Community discussions

MikroTik App

Search found 1376 matches

by NetworkPro
Mon Jan 15, 2024 12:12 am
Forum: General
Topic: Netinstall sending offer, but not installing [SOLVED]
Replies: 30
Views: 28511

Re: Netinstall sending offer, but not installing [SOLVED]

Success with native booted Linux.

Ohhh yeah. 😁 :mrgreen:
by NetworkPro
Sun Jan 14, 2024 12:10 pm
Forum: Virtualization
Topic: OpenWrt for ARM-based RB1100AHx4
Replies: 12
Views: 12398

Re: OpenWrt for ARM-based RB1100AHx4

That's a different crowd to talk to over there, here as you can see, a more enterprise crowd of different people, who have made the choice, to be more serious, is available.

Do you want to talk to friendly professionals or edgy hackers potentially gangsters?

Make a routing decision 😁
by NetworkPro
Sun Jan 14, 2024 1:11 am
Forum: Beginner Basics
Topic: DDoS help
Replies: 42
Views: 5150

Re: DDoS help

I endured the biggest one on the internet at the time and managed to stay up at all times thanks to CCR whatever the flagship was at that time. And my own efforts of course. And a scrubbing center of course. You know that abstract interface in the end simple simple a mindblower. However I also did d...
by NetworkPro
Sun Jan 14, 2024 12:06 am
Forum: Virtualization
Topic: OpenWrt for ARM-based RB1100AHx4
Replies: 12
Views: 12398

Re: OpenWrt for ARM-based RB1100AHx4

I am also interested.

@Ingdaka bro relax it's a good thing the OpenWRT comes in handy too often. He is just asking if someone is already knowledgeable about it. He is not asking you to support it in an enterprise or telecom scenario. Don't attack. Rather be helpful in any way.
by NetworkPro
Sat Jan 13, 2024 11:10 pm
Forum: General
Topic: Netinstall sending offer, but not installing [SOLVED]
Replies: 30
Views: 28511

Re: Netinstall sending offer, but not installing [SOLVED]

by RouterBOOT 6.43.12
by NetworkPro
Sat Jan 13, 2024 10:59 pm
Forum: General
Topic: Netinstall sending offer, but not installing [SOLVED]
Replies: 30
Views: 28511

Re: Netinstall sending offer, but not installing [SOLVED]

1100ahx4 formatted flash now netinstall is not installing - sending offer missing probably the netbios setting mentioned above all other settings Ive already tried tried many combos of the mentioned and other solutions found by me in the past, nothing worked this time must try Linux cli next please ...
by NetworkPro
Wed Dec 11, 2019 11:24 pm
Forum: General
Topic: pppoe keepalive-timeout not working ?
Replies: 11
Views: 15974

Re: pppoe keepalive-timeout not working ?

We also have this problem. We can try idle-timeout 60 seconds on the profile however this is not ideal at all.

We should use one session per host setting and each client to come with his own MAC.
by NetworkPro
Thu Feb 28, 2019 6:01 pm
Forum: Scripting
Topic: UPnP Multi-WAN
Replies: 4
Views: 4751

Re: UPnP Multi-WAN

If you can ask your question so clearly, you can figure out the answers without my help. I am busy on other scripts. Regards.
by NetworkPro
Fri Feb 15, 2019 10:50 am
Forum: General
Topic: Feature requestS: MACs on VLANs and multiple untagged VLANs
Replies: 0
Views: 1018

Feature requestS: MACs on VLANs and multiple untagged VLANs

Hello dear MikroTik developers, Please consider adding and taking future care of the following features: - multiple vitual interfaces attached under a physical interface - each with own MAC address, similar to how VRRP can be used - and/or the ability to add multiple VLANs, including untagged, that ...
by NetworkPro
Wed Nov 07, 2018 8:52 am
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 53155

Re: v6.43.4 [stable] is released!

@usmany this should solve it for you backup your config with a backup file, as well as export to text format upgrade to the latest beta with only the packages you are using and you want to keep system security advanced-tools wireless dhcp ppp upload only these npks if everything goes fine, then swit...
by NetworkPro
Sat Oct 27, 2018 5:43 pm
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 53155

Re: v6.43.4 [stable] is released!

yes, I remember, however this breaks the pref-src functionality, so I report it as a (design) bug. I think pref-src should actually adjust the outgoing IP in this scenario as well.
by NetworkPro
Sat Oct 27, 2018 1:33 pm
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 53155

Re: v6.43.4 [stable] is released!

pref-src in alternative routing table, in combination with output mangle routing do not set the correct output IP
by NetworkPro
Wed Dec 20, 2017 12:04 am
Forum: General
Topic: script problem for load balancing
Replies: 20
Views: 3642

Re: script problem for load balancing

but what exact rules do you use that are similar to the PCC rules?.. just wonder... 1. Let ECMP route the first packet of a connection randomly 2. Mark connection based on outgoing interface, after ECMP has done it's randomness 3. Mark routing to force the packets to use the specific route even aft...
by NetworkPro
Sun Dec 10, 2017 11:55 am
Forum: General
Topic: Interface packet Drops on an octacore xeon with intel nics
Replies: 32
Views: 21358

Re: Interface packet Drops on an octacore xeon with intel nics

Hi :) - What is the queue of the ether1 interface ? If you increase it, do you have less TX Drops ? Change from only-hardware-queue to some Queue type multi-queue-ethernet-default and increase from 50 to 1000 only for test ? (could add jitter for those packets that will not be dropped anymore which ...
by NetworkPro
Mon Feb 06, 2017 12:34 pm
Forum: General
Topic: Feature Request: PVST+/MSTP
Replies: 8
Views: 8461

Re: Feature Request: PVST+/MSTP

Honestly an SDN Layer that abstracts this crap would be preferably nowadays. Vendor 1 supports 1 thing and didn't really document it, vendor 2 supports another - I do not want to waste time with shitty configurations of shitty implementations of shitty standards. I have a packet flow from few server...
by NetworkPro
Mon Jan 30, 2017 4:31 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 390
Views: 144785

Re: v6.39rc [release candidate] is released

6.39rc20 address-list problem had address list edning in 0/24 changed it to start_ip-dash-end_ip and it broke the start ip -> dash -> end ip syntax (192.168.1.1-254) does not even work 192.168.1.1-192.168.1.254 - this more explicit one, works tried to change it again - cant change it anymore to anyt...
by NetworkPro
Mon Jan 23, 2017 7:01 pm
Forum: RouterBOARD hardware
Topic: Redundant power inputs
Replies: 27
Views: 17863

Re: Redundant power inputs

It needs to be Enterprise grade, is this diode solution sold pre-made somewhere ?
by NetworkPro
Sun Jan 22, 2017 11:21 am
Forum: General
Topic: hamachi server
Replies: 21
Views: 11233

Re: hamachi server

Hello MikroTik staff,

The Feature Request is an easy to use L2 VPN Mesh (P2P) with NAT Traversal, where the specifics are controlled and assisted by the server (RouterOS).
by NetworkPro
Mon Oct 10, 2016 6:52 am
Forum: General
Topic: CDP from vmware dvswitch
Replies: 0
Views: 1175

CDP from vmware dvswitch

Hi,

It seems RouterOS can not decode the CDP from vmware dvswitch when its set to advertise or both advertise and Listen

Image


Can this be made compatible ?

Thank you
by NetworkPro
Mon Apr 25, 2016 3:58 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 111050

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

I revived the CCR1072 by NetInstall with preserve configuration.

However now there is a problem with LCD: it is white and does not display anything.

6.36rc6
by NetworkPro
Fri Apr 22, 2016 5:14 pm
Forum: General
Topic: v6.35 [current] is released!
Replies: 103
Views: 40838

Re: v6.35 [current] is released!

entire device went silent on reboot and does not come up

datacenter reported port is flapping so it must be in a reboot loop
by NetworkPro
Fri Apr 22, 2016 3:56 pm
Forum: General
Topic: v6.35 [current] is released!
Replies: 103
Views: 40838

Re: v6.35 [current] is released!

After some clicking I sniffed and saw that packet indeed goes out. Its just not catched by mangle rule.

Now current problem is that MASQ rule does not change the source IP of the packet as it goes out.

:? :? :?
by NetworkPro
Fri Apr 22, 2016 2:22 pm
Forum: General
Topic: v6.35 [current] is released!
Replies: 103
Views: 40838

Re: v6.35 [current] is released!

routing is not working or packet mark is not working packet comes in on interface and is logged by prerouting after which it disappears supout sent to support reproduce: create Route Rule that sends packet to some other router that routes it back to this one on another interface receive same packet ...
by NetworkPro
Wed Mar 30, 2016 11:38 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 187101

Re: v6.35rc [release candidate] is released, new wireless package!

nand - implemented once a week nand refresh to improve stored data integrity (will increase sector writes)

Also for USB Flash in x86 ?
by NetworkPro
Sat Mar 12, 2016 9:09 am
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

If you need to send out packets without delay or drop, you will have to configure packet queue settings that are already present.

There is no such thing as LLQ this is made up and does not exist. It's a lie.

For more info check the link in my signature.
by NetworkPro
Wed Dec 23, 2015 1:11 pm
Forum: RouterBOARD hardware
Topic: RB450G upgrade failed with ROS 4.1 from 3.30
Replies: 38
Views: 13010

Re: RB450G upgrade failed with ROS 4.1 from 3.30

haha :lol: NetInstall still does not work tested on 2 PCs Win 10 x64 it worked however on a 32 bit Win 10 actually it worked after enabling all the disabled protocols on the adapter and rebooting the PC I think without rebooting the PC between tries it will not work. @ Mikrotik, more QA is needed.
by NetworkPro
Fri Mar 20, 2015 11:34 am
Forum: General
Topic: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib
Replies: 15
Views: 17698

Re: Load Balance: 3 PPPoE adsl (same ISP)+webProxy, it is possib

Hi, These line speeds are not fast, todays websites are heavy and the experience will be "slow". "bonding" would require a piece of equipment in a datacenter, or someone to provide it as a service: http://simonmott.co.uk/images/vpn-bonding/vpn-bonding-diagram.png The ADSL lines m...
by NetworkPro
Tue Feb 03, 2015 3:15 pm
Forum: Wireless Networking
Topic: Beamforming
Replies: 9
Views: 5805

Re: Beamforming

Interesting what Qualcomm Atheros has to bring to the noisy world of Wi-Fi and what Mikrotik are willing to put in their devices.
by NetworkPro
Mon Feb 02, 2015 1:09 pm
Forum: Wireless Networking
Topic: Wireless disconnected, group key exchange timeout
Replies: 68
Views: 78348

Re: Wireless disconnected, group key exchange timeout

My solution is to turn on the max secure settings and select Wi-Fi clients that are compatible with, and work with these settings (Management Protection).
by NetworkPro
Fri Dec 05, 2014 9:14 am
Forum: Scripting
Topic: UPnP Multi-WAN
Replies: 4
Views: 4751

Re: UPnP Multi-WAN

FUTURE VERSION of this script may use nested loops to compare the NAT entries as unsorted Arrays:

http://www.google.com/search?q=nested+l ... comparison

Contributions are Welcome!
by NetworkPro
Fri Nov 07, 2014 1:38 am
Forum: Wireless Networking
Topic: Wireless disconnected, group key exchange timeout
Replies: 68
Views: 78348

Re: Wireless disconnected, group key exchange timeout

That value sounds risky in terms of security.

