MikroTik

dannyboy

Hello, I would like to know if it possible to create statics routes within the same RB2011 router. This is the issue that I have, I created separate networks for different types of users. On Ether3 I have once network 192.168.200.0/24 with a gateway 192.168.200.1/24 on ether2 I have 192.1068.201.0/2...

dannyboy

I found out the problem. User manager has a glitch. If you create a profile on the user manager and then remove it, it no longer shows you the profile on the user manager. I'd you go to the terminal on the winbox or login via telnet and goto tools user-manager profile profile limitations you will fi...

dannyboy

Level 6. I found out the problem. User manager has a glitch. If you create a profile on the user manager and then remove it, it no longer shows you the profile on the user manager. I'd you go to the terminal on the winbox or login via telnet and goto tools user-manager profile profile limitations yo...

dannyboy

I was using 29 but since this happened I switch to the latest one. Ok when I say customers I mean my clients on the street that buy the prepaid cards not Customers as distributors..

Any Idea guys?

dannyboy

I have the same issue, but I spent money on creating 3,000 prepaid scratch off cards. I have read this issue on another thread but also with no response. I bought a rb11002xh for this with the 6 level license specially for this and now this happens.
I hope someone gives us a hand...

dannyboy

Wow, no answers for this issue?!!!! I am having the same issues with profiles set to one day. Any one from Mikrotik support has an answer??

Thanks

dannyboy

Hello Everyone, I am a bit confused on the trail settings for the hotspot on Mikrotik. This is what I want to do, I want to let new users that connect to my hotspot, have a 12 hour limit after first login with the free trail bottom. From what I understand, if I setup 12 hours on the "Trial Upti...

dannyboy

IBR771, Can you explain why this would work? I would like to know to improve my knowledge. Also I will be setting up a large hotspot, am getting information that some people are saying that they will by my 24hour voucher connect to the wifi via a computer and then do internet connection sharing to s...

dannyboy

Hello everyone, I have an issue, I am setting up a Hotspot in a neighborhood, I am using Mikrotik as my controller as always, and other radios and antennas for this project. I will sale prepaid 24H voucher to residents of this neighborhood. Mostly will be mobile connections. My issue is that I have ...

dannyboy

Hello everyone I have a RB1100AHx2 for my main server I have ether1 as my wan and I have created a bridge with ports 2,3 and 4. I have three Access Points connected to those ports. I have setup an IP address of 192.168.100.1/24 to the bridge for administration purposes. I then created Vlans under th...

dannyboy

Hello Everyone, I am having a weird issue with one of my NetMetals. Here is my setup: Base Server -- RB1100AHx2 Tower -- 2 Netmetals with 120 sector antennas Clients – SXT 5 ac I am using the base server as a pppoe server, the two radios are connected to a bridge using port 2 and 3, they are setup a...

dannyboy

Thank you is now working as radius. Now I have another problem, I created a profile with rate and burst limitation, for some reason the burst is not working when user that are on the radius list log in. I also created the same profile on the hotspot profiles and the users that log in with the hotspo...

dannyboy

Hello, I have a 1100AHx2 as my main server, I have a bridge using ether2, ether3 and ether4 as the bridges ports. I use this bridge for my Ptp wireless clients. The ip of this bridge is 172.28.0.1/21. I have now created a hotspot using ether11, the ip for this hotspot is 10.5.50.1/24. The hotspot wo...

dannyboy

Hello guys, I have been trying to figure this out, here is the situation. Setup: RB1100AHx2 as main router Ether1 = WAN Bridge = ehter2,ehter3, ehter 4 Bridge IP 172.28.0.1/30 on same bridge PPPOE Server with IP 172.16.0.1/20 First IP is static for radio maintenace and second for PPPOE Clients. When...

dannyboy

Wow,

68 views and no respond...

Any one???

dannyboy

Hello, I did resolve the WDS issue, what I did was only use three WDS per sector. Meaning my main AP and two ap on WDS. Now I suppose you can use more, but I woould do static routing for that. Also remember that the actual throughtput on a ptp link is 50% of what the radio says, and everytime you us...

dannyboy

Hello Normis, Sergis and everyone else, First I want to show off by saying that I have gotten my MTCNA, MTCRE, MTCTCE, UBWA and the UEWA. I still have MTCWE, MTCUME and the MTCINE to go… I have learned a lot about Mikrotik OS and about RF on the Ubiquiti on both trainings, I took the UBNT because I ...

dannyboy

Thank you Normis

dannyboy

Hello,

I am want to use the User Manager for my project. Can I modify the feel and look of the entire UserManager? Also can I modify all the language? In other words where can I find the html,php, css or any other files to do this?

Thanks

Daniboy

dannyboy

from what I understand you can set them up as bridges and still use the dashboard and mt hotspot.. Please contact Daniel G from smartwires.net his done it and am setting up the same thing. I am switching from groove metals to open mesh equipment but keeping my hotspot with MT..

dannyboy

hello, I will contact you, thank you.. MT Support has not answer me with my issue via email... Its been some time now. Update, nothing from MT Support. I have been reading about open-mesh and I have decided to do my city wifi with their equipment, had to many wds issues with the groove. OM does all ...

dannyboy

Hello plisken, No luck, we gona have to wait for MT to answer me... On the other hand \i have a question about routing protocols. Let me explain my setup in one city block. Main Tower: we have a BaseBox 5.8 ghz and 120 deg 14 dbi antenna as bridgeAP. PC with RouterOS and using 128.16.0.1/16 for netw...

dannyboy

hello plisken,

I tested away from the AP with two phones and my laptop, I had two bars and still did the same thing... I am still waiting for a response from MT. I hope the give me a solution soon..

