Community discussions

MikroTik App

Search found 196 matches

by aviper
Wed Oct 14, 2020 4:21 pm
Forum: Announcements
Topic: Newsletter 97 (September 2020)
Replies: 87
Views: 38083

Re: Newsletter 97 (September 2020)

Not just a guy, a lot of eastern european countries have apartment building areas in outskirts of cities. Say 20-30 or more such builgings with 7-9 stories each. Small ISP companies drag cable from building to building, put a switch on the roof, then drag ethernets down ventilation shafts or lift s...
by aviper
Wed Oct 14, 2020 4:07 pm
Forum: Announcements
Topic: Newsletter 97 (September 2020)
Replies: 87
Views: 38083

Re: Newsletter 97 (September 2020)

Not just a guy, a lot of eastern european countries have apartment building areas in outskirts of cities. Say 20-30 or more such builgings with 7-9 stories each. Small ISP companies drag cable from building to building, put a switch on the roof, then drag ethernets down ventilation shafts or lift s...
by aviper
Wed Oct 14, 2020 9:59 am
Forum: Announcements
Topic: Newsletter 97 (September 2020)
Replies: 87
Views: 38083

Re: Newsletter 97 (September 2020)

Second it is advertised as GPEN, which should be mostly ISPs area, less Enterprise area and almost none of Home area, but it is not usable for ISPs and Enterprise scenarios. I think they are targeting a different kind of ISP than you have in mind... which more resembles home usage than enterprise u...
by aviper
Tue Oct 13, 2020 10:58 am
Forum: Announcements
Topic: Newsletter 97 (September 2020)
Replies: 87
Views: 38083

Re: Newsletter 97 (September 2020)

We've received one netPower Lite 7R for tests, and I must agree with upper post: * First it comes with SwOS Lite, not SwOS. It comes it 2.12rc2 and has no new update, as all CCS6xx; * Second it is advertised as GPEN, which should be mostly ISPs area, less Enterprise area and almost none of Home area...
by aviper
Sat Oct 10, 2020 4:15 pm
Forum: SwOS
Topic: SwOs - Suggestion for improvements
Replies: 6
Views: 5868

Re: SwOs - Suggestion for improvements

Not sure if this would be a good place to copy the feature requests from CSS6xx thread, beacuse it is SwOS Lite, not SwOS, but if Mikrotik forum administrators think that there should be two different threads they could split them: SwOS Lite feature request: 1) SNMP v2c - with read and write mode 2)...
by aviper
Fri Oct 09, 2020 2:55 pm
Forum: SwOS
Topic: CSS610-8G-2S+IN - SWOS 2.12rc2 Upgrade missing
Replies: 15
Views: 7952

Re: CSS610-8G-2S+IN - SWOS 2.12rc2 Upgrade missing

Same here, currently testing netPower Lite 7R (which should be the same switch in different form factor): - The version of the fw is 2.12rc2 - The snmp is v1 only, and is read-only, for now I cannot make any configuration from the snmp; - When I power-off the unit, and power it on, I'm still logged ...
by aviper
Mon Oct 05, 2020 10:59 am
Forum: Announcements
Topic: Newsletter 97 (September 2020)
Replies: 87
Views: 38083

Re: Newsletter 97 (September 2020)

aviper, we already have that product. note the difference in the name, Lite in this case indicates CCS. here is the CRS version https://mikrotik.com/product/crs318_1fi_15fr_2s_out So we are waiting for netPower 7R/8R and 15R/16R :) I hope you are developing this product line. Up until then we are g...
by aviper
Tue Sep 29, 2020 5:57 pm
Forum: Announcements
Topic: Newsletter 97 (September 2020)
Replies: 87
Views: 38083

Re: Newsletter 97 (September 2020)

aviper, we already have that product. note the difference in the name, Lite in this case indicates CCS. here is the CRS version https://mikrotik.com/product/crs318_1fi_15fr_2s_out I'm familiar with CRS318, but it is with 10/100 on the client side (reverse Poe). Are you planning CRS3xx with 10/100/1...
by aviper
Tue Sep 29, 2020 2:48 pm
Forum: Announcements
Topic: Newsletter 97 (September 2020)
Replies: 87
Views: 38083

Re: Newsletter 97 (September 2020)

Why netPower Lite 7R is CSS and not CRS? We would like to install equipment for customers with better management, it is perfect as form factor, size and ports and price for FTTB scenarios, but we would not install equipment that is not at least L2 manageable (snmp: metrics, disable/enable of port, s...
by aviper
Wed Jul 08, 2020 3:59 pm
Forum: Announcements
Topic: v6.47 [stable] is released!
Replies: 348
Views: 171957

Re: v6.47 [stable] is released!

RouterOS version 6.47 has been released in public "stable" channel! ... *) wireless - fixed Nstreme wireless protocol performance decrease; ... Does anybody knows when this decrease was introduced? We have two links with 6.45.9, 802.11ac, dual chain, -48, 20/40/80, CCQ around 100% and we ...
by aviper
Mon Dec 09, 2019 10:02 pm
Forum: Wireless Networking
Topic: Bridge port received packet with own address as source, probably loop
Replies: 54
Views: 124224

Re: Bridge port received packet with own address as source, probably loop

I've resolve the issue.
My configuration consist of three routers, one is capsman, two of them are used for caps. On one of the caps the bridge mac was inherit from the wlan1 and the capsman uses the same mac address on his virtual cap interface.
I've change the bridge mac with the ether1's mac.
by aviper
Sun Mar 03, 2019 10:53 am
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96533

Re: v6.44 [stable] is released!

Update from 6.40.8 to 6.44 seems to remove "system note" content.

Resolve: My mistake, I was removing all file, just to make space and be sure, that nothing is left in there. And I've removed the sys-note file.
by aviper
Wed Aug 30, 2017 11:34 am
Forum: General
Topic: ARP Timeout
Replies: 19
Views: 25310

Re: ARP Timeout

Nobody is arguing that this should be the normal behaviour of a router: - Try to connect with IP of an unexisting device - ARP should be populated with 00s mac - Connect a device with this IP address - on the first packet the Mikrotik hears a packet with src mac the mac (for this example: 11:11:11:1...
by aviper
Wed Aug 30, 2017 1:09 am
Forum: General
Topic: ARP Timeout
Replies: 19
Views: 25310

Re: ARP Timeout

Our problem was a little different, we had the wrong MAC, not only 00s. So to my understanding (without actual test with wireshark) - the Client was sending packet to the Gateway, but the Gateway send back answer with the wrong MAC. The proper behavior should be to send back packet with dst mac, the...
by aviper
Tue Aug 29, 2017 11:25 pm
Forum: General
Topic: ARP Timeout
Replies: 19
Views: 25310

Re: ARP Timeout

We had similar problem today. RB3011 with 6.39.1. A Laptop connects to APs, and get 172.16.1.19 or 172.16.1.20 from the DHCP server. The client had arping to 172.16.0.1, but didn't have ping, and the Mikrotik had also arping to the client with no ping (firewalls were down). At that moment I saw that...
by aviper
Sun Jun 18, 2017 10:40 am
Forum: Announcements
Topic: v6.39.2 [current]
Replies: 122
Views: 57620

Re: v6.39.2 [current]

I have a question with respect the release numbering:

Why 6.37.x is Bugfix and 6.39.x is current.
Where are the 6.38.x releases? I think all the 6.38.x must be Bugfix if my logic is right.
by aviper
Tue Sep 20, 2016 10:30 pm
Forum: General
Topic: GPON ONU module no details
Replies: 9
Views: 4046

Re: GPON ONU module no details

My GPON ONU works well, but also show no details in CRS125. Do you have someone working GPON SFP with details about SFP module? Thanks I'm sorry I've no answer, but I have a question :-D ..what do you have/use on the other side (olt)? https://www.raisecom.com/product/standalone-gpon-olt Not sure ab...
by aviper
Wed Apr 08, 2009 12:43 pm
Forum: The Dude
Topic: Dude lost maps
Replies: 2
Views: 1248

Dude lost maps

Hello, I'm using dude for a long time and from update to 3.0 I have one nasty bug. Once in a while one map turn into white sheet. When I click properties the background file is there in device list, the device are there, but dude just don't want to visualize my map. I redraw the map and delete the b...
by aviper
Wed Jan 21, 2009 12:14 pm
Forum: The Dude
Topic: Dude on RB, cannot upload backup file
Replies: 5
Views: 2644

Re: Dude on RB, cannot upload backup file

Ok, i downgraded. Dude to 3.0. But I don't think it uses external storage. When I try to upload the backup image, i get error, not enough free space. Even with external store disk set to dude (I think the option is available, only because, I had dude 3.1 on this RB :).
by aviper
Wed Jan 21, 2009 12:02 pm
Forum: The Dude
Topic: Dude on RB, cannot upload backup file
Replies: 5
Views: 2644

Re: Dude on RB, cannot upload backup file

Yeap,
dude 3.1
ROS 3.18.
Newly installed.