Does it actually fully solve the problem?
by NetworkPro
Tue Sep 23, 2014 9:59 am
Forum: Beginner Basics
Topic: Simple QoS
Replies: 1
Views: 1243

Re: Simple QoS

I've posted about this here http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service

Let me know if anything still blocks you from achieving the goal and I will add the information to the wiki.
by NetworkPro
Tue Sep 23, 2014 9:51 am
Forum: General
Topic: Intel i210 Server cards support
Replies: 2
Views: 1892

Re: Intel i210 Server cards support

Export a supout rif and send it to mikrotik support e-mail. Write ~ "Please add support for Intel i210, supout rif attached." Include URL to motherboard site. Wait some time for the support to be added and use another while you wait. Register for nightly testing versions in your www.mikrot...
by NetworkPro
Sun Jul 20, 2014 9:04 pm
Forum: General
Topic: Feature Request: PVST+/MSTP
Replies: 8
Views: 8461

Re: Feature Request: PVST+/MSTP

Hello,

MSTP would be nice and easy to use and should provide even better position on the market.

-NetworkPro
by NetworkPro
Thu Jul 17, 2014 8:17 am
Forum: General
Topic: USB 3G modem : ZTE MF667 model
Replies: 4
Views: 4747

Re: USB 3G modem : ZTE MF667 model

Did anyone got these working?

I am sending a supout.rif to support but our project will force us to replace the modem with another one due to tight scheduleds.

BR.
by NetworkPro
Sun May 18, 2014 10:20 am
Forum: Scripting
Topic: UPnP Multi-WAN
Replies: 4
Views: 4751

Re: UPnP Multi-WAN

I found one solution like this: #global variable is loaded with IDs of Dynamic NAT entries :global UPnPs [/ip firewall nat find dynamic]; #compares IDs with the ones from previous run :if ($UPnPs != $UPnPz) do={ #copies current IDs to secondary variable UPnPz which will be used for comparison on nex...
by NetworkPro
Sun May 18, 2014 2:35 am
Forum: Scripting
Topic: UPnP Multi-WAN
Replies: 4
Views: 4751

UPnP Multi-WAN

Hello, I need some help with a script: I want to put all Dynamic NAT rules in a variable for comparison. I need to execute the below script, in case Dynamic NAT entries have changes. It is about this: http://wiki.mikrotik.com/wiki/UPnP_Multi-WAN foreach i in=([/ip fi nat find dynamic]) do={/ip fi na...
by NetworkPro
Sat May 17, 2014 12:49 pm
Forum: General
Topic: UPnP: "all-ppp" support?
Replies: 2
Views: 3418

Re: UPnP: "all-ppp" support?

No, the prefect time to give UPnP a face lift would have been about 7 to 10+ years ago. I am pissed at the Latvian guys about this as well but I guess experienced developers don't grow on trees and they certainly don't prioritize work on stupid features like UPnP :( Scripting can be used to "dy...
by NetworkPro
Fri May 16, 2014 7:23 pm
Forum: General
Topic: Loopguard
Replies: 34
Views: 31934

Re: Loopguard

Actually CRS crashed and had to be unplugged and plugged back in when I made an L2 loop :)

I had similar problems on a bunch of other routerboard throughout the years :)
by NetworkPro
Mon May 05, 2014 9:53 am
Forum: General
Topic: bridge untagged and tagged from same port NEED FIX YEAR AGO!
Replies: 13
Views: 11553

Re: bridge untagged and tagged from same port NEED FIX YEAR

Single PPPoE Server on Bridge interface. Bridge would have filter on forward, so incoming packets wont be sent out "duplicated" but the PPPoE server will serve vlan0 and other vlans. This is one possible use. Currently to accomplish this - there needs to be a manageable switch in front of ...
by NetworkPro
Tue Feb 25, 2014 1:32 pm
Forum: General
Topic: PCQ limit & total limit settings
Replies: 36
Views: 57155

Re: PCQ limit & total limit settings

should be 2000 for each bro
by NetworkPro
Wed Jan 08, 2014 7:28 pm
Forum: Scripting
Topic: Adaptive Queue Max Limit
Replies: 4
Views: 2757

Re: Adaptive Queue Max Limit

using value of avg rate of local queue would not make sense for such a purpose

more sense would make to lower max based on traffic conditions such as icmp delay if that can be measured with a script.

Going Up with the max limit - probably by hard set scheduled time.
by NetworkPro
Wed Dec 11, 2013 11:30 am
Forum: General
Topic: TX Drops on VLAN Interfaces
Replies: 2
Views: 2201

Re: TX Drops on VLAN Interfaces

Did you find the reason or what did you do to fix this ?

Regards.
by NetworkPro
Wed Dec 11, 2013 10:25 am
Forum: General
Topic: Double QoS for v6 is possible
Replies: 71
Views: 54721

Re: Double QoS for v6 is possible

In my experience such problems are due to performance limitations in the design but mostly configuration issues. I believe RouterOS is quite the miracle already. "QoS" code have been recently improved. You may post your specific configuration in a separate thread if you are comfortable wit...
by NetworkPro
Mon Dec 02, 2013 10:52 am
Forum: General
Topic: Double QoS for v6 is possible
Replies: 71
Views: 54721

Re: Double QoS for v6 is possible

So what is the question exactly and why didn't you make a new thread since this one is for v6?

QoS for Dual-Wan should control the max tx and rx of each WAN.

I don't have time to pay more attention to this at the moment so good luck from me.

Regards.
by NetworkPro
Sat Aug 10, 2013 9:19 am
Forum: General
Topic: Slow 3G connection
Replies: 9
Views: 4682

Re: Slow 3G connection

So the same device does not have a ppp/dial-up connection when used with Windows laptop ? Or it does ?
by NetworkPro
Thu May 09, 2013 6:20 pm
Forum: Wireless Networking
Topic: Wireless disconnected, group key exchange timeout
Replies: 68
Views: 78348

Re: Wireless disconnected, group key exchange timeout

Update: grabbed new driver for client adapter from station-drivers (god bless the french) (updated all drivers on that pc actually not just the wi-fi)

problem fixed :mrgreen:
by NetworkPro
Wed May 08, 2013 9:19 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 43279

Re: v6rc14 released

try connection tracking yes rather than auto and some "ip->settings" tweaks possibly as well
by NetworkPro
Tue May 07, 2013 6:48 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 43279

Re: v6rc14 released

What happend with the HTML files of hotspot ? after I made the upgrade they vanished.

cheers
You will have to copy them from elsewhere with different version or from a backup. In RC14 they are mysteriously missing.
by NetworkPro
Thu May 02, 2013 4:43 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 43279

Re: v6rc14 released

So what big deal with the naming? Are you going to explain what the problem is and CONTRIBUTE or are you going to be annoyed and chatty on the forums?

Time to be annoyed has long passed. Nothing you can do about that.
by NetworkPro
Wed May 01, 2013 10:58 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 43279

Re: v6rc14 released

Intel PRO/1000 (e1000?) VLAN tagging fail :) 2 device="02:01.0" name="82547EI Gigabit Ethernet Controller (rev: 0)" vendor="Intel Corporation" category="Ethernet controller" vendor-id="0x8086" device-id="0x1019" (OnBoard Intel Server Board ...
by NetworkPro
Wed May 01, 2013 10:49 am
Forum: General
Topic: Bridge Ports and VLANs
Replies: 2
Views: 2744

Re: Bridge Ports and VLANs

yeah at least router crash prevention would be nice before v6 final release

later some bridging with vlan0 would also be nice, in a way that prevents user looping their network or shooting themselves in the foot and prevents silly support requests as well
by NetworkPro
Tue Apr 16, 2013 9:54 am
Forum: General
Topic: Double QoS for v6 is possible
Replies: 71
Views: 54721

Re: Double QoS for v6 is possible

Dynamic rates? Setting another queue as the parent of a simple queue will not work for you ?

Looks like the big number of simple queues can safely replace PCQ especially for big number of packets per second?
by NetworkPro
Mon Apr 15, 2013 4:12 pm
Forum: General
Topic: Double QoS for v6 is possible
Replies: 71
Views: 54721

Re: Double QoS for v6 is possible

Cheer up. If there are no crashes and the queues actually work, when v6 final is realease, - you should be able to use the new design to do what you need :)
by NetworkPro
Fri Apr 12, 2013 8:21 am
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

interesting situation - this is a good question so you have a radio network with high pps rates ? If you test the same setup on Gigabit Ethernet what would be the result ? - problem is elsewhere - LLQ is a silly thing pushed by Cl$c0 to increase sales (sleazy weasels can put their marketing up their...
by NetworkPro
Sun Mar 17, 2013 7:07 pm
Forum: Wireless Networking
Topic: Wireless disconnected, group key exchange timeout
Replies: 68
Views: 78348

Re: Wireless disconnected, group key exchange timeout

Problem happens with OpenWRT as well. Switching to cable. Mar 17 18:50:06 OpenWrt daemon.info hostapd: wlan0: STA 08:ed:b9:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) Mar 17 18:50:08 OpenWrt daemon.info hostapd: wlan0: STA 08:ed:b9:xx:xx:xx IEEE 802.11: authenticate...
by NetworkPro
Sun Mar 17, 2013 9:11 am
Forum: Wireless Networking
Topic: Wireless disconnected, group key exchange timeout
Replies: 68
Views: 78348

Re: Wireless disconnected, group key exchange timeout

Yeah my attempts did not work and I did not want to turn on b/g/n to test that.