Daniel

dannyboy

I was able to downgrade to 6.15 but I am still having same issue... Here is whats happening when I connect with my device... stays connecting then says network mikrotik didnt respond. here is an image..

dannyboy

Yes I can see all that, but when any wielress device try to connect it says AP does not respond.. I will send file to mikrotik...

dannyboy

plisken,

Nothing my friend, still not working... version 6.20 had an issue and broke my grooves. Now back in version 6.19 it does not work... Maybe I can use them as station, will test them for that...

dannyboy

Hello, Here is the default config, I only changed from station to AP Bridge, and still no connection to devices... I also tried with different countries and still no connection.. It keeps saying Access Point did not respond. # jan/02/1970 00:02:31 by RouterOS 6.19 # software id = ARP1-8WPS # /interf...

dannyboy

Thanks for the information, I did all that you suggested, I was able to re install version 6.19, but my AP does not work... It does not let any wireless device associate with it... I have also tried to downgrade to 6.15 since a couple of people have told me that that version is the one that is reall...

dannyboy

I am not able to fix the two grooves, since its just rebooting every 2 sec, it does not give me access to do anything!!!!! This happend when I updated to latest version 6.20... Any ideas_????

dannyboy

Ok, I will try to do the netinstall, I have been busy lately.....

dannyboy

for some reason they stopped working, and two of them I had to change. I downgraded to .19... The two I had to change for some reason they are in a loop, just keep rebooting and I have no time to do anything to it.. I tried reseting them but no luck,,, Any ideas?

thanks

dannyboy

Do not use v 6.20 now my network is down...

dannyboy

great I will test!!! karma going your way!!

dannyboy

Hello, I have good signal from the mobile devices, on my phone for example I get -52. The Antena I am using its the 6 dbvi antena that comes with the grooves and the are on a 20 ft pole on the roof of houses, so like 30 ft high... The SSID "Do have a Character!!" I have called them NavigoW...

dannyboy

Hello guys, I have setup a sector of the city hotspot I am creating. I have semi followed what you guys suggested. The image below shows my setup. For some reason I am having connectivity issues, mostly with tablets and cell phones. I have spoken with some other people and they are telling me that t...

dannyboy

Hey guys,

Great, thanks a lot I will keep you posted... So all SSIDs, different channels and low power... So clients will still be able to roam??? I didn't know that, I thought they were going to disconnect and had to reconnect to new AP... Like I said i will keep you guys posted... Thanks again!!

dannyboy

plisken,

So what do you think, should I use different SSID per AP or use the same SSID on all APs?

dannyboy

Thank you plisken, I think that’s what I am going to do, I am going to get rid of the MESH WDS, it has to much problems... It’s not stable at all. This was my original setup: Main Tower -- Fiber Optic connected to my RB2011L Ether1, 3 BaseBox 5.8ghz with a 16dbi Ubiquiti 120 Sectors. Repeaters -- SX...

dannyboy

I am setting up a wireless network and I am trying to use MESH WDS. I was able to configure the Metals with no problem and they all connect to each other, I have en good signal between them and good pings. I use the configuration of Model 1 on this wiki : http://wiki.mikrotik.com/wiki/Wireless_WDS_M...

dannyboy

Hello CyberTod, I have a question for you... I have been seeing people connecting with -80s and still get a good CCQ.... above 30s... Now if i set the signal limits to -70 this users that actually seem to have a good connection wont be able to connect and this means $$. Its CCQ the best way to rate ...

dannyboy

Ok guys I have another question.... Just want to learn more about this.. This is what I so on the hotspot manual: ip hotspot host Host table lists all computers connected to the HotSpot server. Host table is informational and it is not possible to change any value there. What is that mean???? Ok I h...

dannyboy

Ok, thanks!!! THAT SUCKS!!! I WAS GONNA MAKE MILLIONS!!! HEHEHEHE!!!! bUT I HAVE 20 per block with out advertising is not bad at all...

dannyboy

Thank you Janisk, Well I am just trying to figure out if its true that actually 450 users actually searched for my signal and click connect to wireless AP or if the mobile device automatically got an IP address from the DHCP server. From what you are telling me if I understand correctly users must o...

dannyboy

ok, here is a question, I have the hotspot running on a server, this connects to my AP and AP gives clients access. Now the DHCP in theory works this way: Clients send DHCP server a Discovery, dhcp sends an offers, client sends a request and dhcp acknoladge and assings ip address.. Correct? Now if t...

dannyboy

Hello, does anyone have any idea on this?!!!

dannyboy

Hello, I need to somehow log all hotspot users activity into a log for security reasons. I have tried searching and cant seem to find anything. I need to be able to log all information about the user navigation and all other activities... I found similar question from 2009 but no answer. There is no...

dannyboy

Thank you I will test and let you know..