Is there a way to downgrade to 3.0 ? For testing purpose ?
by aviper
Wed Jan 21, 2009 11:39 am
Forum: The Dude
Topic: Dude on RB, cannot upload backup file
Replies: 5
Views: 2644

Dude on RB, cannot upload backup file

Hello, I'm trying to migrate from win-x86 to RB-600. 1.I backup my win dude configuration, and i've got 70 mb file (it is really big network). 2. I add 1 GB CF to RB600. Update to 3.18 MT. Use /store to format the card. "Install" dude pkg. Point CF1 for using with dude. Status active. 3. L...
by aviper
Fri Jun 22, 2007 10:01 am
Forum: The Dude
Topic: Is your link color wrong for VLAN/Ethernet? link speed HOWTO
Replies: 2
Views: 1899

Re: Is your link color wrong for VLAN/Ethernet? link speed HOWTO

What about, full duplex and half duplex?

I have bonding link that get exactly 100 mbit hdx !
Should I set it as 100 mbit fast ethernet? :)
by aviper
Thu May 24, 2007 12:24 pm
Forum: The Dude
Topic: Big Problem V3beta6 Stops Pinging
Replies: 16
Views: 4713

Same here,
even when ping the host within dude it says Pingtimeout, meanwhile from cmd console ping is perfect.
by aviper
Mon Mar 26, 2007 12:34 am
Forum: General
Topic: Mikrotik on Intel boards
Replies: 6
Views: 2608

see in the bios for booting sequence ...
btw use pata
by aviper
Fri Feb 02, 2007 9:05 am
Forum: The Dude
Topic: Errors in Dude 3.0 Beta 1
Replies: 6
Views: 3112

Re: UPGRADE

:( Tried twice to upgrade from a 2.0 system. No Joy. Had to uninstall before installing 3.0.
Try frist 2.1 and after that 3.0b1.

In my case I installed it over v2b12 and it works (everything was loaded), but it seems lot of buggy for me so I change back to v2.1
by aviper
Thu Feb 01, 2007 9:34 am
Forum: The Dude
Topic: Errors in Dude 3.0 Beta 1
Replies: 6
Views: 3112

After update from v2b12. 1. Dude shows me everything as down (even if I have ping to the devices). 2. I don't have snmp probes to ROS devices (I think it is connected with the ping problem above). 3. The wallpaper turns white when I zoom. 4. For now - unusable. Back to v2.1 hopefully everything seem...
by aviper
Tue Jan 23, 2007 11:07 pm
Forum: Wireless Networking
Topic: Which 400mW is best - Atheros or Senao?
Replies: 14
Views: 3627

I prefer Tonze 684HG and CM9 depends on the case.

P.S. Mostly on Price and the Maxim: I don't want to s**t o*f the ether.
by aviper
Tue Jan 23, 2007 9:52 am
Forum: Wireless Networking
Topic: Which 400mW is best - Atheros or Senao?
Replies: 14
Views: 3627

nmp-8602 is Atheros based too

SR2 is only b/g.

I would prefer SR2 between those 2, but I would prefer another card if i had choice.
by aviper
Wed Jan 17, 2007 9:04 am
Forum: Wireless Networking
Topic: Nstreme deregisters every minute or so
Replies: 2
Views: 1253

Just guessing: maybe you don't have enough power and the wi-fi (nstream is very cpu intensive and it rise the power consumation little) card drops try with lower power consuming card.
And the other guess is that RB isn't stable at such high rate of clock. Downclock it for test !
by aviper
Mon Dec 04, 2006 8:54 am
Forum: Wireless Networking
Topic: VLAN Problem
Replies: 1
Views: 1256

Easiest way wds-bridge everything from A to C. And let cisco do the Vlan stuff.

Hardest (I haven't test something like this). Make vlans on MT slaves of the Wi-fi cards and put 3 IPs per Interface (1 for every vlan) :).
by aviper
Mon Dec 04, 2006 8:22 am
Forum: General
Topic: nstereme
Replies: 4
Views: 2732

It is possible in ver 2.9.x.
by aviper
Fri Dec 01, 2006 1:28 am
Forum: The Dude
Topic: Feature Request (schedule of probes)
Replies: 2
Views: 2213

Feature Request (schedule of probes)

I have some machines that are online by schedule - start at 10:00 shutdown at 16:30 for example. I want to be able to set this to the probes. Soo after end time I don't want to see Red Status (status set to unknown). The request is. I need to have machine that aren't neccesery online all the time, i...
by aviper
Fri Nov 10, 2006 10:28 pm
Forum: Wireless Networking
Topic: 240Km link with RB532 @ 20Mbits
Replies: 62
Views: 45885

DAAAAMN GOOOD WORK :).
by aviper
Fri Nov 10, 2006 9:06 am
Forum: Wireless Networking
Topic: 240km link , any suggestions?
Replies: 64
Views: 17424

i don't have them ... i'm calcultating on-the-fly ;-) The horizont is eating the fresnel. You should look for higher point. If you want more than 100+ km link. In Greece we have a very strange phenomenon. We have a link from Rafina (a small city/suberb east of Athens) to Island of Mykonos. Accordin...
by aviper
Fri Nov 10, 2006 9:02 am
Forum: Wireless Networking
Topic: Bonded NStreme vs. NStreme2
Replies: 15
Views: 4197

Dual nstream is more "driver related". I had problem with dual nstreaming SR5 and 684HA cards (SR5,HA from one side, and SR5, HA from the other, I didn't have more cards to use 4 equal cards in both PCs :/). Soo I choose bonding 2 nstreams. Problem with the bonding is that one link can get...
by aviper
Mon Nov 06, 2006 10:14 pm
Forum: General
Topic: RouterOS v3.0beta2
Replies: 57
Views: 19271

off topic - is the changelog good this time? Yes! This is the kind of detail I think a lot of people would appreciate, including myself. Thanks for listening :) Looking forward to trying Beta3. *) wireless - added station-pseudobridge modes to do MAC NAT when bridging over station mode link; I'm gl...
by aviper
Wed Nov 01, 2006 9:32 am
Forum: General
Topic: RouterOS v3.0beta2
Replies: 57
Views: 19271

*) wireless - added station-pseudobridge modes to do MAC NAT when
bridging over station mode link;
I'm against this !!!

I think that too many newbies will use it, and I don't think it is stable enough for usage. Except if MT doesn't do some magic out there :).
by aviper
Sun Oct 29, 2006 10:31 pm
Forum: Wireless Networking
Topic: lost connection, got deauth (urgent help)
Replies: 15
Views: 7799

Did you try to "re-set" it to default ... I know is on default. Just set it again via telnet, ssh or new terminal (in winbox).
by aviper
Fri Oct 27, 2006 10:13 am
Forum: Wireless Networking
Topic: lost connection, got deauth (urgent help)
Replies: 15
Views: 7799

Try reset security-profile to default ...
by aviper
Tue Oct 24, 2006 2:30 pm
Forum: Wireless Networking
Topic: 93km link
Replies: 24
Views: 7468

I'm buing anntenas from Peshtera, and feedhorns from Sofiq ;).
And once upon a Time, I produce feedhorns for Plovdiv, but they were not really good models :).
Btw I think 1,2m dishes are better than the 1,4m models :).
by aviper
Sat Oct 21, 2006 10:14 am
Forum: Wireless Networking
Topic: idiot's guide to which frequency is in use?
Replies: 6
Views: 2255

The AP freq is in use. The Station/Station-wds scan-freq is in use. If you have AP freq=5200 and Station scan-freq=5100,5205 The won't connect. If you have AP freq=5100 station scan-freq=5100,5000,5005,5010,5015,5210,5215,5220 They will connect as the station will search for all this freq and find t...
by aviper
Sat Oct 21, 2006 10:03 am
Forum: Wireless Networking
Topic: What do I need to get a 40-60Mbps PtoP link going?
Replies: 9
Views: 4558

Update: same system dual feeds: received-packets-per-second: 9238 received-bits-per-second: 47.0Mbps sent-packets-per-second: 8800 sent-bits-per-second: 44.8Mbps The dual isn't the best: wifi1: signal-strength: -72dBm tx-signal-strength: -72dBm noise-floor: -99dBm signal-to-noise: 27dB wifi2: signal...
by aviper
Fri Oct 20, 2006 9:15 am
Forum: Wireless Networking
Topic: 93km link
Replies: 24
Views: 7468

Full duplex you mean 2x30 mbit, and maybe 1x60 in one direction!
Right ?
by aviper
Thu Oct 19, 2006 12:00 am
Forum: Wireless Networking
Topic: Problem with mikrotik configuration, help...
Replies: 6
Views: 2210

Use station-wds, you cannot bridge station mode.
And then the ap-bidge should not be in the bridge1, but use wds-default-bridge=bridge1 and wds-mode=dynamic.

http://wiki.mikrotik.com/wiki/Transpare ... o_Networks
by aviper
Sat Oct 07, 2006 6:15 pm
Forum: General
Topic: Winbox Enhancement
Replies: 13
Views: 5543

I normally use putty, but I will rephrase my comment. For those who are gui orientated, it might be nice if they could put the port they wish to connect to in the ssh option in winbox
If they are GUI oriented, why do they need SSH ? :)
Just open New Terminal and SSH from there!
by aviper
Sat Oct 07, 2006 2:20 pm
Forum: General
Topic: Winbox Enhancement
Replies: 13
Views: 5543

Just open New Terminal ...
by aviper
Fri Oct 06, 2006 2:48 am
Forum: Wireless Networking
Topic: Laptop based clients Can not connect, but can to linksys
Replies: 8
Views: 2238

Try here:
http://support.intel.com/support/wirele ... 010623.htm
Read here:
http://support.microsoft.com/kb/821442

P.S. Because 2.9.3 != 2.9.30.