I want to run OpenWRT trunk on a separate partition now.
by NetworkPro
Thu Mar 14, 2013 9:09 pm
Forum: Wireless Networking
Topic: Wireless disconnected, group key exchange timeout
Replies: 68
Views: 78348

Re: Wireless disconnected, group key exchange timeout

Blah ! Always hard to have fully compatible sh*t! I am trying with this config on MT side: /interface wireless security-profiles add authentication-types=wpa2-psk eap-methods=passthrough group-key-update=3m management-protection=allowed management-protection-key=<PASSWORD> mode=dynamic-keys name=wpa...
by NetworkPro
Sat Mar 09, 2013 7:07 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

Sorry I am unsubscribing from this topic. Good luck to all.
by NetworkPro
Fri Mar 08, 2013 5:30 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

Decent explanation. When doing such things, you do realize that shielding would create a path to ground that you have to manage, right? Any "dirty" electrical currents that travel through that should not be let to interfere with the Ethernet stuff - usually this means - managing to NOT cre...
by NetworkPro
Thu Mar 07, 2013 9:07 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

OK sounds good.

There may be packet-loss when it happens, are you testing by pinging with a fast ping (decreased "timeout" value) ?
by NetworkPro
Thu Mar 07, 2013 6:58 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

wirelessruby's own problems that he blew out of proportion

What solution? You want to replace components on the PCB now?

Ubnt had the tough cable + plugs I think for similar reasons.

So your question is - how to measure, to be sure that the reason is outside the RB such as electrical?
by NetworkPro
Wed Mar 06, 2013 9:52 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

topic is exhausted - replace things
by NetworkPro
Sat Feb 23, 2013 5:30 pm
Forum: Forwarding Protocols
Topic: Cisco is opening up its EIGRP as open standard
Replies: 4
Views: 3370

Re: Cisco is opening up its EIGRP as open standard

Hmmm so what Cisco are doing is setting a challenge for the world's reverse-engineers? To see if the EIGRP could be fully open-sourced by not looking at Cisco's source code but just ripped spec, compiled code and the packets on the wire? Well if an open-source project starts existing, which contains...
by NetworkPro
Fri Feb 15, 2013 3:48 pm
Forum: General
Topic: HotSpot redirects https and the browser shows an SSL error
Replies: 20
Views: 22708

Re: HotSpot redirects https and the browser shows an SSL err

Ah so MikroTik should have done the same/similar ? :)
by NetworkPro
Wed Feb 13, 2013 7:28 pm
Forum: General
Topic: HotSpot redirects https and the browser shows an SSL error
Replies: 20
Views: 22708

Re: HotSpot redirects https and the browser shows an SSL err

Yes.

I wonder if redirection technique exists that would not break https? and if it is accepted as standard in the browsers.
by NetworkPro
Sun Feb 10, 2013 1:34 am
Forum: General
Topic: Tutorials blogs and other helpful RouterOS resources
Replies: 62
Views: 65452

Re: Tutorials blogs and other helpful RouterOS resources

http://wiki.bluecrow.net/index.php/Mikrotik configuration scripts snippets collection (as it should be - on a WiKi) (stumbled upon this by chance)

Hmm no syntax highlighting .... yet ...
by NetworkPro
Fri Jan 18, 2013 5:08 pm
Forum: General
Topic: Add L2TP interface to bridge - how?
Replies: 22
Views: 42696

Re: Add L2TP interface to bridge - how?

yep I do not approve this design though :]
by NetworkPro
Tue Jan 15, 2013 11:07 am
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 15988

Re: Two interface using the same ip subnet

Yep. Pretty awesome, nowadays.
by NetworkPro
Sun Jan 13, 2013 1:00 pm
Forum: General
Topic: Install NIC drivers
Replies: 4
Views: 2222

Re: Install NIC drivers

Increasing the complexity and adding technologies significantly increases the chance of performance degradation, less than optimal results, decreased scalability, usability and people's perception of the any aspect of the whole thing. Unless you are a Virtual Box software developer, then it's your j...
by NetworkPro
Fri Jan 11, 2013 6:29 am
Forum: General
Topic: Install NIC drivers
Replies: 4
Views: 2222

Re: Install NIC drivers

you will have to provide supout rif, or at least if other OS is installed at the moment - export hardware ID info - VID PID that sort of stuff - and send that to MT support otherwise there is high chance your specific board has different chip than what could be found with < favorite web search engin...
by NetworkPro
Fri Jan 11, 2013 6:26 am
Forum: General
Topic: Double QoS for v6 is possible
Replies: 71
Views: 54721

Re: Double QoS for v6 is possible

Any successful configurations in high PPS multi-WAN multi-LAN environments? :) Do not brag - just post the config.
by NetworkPro
Mon Jan 07, 2013 12:48 am
Forum: General
Topic: Slow Upload Speeds on Internet Port
Replies: 41
Views: 41772

Re: Slow Upload Speeds on Internet Port

Alright what was the issue after all man ?
by NetworkPro
Sun Jan 06, 2013 10:38 am
Forum: General
Topic: Slow Upload Speeds on Internet Port
Replies: 41
Views: 41772

Re: Slow Upload Speeds on Internet Port

Do you have any Queues in your config ? ISP can't guarantee anything since they have dozens of peering partners use lot of IP transit providers and path to the destination is dynamic (lot of hops, all under different ownership) - So real Internet. can you test again and this time include traceroute ...
by NetworkPro
Sat Jan 05, 2013 4:32 pm
Forum: General
Topic: Slow Upload Speeds on Internet Port
Replies: 41
Views: 41772

Re: Slow Upload Speeds on Internet Port

This material is no proof of anything. Unless your ISP makes proper engineering measurements (they know and control their network) - you cannot yet prove the issue is in the router that you have. I have 100/100Mbps dedicated ports on a Cisco switches in a DC. Without MT router 100/100 is not an issu...
by NetworkPro
Mon Dec 31, 2012 2:40 pm
Forum: General
Topic: Feature request: https support for fetch command
Replies: 1
Views: 955

Re: Feature request: https support for fetch command

Yes, we want to authenticate ourselves to a proxy with the fetch tool and I think https support will help in some of these cases.

Or is there a better way to auth to a Squid/ISA/Forefront/usual ones ?

Regards.
by NetworkPro
Tue Dec 25, 2012 11:33 pm
Forum: General
Topic: Interface packet Drops on an octacore xeon with intel nics
Replies: 32
Views: 21358

Re: Interface packet Drops on an octacore xeon with intel ni

This stuff here is important in x86 context. Well done martini and macgaiver. Fresh new questions kind of on the topic (also sent to support and waiting optimistic answer): - What Kernel Options / tweaks of this sort (https://help.ubuntu.com/community/BootOptions#Common_Kernel_Options ACPI, APIC, IR...
by NetworkPro
Mon Dec 24, 2012 5:39 pm
Forum: General
Topic: How The Graphs Should Really Look - Maximums and Averages ?!
Replies: 1
Views: 1062

How The Graphs Should Really Look - Maximums and Averages ?!

Hello, Let us start using graphs that are averaged in a way that preserves the real maximum reached bandwidth? Time for average - no more than 3 seconds? Currently the graphs are not very useful for information- how much the traffic was peaking: http://demo2.mt.lv/graphs/iface/ether1/ In order to ma...
by NetworkPro
Fri Dec 07, 2012 2:39 pm
Forum: General
Topic: CoDel support?
Replies: 46
Views: 21062

Re: CoDel support?

Yeah they could give US visibility over what THEY DO but that's not very polite to ask in the first place, with the current surrounding culture.
by NetworkPro
Fri Dec 07, 2012 7:18 am
Forum: General
Topic: v6 rc5 released
Replies: 112
Views: 47295

Re: v6 rc5 released

I have decent experience with the recent RC versions, Thank you MikroTik guys !!! On two mipsbe I put the package from 5th December from the development page, it has RouterBOOT 3.02 , if you could consult with your colleagues and let us know if we can install it on the router OR wait for the next bu...
by NetworkPro
Wed Nov 14, 2012 8:48 am
Forum: General
Topic: PPPOE Server with many connections lags
Replies: 10
Views: 4321

Re: PPPOE Server with many connections lags

What PPP authentication is used ?

Can you show the configuration of the MT that was "replaced" ?

- Lag problem from first post I think is due to Queues. -> How do you limit the users on the new Linux solution?
by NetworkPro
Thu Nov 08, 2012 3:07 pm
Forum: General
Topic: v6 RC2 released
Replies: 98
Views: 41820

Re: v6 RC2 released

add ipid linux: iptables -t mangle -A POSTROUTING -j IPID --ipid-pace 1 routeros how to set? config NETFILTER_XT_TARGET_IPID 385 tristate '"IPID" hoplimit target support' 386 depends on IP_NF_MANGLE || IP6_NF_MANGLE 387 depends on NETFILTER_ADVANCED 388 ---help--- 389 This option adds the...
by NetworkPro
Mon Nov 05, 2012 12:35 pm
Forum: General
Topic: v6 RC2 released
Replies: 98
Views: 41820

Re: v6 RC2 released

no, please do not rely on this "working" because it is not a feature at all. it just uses first added address of interface

use isntedad of masquerade actioon=src-nat and put in the IP that you want
by NetworkPro
Mon Nov 05, 2012 7:45 am
Forum: General
Topic: v6 RC2 released
Replies: 98
Views: 41820

Re: v6 RC2 released

oh-no :D who is using masq with more than 1 IP ? cange to src-nat and paste the IP in there
by NetworkPro
Wed Oct 31, 2012 2:41 pm
Forum: General
Topic: CoDel support?
Replies: 46
Views: 21062

Re: CoDel support?

Codel + no drop option of some of our packets that is enough to begin with and to keep it simple
by NetworkPro
Wed Oct 31, 2012 12:02 pm
Forum: General
Topic: v6 RC2 released
Replies: 98
Views: 41820

Re: v6 RC2 released

If compared fedora 32bit pure routing (no iptables) vs fedora 64 bit which will pass more packets per second while retaining minimal processing delay?
by NetworkPro
Wed Oct 31, 2012 8:09 am
Forum: General
Topic: v6 RC2 released
Replies: 98
Views: 41820

Re: v6 RC2 released

reason is amount of work and amount of testing, driver related work who knows what else that goes on underneath there
by NetworkPro
Tue Oct 30, 2012 2:54 pm
Forum: General
Topic: v6 RC2 released
Replies: 98
Views: 41820

Re: v6 RC2 released

RouterOS x86 is sufficient as 32 bit and it has been stated in the MUMs that there are no plans for x64 version for x86_64.