Daniel

dannyboy

Great that is working now!!!! I greatly appreciate it.. Thanks so much.. I am doing a citywide hotspot with all MT Equipment I have 3 city blocks working great as a pilot using wds.... Its working great but now I am going to have 14 City Blocks and want to have only good connections connect to it!!!...

dannyboy

I have tried to configure the Access-List to do disconnect everyone that has < -65 and it does not work..Less meaning -68,-70,-75 etc... I have tried to do this directly from the manual: To make it work correctly it is required that client is matched by any of ACL rules. If we modify ACL rules in pr...

dannyboy

ok, been looking at antennas and I found out that for my project I really don't need mimo. I have bought a basebox and I am going to test with a luxul http://luxul.com/xw-24o-fps11. This antenna is a non-mimo antenna. Since the BaseBox its a mimo AP, how can I make it a non-mimo AP? I dont want to p...

dannyboy

Ssofet,

Thank you, I will test and let you know.

daniel

dannyboy

ssofet That is correct... I just put a basebox 2.4ghz with 2 9dbi to test and this is working like crap... I am not blaming MT because I am not sure if it it configured right. I have never used MT for wireless before and am not sure how to config the wireless interface. But I get at 20 meters away a...

dannyboy

Hello ssofet, Thank you for the response. I think I have to look at it as an apt complex. This hotspot is going to have to reach indoors and houses in Nicaragua are made of concrete blocks, wood, adobe, clay roof, zinc roof. But also they have many windows, cracks, inner patios, open corridors and m...

dannyboy

Great information guys... I love MT also and i have been doing Apartment complexes for a long time. Year 2000 I setup my first apt complex with orinoco ap2000 and hyperlink Tech antennas. It was fun and at the same time a beautiful nightmare. Anyway I learned that the point to do a great wifi in apt...

dannyboy

Hello Guys, I have been doing lots of research about antennas and radios. I am a MT guy and want to stick with MT but I have found some other equipment that have some claims that makes me wonder. What I am building is a City Wide Hotspot. There will be no CPE involved but the smartphones and laptops...

dannyboy

Yes Sorry I thought I did but I guess it was on another forum. Here is what I did: Redirect to Nopay Site /ip firewall Nat add chain=dstnat action=redirect to-ports=8081 protocol=tcp src-address=172.16.50.1-172.16.50.254 dst-port=80 comment=”Redirect to Proxy” disable=no /ip proxy Set port=8080,8081...

dannyboy

Thank you for your answer...

dannyboy

Hello, I am getting some BaseBox 2GHz MiMO 1000mW Access Point. I have been looking for some high gain antennas to put on them, 10dbi to be exact. I have only found the regular n-male or n-female antennas at this gain. I also found some Hyperlink Tecnologie "L-Com" 9dbi rubber duck antenna...

dannyboy

Thank you I got it working!!!

dannyboy

Ok, I just got three Grooves a-52HPn and they really suck. Atleast with the default config and the 6dbi antenna they are selling it with. I just changed from 5ghz to 2ghz and nothing else. I get 30m away and ccq its no more then 60%, if I go more then 40m I loose connection. This is a really bad rad...

dannyboy

Hello, I got it working!!! For anyone who needs it here it is, /ip firewall Nat add chain=dstnat action=redirect to-ports=8081 protocol=tcp src-address=172.16.50.1-172.16.50.254 dst-port=80 comment=”Redirect to Proxy” disable=no /ip proxy Set port=8080,8081 /ip proxy Access add action=allow disabled...

dannyboy

Hello, I have been trying to redirect users to a paynow website for like 6 hours now and its not working. I have a pppoe server and I setup a profile for non payment users. I get the user to redirect when the login but it only happends one time. I want in to happen every time they try to navigate. I...

dannyboy

We bought Radius Manager, and although it works well, it does not do all the accounting that our company needs. If also does not allow more breakdown on the sale items, and such. We could not get it to do what we needed on the sales and accounting end. WHMCS software worked well on the accounting/s...

dannyboy

Hello, Am using hotspot and want to know if mikrotik can tell if am connecting from a mobile device or laptop or desktop? If it does can I make a different profile per detection of device. So if a client connects with a mobile device it gives the certain profile if laptop or desktop it gives another...

dannyboy

RogerWilco,

Thank you very much for the response. Have a great day.

dannyboy

Thank you guys for the info.. I found some websites that might help someone else, even though the article is great... GROOVE 52hp Power: Passive 9-30V PoE only. 16KV ESD protection on RF port. Up to 0.19A at 24V (4.56W) I have a question; what happens if I only use a 12v system to run the Groove? It...

dannyboy

Thanks all of you for the answers. I read a little more and all are talking about station wds. I will use WDS Relay.. Also on this link is exactly what am going to do.. But in this link it says that you halve the bandwidth after the first hop... So is there three hops from the client on this example...

dannyboy

Hello
Is anyone know the answer to this?!! How many wds can I have with mikrotik? Please view map to see if this is correct.

dannyboy

Hello, What is the limit on WDS devices? Example image attached... I remember that I could only have 6 to 1 back in the days with ubiquiti. Now am going to use Groove 52hp with the 2.4 ghz 6dbi antenas for the clients and 5ghz for backhaul 16dbi stx and the omnitik at home base.... What is the recom...

dannyboy

Thank you,

Yes we are only going to use 2.4ghz... My question is about the solar energy. I need to know if my calculations are right.

dannyboy

Hello, I decided that we are going to test out the groovr 52hp. I will use the 2.4ghz with thr 6dbi antenna. The unit uses power from 10-30 volts dc so this means I cam use a 12volt battery? Also i have found a 12v 26ah deep cycle battery and a 25 watt solar panel. From looking at the specs of the g...

dannyboy

Never mind I got it working!!!! This is what I did for those that are having the problem: I downloaded knock.exe from http://www.zeroflux.org/proj/knock/files/knock-cygwin.zip I then unziiped and place the exe file and dll on my C drive. I then went into cmd prompt in windows and went to the C:/ onl...

dannyboy

Hello, I have followed the full instructions to secure my router at the same link http://wiki.mikrotik.com/wiki/Securing_New_RouterOs_Router#Port_Knocking Now I cant login to my router from anywhere!!! I downloaded the Knock.exe I run it but this does not work. I also try to type the command on the ...