P.P.S. This is another very discused theme:
http://support.intel.com/support/wirele ... 006205.htm
But I think that this is your case.
by aviper
Thu Oct 05, 2006 10:18 am
Forum: Wireless Networking
Topic: Laptop based clients Can not connect, but can to linksys
Replies: 8
Views: 2238

2.9.3 or 2.9.30 ? And is the laptop Centrino with Intel wi-fi card. There are lot of complaining about them, just install them latest driver from the Intels site. The complaining is Intel wi-fi vs. Athers AP with recently new drivers and capabilities, and there is proof that the problem is with inte...
by aviper
Sat Sep 23, 2006 7:09 pm
Forum: Wireless Networking
Topic: Support for 802.11n
Replies: 13
Views: 3802

We still expect the differences to be resolved in time for a second draft to be completed this November with a letter ballot going out in January of 2007. If this is approved we can expect final ratification in late 2007. If it is not approved we estimate there will be a Draft 3.0 in the spring wit...
by aviper
Fri Sep 22, 2006 10:20 am
Forum: Wireless Networking
Topic: 18km link CM9 ws SR5, 40Mbit, but some packet loss.
Replies: 23
Views: 5939

Then get dedicated machine for the wireless link.
MT is good router
MT is good AP
MT is good CPE
But things get worst, when you use it for everything !

?
/system resources print
?
/system resources irq print
by aviper
Sun Sep 17, 2006 12:48 am
Forum: Wireless Networking
Topic: WDS bridging: STP vs RSTP
Replies: 5
Views: 4833

Re: WDS bridging: STP vs RSTP

I often see my bridge collapsing and rebuilding (very difficult to debug). Maybe you have low signal levels. When the wireless disconnects from the AP your bridge is rebuilding itself. I think you should "repair" your wirelesses instead searching for fast "rebuilding" of the bri...
by aviper
Sat Sep 16, 2006 10:03 am
Forum: General
Topic: bridging vlan tagged traffic
Replies: 1
Views: 1562

I had simular problem it turn out to be port based vlan switch (I use him to separate radios). In many other cases I don't have problem bridging vlan tagged trafic over wds bridges, eoip bridges, bonding+eoip bridges ... In one case I had problem (seems like MTU problem), but I updated the MT with h...
by aviper
Thu Sep 14, 2006 10:26 pm
Forum: Wireless Networking
Topic: newb configuring RB112 and RB132 for simple bridging
Replies: 8
Views: 2051

The first thing that come on my mind is that your anntenas are deisgned for 2,4 GHz !
by aviper
Thu Sep 14, 2006 10:08 pm
Forum: Wireless Networking
Topic: 15 km link, RB112+CM9+grid 27db 5GHz = 5 Mbita, Possible?
Replies: 1
Views: 1142

yes ...
by aviper
Wed Sep 13, 2006 10:17 pm
Forum: Wireless Networking
Topic: newb configuring RB112 and RB132 for simple bridging
Replies: 8
Views: 2051

What is the signal you are seeing on the CPE side? How far away is the CPE, and what gain antenna are you using on it? As for the bridged CPE, this can only be done when using WDS and the CPE in station-wds mode. Search around a little for this if you need examples as it has been discussed a lot. I...
by aviper
Wed Sep 13, 2006 8:54 pm
Forum: The Dude
Topic: Printing Down Machine List
Replies: 3
Views: 2320

@ Network Maps.
You can filter to show you up/down/partitial maps status. And you can see ot which map which device is down.
by aviper
Tue Sep 12, 2006 11:43 pm
Forum: Wireless Networking
Topic: 240km link , any suggestions?
Replies: 64
Views: 17424

Any news abotu the project? I'm also interested of establishing a link of about 100Km (I have to link two sites that are 600 Km apart, so I'm thinking about making 6 repetitions). I think I can learn a lot from the project discussed here.

Greetings from Brazil!
Pfew, your project is easy ;).
by aviper
Mon Sep 11, 2006 3:53 pm
Forum: The Dude
Topic: Tools Feature Enhancement
Replies: 3
Views: 2592

I've start putty from Start -> Run too, so I put it in path folder. I made my own path folder at make shortucuts there it contains Putty, netscan, ethreal and etc. And I run all this apps throw run. I just think it isn't this the right forum to explain where should something go. I post it as example.
by aviper
Sun Sep 10, 2006 11:13 pm
Forum: General
Topic: APC UPS Reboot Command
Replies: 13
Views: 14464

I use rebooter that is atached to Parallel port of the PC. But I can use it only with linux and windows :/. MT cannot control the LPT port.
by aviper
Sun Sep 10, 2006 11:09 pm
Forum: Wireless Networking
Topic: 240km link , any suggestions?
Replies: 64
Views: 17424

Radio Mobile can ...
by aviper
Sat Sep 09, 2006 3:09 pm
Forum: Wireless Networking
Topic: 2.4 GHz/AMP 400mw
Replies: 12
Views: 2691

both applies for here - Bulgaria ! :}

I only had once problem with one building but they catch me with the dynamite ... :)
by aviper
Sat Sep 09, 2006 12:11 pm
Forum: The Dude
Topic: Tools Feature Enhancement
Replies: 3
Views: 2592

Yes you can add.

Go to putty homepage. Download putty save it in directory which has path in windows (c:\winhome\system32\ for example).

Go To tools -> add -> Name: putty ->
command: putty [Device.FirstAddress]

Voala ...
P.S. You can use plink instead of putty, but I found it bug-gy ...
by aviper
Fri Sep 08, 2006 9:59 am
Forum: Wireless Networking
Topic: Bonding problems
Replies: 0
Views: 987

Bonding problems

Hello, I have complicate network problem: Linux1-MT1 EOIP3(Bond-EOIP1 (SR5~SR5) EOIP1 - Bond)EOIP3 -MT1-Linux2 ###############\EOIP2 (HA-~-HA) EOIP2/ - Linux 1 and Linux has eth int. with vlans and comunicating one to another the problem is that I have good download at Linux 2, but I've got problem ...
by aviper
Thu Aug 31, 2006 11:05 pm
Forum: The Dude
Topic: SQL db
Replies: 1
Views: 1996

SQL db

Inspired by the SQL icon thread:

Can we connect The Dude to external DB like MySQL ?
I think then only the imagination will be a barier to The Dude oportunities.
by aviper
Thu Aug 31, 2006 11:02 pm
Forum: The Dude
Topic: RSS
Replies: 6
Views: 4377

OMFG :)
I thought about RSS client in The Dude :}.

P.S. Just imagine reading news while monitoring the system ;).
by aviper
Wed Aug 30, 2006 8:28 pm
Forum: The Dude
Topic: RSS
Replies: 6
Views: 4377

Why ?
:shock:
by aviper
Tue Aug 29, 2006 11:07 am
Forum: RouterBOARD hardware
Topic: RB14 + 2511 issues
Replies: 4
Views: 2854

Are there any other devices on th same PCi bus that want 3.3V ? Try only to stay with the RB + 5V cards on the bus and I think it will work (not sure for that ...)
by aviper
Tue Aug 29, 2006 11:06 am
Forum: RouterBOARD hardware
Topic: Routerboard 112
Replies: 3
Views: 2443

Try netinstall ...
by aviper
Tue Aug 29, 2006 11:04 am
Forum: Wireless Networking
Topic: IP Conflicts - just started after 1 year
Replies: 6
Views: 1842

Some kid is playing around :}.