I am satisfied with the 32 bit version. Why would you need a different one ? Thanks.
by NetworkPro
Tue Oct 30, 2012 11:58 am
Forum: General
Topic: v6 RC2 released
Replies: 98
Views: 41820

Re: v6 RC2 released

6rc2 queues sometimes need disable/enable to make 'em work after tweaking them/after tweaking some small parameter of the queue tree a rb133 disappeared after 6rc3 dev was uploaded to it (was wlan nv2 connection back to us) bridges with vrrps wlan eth and stuff sometimes did not respond to remove co...
by NetworkPro
Sun Oct 28, 2012 8:30 am
Forum: General
Topic: Slow Upload Speeds on Internet Port
Replies: 41
Views: 41772

Re: Slow Upload Speeds on Internet Port

I like short posts - easy to read. RB is tuned out of the box. Speedtest on a website rarely fills up providers' advertised speed. Download many well seeded torrents and see amount on traffic on RB port. p.s. port auto-negotiation issue is not "performance" or "tuning" issue - po...
by NetworkPro
Sat Oct 27, 2012 4:25 pm
Forum: General
Topic: equations that describe packets - A Bandwidth Breakthrough
Replies: 2
Views: 2748

Re: equations that describe packets - A Bandwidth Breakthrou

Good point. I am not subscribed to MIT network related publications and drafts. I don't know if there is a way to be subscribed? An RSS feed?
by NetworkPro
Sat Oct 27, 2012 3:19 pm
Forum: General
Topic: equations that describe packets - A Bandwidth Breakthrough
Replies: 2
Views: 2748

equations that describe packets - A Bandwidth Breakthrough

http://www.technologyreview.com/news/429722/a-bandwidth-breakthrough/ A Bandwidth Breakthrough A dash of algebra on wireless networks promises to boost bandwidth tenfold, without new infrastructure. October 23, 2012 Academic researchers have improved wireless bandwidth by an order of magnitude—not b...
by NetworkPro
Sat Oct 27, 2012 7:25 am
Forum: General
Topic: IMG file for flashing to disk
Replies: 20
Views: 12175

Re: IMG file for flashing to disk

I use this method - its faster and more predictable. This will be the install stage - fat32 with the npk files right?
by NetworkPro
Tue Oct 23, 2012 7:21 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 45109

Re: NEW PRODUCT - Cloud Core Router

Only opennesses we need is to put three routers in a lab and test the one in the middle with Traffic Generator. We put our heavy config on it and test if it will pass all the packets without loss , out of order and weird delays. Then we know we have true power. And we go to celebrate after that.
by NetworkPro
Sun Oct 21, 2012 7:14 pm
Forum: General
Topic: Broken SFQ
Replies: 9
Views: 3304

Re: Broken SFQ

Cool man. Let us know if you discover an interesting useful HTB setup. Thank you.
by NetworkPro
Sun Oct 21, 2012 2:36 pm
Forum: General
Topic: Broken SFQ
Replies: 9
Views: 3304

Re: Broken SFQ

Why would you put these types of packets into a 128 packet sized queue that gives only sfq-allot bytes of transmission on each RR cycle?

Have you tough of some actually useful benefit of this?
by NetworkPro
Sat Oct 20, 2012 3:31 am
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

I figured out the answer to my question two posts above http://forum.mikrotik.com/viewtopic.php?p=338374#p338374 . The router forwards at the gigabit speed and sends the frames to the 100 megabit NIC. The NIC buffer fills and tail-drop occurs there. We prevent this by having a HTB that will drop 9 o...
by NetworkPro
Fri Oct 19, 2012 9:26 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 45109

Re: NEW PRODUCT - Cloud Core Router

How much pps will we get if we put all of the packets through HTB or are we going to have hardware HTB already? :oops: :twisted:
by NetworkPro
Thu Oct 18, 2012 4:14 pm
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

its a dev build I've asked them via e-mail if they do not reply I assume they are working on it.
by NetworkPro
Thu Oct 18, 2012 3:40 pm
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

We can use address-list to mark packets and use the packet mark for SQs :D
by NetworkPro
Thu Oct 18, 2012 3:02 pm
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

Test this when stable v6 gets out. ;)
by NetworkPro
Thu Oct 18, 2012 2:43 pm
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

We can use SQ for a subnet with queue type PCQ.
by NetworkPro
Thu Oct 18, 2012 1:32 pm
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

We have this choice I agree with having freedom to choose. The Simple Queues have a parent setting so all client's SQs will be under one parent, this way they should reach the max-limit of their parent. This is just again HTB "Queue Tree" structure but it was called "Simple Queue"...
by NetworkPro
Thu Oct 18, 2012 9:55 am
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

I believe if we put a Queue Tree on the LAN interface for Download customers max-limit, one Queue Tree on the WAN interface for upload customers max-limit we will still have the Global to put two more Queue Trees - one for upload QoS and one for Download QoS. (separate upload/download packet marks n...
by NetworkPro
Thu Oct 18, 2012 12:49 am
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

Queue Tree max=-limit=the max limit of the WAN connection -Gaming / limit-at=3Mbps / queue type: default-small -Streaming Video (netflix) /limit-at=1-2 streams at the same time/ queue type: default / priority=1 -Browsing-High (first Xmb of connection) / queue type: PCQ /priority=2 -HTTP downloads / ...
by NetworkPro
Wed Oct 17, 2012 11:50 pm
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

I think you can attach the Queue Trees on the interfaces HTBs + Global (mark unidirectional).
by NetworkPro
Wed Oct 17, 2012 7:37 pm
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

We do not reorder. We discard. We do not have conditions for reordering. Ethernet is a serial technology - one frame at a time, with decently low latency on Gigabit and up. MikroTik RouterBOARDs and x86 routers send out packets at Ethernet speeds. If outgoing is 100Mbps and incoming is a flood of 10...
by NetworkPro
Wed Oct 17, 2012 5:22 pm
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

rarely a solution - very custom I would say No to this Thank you for bringing it up.
by NetworkPro
Wed Oct 17, 2012 12:32 pm
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 5965

Re: My Story with PCQ .. and high latency

the queue-ing delay is because of the current configuration v6 will not "fix the issue" I bet 10 levas. You can on the other hand "fix the issue" now. instead of like this name="Basic Down" kind=pcq pcq-rate=80k pcq-limit=50 pcq-classifier=dst-address pcq-total-limit=20...
by NetworkPro
Tue Oct 16, 2012 11:31 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

So after you did this you do not have more port-flap? :) Please do a sniff of the traffic that you believe might have caused an issue and send it to support. Thank you.
by NetworkPro
Tue Oct 16, 2012 5:06 am
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

You should be able to do what you want/need/have now in v5 with the new v6. Please give us the goals of the current Queue Tree/paste current current Queue Tree configuration and we will assist.
by NetworkPro
Mon Oct 15, 2012 5:00 pm
Forum: General
Topic: RouterBoard having issues .. CANT REBOOT?!
Replies: 3
Views: 1108

Re: RouterBoard having issues .. CANT REBOOT?!

if you're sure it is a bug - take it to support (send them an e-mail with the supout.irf file)
by NetworkPro
Mon Oct 15, 2012 11:25 am
Forum: General
Topic: Weird initial boot of rb711-5HnD boards
Replies: 4
Views: 1432

Re: Weird initial boot of rb711-5HnD boards

If it beeps (correction per below post by Normis: I mean when it beep-beeps not beep-jrrps) - it is running, if its brand new - it has default config which should be working. Therefore, ff no connection after beep - cabling / Ethernet issue that usually is solved by reconnecting Ethernet port. It co...
by NetworkPro
Mon Oct 15, 2012 11:22 am
Forum: General
Topic: Slow Upload Speeds on Internet Port
Replies: 41
Views: 41772

Re: Slow Upload Speeds on Internet Port

Configuration and/or cabling issue.

P.S. and/or capacity (not)planning issue
by NetworkPro
Mon Oct 15, 2012 11:16 am
Forum: General
Topic: Winbox wont always connect, usaully can still HTTP
Replies: 17
Views: 3885

Re: Winbox wont always connect, usaully can still HTTP

WinBox not working - try this http://forum.mikrotik.com/viewtopic.php ... 18#p337918

memory is consumed - turn off Web Proxy and use latest stable relese version. If prolem still happens - make supout.rif and send to support as "memory leak bug report".

rgrds
by NetworkPro
Mon Oct 15, 2012 11:10 am
Forum: General
Topic: rb750up, cant get in using winbox(webfig yes)
Replies: 2
Views: 1551

Re: rb750up, cant get in using winbox(webfig yes)

Nothing to worry about. I change mine from the default 8291 to something else and do not have such problem. It may happen if UPnP dynamic DNS rule takes over this port. It may happen without visible reason sometimes (probably malicious packets hit the port and broke the service). In this case - log ...
by NetworkPro
Mon Oct 15, 2012 11:05 am
Forum: General
Topic: RouterBoard having issues .. CANT REBOOT?!
Replies: 3
Views: 1108

Re: RouterBoard having issues .. CANT REBOOT?!

Reinstall with NetInstall, (clean the config). Update the bootloader(firmware) and try again. Use latest RouterOS (5.21 at this time).

Good luck!
by NetworkPro
Sun Oct 14, 2012 9:43 pm
Forum: General
Topic: Suggestion: Filter rule logs
Replies: 1
Views: 1397

Re: Suggestion: Filter rule logs

There are workarounds/MirkroTik's own way for these purposes at the moment. Before a filter rule you can have the same rule with action=log and log prefix so it will be available in the logs. I use this a lot. Instead of port lists at the moment you can put a lot of ports in a single firewall rule. ...
by NetworkPro
Sun Oct 14, 2012 9:36 pm
Forum: General
Topic: [FEATURE REQUEST] Two Factor Authentication
Replies: 53
Views: 38816

Re: [FEATURE REQUEST] Two Factor Authentication

I can see how this can be useful. I am with you buddy.
by NetworkPro
Sun Oct 14, 2012 9:22 pm
Forum: General
Topic: HOW TO BLOCK PROXY ON INTERNET TO BROWSE FACEBOOK
Replies: 2
Views: 1971

Re: HOW TO BLOCK PROXY ON INTERNET TO BROWSE FACEBOOK

The quickest and easiest way is to use OpenDNS account for your company router and do a redirect of the DNS queries to your MT. I think OpenDNS has proxy category. Another option is to allow the users to be playful (including facebook/whatever) during work hours considering their tasks are done. Sho...
by NetworkPro
Sat Oct 13, 2012 5:42 pm
Forum: General
Topic: Why is 5.21 missing?
Replies: 12
Views: 6598

Re: Why is 5.21 missing?

lol dont worry man its not a problem that those empty files (fake as you put it) exist on the server and we can hit their URLs by manually requesting it 5.21 is not released no one is forcing us download empty files Monday normal work time someone will fix that stuff. And rebuild/release/put on deve...
by NetworkPro
Sat Oct 13, 2012 2:37 pm
Forum: General
Topic: Why is 5.21 missing?
Replies: 12
Views: 6598

Re: Why is 5.21 missing?