dannyboy

Hello, Great info petzl. Ok between the Omnitik and the Groove what would you use on a city wide network? Lets say all users will be 5ghz, all smartphones. Also can you send me the link of that omni you are using for the Groove? Looks nice and want to see the price to compare. The omnitik I will be ...

dannyboy

Great!!! Ok, I am looking at the Groove and it has the advantage of doing either 2.4 or 5.8ghz. Thats is a very good thing on this equipment. Also there is an antenna that matches this equipment very inexpensive!! Decisions, Decisions!!! http://www.balticnetworks.com/mikrotik-groove-52hpn-2-4ghz-or-...

dannyboy

Thank you Normis, I have used other products in the market and had some issues, I have been using MT since 2001 but always just as the access controller and I have never had issues with the RouterOS. Now I want to just have only Mikrotik on my deployments. Between the Onmitik and what other Mikrotik...

dannyboy

Hello Normis, Well I just order one Omnitik to do some testing. I will be using it for a hotspot. I would off loved it if it was 2.4ghz but thinking about it everything will be 5ghz soon. If this works well I will be buying 196 units for the City am doing. Most of the clients we have seen connected ...

dannyboy

You are the best!!! I will not use long cables they will be right next to it. Thanks

dannyboy

Hello, I will be setting up some Omnitiks on some city blocks. I want to use solar energy to have this Omnitiks up and running all the time so I don't have the issue of electrical outage. I did a search and found this: Powering The board accepts powering from the Ethernet port (Passive PoE): • Ether...

dannyboy

Ok, Thanks for the response. Now Why would MT make an AP that only supports 5ghz? I think they should off made both 2.4ghz and 5ghz Omnitik. What is the point of doing this if 90% of equipment out there are not compatible with it. I been reading and even if you have b/g/n wireless card on your lapto...

dannyboy

Hello guys, I am looking at the Omnitik. The radio says the folloowing: Wireless: IEEE802.11a/b/g wireless client and access point Full IEEE802.11n support Nstreme and Nstreme2 proprietary protocols NV2 protocol Wireless Distribution System (WDS) Virtual AP WEP, WPA, WPA2 Access control list Wireles...

dannyboy

Hello, I want to be able to redirect hotspot users to an information page when their account is expired. I have read about pppoe and having to change users to a expired profile. The issue with me its that i am using hotspot. I dont want to have to keep track of who is expired and who is not. I want ...

dannyboy

Hello Gmilas, Yes I started reading about this too. I found some info and I see what you are saying.. That's to bad that android does not have the feature to open up the browser. The other solution is to put the SSID "Open Browser after connect" jej... I will keep up with this, is very imp...

dannyboy

Hello, I have an issue, I have a hotspot and I see many dhcp leases on my network and 80% of them are mobile phones. I have noticed that they have a good signal but they never connect. Now the reason they don't connect if because of lack of education. I am doing this in Nicaragua Central America. Th...

dannyboy

Hello, I am having an issue with the hotspot. I set it up and noticed clients could not connect. I investigated and found out the the MAC address on the Host list its all the same. My network: Main Server: Mikrotik using Hotspot Version Main Tower : 1 Deliberant APC-5m-90 AP Remote Tower: 1 Delibera...

dannyboy

Hello, I have the latest version of MTOS. I have setup a hotspot with the wizzard and for some reason the cookie login is not working... I have the routerboard 450g also I bought a PC to see if the problem was the 450g and I get the same problem... Now I have been using MT for a long time and never ...

dannyboy

Hello, I have setup mt to work as a hotspot, it has been working great and I have a radius server to authenticate users. Tonite I think someone is messing around and all I can see in the log is that requesting to disconnect from the radius server. When this happens users cant login and there is no I...

dannyboy

Hello, how do you tell mikrotik to look at transparrent proxy ? Ok, I want to setup squid box, from what I understand we put the squid box after MT and Internet connection. So I will have the squid box setup internaly... I have no problem with that, now how do I tell MT to send requests to that squi...

dannyboy

Hello, I have two crossroads and I have them setup in my lab(My room). I have one as AP-Bridge and the other as StationWDS. I Put a static ip address on both and make them connect. Now, I was testing the throughput using the MT BW Server and the Bandwith Test. I left everything as default and made t...

dannyboy

Ok Normis,

I sent the email to support I hope they get it soon , am greatfull for your help.

Thanks,
Daniel

dannyboy

Ok, Normis,

Well thanks for your help, I had to have this up and running by morning time and I got 4 hours left. Its 3.27am... I will keep trying because I realy dont want to use another software.

Thanks,

Daniel

dannyboy

Normis, I have installed the MT usermanager in two other computers, and set it up just like your manual says and I still get the same problem. Also you say to find another consultant? Well I am doing that, what better consultant than you? There is noone better. Now I am starting to believe the probl...

dannyboy

I bought the usermanager and set it up correctly.... I actualy paid a consultant to set it up and the usermanager dont work. I have tried to get help on the user manager forum and seems like noone know about this. The problem is getting the secure response back from paypal.... We are able to signup ...

dannyboy

Hello, Thanks for your response, Anyway I got the two servers to work correctly on the authentication, after doing more test I was able to make that part work. No thanks to the user manual.... Now this is what I got; If I create a user manualy on the user manager and and apply a credit to it and tha...

dannyboy

Hello, I have a problem with my usermanager, I had someone configure it for me and the unit was working great... Today I had finished setting every AP and was ready to start charging on my hospot... MY USERMANAGER IS NOT WORKING!!!!!. This is whats happening: I have the username manager at my house ...

