6.11
by kameelperdza
Thu Mar 06, 2014 10:26 am
Forum: General
Topic: MikroTik Training events and institutions around the world
Replies: 2
Views: 617

Re: MikroTik Training events and institutions around the wor

Oh thanks

They said they are still considering it
by kameelperdza
Wed Mar 05, 2014 9:57 am
Forum: General
Topic: MikroTik Training events and institutions around the world
Replies: 2
Views: 617

MikroTik Training events and institutions around the world

How often does Mikrotik update the schedule list? Are the current schedules for the whole year or are there more courses added throughout the year?

The reason for asking is that I would like to do the MTCWE course but it is not available in my area yet.
by kameelperdza
Tue Dec 03, 2013 4:43 pm
Forum: General
Topic: Unable to throttle p2p with layer7 and queue tree.
Replies: 0
Views: 604

Unable to throttle p2p with layer7 and queue tree.

Hi folks. A friend of mine has asked me to help him limiting p2p traffic to 30kb~40kb. On my test router I copied the rules from this wiki page http://wiki.mikrotik.com/wiki/Basic_traffic_shaping_based_on_layer-7_protocols After I have done this I noticed that mangle rules did not pass on the result...
by kameelperdza
Mon May 13, 2013 5:11 pm
Forum: Beginner Basics
Topic: RB 750 Activity LED not showing activity
Replies: 7
Views: 8360

Re: RB 750 Activity LED not showing activity

I was worried my rb750up might be broken. I had to replace my rb750g so that i can have usb support.
by kameelperdza
Fri Mar 29, 2013 4:49 pm
Forum: General
Topic: rb750g acting strange.
Replies: 2
Views: 384

Re: rb750g acting strange.

yes i did.
i always do that first after routeros upgrade/downgrade.
by kameelperdza
Fri Mar 29, 2013 9:17 am
Forum: General
Topic: rb750g acting strange.
Replies: 2
Views: 384

rb750g acting strange.

Hi there. After upgrading from ros 4.10 to 5.24 i have notice this. Everytime the router is rebooted then i am unable to login using ip address but i can login via macwinbox. Also no pptp connections are connected. But when i ping another router on the same subnet from within winbox(after login with...
by kameelperdza
Thu Feb 28, 2013 12:25 pm
Forum: General
Topic: Microsoft Direct Play
Replies: 3
Views: 1200

Re: Microsoft Direct Play

i have tested it with upnp enabled and dxdiag directplay test. I am able to join session. Trying to play hardwar UIM6.0. The game does show up in list but nothing happens wehn i join. Later i will get error saying Timeout-Server failed to respond. Might still be missing something. Thank you for resp...
by kameelperdza
Thu Feb 28, 2013 11:27 am
Forum: General
Topic: Microsoft Direct Play
Replies: 3
Views: 1200

Re: Microsoft Direct Play

Hi there did you manage to get the game working? I have similar game that also uses directplay.
by kameelperdza
Mon Feb 25, 2013 2:19 pm
Forum: RouterBOARD hardware
Topic: OSPF Issues
Replies: 4
Views: 3489

Re: OSPF Issues

Had the same problem after upgrading routers from 4.10 to 5.24.

Thank you tyronzn for the temporary fix.
by kameelperdza
Wed Oct 03, 2012 5:25 pm
Forum: General
Topic: cannot connect to Mikrotik rb433L after routeros upgrade
Replies: 2
Views: 609

Re: cannot connect to Mikrotik rb433L after routeros upgrade

Should the ethetner leds be on/blinking when in pxe mode? When i power on the router then all leds go on and then back off and then i hear beep and nothing else happens. I tried pxe mode amd the led does blink for 10 seconds but then go off again and then nothing happens. I wil find out from the sup...
by kameelperdza
Wed Oct 03, 2012 10:17 am
Forum: General
Topic: cannot connect to Mikrotik rb433L after routeros upgrade
Replies: 2
Views: 609

cannot connect to Mikrotik rb433L after routeros upgrade

Hi there. Yesterday i put the rb433L in the plastic encloser and also connected two mini pci cards to it. I noticed that the wlan cards was not picking up in winbox to I download the lastest ROS and rebooted the router. But after doing so I was unable to connect to it anyway possible. Even tried doi...
by kameelperdza
Thu Sep 13, 2012 5:16 pm
Forum: Wireless Networking
Topic: MT router under attack?
Replies: 12
Views: 23842

Re: MT router under attack?

If you want to log every subsequent login attempt from a blacklisted address, put this above the "action=drop" rule: /ip firewall filter add chain=input protocol=tcp dst-port=22 src-address-list=ssh_blacklist action=log log-prefix=SSH-blacklisted comment="log blacklisted ssh brute forcers" disabled...
by kameelperdza
Thu Sep 13, 2012 11:38 am
Forum: General
Topic: logging rule does not recreate file on disk after deletion.
Replies: 0
Views: 317

logging rule does not recreate file on disk after deletion.

Hi there. i have changed critical rule(under logging) from echo to disk. I see that it has created file called log.0.txt When i delete the file then it does not create a new file. The reason for changing th rule from echo to disk is to save all failed login attemps such as brute force to file for fu...
by kameelperdza
Thu Sep 13, 2012 11:13 am
Forum: Wireless Networking
Topic: MT router under attack?
Replies: 12
Views: 23842

Re: MT router under attack?

What i have done is to change critical under logging from echo to disk.
It helps me to keep track on how many times one ip address tries.
by kameelperdza
Thu Aug 02, 2012 1:42 pm
Forum: General
Topic: Winbox Connection refused!
Replies: 9
Views: 20811

Re: Winbox Connection refused!

I get this alot when L7 makes cpu load run high on rb750g. Reboot helps.

Is this fixed in future ros version?
My current ros is 5.14
by kameelperdza
Fri Jul 27, 2012 1:20 pm
Forum: General
Topic: Bandwith limiting big files...
Replies: 21
Views: 9742

Re: Bandwith limiting big files...

Hi people i want to throttle all the ip addresses on the 192.168.0.0/24 range. I have the option to create rule for each ip address or only make one rule with 192.168.0.0/24 as target address. If i create rule for each ip address then i can adjust speed per ip address if needed. But to do this i wil...
by kameelperdza
Sat Jul 14, 2012 12:32 am
Forum: RouterBOARD hardware
Topic: 4 port ethernet PCI card...
Replies: 6
Views: 2896

Re: 4 port ethernet PCI card...

HI have you find an dealer yet?
by kameelperdza
Fri Jul 13, 2012 11:31 pm
Forum: General
Topic: rb750g kernel failure and high cpu load. layer7
Replies: 2
Views: 658

Re: rb750g kernel failure and high cpu load. layer7

Hello Dobby. The router is working without any problems during the day. Only at evenings the problem will appear. It is usually when people do p2p. There are two computers doing p2p. The one is on ether 4(adsl2) and the other on erher5 (adsl3) CPU usage only goes up to +-100% if both computers are d...
by kameelperdza
Tue Jun 19, 2012 5:38 pm
Forum: General
Topic: rb750g kernel failure and high cpu load. layer7
Replies: 2
Views: 658

rb750g kernel failure and high cpu load. layer7

Hi there. I have a mikrotik rb750g which im using to split traffic between 3 adsl line. I have also setup layer 7 and im running it on ether3, ether 4 and ether5 which is the Ethernet ports that the adsl routers are connected. The cpu load is about +-50%. Sometimes when I enable some of the rules in...
by kameelperdza
Thu Jun 14, 2012 3:08 pm
Forum: General
Topic: Basic Traffic shapping based on Layer 7 protocols
Replies: 5
Views: 1164

Re: Basic Traffic shapping based on Layer 7 protocols

Solution = Disable the "Everything else that remains" mangle rules.
by kameelperdza
Thu Jun 14, 2012 1:39 pm
Forum: General
Topic: Basic Traffic shapping based on Layer 7 protocols
Replies: 5
Views: 1164

Re: Basic Traffic shapping based on Layer 7 protocols

Hi there!

I know that this post is almost 3 years old, but did you found the problem?

And if so what was the solution?
by kameelperdza
Wed Oct 19, 2011 2:14 pm
Forum: General
Topic: l2tp rx errors. what can i do?
Replies: 1
Views: 677

l2tp rx errors. what can i do?

HI there. I have one rb750g running as the l2tp server. Also three rb433 routerboards setup as l2tp clients. They all are using ros4.10 The problem that im having is that i get rx errors when there is traffic flowing. I have checked the wireless registration tables and there is no disconnections. Th...
by kameelperdza
Fri Oct 07, 2011 9:03 am
Forum: Wireless Networking
Topic: Run 2 networks with ospf on one link. Can it be done?
Replies: 2
Views: 524

Re: Run 2 networks with ospf on one link. Can it be done?

Hi there thank you for the response. Due to security reasons i will not try this.
by kameelperdza
Thu Oct 06, 2011 10:17 am
Forum: Wireless Networking
Topic: Run 2 networks with ospf on one link. Can it be done?
Replies: 2
Views: 524

Run 2 networks with ospf on one link. Can it be done?

Hi there i am not sure if is hould post it here of in forwarding protocols. But anyhow here it is. Here i something i would like to try but first i want to find out if it will work. Currently i have working wifi network running ospf, the ip range is 172.23.128.0/24 Now here is what i want to do... 1...
by kameelperdza
Thu Sep 22, 2011 10:05 am
Forum: The User Manager
Topic: No userdata after downgrading from 4.6 to 4.10
Replies: 4
Views: 1029

Re: No userdata after downgrading from 4.6 to 4.10

Hi there seems that the problem was that the cost of ospf interfaces was equal. I changed the cost on link B to 20 and Link A to 10.
So far so good.
by kameelperdza
Thu Sep 22, 2011 10:01 am
Forum: Forwarding Protocols
Topic: Help with Path Cost on OSPF
Replies: 6
Views: 1595

Re: Help with Path Cost on OSPF

Thank you this solved my issue i had. L2tp was reconnecting constantly and after ajusting cost the connection was stable. My network layout is as this.....

AP1 --> AP2 -->AP3 -->AP1

So that when link A is down then link B can take over.