Try this one http://www.sendspace.com/file/6lqbn9 Package Built Oct/10/2012 12:19:33 if something breaks - the person who installed it will take responsibility because this is a development test version which has not been released. I've tested it only on RB450G.
by NetworkPro
Sat Oct 13, 2012 1:19 pm
Forum: General
Topic: Why is 5.21 missing?
Replies: 12
Views: 6598

Re: Why is 5.21 missing?

It may have been dangerous. Have you tried 6.0rc2 that is on there ? I think it works... except if some Ethernet drivers are not in it for x86 platform.
by NetworkPro
Sat Oct 13, 2012 12:52 pm
Forum: General
Topic: UPnP and NAT-PMP
Replies: 13
Views: 10846

Re: UPnP and NAT-PMP

It would be great to have the same features as seen here in Tomato Firmware: upnpnat.jpg http://forum.mikrotik.com/download/file.php?id=8608 Can we please have decent/best in world UPnP already ? I am talking about making it usable in ISP/Wireless ISP environments with higher requirements about sec...
by NetworkPro
Sat Oct 13, 2012 1:47 am
Forum: General
Topic: v6.0beta3 x86 - lost ethernet interface, driver issue?
Replies: 5
Views: 4094

Re: v6.0beta3 x86 - lost ethernet interface, driver issue?

RTL8111 driver missing in 6rc2 2012.10.12 x86 as well. Supouts submitted to Support as test reports

I had access to the router over other interface + backup before test upgrade so I was able to restore previous version in 3 reboots.
by NetworkPro
Fri Oct 12, 2012 3:51 pm
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

Dual Queue-ing/shaping is Real until v6 where we have Global instead of Global-In/-Out/-Total . If user hel above do not believe this then he can do/go whatever/wherever he wants, no one cares.
by NetworkPro
Fri Oct 12, 2012 12:00 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

Thank you. I trust MikroTik have their up/down detection right. Netgear example is hardware issue. Good post still every case is specific. I can agree that if you put electronic components in a plastic sealed box and overheat them (in the sun included) then anything on the PCB may become damaged. Re...
by NetworkPro
Fri Oct 12, 2012 10:47 am
Forum: General
Topic: My RouterOS arp-spoofing
Replies: 1
Views: 1597

Re: My RouterOS arp-spoofing

Do you have HotSpot on the interface with that MAC ?
by NetworkPro
Fri Oct 12, 2012 10:32 am
Forum: General
Topic: Question about global in queue tree V6.x
Replies: 41
Views: 40623

Re: Question about global in queue tree V6.x

Janis gives this info here http://tiktube.com/video/IJfq3ioIeGIoDEmloCFvJrFuIlooDIpK= I support MikroTik with their optimisation decision. We can do fine without dual queue-ing in one box. Janis' dual QoS with PCQ can be re-invented to a single step solution - just put the PCQ as a queueing in the f...
by NetworkPro
Fri Oct 12, 2012 10:29 am
Forum: General
Topic: Version 6.0rc1 does not support past network cards
Replies: 12
Views: 5026

Re: Version 6.0rc1 does not support past network cards

its work in progress, I like the 6.0rc2 from today available from the dev testing page in your mikrotik.com account upon request from support I havent tested on x86 though..
by NetworkPro
Fri Oct 12, 2012 9:20 am
Forum: General
Topic: Bandwidth distribution w/ individual queue graphs
Replies: 16
Views: 29597

Re: Bandwidth distribution w/ individual queue graphs

Yes. You do not see how. I do because I have more information. I am giving you the relevant. The problem that you have can not be solved with RouterOS. You would be needing a WAN optimisation solution. The piece of software I recommended - I have tested. Pirate it for all I care.
by NetworkPro
Fri Oct 12, 2012 7:03 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

The described flapping is rare so that hardware Quality Assurance did not even think of doing such test or they can't even reproduce such harsh environment to do such test. So the statement "poorly designed/cheap" is not one I would use because this problem exists on the competition's ~20-...
by NetworkPro
Thu Oct 11, 2012 9:02 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

I read page 1 and 3 of this thread. I had most port flaps and issues in my experience due to RJ45 plug being smaller than the port or the port being too deep for the plug to have 100% contact every time. Such patch cables I destroyed fully and chucked in the bin. I never bought cheap patch cables an...
by NetworkPro
Thu Oct 11, 2012 4:07 pm
Forum: General
Topic: Bandwidth distribution w/ individual queue graphs
Replies: 16
Views: 29597

Re: Bandwidth distribution w/ individual queue graphs

Have you tried to put all users through a Windows PC with cFosSpeed and no other queues and limitations after that ? This PC can be Intel Atom 14W. You can have a slow and useful proxy in another 14W consumption. You can let your buddies test these on 3g ~ same variable bandwidth situation and send ...
by NetworkPro
Thu Oct 11, 2012 3:06 pm
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 45109

Re: NEW PRODUCT - Cloud Core Router

Can I make labs with each core running a separate RouterOS configuration, IP adresses etc? By connecting for example eth1 with eth2 so on to simulate many routers connected together?

This would be useful for everyone to test MPLS etc before implementing it in the production network :)
by NetworkPro
Thu Oct 11, 2012 12:05 am
Forum: General
Topic: new 'none' queue type
Replies: 21
Views: 8735

Re: new 'none' queue type

I think its this stuff right here ? http://www.google.com/search?q=codel+site%3Akernel.org
by NetworkPro
Wed Oct 10, 2012 9:04 pm
Forum: General
Topic: traffic get stuck for some seconds
Replies: 3
Views: 1450

Re: traffic get stuck for some seconds

give leaf with limit-at to the dedicated customer in a queue tree that has other leafs for the other clients and manages all traffic, read this http://wiki.mikrotik.com/wiki/NetworkPro_on_Quality_of_Service and ask here if it leaves unanswered questions do not worry about the holes in the WinBox gra...
by NetworkPro
Wed Oct 10, 2012 8:59 pm
Forum: Forwarding Protocols
Topic: MT MPLS Capabilities
Replies: 13
Views: 5203

Re: MT MPLS Capabilities

I hear there are specific telephony boxes that do this conversion to Ethernet at least - for a number of lines/simultaneous calls whatever its called.
by NetworkPro
Wed Oct 10, 2012 8:07 pm
Forum: General
Topic: new 'none' queue type
Replies: 21
Views: 8735

Re: new 'none' queue type

Why do we still have wireless-default (SFQ) as the default on the Wi-Fi interface in v5.21 2012.10.10 ?

I think we should now have 1. codel queue (as best option) plus 2. only-hardware-queue as second best ?
by NetworkPro
Wed Oct 10, 2012 7:37 pm
Forum: Forwarding Protocols
Topic: MT MPLS Capabilities
Replies: 13
Views: 5203

Re: MT MPLS Capabilities

This is to enable legacy voice to be transported over Ethernet, right ? For telecoms interconnections etc ?
by NetworkPro
Tue Oct 09, 2012 10:21 pm
Forum: General
Topic: Problems with units bricking during upgrades
Replies: 4
Views: 1872

Re: Problems with units bricking during upgrades

When I read your reply I have condensation in my mind, I don't know if that sounds logical though.
by NetworkPro
Tue Oct 09, 2012 10:18 pm
Forum: General
Topic: Feature request - TCP optimalization
Replies: 7
Views: 3941

Re: Feature request - TCP optimalization

Can you demo this in a youtube video or something because still a bit mystical. Awesome if it delivers whats promised though, a must have for VSATs and 3g setups.
by NetworkPro
Tue Oct 09, 2012 10:02 pm
Forum: General
Topic: Bandwidth distribution w/ individual queue graphs
Replies: 16
Views: 29597

Re: Bandwidth distribution w/ individual queue graphs

Sorry if this sounds crazy, but have you tried a Windows PC to be the VSAT gateway and to have cFosSpeed turned On on that PC? After this PC you can have a RouterBOARD for max-limit per user and additional control. Not to mention you need a web proxy. P.S. and three more VSAT accounts to loadbalance...
by NetworkPro
Tue Oct 09, 2012 9:45 pm
Forum: General
Topic: understanding traffic
Replies: 2
Views: 1011

Re: understanding traffic

please screenshot of wireshark window with unwanted traffic
by NetworkPro
Tue Oct 09, 2012 9:42 pm
Forum: General
Topic: Please check my mangle and qt and help to make it better....
Replies: 6
Views: 1944

Re: Please check my mangle and qt and help to make it better

Hello,

If this does not explain it all http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service

I will redact it to include answers to your specific questions, if you have any.

Thanks.
by NetworkPro
Tue Oct 09, 2012 9:39 pm
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 5965

Re: My Story with PCQ .. and high latency

Thanks for pointing this out Same issue here http://forum.mikrotik.com/viewtopic.php?p=336987#p336987 I believe I can come up with a Queue Tree that has PCQ for user max-limit just in its low priority part so that we achieve QoS for some of users packets while treating the rest "download" ...
by NetworkPro
Tue Oct 09, 2012 9:30 pm
Forum: General
Topic: Priorize ICMP
Replies: 2
Views: 1895

Re: Priorize ICMP

Sorry if too late but read this http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service and if you have any additional question -ask.
by NetworkPro
Tue Oct 09, 2012 9:22 pm
Forum: General
Topic: Bridging WAN interfaces
Replies: 4
Views: 3158

Re: Bridging WAN interfaces

Yes. RouterOS provides best NAT compared to anything else out there even 20 times the price. RouterOS can NAT a connection back out the interface it came in, masking the source to be the router's IP address. Example: /ip firwall nat add chain=dstnat action=dst-nat in-interface=WAN src-address=<conne...
by NetworkPro
Tue Oct 09, 2012 9:08 pm
Forum: General
Topic: Can RouterOS do Broadband Bonding / WAN Virtualization ?
Replies: 8
Views: 4596

Re: Can RouterOS do Broadband Bonding / WAN Virtualization ?

Use PCC - one (TCP, UDP) connection will occupy one of each loadbalanced WAN link. If you want one connection to go up to the combined bandwidth - you can do tests with having a RouterBOARD on the other end of the WAN links as well and do "bonding" of tunnels. If you have jitter - bonding ...
by NetworkPro
Tue Oct 09, 2012 9:02 pm
Forum: General
Topic: help needed, speciel setup
Replies: 2
Views: 1050

Re: help needed, speciel setup

When you bridge - put in filters for dhcp in the bridge (forward).