dannyboy

Hello,

got it working!!!

thanks

dannyboy

Sorry I posted this in the wrong forum before... Hello, I bought a level 6 license for my User Manager MT and a Level 5 for my remote MT. I am using hotspot on my remote MT and got everything to work except the wall garden!!!! When my users click on the SignUp link at the hotspot login page it will ...

dannyboy

thanks twana222 its working!!!!

daniel

dannyboy

Hello, I have created another ip address for my hotspot interface and I am using a static ip on my computer so I dont have to login using the hotspot. I have tried to create rules to let my computer to just passthrough with out login in but I always get the login page. How or what rules do i need to...

dannyboy

Hello, I have a dilema about web cache, what would be the best choice if money is not an issue. Should I buy an applience that does Web Cache or should I just setup web cache on the MT? I have used long time ago the web cache on the MT and I realy didnt noticed any difference... We are talking about...

dannyboy

Hello, I did what Netrat said and at first it was working but once I rebooted my router it stppoed working. I think its doing this because I am using hotspot and I have rates set on user profiles. I noticed that if I delete all the simple queues MT creates for my users and only leave the ones that I...

dannyboy

Thanks to both of you, I will try both suggestions... Net where can I find some examples of what you are doing? Sounds like this way I can set surfing the internet for the fastest and limit all others.
thanks,

Daniel

dannyboy

You are right! I already count back from 100!! This is the way I setup the rule p2p; ip firewall rule add chain=forward p2p=all-p2p action=drop I have tried putting this as the first rule on the list and as the last rule on the list but for some reason its not working. The before I updated to this v...

dannyboy

I recently bought a level 6 license to do hotspot in a apartment complex, paid someone to setup usermanager for me and now I see that this POS 3.14 is not working properly... I am trying to do p2p blocking, I know it wont do all applications but I know for a fact that it does block limewire!!! Now I...

dannyboy

Hello, I am in the process of installing MT 3.14 to be used for hotspot with user manager. I have done the following; Created a One Subscriber and added a publicID, Public host, and paypal info.. Did not add a Customer since its only me doing this. I than tested by creating a user by signing up at h...

dannyboy

Hello, Just want to check if this is correct, I wantg to open all ports to an internal ip address, is this correct? / ip firewall nat add chain=dstnat dst-address=165.98.144.236 action=dst-nat to-addresses=192.168.60.253 to-ports=0-65535 comment="Codemet \ VOIP" disabled=no add chain=srcna...

dannyboy

linksys WRT54GSV4 will not connect to mikrotik pppoe server....

does anyone else have problems connecting this router using pppoe server on mikrotik?

It says it cannot get IP from server!!!!!

dannyboy

Hello, Someone stole my users info pppoe username and password and this person connects using different users sometimes... I created new passwords for all my users and secured my router, today somehow the individual was connecting again. I want to use mac auth but the problem is that the mt router s...

dannyboy

Thanks,

With this info I can make a decision

Thanks

dannyboy

So,

How many users do you recommend?

Simple question, can you give a simple answer?

dannyboy

hello, I would like to know how many clients will the rb230 handle. Thinking about using this for my Wisp... I have a MT server allready but I use third party equipment for the wireless sections. Meaning a PC 2.8gig with 1gig ram is my main server, than I connect third party aps to my MT ethernet sl...

dannyboy

Hello, I use pppoe server to have my clients connect, I am using profiles and on rate limit I have this "128k/128k 1000k/1000k 256k/256k 30/30". From what I can see this suppose to give users access to full bandwidth. If user starts downloading a big file and its burst threshold is higher ...

dannyboy

Hello, I realy dont know what is happening but for some reason my clients can be surfing the internet and suddenly it just stop surfing, pages stop opening, I also expirenced this connected to the MT. I am using pppoe on the latest version. This is what happends: I am surfing the internet thani clic...

dannyboy

Hello, I am buying a 1:1 T1 connection from my ISP in Nicaragua Central America. This connection goes via Fiber Optic from here to Nap of the Americas in Miami Florida. Here is the issue, during night hours starting around 8pm the Internet connection seems to give me the full bandwidth; I test this ...

dannyboy

great,

thanks i will do that

db

dannyboy

Hello, I have only one cliente that has a program that is not p2p and he downloads movies 24/7. How can I put a control on this issue. I realy dont know what file extention this movies are, from what I know there is avi and mpeg, what else is out there? and what rules and how i can control this ? db

dannyboy

Thanks a lot I will try

dannyboy

Hello, I use pppoe for my clients to connect and I am testing out the graph tool. Its a great tool to find out who consumes the most bandwidth. The only problem that I have is that once that user disconnects and connects again the graphs strats from scratch. How can I make it so it saves the graph. ...

dannyboy

Hello,

What is the diference with licence level 4 and licence level 5?

I there a place where to see what each licence support?

thanks
DB

dannyboy

thanks got it working

dannyboy

Hello,

I have a unit that uses port 80 to access it, I am doing port forward to that unit in my lan. Since it uses port 80 and cannot change that port on the unit, how can I change the port for the winbox?