You can see in clients logs which Mac address did the Ip Conflict.
by aviper
Sat Aug 19, 2006 11:32 am
Forum: General
Topic: List your 5 favorite RouterOS Features
Replies: 9
Views: 2744

+ 1. Wireless speeds (nstream/dual nstream) 2. Wireless stability (nstream + spec. drivers) 3. MT attitude to their customers (they are listening us !), so I can count on this platform. 4. Trouble tickets decreased, so now we can handle more customers with less staff 5. I'm god in my friends eyes fo...
by aviper
Fri Aug 18, 2006 9:38 pm
Forum: Wireless Networking
Topic: 33mbit Over 29KM @ 5.8ghz!
Replies: 26
Views: 5117

Generator can be refilled ;).
by aviper
Tue Aug 15, 2006 5:39 pm
Forum: The Dude
Topic: Little Bug with fast entering new device.
Replies: 7
Views: 3526

When you change the color of smthing. You can add 16 custom colors. When I add color the device get colored. But when I enter again on the same or other device appearance the new color is no longer available. And 16 colors are black again (like default ...).
by aviper
Sun Aug 13, 2006 11:33 pm
Forum: Wireless Networking
Topic: NStreme question
Replies: 11
Views: 2546

and without nstreme and with g-turbo 32 mbps... :shock:
Short of CPU power i think ...
by aviper
Sun Aug 13, 2006 5:01 pm
Forum: Wireless Networking
Topic: Routed 18mbps VS. Bridged 13mbps
Replies: 19
Views: 4898

how is the signal ?
Try without nstream ...
Did you enable polling?
Are there any other devices on the same freq?
Close freq?
SNR ?
Noise?

And more info will be helpfull ...
by aviper
Sat Aug 12, 2006 10:10 am
Forum: The Dude
Topic: Little Bug with fast entering new device.
Replies: 7
Views: 3526

Ok ... I added 200 devices yesterday before gone to sleep ... Leave the backup for today ... cause I sleep only 5-6 hours who knows what can happend for 5-6 hours ... Wake up this morning by the ups system power went down. Gone to the terminal and ... Clear Dude like new ... no sign of the 200 devic...
by aviper
Fri Aug 11, 2006 11:56 pm
Forum: The Dude
Topic: Little Bug with fast entering new device.
Replies: 7
Views: 3526

Same scene:

Cannot save custom colors from the client ... :)

P.S. This is my night :).

v2 b5 still no change
by aviper
Fri Aug 11, 2006 11:14 pm
Forum: The Dude
Topic: Little Bug with fast entering new device.
Replies: 7
Views: 3526

Same scene: When changing the color of link or device UP/DOWN/Unknown color and press OK, I loose the program it sends me to other running program, without hanging out. Edit1: Changing back to default doesn't "throw" me out. Edit2: Link -> Settings -> Dots (for new types) -> esc -> ok - Th...
by aviper
Fri Aug 11, 2006 11:11 pm
Forum: The Dude
Topic: Little Bug with fast entering new device.
Replies: 7
Views: 3526

Same scene:

Cannot Export the config from the client. Just hangs out.

v2 b5 - done ...
by aviper
Fri Aug 11, 2006 8:41 pm
Forum: The Dude
Topic: Little Bug with fast entering new device.
Replies: 7
Views: 3526

Little Bug with fast entering new device.

The scene: The Dude v 1.2 Remote Server I'm on client PC. When I add device, I write the host/ip/name and fast click enter twice this leads to: ASSERT handle failed in vurtual LRESULT Windows::sendMessage(UINT, WPARAM, LPARAM) at base/window.cpp:280. If I hit enter once and wait for the Finish butto...
by aviper
Fri Aug 11, 2006 8:00 pm
Forum: The Dude
Topic: SMTP require IP, I want to enter host.
Replies: 3
Views: 2764

10x ahead.
My GSM provider cannot give me the IP of his SMTP for mail2sms, only the host :).
by aviper
Fri Aug 11, 2006 7:39 pm
Forum: Wireless Networking
Topic: [solved] what to do!? Routing question
Replies: 14
Views: 3376

As I understand
you want to connect 3 lans together?
You have 3 APs in each lan and they see one point, where you want to have MT ?
Am I write?
by aviper
Thu Aug 10, 2006 10:31 pm
Forum: The Dude
Topic: SMTP require IP, I want to enter host.
Replies: 3
Views: 2764

SMTP require IP, I want to enter host.

SMTP box in confs. requires IP, I need to enter host there ... :/.
I tought I wrote for this request. Is there plan for making this possible.
by aviper
Thu Aug 10, 2006 9:34 pm
Forum: Wireless Networking
Topic: [solved] what to do!? Routing question
Replies: 14
Views: 3376

And I suppose, that you don't know what you want. And how to explain it !
by aviper
Sun Aug 06, 2006 5:31 pm
Forum: Wireless Networking
Topic: up-load speeds gone to nothing.
Replies: 9
Views: 2215

Every lighting arrestor can take some limit of voltage/strikes/time of striking ...
I would first change them, before, cards, software and cables ...
by aviper
Sun Aug 06, 2006 5:27 pm
Forum: Wireless Networking
Topic: Nstream and Security
Replies: 1
Views: 1027

If you don't, any other MT could connect ...
by aviper
Fri Jul 21, 2006 10:41 am
Forum: Wireless Networking
Topic: Still confused about power output on SR-2 and SR-5 cards
Replies: 22
Views: 4810

Jokingly: Send it to my e-mail ;).

I'm not very good and PtMP wireless-es, but try to set periodic Calibration to Disable (by default it is set to default). I don't know anything else that could help you.
by aviper
Fri Jul 21, 2006 10:37 am
Forum: Wireless Networking
Topic: pci to 4 minipci is it worth
Replies: 10
Views: 3080

Re: Depends on what MiniPCI cards you are using.

We use the PCI to MiniPCI 4 slot adapters all the time. One thing you have to watch out for though is how many watts of power do your mini cards use... A PCI bus only has 25 watts to go around for everything using it. The ubiquiti SR2 and SR5 cards use about 5 watts each. After i had problems with ...
by aviper
Fri Jul 21, 2006 10:23 am
Forum: Wireless Networking
Topic: Still confused about power output on SR-2 and SR-5 cards
Replies: 22
Views: 4810

Hellbound,
what version of MT you use ?
by aviper
Tue Jul 11, 2006 9:00 am
Forum: General
Topic: Support for Xscale intel processor
Replies: 17
Views: 7437

6 meters pole with P4 on the top ;).
I'm not going to take pictures, I don't want to scare you :).
by aviper
Mon Jul 10, 2006 10:36 am
Forum: The Dude
Topic: Dude? Wheres my network!
Replies: 2
Views: 2251

I think it has a feature to update manually - but your case is very interesting :).

*Wrotes down the link to the mysticism Bookmarks*
by aviper
Sat Jul 01, 2006 10:01 pm
Forum: Wireless Networking
Topic: What do I need to get a 40-60Mbps PtoP link going?
Replies: 9
Views: 4558

received-packets-per-second: 4212
received-bits-per-second: 32.9Mbps
sent-packets-per-second: 3972
sent-bits-per-second: 33.1Mbps

Real traffic on max. T-bird 1,4 and Celeron 1,6 @ 30 % CPU. WDS bridged, nstream; -60 dBm Tx Strength; 10 kms.
by aviper
Wed May 31, 2006 12:02 pm
Forum: The Dude
Topic: How about an official feature request thread?
Replies: 20
Views: 7413

Still I need to be able to write smtp server by hostname, not only IP. :)
by aviper
Thu May 18, 2006 1:40 am
Forum: General
Topic: Mikrotik Chat
Replies: 37
Views: 10966

Access denied!
:)
by aviper
Wed May 03, 2006 2:56 am
Forum: The Dude
Topic: SMTP by DNS
Replies: 0
Views: 1470

SMTP by DNS

Hello,
My Dude doesnt accept smtp server by hostname, only IPs. Can we change this?
by aviper
Wed Apr 26, 2006 5:55 am
Forum: The Dude
Topic: Dude inLinux?
Replies: 18
Views: 9232

The dude (beta testing) packge for the RouterOS x86 will be ready in few weeks.
I'm gona name a peak - "Mikrotik". The only problem is that ppl should select me as a president next mandate. :)
by aviper
Mon Apr 24, 2006 9:14 pm
Forum: The Dude
Topic: Dude inLinux?
Replies: 18
Views: 9232

My post was for Dude programmers. Sorry for the misunderstanding :). It would be great to see Dude Server as package for MT.
by aviper
Mon Apr 24, 2006 7:52 pm
Forum: The Dude
Topic: Dude inLinux?
Replies: 18
Views: 9232

Why don't you make dude server Mikrotik package? It would be great. When you install MT you will have - router, wireless, monitoring, User Managment and etc. I will marry to this system :).
by aviper
Fri Apr 21, 2006 11:36 pm
Forum: General
Topic: Satellite downlink and DSL uplink.
Replies: 1
Views: 1461

Satellite downlink and DSL uplink.