Cheers
by kameelperdza
Tue Sep 20, 2011 4:09 pm
Forum: The User Manager
Topic: No userdata after downgrading from 4.6 to 4.10
Replies: 4
Views: 1029

Re: No userdata after downgrading from 4.6 to 4.10

The plan did not work and l2tp stil reconnects every x minutes.so i am going to go back to ros 5.6. I did tried to finetune ospf and i am using ptmp. The connection have been stable for 2 hours now. I will check every hour.
by kameelperdza
Tue Sep 20, 2011 11:50 am
Forum: The User Manager
Topic: No userdata after downgrading from 4.6 to 4.10
Replies: 4
Views: 1029

Re: No userdata after downgrading from 4.6 to 4.10

Hello Normis. On one of my rb433’s I had an l2tp connection that unexpectedly reconnected every 30 minutes. This did not happen after downgrading back to 4.10. The connection has been up for 12 hours now. I did remove the old userman backup and reconfigured it this morning. Everything it back up and...
by kameelperdza
Mon Sep 19, 2011 8:52 pm
Forum: The User Manager
Topic: No userdata after downgrading from 4.6 to 4.10
Replies: 4
Views: 1029

No userdata after downgrading from 4.6 to 4.10

Hi there today i have downgraded rb750g from routeros 5.6 to routeros 4.10. when i log into router using userman i see that under users there is no data.. Does this mean that all my info is gone and that i will need to set it up again or can i retrieve it somehow.

Thanx
by kameelperdza
Fri Sep 16, 2011 1:14 pm
Forum: General
Topic: l2tp reconnects every few minutes.
Replies: 5
Views: 6134

l2tp reconnects every few minutes.

Hi I have eoip over l2tp connection. The routers has been running for 15 days without any problems. But today i have checked and the l2tp connection reconnects all the time. The wireless connection does not have connection problems and does not reconnect. Router A (l2tp server) -RB750G -Routeros 5.6...
by kameelperdza
Thu Sep 15, 2011 9:58 am
Forum: Wireless Networking
Topic: Can bad ccq cause lagging and high pings?
Replies: 6
Views: 1416

Re: Can bad ccq cause lagging and high pings?

I have setup a backbone link so when the first link might be down due to power outage or bad weather then the second link wil be used.
Cheers
by kameelperdza
Tue Aug 23, 2011 8:00 pm
Forum: Wireless Networking
Topic: Can bad ccq cause lagging and high pings?
Replies: 6
Views: 1416

Re: Can bad ccq cause lagging and high pings?

Hi there after some strong wind and lots of rain i had to change the freq on ap1 to ap2 to 5660 5ghz 20mhz. The dbi is about 31 to 42 now. But the link between ap2 and ap3 is stil +-10dbi. The two grids on ap2 is about +-600mm apart. On sunny days the signal is to strong(rx streing is about -46) and...
by kameelperdza
Tue Aug 23, 2011 10:30 am
Forum: Wireless Networking
Topic: Can bad ccq cause lagging and high pings?
Replies: 6
Views: 1416

Re: Can bad ccq cause lagging and high pings?

It is rainy weather here today so the statistics may differ from when it is sunny or windy. So far i did not had any disconnects or any timeouts. I am also using qos rules and qeues. I know that 2km is too close for using 27dbi grids and 25 db cards, there is also a few tress in the way that may be ...
by kameelperdza
Mon Aug 22, 2011 6:00 pm
Forum: Wireless Networking
Topic: Can bad ccq cause lagging and high pings?
Replies: 6
Views: 1416

Can bad ccq cause lagging and high pings?

Hi there everybody. I have a connection between 2 buildings, in building 2 there is 2 ip phones that connects to building one via port 6000udp. Building 2 is on a higher ground than building 1. I did managed to get ccq to 99/99 by setting data rates to 6/9/18. When there is a slight breeze then the ...
by kameelperdza
Mon Aug 22, 2011 5:27 pm
Forum: Wireless Networking
Topic: signal is good but ccq drop
Replies: 5
Views: 2290

Re: signal is good but ccq drop

My ccq drops when there is a slight breeze. i think it has something to do with the trees. You can try to decrease data rates.
by kameelperdza
Thu Aug 11, 2011 10:50 pm
Forum: Beginner Basics
Topic: Working QoS configuration
Replies: 44
Views: 71593

Re: Working QoS configuration

I have noticed that if i make bridge1 the parent in queue tree then the queues does not work. Devices on bridge1 is ether1 ,ether3, eoip-tunnel1 ,eoip-tunnel2 ,eoip-tunnel3 (Bridge1 ip address=192.168.0.0/24) Devices on bridge2 is ether2 and ether4 (Bridge2 ip address=172.16.0.0/24) I did some test ...
by kameelperdza
Fri Aug 05, 2011 12:06 pm
Forum: Wireless Networking
Topic: Voip quality is low, but ccq is between 89 and 100
Replies: 4
Views: 919

Re: Voip quality is low, but ccq is between 89 and 100

http://forum.mikrotik.com/viewtopic.php?f=9&t=33313

My pbx uses port 6000 udp so i edited the mangle rules and made port 6000 connections priority1(time critical). So far it is working gr8.
by kameelperdza
Fri Aug 05, 2011 9:08 am
Forum: Wireless Networking
Topic: Voip quality is low, but ccq is between 89 and 100
Replies: 4
Views: 919

Re: Voip quality is low, but ccq is between 89 and 100

Hi sonny i have added QOS using mangle and queues to all my rb's The voip is much better.
by kameelperdza
Fri Aug 05, 2011 9:04 am
Forum: Beginner Basics
Topic: Working QoS configuration
Replies: 44
Views: 71593

Re: Working QoS configuration

so non_critical_queue value should be more or less the value of default queue?
by kameelperdza
Tue Aug 02, 2011 3:38 pm
Forum: Beginner Basics
Topic: Working QoS configuration
Replies: 44
Views: 71593

Re: Working QoS configuration

First of all, it's nice to see that it's working for other people too! It's been some time since I wrote this but the configuration has remained the same since then, so here it is: /ip firewall mangle add action=mark-packet chain=postrouting comment="Link-critical traffic (DHCP)" disabled=no dst-po...
by kameelperdza
Sun May 08, 2011 7:36 pm
Forum: Wireless Networking
Topic: signal to noise
Replies: 9
Views: 16761

Re: signal to noise

Hi there is 42db signal to noise to loud? I managed to reduce tx power on some link to make signal to noise between 19 and 30.

What is the highest that signal noise can be before it is considered as shouting.

cheers
by kameelperdza
Tue Jan 18, 2011 2:22 pm
Forum: Wireless Networking
Topic: question about 40mhz channel width
Replies: 2
Views: 1188

question about 40mhz channel width

Hi people i have updates my routeros from 4.10 to 4.16 and now i see that there is an option to use channel witdth 40mhz.
Is this 40mhz channel width sam as turbo mode?

I have a point to point link an i am using r5h cards and one r52h.

Thanx
by kameelperdza
Sat Jan 15, 2011 10:47 am
Forum: Wireless Networking
Topic: Voip quality is low, but ccq is between 89 and 100
Replies: 4
Views: 919

Voip quality is low, but ccq is between 89 and 100

Hi there people o have a 5ghz link which is about 2km long. Site A has a 27dbi 5 GHz grid, r5h mini pci card and an rb433. Site B has a 24dbi 5 GHz grid, r52h mini pci card and an rb433. Site A is located near a river, so it is much lower than site B My problem is that the people from site A say tha...
by kameelperdza
Mon Jan 10, 2011 10:23 pm
Forum: Scripting
Topic: wireless mikrotik and voip
Replies: 6
Views: 2558

Re: wireless mikrotik and voip

Hallo what is a good ccq? My ccq is mostly 97%/100% when there is no traffic on it. But then i do a bandwidth test then the ccq will jump between 74 and 100%. I have reduced the data rates from 36mbit to 12mbit. The signal also jumps between -68 and -84. And the signal to noise between 21db and 36db...
by kameelperdza
Fri Dec 10, 2010 4:35 pm
Forum: General
Topic: Block winbox/neigbour scan from computers not in admin list.
Replies: 3
Views: 3257

Re: Block winbox/neigbour scan from computers not in admin l

Thank you for all the replies. Is there a way to block mac telnet, but still allow it in the admin group. I see that port 20561 udp is added to admin port list.

I know that i can disable mac telnet by going to /tool/mac-telnet and then disable all interfaces in list.
by kameelperdza
Thu Dec 09, 2010 2:03 pm
Forum: General
Topic: Hot to use port 222 for ssh access?
Replies: 5
Views: 4187

Re: Hot to use port 222 for ssh access?

thank you
by kameelperdza
Thu Dec 09, 2010 12:44 pm
Forum: General
Topic: Hot to use port 222 for ssh access?
Replies: 5
Views: 4187

Hot to use port 222 for ssh access?

Hi there i am trying to forward all ssh requests on port 222 to go to port 22. But im having some trouble. Here is the rule that i have added. The reason why i want to do this is so that i can log into router if i have locked myself out. I stil want to allow port 22 for admin users. ip firewall filt...
by kameelperdza
Wed Nov 17, 2010 11:26 am
Forum: General
Topic: Block winbox/neigbour scan from computers not in admin list.
Replies: 3
Views: 3257

Block winbox/neigbour scan from computers not in admin list.

Hi there i have successfully setup mikrotik firewall filter rules. I also have been able to block winbox scan by following this link http://www.mikrotik.unimedcenter.org/uncategorized/block-scan-winbox-and-neighbour-mikrotik/ This is the 3 rules that i have used. add action=drop chain=forward commen...
by kameelperdza
Wed Oct 20, 2010 3:59 pm
Forum: General
Topic: port forward iprange 172.16.8.0/24 for gaming
Replies: 2
Views: 623

Re: port forward iprange 172.16.8.0/24 for gaming

Thank you.

It is working great now.
by kameelperdza
Wed Oct 20, 2010 1:52 pm
Forum: General
Topic: port forward iprange 172.16.8.0/24 for gaming
Replies: 2
Views: 623

port forward iprange 172.16.8.0/24 for gaming

Hello People. Im having some difficulties forwarding soem port for gaming. The game server in on ip range 172.16.0.0/24 and my pc in on 172.16.8.0/24. The ip of game server is 172.16.0.101 and my computer ip is 172.16.8.100 I am able to connect to gameserver when i use this natting.. /ip firewall na...
by kameelperdza
Wed Oct 06, 2010 7:56 pm
Forum: General
Topic: OSPF - init bit set in middle of an exchange
Replies: 3
Views: 5790

Re: OSPF - init bit set in middle of an exchange

If you decide to use ptmp then you should also check that only one router has priority set to 1. I had the same problem as you, but was solved after priority was set to 0 on the other router
by kameelperdza
Sun Sep 26, 2010 3:58 pm
Forum: General
Topic: Redirect all non specified url requests to one ip address.
Replies: 2
Views: 508

Redirect all non specified url requests to one ip address.