Thanks

DB

dannyboy

ok, what i want to do is to have a script that sets all ppp secret profile=VIP and than have all ppp active connections removed. What this will do is set all ppp secrets profile to VIP and disconect the user to take effect next time user connects. I was able to do it with only one user: here is what...

dannyboy

Hello, I have pppoe server running, for some time, I have change back and fourth some stuff on the pppoe server to see if it resolves some problems but seems to fix one thing and break other.... :shock: 1. Sometimes I get two users with the same name but with a number at the end of the name. Ex. &qu...

dannyboy

Hello, I want to let all my users have all the bandwidth from their computer to my MT but control internet access from wan? Meaning that if they are downloading something inside the lan they have all bandwidth but if they will use internet have a 256k/256k connection. Can this be done, I am using pp...

dannyboy

on the nat rule just dont put anything on in-interface, that seems to work for me

db

dannyboy

Hello,
How can I make my MT stop viruses from coming into my network? There are some hardware that do this but are very expensive. Can MT do this? Check and stop viruses?

thanks

dannyboy

Hello,

I have a question, if money was no issue what would you rather have and why?:

Three 512k connections and use load balance or One 1.5meg connection and just control bandwidth per user?

Daniel

dannyboy

normis,

I went into queue simple and there is nothing where to put port 80 when creating the simple queue. Can you explain where to do this?

dannyboy

Listen, What I used to use was to NAT the users that didnt pay to a web server I had on the network. do this: add chain=dstnat src-address=192.168.10.44 protocol=tcp action=dst-nat to-addresses=10.10.5.200 to-ports=8085 comment="" disabled=yes play with it, not sure if the client ip is on ...

dannyboy

Check this out! This is how I figured out how to send protocols to each gateway!

http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways

dannyboy

Ok, For some reason the QoS code that is on this thread does not work for me. I copy and paste the firewall code for Http, there is two firewall rules, one connection-mark the other packet-mark, if I do it exactly like is on the thread, I wont be able to surf the Internet. So I played around and not...

dannyboy

Sorry, I found it, the problem was that my sister erased my link I had on my desktop and changed it with one I had on my favorites!!! She was smart to put the same name, jejeje thasts why I was getting the new link!!

Sorry Again

dannyboy

Why does MT take things off the forum?!!! There was a load balance that I use some where in the wiki, now its not there! This config uses policy routing and you basicaly set mangle rules to do mark routing and than in routes you set the routing mark name to that gateway. It used to be called just &q...

dannyboy

Hello,

I did that and still nothing!! cant login or ping my public ips from an outside ip address.

dannyboy

name="p2p" target-addresses=192.168.10.131/32 dst-address=0.0.0.0/0
interface=all parent=none direction=both priority=1
queue=default/default limit-at=64000/64000 max-limit=64000/64000
total-queue=default-small p2p=all-p2p

this is the queue, but still does not work...

dannyboy

Ok, glad am not the only one having this problem, the wierd thing now is that its only doing it in one WAN... Now on the WAN that is doing it I could not get a static ip from my ISP so I forced an IP address of the same network. I am now wodering if this is the problem!! Wont realy find out until I ...

dannyboy

Hello, I tried to do some QoS with the p2p control. It does not work!! At least for Ares, I setup a simple queue telling it to give me a 64K limit on dowloads and uploads, well Ares just laughs at the rule. Has anyone have this working for Ares? I want to have the whole network set to a 128k upload ...

dannyboy

Thank you,

Do you mean to check this on the MT or on the routers itself. The MT has all check ob the authentication.

dannyboy

Kolorasta, Well, I downloaded the new version and installed in my computer, version 1.9.2.3011. Still working as before! No traffic is going through, ARES does not connect... just do this: add chain=forward p2p=all-p2p connection-state=established action=drop comment="p2p" disabled=no dont...

dannyboy

Hello, I have problems with this two router models. The WRT54G from Linksys and the DI-604 from Dlink. When I set them up to connect via pppoe the server will not give them an ip address nor will connect to the MT PPPOE Server. Any ideas? I have a couple of clients that have this problem... They con...

dannyboy

I realy dont know how to make a wiki, I went into the wiki but could not find a page that tells you how to do it. About the Ip issue, I am able to login my router from inside my network, the problem is login in from an outside ip address. Example: If I am some place else in a diferent computer with ...

dannyboy

Hello Again, Got it working!!!! I now have all VOIP going through one specific WAN.. Thanks to Eugene and Sergejs...The trick was to make the mangle rule unset... To unset goto ip firewall mangle and print, than type unset, it will ask for the number and value-name, put connection-state on the value...

dannyboy

Hello Eugene, Well with your help I was able to make the VOIP work. Atleast I got further than before... Now when I make a call I can see that the Tx Rate goes up when I call on the VOIP Ethernet, but on the Rx Rate I get nothing. So some how I have it working one way, hehehe.. Now one question, wha...

dannyboy

IP FIREWALL EXPORT / ip firewall mangle add chain=prerouting src-address=192.168.10.0/24 dst-address=10.10.10.0/24 \ action=accept comment="" disabled=no add chain=prerouting src-address=192.168.10.0/24 dst-address=192.168.10.0/24 \ action=accept comment="" disabled=no add chain...

dannyboy

Hello, I have three WANs using the load balance configuration found on the wiki. One problem I have noticed is that once in a while the the WAN interface freezes up, this varies from WAN1 to WAN3. What I notice is that the RX Rate goes to Zero and only the TX Rate is functioning, when this is happen...

dannyboy

Hello, How do I create a "snippet"? I am not sure what that is.. If I could make this MT router to be accessed from another public IP it would be great, but since I did the config above I cant login to it from another Public IP address. I am not sure what all the code you sent me will do. ...

dannyboy

http://wiki.mikrotik.com/wiki/Load_Balancing I did what is on that link, it works fine when it comes to surfing the net. All my firewall mangle rules are working like they supposed to. Now I created a rule that detects traffic containing ports 5060-5061 udp and ports 10000-20000 udp, I made this rul...