Ok guys, I need a shoulder. I've got this picture: DSL - Windows Machine - MT - LAN On Windows Machine, there is DVB card and DSL is atached to eth1. DSL is connecting throw PPPoE. I cannot setup the MT i do: 1. Setup IPs (doesn't matter here). 2. Setup DHCP (doesn't matter here). 3. I setup deafult...
by aviper
Tue Apr 18, 2006 2:05 pm
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 42839

/me queue up :)

aviper (at) mail (dot) bg
by aviper
Tue Apr 18, 2006 2:02 pm
Forum: General
Topic: Ubiquiti SR9 support
Replies: 49
Views: 25397

ok in case of blocked fesantal zone 50% only
You've got the answer in the upper post.

Just buy equipment and test ... Nobody can say for sure.
by aviper
Thu Apr 13, 2006 1:41 pm
Forum: General
Topic: High Performance ATX Motherboard to Counter CPU Load
Replies: 9
Views: 2464

I'm pushing about 120 mbits throw 4 atheros mPCIs and one Intel gbit nic.
With Socket A AMD Athlon @ 1.5 Ghz and 256 ram kt333 chipset and everything disabled in the bios.

There is IRQ conflict between two cards.
by aviper
Thu Apr 13, 2006 1:33 pm
Forum: General
Topic: Vlan problem or ... ?
Replies: 5
Views: 1664

1st question: Yes. 2nd question: Bridge is working perfectly without vlans. The conf is: MT1: Bridge Port - eth1 and wlan1 (station-wds mode).; MT2: Bridge port - eth1 and wds1 (ap-bridge mode of the vlan with wds-default-bridge...). I think it is probably the NIC driver. I've got simular problem wi...
by aviper
Wed Apr 12, 2006 10:43 pm
Forum: General
Topic: Vlan problem or ... ?
Replies: 5
Views: 1664

Vlan problem or ... ?

Hello, I need little help. I've got this problem LinuxA --- MT1 ~~~~ MT2 ---LinuxB There are normal switches between linuxes and MTs. And wireless between MTs. LinuxA has: 10.0.0.1 on vlan1 10.0.1.1 on vlan2 and 10.0.2.1 on vlan3 LinuxB has: 10.0.0.2 on vlan2 10.0.1.2 on vlan2 and 10.0.2.2 on vlan3 ...
by aviper
Wed Apr 12, 2006 6:58 pm
Forum: General
Topic: PCI Express cards ???
Replies: 24
Views: 4689

Correct, in this case the Intel PCI-E nics use chips that are not on the MT list (82573 and other PCI-e versions). They specifically said the 'older' unified driver does not cover the new pci-e based chips, ie 82573. A 'new' unified driver has been released to include these new chips. So, you are r...
by aviper
Wed Apr 05, 2006 8:35 am
Forum: Wireless Networking
Topic: RouterBOARD 112 Wireless Performance test
Replies: 9
Views: 6083

I wanted to say that there where 532a tests around, but I lost the link.

P.S. Can you share the confs, soo if we make tests they will be comparealbe.

P.P.S. I found it: http://www.mikrotik.com/Documentation/wireless_test.pdf , but the test is with 2.9rc7 :).
by aviper
Wed Mar 29, 2006 1:57 pm
Forum: General
Topic: What is you CPU load??
Replies: 11
Views: 2532

This is from one of my customers;

single Xeon 2.6 ghz (512kb cache)
on average 730 users
firewall, shaping (for all)
averages 40% cpu load
741 users connected when i looked at the cpu graph
How-much traffic ?
by aviper
Tue Mar 28, 2006 3:40 pm
Forum: Wireless Networking
Topic: RouterBOARD 112 Wireless Performance test
Replies: 9
Views: 6083

Could you post the link to the old 532 test? I can't find it.
by aviper
Thu Mar 23, 2006 9:15 pm
Forum: The Dude
Topic: Feature Request: Link line thickness to show snmp data
Replies: 3
Views: 2637

I searched in settings - sorry my fault ...
by aviper
Thu Mar 23, 2006 9:46 am
Forum: The Dude
Topic: Feature Request: Link line thickness to show snmp data
Replies: 3
Views: 2637

I'll use the topic. I want a color links. I want to visualize PoE branchs with them.
by aviper
Wed Mar 22, 2006 5:40 pm
Forum: The Dude
Topic: Bug ?
Replies: 2
Views: 1916

Why don't you unlock the them with the Changelog (sticky one), to post bugs there. After the new release, you make new theme, and leave behind only the posts of bug that hasn't been removed. Bug2: I have problem with big pictures for background of maps (I use scanned maps - black and white jpeg). Ca...
by aviper
Tue Mar 21, 2006 5:51 pm
Forum: The Dude
Topic: Bug ?
Replies: 2
Views: 1916

Bug ?

Little bug:

Renaming device throw web interface leads to reverse IP address :).
by aviper
Tue Mar 21, 2006 9:36 am
Forum: RouterBOARD hardware
Topic: nO ROUTER boards in USA
Replies: 4
Views: 2398

Re: nO ROUTER boards in USA

hi, i´m at Colombia, and i have to buy mi wireless in USA but i had have to install Mikrotik in Wrap because none of dealers in USA have routerboards in stock . Any sugestion? if i order routerboards from latvia , howmany time will take to arrive at miami? Thanks Ask sales@mikrotik.com P.S. We are ...
by aviper
Mon Mar 20, 2006 10:52 am
Forum: General
Topic: Attention v2.9.16 users!
Replies: 11
Views: 3340

Tip: The topic is: Attention v2.9.16 users! ...
by aviper
Mon Mar 20, 2006 12:12 am
Forum: The Dude
Topic: Questions Request and ...
Replies: 0
Views: 1608

Questions Request and ...

I download the latest version of The Dude (Last Time I test it ver. was around beta 5). First I want to salute you for the good work on the project and make some feature questions/requests/advices ... 1. I wrote my notes on cyrilic (Windows 1251 encoding). I see them well in the windows interface, b...
by aviper
Wed Mar 08, 2006 3:57 pm
Forum: RouterBOARD hardware
Topic: Mikrotik and Motorola XPC processor?
Replies: 1
Views: 1655

nope.

Routerboards, Warps and x86 ...

P.S. Dobre doshyl
by aviper
Mon Mar 06, 2006 10:20 am
Forum: Wireless Networking
Topic: whats the max thruput of a RB532
Replies: 4
Views: 1935

I've achive 35 mbits half duplex ... I think it could do more with very fine tunes ...
by aviper
Fri Mar 03, 2006 1:09 am
Forum: Wireless Networking
Topic: Is any one running 2x SR5's and 2x CM9s in an RB500?
Replies: 4
Views: 1683

Joke: Think about volt mod :).

P.S. There is drop of truth in every joke ;).
by aviper
Mon Feb 27, 2006 9:20 am
Forum: Wireless Networking
Topic: 2.9.13 good wireless results
Replies: 11
Views: 4045

Joke: That is bad news ... Now I should upgrade my main wirelesses to the new version :twisted: :evil:. And I should choose I night without sleeping ;). End Of Joke Congratulations to MT for the good update. Keep up the good working !:) Will there be problem with upgrading first "the core"...
by aviper
Sat Feb 25, 2006 11:48 am
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 328
Views: 96087

1) I'm not quete sure how good is OLSR (i've just start reading the papers) ... but it sound good enough ... :)
2) Antena divercity, soo we can use it for inside Wi-Fi Lans (MIMO should be part of 802.11n, soo we can wait for compatible "end-use" devices :) )
by aviper
Fri Feb 24, 2006 6:23 pm
Forum: Wireless Networking
Topic: Book on Wireless Networking
Replies: 4
Views: 1890

Very good ...
I recommend double reading ! :)
by aviper
Fri Feb 24, 2006 10:46 am
Forum: Wireless Networking
Topic: Holes in bottom of outdoor box supplied with rb500
Replies: 38
Views: 7563

it's for condensation. if there is no hole, water will start to appear inside the box after temperature changes. even hdd enclosures have small holes for `breathing`
Throw some silica bags inside of the box...

Best
Is this working ? How much kilos of silica we should use :)?
by aviper
Sun Feb 19, 2006 8:40 am
Forum: Wireless Networking
Topic: 2.9.13 good wireless results
Replies: 11
Views: 4045

I have -49 signal (5ghz-turbo) in about 10 km and sr5. With cm9 I've got about -60.

My point: You can get more !!! :twisted: :twisted: :twisted:
by aviper
Fri Feb 17, 2006 3:16 pm
Forum: RouterBOARD hardware
Topic: Red + blue LED's on ... no connect to mikrotik :(
Replies: 5
Views: 3186

Re: ..

My problem was in power adapter!

