MikroTik

expo

bump for good measure =) thank you in advance!

expo

EDIT: I've been advised by others on facebook that CCR2xxx hardware will misbehave with anything more than about 1.5m-2m routes received, this sounds like it could be the cause of my issues below, I'm taking 2 full tables + 15 peers so about 2.5-3m routes with l3hw disabled, maybe these routers aren...

expo

On a vlan facing IX we are getting a ton of log spam about "radvd invalid mtu 9000" etc, obviously it's a peer on the IX with a invalid mtu (IX only 1500), is there anyway to suppress or filter this without disabling ipv6?

expo

We would really love to see a ATL with EG18-NA for us North Americans!!

expo

I have about ten units in production, I have one that as soon as it gets exposed to the layer2 domain instantly reboots, replaced with a new unit & duplicate config, all good, 1 down, another unit is reporting no disk space available but has nothing in files and only the main package nothing els...

expo

Make sure you did it right:

/system routerboard settings
set auto-upgrade=yes

/system/routerboard> print
routerboard: yes
factory-firmware: 6.45.9
current-firmware: 7.11.2
upgrade-firmware: 7.11.2

That step is optional

expo

Why the hell are you using v7.10rc1 in the first place? Move to latest stable or latest beta.

I found it so funny that running code from 3-4 months ago is "really old" haha, but 7.11.2 did resolve this! (Funny that nothing in the changelog though!!! Freaking Mikrotik!)

expo

Ensuring proper BGP affinity input/output on all BGP peers based on this: https://www.youtube.com/watch?v=py4up-lO8zY&pp=ygUMQkdQIGFmZmluaXR5 No problem with BGP advertisement on ROS v7.11.2. Did you try it at production ? My announcements with filters also go away within 6-10 minutes after the...

expo

Ensuring proper BGP affinity input/output on all BGP peers based on this: https://www.youtube.com/watch?v=py4up-lO8zY&pp=ygUMQkdQIGFmZmluaXR5 No problem with BGP advertisement on ROS v7.11.2. Hard to believe it can chew 1m routes in under 30 seconds but needs 10 minutes to advertise a few prefi...

expo

Why the hell are you using v7.10rc1 in the first place? Move to latest stable or latest beta.

Because it has been working and stable, has the specific issue been identified and patched in a future upgrade?

expo

Has anyone experienced an issue where bgp announcements are delayed for ~6-10 minutes? is this a known problem? From time of session up, monitoring using multiple different remote peer devices I'm seeing no announcements until about 6-10minutes after the session establishes? Thank you for your feedb...

expo

bump for RFC 2439 / route dampening

expo

expo

Having similar behavior on the 2216 locking up and watchdog is enabled. Not even console will respond. Still investigating config.

expo

Anyone noticed lockups on CCR2216 on 7.9beta4? Not sure yet if it's hardware or software related but usually since watchdog is enabled you would get a reboot, no response on console either...

expo

Yeah I actually have the same issue with Windows not working

expo

/ip ipsec mode-config add address-pool=dhcp_pool1 name=IKEv2 /ip ipsec policy group add name=group-IKEv2 /ip ipsec profile add dh-group=modp2048,modp1536,modp1024 enc-algorithm=aes-256,aes-192,aes-128 \ hash-algorithm=sha256 name=profile-IKEv2 /ip ipsec peer add exchange-mode=ike2 name=peer-IKEv2 pa...

expo

awesome! Thank you. I was able to skip all of the certificates i didn't use this part, or make any certificates, it works fine with PSK /ip ipsec identity add auth-method=rsa-signature certificate=server.crt_0 generate-policy=port-override \ match-by=certificate mode-config=cfg-IKEv2 peer=peer-IKEv2...