dannyboy

thanks for the info I tried to do this but I see no traffic, also I use vonage and I see a couple of ip that show up. What I want to do for my clients, is to setup my mt to detect voip and to have that traffic use only one single wan for all voip. I have little bandwidth here in my country and I hav...

dannyboy

ok I see the ip, now I have four wans, I want to make all VOIP to go through one of my wans, so i need to make a mark routing where all connections to that ip uses that wan? I the voip server ip the dst or src address?

thanks

dannyboy

question,

how doyou know what is VOIP traffic?

dannyboy

hello,

my mt is blocking ares try to drop all p2p and see if that works for you.

dannyboy

yes, they are public ip addresses. Also I have a webserver on my network, it used to work fine before I did this config, now it does not work. I use this to show a "no pay" page once users have not paid the bill. This is the code I use: chain=dstnat dst-address=192.168.10.42 action=dst-nat...

dannyboy

Hello, Looks like the http://wiki.mikrotik.com/wiki/Load_Balancing will work better for me. I am using this config but there is a problem, if I try to login to my router from another location with either of my public ips I am not able to even ping that address. Can someone tell me why or what I need...

dannyboy

Ok, Inncom helped me o lot in setting up the load balance between the three Wans... Than we encounter ourselfs in a mission to get Vonage and VOIP to work through only one WAN. For some reason we could not get it to work. I appears that its using two of the Wans when a call its made through a Vonage...

dannyboy

Hello, I have put the code to use three WANs buit for some reason only two work... can someone login and tell me whats wrong with this setup? 165.98.168.4 165.98.144.47 165.98.213.25 user help pass help Also when I do a speedtest in numion, I get almost 1 meg downloas speed and 250 upload speed, but...

dannyboy

Sorry,

Another thing, I want to have one WAN to be used only for VOIP. I know I have to bond ports 5060-5061 to that wan but How do I do that? Can you explain or send me the code on how to do this?

Thanks

dannyboy

Hello, My load balance its working great!!!! Even with pppoe!!! Now I have one more question, I have another WAN I would like to use in my Load Balance router, I have read some of the stuff on this thread but I could not find a sure answer. add chain=prerouting in-interface=Local connection-state=ne...

dannyboy

thank you for your prompt response, so I cant use load balance using PPPOE? Also did you take a lool at the code, did I do something wrong? Why the srcnat only works with the odd packets not the even?

thanks again

dannyboy

Hello, I copy and paste the code to do load balance from the wiki. I than changed ip address with mine. I have problems!! First problem I have is that in src-nat I only see the nat rule for "Odd" having traffic, the "even" stays in 0 traffic. Second problem I have is that once I ...

dannyboy

Hello, I am using a PC MT Version 2.9.27 I am having a problem with one of my WAN interface. For some reason its freezing up and I have to disable it and enable it for it to start working. I have noticed that the interface suddenly only the TX Rate is transmiting and the RX Rate just stays in "...

dannyboy

Hello, Well the problem was fixed by doing this from another thread: Just a quick hint, i was having same problems, If you are running a static ip on your WAN interface then u have to enter a route manually too!!! I didnt know this because i used to use DHCP client for my WAN interface. the Route i ...

dannyboy

Hello, Well the problem was fixed by doing this from another thread: Just a quick hint, i was having same problems, If you are running a static ip on your WAN interface then u have to enter a route manually too!!! I didnt know this because i used to use DHCP client for my WAN interface. the Route i ...

dannyboy

Hello, Well the problem was fixed by doing this from another thread: Just a quick hint, i was having same problems, If you are running a static ip on your WAN interface then u have to enter a route manually too!!! I didnt know this because i used to use DHCP client for my WAN interface. the Route i ...

dannyboy

I am having a problem once I do this : http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways I set this up and some users with routers would connect fine and if they had a VOIP router they could use the VOIP but the problem was when they tried to surf the internet. They could not see a...

dannyboy

Hello, I tried this add chain=dst-nat n sr-address(the address of your client, in my case are static), protocol=tcp, src-port=0-65535, action=dst-nat, to address= 200.30.xxx.xx public Ip of webpage with the message, to ports=8080(my webserver is in 8080port) but the only difference is that my web se...

dannyboy

Hello, I think i am getting close to what I want to do!! I think policy routing is my solution but need clarification and explanation on how I would do this. I have 30 clients and two ISPs. I also use pppoe to connect my clients. I was thinking of creating two ip pools and two profiles. Profile #1 w...

dannyboy

Hello, I have 44 clients on my network, I also have 2 cable connections and I am using a third party router to do the load balance. "I rather use MT to do this" What I want to do is to setup my MT to split my users per connection. What I mean is that I will have 22 pppoe clients with a pro...

dannyboy

Hello, I have 44 clients on my network, I also have 2 cable connections and I am using a third party router to do the load balance. "I rather use MT to do this" What I want to do is to setup my MT to split my users per connection. What I mean is that I will have 22 pppoe clients with a pro...

dannyboy

can you send the way you did this ? I would like to do the same..

thanks

dannyboy

http://www.edimax.com

Works for me!! No problems at all

dannyboy

Thank you very much for your help!!! I have inputed the code and I am now testing it.