I try to other power adapter (12V/300mA) and all it was OK :)
You should use bigger power adapter ... 12v @ 1.0-1.2A
by aviper
Mon Feb 13, 2006 10:26 am
Forum: General
Topic: Pocket PC
Replies: 9
Views: 2448

"In every joke there is a truth"

http://www.ipaqlinux.com/

But I'm not sure how much CPU power you will need :).
by aviper
Mon Feb 13, 2006 10:18 am
Forum: General
Topic: Mikrotik Chat
Replies: 37
Views: 10966

I prefer IRC (I can always be online, and logging everything, it is anoying to enter in the channel and see 10 ppl, and nobody online, but it is better than entering and see nobody at all). :)

Could you make this chat or other something like reference to irc.freenode.org #mikrotik ?
by aviper
Fri Feb 10, 2006 12:55 am
Forum: Wireless Networking
Topic: Slow Links (Antani Pictures included)
Replies: 8
Views: 3316

nstream, 5ghz-turbo, what platform do you use? How much traffic do you pass ? Version of MT? Complete conf? and etc.
by aviper
Thu Feb 09, 2006 11:13 pm
Forum: RouterBOARD hardware
Topic: Routerboard performance :) ?
Replies: 6
Views: 3530

but but but ... :) http://wiki.mikrotik.com/wiki/Image:350mbps.jpg :/ 4 routerboards everyone 70 mbit throw wireless 32000 pps/4 = 9000 pps ... I can't get more than 32 mbits with 3000 pps ... :/ Where will be ready the test site conf. from MUM? :} I want to see the magic. Is WDS soo much CPU hungry...
by aviper
Thu Feb 09, 2006 10:58 am
Forum: Wireless Networking
Topic: Are there known bugs in MT 2.9.2 which may cause crashes?
Replies: 18
Views: 4144

ooops:)
I mean "There are no profiles !!!" :)
by aviper
Thu Feb 09, 2006 10:52 am
Forum: RouterBOARD hardware
Topic: Routerboard performance :) ?
Replies: 6
Views: 3530

Re: Routerboard performance :) ?

Okey. Here are few questions that needs answers :). 1. I've got couple of RB 512 and 532 with licenses level 4 and 5 and upgrade to 2.9.12. 2nd I need to make a link (5 km) for optic backup and 2nd route for now (I need more trafic and the optic won't be upgrade very fast). I use 2 RB512 + SR5s. I'...
by aviper
Thu Feb 09, 2006 12:04 am
Forum: Wireless Networking
Topic: Are there known bugs in MT 2.9.2 which may cause crashes?
Replies: 18
Views: 4144

There are no profies in this forum :).
by aviper
Wed Feb 08, 2006 10:51 pm
Forum: RouterBOARD hardware
Topic: Routerboard performance :) ?
Replies: 6
Views: 3530

Do you think I'll get more without nstream on non-turbo ?
by aviper
Wed Feb 08, 2006 10:02 pm
Forum: RouterBOARD hardware
Topic: Routerboard performance :) ?
Replies: 6
Views: 3530

Routerboard performance :) ?

Okey. Here are few questions that needs answers :). 1. I've got couple of RB 512 and 532 with licenses level 4 and 5 and upgrade to 2.9.12. 2nd I need to make a link (5 km) for optic backup and 2nd route for now (I need more trafic and the optic won't be upgrade very fast). I use 2 RB512 + SR5s. I'v...
by aviper
Tue Feb 07, 2006 8:07 pm
Forum: Wireless Networking
Topic: Are there known bugs in MT 2.9.2 which may cause crashes?
Replies: 18
Views: 4144

Today,when the computer crashed again I went to the other computer and when loggen into MT I saw that the two routers were linked,but when i tried to ping the another antena's IP received only request timed out.So it's look like that the computer not crash,but there is some problem which i can't re...
by aviper
Tue Feb 07, 2006 10:25 am
Forum: Wireless Networking
Topic: lost connection to , got deauth: class 2 frame recieved (6)
Replies: 6
Views: 7610

Yeap, and it works peferct, until 1 week ago, when I change CM9s with SR5s.
:). Now it works better :).
by aviper
Mon Feb 06, 2006 12:25 pm
Forum: RouterBOARD hardware
Topic: Can I Update RouterBoard with CF card?
Replies: 1
Views: 1680

Can I Update RouterBoard with CF card?

Can I Update RouterBoard with CF card. I want to save the .npk file on one CF plug it, and start the RB :).
What should be the CF card file system?

P.S. The main purpose of this is to test my new smart card reader :).
by aviper
Sat Feb 04, 2006 10:06 am
Forum: General
Topic: Pocket PC
Replies: 9
Views: 2448

Typical MT solution would be:
Install Linux (it isn't soo hard), install Wine. And Emulate it ;).

*jokin*
by aviper
Tue Jan 31, 2006 9:53 am
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 328
Views: 96087

"Small nmap port" or simular features ?
by aviper
Fri Jan 27, 2006 8:56 pm
Forum: Wireless Networking
Topic: Holes in bottom of outdoor box supplied with rb500
Replies: 38
Views: 7563

Spiders are dudes :). I've got problem with them only once. Due to the common way of building ISPs in my country (huge switch LANs sometimes with more than 15 switch deeps) I often have devices in hi places (posts, houses, under roofs and etc.). And I branch of the network gone down couple of month ...
by aviper
Fri Jan 27, 2006 5:19 pm
Forum: General
Topic: WIMAX Mini-PCI is out!
Replies: 16
Views: 13327

i make order for this cards and will be testing... I've got a mail from MikroTik support to my exactly same question. They said they'll look into it as soon as they get hold of a SR3... Christian Can you send url from where do you order this cards? aviper <AT> mail <DOT> bg P.S. I don't know the Fo...
by aviper
Wed Jan 25, 2006 1:16 am
Forum: General
Topic: WIMAX Mini-PCI is out!
Replies: 16
Views: 13327

This is modified 802.11a not WiMax ...
by aviper
Tue Jan 24, 2006 11:12 am
Forum: General
Topic: New Ubiquiti MiniPci Cards...
Replies: 4
Views: 1778

I think that more interesting than sr3,sr4,sr9 will be implementation of MT on LiteStation 2, and even more if UB release LiteStation 5 :). I think that combo LiteStation 5 + MT will be bestseller ;).
by aviper
Mon Jan 23, 2006 1:11 am
Forum: General
Topic: MUM
Replies: 19
Views: 5505

I see routerboards 5xx without expansion card in the pics, soo this should be bandwidth with only 2 cards !
I won't belive it even seeing it with my eyes :).
by aviper
Sun Jan 22, 2006 1:34 am
Forum: General
Topic: is there a support IRC channel??
Replies: 4
Views: 2046

There is #mikrotik in irc.freenode.org. :)
by aviper
Sat Jan 21, 2006 12:55 am
Forum: General
Topic: XScale
Replies: 23
Views: 10767

Vote: Maybe ... :)
by aviper
Wed Jan 18, 2006 8:57 pm
Forum: General
Topic: PoE Switches
Replies: 15
Views: 5079

According to the standard 802.3af the maximal power that can be transmitted over the Ethernet is 15,4W.
Soo sooner or later we will see such devices ;).
by aviper
Tue Jan 17, 2006 12:15 am
Forum: General
Topic: Problems Bridging 2 Vlans
Replies: 3
Views: 1796

I had problem bridgeing vlan150 (on eth1) with eth2, and eth3 with eth1 (without vlan).
Which version of Mikrotik do you use (there was a change in bridging in 2.9.9 and upper). Try doing your setup with 2.9.8 and 2.9.11 and see if there is difference ...
by aviper
Thu Jan 12, 2006 4:13 pm
Forum: Wireless Networking
Topic: SR5 400mW on Router Board 511
Replies: 10
Views: 3561

The problem is high power these wi-fi cards drain.
Local reseller told me that I could use max 2 of the on 4 port and 8 port cards.
Anybody knows how much power does a Motherboard provide at PCI slot ?
by aviper
Wed Jan 11, 2006 10:55 pm
Forum: General
Topic: New Features in 2.9.11
Replies: 9
Views: 5043

Another Q: *) updated RTL8169 driver; Is it working now? :) (VLAN tested?) *) added ability to enable & disable installed packages; GREAT ! Now we can use Wireless and Wireless-test and switch between them with one reboot ? *) test packages included in big upgrade package - each requires enablin...
by aviper
Wed Jan 11, 2006 10:34 pm
Forum: RouterBOARD hardware
Topic: Newbie questions about Routerboards.
Replies: 4
Views: 2212

Check the utp patchcord?...
Yes I resolve the the problem alone :( UTP patchcord or worst my laptop NIC (have to resolve it better).
Sorry for the alarm guys.
by aviper
Wed Jan 11, 2006 11:31 am
Forum: RouterBOARD hardware
Topic: Newbie questions about Routerboards.
Replies: 4
Views: 2212

Yes, i try throw setup, and without setup. When I start the RB and try to enter from WinBox ... sometimes it connects, but when disconnect, and try to connect again ... timed out. I give different IPs to different port ... and nothing. I can't ping from RB, I can only arping. Interfaces were enabled...
by aviper
Tue Jan 10, 2006 11:30 pm
Forum: RouterBOARD hardware
Topic: Newbie questions about Routerboards.
Replies: 4
Views: 2212

Newbie questions about Routerboards.