Hi there I am running mikrotik dns relay on one of my rb750g routers. I have added a few urls that redirect people to internal servers. I would like to know can i redirect all url request that has not been added to the dns list to one ip address? For example when people try to go to www.google.com t...
by kameelperdza
Thu Aug 12, 2010 12:28 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 136682

Re: Sample Installations - Sticky Please

Kameeltjie...

Have you tried LMR600?
No sorry scoop only have lmr 195 and lmr 400. Lmr400 is much better option than lmr 195
by kameelperdza
Thu Aug 12, 2010 11:28 am
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 136682

Re: Sample Installations - Sticky Please

LMR400- cable
loss 2.4Ghz 0.50db/meter
loss 5.8Ghz 0.73db/meter

Im using 4 meter cable without any problems.
by kameelperdza
Tue Aug 03, 2010 2:16 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 136682

Re: Sample Installations - Sticky Please

My Instalation from work to my house
by kameelperdza
Sun Aug 01, 2010 10:15 pm
Forum: General
Topic: Please help me find the solution. Rb411 ether1 shows no link
Replies: 1
Views: 412

Please help me find the solution. Rb411 ether1 shows no link

Hallo people I am trying to diagnose a problem that I have with a rb411. The problem is that sometimes, usually after a week then the Ethernet port 1 of the rb411 will show that there is no link. But the poe still gives the rb411 power. And then sometimes after about 5 hours then the rb411 will show...
by kameelperdza
Tue Jul 27, 2010 9:55 am
Forum: Wireless Networking
Topic: Can nstream cause heating problems?
Replies: 0
Views: 326

Can nstream cause heating problems?

Hi there. I want to enable nstream with exact size frame policy. But what I would like to know if the card will work harder and can this cause over heating problems in the future or will this decrease the lifespan of my r5h cards? About a few months ago I used the 5ghz-turbo band and after a few wee...
by kameelperdza
Mon Jul 19, 2010 7:29 pm
Forum: General
Topic: ethernet 1 shows disconnected after working for few days.
Replies: 1
Views: 396

Re: ethernet 1 shows disconnected after working for few days

The router's ethernet 1 connected after 5 hours, now i will test it with the auto negotiation unticked.

I have read it in http://forum.mikrotik.com/viewtopic.php?f=3&t=25068

realy hope this will work
by kameelperdza
Mon Jul 19, 2010 5:07 pm
Forum: General
Topic: Router booting up but not appearing in winbox
Replies: 2
Views: 458

Re: Router booting up but not appearing in winbox

Use a udp cable tester and check if the cable is correct. You can also try to remove the routerboard and connect it without the poe to your computer using a 18volt adaptor.
by kameelperdza
Mon Jul 19, 2010 3:14 pm
Forum: General
Topic: ethernet 1 shows disconnected after working for few days.
Replies: 1
Views: 396

ethernet 1 shows disconnected after working for few days.

Hi there i have a rb411 that is connected to a 8port switch. After working great for weeks it began to give me this problem. Sometimes it will show that the ethernet port 1 is not connected, and then after waiting for hours then it will go back showing the 'R'. I tried to change the switch, also rep...
by kameelperdza
Fri Jun 18, 2010 5:40 pm
Forum: General
Topic: Why does masquerade send routers ip address to source
Replies: 11
Views: 3209

Re: Why does masquerade send routers ip address to source

Thank you. So all i need to do is to setup a dns server on the 172.16.1.0/24 side.

thank you
by kameelperdza
Fri Jun 18, 2010 5:21 pm
Forum: General
Topic: Why does masquerade send routers ip address to source
Replies: 11
Views: 3209

Re: Why does masquerade send routers ip address to source

So that means that all request from 172.16.3.0/24 will be forwarded to 172.16.1.5 ?

or

when i putty to 172.16.1.5 then i will connect to server with the ip address of the computer that i am using?
by kameelperdza
Fri Jun 18, 2010 4:54 pm
Forum: General
Topic: Why does masquerade send routers ip address to source
Replies: 11
Views: 3209

Re: Why does masquerade send routers ip address to source

Hi Chupaka! :D Ok here is what i currently have. [admin@MikroTik] /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=masquerade src-address=172.23.128.0/24 1 chain=dstnat action=dst-nat to-addresses=172.16.1.0-172.16.1.255 src-address=172.16.3.0/28 [admin@Mik...
by kameelperdza
Fri Jun 18, 2010 4:03 pm
Forum: General
Topic: Why does masquerade send routers ip address to source
Replies: 11
Views: 3209

Re: Why does masquerade send routers ip address to source

Hi i did some test. And i am unable to fix this.

What i would like to know is..

1. under action --> dst-nat must the ip address be the address of a dns server? I tried to put the targer server address there but that does not work.
by kameelperdza
Thu Jun 10, 2010 3:10 pm
Forum: General
Topic: Why does masquerade send routers ip address to source
Replies: 11
Views: 3209

Re: Why does masquerade send routers ip address to source

I suppose you need to use DST-NAT. Add rule to /ip firewall nat Set src-address, action=dsnat and to-addresses (local IP address, where traffic should be redirected to). Thank you. I tried this. ip firewall nat add chain=dstnat src-address=172.16.3.0/24 action=dst-nat to-addresses=172.16.1.0/24 But ...
by kameelperdza
Thu Jun 10, 2010 9:49 am
Forum: General
Topic: Why does masquerade send routers ip address to source
Replies: 11
Views: 3209

Why does masquerade send routers ip address to source

Hi there at the moment i am using a rb750g to relay dns requests from 172.16.3.0/24 and 172.16.4.0/24. One of the statis relays is set to a samba server, the ip is 172.16.1.5. I also had to add masquerade to the rb750g and i am able to conenct and ping the samba router. But i have set the samba fire...
by kameelperdza
Tue May 11, 2010 10:20 pm
Forum: General
Topic: Trying to setup upnp over 3 mikrotiks
Replies: 2
Views: 629

Re: Trying to setup upnp over 3 mikrotiks

What i did was to create a eoip over l2tp connection and now i am able to use the upnp on the remote server
by kameelperdza
Sat May 08, 2010 7:49 pm
Forum: General
Topic: how block connection of p2p?
Replies: 291
Views: 153583

Re: how block connection of p2p?

Hi TKITFrank can you maybe post your complete config thati can use on my mikrotik to block p2p please. thank you
by kameelperdza
Fri May 07, 2010 11:46 am
Forum: General
Topic: Trying to setup upnp over 3 mikrotiks
Replies: 2
Views: 629

Trying to setup upnp over 3 mikrotiks

Hi there I have bought myself a mediaplayer that can connect to upnp and watch youtube etc. The server that runs the upnp software is at the office. Now i will need to configure 3 of the mikrotik routers to allow upnp. Here is the layout of the network. Server(172.16.1.1)----------Mikrotik1(rb750) e...
by kameelperdza
Thu Apr 29, 2010 9:21 am
Forum: The Dude
Topic: how to access dude-3.5-mipsbe.npk on rb433?
Replies: 2
Views: 1105

Re: how to access dude-3.5-mipsbe.npk on rb433?

I tried that and it is not working, so i removed it
by kameelperdza
Thu Apr 22, 2010 9:11 am
Forum: Forwarding Protocols
Topic: Ospf does not work after reboot.
Replies: 6
Views: 1479

Re: Ospf does not work after reboot.

hmmm, i have set router 1 ip addresses as priority 1 in /nmba niegbours Both wlan1 and wlan2 is set to priority 1 on all routers. I have set 172.23.128.1 and 172.23.128.5 as priority 1. I must admit after setting interfaces to ptmp the routes are created instantly after router reboots. But do i stil...
by kameelperdza
Wed Apr 21, 2010 11:15 am
Forum: Forwarding Protocols
Topic: Ospf does not work after reboot.
Replies: 6
Views: 1479

Re: Ospf does not work after reboot.

On one of my router when i set interface to nmba then i get this error in the logs.

Designated router elections failed: no routers in network with priority > 0

What is the difference between nmba and ptmp.

Maybe i should use ptmp.
by kameelperdza
Wed Apr 21, 2010 9:53 am
Forum: Forwarding Protocols
Topic: Ospf does not work after reboot.
Replies: 6
Views: 1479

Re: Ospf does not work after reboot.

I have changed my poll times on all routers to 10 seconds,and when i reboot the router it takes about 2 minutes and 17 seconds until ospf routes are creates. Here is my two logs(ospf) that was created after i rebooted until routes have been created.
by kameelperdza
Tue Apr 20, 2010 7:50 pm
Forum: Forwarding Protocols
Topic: Ospf does not work after reboot.
Replies: 6
Views: 1479

Ospf does not work after reboot.

I have setup ospf and it seems to work, but when i reboot router then it does not create the routes. Then i need to winbox to the router and disable and then enable ospf hoping it will come back online. The poll intervall on the nmba routers are 1 minute. I have been waiting for 2 minutes and nothin...
by kameelperdza
Tue Apr 20, 2010 4:43 pm
Forum: Forwarding Protocols
Topic: Which routeros version works best with ospf v2?
Replies: 8
Views: 2133

Re: Which routeros version works best with ospf v2?

I have setup ospf again and so far it is working good. i have disabled my static routes incase i need to enable them.

Im going to test it for a week or so and if it works then i will use it.
by kameelperdza
Wed Apr 14, 2010 12:17 pm
Forum: Forwarding Protocols
Topic: Which routeros version works best with ospf v2?
Replies: 8
Views: 2133

Re: Which routeros version works best with ospf v2?

Could be, i have setup 3 static gateway with routing marks. I also see that on some of my routers is does not create a gateway so i has to make the gateway static.
by kameelperdza
Wed Apr 14, 2010 10:53 am
Forum: The Dude
Topic: how to access dude-3.5-mipsbe.npk on rb433?
Replies: 2
Views: 1105

how to access dude-3.5-mipsbe.npk on rb433?