expo

same issues on 1036 with 7.2.1 and 7.4

expo

same issues on 1036 with 7.2.1 and 7.4

expo

we are also getting kernel failure and connection tracking table full on 1036 using 7.2.1 and 7.4

expo

We have CCR1036 also randomly rebooting with 'probably kernel failure' as well as 'connection tracking table full' on both 7.2.1 and 7.4, support stated it was fixed in "v7.3beta" but nothing in the changelog that I could find, maybe 7.5beta will fix? max-entries isn't full, and available ...

expo

issue solved it was just a matter of enabling fec 91 in the port mikrotik support answered the request with instructions now WAN port is 40g and LAN port is 100g How is the performance so far? Would you be willing to share any additional information regarding your setup and what kind of switch you ...

expo

Remove this filter. You should not make advertisements for Cymru add action=accept bgp-communities="" chain=UTRS-OUT disabled=yes prefix-length=32 set-bgp-communities=no-export,MYOWNAS:0 set-out-nexthop=192.0.2.1 Don't remove, advertising 25-32 prefixes to URTS is the whole point of the s...

expo

Bump we really need this as a bridge until v7 is ready for production! Please add xl710 drivers for v6!!

expo

Make sure you only have one bridge defined and it has the H designated to show it's hardware based, if you define more than one bridge the second one will be using the CPU of the switch which is not capable of much traffic.

expo

I'm not sure I understand your post but if you are trying to use PCI pass through function with router OS version 6 most likely it will not work unless you are using a very old card that has supported drivers. Ros V7 works better for this but is not production ready. You can use vxmnet3 instead of P...

expo

I have this exact issue on a crs210 and when replaced with new it's still occuring. Every week or so the switch will randomly stop passing traffic, some traffic will still pass approximately 5% of the normal traffic volume, access to the switch via win box is never a problem and always works fine a ...

expo

chr with proxmox is a disaster, I've been attempting for a year now lol. Few things to try; PCI Passthrough Try ovs instead of linux bridges Try vmxnet3 instead of virtio Have you tried RouterOS v7 ? It has newer drivers with multi-queue support. I've been considering this, but given all of the fea...

expo

Baltic Vengeance 2 & 3 routers tested (i7-8700k + i9-9900k) using proxmox 6.3, tested both xl710 and 82599ES using multiqueue in proxmox and vitio drivers, performance is fine until about 2-3 gbps , I also tried rps off / on as well as multi-queue interface queues, all of the results are similar...

expo

chr with proxmox is a disaster, I've been attempting for a year now lol.

Few things to try;

PCI Passthrough
Try ovs instead of linux bridges
Try vmxnet3 instead of virtio

expo

also interested to know how you will automate prefix withdrawl from your primary providers while advertising /24's to the scrubbing center, I'm using fastnetmon, can this be done without custom code via mikrotik api?

expo

What Level CHR license are you using?

P1 License allows only for 1GB per interface.

Unlimited CHR license, this seems to be related to possibly proxmox/kvm implementation of the driver, or possibly a chr driver?

Throughput issue goes away with PCI Passthrough...

expo

Hi I am trying to run a Mikrotik CHR instance in the following configuration Server - CPU- CLX 6210U 1P 20C/40T 2.5G 27.5M 10.4GT 150W 3647 RAM - 64 GB LAN CARD - Intel 82599ES 10 Gigabit SFI/SFP+ Network Connection ( rev 01 ) OS - CentOS 8.2 Virtualization platform - KVM Problem is that server LAN...

expo

Thank you, I will try that.

expo

I was actually thinking about this, I'm glad you mentioned it. Do you use your normal (external) AS# for Fastnetmon's connection to your router? I'm guessing yes otherwise you need a second instance? I have fastnetmon setup and upon detection of ddos it sends /32 with 65001:666 via bgp to my CHR, I ...

expo

I have fastnetmon setup and upon detection of ddos it sends /32 with 65001:666 via bgp to my CHR, I have FNM setup as a peer with it's own instance but for some reason the route doesn't seem to show when I run /routing bgp advertisements print peer=MYPEER so I'm assuming I have something in the conf...

expo

Feature request;

HA feature that will synchronize configuration and connection state between two routers for a active/standby type of network.