Finally I bought one of this hardware babies, but I've got a problem. I resolder my serial cable, and now I've got connections with routerboard throw serial console, but I can't geto to it from the network. 1. Without Ip adress from winbox, I see the RB, but it get pingtimeout. 2. With IP adress, wi...
by aviper
Tue Jan 10, 2006 7:36 pm
Forum: RouterBOARD hardware
Topic: Lame question (really fast answer need)
Replies: 3
Views: 2151

I've bought one Serial cable:
pin1-pin1; pin2-pin2 ... and etc.
And I had to resolder it :). But I didn't understand why it doesn't work, until I found the answer in documentation :).
by aviper
Tue Jan 10, 2006 1:17 pm
Forum: RouterBOARD hardware
Topic: Lame question (really fast answer need)
Replies: 3
Views: 2151

Lame question (really fast answer need)

Is there difference between serial cable and Null Modem Serial cable?
by aviper
Tue Jan 10, 2006 2:17 am
Forum: Wireless Networking
Topic: NMP-8602
Replies: 1
Views: 1484

Officialy: http://www.mikrotik.com/docs/ros/2.8/guide/driverlist NO But: http://www.mikrotik.com/docs/ros/2.9/guide/driverlist In 2.9.x. Yes Btw I saw this card and in our market ? Did you bought a couple, did you test them? Has anyone test 5413 or everybody is running 5213? The difference I saw in ...
by aviper
Mon Jan 09, 2006 9:38 am
Forum: General
Topic: Customize mikrotik routeros configuration page
Replies: 5
Views: 4044

I throw the dices and they show me that: {Maybe} They guy is talking about the configuration via web: http://router_ip/ :)
by aviper
Mon Jan 09, 2006 9:35 am
Forum: General
Topic: Station to Bridge - Strange Bahvior
Replies: 8
Views: 2592

Did you try first to change the freq. ?
I had the same problem "extensive data loss" and "class 2 frame received (6)", but I didn't look in the registration table menu, soo I don't know did I have the same behaviour.

http://forum.mikrotik.com//viewtopic.php?t=5796
by aviper
Mon Jan 02, 2006 7:01 pm
Forum: General
Topic: Anyone pushing more than 100Mbps on GigE?
Replies: 18
Views: 6161

Soo to continue the theme: First the term I was missing was lanes (which I wrote "highways"). Soo if you are interested in different chipset supports here is a brief of the sittuation: PCI Chipsets: All Via chipset uses: »VT8251, VT8237x, VIA VT8235 south bridges which supports only PCI bu...
by aviper
Sun Jan 01, 2006 4:53 pm
Forum: General
Topic: Anyone pushing more than 100Mbps on GigE?
Replies: 18
Views: 6161

Jumbo frames are "trapped" in one ethernet segment, and all devices (including switches) should support it and the "Jumbo frame rate set" should be the same. The cheapest switch with jumbo frame I found in my country is Cnet cgs-500/e http://www.cnet.com.tw/product/cgs-500.htm wh...
by aviper
Sat Dec 31, 2005 3:47 pm
Forum: General
Topic: Bridge on Intel platform
Replies: 4
Views: 1943

OK - it is solved. The two routers with problems both had the wireless interface as station. As soon it was changes to bridge everything worked as expected. The only problem is, that I don't understand why you can't bridge an interface in station mode ??? Thanks for your help. Kim C I think 802.11 ...
by aviper
Thu Dec 22, 2005 11:21 pm
Forum: Wireless Networking
Topic: lost connection to , got deauth: class 2 frame recieved (6)
Replies: 6
Views: 7610

Okay, I've start again the problem link and I've got the same problem, even changing frequency. But I saw something strange. After I searched the google I saw that the problem: class 2 frame recieved is described as client that isn't authenticated. Soo I search for the reason there, I saw that my Wi...
by aviper
Thu Dec 22, 2005 5:28 pm
Forum: Wireless Networking
Topic: SR2 output power - please read
Replies: 51
Views: 18702

Re: SR2

The RB already needs my attention do to some wierd bandwidth problem. It fails after about 6 hours and requires reboot, but the watchdog doesn't reboot it. It's not lockedup, just becomes extremely slow passing packets to ethernet1(WAN).
Just tip: Try to disable connection tracking ...
by aviper
Thu Dec 22, 2005 11:42 am
Forum: Wireless Networking
Topic: SRx's and compression
Replies: 6
Views: 3251

new info : we got pair of 5006X (=5413) chipset cards. Again, the situation is the same : as soon as we enable hardware compression, we get lower throughput. The actual performance hit depends on data pushed thru the link, but generally is around 25-40% compared to "compression=no" settin...
by aviper
Wed Dec 14, 2005 11:55 pm
Forum: General
Topic: 2.9.9 is out...
Replies: 5
Views: 1966


*) changed bridge configuration approach;
I asked about an issue with bridge vlans. When I bridge my ethernet interface, bridged vlan interfaces stops working.
What is the nature of this change ? The changelog isn't clear enough for me ...
by aviper
Sun Dec 11, 2005 1:14 am
Forum: Wireless Networking
Topic: AP Bridge and WDS station vs Bridge and station
Replies: 8
Views: 10020

FYI, If you need to change the channel of the p2p link, make sure you change the Remote Unit first, otherwise you'll be driving out to the location to change the frequency on site because you lost connection to the remote unit. . If you miss to change the channel of the oposite side first, you can ...
by aviper
Wed Dec 07, 2005 5:46 pm
Forum: Wireless Networking
Topic: Driver Support
Replies: 3
Views: 2004

Is there any plans for support of Atheros 5005vl (velocity) chipset?

(Most of MIMO cards use 2 of this chipsets with 2 radios. It is very cheap that you get 2 radios at price of 1 and a half :) ).
by aviper
Mon Dec 05, 2005 6:39 pm
Forum: Wireless Networking
Topic: lost connection to , got deauth: class 2 frame recieved (6)
Replies: 6
Views: 7610

The answer:
http://forum.mikrotik.com//viewtopic.php?t=5538

In retrospection:
Change the frequency.
by aviper
Mon Dec 05, 2005 3:22 pm
Forum: Wireless Networking
Topic: Slow downstrem, good upstrem? Any ideas?
Replies: 3
Views: 2052

i have same problem...
Do you have lot of broadcast through your wirelesses?
by aviper
Thu Dec 01, 2005 8:46 pm
Forum: Wireless Networking
Topic: Any ideas, why this wireless cannot connect ?
Replies: 5
Views: 7813

I've changed the frequence and everything now works fine. I've got a tower with 3 wireless cards set to ap-bridge and 3 remote mikrotiks. One week after this issue the other 2 cards got the same poblem, and I use the same way to repair them (changing the freq.). Cards are new from box (they were wor...
by aviper
Thu Dec 01, 2005 8:33 pm
Forum: Wireless Networking
Topic: Slow downstrem, good upstrem? Any ideas?
Replies: 3
Views: 2052

Slow downstrem, good upstrem? Any ideas?

Hello, I've got one link on 5 GHz SR5. I don't know why but there is good upstream, and slow downstrem: From client side: Tx/Rx rate 48/18 Tx/Rx ccq 90/40 Real Tx/Rx rate 6/20 (as seen in WinBox) the picture is: AP-Bridge --------- wds-station (nstrem on, polling on, compresion on, best-fit, 5ghz-tu...
by aviper
Sat Nov 26, 2005 12:59 am
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

I've long known that the CCQ will be low when no data is being transmitted, but these problems keep the CCQ at 0 or 1, no matter what I am trying to do, and no matter how much data I am trying to transfer. If I try to transfer data on one of these problem links, it fails, and sometimes the link eve...
by aviper
Thu Nov 24, 2005 1:20 pm
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

Yes, the main problem was that I thought that CCQ is theoretical maximum TX and RX. After few tests I understand that this is "real transfer". Soo after all tx-ccq is tx-connection in mbit/s divide by real amont of data passing throw this wireless interface. @hitek146: For example: When a ...
by aviper
Mon Nov 21, 2005 10:46 am
Forum: General
Topic: Searching for ggbit lan with good vlan support!
Replies: 1
Views: 1050

Searching for ggbit lan with good vlan support!

The title says everything. Do you have any "real-world" experience with ggbit NICs + VLAN ?