I wish you guys a great new year!! I hope we all get all the blessings we need!!

daniel

dannyboy

thanks for the quick response Tonda.. I will explain better what I want to do: I have a small ISP of 47 users in Nicaragua Central America. Right now I have p2p blocked from 7 am to 10 pm after 10 pm is unblocked. What I want to do is instead of completly blocking p2p from the network is to have it ...

dannyboy

Finally someone with a good actitude!! THANKS pedja!!!!! I have actualy stopped trying to do things with MT just because of all the arrogant people that just come in here to piss on us that dont know much... Is the day and still no answer to many posts I have created... This is what I think of all t...

dannyboy

I'm making a little booklet with pictures and simple examples, its taking me longer than I though... :( One example is "how to setup a pppoe server" "How to Block P2P" all this with winbox pictures. "How to masquerade"... I have been busy lately so I had to stop for a w...

dannyboy

Hello, I am doing load balancing with four wan ports and using MT!!! If you like info please email me at jdcallejas@hotmail.com.

dannyboy

Thanks for the information, I am using 2.9.5, either way I was able to setup what you told me and for some reason it still blocks that ip address from obtaining access to p2p. I tested it this way, I disable p2p block and limewire connects right then, I than modified the rule to this end enabled: 0 ...

dannyboy

Hello everyone, Everything working great with MT!! Yeah!! I would like some help on setting up the following: I have p2p blocked 24/7 but there is one client that I will give access to. Now I want to let this client with a specific ip address have access to all p2p but limit him to a 64k down and up...

dannyboy

Hello, I am having some problems with 2.9.6, first of all I cannot upgrade because it will not let me go into it through FTP. second, for some reason things I do to on the router keep disapearing, example of one, created 10 new ppp secrets and modified like 15 of them by adding a comment. The next d...

dannyboy

Hello, MT working great!! One thing that I dont understand why, I see the list of pppoe clients on interfaces, some have the conection with a number after it like this pppoe-user12 what is the mean? also sometimes I see this pppoe-374823628, instead of the user name it shows numbers and disconnects....

dannyboy

Thanks for the info but I read that feature and it seems to only work with two seperate routers. Atleast thats what I understood from the examples. Has anyone tried this before? Well to bond to ISPs WAN on the same router? Example" Wan 1 = DSL 1.5m Wan2= Cable=3m Now have two etherner cards wit...

dannyboy

Hello, I know early on there was a threat about Aggregating bandwidth by combining WAN lines. For some reason it was taken off. NOW, THE BIG QUESTIONS!!! IS IT STILL IMPOSSIBLE TO DO IN MT? Basicaly I want to do what edimax routers do, join the bandwitdth and also do load balance and failover. This ...

dannyboy

Hello infomate,

on the ftp after input the ursname and pass its asking for name to validate, I used robert, robert s, infomate and nothing works, how to get list.

Daniel

dannyboy

Thanks wildbill442, I am glad all is wotking for you, for some reason 2.9.5 is giving me lots of problems with signal and connections. I have decided to stick with 2.8.28. The problem with 2.9.X is that for some of you guys it works great and some it does not. I am not blaming anyone, I just think s...

dannyboy

thank you both for the input, but I still think 2.9.5 is not ready for action, I try to drop all p2p and I see no traffic being drop at all. I downloaded limewire and tested it myself and I could download music. Once I connected the 2.8.28 back I was blocked. Another thing, do any of you can help se...

dannyboy

Hello, I have been testing the 2.9.5 version of MT, I am trying to block all p2p traffic but this version does not work at all. Here is how I set it up: 0 chain=forward p2p=all-p2p action=drop I am not sure if I am missing something here. I looked at the 2.9 manual but I could not find anything on p...

dannyboy

Thanks, I understand what he means now, I will try that to see if it helps.

dannyboy

Hello, I want to priotirized my VOIP Vonage, I know that they use port 5061 UDP and 10000-20000. If I want to mangle this ports, how would it look like? "/ip firewall mangle ??????????????" can you help me out?

thanks

dannyboy

thanks, but since i am usugeesting a prism card that is only b I dont even get that choice. Any other sudgestions

dannyboy

Hello, I am still testing 2.9.4 and I found out that some pppoe clients cant connect and also that a client that detects 100% signal with 2.8.28 detects 0% with 2.9.4. I have no idea why is doing that. I checked to see if hide ssid was checked and no is was not. The wierd thing is that a client that...

dannyboy

I am not sure what I need to do, but what I want is to be able to see the configuration of my AP. I am using MT without wireless, and I have an AP connected to Ether2 with an ip address of 192.168.0.3. So, when ever I am on the ntwork all I have to do is put http://192.168.0.3 on my browser and I ge...

dannyboy

Hello, I would like to be able to see one of my AP that are behind my MT Router from a remote location. public IP: 24.136.46.174/27 local IP Network: 192.168.0.0/24 Device IP Address: 192.168.0.3 Example: I want to be in China and put in my browser my public Ip Address 24.136.46.174:???? (some port ...

dannyboy

I have a question, I would like to do the same as jdmarti1, but I noticed that when I create a profile in ppp profiles it creates a simple queue for each connection, now if I double click on that simple queue I can make the burst work but once the user disconnects its back to the profile rate. Now, ...

dannyboy

First of all I want to appoligize to all the MT tech team, I guess you guys are busy because of the incredible success MT OS has. Next time I cant figure something out I will leave the are for about 2 days!!! :) Came back fresh. Edzix, thanks for pointing that out, I guess I was burned and could not...

dannyboy

Offcourse I dont use the same values, but what can I say, I follow the instructions just like is explained on the manual and it does not work. at least for the p2p and the Equal bandwidth sharing among users for the 2.9.1.. Thats what I have tried so far. Something else for example, I am looking for...

dannyboy

Man, I am realy frustrated about the MT manuals, the examples they give you never work!!! I upgraded to 2.9.1, they have changed everything about scripting and even simple firewall rules.. It took me some time to figure out simple things. I goto try to do "Equal bandwidth sharing among users&qu...

Search found 195 matches