Put your own DHCP server on the bridge interface itself.

Put more filters (output) not to allow your own DHCP onto someone else's network (where that other DHCP that you are alredy blocking is).

Simple.
by NetworkPro
Tue Oct 09, 2012 8:53 pm
Forum: General
Topic: Changing PPPoE Mikrotik-Rate-Limit with CoA
Replies: 2
Views: 1549

Re: Changing PPPoE Mikrotik-Rate-Limit with CoA

you can script on RouterOS itself , the script to change a queue at specific time is simple

what event will trigger the change in your case ?
by NetworkPro
Tue Oct 09, 2012 8:51 pm
Forum: General
Topic: Question about how to proceed.
Replies: 2
Views: 882

Re: Question about how to proceed.

this question is not specific to be provided an answer

sounds like you need general IPSEC assistance

If you managed to get it to work - please paste here the configuration on both sides so others can learn from it - remove any password and private IPs.
by NetworkPro
Tue Oct 09, 2012 8:47 pm
Forum: General
Topic: Problem with VoIP Server Over mikrotik
Replies: 4
Views: 2165

Re: Problem with VoIP Server Over mikrotik

You don't need to NAT the VPN clients, they can be routed to the VoIP soft-pbx.

Give karma if this helped :lol:
by NetworkPro
Tue Oct 09, 2012 8:44 pm
Forum: General
Topic: Problems with units bricking during upgrades
Replies: 4
Views: 1872

Re: Problems with units bricking during upgrades

I think rebooting first before uploading the npk is better then uploading npk and rebooting. First reboot step may help clean out any bugs, memory leaks, whatever, before the second reboot for the actual installation of the new version. The bricked boards can be reinstalled with NetInstall and work ...
by NetworkPro
Tue Oct 09, 2012 8:38 pm
Forum: General
Topic: Dropped and errored packets (i beleve due to irq)
Replies: 1
Views: 1100

Re: Dropped and errored packets (i beleve due to irq)

Did you turn off RPS and turn on multi-cpu ? -this I think may relate to the issue
by NetworkPro
Tue Oct 09, 2012 8:35 pm
Forum: General
Topic: Feature request - TCP optimalization
Replies: 7
Views: 3941

Re: Feature request - TCP optimalization

From Aug to now, did you have any hiccups or did the server require any software maintenance to run smoothly? Are you still recommending it? For how many clients ? Thanks.
by NetworkPro
Tue Oct 09, 2012 9:18 am
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

Yes I did do that. That part worked. It was the later step that failed when I click Install.
by NetworkPro
Mon Oct 08, 2012 6:48 pm
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

I have a VMware thing installed.
by NetworkPro
Mon Oct 08, 2012 5:35 pm
Forum: General
Topic: Mikrotik & SQUID / Full Bandwidth Utilization problem
Replies: 3
Views: 1459

Re: Mikrotik & SQUID / Full Bandwidth Utilization problem

Last time I had ideas about squid sending out requests with different IPs and some 1:1 nat but that meant lower limited number of users.
by NetworkPro
Mon Oct 08, 2012 5:10 pm
Forum: General
Topic: Real world QOS - tips and tricks
Replies: 12
Views: 8439

Re: Real world QOS - tips and tricks

During this time I became an authority on MirkroTik QoS. Being any expert, do you have any recommendations for getting QoS to work properly on an N-Streme link? If there is queueing (latency) in your particular link - for reasons of aggregations and such - then I recommend marking a little bit of p...
by NetworkPro
Mon Oct 08, 2012 4:30 pm
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

Wait - you mean when we put in a Rate limit in the PCQ ? I remember back in the day when the dual QoS first came out I just put the PCQ as the queue in the first step solving this problem and shifting it to a problem of not specific user limit :D . :) Sorry I had forgotten about this :) Thanks for b...
by NetworkPro
Mon Oct 08, 2012 3:58 pm
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

We drop low priority packets before they get to the PCQ to cause queueing and dropping of the high priority ones. This is the two setp QoS that Janis Megis gave us.
by NetworkPro
Mon Oct 08, 2012 3:28 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

Nice one. I have to test this and sniff it to be able to know for sure.

I have faith in MikroTik such that such silly problem should not f. with the RouterBOARD. :)
by NetworkPro
Mon Oct 08, 2012 3:25 pm
Forum: General
Topic: How to turn on "flow control"
Replies: 3
Views: 9235

Re: How to turn on "flow control"

Yes nice nice.

Read here http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service

and I hope you achieve higher quality there.

Ask if you have any question.
by NetworkPro
Mon Oct 08, 2012 2:46 pm
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

I understand your two posts now. I am able to put the PCQ queueing in slightly different perspective now - it's like "bufferbloat". In this case we have to drop rather than queue stuff in PCQ, right ? Let's put the priority packets in another queue which has nice limit-at setting. Is this ...
by NetworkPro
Mon Oct 08, 2012 2:12 pm
Forum: General
Topic: bind a microtik to another microtik
Replies: 1
Views: 838

Re: bind a microtik to another microtik

Ensure Layer 2 connectivity to the interface that the HotSpot is running on.

VLANs and Bridges is cleaner than EoIP and bridges.

If you bridge stuff on Layer 2 - put filters on the bridge so that the separate L2 segments talk to the HotSpot only and not to eachother over that bridge.
by NetworkPro
Mon Oct 08, 2012 2:10 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

lol I do not believe - an application triggering port flap ?

Can you reproduce it every time to be sure that the app causes it? (With its specific packets probably)
by NetworkPro
Mon Oct 08, 2012 2:08 pm
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

Which is? I tried with Compatibility mode.
by NetworkPro
Mon Oct 08, 2012 2:05 pm
Forum: General
Topic: DHCP Simple Queue
Replies: 10
Views: 4029

Re: DHCP Simple Queue

Ah sorry about that man. I do not have a nice clean solution for looking at individual IPs' graphs.

Maybe MikroTik can make some statement about how Simple Queues in v6 will help with this?
by NetworkPro
Mon Oct 08, 2012 1:35 pm
Forum: General
Topic: bytes count not equal
Replies: 1
Views: 867

Re: bytes count not equal

Different part of the whole packet is counted on each? Different number of packets are counted on each? No one ever cared so no one ever compared the values? :)
by NetworkPro
Mon Oct 08, 2012 12:24 pm
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

Thanks for the reply. Let's see if we can not miss each other's point so that we all get what is the truth rather than something we think we can imagine. The VoIP/gaming/ packets arrive in between other packets as they were put on the wire by customers PC. Before we can reorder packets in the router...
by NetworkPro
Mon Oct 08, 2012 11:54 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

Interference may come from, let's say - someone testing new digital TV transmitter - and can cause discrepancy of the Ethernet such that lower level software decides to flap the port. It was not noticed before because for example that lower level code may be just dropping frames rather than flapping...
by NetworkPro
Mon Oct 08, 2012 11:38 am
Forum: General
Topic: DHCP Simple Queue
Replies: 10
Views: 4029

Re: DHCP Simple Queue

Sorry for butting in but I prefer a nice clean Queue Tree with PCQ for example. No Simple Queues and no scripts - we do not need to make life harder than it is.
by NetworkPro
Mon Oct 08, 2012 11:20 am
Forum: General
Topic: Happy with your purchase?
Replies: 32
Views: 7655

Re: Happy with your purchase?

LOL Cisco TAC have closed issues in such a silly way that the truth is in our own ability to solve our problem rather than someone else's.

But if you found happiness in using 2911 and dumping trucks of gold and diamonds on Cisco - then good for you ;)
by NetworkPro
Mon Oct 08, 2012 11:07 am
Forum: General
Topic: PPPoE Flooding / Network Flooding - VLAN
Replies: 1
Views: 1151

Re: PPPoE Flooding / Network Flooding - VLAN

VLAN per customer - nice level of control, yes.

Recently there have been client routers which put weird stuff on the broadcast domain. It looked like DoS attack. (Tenda, TP-Link..)

We replaced those client routers with RB750 etc and everything was fine :)
by NetworkPro
Mon Oct 08, 2012 11:03 am
Forum: General
Topic: my device think add fucntion reset routeros
Replies: 1
Views: 841

Re: my device think add fucntion reset routeros

If you want one button reset on x86, the common way to give hardware commands to a router is through the serial port. This may involve hardware solution that would execute a script in RouterOS to set the configuration to what you want to reset to. Another cool thing is SMS to execute a script when y...
by NetworkPro
Mon Oct 08, 2012 10:59 am
Forum: General
Topic: QoS, Queues: Specific theory questions
Replies: 3
Views: 1547

Re: QoS, Queues: Specific theory questions

Excellent. I have modified this stuff http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service to represent the actual truth while having relevant useful information.

High five!
by NetworkPro
Mon Oct 08, 2012 10:53 am
Forum: General
Topic: NO limit queue for National exchange
Replies: 1
Views: 840

Re: NO limit queue for National exchange

This is a good question. http://wiki.mikrotik.com/wiki/NetworkPro_on_Quality_of_Service I would mark the local traffic by having a nice big address-list with all the local (country/exchange) subnets. Then I would use a Queue Tree to manage that traffic together with the rest. To keep the customers h...
by NetworkPro
Mon Oct 08, 2012 10:47 am
Forum: General
Topic: Skype has about 100kbs bandwidth constantly
Replies: 1
Views: 784

Re: Skype has about 100kbs bandwidth constantly

Good question. Looks like portforward issue to me. Directly to the PC - the 1.5Mbps connection is probably directly to the receiver. Where as behind the RB whcih has NAT - the connection is not the same type. With NAT - try UPnP - it has proven useful at multiple setups that I have built and configu...
by NetworkPro
Mon Oct 08, 2012 10:41 am
Forum: General
Topic: How to turn on "flow control"
Replies: 3
Views: 9235

Re: How to turn on "flow control"

Oh no please do not turn on Flow Control.

Please turn it OFF everywhere.

Are they joking with this stuff?

How did the problem affect loss and latency and capacity?

What are these parameters now that you supposedly have Flow Control?
by NetworkPro
Mon Oct 08, 2012 10:22 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 116770

Re: New Ethernet port flap issue enquiery, PLS JOIN!