P.S. @ Mikrotik, will we see good support for 8169, this is very cheep ggbit card and in some countries it is the only ggbit card for price under 100 $ ;).
by aviper
Mon Nov 21, 2005 10:10 am
Forum: Wireless Networking
Topic: Any ideas, why this wireless cannot connect ?
Replies: 5
Views: 7813

MT 2.9.6 is not stable if you are using 2.4 ghz .. I've had the same problem and my prism2 card got burned cuz of a storm.. now i'm using MT 2.8.26 and it work fine I dont' get users disconnected and data loss ofcoure changed the prism2 card. ps. talking about 2.4 ghz .. MT 2.9.6 works perfect in 5...
by aviper
Sat Nov 19, 2005 1:20 pm
Forum: General
Topic: Mikrotik is so weak to deal with PPPoE dials simultaneously?
Replies: 9
Views: 2676

pppoe server and pptp server on celeron 2.4 Ghz, 512 ram. Setup on local net, more than 1000 clients, simultaneously connect 5-20 clients - no problem on PPTP or PPPOE !!! 2.8.16, 18 22, 24, 26, 2.9.1, 2, and 2.9.6 all this version has no problem on server. Hello, I'm just curious, how much traffic...
by aviper
Fri Nov 18, 2005 10:41 pm
Forum: Wireless Networking
Topic: Any ideas, why this wireless cannot connect ?
Replies: 5
Views: 7813

Any ideas, why this wireless cannot connect ?

I've got problem with one wireless, it is working fast enough, but when working little it stops and cannot connect to the ap again. miniPCI card is CM9. Software is Mikrotik 2.9.6, and the oposite side is the same ... 10:22:26 wireless,info cm9-122-116: lost connection to 00:0B:6B:**:**:**, extensiv...
by aviper
Mon Nov 14, 2005 12:39 pm
Forum: General
Topic: Vlan and bridge questions (maybe bug)
Replies: 0
Views: 948

Vlan and bridge questions (maybe bug)

Soo. I've got this scheme: lan1-MT1 --------wireless-------wlan1.MT2.ether1 ---- gateways lan2-MT3 --------wireless-------wlan2 I make bridge1 of wlan1 and vlan1 (vlan1 is on ether1). And when I make bridge2 of wlan2 and ether1 (I don't want to use vlans here). Bridhe1 stops working. After all I mak...
by aviper
Thu Nov 10, 2005 2:40 pm
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

Okey, I've recieved a pair of 400mW beasts, and one pair of CM-9 "kitties". This weekend I'll try to get some more from this link with those 2 cards. A friend of mine told me that Senao's I've bought are very good for long distance. And again problems. With SR5 I get 75 % of 48 mbit turbo...
by aviper
Thu Nov 03, 2005 11:59 am
Forum: General
Topic: Bridge stop work after reboot.
Replies: 9
Views: 2417

It is not important.I tried without any ip addresses and with ip address on bridge,but there is no change.Is it possible to be hardware problem,because when I disable and enable ether1 after reboot bridge start work? Did you try with other NICs? Are NICs with the same chipset or different. Sometime...
by aviper
Sat Oct 29, 2005 12:47 am
Forum: General
Topic: WHat is the Best ethernet interface card
Replies: 13
Views: 3961

and what is the point of decreasing speed?
Bigger stability. 8139 + Repotec switches make 130 meters on 100 mbits, and 160 meters on 10 mbits (with good cable).
by aviper
Fri Oct 28, 2005 12:41 pm
Forum: Wireless Networking
Topic: WDS questions
Replies: 1
Views: 1787

del me (mistake)
by aviper
Fri Oct 28, 2005 11:58 am
Forum: Wireless Networking
Topic: WDS questions
Replies: 1
Views: 1787

WDS questions

I'm following how-to "Transparent Bridge, using WDS". I have few questions. First how to understand what is the current "ccq" and connection between 2 WDS mikrotiks (2.9.x). Second is there a problem bridge-ing wds-wirelesses with VLANs not with NICs ? I've try to run it, but i'v...
by aviper
Wed Oct 26, 2005 9:50 pm
Forum: General
Topic: WHat is the Best ethernet interface card
Replies: 13
Views: 3961

for soho i use DLINK nic i already use it for 1,5 year without probem, i use DLINK because INTEL nic is too expensive in indonesia :D DLINK have never build own chipsets - they use Realteks and ViAs chipsets. Problem: I'm interested in VLAN problems with some NICs mentioned in the manual. I want to...
by aviper
Fri Oct 21, 2005 10:35 pm
Forum: Wireless Networking
Topic: Can't pass trafic over link
Replies: 3
Views: 2151

I've got the same problem with "starting" with mikrotik the answer:
http://www.mikrotik.com/docs/ros/2.8/ho ... to.content

See section: How to Transparently Bridge two Networks?
by aviper
Fri Oct 21, 2005 10:25 pm
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

Another fast question. Is WDS faster than "bridge" mode ? Which license level does WDS require?

P.S. As I understand from other posts, routing is faster than EoIP ?
by aviper
Tue Oct 18, 2005 10:17 am
Forum: General
Topic: Mikro2.9.2
Replies: 5
Views: 1593

@sergejs,normis Hi problem with my mt.... I set all up and it works, it worlks like a humble AP for little wifi community, but when the comp (where MT is installed) powers off, and then on I cant ping eth neither the wlan interface why???? Do you have monitor on this router? It sounds like problem w...
by aviper
Sat Oct 15, 2005 10:14 am
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

Bizarrely, we found 2x24Mbps works better than 54Mbps (non-turbo) on a given link conditions. That's because with Turbo on lower speed you're using a more robust modulation (16QAM instead of 64QAM) and spreading out your data over 40MHz instead of 20MHz. You have twice the subcarriers and less comp...
by aviper
Fri Oct 14, 2005 9:10 pm
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

Okey, I've recieved a pair of 400mW beasts, and one pair of CM-9 "kitties". This weekend I'll try to get some more from this link with those 2 cards. A friend of mine told me that Senao's I've bought are very good for long distance.
by aviper
Sun Oct 02, 2005 10:41 pm
Forum: General
Topic: Transparent Bridge, using EoIP tunnel - How-to question!
Replies: 5
Views: 2196

I tried this out with 2.9rc7. After about an hour the bridge went crazy and started flooding the network with packets (brought the whole network down until I figured out what it was.) I removed the bridge and now it is back to normal. I set it up exactly as in the how-to. (I am very new to Microtik...
by aviper
Sat Sep 17, 2005 10:03 pm
Forum: Wireless Networking
Topic: internet delays!!!
Replies: 2
Views: 2291

Aside from your question:

You should split your network in little networks. Main problem could be BIG amont of broadcoasting over wirelesses. And are you sure this 1.8 up to 2.2 MB/s are enough ?
by aviper
Sat Sep 17, 2005 6:34 pm
Forum: General
Topic: PoE problem
Replies: 11
Views: 3372

Sounds like PoE has gone away. Did you try with another PoE couple ?
by aviper
Fri Sep 16, 2005 3:25 pm
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

Nstreme improves throughput only if - there is enough CPU power to allow the overhead (recent MT versions are much better in this respect) - you are above a "marginal" signal level (sometimes you have to "lock" the radio to a rate one lower than the max it tries to negotiate to)...
by aviper
Fri Sep 16, 2005 2:19 pm
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

status: connected-to-ess band: 5ghz frequency: 5595 tx-rate: 24Mbps rx-rate: 24Mbps ssid: *** bssid: *** radio-name: *** signal-strength: -52 tx-signal-strength: -50 tx-ccq: 49 rx-ccq: 48 wds-link: no nstreme: yes polling: yes framing-mode: best-fit framing-limit: 3200 routeros-version: 2.8.26 Ok st...
by aviper
Fri Sep 16, 2005 10:40 am
Forum: General
Topic: Transparent Bridge, using EoIP tunnel - How-to question!
Replies: 5
Views: 2196

you ask about setting IP address for Bridge ?

you can as well configure it for one of the interfaces in the bridge.
Ok soo, the 5 step is unduly.
That was the questions - thanks.
by aviper
Fri Sep 16, 2005 10:19 am
Forum: General
Topic: Transparent Bridge, using EoIP tunnel - How-to question!
Replies: 5
Views: 2196

Transparent Bridge, using EoIP tunnel - How-to question!

Last step: Move the IP addresses from Ethernet to bridge interfaces: [admin@AP] ip address> set [find interface=ether1 ] interface=bridge1 [admin@AP] ip address> print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 10.0.0.215/24 10.0.0.0 10.0.0.255 bridge1 1 10...
by aviper
Thu Sep 15, 2005 6:54 pm
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

5ghz-turbo just increase the tx-strength to -60
tx-power=default should be tx-power=20, but I'll try it right away
by aviper
Thu Sep 15, 2005 6:02 pm
Forum: Wireless Networking
Topic: About tx-ccq and rx-ccq and low bandwith with strong signal
Replies: 23
Views: 22845

About tx-ccq and rx-ccq and low bandwith with strong signal

I'm wondering how are they calculate ? I've got link 9 km and I'm getting very strong signal -49 to -50 dB. But those variables are standing low and unpredictable about 20 to 30 percents. The links are connecting with 36 Mbps, and 20 % are about 8-9 Mbps, which is the real amont of data transfered t...