Hi i have installed dude-3.5-mipsbe.npk on my rb433 running routeros 3.30

How do i access the dude? It was installed correctly but i does not see anything about dude when i login with webbox.
by kameelperdza
Wed Apr 14, 2010 10:23 am
Forum: Forwarding Protocols
Topic: Which routeros version works best with ospf v2?
Replies: 8
Views: 2133

Re: Which routeros version works best with ospf v2?

Yes it was a bit tricky, i managed to set it up.

But two days after that i had to move back to static routes again becos on router 1 it created a gateway to another router and not the router that gives internet.
by kameelperdza
Wed Apr 14, 2010 10:20 am
Forum: General
Topic: Low disk space
Replies: 7
Views: 2368

Re: Low disk space

I have installed dude pakage on my rb 411.

How do i access it?
by kameelperdza
Wed Apr 07, 2010 12:09 pm
Forum: Forwarding Protocols
Topic: ospf how to prevent some dynamic routes to be added??
Replies: 8
Views: 1988

Re: ospf how to prevent some dynamic routes to be added??

And how do i stop the ip range 192.168.10.0/24 to be redistributed on wlan2
by kameelperdza
Tue Apr 06, 2010 1:16 pm
Forum: Forwarding Protocols
Topic: ospf how to prevent some dynamic routes to be added??
Replies: 8
Views: 1988

ospf how to prevent some dynamic routes to be added??

O have setup ospf with nmba and it seems to be working. I have also noticed that it add all the routes that it can find as dynamic. Is there a way to prevent some routes to be added. for security reasons? Im planning to use 172.16.0.0/24 on my network. Currently i have three 192.168.0.0/24 networks ...
by kameelperdza
Sun Apr 04, 2010 7:02 pm
Forum: General
Topic: NMBA-OSPF can network work with only one designated router.
Replies: 1
Views: 924

NMBA-OSPF can network work with only one designated router.

I im busy setting up NMBA network using ospf. What i want to know is do i need to be connected directly to the designated router? The reason why i ask is becos my layout is like this. designated router ---> router2 ---> router3 ---> router4 When i setup nmba the only router that works with the desig...
by kameelperdza
Fri Apr 02, 2010 9:12 am
Forum: Forwarding Protocols
Topic: Which routeros version works best with ospf v2?
Replies: 8
Views: 2133

Which routeros version works best with ospf v2?

Hi i tried using ospf v2 on routeros 3.30 but got alot of packet disgarding errors in the logs, so i upgraded to version 4.6 and the problem disappeared. I do get minor error that says "link state changed from attemp to down" Now i would like to know what routeros version does the people that uses o...
by kameelperdza
Thu Apr 01, 2010 5:01 pm
Forum: General
Topic: value of dst-address must have all host bits zero????
Replies: 1
Views: 1225

value of dst-address must have all host bits zero????

Hi this is my network layout. I tried using ospf but it is not what i need, now i am busy setting up the routes between routers myself. There are one route that im having trouble with. On router 2 i added this........... ip address add address=172.23.128.93/28 network=172.23.128.92 broadcast=172.23....
by kameelperdza
Thu Apr 01, 2010 12:31 pm
Forum: General
Topic: Question about queues
Replies: 1
Views: 381

Question about queues

Hi i would like to know somrthing about queues I have setup two queues from the same subnet. The 1'st one is all traffic to 192.168.0.122. The second queue is for all traffic. What i would like to know will this works? Or will queue 2 interfere when queue 1 is active? 1 name="Derick1" target-address...
by kameelperdza
Wed Mar 31, 2010 9:31 am
Forum: Beginner Basics
Topic: Can this be done? With routing marks and routing policy?
Replies: 0
Views: 523

Can this be done? With routing marks and routing policy?

The company that i work for got a new voip system. I have connected two branches together using mikrotik rb433's On router 1 i am using routing marks and policy routing. I have set 192.168.12.0/24 to use gateway marked as "KKT". The routing is working 100% correct but here is what i want to do. 192....
by kameelperdza
Tue Mar 30, 2010 5:47 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

thanx :)
by kameelperdza
Tue Mar 30, 2010 5:38 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

Do you think i should add input and output aswell? If they try to ping with their mikrotik router? for example ip firewall filter add src-address=192.168.10.0/24 dst-address=192.168.11.0/24 action=drop chain=forward ip firewall filter add src-address=192.168.10.0/24 dst-address=192.168.11.0/24 actio...
by kameelperdza
Tue Mar 30, 2010 4:39 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

u think im only going to setup routing marks etc on router 1 and then use firewall rules to block connections between networks
by kameelperdza
Tue Mar 30, 2010 4:36 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

I did a tracert and it still chooses the gateway without the routing marks.
by kameelperdza
Tue Mar 30, 2010 4:34 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

ok i try
by kameelperdza
Tue Mar 30, 2010 4:20 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

So i should remove that and reaplce it with

ip route add dst-address=192.168.0.0/24 gateway=10.0.0.2 routing-mark=business
by kameelperdza
Tue Mar 30, 2010 4:12 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

If i setup router 1 with above then the packets do go through the correct gateway at the end. But this will mean that i can only have one gateway on the other router and both networks will go though the same gateway on router 2. I dont want the networks to be aware of each other, they should not be ...
by kameelperdza
Tue Mar 30, 2010 4:09 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

ip route add dst-address=192.168.0.0/24 gateway=10.0.0.
[/quote]


Hi sorry i mistyped. iT should actually be ip route add dst-address=192.168.0.0/24 gateway=10.0.0.2
by kameelperdza
Tue Mar 30, 2010 4:08 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

I did some tests yesterday. I created one routing-mark with one gateway on router1. And created a default gateway on second router. Networks was pinging fine until i added routing-marks, routing rules and mangle rules.
by kameelperdza
Tue Mar 30, 2010 4:01 pm
Forum: Forwarding Protocols
Topic: OSPF with routing marks and two gateways?
Replies: 8
Views: 1330

Re: OSPF with routing marks and two gateways?

yes thanx i managed to get it working.
by kameelperdza
Tue Mar 30, 2010 3:56 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

Maybe I misunderstood. There is no internet connection? Just two localnets? ADD: I think I see now. Both the gateways are on the same interface. Then you need to decide which gateway you want as default, and remove the routing mark from it. There should be no default gateway. I want all ip ranges t...
by kameelperdza
Tue Mar 30, 2010 3:50 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

On router 1 ip route add gateway=172.16.0.200 routing-mark=business ip route add gateway=172.16.0.201 routing-mark=personal 172.16.0.200 is gateway for business 172.16.0.201 is gateway for personal. If i setup only router 1 with above settings then internet works, but when i setup routing marks and ...
by kameelperdza
Tue Mar 30, 2010 3:40 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

you have to have normal default routes and deafault routes with routing mark.
can you give me an example?
by kameelperdza
Tue Mar 30, 2010 3:39 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Re: Please help me with this routing.

Can you show me "/ip firewall nat"?
I am not using natting.
The two gateways on router one are firewalls
by kameelperdza
Tue Mar 30, 2010 3:09 pm
Forum: Beginner Basics
Topic: Please help me with this routing.
Replies: 23
Views: 2323

Please help me with this routing.

HI there i realy hope that i will get a response. Is this possible???? I want to run personal and business wifi on one network. Personal will use 172.23.128.0/24 as backbone and business will use 10.0.0.0/24 as backbone. On router 1 i will do the following. ip address add address=172.23.128.1/30 int...
by kameelperdza
Mon Mar 29, 2010 9:36 am
Forum: Beginner Basics
Topic: Configuring point-to-point wireless link
Replies: 7
Views: 1810

Re: Configuring point-to-point wireless link

Try this. --SITE A-- ip address add address=192.168.0.2/24(change to same ip range of your linux box) interface=ehter1 ip address add address=192.168.1.1/24 interface=wlan1 ip route add dst-network=192.168.2.0/24 gateway 192.168.1.2 ip route add dst-network=0.0.0.0/0 gateway 192.168.0.1(change to sa...
by kameelperdza
Sun Mar 28, 2010 9:27 pm
Forum: Forwarding Protocols
Topic: vlan or ipip, having trouble setting it up.
Replies: 2
Views: 946

Re: vlan or ipip, having trouble setting it up.

Hi thanx for replying. I managed to get the internet working. This what i did. Router1 ip address add address=1.1.1.1/24 interface=vlan1 ip route add dst-address-192.168.4.0/24 gateway=1.1.1.2 router2 ip address add address=1.1.1.2/24 interface=vlan1 ip route add dst-address-0.0.0.0/0 gateway=1.1.1....
by kameelperdza
Sun Mar 28, 2010 8:52 pm
Forum: Beginner Basics
Topic: help
Replies: 3
Views: 536

Re: help

Hi you must have all of these otherwise it wont work. /ip firewall mangle add src-address=1.1.1.0/24 routing-mark=LINE1 action=mark-routing new-routing-mark=LINE1 /ip firewall mangle add src-address=2.2.2.0/24 routing-mark=LINE2 action=mark-routing new-routing-mark=LINE1 /ip route add dst-address=0....
by kameelperdza
Sun Mar 28, 2010 7:59 pm
Forum: Forwarding Protocols
Topic: IMHO is not working
Replies: 0
Views: 822

IMHO is not working

i gave two gateways on one router, and i have setup routings marks and routing rules to redirect routes. The problem is that when i create the same routes rules and routing marks on the 2nd and 3rf router then the network go down. But if i dont choose routing mark when creating static gateway then t...
by kameelperdza
Sat Mar 27, 2010 10:59 pm
Forum: Forwarding Protocols
Topic: vlan or ipip, having trouble setting it up.
Replies: 2
Views: 946

vlan or ipip, having trouble setting it up.

Hi there i want to setup ipip or vlan between two mikrotik r433 routers. Im currectly using routing. Which one is the best? I want to make network private from ospf and certian ip ranges on the network. One router 1 i have setup gateway as 172.16.0.200 The distination network on router 2 is 192.168....
by kameelperdza
Fri Mar 26, 2010 4:59 pm
Forum: Forwarding Protocols
Topic: OSPF with routing marks and two gateways?
Replies: 8
Views: 1330

Re: OSPF with routing marks and two gateways?