I didnt read 100% of this thread but do you guys protect the port from interference on the frequencies Ethernet and GigabitEthernet operate on? I would not expect stable behaviour unless shielded cable is used (may not be grounded I think not to create a path for any lightning) as well as the board ...
by NetworkPro
Mon Oct 08, 2012 9:57 am
Forum: General
Topic: IPv6 flood_router6 attack - Router advertisement Guard
Replies: 3
Views: 3511

Re: IPv6 flood_router6 attack - Router advertisement Guard

Nice one. What did support say? Do you have the "Submit this post as a bug report to MikroTik Technical Support:" checkbox at the top of a Newpost ?
by NetworkPro
Mon Oct 08, 2012 7:43 am
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

Hello guys.

If we think about it in a simple way, the strict prio/LLQ will make a sub-millisecond difference some of the time. Do we really need something like this?

If you read this http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service do you have any further questions?

Thank you.
by NetworkPro
Mon Oct 08, 2012 6:59 am
Forum: General
Topic: Frquently link up/down
Replies: 5
Views: 2096

Re: Frquently link up/down

Whats the auto-negotiation setting of the device on the other end of that port?
by NetworkPro
Mon Oct 08, 2012 6:56 am
Forum: General
Topic: Broken SFQ
Replies: 9
Views: 3304

Re: Broken SFQ

What about 5.20 ?
by NetworkPro
Sun Oct 07, 2012 8:33 pm
Forum: General
Topic: Frquently link up/down
Replies: 5
Views: 2096

Re: Frquently link up/down

Did you have the router bootloader (firmware) upgraded?
by NetworkPro
Sun Oct 07, 2012 8:29 pm
Forum: General
Topic: Block the freegate
Replies: 6
Views: 4651

Re: Block the freegate

If you could make a packet capture of the client traffic who is launching and connecting with this application, maybe we could look at that and figure out what to block safely.
by NetworkPro
Sun Oct 07, 2012 8:21 pm
Forum: General
Topic: PPPOE Server with many connections lags
Replies: 10
Views: 4321

Re: PPPOE Server with many connections lags

Test any machine with:

- only one GigabitEtherent interface on PCI-e bus connected to a Switch with VLANs
- turned off multi-threading in the BIOS and turned off multi-cpu in RouterOS

do not use Simple Queues and dynamic stuff

Report back.
by NetworkPro
Sun Oct 07, 2012 8:17 pm
Forum: General
Topic: Queue is not working fine with high bandwidth
Replies: 1
Views: 941

Re: Queue is not working fine with high bandwidth

What does the ping look like when the speed reduces?

After you read this and apply the know-how to your setup, do you find a solution? http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service

Thank you.
by NetworkPro
Sun Oct 07, 2012 8:04 pm
Forum: General
Topic: PPPoE Queue
Replies: 1
Views: 2544

Re: PPPoE Queue

Use a Queue Tree. http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service use this as information and if you have any question - ask here.
by NetworkPro
Sun Oct 07, 2012 4:19 pm
Forum: General
Topic: Best Quad NIC for MT server
Replies: 14
Views: 4850

Re: Best Quad NIC for MT server

Full height.
by NetworkPro
Sun Oct 07, 2012 4:10 pm
Forum: General
Topic: Password Changed by Copy Paste from MS Excel and Lost
Replies: 4
Views: 1375

Re: Password Changed by Copy Paste from MS Excel and Lost

So MikroTik will adjust WinBox to auto-strip any formatting and trailing spaces in the future?
by NetworkPro
Sun Oct 07, 2012 4:07 pm
Forum: General
Topic: Slow 3G connection
Replies: 9
Views: 4682

Re: Slow 3G connection

compare pings between the two setups while downloading one single file
by NetworkPro
Sun Oct 07, 2012 4:05 pm
Forum: General
Topic: Broken SFQ
Replies: 9
Views: 3304

Re: Broken SFQ

RouterOS version, screenshot and what do you mean DRR?
by NetworkPro
Sun Oct 07, 2012 3:59 pm
Forum: General
Topic: PPPoE Queues not limiting traffic
Replies: 1
Views: 989

Re: PPPoE Queues not limiting traffic

Hello,

Why use dynamic simple queues when you can have the most awesome queue tree in the world?

Before you ask 100 questions check this information http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service and ask any additional question you may still have here.

Thanks.
by NetworkPro
Sun Oct 07, 2012 3:01 pm
Forum: General
Topic: How to setup a dedicated bandwidth in MK router
Replies: 1
Views: 1973

Re: How to setup a dedicated bandwidth in MK router

Hello,

After you read this http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service do you have any further questions?

Thanks.
by NetworkPro
Sun Oct 07, 2012 2:56 pm
Forum: General
Topic: Only 55Mb on a 70Mb internet connection
Replies: 5
Views: 1772

Re: Only 55Mb on a 70Mb internet connection

Use fast ping to hunt for packet loss and delay that may interfere with TCP.

After you read this http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service do you have any additional questions?
by NetworkPro
Sat Oct 06, 2012 11:11 am
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

http://www.mikrotik.com/download/share/routeros-mipsbe-6.0rc2.npk do not use this version as if something breaks there would be the person who installed it to blame. Its not released at all. unpredicted behaviour report: with arp disabled and a static arp entry in place, dhcp client does not work pr...
by NetworkPro
Wed Oct 03, 2012 12:47 pm
Forum: Wireless Networking
Topic: Interface HTB - hidden buffer
Replies: 44
Views: 18002

Re: Interface HTB - hidden buffer

Does anyone have MirkoTik's official plans on Codel/their own better queue? I haven't e-mailed them yet about this...

OndrejSkipala, can you find a solution to lower the latency of your setup to a usable level in my WiKi article: http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service ?
by NetworkPro
Tue Oct 02, 2012 8:59 pm
Forum: General
Topic: Feature request: Easy setting for load balancing
Replies: 1
Views: 1663

Re: Feature request: Easy setting for load balancing

Would be nice to have dual WAN loadbalancing built into QuickSet this way a RouterBOARD can be sold to sit in front of users' home routers. Otherwise they would have to give someone like me let's say PayPal cash to help them out with a dual WAN config.
by NetworkPro
Tue Oct 02, 2012 10:48 am
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

RB450G 2009-ish hw rev., bootloader 2.41/latest with its config - reset and over-clocked to 800 (active cooling) RB is powered by 12 volt ATX PSU I ran NetInstall.exe as Administrator , turned On the NetBoot option, I put in an IP address that is within the subnet that I have on the NIC TCP/IPv4 con...
by NetworkPro
Tue Oct 02, 2012 7:54 am
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

Last night I lost 2 hours before I realised that NetInstall does not work on Windows 8 (rather XP). This is exactly the sort of thing that can get frustrated users running around and complaining. It is very easy to get the users in this mode especially when they are used to things just working like ...
by NetworkPro
Tue Sep 25, 2012 3:54 pm
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

There is no problem on mine as well. As I said - when I turn on the sniffer - rx drops are not counted.

MT guys If you want - I will give you access to upload your debug stuff and do whatever you want (without killing the hardware) with the RB.
by NetworkPro
Tue Sep 25, 2012 1:28 pm
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

Anyone losing and having to restart the routerboard when playing with arp entries (not of the IP we are connected from) ?
by NetworkPro
Tue Sep 25, 2012 12:16 am
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

Some stuff you have to see if enabled as packages and reconfigure I think.
by NetworkPro
Mon Sep 24, 2012 2:42 pm
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

I understand. Have you considered Dual QoS (in one MT router) or two hop solution (use gigabit and powerful machines plz) one for client max limit and one for overall QoS selective drop?
by NetworkPro
Mon Sep 24, 2012 2:11 pm
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

not an elegant solution ? :) Paint the router in some colour then it will be elegant for you :)
by NetworkPro
Mon Sep 24, 2012 10:59 am
Forum: General
Topic: LLQ required
Replies: 66
Views: 25423

Re: LLQ required

LLQ is a marketing word nowadays, that Ethernet best-effort is so awesome.

If you experience some problem it probably is elsewhere - for example - upstream.

Bang!
by NetworkPro
Mon Sep 24, 2012 10:44 am
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

yes I can imagine downgrading is not perfect at all and when I was trying different non-final versions in the past I have learned that best is to NetInstall clean after format and expect stability then :) If the version is official release - I had success with upgrading and downgrading by just uploa...
by NetworkPro
Sun Sep 23, 2012 8:53 am
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

When the sniffer is Running on that interface - in my case RB450G eth5 - the rx drops are not counted - probably the interface is not in promiscuous mode by default and the counter counts every frame not for itself.
by NetworkPro
Sun Sep 23, 2012 12:43 am
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

mhugo, with changed MAC or default MAC ? do you see the gateway's MAC in the arp table? What happens if you add it there manually? Thanks.
by NetworkPro
Sat Sep 22, 2012 1:13 pm
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 40581

Re: RouterOS v6 release candidate 1

rx drops - what are we counting here ? frames not destined to our mac address ? frames with crc problems ? I get quote some of these but ping is going without loss (RB450G HW Rev 2009-ish Eth5)
by NetworkPro
Thu Sep 20, 2012 9:53 am
Forum: General
Topic: L2TP problem
Replies: 16
Views: 7282

Re: L2TP problem

Have you done the usual things? Upgrade bootloader, reset and start from scratch, reinstall with NetInstall and start clean with a sightly different (better) configuration, change x86 hardware platform etc etc. ?
by NetworkPro
Wed Sep 19, 2012 9:29 am
Forum: General
Topic: L2TP problem
Replies: 16
Views: 7282

Re: L2TP problem

I find it hard to believe this bug still exists? Can I take a look at this setup and config, mate? Send me an e-mail with the WinBox access or write to Skype: hypnologic
by NetworkPro
Wed Sep 19, 2012 9:12 am
Forum: General
Topic: ROS v6 Suggestions
Replies: 76
Views: 31048

Re: ROS v6 Suggestions

Hi, I have read your comment on Mikrotik Forum about LLQ Which Hardware do you need for this ? best regards Hello, My comment above to use a switch to jump a packet queue is very far from optimal for solving anyone's QoS problems :D Often the problem is that the upstream connection (even expensive ...
by NetworkPro
Fri Sep 14, 2012 10:59 am
Forum: General
Topic: CoDel support?
Replies: 46
Views: 21062

Re: CoDel support?

MikroTik do improve queueing when they can.

What is a benefit of Codel compared to <hardware-only-queue + a PCQ queue for equality> ?

Thanks.
by NetworkPro
Fri Sep 14, 2012 10:25 am
Forum: Wireless Networking
Topic: Wireless Disconnect Extensive Data Loss
Replies: 44
Views: 49782

Re: Wireless Disconnect Extensive Data Loss

Lower the tx power to improve stability.

Are you trying to get Wireless ISP training for your one link by asking 10 0000 questions on the forum? :)

What power supplies are you using? Try chaining those.