See this HA script for inspiration;

https://github.com/svlsResearch/ha-mikrotik

Would like this deployed as a official feature of Ros

expo

expo /interface lte at-chat lte1 input="AT+QMBNCFG=\"AutoSel\",0" /interface lte at-chat lte1 input="AT+QMBNCFG=\"Deactivate\"" What purpose are from that commands, support from quectel never mention them in my cases. MBN - those are files with firmware progr...

expo

Amazing, thank you. I've been trying different formatting for ten of hours! /interface lte at-chat lte1 input="AT+QMBNCFG=\"AutoSel\",0" /interface lte at-chat lte1 input="AT+QMBNCFG=\"Deactivate\"" /interface lte at-chat lte1 input="AT+CFUN=1,1" mea...

expo

Need help to figure out correct at-chat command formatting or how to turn off the cli rejecting commands that should be correct? example; /interface lte at-chat lte1 input=ati output: Quectel EP06 Revision: EP06ALAR02A07M4G OK Works fine, but I need to input these commands that aren't accepted by th...

expo

we power directly with a custom made plate that holds a phoenix connector on the back in the ac psu location, I know for sure 22-28 but I suspect probably 18-30vdc

expo

My ccr is giving me a minimum version of 6.35.4, do you have any idea if this will work instead of 6.35? I can netinstall but I'm afraid of bricking it.

So you were seeing the same behavior?

expo

I recently upgraded from a CCR1009 to a CCR1036, during the upgrade I took my ISP connections (2) and my backhauls (2) and trunked them through a 10g switch in/out of the CCR. (previously everything was assigned/sitting directly on the physical interfaces) upon installation I've noticed for the last...

expo

I see, so what has it been 5 years now? Are we still buying inventory that was made during the initial production batch?

expo

Yes I'm aware of all the alternate options but I'm just confused why the 1009 has dual psu but the 1036 does not, so stupid. Then initially they included a second psu header then later removed it but left the circuitry to support a header and second psu now they have removed the circuity and I bet t...

expo

Oh and I found this out after buying the mean well power supply, paid to have a 3d printed base , ordered a iec connector and 3 different types of connectors for the ac DC psu and the ccr PCB .. thanks mikrotik you guys really are something!!!

expo

I can confirm as of 9/2016 the ccr1036 no longer has two regulators on the board, even if you install a connector to the missing PCB holes it will not power the router on the second connector at all

expo

Any update as to when we might see the CCR1072 shipping and any estimates on the price?

Thanks,

TJ

expo

welcome to the dead CCR1009 club, you are member #422. Although Mikrotik support will not acknowledge any problems with CCR1009. Mine arrived dead inside of the box. Several of my friends have experienced the same thing (6-20 hours before failure). This has all been on the 1S+ model for us

expo

Hello, I'm starting a WISP, I just received V-DSL service with 128 static ip addresses. How can i setup my network so that i may distribute static ip's for some customers, multiple static ip's (5), and do NAT for some customers (residential) I appreciate any input you may offer, I've searched and se...

expo

Hello Normis,

Wireless orbit is a hosted radius hotspot solution for hotspot providers and WISP(s).

www.wirelessorbit.com

Thanks,

TJ

expo

I'm trying to setup wireless orbit on my mikrotik 455 router. I have a cable modem with a static ip (1 address). How do i setup my mikrotik router before i follow these instructions : http://wiki.wirelessorbit.com/wiki/index.php/MikroTik_Configuration_(WinBox) I need to configure ether1 with my ip a...

expo

Hello, at my home i have adsl with one (1) dynamic ip address. I need to have static ip addresses at my home, so i am planning on co-locating a mikrotik routerboard in a datacenter/noc that can supply static ip addresses for me. I would like to tunnel two routerboards together for this purpose. Can ...

Search found 54 matches