Ok thanx im try to setup ipip using this example. http://www.mikrotik.com/documentation/m ... #ht2178688

But is only shows how to png the remote ipip interface.

Im confused now. :? what i want to do is ipip 192.168.4.0/24 and 192.168.10.0/24.

Can you maybe help me?
by kameelperdza
Fri Mar 26, 2010 2:39 pm
Forum: Forwarding Protocols
Topic: OSPF with routing marks and two gateways?
Replies: 8
Views: 1330

Re: OSPF with routing marks and two gateways?

i saw this video on how to setup ipsec, i create two static routes on both ends and are able to access the internet, but will this help for what im trying to do?
by kameelperdza
Fri Mar 26, 2010 11:30 am
Forum: Forwarding Protocols
Topic: OSPF with routing marks and two gateways?
Replies: 8
Views: 1330

Re: OSPF with routing marks and two gateways?

should i use pptp pr ipip for tunneling
by kameelperdza
Fri Mar 26, 2010 10:41 am
Forum: Forwarding Protocols
Topic: OSPF with routing marks and two gateways?
Replies: 8
Views: 1330

OSPF with routing marks and two gateways?

Hi there here is my plan. Currently i have 4 routers and have setup ospf on them. On router 1 i have setup two static default routes with routing-marks. ospf is using 172.23.128.0/24 as backbone. What i want to do is add a second backbone 10.0.0.0/24 and route 3 ip ranges through it. The main edea i...
by kameelperdza
Tue Mar 23, 2010 3:41 pm
Forum: Forwarding Protocols
Topic: What do i need to change to add ospf to my network?
Replies: 7
Views: 1280

Re: What do i need to change to add ospf to my network?

The new routing looks correct but somehow i am unable to ping the remote ip address on the mikrotik. I can ping all the ip's on the first router but not the seond router. Might it be becos im using mangle rules, routing rules and that i have to gateways? The mangle and routing rules on router one lo...
by kameelperdza
Tue Mar 23, 2010 3:01 pm
Forum: Forwarding Protocols
Topic: What do i need to change to add ospf to my network?
Replies: 7
Views: 1280

Re: What do i need to change to add ospf to my network?

So far is looks great. thank you. I tried to setup it on my main wifi. And it works Would u recommend NBMA networks? In http://wiki.mikrotik.com/wiki/Manual:OSPF-examples they say it is more stable. thank you very much. PS: When will i use /routing ospf instance set default redistribute-connected=as...
by kameelperdza
Tue Mar 23, 2010 2:28 pm
Forum: Forwarding Protocols
Topic: What do i need to change to add ospf to my network?
Replies: 7
Views: 1280

Re: What do i need to change to add ospf to my network?

That good news, im having trouble setting it up. I tried to set it up between two routers. router1 eth1 (192.168.100.250/24), wlan1 (172.16.0.201/30) router2 eth1 (192.168.0.200/24), wlan1 (172.16.0.202(30) I have added this to both routers. routing ospf network add network=172.16.0.0/24 area: backb...
by kameelperdza
Tue Mar 23, 2010 2:08 pm
Forum: Forwarding Protocols
Topic: What do i need to change to add ospf to my network?
Replies: 7
Views: 1280

What do i need to change to add ospf to my network?

I want to setup ospf on my networks, but first want to know what i need to do.

Will i still need to "add dst-network=0.0.0.0/0 gateway=previous mikrotik" to ip route?
I usually used static routes, will i benifit from dynamic routing?
by kameelperdza
Thu Mar 18, 2010 11:05 am
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 380
Views: 236694

Re: NOT TO DO. Weird instalations?

lol
by kameelperdza
Thu Mar 18, 2010 9:02 am
Forum: The User Manager
Topic: Two userman servers?
Replies: 5
Views: 987

Re: Two userman servers?

want to use if radius1 is down,then radius 2 is backup.

This will mean that i have to update both router's userman configs.

If i could update only radius1 and make is sync with radius2 then that would be nice
by kameelperdza
Wed Mar 17, 2010 7:17 pm
Forum: The User Manager
Topic: Two userman servers?
Replies: 5
Views: 987

Re: Two userman servers?

thank you
by kameelperdza
Wed Mar 17, 2010 12:05 pm
Forum: The User Manager
Topic: Two userman servers?
Replies: 5
Views: 987

Two userman servers?

Hi i was wondering is it possible to have a backup radius server when using mikrotik radius. So when router1 is down then router 2 takes over.
by kameelperdza
Sat Mar 13, 2010 10:56 am
Forum: Forwarding Protocols
Topic: ospf discarding hallo packet
Replies: 3
Views: 3889

Re: ospf discarding hallo packet

Sorry my bad. forgot to change remote address subnet from 29 to 30
by kameelperdza
Fri Mar 12, 2010 8:15 pm
Forum: Forwarding Protocols
Topic: ospf discarding hallo packet
Replies: 3
Views: 3889

Re: ospf discarding hallo packet

The other end is actually /28. Looks like there is no solution. The log is full of it.

PS: I do know what it mean i want to know how to get rid of it without makeing both subnets the same
by kameelperdza
Fri Mar 12, 2010 2:10 pm
Forum: Forwarding Protocols
Topic: ospf discarding hallo packet
Replies: 3
Views: 3889

ospf discarding hallo packet

Hi i have setup ospf by just adding 172.23.1280/24 as backbone. My whole network is cut into smaller subnets. One one router i get this message in the logs, route,ospf,info Discarding Hello packet: mismatch in network mask 14:06:54 route,ospf,info mine=255.255.255.252 14:06:54 route,ospf,info remote...
by kameelperdza
Wed Mar 10, 2010 3:09 pm
Forum: General
Topic: Want to setup router1 as ntp server on network
Replies: 3
Views: 721

Re: Want to setup router1 as ntp server on network

I have followed the example on http://wiki.mikrotik.com/wiki/OSPF-examples Now i am able to ping ntp server(rb750g), The firewall logs shows that the link is active(port 123) but stil does not update the clock. Im also getting is ospf info alerts in my logs. Discarding Hello packet: mismatch in netw...
by kameelperdza
Mon Mar 08, 2010 8:51 pm
Forum: Beginner Basics
Topic: How to block encrypted p2p.
Replies: 26
Views: 10622

Re: How to block encrypted p2p.

I still think the 'inverse tagging' approach is the way to go. Just mark all 'known clean' connections like HTTP, DNS, Skype with L7 filter, and put everything else at the lowest priority. Has been working wonderfully for almost a year at a 500-room hotel with wired ports in each room, on a 12Mb/51...
by kameelperdza
Mon Mar 08, 2010 10:37 am
Forum: Beginner Basics
Topic: How to block encrypted p2p.
Replies: 26
Views: 10622

Re: How to block encrypted p2p.

you should try ipcop. www.ipcop.org. Its free and also do the same stuff. You can add more thing if you need to.
by kameelperdza
Sun Mar 07, 2010 12:23 pm
Forum: Beginner Basics
Topic: How to block encrypted p2p.
Replies: 26
Views: 10622

Re: How to block encrypted p2p.

We also bought a machine that can recognize and block or limit encrypted p2p traffic and it works perfect. it can also do lots of work but it is not relevant to this topic. it works between internet and mikrotik. My problem is solved.

So what is the name of the machine?
by kameelperdza
Fri Mar 05, 2010 8:18 am
Forum: General
Topic: Want to setup router1 as ntp server on network
Replies: 3
Views: 721

Re: Want to setup router1 as ntp server on network

Hi there yes i would like some help please. i have setup static routes. router1; [admin@KKT-HS] /ip address> print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 172.16.0.1/24 172.16.0.0 172.16.0.255 ether1 1 172.23.128.1/29 172.23.128.0 172.23.128.7 bridge1 2 ...
by kameelperdza
Thu Mar 04, 2010 4:45 pm
Forum: General
Topic: Want to setup router1 as ntp server on network
Replies: 3
Views: 721

Want to setup router1 as ntp server on network

Hi i have 4 mikrotik rb433's that is connected to each other using r5h mini cards. I have successfully setup routing. But now i want to setup router1 as ntp server. I am unable to ping router1 from router4 using /tools/ping or traceroute. But can ping router 1 from router 2.
by kameelperdza
Wed Feb 24, 2010 4:21 pm
Forum: Wireless Networking
Topic: Routers wont connect to each other.
Replies: 2
Views: 494

Re: Routers wont connect to each other.

The ccq and signal is better in b-mode.

What i did was is to buy a 3meter mast and replaced the antenna with a 5ghz cpe.

cheers
by kameelperdza
Wed Feb 24, 2010 8:40 am
Forum: Wireless Networking
Topic: Routers wont connect to each other.
Replies: 2
Views: 494

Routers wont connect to each other.

Hi if i set my client router (rb411) to use only 2.4ghz-b and accesspoint (rb433) to use 2.4ghz b/g then they wont connect to each other. I have set the data-rates to 36mbits for g and 1mbits, 2mbits, 5.5mbits and 11mbits for b. If i set the data rates to default then they connect but ccq is very ba...
by kameelperdza
Mon Feb 22, 2010 1:45 pm
Forum: General
Topic: Where can i find routerboard 14 windows xp driver?
Replies: 5
Views: 966

Re: Where can i find routerboard 14 windows xp driver?

thanx i know that now. im downloading r52 driver
by kameelperdza
Mon Feb 22, 2010 1:13 pm
Forum: General
Topic: Where can i find routerboard 14 windows xp driver?
Replies: 5
Views: 966

Re: Where can i find routerboard 14 windows xp driver?

But can i use it in my windows computer to connect to the wifi in my house?
by kameelperdza
Mon Feb 22, 2010 11:24 am
Forum: General
Topic: Where can i find routerboard 14 windows xp driver?
Replies: 5
Views: 966

Where can i find routerboard 14 windows xp driver?

Looking for windows xp driver for routerboard 14.

Hi i have put the rb14 in my pc that have windows xp installed on it. Is it possible to use card as wireless client in windows.
by kameelperdza
Thu Feb 18, 2010 9:21 am
Forum: Wireless Networking
Topic: SSID is hidden but still shows.
Replies: 4
Views: 737

Re: SSID is hidden but still shows.

WDS is disabled. I have reset interface to default settings. It is working correct now.

thanx
by kameelperdza
Thu Feb 18, 2010 8:12 am
Forum: Wireless Networking
Topic: SSID is hidden but still shows.
Replies: 4
Views: 737

Re: SSID is hidden but still shows.

