Have the same problem!

Hello!

We use Dude ver.4.0beta3 for configuring and monitoring our mikrotik network.
For security reason we change default port for winbox and ssh. How to change default port on our (changed) in dude, for connect to routeros from dude. And we want update routeros from dude.
Thanks!

Hello all! I tied to run command in scipt (ver 4.xx) but nothing work! I think that command /system routerboard upgrade prompt "Yes" to accept, but in script this command not working. # Check bios firmware :if ( [/system routerboard get current-firmware] != [/system routerboard get upgrade...

Thanks Mikrotik for live video, but please turn webcam on board, text not see, or stream highest resolution.

p.s. When you plan MUM in Ukraine?

We have same problem, when temperature up to 30 c*, RB800 hang, only power off/on can starts up. MIKROTIK fix this bug, tower 80 meters, it hard to up/down several time in day.....

First of all you need to clear line of sight. you may use program like RadioMobile to calculate the path.
Good mini-pci card with MMCX connector like R5H or XR5
Good antenna, like this http://en.jirous.com/antenna-5ghz/jrc-29
and good NType-NType cable.

The last month we had strange problem with R52H mini-PCI card. All clients CPE will lose connection and signal strengths was gone from -67 to -87 ~ -90. and card TX CCQ down from 100% to 40%-50%. First we think that is Omni antenna or pigtail damage, but we wrong. After few day of analysis problem, ...

anybody help here? it's only my problem, or anybody have this problem with ROS 3.18+ This is known (old) problem. Make sure you use latest routing-test & mpls-test. mmm, I'm not sure I have the same issue, I downgrade to the version 3.17 and all is fine again I made the downgrade through netins...

read my threads. i have the same problem.
http://forum.mikrotik.com/viewtopic.php ... 60&start=0

anybody help here?
it's only my problem, or anybody have this problem with ROS 3.18+

You mean this devices http://www.pcengines.ch/alix3c1.htm if this devices, it's great. you probably use radius authorization and chillyspot on wrt. In mikrotik (ROS) hotspots realy work. and i things tha you need to use not wds, are mesh. alix3c1 have 2 miniPCI. one you can use to hotspot on 2.4 Ghz...

when i add VPLS interface in console show this error message On version MK.3.17 all work fine :shock:, on ver. MK.3.18 and later hang with errors. $ 4 : c79960d0 c700ba7c 00000000 c700ba78 $ 8 : 000005dc c7865048 00000000 05d10000 $12 : 00080014 c700be54 00000000 0000000e $16 : 00000000 00000000 c79...

Hello! Today i am start to testing RB433AH and enabled package mpls. Configure ospf, mplsm and start to add vpls interface, but when i press button "ok" in winbox, nothing change. But the my router is freezing, i reboot router (by power off/on), and start to add vpls interface in console, ...

refresh and see What's new in 3.20: *) added support for IPsec hardware acceleration on RB1000, increases IPsec SHA1-3DES encryption from 45Mbps to 500Mbps and SHA1-AES from 79Mbps to 500Mbps; *) fixed IPv6 on RB1xx and RB5xx; *) added support for ZTE MY 39, CDMA EVDO USB card; *) added clear-df act...

48 volt (POE) will damage RB433AH, or may works? anybody tested?
If MT gives me one RB433AH for free i will test it

I use several Alix 3c1 for HotSpot. Great x86 card, stable (on 3.17 and 3.18). Use it with CM-9 card. I recommend you to use 1Gb CF card, not more. i have some difficult to install MT 3.17 on 4Gb CF Transcent. But soon installed ;). This is good mini x86 cpu. if you dont't like MT, install other x86...

I need to mount RB433AH with 3 miniPCI card at building and I need to use 80m of FTP cable CAT5E (0,51).
what power supply best choice: 24 or 48 volt? and if i plug 48 volt POE i damage RB?

Hello all! I have turn my network on MK above two month ego. Enable OSPF routing and other good future in my wireless network. My costumers need are transparent Ethernet to connect they offices over my network. And i think, that is good to be use MPLS and VPLS application to give this service, but n...