Are you using grounded cables and cases?
by NetworkPro
Wed Sep 12, 2012 2:21 pm
Forum: Wireless Networking
Topic: Interface HTB - hidden buffer
Replies: 44
Views: 18002

Re: Interface HTB - hidden buffer

Yeah man. Please share some test results though.

1. OpenWRT it needs to be Routing mode instead of bridging
2. have you compared to latest RouterOS with hardware-only-queue set for the interface ?

OpenWRT/latest (has Codel) sounds REALLY COOL and totally awesome - everyone should try it :)
by NetworkPro
Mon Sep 10, 2012 4:40 pm
Forum: General
Topic: how block connection of p2p?
Replies: 291
Views: 201010

Re: how block connection of p2p?

Its a confidence trick. Don't believe them.
by NetworkPro
Mon Sep 10, 2012 3:00 pm
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 45109

Re: NEW PRODUCT - Cloud Core Router

Yes - one more BGP session arranged with upstream provider + HSRP (VRRP) on the "inside" side.
by NetworkPro
Mon Sep 10, 2012 2:24 pm
Forum: General
Topic: how block connection of p2p?
Replies: 291
Views: 201010

Re: how block connection of p2p?

wtf don't let them push you around! Reply with Net Neutrality 'gram' and put their source e-mail in the spam list.
by NetworkPro
Sun Sep 09, 2012 7:45 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 45109

Re: NEW PRODUCT - Cloud Core Router

What do you think about two router config for resiliency? (each router with normal router parts - flash for storage)
by NetworkPro
Sat Sep 08, 2012 6:44 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 45109

Re: NEW PRODUCT - Cloud Core Router

Why do you want to waste electricity and money with this x86 beast? RAID in a router? Impress your GF with something she can see not with stuff that is sitting in a server room.
by NetworkPro
Fri Sep 07, 2012 9:44 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 45109

Re: NEW PRODUCT - Cloud Core Router

x86 boxes with RouterOS will give you more flexibility and useful features to quickly and directly serve your needs.

WinBox and WebFig will make your life easier and prepare you for the CloudCore when it is available.
by NetworkPro
Tue Aug 21, 2012 10:19 am
Forum: General
Topic: Newsletter 41: NEW PRODUCTS!
Replies: 64
Views: 30350

Re: Newsletter 41 NEW PRODUCTS!

Every phone packaged with this cable? We are speaking of the OTG , correct ? http://www.yogaretnam.com/wp-content/uploads/2012/07/nokia_ca_157_usb_otg.png In Bulgaria we buy them for 1-2 euro (1 BGN - 2.5 BGN). They were 4-5 euro until devices became widespread and resellers changed their profit str...
by NetworkPro
Mon Aug 20, 2012 4:28 pm
Forum: General
Topic: Newsletter 41: NEW PRODUCTS!
Replies: 64
Views: 30350

Re: Newsletter 41 NEW PRODUCTS!

Optimally support for this Wimax "biscuit"?? http://max-telecom.aksesoari.laptopi.notebook.bg/biskvitkata-na-max-telecom/ via USB cale (apparently can be connected via USB). http://max-telecom.aksesoari.laptopi.notebook.bg/public/files/products/3912/images/13071_450x420_fit.jpg (click for ...
by NetworkPro
Mon Aug 20, 2012 4:11 pm
Forum: General
Topic: Newsletter 41: NEW PRODUCTS!
Replies: 64
Views: 30350

Re: Newsletter 41 NEW PRODUCTS!

Excellent. I have a USB OTG cable prepared.

And if a USB device does not work, can we help for it to be supported by sending a supout file while it is plugged in ?
by NetworkPro
Mon Aug 20, 2012 10:50 am
Forum: General
Topic: Open Flow
Replies: 13
Views: 12609

Re: Open Flow

Let's say if MikroTik provide a 110% excellent SDN solution utilising only MikroTik hardware, then everyone will be happy about the existence of this technology and will be even happier to buy a good thing for a good price and not even look at everything else. The difference with the big corporate p...
by NetworkPro
Sun Aug 19, 2012 10:31 pm
Forum: General
Topic: Newsletter 41: NEW PRODUCTS!
Replies: 64
Views: 30350

Re: Newsletter 41 NEW PRODUCTS!

I will get one RB2011UAS-2HnD-IN I think its awesome! Yeah ! I wish it had a proper USB port to plug in 3g dongles, wimax dongles, usb Wi-Fi dongles, usb ethernet, usb hubs, usb storage, usb to serial so on p.s what if I plugged in an USB otg cable into that port, will that give us a proper usb host...
by NetworkPro
Fri Aug 17, 2012 9:15 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCT - Cloud Core Router
Replies: 104
Views: 45109

Re: NEW PRODUCT - Cloud Core Router

one core one gig port on pci-e and a vlan switch, what can a network need more ? to save from electricity bills I guess.

p.s. metarouter yes metarouter
by NetworkPro
Wed Aug 15, 2012 7:52 am
Forum: Beginner Basics
Topic: RB 450G is hot?
Replies: 35
Views: 25085

Re: RB 450G is hot?

Isn't it built into the CPU ? Or Under it perhaps? With the new hardware-only queue I think we can underclock it a little bit from 680 to 600 and even 400Mhz to achieve better temperaturers, what do you think? P.S. I replaced the original 24V adapter with 12V - an ATX HIPRO HP-M1854F3P Rev 03 and th...
by NetworkPro
Thu Aug 09, 2012 7:02 pm
Forum: RouterBOARD hardware
Topic: RB450 High temperature !
Replies: 18
Views: 9480

Re: RB450 High temperature !

I use a 120mm general purpose/PC fan powered by 5v instead of 12v. This makes it close to noiseless. This is mounted ontop of the PCB with the top aluminium cover removed. I haven't solved the dust problem though but I am solving the entire problem by smashing the 450g into pieces and replacing it w...
by NetworkPro
Sat Jul 28, 2012 7:21 am
Forum: General
Topic: NTP client in ntp package not working but built in client is
Replies: 36
Views: 35766

Re: NTP client in ntp package not working but built in clien

I got the NTP server's Client part workign by switching NTP servers around.

Then when I tried to use it as a NTP server -the client says "server not synchronised"

5.19 x86 and mipsbe
by NetworkPro
Thu Jul 19, 2012 3:40 pm
Forum: RouterBOARD hardware
Topic: 802.11ac wireless cards for mikrotik
Replies: 10
Views: 12307

Re: 802.11ac wireless cards for mikrotik

I can see why new model home routers are desirable, but they still do not have dual wan load balancing (only WAN port). Maybe MikroTik can offer software like the QuickSet, for instant dual-wan PCC, that can enable a gigabit RouterBOARD to be desirable by the same people to put it infront of their c...
by NetworkPro
Mon Jul 09, 2012 8:32 am
Forum: General
Topic: ROS v6 Suggestions
Replies: 76
Views: 31048

Re: ROS v6 Suggestions

I am Sorry. Gigabit ethernet is the truth. You can have 40 meg service but the ethernet rate needs to be gigabit so that when you transfer 39 megs/FD - your latency would be great for games and VoIP. Right? :) Use a switch facing the ISP and feed priority packets on one ifs port. Cheaper switches su...
by NetworkPro
Sun Jul 08, 2012 7:46 pm
Forum: General
Topic: ROS v6 Suggestions
Replies: 76
Views: 31048

Re: ROS v6 Suggestions

RouterOS does "selective drop" with recommended small queue sizes.

P.S. upgrade to gigabit ethernet and you should not need LLQ
by NetworkPro
Thu Jul 05, 2012 8:05 am
Forum: General
Topic: ROS v6 Suggestions
Replies: 76
Views: 31048

Re: ROS v6 Suggestions

I disagree with the above post and what it quotes. Currently it is possible to make a good QoS config. But it is not easy.
by NetworkPro
Mon Jul 02, 2012 11:09 am
Forum: RouterBOARD hardware
Topic: Adsl integrated (again?)
Replies: 29
Views: 6309

Re: Adsl integrated (again?)

What about someone else's existing ADSL solution inside the RouterBOARD case, connected internally with Ethernet or USB, making a fool-proof "CPE", where the customer would be prevented from sabotaging his own service by unplugging an external cable or dongle?
by NetworkPro
Thu Jun 28, 2012 9:55 am
Forum: General
Topic: Open Flow
Replies: 13
Views: 12609

Re: Open Flow

Actually the way of putting services onto a providers OR datacenter network will be done with OpenFlow or similar technology in the future. This is 100% the future and everyone is behind this. MikroTik are too often criticized for the quality of the software, even if it is not perfect - it is still ...
by NetworkPro
Sat Jun 02, 2012 7:35 am
Forum: General
Topic: RouterOS v5.17 released
Replies: 47
Views: 21208

Re: RouterOS v5.17 released

:lol: yeah I know right, Funny.
by NetworkPro
Tue May 22, 2012 5:02 pm
Forum: Wireless Networking
Topic: Interface HTB - hidden buffer
Replies: 44
Views: 18002

Re: Interface HTB - hidden buffer

The proper saying is "lucky man" not lucky boy. I wouldnt say this is luck. If you switch to nstreme on wirelss don't you get up to 3ms latency per link without any aggregation ?
by NetworkPro
Tue May 22, 2012 9:31 am
Forum: Wireless Networking
Topic: Interface HTB - hidden buffer
Replies: 44
Views: 18002

Re: Interface HTB - hidden buffer

I strive to achieve 0ms latency (less than 1 or 1ms) end-to-end in any network I operate. By using 1Gbps+ etc.

I feel bad if a network I operate is more than 3 ms end-to-end and I don't want to have anything to do with such network.

Its just how I am.
by NetworkPro
Sun May 20, 2012 10:50 am
Forum: Wireless Networking
Topic: Interface HTB - hidden buffer
Replies: 44
Views: 18002

Re: Interface HTB - hidden buffer

sten, your post is gold with platinum ontop. Because this way Operators using MikroTik could offer much better bandwidth+SLA contracts! If MikroTik solutions could do this, some people would not even look at optic and more expensive solutions that go around such issues by simply having HUGE availabl...
by NetworkPro
Thu May 17, 2012 1:11 pm
Forum: Wireless Networking
Topic: Interface HTB - hidden buffer
Replies: 44
Views: 18002

Re: Interface HTB - hidden buffer

It would be nice if MikroTik guys could tell us now that they have taken care of these performance potential issues so RouterOS is much better and would not suffer from such :) I think hardware-only queue on RouterBOARDS is a step towards the right direction :)