I have double checked and it is applied. And the box "Hide SSID is clicked". Im using ROS 3.30 on all my routers and only the one is doing it. I have just done some test. I used a rb433 and when i do a scan i see that it shows only the AP mac address but after 2 seconds it also shows the ssid. My la...
by kameelperdza
Wed Feb 17, 2010 2:20 pm
Forum: Wireless Networking
Topic: SSID is hidden but still shows.
Replies: 4
Views: 737

SSID is hidden but still shows.

The SSID on one of my towers is hidden but it still shows when i scan. I have double that the "hide SSID" is ticked but it does not work. It is only on one internet. I have a r52 in that slot. Can it be that the mini card is doing it?
by kameelperdza
Wed Feb 17, 2010 8:31 am
Forum: General
Topic: Admin MAC which allows access even if firewall is blocking.
Replies: 1
Views: 765

Admin MAC which allows access even if firewall is blocking.

Sometimes when i try to setup mikrotik firewall i will block myself from getting in again. So then i have to climb ontop of the roof to reset the board. If mikroitk can add a function such as adding a pc mac address which will allow a certian computer to access mikrotik and disable/edit firewall rul...
by kameelperdza
Thu Jan 28, 2010 4:39 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Hi there i have connected a new router to router 3. I can ping that new router from any ip on the wifi but cannot ping and ip's on the eth1(router1) from the new router. So i added natting with masquarade. Will is cause problems if there is also natting on router 1 and the ipcop firewall? PS: Router...
by kameelperdza
Tue Jan 26, 2010 9:50 am
Forum: General
Topic: New RB433 boots but no internet connectivity on any port.
Replies: 2
Views: 446

Re: New RB433 boots but no internet connectivity on any port.

Ok they have replaced the rb433 with a new one. :D
by kameelperdza
Thu Jan 21, 2010 12:32 pm
Forum: The User Manager
Topic: Questions about Userman
Replies: 2
Views: 781

Re: Questions about Userman

thanx. I have bought a rb750g and have setup it as the radius server. The ip of the rb750g is 178.242.0.150 I have noticed that i have to add 178.242.0.150 to each router in /radius/wireless. I usually had to enter the wlan address of the router next in line. Does this mean that the router connects ...
by kameelperdza
Tue Jan 19, 2010 10:07 pm
Forum: General
Topic: New RB433 boots but no internet connectivity on any port.
Replies: 2
Views: 446

New RB433 boots but no internet connectivity on any port.

Today i bought a new rb433. I setup everything and finally when i connected the poe i could not login to router. The first thing that came to mind was that the connector might be faulty, so i replaced it. No luck. The second thing i tried was to remove routerboard from case and put it on direct powe...
by kameelperdza
Tue Jan 12, 2010 12:16 pm
Forum: Beginner Basics
Topic: signal issues
Replies: 10
Views: 840

Re: signal issues

try something else such as a coin or wire..

Maybe you should return it as it might be faulty
by kameelperdza
Tue Jan 12, 2010 10:44 am
Forum: Beginner Basics
Topic: signal issues
Replies: 10
Views: 840

Re: signal issues

You should hold it untill the router beeps.
Sotimes i do it twice just to be certian.

I cant remember if the routerboard beeps when you power it on. But you sjould wait untill the routerboard has booted up. It usualy takes 30 seconds depending on the rules.
by kameelperdza
Tue Jan 12, 2010 9:22 am
Forum: Beginner Basics
Topic: signal issues
Replies: 10
Views: 840

Re: signal issues

by kameelperdza
Thu Jan 07, 2010 3:59 pm
Forum: Beginner Basics
Topic: signal issues
Replies: 10
Views: 840

Re: signal issues

Try different channel or freq. Some channels have more noise than other.
by kameelperdza
Thu Jan 07, 2010 3:57 pm
Forum: Beginner Basics
Topic: Port forward from mikrotik to ipcop
Replies: 9
Views: 2901

Re: Port forward from mikrotik to ipcop

Did it work?
by kameelperdza
Tue Jan 05, 2010 9:52 am
Forum: Beginner Basics
Topic: Port forward from mikrotik to ipcop
Replies: 9
Views: 2901

Re: Port forward from mikrotik to ipcop

Look at my settings
by kameelperdza
Tue Jan 05, 2010 9:33 am
Forum: Beginner Basics
Topic: Port forward from mikrotik to ipcop
Replies: 9
Views: 2901

Re: Port forward from mikrotik to ipcop

Ok try this. 1. You can give ipcop static ip address or leave it that way. In alias create 192.168.88.250 but make sure that that ip is not being used. Then in port forward choose tcp or udp ,change default alias to your new alias, in distination ip put the ip of computer you want port to be forward...
by kameelperdza
Mon Jan 04, 2010 2:35 pm
Forum: Forwarding Protocols
Topic: How to add 2 gateways and seperate clients
Replies: 10
Views: 27716

Re: How to add 2 gateways and seperate clients

Thank you. I managed to figure it out but when i tried to ping i got TTL expired in transit.
So i tried to run tracert and saw that routing was looping. I added wlan1 to /firewall/mangle/rule1 and now is working.

thank you very much
by kameelperdza
Mon Jan 04, 2010 9:57 am
Forum: Beginner Basics
Topic: Port forward from mikrotik to ipcop
Replies: 9
Views: 2901

Re: Port forward from mikrotik to ipcop

1. What ips are your Internet-----Mikrotik-------ipcop-------LAN 2. So you saying that mikrotik(in & out interface) is in the same bridge? So if internet ip is 192.168.2.1 then mikrotik bridge is 192.168.2.2 and ipcop red is 192.168.2.3 If so then all you need to do is to let your isp or urself forw...
by kameelperdza
Thu Dec 31, 2009 7:19 am
Forum: Forwarding Protocols
Topic: How to add 2 gateways and seperate clients
Replies: 10
Views: 27716

Re: How to add 2 gateways and seperate clients

Im a bit confused.

I want to allow ip range 198.54.15.0/24 and 192.168.10.0/24 to use 178.242.0.200 as their gateway
And allow 192.168.11.0/24 and 192.168.12.0/24 to use 172.16.0.200 as their gateway.

Can you maybe show me how.
thanx
by kameelperdza
Wed Dec 30, 2009 4:32 pm
Forum: Beginner Basics
Topic: How to block encrypted p2p.
Replies: 26
Views: 10622

Re: How to block encrypted p2p.

What i did to stop p2p completely is to put a firewall(ipcop) between mikrotik and internet. I have installed a addon which i can administrate and controll ports. If you can find a way to allow only needed ports on your mikrotik rb then that would help. Im only allowing port 80,25 and 110. P2p wont ...
by kameelperdza
Wed Dec 30, 2009 4:24 pm
Forum: Beginner Basics
Topic: v4.3 and RB433's
Replies: 4
Views: 1226

Re: v4.3 and RB433's

I used 4.3 and downgrade to 3.30. Evrybody says 3.30 is the more stable
by kameelperdza
Wed Dec 30, 2009 4:20 pm
Forum: Beginner Basics
Topic: Port forward from mikrotik to ipcop
Replies: 9
Views: 2901

Re: Port forward from mikrotik to ipcop

Are you using routing?

And does your internet work
by kameelperdza
Wed Dec 30, 2009 4:11 pm
Forum: Beginner Basics
Topic: Check Online Users.
Replies: 3
Views: 659

Re: Check Online Users.

/ip firewall connection> print
shows current active connections.
by kameelperdza
Wed Dec 30, 2009 12:10 pm
Forum: Beginner Basics
Topic: Port forwarding is not working
Replies: 7
Views: 1388

Re: Port forwarding is not working

What i would have done is to add internal webserver to your dns server. So when when users request that webste then it will automatically use port 80.

For example if you are using router1 as your dns server.
/ip dns static add address=xxx.xxx.xxx.xxx name=www.google.com
by kameelperdza
Wed Dec 30, 2009 11:44 am
Forum: Forwarding Protocols
Topic: How to add 2 gateways and seperate clients
Replies: 10
Views: 27716

Re: How to add 2 gateways and seperate clients

When i add a second gateway to the existing gateway then the internet wont work. you mean, 'add second gateway to the existing default route'? it's called ECMP and it should work - check your NAT rules... but if you need something more cool than ECMP - you create different default routes with diffe...
by kameelperdza
Tue Dec 29, 2009 2:33 pm
Forum: The User Manager
Topic: Questions about Userman
Replies: 2
Views: 781

Questions about Userman

Im using userman with wireless and would like to know some things. There is two rb433's that connect to each other using wlan1.Userman is setup on router 1 and radius on router 2 is set to router 1. When im in userman then i need to add router 2 to /userman/routers and userman/users otherwise it wot...
by kameelperdza
Mon Dec 28, 2009 4:29 pm
Forum: Forwarding Protocols
Topic: How to add 2 gateways and seperate clients
Replies: 10
Views: 27716

Re: How to add 2 gateways and seperate clients

Thank you for your help :D
by kameelperdza
Sun Dec 27, 2009 7:41 pm
Forum: Forwarding Protocols
Topic: How to add 2 gateways and seperate clients
Replies: 10
Views: 27716

How to add 2 gateways and seperate clients

Im using routing on my mikrotiks and was able to setup a gateway by doing this. add dst network 0.0.0.0/0 gateway 178.242.0.200 But i want to add a second gateway and seperate the busy client from he non-busy clients. When i add a second gateway to the existing gateway then the internet wont work. S...
by kameelperdza
Sat Dec 26, 2009 12:33 am
Forum: General
Topic: Is it possible to limit p2p even lower than 64kb/s ?
Replies: 2
Views: 1015

Re: Is it possible to limit p2p even lower than 64kb/s ?

Thank you i have aleady that setup. I have found a way to limit p2p to any number of bits you would like. Under "Simple Queue <p2p>" click on "Total" tab and put in any desired value in "Total Limit At" field. I have made mine 2000 bits/s. The torrent speeds does not exceed 1kb and that is one way t...
by kameelperdza
Fri Dec 25, 2009 3:51 pm
Forum: General
Topic: Is it possible to limit p2p even lower than 64kb/s ?
Replies: 2
Views: 1015

Is it possible to limit p2p even lower than 64kb/s ?

There is a client on my wan that wants to do p2p. I am able to limit him to 64kb/s with qeue's but want to make his p2p even slower like 16kb/s or 8kb/s

Is there a way to make p2p so slow that it barely cant work. Im thinking about QoS but will that work? Then i can set p2p to low priority.
by kameelperdza
Wed Dec 23, 2009 1:52 pm
Forum: General
Topic: Does mikrotik forward computer mac address to gateway?
Replies: 5
Views: 711

Re: Does mikrotik forward computer mac address to gateway?

And what about radius? What if i setup radius on on ap, will i need to use ip addresses or mac addresses to control who connects?
by kameelperdza
Mon Dec 21, 2009 3:52 pm
Forum: General
Topic: Does mikrotik forward computer mac address to gateway?
Replies: 5
Views: 711

Does mikrotik forward computer mac address to gateway?

I dont know if this is a mikrotik or ipcop issue. My setup is like this.Mikrotik route all traffic to ipcop for filtering and user management. The firewall(ipcop) checks each computer's mac address and if it is on the allow list then that computer is allowed to connect to the internet. I ahve done s...
by kameelperdza
Mon Dec 21, 2009 11:22 am
Forum: Wireless Networking
Topic: Need help; Wireless card does not show in interface!
Replies: 4
Views: 603

Re: Need help; Wireless card does not show in interface!

remove the card and put it back in. Or try another card. You can also try ti switch the cards by putting card1 in slot 2 and card2 in slot 1. You might have a faulty card. I also hard a rb133 adn card was damaged by static
by kameelperdza
Fri Dec 18, 2009 7:39 pm
Forum: Beginner Basics
Topic: Mikrotik proxy.
Replies: 22
Views: 5063

Re: Mikrotik proxy.

i know that it is ipcop problem. ipcop forum is going to help me with that.. im glad that i can do routing now,it was very confusing but i understand now. thank you surfer tim for helping me with routing between mikrotiks.
by kameelperdza
Fri Dec 18, 2009 11:53 am
Forum: Beginner Basics
Topic: Mikrotik proxy.
Replies: 22
Views: 5063

Re: Mikrotik proxy.

so can i make IPCOP work with the mikrotik????? I also have ipcop and my ipcop is working correclty. I still have some problems with internet when i setup routing on my mikrotik rb's. The problem that i have is that i cannot ping past eth1(red internet on ipcop) when i ping from mikrotik router. ht...
by kameelperdza
Fri Dec 18, 2009 8:59 am
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

The mikrotik setup is correct and working, but stil have problem with dns. I have posted a new question on their forum asking them what i can do.

http://www.ipcops.com/phpbb3/viewtopic. ... 342#p73342
by kameelperdza
Fri Dec 18, 2009 7:56 am
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Cool i will try that and let you know if it works. One more thing that i want to know is when my pc at home connect to internet will i be connecting with my computer's mac address or router1 mac address? Becos i only want to allow certian computer on wan to connect to internet(eth1), but want everyo...
by kameelperdza
Thu Dec 17, 2009 3:53 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Stil have a small dns problem which i will sort out later. I am able to ping both ways from my server and from the mikrotik.
by kameelperdza
Thu Dec 17, 2009 3:04 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

i was able to setup routing in router0.

the code is route add -net 192.168.200.0 gw 192.168.10.1 netmask 255.255.255.0

Now i can ping 192.168.200.x

thnax for all your help. you helped me alot
by kameelperdza
Thu Dec 17, 2009 2:32 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

not yet. i have ipcop server, will try to set it up quickly
by kameelperdza
Thu Dec 17, 2009 2:14 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Sorry for the confusion. the first one was my test mikrotik that i first was testing how to setup routing. This one that i want to do now is the real one. Is is like this router3(jack's house) <----> router1(office){internet} ----router2(my house) router1(office) eth1[192.168.0.10/24] eth2[192.168.1...
by kameelperdza
Thu Dec 17, 2009 1:03 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Why is routing so confising? Here is a new example that i want to try. router1(office) eth1[192.168.0.10/24] eth2[192.168.10.1/24] bridge1(wlan1+2+3)[192.200.0.1/24] router2(my house) eth1[192.168.200.1/24] bridge1(wlan1+2+3)[192.100.0.1/24] router3(other house) eth1[192.168.50.1/24] bridge1(wlan1+2...
by kameelperdza
Thu Dec 17, 2009 10:29 am
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Everything is working great,the only problem that i have now is that the internet does not work. i can ping 192.168.10.200 but there is no internet. The reason might be becos 192.168.10.0/24 cant ping 192.168.200.0/24
by kameelperdza
Tue Dec 15, 2009 6:29 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

yes its s nice place, about 80km from the sea. But it can get very hot here, about 41'c in the summer
by kameelperdza
Tue Dec 15, 2009 4:52 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Thank you very much for that info. I have been searching everywhere for that answers and finally got it. Thanx you for helping me out my nightmares. Thanx again :D
by kameelperdza
Tue Dec 15, 2009 4:45 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Ok thanx so what you telling me is that router0(eth1) wont be able to ping any of the interfaces on the other routers?

Becos im unable to ping wlan1 on router2 from eth1 on router1
by kameelperdza
Tue Dec 15, 2009 4:39 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

I don't know about that device, but if it was a Mikrotik router: /ip route add dst-address=192.168.2.0/24 gateway=192.168.0.10 add dst-address=192.168.3.0/24 gateway=192.168.0 10 add dst-address=192.168.200.0/24 gateway=192.168.0.10 add dst-address=192.168.160.0/24 gateway=192.168.0.10 Must i add t...
by kameelperdza
Tue Dec 15, 2009 4:28 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

I have setup a firewall/proxy server(192.168.0.14) that filters all internet traffice and also controlls port mapping and firewall rules. The firewall conencts to a dsl router.
by kameelperdza
Tue Dec 15, 2009 4:23 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Thank you. Sorry for asking can you please tell me what i must add so that i can ping from 192.168.0.0/24.

Or is it impossible?
by kameelperdza
Tue Dec 15, 2009 4:08 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Yes on 192.168.0.0/24 there is also computers. I have a proxy server on 192.168.0.0/24 that i want to use as dns server for the wan.
by kameelperdza
Tue Dec 15, 2009 4:00 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Thank you very much, im unable to ping from 192.168.0.x/24 to 192.168.2.x. But im able to ping from 192.168.2.x/24 to 192.168.0.x/24.
by kameelperdza
Tue Dec 15, 2009 2:56 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Re: Need help with setting up routing between 3 mikrotiks.

Hi yes it is correct.for example what i want to do is allow computer on router3(eth1 = 192.168.160.4) to see computer on router1(192.168.0.22) and vise versa. Im starting a wireless group and will have alot of nodes conencting(mikrotik and non-mikrotik). That is why i need to allow anyone on any rou...
by kameelperdza
Tue Dec 15, 2009 2:24 pm
Forum: Beginner Basics
Topic: Need help with setting up routing between 3 mikrotiks.
Replies: 34
Views: 2011

Need help with setting up routing between 3 mikrotiks.

Hi can someone please help me with routing please. I have 2 rb433's and one rb411. IP setup is like this Router1 - eth1(192.168.0.10/24) - wlan1(192.168.2.1/24) Router2 - eth1(192.168.200.1/24) - wlan1(192.168.2.2/24) - wlan2(192.168.3.1/24) Router1 - eth1(192.168.160.1/24) - wlan1(192.168.3.2/24) W...
by kameelperdza
Tue Dec 15, 2009 10:41 am
Forum: Beginner Basics
Topic: pounding my head against my mikrotik
Replies: 3
Views: 1352

Re: pounding my head against my mikrotik

I have a similar problem. I have setup routing on two mikrotik router. router1 has eth1(192.168.0.10/24) and wlan1(192.168.9.1/24),router2 has eth1(192.168.10.1/24) and wlan1(192.168.9.2/24). I am able to ping from router2 (wlan1+eth1) to wlan1 and eth1 on router1. and i can only ping from wlan1 on ...
by kameelperdza
Sun Dec 13, 2009 7:06 pm
Forum: Forwarding Protocols
Topic: Please help me with this routing.
Replies: 1
Views: 708

Please help me with this routing.

Hi i want to setuo routing between two three mikrotik routers but im getting confused at some areas. router 1 has wlan1 10.1.1.1/24 ,eth1 192.168.1.1/24 router 2 has wlan1 10.1.1.2/24 ,wlan2 10.1.2.1/24 ,eth1 192.168.2.1/24 router 3 has wlan1 10.1.2.2/24 ,eth1 192.168.3.1/24 I want to setup routing ...
by kameelperdza
Sun Dec 13, 2009 6:25 pm
Forum: Forwarding Protocols
Topic: How to Access Mikrotik from different IP location
Replies: 4
Views: 2126

Re: How to Access Mikrotik from different IP location

Are the Mikrotik router on the same lan as you are? If not then you need too open port 22 and forward it to the mikrotik router's ip address. But beware anyone can then access your mikrotik router and try to login. What i have done is to open a random port such as 453 and then forward port 453 to po...
by kameelperdza
Tue Nov 17, 2009 7:07 am
Forum: Forwarding Protocols
Topic: What does rip do?
Replies: 2
Views: 793

Re: What does rip do?

Ok thanx, what can i use so that mikrotik and non-mikrotik routers and users can connect to each other and share data? At the moment im using eoip which put everyone on one iprange
by kameelperdza
Mon Nov 16, 2009 11:35 pm
Forum: Forwarding Protocols
Topic: What does rip do?
Replies: 2
Views: 793

What does rip do?

Does eoip and rip work the same way? If i use rip will each user need their own ip range? And will they be able to connect to each other? I have founf a tutorial on how to setup rip on client but how do i set it up on the access point? I cannot use eoip anyone becos there is non-mikrotik clients here
by kameelperdza
Mon Nov 09, 2009 7:05 pm
Forum: Forwarding Protocols
Topic: Need help to setup RIP correctly
Replies: 0
Views: 549

Need help to setup RIP correctly

Hi there im trying to setup rip at the moment. i have followed the steps on http://wiki.mikrotik.com/wiki/How_to_set_wireless_client_and_Ethernet But what i want to know is must rip also be setup on the AP? And do i still need to add masquerade to the router? I have followed the step but does not wo...
by kameelperdza
Sun Nov 01, 2009 11:21 am
Forum: RouterBOARD hardware
Topic: Is it possible to put non-mikrotik clinets on same iprange??
Replies: 1
Views: 562

Re: Is it possible to put non-mikrotik clinets on same iprange??

My setup is like this. Mirkotik RB 1 Bridge 1 = 172.19.85.201 wlan 1 = 10.0.0.1 wlan 2 = 10.0.1.1 eth1 = disabled eth2 = no ip interfaces in bridge is = eoip1 eoip2 eth2 Mikrotik RB 2 Bridge 1 = 172.19.85.202 wlan 1 = 10.0.0.2 eth 1 = no ip wlan2 = no ip interface in bridge is = eoip1 eth1 wlan2 All...
by kameelperdza
Sun Nov 01, 2009 11:09 am
Forum: RouterBOARD hardware
Topic: Can i limit file tranfering to 128kb/s
Replies: 4
Views: 599

Re: Can i limit file tranfering to 128kb/s

I want to start a wireless user group which will allow users to connect to each other, play game and voip etc.... I have setup radius with wireless on one router. All the other mikrotik ap's is setup to use that radius server. Im not going to give internet but only allow them to share data between e...
by kameelperdza
Sun Nov 01, 2009 9:52 am
Forum: RouterBOARD hardware
Topic: Can i limit file tranfering to 128kb/s
Replies: 4
Views: 599

Re: Can i limit file tranfering to 128kb/s

Thanx but must i set it up on all the mikrotik routers? Or only the one that tun radius?
by kameelperdza
Sat Oct 31, 2009 6:43 pm
Forum: RouterBOARD hardware
Topic: Can i limit file tranfering to 128kb/s
Replies: 4
Views: 599

Can i limit file tranfering to 128kb/s

I have my own wireless group and my clients will share data and transfer big files. I want to know is is possible to limit each client to 128 mb/s for file tranfering?
by kameelperdza
Sat Oct 31, 2009 5:33 pm
Forum: RouterBOARD hardware
Topic: Is it possible to put non-mikrotik clinets on same iprange??
Replies: 1
Views: 562

Is it possible to put non-mikrotik clinets on same iprange??

Im using eoip and bridge so that all my mikrotik clients can have the same iprange.

How can i add a non-mikrotik router so that is also can use the iprange?
by kameelperdza
Fri Oct 30, 2009 7:44 pm
Forum: General
Topic: Have a damaged my RB??
Replies: 2
Views: 430

Have a damaged my RB??

i almost broke my rb433 and it felt like if i can cry becoz of the dissapointment. But luckily it did not. What went wrong is i replace the r45 plug on the poe side. The plug keep sliding out so i decided to replace it. Im running a straight cable from the poe device to my rb433. The setup is like t...
by kameelperdza
Wed Oct 28, 2009 8:06 am
Forum: The User Manager
Topic: Userman help please. 4 timeouts after every reboot.
Replies: 3
Views: 1837

Re: Userman help please. 4 timeouts after every reboot.

Thanx my radius is working but i still get timeouts. I have done some test. First i set time ms to 100ms and then to 3000ms. I have disabled all wlan interfaces and rebooted the mikrotik.When i checked the radius status i saw that there was 4 timeout. So i went to useman/log and see there is four er...
by kameelperdza
Mon Oct 26, 2009 11:27 pm
Forum: The User Manager
Topic: Userman help please. 4 timeouts after every reboot.
Replies: 3
Views: 1837

Userman help please. 4 timeouts after every reboot.

Hi when i reboot my mikrotik then when it starts and i cheack my radius server then it will show that there is 4 timeouts. But everyone that should be connected is connected. And there is no one that is trying to connect to me. Here is what userman log says 16 0.0.0.0 127.0.0.1 Jan/01/2002 01:00:09 ...
by kameelperdza
Wed Oct 21, 2009 12:05 am
Forum: RouterBOARD hardware
Topic: Routerboard shows no hdd space but there is no files.
Replies: 7
Views: 1545

Re: Routerboard shows no hdd space but there is no files.

Problem solved. There was old user manager files stored on the router. I had to disable userman so that i can delte the old backup file. I reenabled userman pakage after i have done it and i freed up 30mb of space.
by kameelperdza
Mon Oct 19, 2009 7:21 pm
Forum: RouterBOARD hardware
Topic: Routerboard shows no hdd space but there is no files.
Replies: 7
Views: 1545

Re: Routerboard shows no hdd space but there is no files.

I see that in the store list i can format or clean drive. But what will format do and what will clean do? Will both of then earse routeros from routerboard? :? If i can erase all unwanted stuff and only leave the routeros on it then that would be good
by kameelperdza
Mon Oct 19, 2009 12:15 pm
Forum: RouterBOARD hardware
Topic: Routerboard shows no hdd space but there is no files.
Replies: 7
Views: 1545

Re: Routerboard shows no hdd space but there is no files.

Thanx i have removed some of then and only left advanced tools, ntp, routerboard, routing,m security and system on it. That only freed up 12mb of space. What can use the other 48mib of space? Where can i look to free more space?
by kameelperdza
Mon Oct 19, 2009 11:33 am
Forum: RouterBOARD hardware
Topic: Routerboard shows no hdd space but there is no files.
Replies: 7
Views: 1545

Re: Routerboard shows no hdd space but there is no files.

The pakages look the same on the other router. And it works correct
by kameelperdza
Mon Oct 19, 2009 10:59 am
Forum: RouterBOARD hardware
Topic: Routerboard shows no hdd space but there is no files.
Replies: 7
Views: 1545

Routerboard shows no hdd space but there is no files.

I have a RB433 and is currently have routeros 3.28. Im trying to update it to 4.1 but is wont. Also when it reboots then it will loose any recent saved changes I tried to reset it from console, also tried the reset switch on the board. But still does not work. In resources it shows free memory is 48...
by kameelperdza
Mon Oct 05, 2009 9:32 am
Forum: General
Topic: feature needed:Natting using client mac address as source.
Replies: 6
Views: 1208

Re: feature needed:Natting using client mac address as source.

what i want to do is masquerade mac address xx.xx.xx.xx.xx.xx and allow it to access the ip range on the other side.
by kameelperdza
Sat Oct 03, 2009 9:10 pm
Forum: General
Topic: feature needed:Natting using client mac address as source.
Replies: 6
Views: 1208

feature needed:Natting using client mac address as source.

Would be nice. At the moment i have to put ip address as source and that can cause problems if someone else uses that ip.
by kameelperdza
Wed Aug 19, 2009 12:21 pm
Forum: General
Topic: Can i bind an ip address to a mac address?
Replies: 2
Views: 668

Re: Can i bind an ip address to a mac address?

Do not think so, im using radius + wireless. I will add members to my user group soon. If they set their ip to one of those that are allowed to connect to internet then they will have internet. And that i do not want. Ons of the wisp here is assigning ip addresses to new clients. He told me he had t...
by kameelperdza
Wed Aug 19, 2009 11:41 am
Forum: General
Topic: Can i bind an ip address to a mac address?
Replies: 2
Views: 668

Can i bind an ip address to a mac address?

I’m starting my own wireless group which will allow anyone to connect and use the local services for free. But the problem is that I have 4 people that use the internet connection from the office to get internet access at home. I don’t want to allow anybody else to use the internet connection. Can i...
by kameelperdza
Fri Aug 07, 2009 9:54 pm
Forum: Wireless Networking
Topic: My r52h cant be set higher thanv20dbm
Replies: 9
Views: 901

Re: My r52h cant be set higher thanv20dbm

Ok i think i will use 20dbm.
by kameelperdza
Fri Aug 07, 2009 9:08 pm
Forum: Wireless Networking
Topic: My r52h cant be set higher thanv20dbm
Replies: 9
Views: 901

Re: My r52h cant be set higher thanv20dbm

cool so must i set my tx-power mode to "card rates". what do you use?
by kameelperdza
Fri Aug 07, 2009 4:31 pm
Forum: Wireless Networking
Topic: My r52h cant be set higher thanv20dbm
Replies: 9
Views: 901

Re: My r52h cant be set higher thanv20dbm

Hmm but 25 is the default. Why would they set 25dbi at the default when it will damage the card?The higest i ever got with my r5h card is 36.

Is 20dbi = 100mw?
by kameelperdza
Fri Aug 07, 2009 9:55 am
Forum: Wireless Networking
Topic: My r52h cant be set higher thanv20dbm
Replies: 9
Views: 901

Re: My r52h cant be set higher thanv20dbm

I have two r52h cards on my rb433. The one did show that the default is 25 and the other one showed 20.

I was able to change the default settings back to normal after i have the card rates to 25 and then back to default.
by kameelperdza
Wed Aug 05, 2009 11:33 pm
Forum: Wireless Networking
Topic: My r52h cant be set higher thanv20dbm
Replies: 9
Views: 901

Re: My r52h cant be set higher thanv20dbm

I was able to change it to 25dbm. What i did was i choose card rates and made it 25, then clicked on apply. The dbm stayed 25 when i changed it to dafault.


So now it works on 25 dbm. great.
by kameelperdza
Wed Aug 05, 2009 11:04 pm
Forum: Wireless Networking
Topic: My r52h cant be set higher thanv20dbm
Replies: 9
Views: 901

My r52h cant be set higher thanv20dbm

I have two r52h cards but when i set the TX-power then i can only set one of them to 25dbm. But one of then cant be set to 25dbm. When i choose default then it only shows 20dbm. Why is that so? Im sure that i have installed a r52h card.
by kameelperdza
Wed Aug 05, 2009 5:19 pm
Forum: General
Topic: having trouble conecting to pppoe router on ether1 interface
Replies: 0
Views: 286

having trouble conecting to pppoe router on ether1 interface

The ether1 ip address of my mikrotik is 192.168.0.0/24 and i have a adsl router connected on that range. The wlan1 ip range is 192.168.8.0/24 and i have a friend that want to use the pppoe router that is connected on the 192.168.0.0/24 range. The problem is that he cannot connect to the pppoe router...
by kameelperdza
Wed Aug 05, 2009 12:29 pm
Forum: Wireless Networking
Topic: Can i set my r5h card tx-power to 25?
Replies: 3
Views: 519

Re: Can i set my r5h card tx-power to 25?

Thanx i think i going to leave it default
  • 1
  • 2